Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

fix typos concerning "initiali[zs]e"

Browse source 
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Uwe Kleine-König 2010-06-11 12:17:00 +02:00 committed by Jiri Kosina
parent 65155b3708
commit 421f91d21a
66 changed files with 90 additions and 90 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
arch/arm/mach-msm/acpuclock-arm11.c
View file

@ -98,7 +98,7 @@ struct clkctl_acpu_speed {
/*
* ACPU speed table. Complete table is shown but certain speeds are commented
* out to optimized speed switching. Initalize loops_per_jiffy to 0.
* out to optimized speed switching. Initialize loops_per_jiffy to 0.
*
* Table stepping up/down is optimized for 256mhz jumps while staying on the
* same PLL.
@ -494,7 +494,7 @@ uint32_t acpuclk_get_switch_time(void)
* Clock driver initialization
*---------------------------------------------------------------------------*/
/* Initalize the lpj field in the acpu_freq_tbl. */
/* Initialize the lpj field in the acpu_freq_tbl. */
static void __init lpj_init(void)
{
int i;

2
arch/arm/mach-u300/gpio.c
View file

@ -523,7 +523,7 @@ static void gpio_set_initial_values(void)
/*
* Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
* to output and 'GPIO_IN' to input for each port. And initalize
* to output and 'GPIO_IN' to input for each port. And initialize
* default value on outputs.
*/
for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {

2
arch/arm/plat-s3c24xx/clock.c
View file

@ -43,7 +43,7 @@
#include <plat/cpu.h>
#include <plat/pll.h>
/* initalise all the clocks */
/* initialise all the clocks */
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,

2
arch/arm/plat-samsung/clock.c
View file

@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
(clkp->enable)(clkp, 0);
}
/* initalise all the clocks */
/* initialise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{

2
arch/h8300/kernel/timer/itu.c
View file

@ -73,7 +73,7 @@ void __init h8300_timer_setup(void)
setup_irq(ITUIRQ, &itu_irq);
/* initalize timer */
/* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, ITUBASE + TCR);
ctrl_outb(0x01, ITUBASE + TIER);

2
arch/h8300/kernel/timer/timer16.c
View file

@ -68,7 +68,7 @@ void __init h8300_timer_setup(void)
setup_irq(_16IRQ, &timer16_irq);
/* initalize timer */
/* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, _16BASE + TCR);
ctrl_outw(cnt, _16BASE + GRA);

2
arch/h8300/kernel/timer/timer8.c
View file

@ -94,7 +94,7 @@ void __init h8300_timer_setup(void)
ctrl_bclr(0, MSTPCRL)
#endif
/* initalize timer */
/* initialize timer */
ctrl_outw(cnt, _8BASE + TCORA);
ctrl_outw(0x0000, _8BASE + _8TCSR);
ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,

6
arch/ia64/kvm/kvm-ia64.c
View file

@ -1234,7 +1234,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
p_ctx->cr[2] = (unsigned long)kvm_vmm_info->vmm_ivt;
p_ctx->cr[8] = 0x3c;
/*Initilize region register*/
/*Initialize region register*/
p_ctx->rr[0] = 0x30;
p_ctx->rr[1] = 0x30;
p_ctx->rr[2] = 0x30;
@ -1243,7 +1243,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
p_ctx->rr[5] = 0x30;
p_ctx->rr[7] = 0x30;
/*Initilize branch register 0*/
/*Initialize branch register 0*/
p_ctx->br[0] = *(unsigned long *)kvm_vmm_info->vmm_entry;
vcpu->arch.vmm_rr = kvm->arch.vmm_init_rr;
@ -1702,7 +1702,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
BUG_ON(!module);
if (!kvm_vmm_base) {
printk("kvm: kvm area hasn't been initilized yet!!\n");
printk("kvm: kvm area hasn't been initialized yet!!\n");
return -EFAULT;
}

2
arch/ia64/sn/kernel/setup.c
View file

@ -507,7 +507,7 @@ static void __init sn_init_pdas(char **cmdline_p)
cnodeid_t cnode;
/*
* Allocate & initalize the nodepda for each node.
* Allocate & initialize the nodepda for each node.
*/
for_each_online_node(cnode) {
nodepdaindr[cnode] =

4
arch/sparc/boot/btfixupprep.c
View file

@ -216,7 +216,7 @@ int main(int argc,char **argv)
switch (buffer[nbase+3]) {
case 'f':
if (initval) {
fprintf(stderr, "Cannot use pre-initalized fixups for calls\n%s\n", buffer);
fprintf(stderr, "Cannot use pre-initialized fixups for calls\n%s\n", buffer);
exit(1);
}
if (!strcmp (sect, "__ksymtab")) {
@ -273,7 +273,7 @@ int main(int argc,char **argv)
break;
case 'i':
if (initval) {
fprintf(stderr, "Cannot use pre-initalized fixups for INT\n%s\n", buffer);
fprintf(stderr, "Cannot use pre-initialized fixups for INT\n%s\n", buffer);
exit(1);
}
if (strncmp (buffer + mode+9, "HI22 ", 10) && strncmp (buffer + mode+9, "LO10 ", 10)) {

2
arch/x86/kernel/apic/apic.c
View file

@ -459,7 +459,7 @@ static void lapic_timer_broadcast(const struct cpumask *mask)
}
/*
* Setup the local APIC timer for this CPU. Copy the initilized values
* Setup the local APIC timer for this CPU. Copy the initialized values
* of the boot CPU and register the clock event in the framework.
*/
static void __cpuinit setup_APIC_timer(void)

2
arch/x86/kernel/head32.c
View file

@ -20,7 +20,7 @@
static void __init i386_default_early_setup(void)
{
/* Initilize 32bit specific setup functions */
/* Initialize 32bit specific setup functions */
x86_init.resources.probe_roms = probe_roms;
x86_init.resources.reserve_resources = i386_reserve_resources;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;

2
drivers/crypto/amcc/crypto4xx_reg_def.h
View file

@ -113,7 +113,7 @@
#define CRYPTO4XX_PRNG_LFSR_H 0x00070034
/**
* Initilize CRYPTO ENGINE registers, and memory bases.
* Initialize CRYPTO ENGINE registers, and memory bases.
*/
#define PPC4XX_PDR_POLL 0x3ff
#define PPC4XX_OUTPUT_THRESHOLD 2

2
drivers/dma/at_hdmac.c
View file

@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
}
/**
* atc_alloc_descriptor - allocate and return an initilized descriptor
* atc_alloc_descriptor - allocate and return an initialized descriptor
* @chan: the channel to allocate descriptors for
* @gfp_flags: GFP allocation flags
*

2
drivers/gpu/drm/savage/savage_bci.c
View file

@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset)
/*
* Initalize mappings. On Savage4 and SavageIX the alignment
* Initialize mappings. On Savage4 and SavageIX the alignment
* and size of the aperture is not suitable for automatic MTRR setup
* in drm_addmap. Therefore we add them manually before the maps are
* initialized, and tear them down on last close.

2
drivers/ide/ide-gd.c
View file

@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev)
/*
* On HPA drives the capacity needs to be
* reinitilized on resume otherwise the disk
* reinitialized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)

2
drivers/infiniband/hw/ehca/hcp_if.h
View file

@ -49,7 +49,7 @@
#include "hipz_hw.h"
/*
* hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize
* hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize
* resources, create the empty EQPT (ring).
*/
u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,

2
drivers/input/misc/ad714x.c
View file

@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
if (error)
goto err_free_mem;
/* initilize and request sw/hw resources */
/* initialize and request sw/hw resources */
ad714x_hw_init(ad714x);
mutex_init(&ad714x->mutex);

2
drivers/media/video/ov511.c
View file

@ -4808,7 +4808,7 @@ ov7xx0_configure(struct usb_ov511 *ov)
return -1;
if (init_ov_sensor(ov) >= 0) {
PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
PDEBUG(1, "OV7xx0 sensor initialized (method 1)");
} else {
/* Reset the 76xx */
if (i2c_w(ov, 0x12, 0x80) < 0)

2
drivers/media/video/zoran/zoran.h
View file

@ -391,7 +391,7 @@ struct zoran {
struct mutex resource_lock; /* prevent evil stuff */
u8 initialized; /* flag if zoran has been correctly initalized */
u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
struct card_info card;
struct tvnorm *timing;

2
drivers/media/video/zoran/zr36050.c
View file

@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36050 structure with arrays, push the values to
it and initalize from there, as e.g. the linux zr36057/60 driver does it.
it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36050_dqt[0x86] = {

2
drivers/media/video/zoran/zr36060.c
View file

@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36060 structure with arrays, push the values to
it and initalize from there, as e.g. the linux zr36057/60 driver does it.
it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36060_dqt[0x86] = {

4
drivers/message/fusion/mptbase.c
View file

@ -1794,7 +1794,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->sh = NULL;
ioc->cached_fw = NULL;
/* Initilize SCSI Config Data structure
/* Initialize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
@ -2471,7 +2471,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
/*
* Initalize link list for inactive raid volumes.
* Initialize link list for inactive raid volumes.
*/
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);

2
drivers/mtd/nand/denali.c
View file

@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
/* initalize driver data structures */
/* initialize driver data structures */
void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;

4
drivers/net/3c527.c
View file

@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev)
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
* This initalises the on-card and driver datastructures to
* This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
* initalise its house-keeping info. At the same time, we read
* initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.

2
drivers/net/appletalk/ipddp.c
View file

@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void)
if (version_printed++ == 0)
printk(version);
/* Initalize the device structure. */
/* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */

2
drivers/net/hp100.c
View file

@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev)
if (lp->mode == 1)
hp100_init_pdls(dev);
/* Go to performance page and initalize isr and imr registers */
/* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */

2
drivers/net/ibm_newemac/core.c
View file

@ -1044,7 +1044,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
/* Check if we really need to reinitalize RX ring */
/* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}

2
drivers/net/ksz884x.c
View file

@ -6812,7 +6812,7 @@ static int stp;
static int fast_aging;
/**
* netdev_init - initalize network device.
* netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.

2
drivers/net/ll_temac_main.c
View file

@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
return (0);
}
/* Initilize temac */
/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);

20
drivers/net/tulip/dmfe.c
View file

@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev)
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
/* Initilize DM910X board */
/* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev)
}
/* Initilize DM910X board
/* Initialize DM910X board
* Reset DM910X board
* Initilize TX/Rx descriptor chain structure
* Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
/* Initiliaze Transmit/Receive decriptor and CR3/4 */
/* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data)
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
* Re-initilize DM910X board
* Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
netif_carrier_off(dev);
db->wait_reset = 0;
/* Re-initilize DM910X board */
/* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
/*
* Send a setup frame for DM9132
* This setup frame initilize DM910X address filter mode
* This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev)
/*
* Send a setup frame for DM9102/DM9102A
* This setup frame initilize DM910X address filter mode
* This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
/* Re-initilize DM910X board */
/* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
/* Description:
* when user used insmod to add module, system invoked init_module()
* to initilize and register.
* to initialize and register.
*/
static int __init dmfe_init_module(void)

2
drivers/net/wimax/i2400m/control.c
View file

@ -50,7 +50,7 @@
*
* ROADMAP
*
* i2400m_dev_initalize() Called by i2400m_dev_start()
* i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()

4
drivers/parisc/ccio-dma.c
View file

@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = {
};
/**
* ccio_ioc_init - Initalize the I/O Controller
* ccio_ioc_init - Initialize the I/O Controller
* @ioc: The I/O Controller.
*
* Initalize the I/O Controller which includes setting up the
* Initialize the I/O Controller which includes setting up the
* I/O Page Directory, the resource map, and initalizing the
* U2/Uturn chip into virtual mode.
*/

2
drivers/pcmcia/sa11xx_base.c
View file

@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
sinfo->nskt = nr;
/* Initiliaze processor specific parameters */
/* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];

2
drivers/scsi/advansys.c
View file

@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
asc_dvc->bug_fix_cntl = 0;
asc_dvc->pci_fix_asyn_xfer = 0;
asc_dvc->pci_fix_asyn_xfer_always = 0;
/* asc_dvc->init_state initalized in AscInitGetConfig(). */
/* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
asc_dvc->is_in_int = 0;

4
drivers/scsi/aic94xx/aic94xx_seq.c
View file

@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
* Setup and initialize Central sequencers. Initialiaze the mode
* Setup and initialize Central sequencers. Initialize the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
* (ENABLE SPINUP) primitive. Must be initilized to val - 1.
* (ENABLE SPINUP) primitive. Must be initialized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);

2
drivers/scsi/bfa/vport.c
View file

@ -789,7 +789,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
switch (status) {
case BFA_STATUS_OK:
/*
* Initialiaze the V-Port fields
* Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;

2
drivers/scsi/pm8001/pm8001_hwi.c
View file

@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
}
/**
* pm8001_chip_iounmap - which maped when initilized.
* pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)

2
drivers/scsi/qla4xxx/ql4_init.c
View file

@ -183,7 +183,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha)
**/
static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
{
/* Initilize aen queue */
/* Initialize aen queue */
ha->aen_q_count = MAX_AEN_ENTRIES;
return qla4xxx_get_firmware_status(ha);

6
drivers/serial/sn_console.c
View file

@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
/* The serial_core stuffs are initilized, use them */
/* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
/* We're initilized, using serial core infrastructure */
/* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
* initilized yet. Just return. Writes are going through
* initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;

2
drivers/staging/comedi/drivers/usbdux.c
View file

@ -2087,7 +2087,7 @@ static int usbdux_pwm_start(struct comedi_device *dev,
if (ret < 0)
return ret;
/* initalise the buffer */
/* initialise the buffer */
for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;

6
drivers/staging/octeon/cvmx-cmd-queue.c
View file

@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
if (qstate->base_ptr_div128) {
if (max_depth != (int)qstate->max_depth) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
"Queue already initalized with different "
"Queue already initialized with different "
"max_depth (%d).\n",
(int)qstate->max_depth);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if (fpa_pool != qstate->fpa_pool) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
"Queue already initalized with different "
"Queue already initialized with different "
"FPA pool (%u).\n",
qstate->fpa_pool);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
"Queue already initalized with different "
"Queue already initialized with different "
"FPA pool size (%u).\n",
(qstate->pool_size_m1 + 1) << 3);
return CVMX_CMD_QUEUE_INVALID_PARAM;

2
drivers/staging/pohmelfs/inode.c
View file

@ -848,7 +848,7 @@ static void pohmelfs_destroy_inode(struct inode *inode)
}
/*
* ->alloc_inode() callback. Allocates inode and initilizes private data.
* ->alloc_inode() callback. Allocates inode and initializes private data.
*/
static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
{

4
drivers/staging/rt2860/common/cmm_wpa.c
View file

@ -427,7 +427,7 @@ void RTMPToWirelessSta(struct rt_rtmp_adapter *pAd,
/*
==========================================================================
Description:
This is a function to initilize 4-way handshake
This is a function to initialize 4-way handshake
Return:
@ -867,7 +867,7 @@ void PeerPairMsg3Action(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
When receiving the last packet of 4-way pairwisekey handshake.
Initilize 2-way groupkey handshake following.
Initialize 2-way groupkey handshake following.
Return:
==========================================================================
*/

6
drivers/staging/rtl8192e/r8190_rtl8256.c
View file

@ -501,13 +501,13 @@ SetRFPowerState8190(
if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
bool rtstatus = true;
u32 InitilizeCount = 3;
u32 InitializeCount = 3;
do
{
InitilizeCount--;
InitializeCount--;
priv->RegRfOff = false;
rtstatus = NicIFEnableNIC(dev);
}while( (rtstatus != true) &&(InitilizeCount >0) );
}while( (rtstatus != true) &&(InitializeCount >0) );
if(rtstatus != true)
{

2
drivers/usb/serial/kl5kusb105.c
View file

@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial)
spin_lock_init(&priv->lock);
/* priv->termios is left uninitalized until port opening */
/* priv->termios is left uninitialized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}

2
drivers/usb/wusbcore/wusbhc.c
View file

@ -26,7 +26,7 @@
* the one that requires (phase B, wusbhc_b_{create,destroy}).
*
* This is so because usb_add_hcd() will start the HC, and thus, all
* the HC specific stuff has to be already initialiazed (like sysfs
* the HC specific stuff has to be already initialized (like sysfs
* thingies).
*/
#include <linux/device.h>

2
drivers/uwb/wlp/wss-lc.c
View file

@ -180,7 +180,7 @@ int wlp_wss_sysfs_add(struct wlp_wss *wss, char *wssid_str)
* If memory was allocated for the kobject's name then it will
* be freed by the kobject system during this time.
*
* The EDA cache is removed and reinitilized when the WSS is removed. We
* The EDA cache is removed and reinitialized when the WSS is removed. We
* thus loose knowledge of members of this WSS at that time and need not do
* it here.
*/

2
drivers/video/carminefb.c
View file

@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw)
u32 loops;
u32 ret;
/* Initalize Carmine */
/* Initialize Carmine */
/* Sets internal clock */
c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
CARMINE_DFLT_IP_CLOCK_ENABLE);

2
drivers/video/tgafb.c
View file

@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info)
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
/* Initalise RAMDAC. */
/* Initialise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) {
/* Init BT485 RAMDAC registers. */

2
fs/befs/linuxvfs.c
View file

@ -436,7 +436,7 @@ befs_init_inodecache(void)
init_once);
if (befs_inode_cachep == NULL) {
printk(KERN_ERR "befs_init_inodecache: "
"Couldn't initalize inode slabcache\n");
"Couldn't initialize inode slabcache\n");
return -ENOMEM;
}

2
fs/ecryptfs/crypto.c
View file

@ -762,7 +762,7 @@ ecryptfs_decrypt_page_offset(struct ecryptfs_crypt_stat *crypt_stat,
/**
* ecryptfs_init_crypt_ctx
* @crypt_stat: Uninitilized crypt stats structure
* @crypt_stat: Uninitialized crypt stats structure
*
* Initialize the crypto context.
*

2
fs/ext4/extents.c
View file

@ -2918,7 +2918,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
* One of more index blocks maybe needed if the extent tree grow after
* the unintialized extent split. To prevent ENOSPC occur at the IO
* complete, we need to split the uninitialized extent before DIO submit
* the IO. The uninitilized extent called at this time will be split
* the IO. The uninitialized extent called at this time will be split
* into three uninitialized extent(at most). After IO complete, the part
* being filled will be convert to initialized by the end_io callback function
* via ext4_convert_unwritten_extents().

2
fs/ext4/super.c
View file

@ -3008,7 +3008,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
ext4_ext_init(sb);
err = ext4_mb_init(sb, needs_recovery);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)",
ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
goto failed_mount4;
}

2
fs/freevxfs/vxfs_super.c
View file

@ -135,7 +135,7 @@ static int vxfs_remount(struct super_block *sb, int *flags, char *data)
}
/**
* vxfs_read_super - read superblock into memory and initalize filesystem
* vxfs_read_super - read superblock into memory and initialize filesystem
* @sbp: VFS superblock (to fill)
* @dp: fs private mount data
* @silent: do not complain loudly when sth is wrong

2
fs/ocfs2/super.c
View file

@ -2476,7 +2476,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb)
kfree(osb->slot_recovery_generations);
/* FIXME
* This belongs in journal shutdown, but because we have to
* allocate osb->journal at the start of ocfs2_initalize_osb(),
* allocate osb->journal at the start of ocfs2_initialize_osb(),
* we free it here.
*/
kfree(osb->journal);

2
fs/reiserfs/inode.c
View file

@ -1221,7 +1221,7 @@ static void init_inode(struct inode *inode, struct treepath *path)
inode_set_bytes(inode,
to_real_used_space(inode, inode->i_blocks,
SD_V2_SIZE));
/* read persistent inode attributes from sd and initalise
/* read persistent inode attributes from sd and initialise
generic inode flags from them */
REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd);
sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode);

2
lib/random32.c
View file

@ -131,7 +131,7 @@ core_initcall(random32_init);
/*
* Generate better values after random number generator
* is fully initalized.
* is fully initialized.
*/
static int __init random32_reseed(void)
{

2
net/netfilter/ipvs/ip_vs_lblc.c
View file

@ -11,7 +11,7 @@
* Changes:
* Martin Hamilton : fixed the terrible locking bugs
* *lock(tbl->lock) ==> *lock(&tbl->lock)
* Wensong Zhang : fixed the uninitilized tbl->lock bug
* Wensong Zhang : fixed the uninitialized tbl->lock bug
* Wensong Zhang : added doing full expiration check to
* collect stale entries of 24+ hours when
* no partial expire check in a half hour

2
net/netfilter/ipvs/ip_vs_lblcr.c
View file

@ -386,7 +386,7 @@ ip_vs_lblcr_new(struct ip_vs_lblcr_table *tbl, const union nf_inet_addr *daddr,
ip_vs_addr_copy(dest->af, &en->addr, daddr);
en->lastuse = jiffies;
/* initilize its dest set */
/* initialize its dest set */
atomic_set(&(en->set.size), 0);
INIT_LIST_HEAD(&en->set.list);
rwlock_init(&en->set.lock);

2
net/sctp/associola.c
View file

@ -172,7 +172,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
(unsigned long)sp->autoclose * HZ;
/* Initilizes the timers */
/* Initializes the timers */
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
setup_timer(&asoc->timers[i], sctp_timer_events[i],
(unsigned long)asoc);

2
net/sctp/protocol.c
View file

@ -1162,7 +1162,7 @@ SCTP_STATIC __init int sctp_init(void)
/* Set the pressure threshold to be a fraction of global memory that
* is up to 1/2 at 256 MB, decreasing toward zero with the amount of
* memory, with a floor of 128 pages.
* Note this initalizes the data in sctpv6_prot too
* Note this initializes the data in sctpv6_prot too
* Unabashedly stolen from tcp_init
*/
nr_pages = totalram_pages - totalhigh_pages;

2
security/smack/smack_lsm.c
View file

@ -3227,7 +3227,7 @@ static __init int smack_init(void)
cred = (struct cred *) current->cred;
cred->security = &smack_known_floor.smk_known;
/* initilize the smack_know_list */
/* initialize the smack_know_list */
init_smack_know_list();
/*
* Initialize locks

2
sound/pci/trident/trident_main.c
View file

@ -1055,7 +1055,7 @@ static int snd_trident_capture_prepare(struct snd_pcm_substream *substream)
spin_lock_irq(&trident->reg_lock);
// Initilize the channel and set channel Mode
// Initialize the channel and set channel Mode
outb(0, TRID_REG(trident, LEGACY_DMAR15));
// Set DMA channel operation mode register

2
sound/soc/fsl/mpc8610_hpcd.c
View file

@ -46,7 +46,7 @@ struct mpc8610_hpcd_data {
};
/**
* mpc8610_hpcd_machine_probe: initalize the board
* mpc8610_hpcd_machine_probe: initialize the board
*
* This function is called when platform_device_add() is called. It is used
* to initialize the board-specific hardware.

2
sound/soc/soc-core.c
View file

@ -1307,7 +1307,7 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card)
}
/*
* Attempt to initialise any uninitalised cards. Must be called with
* Attempt to initialise any uninitialised cards. Must be called with
* client_mutex.
*/
static void snd_soc_instantiate_cards(void)