[POWERPC] pasemi: clean up mdio_gpio a bit

Misc cleanups of mdio_gpio:
* Better error handling/unrolling in case of init/alloc failures
* Go through child nodes and get their interrupts instead of using
  hardcoded values
* Remap the GPIO registers at module load/driver init instead of during probe
* Coding style and other misc cleanups

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2007-11-04 15:44:15 -06:00
parent 0b47759db5
commit 2dd3c00160

View file

@ -218,45 +218,27 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device *dev = &ofdev->dev;
struct device_node *np = ofdev->node;
struct device_node *gpio_np;
struct device_node *phy_dn, *np = ofdev->node;
struct mii_bus *new_bus;
struct resource res;
struct gpio_priv *priv;
const unsigned int *prop;
int err = 0;
int err;
int i;
gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
if (!gpio_np)
return -ENODEV;
err = of_address_to_resource(gpio_np, 0, &res);
of_node_put(gpio_np);
if (err)
return -EINVAL;
if (!gpio_regs)
gpio_regs = ioremap(res.start, 0x100);
if (!gpio_regs)
return -EPERM;
err = -ENOMEM;
priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
if (!priv)
goto out;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (new_bus == NULL)
return -ENOMEM;
if (!new_bus)
goto out_free_priv;
new_bus->name = "pasemi gpio mdio bus",
new_bus->read = &gpio_mdio_read,
new_bus->write = &gpio_mdio_write,
new_bus->reset = &gpio_mdio_reset,
new_bus->name = "pasemi gpio mdio bus";
new_bus->read = &gpio_mdio_read;
new_bus->write = &gpio_mdio_write;
new_bus->reset = &gpio_mdio_reset;
prop = of_get_property(np, "reg", NULL);
new_bus->id = *prop;
@ -265,9 +247,24 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
new_bus->phy_mask = 0;
new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
for(i = 0; i < PHY_MAX_ADDR; ++i)
new_bus->irq[i] = irq_create_mapping(NULL, 10);
if (!new_bus->irq)
goto out_free_bus;
for (i = 0; i < PHY_MAX_ADDR; i++)
new_bus->irq[i] = NO_IRQ;
for (phy_dn = of_get_next_child(np, NULL);
phy_dn != NULL;
phy_dn = of_get_next_child(np, phy_dn)) {
const unsigned int *ip, *regp;
ip = of_get_property(phy_dn, "interrupts", NULL);
regp = of_get_property(phy_dn, "reg", NULL);
if (!ip || !regp || *regp >= PHY_MAX_ADDR)
continue;
new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
}
prop = of_get_property(np, "mdc-pin", NULL);
priv->mdc_pin = *prop;
@ -280,17 +277,21 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
err = mdiobus_register(new_bus);
if (0 != err) {
if (err != 0) {
printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
new_bus->name, err);
goto bus_register_fail;
goto out_free_irq;
}
return 0;
bus_register_fail:
out_free_irq:
kfree(new_bus->irq);
out_free_bus:
kfree(new_bus);
out_free_priv:
kfree(priv);
out:
return err;
}
@ -330,12 +331,25 @@ static struct of_platform_driver gpio_mdio_driver =
int gpio_mdio_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
if (!np)
return -ENODEV;
gpio_regs = of_iomap(np, 0);
of_node_put(np);
if (!gpio_regs)
return -ENODEV;
return of_register_platform_driver(&gpio_mdio_driver);
}
module_init(gpio_mdio_init);
void gpio_mdio_exit(void)
{
of_unregister_platform_driver(&gpio_mdio_driver);
if (gpio_regs)
iounmap(gpio_regs);
}
device_initcall(gpio_mdio_init);
module_exit(gpio_mdio_exit);