ARM: imx25: Remove eukrea mx25 board files
eukrea mx25 is well supported in device tree, so let's get rid of its board files. Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Fabio Estevam
Shawn Guo
parent
f027e601f8
commit
3877942b0c
4 changed files with 0 additions and 518 deletions
|
|
@ -149,40 +149,6 @@ config MACH_MX21ADS
|
|||
Include support for MX21ADS platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
comment "MX25 platforms:"
|
||||
|
||||
config MACH_EUKREA_CPUIMX25SD
|
||||
bool "Support Eukrea CPUIMX25 Platform"
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select USB_ULPI_VIEWPORT if USB_ULPI
|
||||
select SOC_IMX25
|
||||
|
||||
choice
|
||||
prompt "Baseboard"
|
||||
depends on MACH_EUKREA_CPUIMX25SD
|
||||
default MACH_EUKREA_MBIMXSD25_BASEBOARD
|
||||
|
||||
config MACH_EUKREA_MBIMXSD25_BASEBOARD
|
||||
bool "Eukrea MBIMXSD development board"
|
||||
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select LEDS_GPIO_REGISTER
|
||||
help
|
||||
This adds board specific devices that can be found on Eukrea's
|
||||
MBIMXSD evaluation board.
|
||||
|
||||
endchoice
|
||||
|
||||
config MACH_IMX25_DT
|
||||
bool "Support i.MX25 platforms from device tree"
|
||||
select SOC_IMX25
|
||||
|
|
|
|||
|
|
@ -49,8 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
|
|||
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
|
||||
|
||||
# i.MX25 based machines
|
||||
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
|
||||
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
|
||||
obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
|
||||
|
||||
# i.MX27 based machines
|
||||
|
|
|
|||
|
|
@ -1,310 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
|
||||
*
|
||||
* Based on pcm970-baseboard.c which is :
|
||||
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "devices-imx25.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx25.h"
|
||||
#include "mx25.h"
|
||||
|
||||
static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
|
||||
/* LCD */
|
||||
MX25_PAD_LD0__LD0,
|
||||
MX25_PAD_LD1__LD1,
|
||||
MX25_PAD_LD2__LD2,
|
||||
MX25_PAD_LD3__LD3,
|
||||
MX25_PAD_LD4__LD4,
|
||||
MX25_PAD_LD5__LD5,
|
||||
MX25_PAD_LD6__LD6,
|
||||
MX25_PAD_LD7__LD7,
|
||||
MX25_PAD_LD8__LD8,
|
||||
MX25_PAD_LD9__LD9,
|
||||
MX25_PAD_LD10__LD10,
|
||||
MX25_PAD_LD11__LD11,
|
||||
MX25_PAD_LD12__LD12,
|
||||
MX25_PAD_LD13__LD13,
|
||||
MX25_PAD_LD14__LD14,
|
||||
MX25_PAD_LD15__LD15,
|
||||
MX25_PAD_GPIO_E__LD16,
|
||||
MX25_PAD_GPIO_F__LD17,
|
||||
MX25_PAD_HSYNC__HSYNC,
|
||||
MX25_PAD_VSYNC__VSYNC,
|
||||
MX25_PAD_LSCLK__LSCLK,
|
||||
MX25_PAD_OE_ACD__OE_ACD,
|
||||
MX25_PAD_CONTRAST__CONTRAST,
|
||||
/* LCD_PWR */
|
||||
MX25_PAD_PWM__GPIO_1_26,
|
||||
/* LED */
|
||||
MX25_PAD_POWER_FAIL__GPIO_3_19,
|
||||
/* SWITCH */
|
||||
MX25_PAD_VSTBY_ACK__GPIO_3_18,
|
||||
/* UART2 */
|
||||
MX25_PAD_UART2_RTS__UART2_RTS,
|
||||
MX25_PAD_UART2_CTS__UART2_CTS,
|
||||
MX25_PAD_UART2_TXD__UART2_TXD,
|
||||
MX25_PAD_UART2_RXD__UART2_RXD,
|
||||
/* SD1 */
|
||||
MX25_PAD_SD1_CMD__SD1_CMD,
|
||||
MX25_PAD_SD1_CLK__SD1_CLK,
|
||||
MX25_PAD_SD1_DATA0__SD1_DATA0,
|
||||
MX25_PAD_SD1_DATA1__SD1_DATA1,
|
||||
MX25_PAD_SD1_DATA2__SD1_DATA2,
|
||||
MX25_PAD_SD1_DATA3__SD1_DATA3,
|
||||
/* SD1 CD */
|
||||
MX25_PAD_DE_B__GPIO_2_20,
|
||||
/* I2S */
|
||||
MX25_PAD_KPP_COL3__AUD5_TXFS,
|
||||
MX25_PAD_KPP_COL2__AUD5_TXC,
|
||||
MX25_PAD_KPP_COL1__AUD5_RXD,
|
||||
MX25_PAD_KPP_COL0__AUD5_TXD,
|
||||
/* CAN */
|
||||
MX25_PAD_GPIO_D__CAN2_RX,
|
||||
MX25_PAD_GPIO_C__CAN2_TX,
|
||||
/* SPI1 */
|
||||
MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
|
||||
MX25_PAD_CSPI1_MISO__CSPI1_MISO,
|
||||
MX25_PAD_CSPI1_SS0__GPIO_1_16,
|
||||
MX25_PAD_CSPI1_SS1__GPIO_1_17,
|
||||
MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
|
||||
MX25_PAD_CSPI1_RDY__GPIO_2_22,
|
||||
};
|
||||
|
||||
#define GPIO_LED1 IMX_GPIO_NR(3, 19)
|
||||
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18)
|
||||
#define GPIO_SD1CD IMX_GPIO_NR(2, 20)
|
||||
#define GPIO_LCDPWR IMX_GPIO_NR(1, 26)
|
||||
#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16)
|
||||
#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17)
|
||||
#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22)
|
||||
|
||||
static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
|
||||
{
|
||||
.mode = {
|
||||
.name = "CMO-QVGA",
|
||||
.refresh = 60,
|
||||
.xres = 320,
|
||||
.yres = 240,
|
||||
.pixclock = KHZ2PICOS(6500),
|
||||
.left_margin = 30,
|
||||
.right_margin = 38,
|
||||
.upper_margin = 20,
|
||||
.lower_margin = 3,
|
||||
.hsync_len = 15,
|
||||
.vsync_len = 4,
|
||||
},
|
||||
.bpp = 16,
|
||||
.pcr = 0xCAD08B80,
|
||||
}, {
|
||||
.mode = {
|
||||
.name = "DVI-VGA",
|
||||
.refresh = 60,
|
||||
.xres = 640,
|
||||
.yres = 480,
|
||||
.pixclock = 32000,
|
||||
.hsync_len = 7,
|
||||
.left_margin = 100,
|
||||
.right_margin = 100,
|
||||
.vsync_len = 7,
|
||||
.upper_margin = 7,
|
||||
.lower_margin = 100,
|
||||
},
|
||||
.pcr = 0xFA208B80,
|
||||
.bpp = 16,
|
||||
}, {
|
||||
.mode = {
|
||||
.name = "DVI-SVGA",
|
||||
.refresh = 60,
|
||||
.xres = 800,
|
||||
.yres = 600,
|
||||
.pixclock = 25000,
|
||||
.hsync_len = 7,
|
||||
.left_margin = 75,
|
||||
.right_margin = 75,
|
||||
.vsync_len = 7,
|
||||
.upper_margin = 7,
|
||||
.lower_margin = 75,
|
||||
},
|
||||
.pcr = 0xFA208B80,
|
||||
.bpp = 16,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
|
||||
.mode = eukrea_mximxsd_modes,
|
||||
.num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
|
||||
.pwmr = 0x00A903FF,
|
||||
.lscr1 = 0x00120300,
|
||||
.dmacr = 0x00040060,
|
||||
};
|
||||
|
||||
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
|
||||
unsigned int power)
|
||||
{
|
||||
if (power)
|
||||
gpio_direction_output(GPIO_LCDPWR, 1);
|
||||
else
|
||||
gpio_direction_output(GPIO_LCDPWR, 0);
|
||||
}
|
||||
|
||||
static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
|
||||
.set_power = eukrea_mbimxsd_lcd_power_set,
|
||||
};
|
||||
|
||||
static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
|
||||
.name = "platform-lcd",
|
||||
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
|
||||
};
|
||||
|
||||
static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
|
||||
{
|
||||
.name = "led1",
|
||||
.default_trigger = "heartbeat",
|
||||
.active_low = 1,
|
||||
.gpio = GPIO_LED1,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct gpio_led_platform_data
|
||||
eukrea_mbimxsd_led_info __initconst = {
|
||||
.leds = eukrea_mbimxsd_leds,
|
||||
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
|
||||
};
|
||||
|
||||
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
|
||||
{
|
||||
.gpio = GPIO_SWITCH1,
|
||||
.code = BTN_0,
|
||||
.desc = "BP1",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct gpio_keys_platform_data
|
||||
eukrea_mbimxsd_button_data __initconst = {
|
||||
.buttons = eukrea_mbimxsd_gpio_buttons,
|
||||
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&eukrea_mbimxsd_lcd_powerdev,
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
||||
},
|
||||
};
|
||||
|
||||
static const
|
||||
struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
|
||||
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
|
||||
};
|
||||
|
||||
static struct esdhc_platform_data sd1_pdata = {
|
||||
.cd_gpio = GPIO_SD1CD,
|
||||
.cd_type = ESDHC_CD_GPIO,
|
||||
.wp_type = ESDHC_WP_NONE,
|
||||
};
|
||||
|
||||
static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
|
||||
{
|
||||
.modalias = "spidev",
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.mode = SPI_MODE_0,
|
||||
},
|
||||
{
|
||||
.modalias = "spidev",
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 1,
|
||||
.mode = SPI_MODE_0,
|
||||
},
|
||||
};
|
||||
|
||||
static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
|
||||
|
||||
static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
|
||||
.chipselect = eukrea_mbimxsd25_spi_cs,
|
||||
.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
|
||||
};
|
||||
|
||||
/*
|
||||
* system init for baseboard usage. Will be called by cpuimx25 init.
|
||||
*
|
||||
* Add platform devices present on this baseboard and init
|
||||
* them from CPU side as far as required to use them later on
|
||||
*/
|
||||
void __init eukrea_mbimxsd25_baseboard_init(void)
|
||||
{
|
||||
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
|
||||
ARRAY_SIZE(eukrea_mbimxsd_pads)))
|
||||
printk(KERN_ERR "error setting mbimxsd pads !\n");
|
||||
|
||||
imx25_add_imx_uart1(&uart_pdata);
|
||||
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
|
||||
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
|
||||
|
||||
imx25_add_flexcan1();
|
||||
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
|
||||
|
||||
gpio_request(GPIO_LED1, "LED1");
|
||||
gpio_direction_output(GPIO_LED1, 1);
|
||||
gpio_free(GPIO_LED1);
|
||||
|
||||
gpio_request(GPIO_SWITCH1, "SWITCH1");
|
||||
gpio_direction_input(GPIO_SWITCH1);
|
||||
gpio_free(GPIO_SWITCH1);
|
||||
|
||||
gpio_request(GPIO_LCDPWR, "LCDPWR");
|
||||
gpio_direction_output(GPIO_LCDPWR, 1);
|
||||
|
||||
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
|
||||
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
|
||||
|
||||
gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
|
||||
gpio_direction_input(GPIO_SPI1_IRQ);
|
||||
gpio_free(GPIO_SPI1_IRQ);
|
||||
imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
|
||||
spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
|
||||
ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
|
||||
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
|
||||
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
|
||||
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
|
||||
}
|
||||
|
|
@ -1,172 +0,0 @@
|
|||
/*
|
||||
* Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
|
||||
* Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
||||
* Boston, MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "devices-imx25.h"
|
||||
#include "ehci.h"
|
||||
#include "eukrea-baseboards.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx25.h"
|
||||
#include "mx25.h"
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t eukrea_cpuimx25_pads[] __initconst = {
|
||||
/* FEC - RMII */
|
||||
MX25_PAD_FEC_MDC__FEC_MDC,
|
||||
MX25_PAD_FEC_MDIO__FEC_MDIO,
|
||||
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
|
||||
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
|
||||
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
|
||||
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
|
||||
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
|
||||
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
|
||||
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
||||
/* I2C1 */
|
||||
MX25_PAD_I2C1_CLK__I2C1_CLK,
|
||||
MX25_PAD_I2C1_DAT__I2C1_DAT,
|
||||
};
|
||||
|
||||
static const struct fec_platform_data mx25_fec_pdata __initconst = {
|
||||
.phy = PHY_INTERFACE_MODE_RMII,
|
||||
};
|
||||
|
||||
static const struct mxc_nand_platform_data
|
||||
eukrea_cpuimx25_nand_board_info __initconst = {
|
||||
.width = 1,
|
||||
.hw_ecc = 1,
|
||||
.flash_bbt = 1,
|
||||
};
|
||||
|
||||
static const struct imxi2c_platform_data
|
||||
eukrea_cpuimx25_i2c0_data __initconst = {
|
||||
.bitrate = 100000,
|
||||
};
|
||||
|
||||
static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8563", 0x51),
|
||||
},
|
||||
};
|
||||
|
||||
static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
|
||||
}
|
||||
|
||||
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
|
||||
.init = eukrea_cpuimx25_otg_init,
|
||||
.portsc = MXC_EHCI_MODE_UTMI,
|
||||
};
|
||||
|
||||
static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
|
||||
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
|
||||
}
|
||||
|
||||
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
|
||||
.init = eukrea_cpuimx25_usbh2_init,
|
||||
.portsc = MXC_EHCI_MODE_SERIAL,
|
||||
};
|
||||
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI,
|
||||
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
|
||||
};
|
||||
|
||||
static bool otg_mode_host __initdata;
|
||||
|
||||
static int __init eukrea_cpuimx25_otg_mode(char *options)
|
||||
{
|
||||
if (!strcmp(options, "host"))
|
||||
otg_mode_host = true;
|
||||
else if (!strcmp(options, "device"))
|
||||
otg_mode_host = false;
|
||||
else
|
||||
pr_info("otg_mode neither \"host\" nor \"device\". "
|
||||
"Defaulting to device\n");
|
||||
return 1;
|
||||
}
|
||||
__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
|
||||
|
||||
static void __init eukrea_cpuimx25_init(void)
|
||||
{
|
||||
imx25_soc_init();
|
||||
|
||||
if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
|
||||
ARRAY_SIZE(eukrea_cpuimx25_pads)))
|
||||
printk(KERN_ERR "error setting cpuimx25 pads !\n");
|
||||
|
||||
imx25_add_imx_uart0(&uart_pdata);
|
||||
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
|
||||
imx25_add_imxdi_rtc();
|
||||
imx25_add_fec(&mx25_fec_pdata);
|
||||
imx25_add_imx2_wdt();
|
||||
|
||||
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
|
||||
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
|
||||
imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
|
||||
|
||||
if (otg_mode_host)
|
||||
imx25_add_mxc_ehci_otg(&otg_pdata);
|
||||
else
|
||||
imx25_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
imx25_add_mxc_ehci_hs(&usbh2_pdata);
|
||||
|
||||
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
|
||||
eukrea_mbimxsd25_baseboard_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void __init eukrea_cpuimx25_timer_init(void)
|
||||
{
|
||||
mx25_clocks_init();
|
||||
}
|
||||
|
||||
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
|
||||
/* Maintainer: Eukrea Electromatique */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = mx25_map_io,
|
||||
.init_early = imx25_init_early,
|
||||
.init_irq = mx25_init_irq,
|
||||
.init_time = eukrea_cpuimx25_timer_init,
|
||||
.init_machine = eukrea_cpuimx25_init,
|
||||
.restart = mxc_restart,
|
||||
MACHINE_END
|
||||
Loading…
Reference in a new issue