From 3bfdebbaebed8238ac7fb7934791b0231e0f1e65 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 10:32:20 +0100 Subject: [PATCH] ARM: ux500: move UART pin control to the device tree This moves the static, device-tied pin control configuration out of the board file board-mop500-pins.c and into the device tree. We create a new .dtsi-file to be shared between all the MOP500-related boards, that include all HREF variants and the Snowball board. Assign pin states for HREF and Snowball boards alike. Cc: Lee Jones Cc: Patrice Chotard Signed-off-by: Linus Walleij --- .../arm/boot/dts/ste-href-family-pinctrl.dtsi | 114 ++++++++++++++++++ arch/arm/boot/dts/ste-href.dtsi | 10 ++ arch/arm/boot/dts/ste-snowball.dts | 10 ++ arch/arm/mach-ux500/board-mop500-pins.c | 52 -------- 4 files changed, 134 insertions(+), 52 deletions(-) create mode 100644 arch/arm/boot/dts/ste-href-family-pinctrl.dtsi diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi new file mode 100644 index 000000000000..d979de27b6e1 --- /dev/null +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -0,0 +1,114 @@ +/* + * Copyright 2013 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "ste-nomadik-pinctrl.dtsi" + +/ { + soc { + pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + uart0_default_mode: uart0_default { + default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + + sleep_cfg3 { + ste,pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + uart1_default_mode: uart1_default { + default_mux { + ste,function = "u1"; + ste,pins = "u1rxtx_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart1_sleep_mode: uart1_sleep { + sleep_cfg1 { + ste,pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + ste,function = "u2"; + ste,pins = "u2rxtx_c_1"; + }; + default_cfg1 { + ste,pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + ste,pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index aa3f02060fdd..914a5f4399e5 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -11,6 +11,7 @@ #include #include "ste-dbx5x0.dtsi" +#include "ste-href-family-pinctrl.dtsi" / { memory { @@ -30,14 +31,23 @@ soc { uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; status = "okay"; }; uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_default_mode>; + pinctrl-1 = <&uart1_sleep_mode>; status = "okay"; }; uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index f0b39f835914..16d28863ef6e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "ste-dbx5x0.dtsi" +#include "ste-href-family-pinctrl.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -155,14 +156,23 @@ }; uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; status = "okay"; }; uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_default_mode>; + pinctrl-1 = <&uart1_sleep_mode>; status = "okay"; }; uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; status = "okay"; }; diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 0efb1560fc35..c6225191141f 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -65,16 +65,12 @@ BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| PIN_SLPM_PDIS_ENABLED); BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| PIN_SLPM_PDIS_DISABLED); -BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_DISABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \ @@ -375,51 +371,11 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * TODO: set for snowball and HREF really?? */ DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu), - /* - * UART0, we do not mux in u0 here. - * uart-0 pins gpio configuration should be kept intact to prevent - * a glitch in tx line when the tty dev is opened. Later these pins - * are configured by uart driver - */ - DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ - DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */ - /* - * Mux in UART2 on altfunction C and set pull-ups. - * TODO: is this used on U8500 variants and Snowball really? - * The setting on GPIO31 conflicts with magnetometer use on hrefv60 - */ - /* default state for UART2 */ - DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), - DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ - DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ - /* Sleep state for UART2 */ - DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), - DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), /* * The following pin sets were known as "runtime pins" before being * converted to the pinctrl model. Here we model them as "default" * states. */ - /* Mux in UART0 after initialization */ - DB8500_MUX("u0_a_1", "u0", "uart0"), - DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ - DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ - DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ - DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* Sleep state for UART0 */ - DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"), - /* Mux in UART1 after initialization */ - DB8500_MUX("u1rxtx_a_1", "u1", "uart1"), - DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */ - DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */ - /* Sleep state for UART1 */ - DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"), - DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"), /* MSP1 for ALSA codec */ DB8500_MUX_HOG("msp1txrx_a_1", "msp1"), DB8500_MUX_HOG("msp1_a_1", "msp1"), @@ -822,10 +778,6 @@ static struct pinctrl_map __initdata mop500_pinmap[] = { DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* TC35892 IRQ, pull up the line, let the driver mux in the pin */ DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), - /* Mux in UART1 and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ /* * Runtime stuff: make it possible to mux in the SKE keypad * and bias the pins @@ -971,10 +923,6 @@ static struct pinctrl_map __initdata hrefv60_pinmap[] = { }; static struct pinctrl_map __initdata u9500_pinmap[] = { - /* Mux in UART1 (just RX/TX) and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), - DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* WLAN_IRQ line */ DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), /* HSI */