From 662c738d9946de521dcece2b146dced335242389 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Wed, 29 Feb 2012 23:03:11 +0100 Subject: [PATCH 1/7] usb: otg: gpio_vbus: Add otg transceiver events and notifiers Commit 9ad63986c606 (pda_power: Add support for using otg transceiver events) converted the pda-power driver to use otg events to determine the status of the power supply. As gpio-vbus didn't use otg events until now, this change breaks setups of pda-power with a gpio-vbus transceiver. This patch adds the necessary otg events and notifiers to gpio-vbus. Signed-off-by: Heiko Stuebner Reviewed-by: Dima Zavin Signed-off-by: Felipe Balbi --- drivers/usb/otg/gpio_vbus.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index 3ece43a2e4c1..a0a2178974fe 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work) struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work); struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio; + int gpio, status; if (!gpio_vbus->phy.otg->gadget) return; @@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work) */ gpio = pdata->gpio_pullup; if (is_vbus_powered(pdata)) { + status = USB_EVENT_VBUS; gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ @@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work) /* optionally enable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) @@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } } @@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) irq, err); goto err_irq; } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + INIT_WORK(&gpio_vbus->work, gpio_vbus_work); gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); From c85dcdac5852295cf6822f5c4331a6ddab72581f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 11 Apr 2012 16:09:10 -0400 Subject: [PATCH 2/7] USB: gadget: storage gadgets send wrong error code for unknown commands This patch (as1539) fixes a minor bug in the mass-storage gadget drivers. When an unknown command is received, the error code sent back is "Invalid Field in CDB" rather than "Invalid Command". This is because the bitmask of CDB bytes allowed to be nonzero is incorrect. When handling an unknown command, we don't care which command bytes are nonzero. All the bits in the mask should be set, not just eight of them. Signed-off-by: Alan Stern CC: CC: Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- drivers/usb/gadget/file_storage.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e966425f..cb8c162cae5a 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2189,7 +2189,7 @@ static int do_scsi_command(struct fsg_common *common) common->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", common->cmnd[0]); reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown); + DATA_DIR_UNKNOWN, ~0, 0, unknown); if (reply == 0) { common->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4fac56927741..a896d73f7a93 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg) fsg->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { fsg->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; } From fc87e080e19fdeb1120ce274423fea7b2ec2f63e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:49:20 +0300 Subject: [PATCH 3/7] usb: musb: drop __deprecated flag Looks like we cannot live without that double_buffer_not_ok flag due to many HW bugs this MUSB core has. So, let's drop the __deprecated flag to avoid annoying compile warnings. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 93de517a32a0..f4a40f001c88 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -449,7 +449,7 @@ struct musb { * We added this flag to forcefully disable double * buffering until we get it working. */ - unsigned double_buffer_not_ok:1 __deprecated; + unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; From c67dd31c5cc745e72d033c0e7d4a2da67c90cd88 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 17:03:10 +0200 Subject: [PATCH 4/7] usb: musb: davinci.c: add missing unregister usb_nop_xceiv_unregister is needed on failure of usb_get_transceiver, as done in other error-handling code in the same function. Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi --- drivers/usb/musb/davinci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 97ab975fa442..768b4b55c816 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_transceiver(); if (!musb->xceiv) - return -ENODEV; + goto unregister; musb->mregs += DAVINCI_BASE_OFFSET; @@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb) fail: usb_put_transceiver(musb->xceiv); +unregister: usb_nop_xceiv_unregister(); return -ENODEV; } From 15b120d67019d691e4389372967332d74a80522a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:59:30 +0300 Subject: [PATCH 5/7] usb: gadget: dummy: do not call pullup() on udc_stop() pullup() is already called properly by udc-core.c and there's no need to call it from udc_stop(), in fact that will cause issues. Cc: stable@vger.kernel.org Reviewed-by: Alexander Shishkin Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd2164166..170cbe89d9f8 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dum->driver = NULL; - dummy_pullup(&dum->gadget, 0); return 0; } From 83a787a71e034244a9fd1d5988fe18f226341417 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 27 Apr 2012 11:02:15 +0300 Subject: [PATCH 6/7] usb: gadget: udc-core: fix wrong call order commit 6d258a4 (usb: gadget: udc-core: stop UDC on device-initiated disconnect) introduced another case of asymmetric calls when issuing a device-initiated disconnect. Fix it. Reported-by: Ben Hutchings Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 2fa9865babed..df1bd87232dd 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev, usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + usb_gadget_disconnect(udc->gadget); if (udc_is_newstyle(udc)) usb_gadget_udc_stop(udc->gadget, udc->driver); - usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; From 320cd1e750f1bf3e47eb41209dcb2be07264cb76 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 26 Apr 2012 11:31:57 -0400 Subject: [PATCH 7/7] usb: gadget: udc-core: fix incompatibility with dummy-hcd This patch (as1548) fixes a recently-introduced incompatibility between the UDC core and the dummy-hcd driver. Commit 8ae8090c82eb407267001f75b3d256b3bd4ae691 (usb: gadget: udc-core: fix asymmetric calls in remove_driver) moved the usb_gadget_udc_stop() call in usb_gadget_remove_driver() below the usb_gadget_disconnect() call. As a result, usb_gadget_disconnect() gets called at a time when the gadget driver believes it has been unbound but dummy-hcd believes it has not. A nasty error ensues when dummy-hcd calls the gadget driver's disconnect method a second time. To fix the problem, this patch moves the gadget driver's unbind notification after the usb_gadget_disconnect() call. Now nothing happens between the two unbind notifications, so nothing goes wrong. Signed-off-by: Alan Stern Tested-by: Alexander Shishkin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index df1bd87232dd..e5e44f8cde9a 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver);