video: Add module.h to drivers/video files who really use it.

They were getting this implicitly by an include of module.h
from device.h -- but we are going to clean that up and break
that include chain, so include module.h explicitly now.

[ with contributions from Axel Lin <axel.lin@gmail.com> ]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drivers/video/atmel_lcdfb.c

@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/backlight.h>
 #include <linux/gfp.h>
+#include <linux/module.h>
 
 #include <mach/board.h>
 #include <mach/cpu.h>

drivers/video/backlight/88pm860x_bl.c

@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/backlight.h>
 #include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
 
 #define MAX_BRIGHTNESS		(0xFF)
 #define MIN_BRIGHTNESS		(0)

drivers/video/backlight/adp5520_bl.c

@@ -13,6 +13,7 @@
 #include <linux/backlight.h>
 #include <linux/mfd/adp5520.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct adp5520_bl {
 	struct device *master;

drivers/video/backlight/ams369fg06.c

@@ -22,6 +22,7 @@
  */
 
 #include <linux/wait.h>
+#include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>

drivers/video/backlight/da903x_bl.c

@@ -19,6 +19,7 @@
 #include <linux/backlight.h>
 #include <linux/mfd/da903x.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DA9030_WLED_CONTROL	0x25
 #define DA9030_WLED_CP_EN	(1 << 6)

drivers/video/backlight/ep93xx_bl.c

@@ -13,6 +13,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>

drivers/video/backlight/l4f00242t03.c

@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/lcd.h>
 #include <linux/slab.h>

drivers/video/backlight/ld9040.c

@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/lcd.h>
 #include <linux/backlight.h>
+#include <linux/module.h>
 
 #include "ld9040_gamma.h"
 

drivers/video/backlight/lms283gf05.c

@@ -17,6 +17,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/lms283gf05.h>
+#include <linux/module.h>
 
 struct lms283gf05_state {
 	struct spi_device	*spi;

drivers/video/backlight/max8925_bl.c

@@ -17,6 +17,7 @@
 #include <linux/backlight.h>
 #include <linux/mfd/max8925.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define MAX_BRIGHTNESS		(0xff)
 #define MIN_BRIGHTNESS		(0)

drivers/video/backlight/s6e63m0.c

@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/lcd.h>
 #include <linux/backlight.h>
+#include <linux/module.h>
 
 #include "s6e63m0_gamma.h"
 

drivers/video/backlight/wm831x_bl.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/slab.h>

drivers/video/carminefb.c

@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "carminefb.h"
 #include "carminefb_regs.h"

drivers/video/cobalt_lcdfb.c

@@ -24,6 +24,7 @@
 #include <linux/ioport.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 
 /*
  * Cursor position address

drivers/video/ep93xx-fb.c

@@ -18,6 +18,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/clk.h>

drivers/video/fb_ddc.c

@@ -1,5 +1,5 @@
 /*
- * driver/vide/fb_ddc.c - DDC/EDID read support.
+ * drivers/video/fb_ddc.c - DDC/EDID read support.
  *
  *  Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
  *
@@ -10,6 +10,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/slab.h>

drivers/video/mb862xx/mb862xxfbdrv.c

@@ -17,6 +17,7 @@
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>

drivers/video/omap/lcd_mipid.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #include <plat/lcd_mipid.h>
 

drivers/video/omap/omapfb_main.c

@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <plat/dma.h>
 

drivers/video/omap2/dss/dsi.c

@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/semaphore.h>
 #include <linux/seq_file.h>
 #include <linux/platform_device.h>

drivers/video/savage/savagefb_accel.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/fb.h>
+#include <linux/module.h>
 
 #include "savagefb.h"
 

drivers/video/sh_mipi_dsi.c

@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/module.h>
 
 #include <video/mipi_display.h>
 #include <video/sh_mipi_dsi.h>

drivers/video/sh_mobile_lcdcfb.c

@@ -23,6 +23,7 @@
 #include <linux/console.h>
 #include <linux/backlight.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mobile_meram.h>
 #include <linux/atomic.h>

drivers/video/w100fb.c

@@ -33,6 +33,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <video/w100fb.h>