atl2: add atl2 driver

Driver for Atheros L2 10/100 network device. Includes necessary
changes for Kconfig, Makefile, and pci_ids.h.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Chris Snook 2008-09-14 19:56:10 -05:00 committed by Jeff Garzik
parent 63f2c04648
commit 452c1ce218
6 changed files with 3672 additions and 0 deletions

View file

@ -1840,6 +1840,17 @@ config NE_H8300
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
config ATL2
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
select CRC32
select MII
help
This driver supports the Atheros L2 fast ethernet adapter.
To compile this driver as a module, choose M here. The module
will be called atl2.
source "drivers/net/fs_enet/Kconfig"
endif # NET_ETHERNET

View file

@ -15,6 +15,7 @@ obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_ATL1) += atlx/
obj-$(CONFIG_ATL2) += atlx/
obj-$(CONFIG_ATL1E) += atl1e/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_TEHUTI) += tehuti.o

View file

@ -1 +1,3 @@
obj-$(CONFIG_ATL1) += atl1.o
obj-$(CONFIG_ATL2) += atl2.o

3127
drivers/net/atlx/atl2.c Normal file

File diff suppressed because it is too large Load diff

530
drivers/net/atlx/atl2.h Normal file
View file

@ -0,0 +1,530 @@
/* atl2.h -- atl2 driver definitions
*
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
* Copyright(c) 2006 xiong huang <xiong.huang@atheros.com>
* Copyright(c) 2007 Chris Snook <csnook@redhat.com>
*
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef _ATL2_H_
#define _ATL2_H_
#include <asm/atomic.h>
#include <linux/netdevice.h>
#ifndef _ATL2_HW_H_
#define _ATL2_HW_H_
#ifndef _ATL2_OSDEP_H_
#define _ATL2_OSDEP_H_
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/if_ether.h>
#include "atlx.h"
#ifdef ETHTOOL_OPS_COMPAT
extern int ethtool_ioctl(struct ifreq *ifr);
#endif
#define PCI_COMMAND_REGISTER PCI_COMMAND
#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
#define ETH_ADDR_LEN ETH_ALEN
#define ATL2_WRITE_REG(a, reg, value) (iowrite32((value), \
((a)->hw_addr + (reg))))
#define ATL2_WRITE_FLUSH(a) (ioread32((a)->hw_addr))
#define ATL2_READ_REG(a, reg) (ioread32((a)->hw_addr + (reg)))
#define ATL2_WRITE_REGB(a, reg, value) (iowrite8((value), \
((a)->hw_addr + (reg))))
#define ATL2_READ_REGB(a, reg) (ioread8((a)->hw_addr + (reg)))
#define ATL2_WRITE_REGW(a, reg, value) (iowrite16((value), \
((a)->hw_addr + (reg))))
#define ATL2_READ_REGW(a, reg) (ioread16((a)->hw_addr + (reg)))
#define ATL2_WRITE_REG_ARRAY(a, reg, offset, value) \
(iowrite32((value), (((a)->hw_addr + (reg)) + ((offset) << 2))))
#define ATL2_READ_REG_ARRAY(a, reg, offset) \
(ioread32(((a)->hw_addr + (reg)) + ((offset) << 2)))
#endif /* _ATL2_OSDEP_H_ */
struct atl2_adapter;
struct atl2_hw;
/* function prototype */
static s32 atl2_reset_hw(struct atl2_hw *hw);
static s32 atl2_read_mac_addr(struct atl2_hw *hw);
static s32 atl2_init_hw(struct atl2_hw *hw);
static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
u16 *duplex);
static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr);
static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value);
static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data);
static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data);
static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value);
static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value);
static void atl2_set_mac_addr(struct atl2_hw *hw);
static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue);
static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value);
static s32 atl2_phy_init(struct atl2_hw *hw);
static int atl2_check_eeprom_exist(struct atl2_hw *hw);
static void atl2_force_ps(struct atl2_hw *hw);
/* register definition */
/* Block IDLE Status Register */
#define IDLE_STATUS_RXMAC 1 /* 1: RXMAC is non-IDLE */
#define IDLE_STATUS_TXMAC 2 /* 1: TXMAC is non-IDLE */
#define IDLE_STATUS_DMAR 8 /* 1: DMAR is non-IDLE */
#define IDLE_STATUS_DMAW 4 /* 1: DMAW is non-IDLE */
/* MDIO Control Register */
#define MDIO_WAIT_TIMES 10
/* MAC Control Register */
#define MAC_CTRL_DBG_TX_BKPRESURE 0x100000 /* 1: TX max backoff */
#define MAC_CTRL_MACLP_CLK_PHY 0x8000000 /* 1: 25MHz from phy */
#define MAC_CTRL_HALF_LEFT_BUF_SHIFT 28
#define MAC_CTRL_HALF_LEFT_BUF_MASK 0xF /* MAC retry buf x32B */
/* Internal SRAM Partition Register */
#define REG_SRAM_TXRAM_END 0x1500 /* Internal tail address of TXRAM
* default: 2byte*1024 */
#define REG_SRAM_RXRAM_END 0x1502 /* Internal tail address of RXRAM
* default: 2byte*1024 */
/* Descriptor Control register */
#define REG_TXD_BASE_ADDR_LO 0x1544 /* The base address of the Transmit
* Data Mem low 32-bit(dword align) */
#define REG_TXD_MEM_SIZE 0x1548 /* Transmit Data Memory size(by
* double word , max 256KB) */
#define REG_TXS_BASE_ADDR_LO 0x154C /* The base address of the Transmit
* Status Memory low 32-bit(dword word
* align) */
#define REG_TXS_MEM_SIZE 0x1550 /* double word unit, max 4*2047
* bytes. */
#define REG_RXD_BASE_ADDR_LO 0x1554 /* The base address of the Transmit
* Status Memory low 32-bit(unit 8
* bytes) */
#define REG_RXD_BUF_NUM 0x1558 /* Receive Data & Status Memory buffer
* number (unit 1536bytes, max
* 1536*2047) */
/* DMAR Control Register */
#define REG_DMAR 0x1580
#define DMAR_EN 0x1 /* 1: Enable DMAR */
/* TX Cur-Through (early tx threshold) Control Register */
#define REG_TX_CUT_THRESH 0x1590 /* TxMac begin transmit packet
* threshold(unit word) */
/* DMAW Control Register */
#define REG_DMAW 0x15A0
#define DMAW_EN 0x1
/* Flow control register */
#define REG_PAUSE_ON_TH 0x15A8 /* RXD high watermark of overflow
* threshold configuration register */
#define REG_PAUSE_OFF_TH 0x15AA /* RXD lower watermark of overflow
* threshold configuration register */
/* Mailbox Register */
#define REG_MB_TXD_WR_IDX 0x15f0 /* double word align */
#define REG_MB_RXD_RD_IDX 0x15F4 /* RXD Read index (unit: 1536byets) */
/* Interrupt Status Register */
#define ISR_TIMER 1 /* Interrupt when Timer counts down to zero */
#define ISR_MANUAL 2 /* Software manual interrupt, for debug. Set
* when SW_MAN_INT_EN is set in Table 51
* Selene Master Control Register
* (Offset 0x1400). */
#define ISR_RXF_OV 4 /* RXF overflow interrupt */
#define ISR_TXF_UR 8 /* TXF underrun interrupt */
#define ISR_TXS_OV 0x10 /* Internal transmit status buffer full
* interrupt */
#define ISR_RXS_OV 0x20 /* Internal receive status buffer full
* interrupt */
#define ISR_LINK_CHG 0x40 /* Link Status Change Interrupt */
#define ISR_HOST_TXD_UR 0x80
#define ISR_HOST_RXD_OV 0x100 /* Host rx data memory full , one pulse */
#define ISR_DMAR_TO_RST 0x200 /* DMAR op timeout interrupt. SW should
* do Reset */
#define ISR_DMAW_TO_RST 0x400
#define ISR_PHY 0x800 /* phy interrupt */
#define ISR_TS_UPDATE 0x10000 /* interrupt after new tx pkt status written
* to host */
#define ISR_RS_UPDATE 0x20000 /* interrupt ater new rx pkt status written
* to host. */
#define ISR_TX_EARLY 0x40000 /* interrupt when txmac begin transmit one
* packet */
#define ISR_TX_EVENT (ISR_TXF_UR | ISR_TXS_OV | ISR_HOST_TXD_UR |\
ISR_TS_UPDATE | ISR_TX_EARLY)
#define ISR_RX_EVENT (ISR_RXF_OV | ISR_RXS_OV | ISR_HOST_RXD_OV |\
ISR_RS_UPDATE)
#define IMR_NORMAL_MASK (\
/*ISR_LINK_CHG |*/\
ISR_MANUAL |\
ISR_DMAR_TO_RST |\
ISR_DMAW_TO_RST |\
ISR_PHY |\
ISR_PHY_LINKDOWN |\
ISR_TS_UPDATE |\
ISR_RS_UPDATE)
/* Receive MAC Statistics Registers */
#define REG_STS_RX_PAUSE 0x1700 /* Num pause packets received */
#define REG_STS_RXD_OV 0x1704 /* Num frames dropped due to RX
* FIFO overflow */
#define REG_STS_RXS_OV 0x1708 /* Num frames dropped due to RX
* Status Buffer Overflow */
#define REG_STS_RX_FILTER 0x170C /* Num packets dropped due to
* address filtering */
/* MII definitions */
/* PHY Common Register */
#define MII_SMARTSPEED 0x14
#define MII_DBG_ADDR 0x1D
#define MII_DBG_DATA 0x1E
/* PCI Command Register Bit Definitions */
#define PCI_REG_COMMAND 0x04
#define CMD_IO_SPACE 0x0001
#define CMD_MEMORY_SPACE 0x0002
#define CMD_BUS_MASTER 0x0004
#define MEDIA_TYPE_100M_FULL 1
#define MEDIA_TYPE_100M_HALF 2
#define MEDIA_TYPE_10M_FULL 3
#define MEDIA_TYPE_10M_HALF 4
#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x000F /* Everything */
/* The size (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE 14
#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */
#define ETHERNET_FCS_SIZE 4
#define MAX_JUMBO_FRAME_SIZE 0x2000
#define VLAN_SIZE 4
struct tx_pkt_header {
unsigned pkt_size:11;
unsigned:4; /* reserved */
unsigned ins_vlan:1; /* txmac should insert vlan */
unsigned short vlan; /* vlan tag */
};
/* FIXME: replace above bitfields with MASK/SHIFT defines below */
#define TX_PKT_HEADER_SIZE_MASK 0x7FF
#define TX_PKT_HEADER_SIZE_SHIFT 0
#define TX_PKT_HEADER_INS_VLAN_MASK 0x1
#define TX_PKT_HEADER_INS_VLAN_SHIFT 15
#define TX_PKT_HEADER_VLAN_TAG_MASK 0xFFFF
#define TX_PKT_HEADER_VLAN_TAG_SHIFT 16
struct tx_pkt_status {
unsigned pkt_size:11;
unsigned:5; /* reserved */
unsigned ok:1; /* current packet transmitted without error */
unsigned bcast:1; /* broadcast packet */
unsigned mcast:1; /* multicast packet */
unsigned pause:1; /* transmiited a pause frame */
unsigned ctrl:1;
unsigned defer:1; /* current packet is xmitted with defer */
unsigned exc_defer:1;
unsigned single_col:1;
unsigned multi_col:1;
unsigned late_col:1;
unsigned abort_col:1;
unsigned underun:1; /* current packet is aborted
* due to txram underrun */
unsigned:3; /* reserved */
unsigned update:1; /* always 1'b1 in tx_status_buf */
};
/* FIXME: replace above bitfields with MASK/SHIFT defines below */
#define TX_PKT_STATUS_SIZE_MASK 0x7FF
#define TX_PKT_STATUS_SIZE_SHIFT 0
#define TX_PKT_STATUS_OK_MASK 0x1
#define TX_PKT_STATUS_OK_SHIFT 16
#define TX_PKT_STATUS_BCAST_MASK 0x1
#define TX_PKT_STATUS_BCAST_SHIFT 17
#define TX_PKT_STATUS_MCAST_MASK 0x1
#define TX_PKT_STATUS_MCAST_SHIFT 18
#define TX_PKT_STATUS_PAUSE_MASK 0x1
#define TX_PKT_STATUS_PAUSE_SHIFT 19
#define TX_PKT_STATUS_CTRL_MASK 0x1
#define TX_PKT_STATUS_CTRL_SHIFT 20
#define TX_PKT_STATUS_DEFER_MASK 0x1
#define TX_PKT_STATUS_DEFER_SHIFT 21
#define TX_PKT_STATUS_EXC_DEFER_MASK 0x1
#define TX_PKT_STATUS_EXC_DEFER_SHIFT 22
#define TX_PKT_STATUS_SINGLE_COL_MASK 0x1
#define TX_PKT_STATUS_SINGLE_COL_SHIFT 23
#define TX_PKT_STATUS_MULTI_COL_MASK 0x1
#define TX_PKT_STATUS_MULTI_COL_SHIFT 24
#define TX_PKT_STATUS_LATE_COL_MASK 0x1
#define TX_PKT_STATUS_LATE_COL_SHIFT 25
#define TX_PKT_STATUS_ABORT_COL_MASK 0x1
#define TX_PKT_STATUS_ABORT_COL_SHIFT 26
#define TX_PKT_STATUS_UNDERRUN_MASK 0x1
#define TX_PKT_STATUS_UNDERRUN_SHIFT 27
#define TX_PKT_STATUS_UPDATE_MASK 0x1
#define TX_PKT_STATUS_UPDATE_SHIFT 31
struct rx_pkt_status {
unsigned pkt_size:11; /* packet size, max 2047 bytes */
unsigned:5; /* reserved */
unsigned ok:1; /* current packet received ok without error */
unsigned bcast:1; /* current packet is broadcast */
unsigned mcast:1; /* current packet is multicast */
unsigned pause:1;
unsigned ctrl:1;
unsigned crc:1; /* received a packet with crc error */
unsigned code:1; /* received a packet with code error */
unsigned runt:1; /* received a packet less than 64 bytes
* with good crc */
unsigned frag:1; /* received a packet less than 64 bytes
* with bad crc */
unsigned trunc:1; /* current frame truncated due to rxram full */
unsigned align:1; /* this packet is alignment error */
unsigned vlan:1; /* this packet has vlan */
unsigned:3; /* reserved */
unsigned update:1;
unsigned short vtag; /* vlan tag */
unsigned:16;
};
/* FIXME: replace above bitfields with MASK/SHIFT defines below */
#define RX_PKT_STATUS_SIZE_MASK 0x7FF
#define RX_PKT_STATUS_SIZE_SHIFT 0
#define RX_PKT_STATUS_OK_MASK 0x1
#define RX_PKT_STATUS_OK_SHIFT 16
#define RX_PKT_STATUS_BCAST_MASK 0x1
#define RX_PKT_STATUS_BCAST_SHIFT 17
#define RX_PKT_STATUS_MCAST_MASK 0x1
#define RX_PKT_STATUS_MCAST_SHIFT 18
#define RX_PKT_STATUS_PAUSE_MASK 0x1
#define RX_PKT_STATUS_PAUSE_SHIFT 19
#define RX_PKT_STATUS_CTRL_MASK 0x1
#define RX_PKT_STATUS_CTRL_SHIFT 20
#define RX_PKT_STATUS_CRC_MASK 0x1
#define RX_PKT_STATUS_CRC_SHIFT 21
#define RX_PKT_STATUS_CODE_MASK 0x1
#define RX_PKT_STATUS_CODE_SHIFT 22
#define RX_PKT_STATUS_RUNT_MASK 0x1
#define RX_PKT_STATUS_RUNT_SHIFT 23
#define RX_PKT_STATUS_FRAG_MASK 0x1
#define RX_PKT_STATUS_FRAG_SHIFT 24
#define RX_PKT_STATUS_TRUNK_MASK 0x1
#define RX_PKT_STATUS_TRUNK_SHIFT 25
#define RX_PKT_STATUS_ALIGN_MASK 0x1
#define RX_PKT_STATUS_ALIGN_SHIFT 26
#define RX_PKT_STATUS_VLAN_MASK 0x1
#define RX_PKT_STATUS_VLAN_SHIFT 27
#define RX_PKT_STATUS_UPDATE_MASK 0x1
#define RX_PKT_STATUS_UPDATE_SHIFT 31
#define RX_PKT_STATUS_VLAN_TAG_MASK 0xFFFF
#define RX_PKT_STATUS_VLAN_TAG_SHIFT 32
struct rx_desc {
struct rx_pkt_status status;
unsigned char packet[1536-sizeof(struct rx_pkt_status)];
};
enum atl2_speed_duplex {
atl2_10_half = 0,
atl2_10_full = 1,
atl2_100_half = 2,
atl2_100_full = 3
};
struct atl2_spi_flash_dev {
const char *manu_name; /* manufacturer id */
/* op-code */
u8 cmdWRSR;
u8 cmdREAD;
u8 cmdPROGRAM;
u8 cmdWREN;
u8 cmdWRDI;
u8 cmdRDSR;
u8 cmdRDID;
u8 cmdSECTOR_ERASE;
u8 cmdCHIP_ERASE;
};
/* Structure containing variables used by the shared code (atl2_hw.c) */
struct atl2_hw {
u8 __iomem *hw_addr;
void *back;
u8 preamble_len;
u8 max_retry; /* Retransmission maximum, afterwards the
* packet will be discarded. */
u8 jam_ipg; /* IPG to start JAM for collision based flow
* control in half-duplex mode. In unit of
* 8-bit time. */
u8 ipgt; /* Desired back to back inter-packet gap. The
* default is 96-bit time. */
u8 min_ifg; /* Minimum number of IFG to enforce in between
* RX frames. Frame gap below such IFP is
* dropped. */
u8 ipgr1; /* 64bit Carrier-Sense window */
u8 ipgr2; /* 96-bit IPG window */
u8 retry_buf; /* When half-duplex mode, should hold some
* bytes for mac retry . (8*4bytes unit) */
u16 fc_rxd_hi;
u16 fc_rxd_lo;
u16 lcol; /* Collision Window */
u16 max_frame_size;
u16 MediaType;
u16 autoneg_advertised;
u16 pci_cmd_word;
u16 mii_autoneg_adv_reg;
u32 mem_rang;
u32 txcw;
u32 mc_filter_type;
u32 num_mc_addrs;
u32 collision_delta;
u32 tx_packet_delta;
u16 phy_spd_default;
u16 device_id;
u16 vendor_id;
u16 subsystem_id;
u16 subsystem_vendor_id;
u8 revision_id;
/* spi flash */
u8 flash_vendor;
u8 dma_fairness;
u8 mac_addr[NODE_ADDRESS_SIZE];
u8 perm_mac_addr[NODE_ADDRESS_SIZE];
/* FIXME */
/* bool phy_preamble_sup; */
bool phy_configured;
};
#endif /* _ATL2_HW_H_ */
struct atl2_ring_header {
/* pointer to the descriptor ring memory */
void *desc;
/* physical adress of the descriptor ring */
dma_addr_t dma;
/* length of descriptor ring in bytes */
unsigned int size;
};
/* board specific private data structure */
struct atl2_adapter {
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
struct net_device_stats net_stats;
#ifdef NETIF_F_HW_VLAN_TX
struct vlan_group *vlgrp;
#endif
u32 wol;
u16 link_speed;
u16 link_duplex;
spinlock_t stats_lock;
spinlock_t tx_lock;
struct work_struct reset_task;
struct work_struct link_chg_task;
struct timer_list watchdog_timer;
struct timer_list phy_config_timer;
unsigned long cfg_phy;
bool mac_disabled;
/* All Descriptor memory */
dma_addr_t ring_dma;
void *ring_vir_addr;
int ring_size;
struct tx_pkt_header *txd_ring;
dma_addr_t txd_dma;
struct tx_pkt_status *txs_ring;
dma_addr_t txs_dma;
struct rx_desc *rxd_ring;
dma_addr_t rxd_dma;
u32 txd_ring_size; /* bytes per unit */
u32 txs_ring_size; /* dwords per unit */
u32 rxd_ring_size; /* 1536 bytes per unit */
/* read /write ptr: */
/* host */
u32 txd_write_ptr;
u32 txs_next_clear;
u32 rxd_read_ptr;
/* nic */
atomic_t txd_read_ptr;
atomic_t txs_write_ptr;
u32 rxd_write_ptr;
/* Interrupt Moderator timer ( 2us resolution) */
u16 imt;
/* Interrupt Clear timer (2us resolution) */
u16 ict;
unsigned long flags;
/* structs defined in atl2_hw.h */
u32 bd_number; /* board number */
bool pci_using_64;
bool have_msi;
struct atl2_hw hw;
u32 usr_cmd;
/* FIXME */
/* u32 regs_buff[ATL2_REGS_LEN]; */
u32 pci_state[16];
u32 *config_space;
};
enum atl2_state_t {
__ATL2_TESTING,
__ATL2_RESETTING,
__ATL2_DOWN
};
#endif /* _ATL2_H_ */

View file

@ -2213,6 +2213,7 @@
#define PCI_VENDOR_ID_ATTANSIC 0x1969
#define PCI_DEVICE_ID_ATTANSIC_L1 0x1048
#define PCI_DEVICE_ID_ATTANSIC_L2 0x2048
#define PCI_VENDOR_ID_JMICRON 0x197B
#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360