diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt new file mode 100644 index 000000000000..daa768956069 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt @@ -0,0 +1,83 @@ +Lantiq FALCON pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-falcon" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, + jtag, slic, pcm, asc1 + + functions: + rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down +- lantiq,drive-current: Boolean, enables drive-current +- lantiq,slew-rate: Boolean, enables slew-rate + +Example: + pinmux0 { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + i2c { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt new file mode 100644 index 000000000000..b5469db1d7ad --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt @@ -0,0 +1,97 @@ +Lantiq XWAY pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, + req3 + + additional mux groups (XR9 only): + mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- lantiq,open-drain: Boolean, enables open-drain on the defined pin. + +Valid values for XWAY pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for XR9 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Example: + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 386ff651ecaf..c0cbde6c1770 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -242,6 +242,8 @@ config LANTIQ select HAVE_MACH_CLKDEV select CLKDEV_LOOKUP select USE_OF + select PINCTRL + select PINCTRL_LANTIQ config LASAT bool "LASAT Networks platforms" diff --git a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h index 318f982f04ff..c6b63a409641 100644 --- a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h +++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h @@ -20,4 +20,6 @@ #define MIPS_CPU_TIMER_IRQ 7 +#define MAX_IM 5 + #endif /* _FALCON_IRQ__ */ diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h index b385252584ee..fccac3592651 100644 --- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h @@ -57,6 +57,10 @@ extern __iomem void *ltq_sys1_membase; #define ltq_sys1_w32_mask(clear, set, reg) \ ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg) +/* allow the gpio and pinctrl drivers to talk to eachother */ +extern int pinctrl_falcon_get_range_size(int id); +extern void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range); + /* * to keep the irq code generic we need to define this to 0 as falcon * has no EIU/EBU diff --git a/arch/mips/include/asm/mach-lantiq/gpio.h b/arch/mips/include/asm/mach-lantiq/gpio.h index f79505b43609..9ba1caebca5f 100644 --- a/arch/mips/include/asm/mach-lantiq/gpio.h +++ b/arch/mips/include/asm/mach-lantiq/gpio.h @@ -1,10 +1,7 @@ #ifndef __ASM_MIPS_MACH_LANTIQ_GPIO_H #define __ASM_MIPS_MACH_LANTIQ_GPIO_H -static inline int gpio_to_irq(unsigned int gpio) -{ - return -1; -} +#define gpio_to_irq __gpio_to_irq #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h index aa0b3b866f84..5eadfe582529 100644 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h @@ -21,4 +21,6 @@ #define MIPS_CPU_TIMER_IRQ 7 +#define MAX_IM 5 + #endif diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 20bdf40b3efa..d84f361f1e45 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -2,6 +2,7 @@ if LANTIQ config SOC_TYPE_XWAY bool + select PINCTRL_XWAY default n choice @@ -19,6 +20,7 @@ config SOC_XWAY config SOC_FALCON bool "FALCON" + select PINCTRL_FALCON endchoice diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c index c1d278f05a3a..aa9497947859 100644 --- a/arch/mips/lantiq/falcon/prom.c +++ b/arch/mips/lantiq/falcon/prom.c @@ -8,6 +8,8 @@ */ #include +#include +#include #include #include @@ -84,4 +86,7 @@ void __init ltq_soc_detect(struct ltq_soc_info *i) unreachable(); break; } + + board_nmi_handler_setup = ltq_soc_nmi_setup; + board_ejtag_handler_setup = ltq_soc_ejtag_setup; } diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c index ba0123d13d40..2d4ced332b37 100644 --- a/arch/mips/lantiq/falcon/sysctrl.c +++ b/arch/mips/lantiq/falcon/sysctrl.c @@ -171,6 +171,7 @@ static inline void clkdev_add_sys(const char *dev, unsigned int module, clk->cl.con_id = NULL; clk->cl.clk = clk; clk->module = module; + clk->bits = bits; clk->activate = sysctl_activate; clk->deactivate = sysctl_deactivate; clk->enable = sysctl_clken; diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index 57c1a4e51408..f36acd1b3808 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -55,8 +55,8 @@ */ #define LTQ_ICU_EBU_IRQ 22 -#define ltq_icu_w32(x, y) ltq_w32((x), ltq_icu_membase + (y)) -#define ltq_icu_r32(x) ltq_r32(ltq_icu_membase + (x)) +#define ltq_icu_w32(m, x, y) ltq_w32((x), ltq_icu_membase[m] + (y)) +#define ltq_icu_r32(m, x) ltq_r32(ltq_icu_membase[m] + (x)) #define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y)) #define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x)) @@ -82,17 +82,18 @@ static unsigned short ltq_eiu_irq[MAX_EIU] = { }; static int exin_avail; -static void __iomem *ltq_icu_membase; +static void __iomem *ltq_icu_membase[MAX_IM]; static void __iomem *ltq_eiu_membase; +static struct irq_domain *ltq_domain; void ltq_disable_irq(struct irq_data *d) { u32 ier = LTQ_ICU_IM0_IER; int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - ier += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET); offset %= INT_NUM_IM_OFFSET; - ltq_icu_w32(ltq_icu_r32(ier) & ~BIT(offset), ier); + ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); } void ltq_mask_and_ack_irq(struct irq_data *d) @@ -100,32 +101,31 @@ void ltq_mask_and_ack_irq(struct irq_data *d) u32 ier = LTQ_ICU_IM0_IER; u32 isr = LTQ_ICU_IM0_ISR; int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - ier += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET); - isr += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET); offset %= INT_NUM_IM_OFFSET; - ltq_icu_w32(ltq_icu_r32(ier) & ~BIT(offset), ier); - ltq_icu_w32(BIT(offset), isr); + ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); + ltq_icu_w32(im, BIT(offset), isr); } static void ltq_ack_irq(struct irq_data *d) { u32 isr = LTQ_ICU_IM0_ISR; int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - isr += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET); offset %= INT_NUM_IM_OFFSET; - ltq_icu_w32(BIT(offset), isr); + ltq_icu_w32(im, BIT(offset), isr); } void ltq_enable_irq(struct irq_data *d) { u32 ier = LTQ_ICU_IM0_IER; int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE; + int im = offset / INT_NUM_IM_OFFSET; - ier += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET); offset %= INT_NUM_IM_OFFSET; - ltq_icu_w32(ltq_icu_r32(ier) | BIT(offset), ier); + ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier); } static unsigned int ltq_startup_eiu_irq(struct irq_data *d) @@ -192,7 +192,7 @@ static void ltq_hw_irqdispatch(int module) { u32 irq; - irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET)); + irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR); if (irq == 0) return; @@ -220,10 +220,14 @@ DEFINE_HWx_IRQDISPATCH(2) DEFINE_HWx_IRQDISPATCH(3) DEFINE_HWx_IRQDISPATCH(4) +#if MIPS_CPU_TIMER_IRQ == 7 static void ltq_hw5_irqdispatch(void) { do_IRQ(MIPS_CPU_TIMER_IRQ); } +#else +DEFINE_HWx_IRQDISPATCH(5) +#endif #ifdef CONFIG_MIPS_MT_SMP void __init arch_init_ipiirq(int irq, struct irqaction *action) @@ -271,11 +275,11 @@ asmlinkage void plat_irq_dispatch(void) unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; unsigned int i; - if (pending & CAUSEF_IP7) { + if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) { do_IRQ(MIPS_CPU_TIMER_IRQ); goto out; } else { - for (i = 0; i < 5; i++) { + for (i = 0; i < MAX_IM; i++) { if (pending & (CAUSEF_IP2 << i)) { ltq_hw_irqdispatch(i); goto out; @@ -293,6 +297,9 @@ static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) struct irq_chip *chip = <q_irq_type; int i; + if (hw < MIPS_CPU_IRQ_CASCADE) + return 0; + for (i = 0; i < exin_avail; i++) if (hw == ltq_eiu_irq[i]) chip = <q_eiu_type; @@ -318,19 +325,23 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) struct resource res; int i; - if (of_address_to_resource(node, 0, &res)) - panic("Failed to get icu memory range"); + for (i = 0; i < MAX_IM; i++) { + if (of_address_to_resource(node, i, &res)) + panic("Failed to get icu memory range"); - if (request_mem_region(res.start, resource_size(&res), res.name) < 0) - pr_err("Failed to request icu memory"); + if (request_mem_region(res.start, resource_size(&res), + res.name) < 0) + pr_err("Failed to request icu memory"); - ltq_icu_membase = ioremap_nocache(res.start, resource_size(&res)); - if (!ltq_icu_membase) - panic("Failed to remap icu memory"); + ltq_icu_membase[i] = ioremap_nocache(res.start, + resource_size(&res)); + if (!ltq_icu_membase[i]) + panic("Failed to remap icu memory"); + } /* the external interrupts are optional and xway only */ eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu"); - if (eiu_node && of_address_to_resource(eiu_node, 0, &res)) { + if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) { /* find out how many external irq sources we have */ const __be32 *count = of_get_property(node, "lantiq,count", NULL); @@ -351,17 +362,17 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) } /* turn off all irqs by default */ - for (i = 0; i < 5; i++) { + for (i = 0; i < MAX_IM; i++) { /* make sure all irqs are turned off by default */ - ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET)); + ltq_icu_w32(i, 0, LTQ_ICU_IM0_IER); /* clear all possibly pending interrupts */ - ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET)); + ltq_icu_w32(i, ~0, LTQ_ICU_IM0_ISR); } mips_cpu_irq_init(); - for (i = 2; i <= 6; i++) - setup_irq(i, &cascade); + for (i = 0; i < MAX_IM; i++) + setup_irq(i + 2, &cascade); if (cpu_has_vint) { pr_info("Setting up vectored interrupts\n"); @@ -373,7 +384,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) set_vi_handler(7, ltq_hw5_irqdispatch); } - irq_domain_add_linear(node, 6 * INT_NUM_IM_OFFSET, + ltq_domain = irq_domain_add_linear(node, + (MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE, &irq_domain_ops, 0); #if defined(CONFIG_MIPS_MT_SMP) @@ -397,12 +409,20 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) /* tell oprofile which irq to use */ cp0_perfcount_irq = LTQ_PERF_IRQ; + + /* + * if the timer irq is not one of the mips irqs we need to + * create a mapping + */ + if (MIPS_CPU_TIMER_IRQ != 7) + irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ); + return 0; } unsigned int __cpuinit get_c0_compare_int(void) { - return CP0_LEGACY_COMPARE_IRQ; + return MIPS_CPU_TIMER_IRQ; } static struct of_device_id __initdata of_irq_ids[] = { diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile index dc3194f6ee42..70a58c747bd0 100644 --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1 +1 @@ -obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o +obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c deleted file mode 100644 index 2ab39e93d9be..000000000000 --- a/arch/mips/lantiq/xway/gpio.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin - */ - -#include -#include -#include -#include -#include -#include - -#include - -#define LTQ_GPIO_OUT 0x00 -#define LTQ_GPIO_IN 0x04 -#define LTQ_GPIO_DIR 0x08 -#define LTQ_GPIO_ALTSEL0 0x0C -#define LTQ_GPIO_ALTSEL1 0x10 -#define LTQ_GPIO_OD 0x14 - -#define PINS_PER_PORT 16 -#define MAX_PORTS 3 - -#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) -#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r) -#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r) - -struct ltq_gpio { - void __iomem *membase; - struct gpio_chip chip; -}; - -static struct ltq_gpio ltq_gpio_port[MAX_PORTS]; - -int ltq_gpio_request(unsigned int pin, unsigned int alt0, - unsigned int alt1, unsigned int dir, const char *name) -{ - int id = 0; - - if (pin >= (MAX_PORTS * PINS_PER_PORT)) - return -EINVAL; - if (gpio_request(pin, name)) { - pr_err("failed to setup lantiq gpio: %s\n", name); - return -EBUSY; - } - if (dir) - gpio_direction_output(pin, 1); - else - gpio_direction_input(pin); - while (pin >= PINS_PER_PORT) { - pin -= PINS_PER_PORT; - id++; - } - if (alt0) - ltq_gpio_setbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL0, pin); - else - ltq_gpio_clearbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL0, pin); - if (alt1) - ltq_gpio_setbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL1, pin); - else - ltq_gpio_clearbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL1, pin); - return 0; -} -EXPORT_SYMBOL(ltq_gpio_request); - -static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - if (value) - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); - else - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); -} - -static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset); -} - -static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); - - return 0; -} - -static int ltq_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); - ltq_gpio_set(chip, offset, value); - - return 0; -} - -static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset); - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset); - return 0; -} - -static int ltq_gpio_probe(struct platform_device *pdev) -{ - struct resource *res; - - if (pdev->id >= MAX_PORTS) { - dev_err(&pdev->dev, "invalid gpio port %d\n", - pdev->id); - return -EINVAL; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get memory for gpio port %d\n", - pdev->id); - return -ENOENT; - } - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, - "failed to request memory for gpio port %d\n", - pdev->id); - return -EBUSY; - } - ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev, - res->start, resource_size(res)); - if (!ltq_gpio_port[pdev->id].membase) { - dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n", - pdev->id); - return -ENOMEM; - } - ltq_gpio_port[pdev->id].chip.label = "ltq_gpio"; - ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input; - ltq_gpio_port[pdev->id].chip.direction_output = - ltq_gpio_direction_output; - ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get; - ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set; - ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req; - ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id; - ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT; - platform_set_drvdata(pdev, <q_gpio_port[pdev->id]); - return gpiochip_add(<q_gpio_port[pdev->id].chip); -} - -static struct platform_driver -ltq_gpio_driver = { - .probe = ltq_gpio_probe, - .driver = { - .name = "ltq_gpio", - .owner = THIS_MODULE, - }, -}; - -int __init ltq_gpio_init(void) -{ - int ret = platform_driver_register(<q_gpio_driver); - - if (ret) - pr_info("ltq_gpio : Error registering platform driver!"); - return ret; -} - -postcore_initcall(ltq_gpio_init); diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c new file mode 100644 index 000000000000..cbb56fc022bc --- /dev/null +++ b/arch/mips/lantiq/xway/gptu.c @@ -0,0 +1,214 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin + * Copyright (C) 2012 Lantiq GmbH + */ + +#include +#include +#include +#include +#include + +#include +#include "../clk.h" + +/* the magic ID byte of the core */ +#define GPTU_MAGIC 0x59 +/* clock control register */ +#define GPTU_CLC 0x00 +/* id register */ +#define GPTU_ID 0x08 +/* interrupt node enable */ +#define GPTU_IRNEN 0xf4 +/* interrupt control register */ +#define GPTU_IRCR 0xf8 +/* interrupt capture register */ +#define GPTU_IRNCR 0xfc +/* there are 3 identical blocks of 2 timers. calculate register offsets */ +#define GPTU_SHIFT(x) (x % 2 ? 4 : 0) +#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10) +/* timer control register */ +#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00) +/* timer auto reload register */ +#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08) +/* timer manual reload register */ +#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10) +/* timer count register */ +#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18) + +/* GPTU_CON(x) */ +#define CON_CNT BIT(2) +#define CON_EDGE_ANY (BIT(7) | BIT(6)) +#define CON_SYNC BIT(8) +#define CON_CLK_INT BIT(10) + +/* GPTU_RUN(x) */ +#define RUN_SEN BIT(0) +#define RUN_RL BIT(2) + +/* set clock to runmode */ +#define CLC_RMC BIT(8) +/* bring core out of suspend */ +#define CLC_SUSPEND BIT(4) +/* the disable bit */ +#define CLC_DISABLE BIT(0) + +#define gptu_w32(x, y) ltq_w32((x), gptu_membase + (y)) +#define gptu_r32(x) ltq_r32(gptu_membase + (x)) + +enum gptu_timer { + TIMER1A = 0, + TIMER1B, + TIMER2A, + TIMER2B, + TIMER3A, + TIMER3B +}; + +static void __iomem *gptu_membase; +static struct resource irqres[6]; + +static irqreturn_t timer_irq_handler(int irq, void *priv) +{ + int timer = irq - irqres[0].start; + gptu_w32(1 << timer, GPTU_IRNCR); + return IRQ_HANDLED; +} + +static void gptu_hwinit(void) +{ + gptu_w32(0x00, GPTU_IRNEN); + gptu_w32(0xff, GPTU_IRNCR); + gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC); +} + +static void gptu_hwexit(void) +{ + gptu_w32(0x00, GPTU_IRNEN); + gptu_w32(0xff, GPTU_IRNCR); + gptu_w32(CLC_DISABLE, GPTU_CLC); +} + +static int gptu_enable(struct clk *clk) +{ + int ret = request_irq(irqres[clk->bits].start, timer_irq_handler, + IRQF_TIMER, "gtpu", NULL); + if (ret) { + pr_err("gptu: failed to request irq\n"); + return ret; + } + + gptu_w32(CON_CNT | CON_EDGE_ANY | CON_SYNC | CON_CLK_INT, + GPTU_CON(clk->bits)); + gptu_w32(1, GPTU_RLD(clk->bits)); + gptu_w32(gptu_r32(GPTU_IRNEN) | BIT(clk->bits), GPTU_IRNEN); + gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits)); + return 0; +} + +static void gptu_disable(struct clk *clk) +{ + gptu_w32(0, GPTU_RUN(clk->bits)); + gptu_w32(0, GPTU_CON(clk->bits)); + gptu_w32(0, GPTU_RLD(clk->bits)); + gptu_w32(gptu_r32(GPTU_IRNEN) & ~BIT(clk->bits), GPTU_IRNEN); + free_irq(irqres[clk->bits].start, NULL); +} + +static inline void clkdev_add_gptu(struct device *dev, const char *con, + unsigned int timer) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev_name(dev); + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = gptu_enable; + clk->disable = gptu_disable; + clk->bits = timer; + clkdev_add(&clk->cl); +} + +static int __devinit gptu_probe(struct platform_device *pdev) +{ + struct clk *clk; + struct resource *res; + + if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 6) != 6) { + dev_err(&pdev->dev, "Failed to get IRQ list\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get resource\n"); + return -ENOMEM; + } + + /* remap gptu register range */ + gptu_membase = devm_request_and_ioremap(&pdev->dev, res); + if (!gptu_membase) { + dev_err(&pdev->dev, "Failed to remap resource\n"); + return -ENOMEM; + } + + /* enable our clock */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return -ENOENT; + } + clk_enable(clk); + + /* power up the core */ + gptu_hwinit(); + + /* the gptu has a ID register */ + if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) { + dev_err(&pdev->dev, "Failed to find magic\n"); + gptu_hwexit(); + return -ENAVAIL; + } + + /* register the clocks */ + clkdev_add_gptu(&pdev->dev, "timer1a", TIMER1A); + clkdev_add_gptu(&pdev->dev, "timer1b", TIMER1B); + clkdev_add_gptu(&pdev->dev, "timer2a", TIMER2A); + clkdev_add_gptu(&pdev->dev, "timer2b", TIMER2B); + clkdev_add_gptu(&pdev->dev, "timer3a", TIMER3A); + clkdev_add_gptu(&pdev->dev, "timer3b", TIMER3B); + + dev_info(&pdev->dev, "gptu: 6 timers loaded\n"); + + return 0; +} + +static const struct of_device_id gptu_match[] = { + { .compatible = "lantiq,gptu-xway" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dma_match); + +static struct platform_driver dma_driver = { + .probe = gptu_probe, + .driver = { + .name = "gptu-xway", + .owner = THIS_MODULE, + .of_match_table = gptu_match, + }, +}; + +int __init gptu_init(void) +{ + int ret = platform_driver_register(&dma_driver); + + if (ret) + pr_info("gptu: Error registering platform driver\n"); + return ret; +} + +arch_initcall(gptu_init); diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index befbb760ab76..67c3a91e54e7 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -145,7 +145,8 @@ static int pci_enable(struct clk *clk) { unsigned int val = ltq_cgu_r32(ifccr); /* set bus clock speed */ - if (of_machine_is_compatible("lantiq,ar9")) { + if (of_machine_is_compatible("lantiq,ar9") || + of_machine_is_compatible("lantiq,vr9")) { val &= ~0x1f00000; if (clk->rate == CLOCK_33M) val |= 0xe00000; diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c index e35096bf3cfb..8bead0bb6459 100644 --- a/drivers/gpio/gpio-stp-xway.c +++ b/drivers/gpio/gpio-stp-xway.c @@ -82,7 +82,7 @@ struct xway_stp { struct gpio_chip gc; void __iomem *virt; u32 edge; /* rising or falling edge triggered shift register */ - u16 shadow; /* shadow the shift registers state */ + u32 shadow; /* shadow the shift registers state */ u8 groups; /* we can drive 1-3 groups of 8bit each */ u8 dsl; /* the 2 LSBs can be driven by the dsl core */ u8 phy1; /* 3 bits can be driven by phy1 */ diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 54e3588bef62..45d2158a5374 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -55,10 +55,21 @@ config PINCTRL_IMX6Q help Say Y here to enable the imx6q pinctrl driver +config PINCTRL_LANTIQ + bool + depends on LANTIQ + select PINMUX + select PINCONF + config PINCTRL_PXA3xx bool select PINMUX +config PINCTRL_FALCON + bool + depends on SOC_FALCON + depends on PINCTRL_LANTIQ + config PINCTRL_MMP2 bool "MMP2 pin controller driver" depends on ARCH_MMP @@ -147,6 +158,11 @@ config PINCTRL_COH901 source "drivers/pinctrl/spear/Kconfig" +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + endmenu endif diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f40b1f81ff2c..c0566c84d7f0 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o +obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o @@ -29,5 +30,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o +obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o +obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c new file mode 100644 index 000000000000..ee7305903470 --- /dev/null +++ b/drivers/pinctrl/pinctrl-falcon.c @@ -0,0 +1,468 @@ +/* + * linux/drivers/pinctrl/pinmux-falcon.c + * based on linux/drivers/pinctrl/pinmux-pxa910.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 Thomas Langer + * Copyright (C) 2012 John Crispin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-lantiq.h" + +#include + +/* Multiplexer Control Register */ +#define LTQ_PADC_MUX(x) (x * 0x4) +/* Pull Up Enable Register */ +#define LTQ_PADC_PUEN 0x80 +/* Pull Down Enable Register */ +#define LTQ_PADC_PDEN 0x84 +/* Slew Rate Control Register */ +#define LTQ_PADC_SRC 0x88 +/* Drive Current Control Register */ +#define LTQ_PADC_DCC 0x8C +/* Pad Control Availability Register */ +#define LTQ_PADC_AVAIL 0xF0 + +#define pad_r32(p, reg) ltq_r32(p + reg) +#define pad_w32(p, val, reg) ltq_w32(val, p + reg) +#define pad_w32_mask(c, clear, set, reg) \ + pad_w32(c, (pad_r32(c, reg) & ~(clear)) | (set), reg) + +#define pad_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) + +#define PORTS 5 +#define PINS 32 +#define PORT(x) (x / PINS) +#define PORT_PIN(x) (x % PINS) + +#define MFP_FALCON(a, f0, f1, f2, f3) \ +{ \ + .name = #a, \ + .pin = a, \ + .func = { \ + FALCON_MUX_##f0, \ + FALCON_MUX_##f1, \ + FALCON_MUX_##f2, \ + FALCON_MUX_##f3, \ + }, \ +} + +#define GRP_MUX(a, m, p) \ +{ \ + .name = a, \ + .mux = FALCON_MUX_##m, \ + .pins = p, \ + .npins = ARRAY_SIZE(p), \ +} + +enum falcon_mux { + FALCON_MUX_GPIO = 0, + FALCON_MUX_RST, + FALCON_MUX_NTR, + FALCON_MUX_MDIO, + FALCON_MUX_LED, + FALCON_MUX_SPI, + FALCON_MUX_ASC, + FALCON_MUX_I2C, + FALCON_MUX_HOSTIF, + FALCON_MUX_SLIC, + FALCON_MUX_JTAG, + FALCON_MUX_PCM, + FALCON_MUX_MII, + FALCON_MUX_PHY, + FALCON_MUX_NONE = 0xffff, +}; + +static struct pinctrl_pin_desc falcon_pads[PORTS * PINS]; +static int pad_count[PORTS]; + +static void lantiq_load_pin_desc(struct pinctrl_pin_desc *d, int bank, int len) +{ + int base = bank * PINS; + int i; + + for (i = 0; i < len; i++) { + /* strlen("ioXYZ") + 1 = 6 */ + char *name = kzalloc(6, GFP_KERNEL); + snprintf(name, 6, "io%d", base + i); + d[i].number = base + i; + d[i].name = name; + } + pad_count[bank] = len; +} + +static struct ltq_mfp_pin falcon_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_FALCON(GPIO0, RST, GPIO, NONE, NONE), + MFP_FALCON(GPIO1, GPIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO2, GPIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO3, GPIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO4, NTR, GPIO, NONE, NONE), + MFP_FALCON(GPIO5, NTR, GPIO, NONE, NONE), + MFP_FALCON(GPIO6, RST, GPIO, NONE, NONE), + MFP_FALCON(GPIO7, MDIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO8, MDIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO9, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO10, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO11, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO12, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO13, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO14, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO32, ASC, GPIO, NONE, NONE), + MFP_FALCON(GPIO33, ASC, GPIO, NONE, NONE), + MFP_FALCON(GPIO34, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO35, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO36, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO37, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO38, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO39, I2C, GPIO, NONE, NONE), + MFP_FALCON(GPIO40, I2C, GPIO, NONE, NONE), + MFP_FALCON(GPIO41, HOSTIF, GPIO, HOSTIF, JTAG), + MFP_FALCON(GPIO42, HOSTIF, GPIO, HOSTIF, NONE), + MFP_FALCON(GPIO43, SLIC, GPIO, NONE, NONE), + MFP_FALCON(GPIO44, SLIC, GPIO, PCM, ASC), + MFP_FALCON(GPIO45, SLIC, GPIO, PCM, ASC), + MFP_FALCON(GPIO64, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO65, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO66, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO67, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO68, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO69, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO70, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO71, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO72, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO73, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO74, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO75, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO76, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO77, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO78, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO79, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO80, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO81, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO82, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO83, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO84, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO85, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO86, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO87, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO88, PHY, GPIO, NONE, NONE), +}; + +static const unsigned pins_por[] = {GPIO0}; +static const unsigned pins_ntr[] = {GPIO4}; +static const unsigned pins_ntr8k[] = {GPIO5}; +static const unsigned pins_hrst[] = {GPIO6}; +static const unsigned pins_mdio[] = {GPIO7, GPIO8}; +static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11, + GPIO12, GPIO13, GPIO14}; +static const unsigned pins_asc0[] = {GPIO32, GPIO33}; +static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36}; +static const unsigned pins_spi_cs0[] = {GPIO37}; +static const unsigned pins_spi_cs1[] = {GPIO38}; +static const unsigned pins_i2c[] = {GPIO39, GPIO40}; +static const unsigned pins_jtag[] = {GPIO41}; +static const unsigned pins_slic[] = {GPIO43, GPIO44, GPIO45}; +static const unsigned pins_pcm[] = {GPIO44, GPIO45}; +static const unsigned pins_asc1[] = {GPIO44, GPIO45}; + +static struct ltq_pin_group falcon_grps[] = { + GRP_MUX("por", RST, pins_por), + GRP_MUX("ntr", NTR, pins_ntr), + GRP_MUX("ntr8k", NTR, pins_ntr8k), + GRP_MUX("hrst", RST, pins_hrst), + GRP_MUX("mdio", MDIO, pins_mdio), + GRP_MUX("bootled", LED, pins_bled), + GRP_MUX("asc0", ASC, pins_asc0), + GRP_MUX("spi", SPI, pins_spi), + GRP_MUX("spi cs0", SPI, pins_spi_cs0), + GRP_MUX("spi cs1", SPI, pins_spi_cs1), + GRP_MUX("i2c", I2C, pins_i2c), + GRP_MUX("jtag", JTAG, pins_jtag), + GRP_MUX("slic", SLIC, pins_slic), + GRP_MUX("pcm", PCM, pins_pcm), + GRP_MUX("asc1", ASC, pins_asc1), +}; + +static const char * const ltq_rst_grps[] = {"por", "hrst"}; +static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k"}; +static const char * const ltq_mdio_grps[] = {"mdio"}; +static const char * const ltq_bled_grps[] = {"bootled"}; +static const char * const ltq_asc_grps[] = {"asc0", "asc1"}; +static const char * const ltq_spi_grps[] = {"spi", "spi cs0", "spi cs1"}; +static const char * const ltq_i2c_grps[] = {"i2c"}; +static const char * const ltq_jtag_grps[] = {"jtag"}; +static const char * const ltq_slic_grps[] = {"slic"}; +static const char * const ltq_pcm_grps[] = {"pcm"}; + +static struct ltq_pmx_func falcon_funcs[] = { + {"rst", ARRAY_AND_SIZE(ltq_rst_grps)}, + {"ntr", ARRAY_AND_SIZE(ltq_ntr_grps)}, + {"mdio", ARRAY_AND_SIZE(ltq_mdio_grps)}, + {"led", ARRAY_AND_SIZE(ltq_bled_grps)}, + {"asc", ARRAY_AND_SIZE(ltq_asc_grps)}, + {"spi", ARRAY_AND_SIZE(ltq_spi_grps)}, + {"i2c", ARRAY_AND_SIZE(ltq_i2c_grps)}, + {"jtag", ARRAY_AND_SIZE(ltq_jtag_grps)}, + {"slic", ARRAY_AND_SIZE(ltq_slic_grps)}, + {"pcm", ARRAY_AND_SIZE(ltq_pcm_grps)}, +}; + + + + +/* --------- pinconf related code --------- */ +static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev, + unsigned group, unsigned long *config) +{ + return -ENOTSUPP; +} + +static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev, + unsigned group, unsigned long config) +{ + return -ENOTSUPP; +} + +static int falcon_pinconf_get(struct pinctrl_dev *pctrldev, + unsigned pin, unsigned long *config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); + void __iomem *mem = info->membase[PORT(pin)]; + + switch (param) { + case LTQ_PINCONF_PARAM_DRIVE_CURRENT: + *config = LTQ_PINCONF_PACK(param, + !!pad_getbit(mem, LTQ_PADC_DCC, PORT_PIN(pin))); + break; + + case LTQ_PINCONF_PARAM_SLEW_RATE: + *config = LTQ_PINCONF_PACK(param, + !!pad_getbit(mem, LTQ_PADC_SRC, PORT_PIN(pin))); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (pad_getbit(mem, LTQ_PADC_PDEN, PORT_PIN(pin))) + *config = LTQ_PINCONF_PACK(param, 1); + else if (pad_getbit(mem, LTQ_PADC_PUEN, PORT_PIN(pin))) + *config = LTQ_PINCONF_PACK(param, 2); + else + *config = LTQ_PINCONF_PACK(param, 0); + + break; + + default: + return -ENOTSUPP; + } + + return 0; +} + +static int falcon_pinconf_set(struct pinctrl_dev *pctrldev, + unsigned pin, unsigned long config) +{ + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); + int arg = LTQ_PINCONF_UNPACK_ARG(config); + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + void __iomem *mem = info->membase[PORT(pin)]; + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_DRIVE_CURRENT: + reg = LTQ_PADC_DCC; + break; + + case LTQ_PINCONF_PARAM_SLEW_RATE: + reg = LTQ_PADC_SRC; + break; + + case LTQ_PINCONF_PARAM_PULL: + if (arg == 1) + reg = LTQ_PADC_PDEN; + else + reg = LTQ_PADC_PUEN; + break; + + default: + pr_err("%s: Invalid config param %04x\n", + pinctrl_dev_get_name(pctrldev), param); + return -ENOTSUPP; + } + + pad_w32(mem, BIT(PORT_PIN(pin)), reg); + if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) + return -ENOTSUPP; + return 0; +} + +static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev, + struct seq_file *s, unsigned offset) +{ +} + +static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev, + struct seq_file *s, unsigned selector) +{ +} + +struct pinconf_ops falcon_pinconf_ops = { + .pin_config_get = falcon_pinconf_get, + .pin_config_set = falcon_pinconf_set, + .pin_config_group_get = falcon_pinconf_group_get, + .pin_config_group_set = falcon_pinconf_group_set, + .pin_config_dbg_show = falcon_pinconf_dbg_show, + .pin_config_group_dbg_show = falcon_pinconf_group_dbg_show, +}; + +static struct pinctrl_desc falcon_pctrl_desc = { + .owner = THIS_MODULE, + .pins = falcon_pads, + .confops = &falcon_pinconf_ops, +}; + +static inline int falcon_mux_apply(struct pinctrl_dev *pctrldev, + int mfp, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(info->mfp[mfp].pin); + + if ((port >= PORTS) || (!info->membase[port])) + return -ENODEV; + + pad_w32(info->membase[port], mux, + LTQ_PADC_MUX(PORT_PIN(info->mfp[mfp].pin))); + return 0; +} + +static const struct ltq_cfg_param falcon_cfg_params[] = { + {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, + {"lantiq,drive-current", LTQ_PINCONF_PARAM_DRIVE_CURRENT}, + {"lantiq,slew-rate", LTQ_PINCONF_PARAM_SLEW_RATE}, +}; + +static struct ltq_pinmux_info falcon_info = { + .desc = &falcon_pctrl_desc, + .apply_mux = falcon_mux_apply, +}; + + + + +/* --------- register the pinctrl layer --------- */ + +int pinctrl_falcon_get_range_size(int id) +{ + u32 avail; + + if ((id >= PORTS) || (!falcon_info.membase[id])) + return -EINVAL; + + avail = pad_r32(falcon_info.membase[id], LTQ_PADC_AVAIL); + + return fls(avail); +} + +void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range) +{ + pinctrl_add_gpio_range(falcon_info.pctrl, range); +} + +static int pinctrl_falcon_probe(struct platform_device *pdev) +{ + struct device_node *np; + int pad_count = 0; + int ret = 0; + + /* load and remap the pad resources of the different banks */ + for_each_compatible_node(np, NULL, "lantiq,pad-falcon") { + struct platform_device *ppdev = of_find_device_by_node(np); + const __be32 *bank = of_get_property(np, "lantiq,bank", NULL); + struct resource res; + u32 avail; + int pins; + + if (!ppdev) { + dev_err(&pdev->dev, "failed to find pad pdev\n"); + continue; + } + if (!bank || *bank >= PORTS) + continue; + if (of_address_to_resource(np, 0, &res)) + continue; + falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL); + if (IS_ERR(falcon_info.clk[*bank])) { + dev_err(&ppdev->dev, "failed to get clock\n"); + return PTR_ERR(falcon_info.clk[*bank]); + } + falcon_info.membase[*bank] = + devm_request_and_ioremap(&pdev->dev, &res); + if (!falcon_info.membase[*bank]) { + dev_err(&pdev->dev, + "Failed to remap memory for bank %d\n", + *bank); + return -ENOMEM; + } + avail = pad_r32(falcon_info.membase[*bank], + LTQ_PADC_AVAIL); + pins = fls(avail); + lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins); + pad_count += pins; + clk_enable(falcon_info.clk[*bank]); + dev_dbg(&pdev->dev, "found %s with %d pads\n", + res.name, pins); + } + dev_dbg(&pdev->dev, "found a total of %d pads\n", pad_count); + falcon_pctrl_desc.name = dev_name(&pdev->dev); + falcon_pctrl_desc.npins = pad_count; + + falcon_info.mfp = falcon_mfp; + falcon_info.num_mfp = ARRAY_SIZE(falcon_mfp); + falcon_info.grps = falcon_grps; + falcon_info.num_grps = ARRAY_SIZE(falcon_grps); + falcon_info.funcs = falcon_funcs; + falcon_info.num_funcs = ARRAY_SIZE(falcon_funcs); + + ret = ltq_pinctrl_register(pdev, &falcon_info); + if (!ret) + dev_info(&pdev->dev, "Init done\n"); + return ret; +} + +static const struct of_device_id falcon_match[] = { + { .compatible = "lantiq,pinctrl-falcon" }, + {}, +}; +MODULE_DEVICE_TABLE(of, falcon_match); + +static struct platform_driver pinctrl_falcon_driver = { + .probe = pinctrl_falcon_probe, + .driver = { + .name = "pinctrl-falcon", + .owner = THIS_MODULE, + .of_match_table = falcon_match, + }, +}; + +int __init pinctrl_falcon_init(void) +{ + return platform_driver_register(&pinctrl_falcon_driver); +} + +core_initcall_sync(pinctrl_falcon_init); diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c new file mode 100644 index 000000000000..07ba7682cf22 --- /dev/null +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -0,0 +1,342 @@ +/* + * linux/drivers/pinctrl/pinctrl-lantiq.c + * based on linux/drivers/pinctrl/pinctrl-pxa3xx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin + */ + +#include +#include +#include +#include +#include +#include + +#include "pinctrl-lantiq.h" + +static int ltq_get_group_count(struct pinctrl_dev *pctrldev) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + return info->num_grps; +} + +static const char *ltq_get_group_name(struct pinctrl_dev *pctrldev, + unsigned selector) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + if (selector >= info->num_grps) + return NULL; + return info->grps[selector].name; +} + +static int ltq_get_group_pins(struct pinctrl_dev *pctrldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + if (selector >= info->num_grps) + return -EINVAL; + *pins = info->grps[selector].pins; + *num_pins = info->grps[selector].npins; + return 0; +} + +void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + kfree(map); +} + +static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} + +static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + unsigned long configs[3]; + unsigned num_configs = 0; + struct property *prop; + const char *group, *pin; + const char *function; + int ret, i; + + ret = of_property_read_string(np, "lantiq,function", &function); + if (!ret) { + of_property_for_each_string(np, "lantiq,groups", prop, group) { + (*map)->type = PIN_MAP_TYPE_MUX_GROUP; + (*map)->name = function; + (*map)->data.mux.group = group; + (*map)->data.mux.function = function; + (*map)++; + } + if (of_find_property(np, "lantiq,pins", NULL)) + dev_err(pctldev->dev, + "%s mixes pins and groups settings\n", + np->name); + return 0; + } + + for (i = 0; i < info->num_params; i++) { + u32 val; + int ret = of_property_read_u32(np, + info->params[i].property, &val); + if (!ret) + configs[num_configs++] = + LTQ_PINCONF_PACK(info->params[i].param, + val); + } + + if (!num_configs) + return -EINVAL; + + of_property_for_each_string(np, "lantiq,pins", prop, pin) { + (*map)->data.configs.configs = kmemdup(configs, + num_configs * sizeof(unsigned long), + GFP_KERNEL); + (*map)->type = PIN_MAP_TYPE_CONFIGS_PIN; + (*map)->name = pin; + (*map)->data.configs.group_or_pin = pin; + (*map)->data.configs.num_configs = num_configs; + (*map)++; + } + return 0; +} + +static int ltq_pinctrl_dt_subnode_size(struct device_node *np) +{ + int ret; + + ret = of_property_count_strings(np, "lantiq,groups"); + if (ret < 0) + ret = of_property_count_strings(np, "lantiq,pins"); + return ret; +} + +int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct pinctrl_map *tmp; + struct device_node *np; + int ret; + + *num_maps = 0; + for_each_child_of_node(np_config, np) + *num_maps += ltq_pinctrl_dt_subnode_size(np); + *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL); + if (!*map) + return -ENOMEM; + tmp = *map; + + for_each_child_of_node(np_config, np) { + ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); + if (ret < 0) { + ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + return 0; +} + +static struct pinctrl_ops ltq_pctrl_ops = { + .get_groups_count = ltq_get_group_count, + .get_group_name = ltq_get_group_name, + .get_group_pins = ltq_get_group_pins, + .pin_dbg_show = ltq_pinctrl_pin_dbg_show, + .dt_node_to_map = ltq_pinctrl_dt_node_to_map, + .dt_free_map = ltq_pinctrl_dt_free_map, +}; + +static int ltq_pmx_func_count(struct pinctrl_dev *pctrldev) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + return info->num_funcs; +} + +static const char *ltq_pmx_func_name(struct pinctrl_dev *pctrldev, + unsigned selector) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + if (selector >= info->num_funcs) + return NULL; + + return info->funcs[selector].name; +} + +static int ltq_pmx_get_groups(struct pinctrl_dev *pctrldev, + unsigned func, + const char * const **groups, + unsigned * const num_groups) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + *groups = info->funcs[func].groups; + *num_groups = info->funcs[func].num_groups; + + return 0; +} + +/* Return function number. If failure, return negative value. */ +static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux) +{ + int i; + for (i = 0; i < LTQ_MAX_MUX; i++) { + if (mfp->func[i] == mux) + break; + } + if (i >= LTQ_MAX_MUX) + return -EINVAL; + return i; +} + +/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */ +static int match_mfp(const struct ltq_pinmux_info *info, int pin) +{ + int i; + for (i = 0; i < info->num_mfp; i++) { + if (info->mfp[i].pin == pin) + return i; + } + return -1; +} + +/* check whether current pin configuration is valid. Negative for failure */ +static int match_group_mux(const struct ltq_pin_group *grp, + const struct ltq_pinmux_info *info, + unsigned mux) +{ + int i, pin, ret = 0; + for (i = 0; i < grp->npins; i++) { + pin = match_mfp(info, grp->pins[i]); + if (pin < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", + grp->pins[i]); + return -EINVAL; + } + ret = match_mux(&info->mfp[pin], mux); + if (ret < 0) { + dev_err(info->dev, "Can't find mux %d on pin%d\n", + mux, pin); + break; + } + } + return ret; +} + +static int ltq_pmx_enable(struct pinctrl_dev *pctrldev, + unsigned func, + unsigned group) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + const struct ltq_pin_group *pin_grp = &info->grps[group]; + int i, pin, pin_func, ret; + + if (!pin_grp->npins || + (match_group_mux(pin_grp, info, pin_grp->mux) < 0)) { + dev_err(info->dev, "Failed to set the pin group: %s\n", + info->grps[group].name); + return -EINVAL; + } + for (i = 0; i < pin_grp->npins; i++) { + pin = match_mfp(info, pin_grp->pins[i]); + if (pin < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", + pin_grp->pins[i]); + return -EINVAL; + } + pin_func = match_mux(&info->mfp[pin], pin_grp->mux); + ret = info->apply_mux(pctrldev, pin, pin_func); + if (ret) { + dev_err(info->dev, + "failed to apply mux %d for pin %d\n", + pin_func, pin); + return ret; + } + } + return 0; +} + +static void ltq_pmx_disable(struct pinctrl_dev *pctrldev, + unsigned func, + unsigned group) +{ + /* + * Nothing to do here. However, pinconf_check_ops() requires this + * callback to be defined. + */ +} + +static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev, + struct pinctrl_gpio_range *range, + unsigned pin) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int mfp = match_mfp(info, pin + (range->id * 32)); + int pin_func; + + if (mfp < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", pin); + return -EINVAL; + } + + pin_func = match_mux(&info->mfp[mfp], 0); + if (pin_func < 0) { + dev_err(info->dev, "No GPIO function on pin%d\n", mfp); + return -EINVAL; + } + + return info->apply_mux(pctrldev, mfp, pin_func); +} + +static struct pinmux_ops ltq_pmx_ops = { + .get_functions_count = ltq_pmx_func_count, + .get_function_name = ltq_pmx_func_name, + .get_function_groups = ltq_pmx_get_groups, + .enable = ltq_pmx_enable, + .disable = ltq_pmx_disable, + .gpio_request_enable = ltq_pmx_gpio_request_enable, +}; + +/* + * allow different socs to register with the generic part of the lanti + * pinctrl code + */ +int ltq_pinctrl_register(struct platform_device *pdev, + struct ltq_pinmux_info *info) +{ + struct pinctrl_desc *desc; + + if (!info) + return -EINVAL; + desc = info->desc; + desc->pctlops = <q_pctrl_ops; + desc->pmxops = <q_pmx_ops; + info->dev = &pdev->dev; + + info->pctrl = pinctrl_register(desc, &pdev->dev, info); + if (!info->pctrl) { + dev_err(&pdev->dev, "failed to register LTQ pinmux driver\n"); + return -EINVAL; + } + platform_set_drvdata(pdev, info); + return 0; +} diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h new file mode 100644 index 000000000000..4419d32a0ade --- /dev/null +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -0,0 +1,194 @@ +/* + * linux/drivers/pinctrl/pinctrl-lantiq.h + * based on linux/drivers/pinctrl/pinctrl-pxa3xx.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin + */ + +#ifndef __PINCTRL_LANTIQ_H + +#include +#include +#include +#include +#include +#include + +#include "core.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +#define LTQ_MAX_MUX 4 +#define MFPR_FUNC_MASK 0x3 + +#define LTQ_PINCONF_PACK(param, arg) ((param) << 16 | (arg)) +#define LTQ_PINCONF_UNPACK_PARAM(conf) ((conf) >> 16) +#define LTQ_PINCONF_UNPACK_ARG(conf) ((conf) & 0xffff) + +enum ltq_pinconf_param { + LTQ_PINCONF_PARAM_PULL, + LTQ_PINCONF_PARAM_OPEN_DRAIN, + LTQ_PINCONF_PARAM_DRIVE_CURRENT, + LTQ_PINCONF_PARAM_SLEW_RATE, +}; + +struct ltq_cfg_param { + const char *property; + enum ltq_pinconf_param param; +}; + +struct ltq_mfp_pin { + const char *name; + const unsigned int pin; + const unsigned short func[LTQ_MAX_MUX]; +}; + +struct ltq_pin_group { + const char *name; + const unsigned mux; + const unsigned *pins; + const unsigned npins; +}; + +struct ltq_pmx_func { + const char *name; + const char * const *groups; + const unsigned num_groups; +}; + +struct ltq_pinmux_info { + struct device *dev; + struct pinctrl_dev *pctrl; + + /* we need to manage up to 5 pad controllers */ + void __iomem *membase[5]; + + /* the descriptor for the subsystem */ + struct pinctrl_desc *desc; + + /* we expose our pads to the subsystem */ + struct pinctrl_pin_desc *pads; + + /* the number of pads. this varies between socs */ + unsigned int num_pads; + + /* these are our multifunction pins */ + const struct ltq_mfp_pin *mfp; + unsigned int num_mfp; + + /* a number of multifunction pins can be grouped together */ + const struct ltq_pin_group *grps; + unsigned int num_grps; + + /* a mapping between function string and id */ + const struct ltq_pmx_func *funcs; + unsigned int num_funcs; + + /* the pinconf options that we are able to read from the DT */ + const struct ltq_cfg_param *params; + unsigned int num_params; + + /* the pad controller can have a irq mapping */ + const unsigned *exin; + unsigned int num_exin; + + /* we need 5 clocks max */ + struct clk *clk[5]; + + /* soc specific callback used to apply muxing */ + int (*apply_mux)(struct pinctrl_dev *pctrldev, int pin, int mux); +}; + +enum ltq_pin { + GPIO0 = 0, + GPIO1, + GPIO2, + GPIO3, + GPIO4, + GPIO5, + GPIO6, + GPIO7, + GPIO8, + GPIO9, + GPIO10, /* 10 */ + GPIO11, + GPIO12, + GPIO13, + GPIO14, + GPIO15, + GPIO16, + GPIO17, + GPIO18, + GPIO19, + GPIO20, /* 20 */ + GPIO21, + GPIO22, + GPIO23, + GPIO24, + GPIO25, + GPIO26, + GPIO27, + GPIO28, + GPIO29, + GPIO30, /* 30 */ + GPIO31, + GPIO32, + GPIO33, + GPIO34, + GPIO35, + GPIO36, + GPIO37, + GPIO38, + GPIO39, + GPIO40, /* 40 */ + GPIO41, + GPIO42, + GPIO43, + GPIO44, + GPIO45, + GPIO46, + GPIO47, + GPIO48, + GPIO49, + GPIO50, /* 50 */ + GPIO51, + GPIO52, + GPIO53, + GPIO54, + GPIO55, + + GPIO64, + GPIO65, + GPIO66, + GPIO67, + GPIO68, + GPIO69, + GPIO70, + GPIO71, + GPIO72, + GPIO73, + GPIO74, + GPIO75, + GPIO76, + GPIO77, + GPIO78, + GPIO79, + GPIO80, + GPIO81, + GPIO82, + GPIO83, + GPIO84, + GPIO85, + GPIO86, + GPIO87, + GPIO88, +}; + +extern int ltq_pinctrl_register(struct platform_device *pdev, + struct ltq_pinmux_info *info); +extern int ltq_pinctrl_unregister(struct platform_device *pdev); +#endif /* __PINCTRL_PXA3XX_H */ diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c new file mode 100644 index 000000000000..f8d917d40c92 --- /dev/null +++ b/drivers/pinctrl/pinctrl-xway.c @@ -0,0 +1,781 @@ +/* + * linux/drivers/pinctrl/pinmux-xway.c + * based on linux/drivers/pinctrl/pinmux-pxa910.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-lantiq.h" + +#include + +/* we have 3 1/2 banks of 16 bit each */ +#define PINS 16 +#define PORT3 3 +#define PORT(x) (x / PINS) +#define PORT_PIN(x) (x % PINS) + +/* we have 2 mux bits that can be set for each pin */ +#define MUX_ALT0 0x1 +#define MUX_ALT1 0x2 + +/* + * each bank has this offset apart from the 1/2 bank that is mixed into the + * other 3 ranges + */ +#define REG_OFF 0x30 + +/* these are the offsets to our registers */ +#define GPIO_BASE(p) (REG_OFF * PORT(p)) +#define GPIO_OUT(p) GPIO_BASE(p) +#define GPIO_IN(p) (GPIO_BASE(p) + 0x04) +#define GPIO_DIR(p) (GPIO_BASE(p) + 0x08) +#define GPIO_ALT0(p) (GPIO_BASE(p) + 0x0C) +#define GPIO_ALT1(p) (GPIO_BASE(p) + 0x10) +#define GPIO_OD(p) (GPIO_BASE(p) + 0x14) +#define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) +#define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) + +/* the 1/2 port needs special offsets for some registers */ +#define GPIO3_OD (GPIO_BASE(0) + 0x24) +#define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) +#define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) +#define GPIO3_ALT1 (GPIO_BASE(PINS) + 0x24) + +/* macros to help us access the registers */ +#define gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & BIT(p))) +#define gpio_setbit(m, r, p) ltq_w32_mask(0, BIT(p), m + r) +#define gpio_clearbit(m, r, p) ltq_w32_mask(BIT(p), 0, m + r) + +#define MFP_XWAY(a, f0, f1, f2, f3) \ + { \ + .name = #a, \ + .pin = a, \ + .func = { \ + XWAY_MUX_##f0, \ + XWAY_MUX_##f1, \ + XWAY_MUX_##f2, \ + XWAY_MUX_##f3, \ + }, \ + } + +#define GRP_MUX(a, m, p) \ + { .name = a, .mux = XWAY_MUX_##m, .pins = p, .npins = ARRAY_SIZE(p), } + +#define FUNC_MUX(f, m) \ + { .func = f, .mux = XWAY_MUX_##m, } + +#define XWAY_MAX_PIN 32 +#define XR9_MAX_PIN 56 + +enum xway_mux { + XWAY_MUX_GPIO = 0, + XWAY_MUX_SPI, + XWAY_MUX_ASC, + XWAY_MUX_PCI, + XWAY_MUX_CGU, + XWAY_MUX_EBU, + XWAY_MUX_JTAG, + XWAY_MUX_EXIN, + XWAY_MUX_TDM, + XWAY_MUX_STP, + XWAY_MUX_SIN, + XWAY_MUX_GPT, + XWAY_MUX_NMI, + XWAY_MUX_MDIO, + XWAY_MUX_MII, + XWAY_MUX_EPHY, + XWAY_MUX_DFE, + XWAY_MUX_SDIO, + XWAY_MUX_NONE = 0xffff, +}; + +static const struct ltq_mfp_pin xway_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, NONE, NONE), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), + MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, NONE, NONE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, PCI, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, NONE), + MFP_XWAY(GPIO11, GPIO, ASC, PCI, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, NONE, NONE), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, PCI, NONE), + MFP_XWAY(GPIO15, GPIO, SPI, JTAG, NONE), + MFP_XWAY(GPIO16, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO17, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO18, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO19, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO20, GPIO, JTAG, NONE, NONE), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, NONE, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, NONE, TDM), + MFP_XWAY(GPIO27, GPIO, TDM, NONE, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, NONE, NONE), + MFP_XWAY(GPIO29, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO30, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO35, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO36, GPIO, SIN, NONE, EBU), + MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO39, GPIO, EXIN, NONE, NONE), + MFP_XWAY(GPIO40, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO45, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), +}; + +static const struct ltq_mfp_pin ase_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), + MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), + MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), + MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), + MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), + MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), + MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), + MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), + MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), + MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), + MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), + MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), + MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), + MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), + MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), + MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), +}; + +static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; +static const unsigned pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned pins_nmi[] = {GPIO8}; +static const unsigned pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned pins_ebu_a24[] = {GPIO13}; +static const unsigned pins_ebu_clk[] = {GPIO21}; +static const unsigned pins_ebu_cs1[] = {GPIO23}; +static const unsigned pins_ebu_a23[] = {GPIO24}; +static const unsigned pins_ebu_wait[] = {GPIO26}; +static const unsigned pins_ebu_a25[] = {GPIO31}; +static const unsigned pins_ebu_rdy[] = {GPIO48}; +static const unsigned pins_ebu_rd[] = {GPIO49}; + +static const unsigned pins_nand_ale[] = {GPIO13}; +static const unsigned pins_nand_cs1[] = {GPIO23}; +static const unsigned pins_nand_cle[] = {GPIO24}; +static const unsigned pins_nand_rdy[] = {GPIO48}; +static const unsigned pins_nand_rd[] = {GPIO49}; + +static const unsigned pins_exin0[] = {GPIO0}; +static const unsigned pins_exin1[] = {GPIO1}; +static const unsigned pins_exin2[] = {GPIO2}; +static const unsigned pins_exin3[] = {GPIO39}; +static const unsigned pins_exin4[] = {GPIO46}; +static const unsigned pins_exin5[] = {GPIO9}; + +static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; +static const unsigned pins_spi_cs1[] = {GPIO15}; +static const unsigned pins_spi_cs2[] = {GPIO21}; +static const unsigned pins_spi_cs3[] = {GPIO13}; +static const unsigned pins_spi_cs4[] = {GPIO10}; +static const unsigned pins_spi_cs5[] = {GPIO9}; +static const unsigned pins_spi_cs6[] = {GPIO11}; + +static const unsigned pins_gpt1[] = {GPIO28}; +static const unsigned pins_gpt2[] = {GPIO21}; +static const unsigned pins_gpt3[] = {GPIO6}; + +static const unsigned pins_clkout0[] = {GPIO8}; +static const unsigned pins_clkout1[] = {GPIO7}; +static const unsigned pins_clkout2[] = {GPIO3}; +static const unsigned pins_clkout3[] = {GPIO2}; + +static const unsigned pins_pci_gnt1[] = {GPIO30}; +static const unsigned pins_pci_gnt2[] = {GPIO23}; +static const unsigned pins_pci_gnt3[] = {GPIO19}; +static const unsigned pins_pci_gnt4[] = {GPIO38}; +static const unsigned pins_pci_req1[] = {GPIO29}; +static const unsigned pins_pci_req2[] = {GPIO31}; +static const unsigned pins_pci_req3[] = {GPIO3}; +static const unsigned pins_pci_req4[] = {GPIO37}; + +static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; +static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; +static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; +static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; +static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; + +static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; +static const unsigned ase_pins_spi_cs1[] = {GPIO7}; +static const unsigned ase_pins_spi_cs2[] = {GPIO15}; +static const unsigned ase_pins_spi_cs3[] = {GPIO14}; + +static const unsigned ase_pins_exin0[] = {GPIO6}; +static const unsigned ase_pins_exin1[] = {GPIO29}; +static const unsigned ase_pins_exin2[] = {GPIO0}; + +static const unsigned ase_pins_gpt1[] = {GPIO5}; +static const unsigned ase_pins_gpt2[] = {GPIO4}; +static const unsigned ase_pins_gpt3[] = {GPIO25}; + +static const struct ltq_pin_group xway_grps[] = { + GRP_MUX("exin0", EXIN, pins_exin0), + GRP_MUX("exin1", EXIN, pins_exin1), + GRP_MUX("exin2", EXIN, pins_exin2), + GRP_MUX("jtag", JTAG, pins_jtag), + GRP_MUX("ebu a23", EBU, pins_ebu_a23), + GRP_MUX("ebu a24", EBU, pins_ebu_a24), + GRP_MUX("ebu a25", EBU, pins_ebu_a25), + GRP_MUX("ebu clk", EBU, pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, pins_ebu_wait), + GRP_MUX("nand ale", EBU, pins_nand_ale), + GRP_MUX("nand cs1", EBU, pins_nand_cs1), + GRP_MUX("nand cle", EBU, pins_nand_cle), + GRP_MUX("spi", SPI, pins_spi), + GRP_MUX("spi_cs1", SPI, pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, pins_spi_cs6), + GRP_MUX("asc0", ASC, pins_asc0), + GRP_MUX("asc0 cts rts", ASC, pins_asc0_cts_rts), + GRP_MUX("stp", STP, pins_stp), + GRP_MUX("nmi", NMI, pins_nmi), + GRP_MUX("gpt1", GPT, pins_gpt1), + GRP_MUX("gpt2", GPT, pins_gpt2), + GRP_MUX("gpt3", GPT, pins_gpt3), + GRP_MUX("clkout0", CGU, pins_clkout0), + GRP_MUX("clkout1", CGU, pins_clkout1), + GRP_MUX("clkout2", CGU, pins_clkout2), + GRP_MUX("clkout3", CGU, pins_clkout3), + GRP_MUX("gnt1", PCI, pins_pci_gnt1), + GRP_MUX("gnt2", PCI, pins_pci_gnt2), + GRP_MUX("gnt3", PCI, pins_pci_gnt3), + GRP_MUX("req1", PCI, pins_pci_req1), + GRP_MUX("req2", PCI, pins_pci_req2), + GRP_MUX("req3", PCI, pins_pci_req3), +/* xrx only */ + GRP_MUX("nand rdy", EBU, pins_nand_rdy), + GRP_MUX("nand rd", EBU, pins_nand_rd), + GRP_MUX("exin3", EXIN, pins_exin3), + GRP_MUX("exin4", EXIN, pins_exin4), + GRP_MUX("exin5", EXIN, pins_exin5), + GRP_MUX("gnt4", PCI, pins_pci_gnt4), + GRP_MUX("req4", PCI, pins_pci_gnt4), + GRP_MUX("mdio", MDIO, pins_mdio), +}; + +static const struct ltq_pin_group ase_grps[] = { + GRP_MUX("exin0", EXIN, ase_pins_exin0), + GRP_MUX("exin1", EXIN, ase_pins_exin1), + GRP_MUX("exin2", EXIN, ase_pins_exin2), + GRP_MUX("jtag", JTAG, ase_pins_jtag), + GRP_MUX("stp", STP, ase_pins_stp), + GRP_MUX("asc", ASC, ase_pins_asc), + GRP_MUX("gpt1", GPT, ase_pins_gpt1), + GRP_MUX("gpt2", GPT, ase_pins_gpt2), + GRP_MUX("gpt3", GPT, ase_pins_gpt3), + GRP_MUX("ephy", EPHY, ase_pins_ephy), + GRP_MUX("dfe", DFE, ase_pins_dfe), + GRP_MUX("spi", SPI, ase_pins_spi), + GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), +}; + +static const char * const xway_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "req1", + "req2", "req3"}; +static const char * const xway_spi_grps[] = {"spi", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xway_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xway_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle"}; +static const char * const xway_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const xway_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xway_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const xway_jtag_grps[] = {"jtag"}; +static const char * const xway_stp_grps[] = {"stp"}; +static const char * const xway_nmi_grps[] = {"nmi"}; + +/* ar9/vr9/gr9 */ +static const char * const xrx_mdio_grps[] = {"mdio"}; +static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; + +/* ase */ +static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const ase_dfe_grps[] = {"dfe"}; +static const char * const ase_ephy_grps[] = {"ephy"}; +static const char * const ase_asc_grps[] = {"asc"}; +static const char * const ase_jtag_grps[] = {"jtag"}; +static const char * const ase_stp_grps[] = {"stp"}; +static const char * const ase_spi_grps[] = {"spi", "spi_cs1", + "spi_cs2", "spi_cs3"}; + +static const struct ltq_pmx_func danube_funcs[] = { + {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, +}; + +static const struct ltq_pmx_func xrx_funcs[] = { + {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(xrx_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx_mdio_grps)}, +}; + +static const struct ltq_pmx_func ase_funcs[] = { + {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, + {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, + {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, + {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, + {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, + {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, +}; + +/* --------- pinconf related code --------- */ +static int xway_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); + int port = PORT(pin); + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(port); + *config = LTQ_PINCONF_PACK(param, + !!gpio_getbit(info->membase[0], reg, PORT_PIN(port))); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(port); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) { + *config = LTQ_PINCONF_PACK(param, 0); + break; + } + + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(port); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) + *config = LTQ_PINCONF_PACK(param, 2); + else + *config = LTQ_PINCONF_PACK(param, 1); + break; + + default: + dev_err(pctldev->dev, "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + return 0; +} + +static int xway_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); + int arg = LTQ_PINCONF_UNPACK_ARG(config); + int port = PORT(pin); + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(port); + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(port); + if (arg == 0) { + gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + break; + } + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(port); + if (arg == 1) + gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + else if (arg == 2) + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + else + dev_err(pctldev->dev, "Invalid pull value %d\n", arg); + break; + + default: + dev_err(pctldev->dev, "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + return 0; +} + +struct pinconf_ops xway_pinconf_ops = { + .pin_config_get = xway_pinconf_get, + .pin_config_set = xway_pinconf_set, +}; + +static struct pinctrl_desc xway_pctrl_desc = { + .owner = THIS_MODULE, + .confops = &xway_pinconf_ops, +}; + +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, + int pin, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(pin); + u32 alt1_reg = GPIO_ALT1(pin); + + if (port == PORT3) + alt1_reg = GPIO3_ALT1; + + if (mux & MUX_ALT0) + gpio_setbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); + + if (mux & MUX_ALT1) + gpio_setbit(info->membase[0], alt1_reg, PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], alt1_reg, PORT_PIN(pin)); + + return 0; +} + +static const struct ltq_cfg_param xway_cfg_params[] = { + {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, + {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, +}; + +static struct ltq_pinmux_info xway_info = { + .desc = &xway_pctrl_desc, + .apply_mux = xway_mux_apply, + .params = xway_cfg_params, + .num_params = ARRAY_SIZE(xway_cfg_params), +}; + +/* --------- gpio_chip related code --------- */ +static void xway_gpio_set(struct gpio_chip *chip, unsigned int pin, int val) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + if (val) + gpio_setbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); +} + +static int xway_gpio_get(struct gpio_chip *chip, unsigned int pin) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + return gpio_getbit(info->membase[0], GPIO_IN(pin), PORT_PIN(pin)); +} + +static int xway_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + gpio_clearbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + + return 0; +} + +static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + xway_gpio_set(chip, pin, val); + + return 0; +} + +static int xway_gpio_req(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + +static void xway_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + +static struct gpio_chip xway_chip = { + .label = "gpio-xway", + .direction_input = xway_gpio_dir_in, + .direction_output = xway_gpio_dir_out, + .get = xway_gpio_get, + .set = xway_gpio_set, + .request = xway_gpio_req, + .free = xway_gpio_free, + .base = -1, +}; + + +/* --------- register the pinctrl layer --------- */ +static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; +static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; + +static struct pinctrl_xway_soc { + int pin_count; + const struct ltq_mfp_pin *mfp; + const struct ltq_pin_group *grps; + unsigned int num_grps; + const struct ltq_pmx_func *funcs; + unsigned int num_funcs; + const unsigned *exin; + unsigned int num_exin; +} soc_cfg[] = { + /* legacy xway */ + {XWAY_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + danube_funcs, ARRAY_SIZE(danube_funcs), + xway_exin_pin_map, 3}, + /* xway xr9 series */ + {XR9_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + xrx_funcs, ARRAY_SIZE(xrx_funcs), + xway_exin_pin_map, 6}, + /* xway ase series */ + {XWAY_MAX_PIN, ase_mfp, + ase_grps, ARRAY_SIZE(ase_grps), + ase_funcs, ARRAY_SIZE(ase_funcs), + ase_exin_pins_map, 3}, +}; + +static struct pinctrl_gpio_range xway_gpio_range = { + .name = "XWAY GPIO", + .gc = &xway_chip, +}; + +static const struct of_device_id xway_match[] = { + { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, + { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, + { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_match); + +static int __devinit pinmux_xway_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct pinctrl_xway_soc *xway_soc; + struct resource *res; + int ret, i; + + /* get and remap our register range */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get resource\n"); + return -ENOENT; + } + xway_info.membase[0] = devm_request_and_ioremap(&pdev->dev, res); + if (!xway_info.membase[0]) { + dev_err(&pdev->dev, "Failed to remap resource\n"); + return -ENOMEM; + } + + match = of_match_device(xway_match, &pdev->dev); + if (match) + xway_soc = (const struct pinctrl_xway_soc *) match->data; + else + xway_soc = &soc_cfg[0]; + + /* find out how many pads we have */ + xway_chip.ngpio = xway_soc->pin_count; + + /* load our pad descriptors */ + xway_info.pads = devm_kzalloc(&pdev->dev, + sizeof(struct pinctrl_pin_desc) * xway_chip.ngpio, + GFP_KERNEL); + if (!xway_info.pads) { + dev_err(&pdev->dev, "Failed to allocate pads\n"); + return -ENOMEM; + } + for (i = 0; i < xway_chip.ngpio; i++) { + /* strlen("ioXY") + 1 = 5 */ + char *name = devm_kzalloc(&pdev->dev, 5, GFP_KERNEL); + + if (!name) { + dev_err(&pdev->dev, "Failed to allocate pad name\n"); + return -ENOMEM; + } + snprintf(name, 5, "io%d", i); + xway_info.pads[i].number = GPIO0 + i; + xway_info.pads[i].name = name; + } + xway_pctrl_desc.pins = xway_info.pads; + + /* load the gpio chip */ + xway_chip.dev = &pdev->dev; + of_gpiochip_add(&xway_chip); + ret = gpiochip_add(&xway_chip); + if (ret) { + dev_err(&pdev->dev, "Failed to register gpio chip\n"); + return ret; + } + + /* setup the data needed by pinctrl */ + xway_pctrl_desc.name = dev_name(&pdev->dev); + xway_pctrl_desc.npins = xway_chip.ngpio; + + xway_info.num_pads = xway_chip.ngpio; + xway_info.num_mfp = xway_chip.ngpio; + xway_info.mfp = xway_soc->mfp; + xway_info.grps = xway_soc->grps; + xway_info.num_grps = xway_soc->num_grps; + xway_info.funcs = xway_soc->funcs; + xway_info.num_funcs = xway_soc->num_funcs; + xway_info.exin = xway_soc->exin; + xway_info.num_exin = xway_soc->num_exin; + + /* register with the generic lantiq layer */ + ret = ltq_pinctrl_register(pdev, &xway_info); + if (ret) { + dev_err(&pdev->dev, "Failed to register pinctrl driver\n"); + return ret; + } + + /* finish with registering the gpio range in pinctrl */ + xway_gpio_range.npins = xway_chip.ngpio; + xway_gpio_range.base = xway_chip.base; + pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range); + dev_info(&pdev->dev, "Init done\n"); + return 0; +} + +static struct platform_driver pinmux_xway_driver = { + .probe = pinmux_xway_probe, + .driver = { + .name = "pinctrl-xway", + .owner = THIS_MODULE, + .of_match_table = xway_match, + }, +}; + +static int __init pinmux_xway_init(void) +{ + return platform_driver_register(&pinmux_xway_driver); +} + +core_initcall_sync(pinmux_xway_init);