add driver for enc28j60 ethernet chip
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Claudio Lanconelli
David S. Miller
parent
a24a789cc6
commit
3ec9c11da0
4 changed files with 1928 additions and 0 deletions
|
|
@ -912,6 +912,24 @@ config DM9000
|
|||
To compile this driver as a module, choose M here. The module
|
||||
will be called dm9000.
|
||||
|
||||
config ENC28J60
|
||||
tristate "ENC28J60 support"
|
||||
depends on EXPERIMENTAL && SPI && NET_ETHERNET
|
||||
select CRC32
|
||||
---help---
|
||||
Support for the Microchip EN28J60 ethernet chip.
|
||||
|
||||
To compile this driver as a module, choose M here and read
|
||||
<file:Documentation/networking/net-modules.txt>. The module will be
|
||||
called enc28j60.
|
||||
|
||||
config ENC28J60_WRITEVERIFY
|
||||
bool "Enable write verify"
|
||||
depends on ENC28J60
|
||||
---help---
|
||||
Enable the verify after the buffer write useful for debugging purpose.
|
||||
If unsure, say N.
|
||||
|
||||
config SMC911X
|
||||
tristate "SMSC LAN911[5678] support"
|
||||
select CRC32
|
||||
|
|
|
|||
|
|
@ -218,6 +218,7 @@ obj-$(CONFIG_DM9000) += dm9000.o
|
|||
obj-$(CONFIG_FEC_8XX) += fec_8xx/
|
||||
obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
|
||||
obj-$(CONFIG_MLX4_CORE) += mlx4/
|
||||
obj-$(CONFIG_ENC28J60) += enc28j60.o
|
||||
|
||||
obj-$(CONFIG_MACB) += macb.o
|
||||
|
||||
|
|
|
|||
1600
drivers/net/enc28j60.c
Normal file
1600
drivers/net/enc28j60.c
Normal file
File diff suppressed because it is too large
Load diff
309
drivers/net/enc28j60_hw.h
Normal file
309
drivers/net/enc28j60_hw.h
Normal file
|
|
@ -0,0 +1,309 @@
|
|||
/*
|
||||
* enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers
|
||||
*
|
||||
* $Id: enc28j60_hw.h,v 1.9 2007/12/14 11:59:16 claudio Exp $
|
||||
*/
|
||||
|
||||
#ifndef _ENC28J60_HW_H
|
||||
#define _ENC28J60_HW_H
|
||||
|
||||
/*
|
||||
* ENC28J60 Control Registers
|
||||
* Control register definitions are a combination of address,
|
||||
* bank number, and Ethernet/MAC/PHY indicator bits.
|
||||
* - Register address (bits 0-4)
|
||||
* - Bank number (bits 5-6)
|
||||
* - MAC/MII indicator (bit 7)
|
||||
*/
|
||||
#define ADDR_MASK 0x1F
|
||||
#define BANK_MASK 0x60
|
||||
#define SPRD_MASK 0x80
|
||||
/* All-bank registers */
|
||||
#define EIE 0x1B
|
||||
#define EIR 0x1C
|
||||
#define ESTAT 0x1D
|
||||
#define ECON2 0x1E
|
||||
#define ECON1 0x1F
|
||||
/* Bank 0 registers */
|
||||
#define ERDPTL (0x00|0x00)
|
||||
#define ERDPTH (0x01|0x00)
|
||||
#define EWRPTL (0x02|0x00)
|
||||
#define EWRPTH (0x03|0x00)
|
||||
#define ETXSTL (0x04|0x00)
|
||||
#define ETXSTH (0x05|0x00)
|
||||
#define ETXNDL (0x06|0x00)
|
||||
#define ETXNDH (0x07|0x00)
|
||||
#define ERXSTL (0x08|0x00)
|
||||
#define ERXSTH (0x09|0x00)
|
||||
#define ERXNDL (0x0A|0x00)
|
||||
#define ERXNDH (0x0B|0x00)
|
||||
#define ERXRDPTL (0x0C|0x00)
|
||||
#define ERXRDPTH (0x0D|0x00)
|
||||
#define ERXWRPTL (0x0E|0x00)
|
||||
#define ERXWRPTH (0x0F|0x00)
|
||||
#define EDMASTL (0x10|0x00)
|
||||
#define EDMASTH (0x11|0x00)
|
||||
#define EDMANDL (0x12|0x00)
|
||||
#define EDMANDH (0x13|0x00)
|
||||
#define EDMADSTL (0x14|0x00)
|
||||
#define EDMADSTH (0x15|0x00)
|
||||
#define EDMACSL (0x16|0x00)
|
||||
#define EDMACSH (0x17|0x00)
|
||||
/* Bank 1 registers */
|
||||
#define EHT0 (0x00|0x20)
|
||||
#define EHT1 (0x01|0x20)
|
||||
#define EHT2 (0x02|0x20)
|
||||
#define EHT3 (0x03|0x20)
|
||||
#define EHT4 (0x04|0x20)
|
||||
#define EHT5 (0x05|0x20)
|
||||
#define EHT6 (0x06|0x20)
|
||||
#define EHT7 (0x07|0x20)
|
||||
#define EPMM0 (0x08|0x20)
|
||||
#define EPMM1 (0x09|0x20)
|
||||
#define EPMM2 (0x0A|0x20)
|
||||
#define EPMM3 (0x0B|0x20)
|
||||
#define EPMM4 (0x0C|0x20)
|
||||
#define EPMM5 (0x0D|0x20)
|
||||
#define EPMM6 (0x0E|0x20)
|
||||
#define EPMM7 (0x0F|0x20)
|
||||
#define EPMCSL (0x10|0x20)
|
||||
#define EPMCSH (0x11|0x20)
|
||||
#define EPMOL (0x14|0x20)
|
||||
#define EPMOH (0x15|0x20)
|
||||
#define EWOLIE (0x16|0x20)
|
||||
#define EWOLIR (0x17|0x20)
|
||||
#define ERXFCON (0x18|0x20)
|
||||
#define EPKTCNT (0x19|0x20)
|
||||
/* Bank 2 registers */
|
||||
#define MACON1 (0x00|0x40|SPRD_MASK)
|
||||
/* #define MACON2 (0x01|0x40|SPRD_MASK) */
|
||||
#define MACON3 (0x02|0x40|SPRD_MASK)
|
||||
#define MACON4 (0x03|0x40|SPRD_MASK)
|
||||
#define MABBIPG (0x04|0x40|SPRD_MASK)
|
||||
#define MAIPGL (0x06|0x40|SPRD_MASK)
|
||||
#define MAIPGH (0x07|0x40|SPRD_MASK)
|
||||
#define MACLCON1 (0x08|0x40|SPRD_MASK)
|
||||
#define MACLCON2 (0x09|0x40|SPRD_MASK)
|
||||
#define MAMXFLL (0x0A|0x40|SPRD_MASK)
|
||||
#define MAMXFLH (0x0B|0x40|SPRD_MASK)
|
||||
#define MAPHSUP (0x0D|0x40|SPRD_MASK)
|
||||
#define MICON (0x11|0x40|SPRD_MASK)
|
||||
#define MICMD (0x12|0x40|SPRD_MASK)
|
||||
#define MIREGADR (0x14|0x40|SPRD_MASK)
|
||||
#define MIWRL (0x16|0x40|SPRD_MASK)
|
||||
#define MIWRH (0x17|0x40|SPRD_MASK)
|
||||
#define MIRDL (0x18|0x40|SPRD_MASK)
|
||||
#define MIRDH (0x19|0x40|SPRD_MASK)
|
||||
/* Bank 3 registers */
|
||||
#define MAADR1 (0x00|0x60|SPRD_MASK)
|
||||
#define MAADR0 (0x01|0x60|SPRD_MASK)
|
||||
#define MAADR3 (0x02|0x60|SPRD_MASK)
|
||||
#define MAADR2 (0x03|0x60|SPRD_MASK)
|
||||
#define MAADR5 (0x04|0x60|SPRD_MASK)
|
||||
#define MAADR4 (0x05|0x60|SPRD_MASK)
|
||||
#define EBSTSD (0x06|0x60)
|
||||
#define EBSTCON (0x07|0x60)
|
||||
#define EBSTCSL (0x08|0x60)
|
||||
#define EBSTCSH (0x09|0x60)
|
||||
#define MISTAT (0x0A|0x60|SPRD_MASK)
|
||||
#define EREVID (0x12|0x60)
|
||||
#define ECOCON (0x15|0x60)
|
||||
#define EFLOCON (0x17|0x60)
|
||||
#define EPAUSL (0x18|0x60)
|
||||
#define EPAUSH (0x19|0x60)
|
||||
/* PHY registers */
|
||||
#define PHCON1 0x00
|
||||
#define PHSTAT1 0x01
|
||||
#define PHHID1 0x02
|
||||
#define PHHID2 0x03
|
||||
#define PHCON2 0x10
|
||||
#define PHSTAT2 0x11
|
||||
#define PHIE 0x12
|
||||
#define PHIR 0x13
|
||||
#define PHLCON 0x14
|
||||
|
||||
/* ENC28J60 EIE Register Bit Definitions */
|
||||
#define EIE_INTIE 0x80
|
||||
#define EIE_PKTIE 0x40
|
||||
#define EIE_DMAIE 0x20
|
||||
#define EIE_LINKIE 0x10
|
||||
#define EIE_TXIE 0x08
|
||||
/* #define EIE_WOLIE 0x04 (reserved) */
|
||||
#define EIE_TXERIE 0x02
|
||||
#define EIE_RXERIE 0x01
|
||||
/* ENC28J60 EIR Register Bit Definitions */
|
||||
#define EIR_PKTIF 0x40
|
||||
#define EIR_DMAIF 0x20
|
||||
#define EIR_LINKIF 0x10
|
||||
#define EIR_TXIF 0x08
|
||||
/* #define EIR_WOLIF 0x04 (reserved) */
|
||||
#define EIR_TXERIF 0x02
|
||||
#define EIR_RXERIF 0x01
|
||||
/* ENC28J60 ESTAT Register Bit Definitions */
|
||||
#define ESTAT_INT 0x80
|
||||
#define ESTAT_LATECOL 0x10
|
||||
#define ESTAT_RXBUSY 0x04
|
||||
#define ESTAT_TXABRT 0x02
|
||||
#define ESTAT_CLKRDY 0x01
|
||||
/* ENC28J60 ECON2 Register Bit Definitions */
|
||||
#define ECON2_AUTOINC 0x80
|
||||
#define ECON2_PKTDEC 0x40
|
||||
#define ECON2_PWRSV 0x20
|
||||
#define ECON2_VRPS 0x08
|
||||
/* ENC28J60 ECON1 Register Bit Definitions */
|
||||
#define ECON1_TXRST 0x80
|
||||
#define ECON1_RXRST 0x40
|
||||
#define ECON1_DMAST 0x20
|
||||
#define ECON1_CSUMEN 0x10
|
||||
#define ECON1_TXRTS 0x08
|
||||
#define ECON1_RXEN 0x04
|
||||
#define ECON1_BSEL1 0x02
|
||||
#define ECON1_BSEL0 0x01
|
||||
/* ENC28J60 MACON1 Register Bit Definitions */
|
||||
#define MACON1_LOOPBK 0x10
|
||||
#define MACON1_TXPAUS 0x08
|
||||
#define MACON1_RXPAUS 0x04
|
||||
#define MACON1_PASSALL 0x02
|
||||
#define MACON1_MARXEN 0x01
|
||||
/* ENC28J60 MACON2 Register Bit Definitions */
|
||||
#define MACON2_MARST 0x80
|
||||
#define MACON2_RNDRST 0x40
|
||||
#define MACON2_MARXRST 0x08
|
||||
#define MACON2_RFUNRST 0x04
|
||||
#define MACON2_MATXRST 0x02
|
||||
#define MACON2_TFUNRST 0x01
|
||||
/* ENC28J60 MACON3 Register Bit Definitions */
|
||||
#define MACON3_PADCFG2 0x80
|
||||
#define MACON3_PADCFG1 0x40
|
||||
#define MACON3_PADCFG0 0x20
|
||||
#define MACON3_TXCRCEN 0x10
|
||||
#define MACON3_PHDRLEN 0x08
|
||||
#define MACON3_HFRMLEN 0x04
|
||||
#define MACON3_FRMLNEN 0x02
|
||||
#define MACON3_FULDPX 0x01
|
||||
/* ENC28J60 MICMD Register Bit Definitions */
|
||||
#define MICMD_MIISCAN 0x02
|
||||
#define MICMD_MIIRD 0x01
|
||||
/* ENC28J60 MISTAT Register Bit Definitions */
|
||||
#define MISTAT_NVALID 0x04
|
||||
#define MISTAT_SCAN 0x02
|
||||
#define MISTAT_BUSY 0x01
|
||||
/* ENC28J60 ERXFCON Register Bit Definitions */
|
||||
#define ERXFCON_UCEN 0x80
|
||||
#define ERXFCON_ANDOR 0x40
|
||||
#define ERXFCON_CRCEN 0x20
|
||||
#define ERXFCON_PMEN 0x10
|
||||
#define ERXFCON_MPEN 0x08
|
||||
#define ERXFCON_HTEN 0x04
|
||||
#define ERXFCON_MCEN 0x02
|
||||
#define ERXFCON_BCEN 0x01
|
||||
|
||||
/* ENC28J60 PHY PHCON1 Register Bit Definitions */
|
||||
#define PHCON1_PRST 0x8000
|
||||
#define PHCON1_PLOOPBK 0x4000
|
||||
#define PHCON1_PPWRSV 0x0800
|
||||
#define PHCON1_PDPXMD 0x0100
|
||||
/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */
|
||||
#define PHSTAT1_PFDPX 0x1000
|
||||
#define PHSTAT1_PHDPX 0x0800
|
||||
#define PHSTAT1_LLSTAT 0x0004
|
||||
#define PHSTAT1_JBSTAT 0x0002
|
||||
/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
|
||||
#define PHSTAT2_TXSTAT (1 << 13)
|
||||
#define PHSTAT2_RXSTAT (1 << 12)
|
||||
#define PHSTAT2_COLSTAT (1 << 11)
|
||||
#define PHSTAT2_LSTAT (1 << 10)
|
||||
#define PHSTAT2_DPXSTAT (1 << 9)
|
||||
#define PHSTAT2_PLRITY (1 << 5)
|
||||
/* ENC28J60 PHY PHCON2 Register Bit Definitions */
|
||||
#define PHCON2_FRCLINK 0x4000
|
||||
#define PHCON2_TXDIS 0x2000
|
||||
#define PHCON2_JABBER 0x0400
|
||||
#define PHCON2_HDLDIS 0x0100
|
||||
/* ENC28J60 PHY PHIE Register Bit Definitions */
|
||||
#define PHIE_PLNKIE (1 << 4)
|
||||
#define PHIE_PGEIE (1 << 1)
|
||||
/* ENC28J60 PHY PHIR Register Bit Definitions */
|
||||
#define PHIR_PLNKIF (1 << 4)
|
||||
#define PHIR_PGEIF (1 << 1)
|
||||
|
||||
/* ENC28J60 Packet Control Byte Bit Definitions */
|
||||
#define PKTCTRL_PHUGEEN 0x08
|
||||
#define PKTCTRL_PPADEN 0x04
|
||||
#define PKTCTRL_PCRCEN 0x02
|
||||
#define PKTCTRL_POVERRIDE 0x01
|
||||
|
||||
/* ENC28J60 Transmit Status Vector */
|
||||
#define TSV_TXBYTECNT 0
|
||||
#define TSV_TXCOLLISIONCNT 16
|
||||
#define TSV_TXCRCERROR 20
|
||||
#define TSV_TXLENCHKERROR 21
|
||||
#define TSV_TXLENOUTOFRANGE 22
|
||||
#define TSV_TXDONE 23
|
||||
#define TSV_TXMULTICAST 24
|
||||
#define TSV_TXBROADCAST 25
|
||||
#define TSV_TXPACKETDEFER 26
|
||||
#define TSV_TXEXDEFER 27
|
||||
#define TSV_TXEXCOLLISION 28
|
||||
#define TSV_TXLATECOLLISION 29
|
||||
#define TSV_TXGIANT 30
|
||||
#define TSV_TXUNDERRUN 31
|
||||
#define TSV_TOTBYTETXONWIRE 32
|
||||
#define TSV_TXCONTROLFRAME 48
|
||||
#define TSV_TXPAUSEFRAME 49
|
||||
#define TSV_BACKPRESSUREAPP 50
|
||||
#define TSV_TXVLANTAGFRAME 51
|
||||
|
||||
#define TSV_SIZE 7
|
||||
#define TSV_BYTEOF(x) ((x) / 8)
|
||||
#define TSV_BITMASK(x) (1 << ((x) % 8))
|
||||
#define TSV_GETBIT(x, y) (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0)
|
||||
|
||||
/* ENC28J60 Receive Status Vector */
|
||||
#define RSV_RXLONGEVDROPEV 16
|
||||
#define RSV_CARRIEREV 18
|
||||
#define RSV_CRCERROR 20
|
||||
#define RSV_LENCHECKERR 21
|
||||
#define RSV_LENOUTOFRANGE 22
|
||||
#define RSV_RXOK 23
|
||||
#define RSV_RXMULTICAST 24
|
||||
#define RSV_RXBROADCAST 25
|
||||
#define RSV_DRIBBLENIBBLE 26
|
||||
#define RSV_RXCONTROLFRAME 27
|
||||
#define RSV_RXPAUSEFRAME 28
|
||||
#define RSV_RXUNKNOWNOPCODE 29
|
||||
#define RSV_RXTYPEVLAN 30
|
||||
|
||||
#define RSV_SIZE 6
|
||||
#define RSV_BITMASK(x) (1 << ((x) - 16))
|
||||
#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
|
||||
|
||||
|
||||
/* SPI operation codes */
|
||||
#define ENC28J60_READ_CTRL_REG 0x00
|
||||
#define ENC28J60_READ_BUF_MEM 0x3A
|
||||
#define ENC28J60_WRITE_CTRL_REG 0x40
|
||||
#define ENC28J60_WRITE_BUF_MEM 0x7A
|
||||
#define ENC28J60_BIT_FIELD_SET 0x80
|
||||
#define ENC28J60_BIT_FIELD_CLR 0xA0
|
||||
#define ENC28J60_SOFT_RESET 0xFF
|
||||
|
||||
|
||||
/* buffer boundaries applied to internal 8K ram
|
||||
* entire available packet buffer space is allocated.
|
||||
* Give TX buffer space for one full ethernet frame (~1500 bytes)
|
||||
* receive buffer gets the rest */
|
||||
#define TXSTART_INIT 0x1A00
|
||||
#define TXEND_INIT 0x1FFF
|
||||
|
||||
/* Put RX buffer at 0 as suggested by the Errata datasheet */
|
||||
#define RXSTART_INIT 0x0000
|
||||
#define RXEND_INIT 0x19FF
|
||||
|
||||
/* maximum ethernet frame length */
|
||||
#define MAX_FRAMELEN 1518
|
||||
|
||||
/* Prefered half duplex: LEDA: Link status LEDB: Rx/Tx activity */
|
||||
#define ENC28J60_LAMPS_MODE 0x3476
|
||||
|
||||
#endif
|
||||
Loading…
Reference in a new issue