Merge branch 'for-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux into usb-next

* 'for-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux:
  usb: PS3 EHCI QH read work-around
  usb: Fix PS3 EHCI suspend
  usb: PS3 EHCI HC reset work-around
  usb: Remove ehci_reset call from ehci_run
This commit is contained in:
Greg Kroah-Hartman 2011-12-09 16:09:49 -08:00
commit 332ceddb8c
8 changed files with 93 additions and 10 deletions

View file

@ -23,6 +23,7 @@ static int au1xxx_ehci_setup(struct usb_hcd *hcd)
int ret = ehci_init(hcd);
ehci->need_io_watchdog = 0;
ehci_reset(ehci);
return ret;
}

View file

@ -48,6 +48,10 @@
#include <asm/system.h>
#include <asm/unaligned.h>
#if defined(CONFIG_PPC_PS3)
#include <asm/firmware.h>
#endif
/*-------------------------------------------------------------------------*/
/*
@ -230,12 +234,58 @@ static int ehci_halt (struct ehci_hcd *ehci)
STS_HALT, STS_HALT, 16 * 125);
}
#if defined(CONFIG_USB_SUSPEND) && defined(CONFIG_PPC_PS3)
/*
* The EHCI controller of the Cell Super Companion Chip used in the
* PS3 will stop the root hub after all root hub ports are suspended.
* When in this condition handshake will return -ETIMEDOUT. The
* STS_HLT bit will not be set, so inspection of the frame index is
* used here to test for the condition. If the condition is found
* return success to allow the USB suspend to complete.
*/
static int handshake_for_broken_root_hub(struct ehci_hcd *ehci,
void __iomem *ptr, u32 mask, u32 done,
int usec)
{
unsigned int old_index;
int error;
if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
return -ETIMEDOUT;
old_index = ehci_read_frame_index(ehci);
error = handshake(ehci, ptr, mask, done, usec);
if (error == -ETIMEDOUT && ehci_read_frame_index(ehci) == old_index)
return 0;
return error;
}
#else
static int handshake_for_broken_root_hub(struct ehci_hcd *ehci,
void __iomem *ptr, u32 mask, u32 done,
int usec)
{
return -ETIMEDOUT;
}
#endif
static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
int error;
error = handshake(ehci, ptr, mask, done, usec);
if (error == -ETIMEDOUT)
error = handshake_for_broken_root_hub(ehci, ptr, mask, done,
usec);
if (error) {
ehci_halt(ehci);
ehci->rh_state = EHCI_RH_HALTED;
@ -620,6 +670,7 @@ static int ehci_init(struct usb_hcd *hcd)
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
ehci->async->qh_state = QH_STATE_LINKED;
@ -677,22 +728,13 @@ static int ehci_init(struct usb_hcd *hcd)
static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int retval;
u32 temp;
u32 hcc_params;
hcd->uses_new_polling = 1;
/* EHCI spec section 4.1 */
/*
* TDI driver does the ehci_reset in their reset callback.
* Don't reset here, because configuration settings will
* vanish.
*/
if (!ehci_is_TDI(ehci) && (retval = ehci_reset(ehci)) != 0) {
ehci_mem_cleanup(ehci);
return retval;
}
ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);

View file

@ -155,6 +155,8 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev)
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
ehci_reset(ehci);
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);

View file

@ -228,6 +228,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
/* cache this readonly data; minimize chip reads */
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_err(dev, "failed to add hcd with err %d\n", ret);

View file

@ -21,6 +21,34 @@
#include <asm/firmware.h>
#include <asm/ps3.h>
static void ps3_ehci_setup_insnreg(struct ehci_hcd *ehci)
{
/* PS3 HC internal setup register offsets. */
enum ps3_ehci_hc_insnreg {
ps3_ehci_hc_insnreg01 = 0x084,
ps3_ehci_hc_insnreg02 = 0x088,
ps3_ehci_hc_insnreg03 = 0x08c,
};
/* PS3 EHCI HC errata fix 316 - The PS3 EHCI HC will reset its
* internal INSNREGXX setup regs back to the chip default values
* on Host Controller Reset (CMD_RESET) or Light Host Controller
* Reset (CMD_LRESET). The work-around for this is for the HC
* driver to re-initialise these regs when ever the HC is reset.
*/
/* Set burst transfer counts to 256 out, 32 in. */
writel_be(0x01000020, (void __iomem *)ehci->regs +
ps3_ehci_hc_insnreg01);
/* Enable burst transfer counts. */
writel_be(0x00000001, (void __iomem *)ehci->regs +
ps3_ehci_hc_insnreg03);
}
static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
{
int result;
@ -49,6 +77,8 @@ static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
ehci_reset(ehci);
ps3_ehci_setup_insnreg(ehci);
return result;
}

View file

@ -134,6 +134,8 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
ehci_reset(ehci);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");

View file

@ -132,6 +132,8 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
ehci_port_power(ehci, 1);
ehci_reset(ehci);
ret = usb_add_hcd(hcd, pdev->resource[1].start,
IRQF_SHARED);
if (ret == 0) {

View file

@ -78,6 +78,8 @@ static int __devinit usb_w90x900_probe(const struct hc_driver *driver,
if (irq < 0)
goto err4;
ehci_reset(ehci);
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval != 0)
goto err4;