diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S index 848f60e5429b..089c560e07f1 100644 --- a/arch/arm/boot/compressed/head-shark.S +++ b/arch/arm/boot/compressed/head-shark.S @@ -63,8 +63,8 @@ __beginning: mov r4, r0 @ save the entry to the firmware mov pc, r2 -__copy_target: .long 0x08508000 -__copy_end: .long 0x08608000 +__copy_target: .long 0x08507FFC +__copy_end: .long 0x08607FFC .word _start .word __bss_start @@ -73,9 +73,10 @@ __copy_end: .long 0x08608000 __temp_stack: .space 128 __mmu_off: - adr r0, __ofw_data + adr r0, __ofw_data @ read the 1. entry of the memory map ldr r0, [r0, #4] orr r0, r0, #0x00600000 + sub r0, r0, #4 ldr r1, __copy_end ldr r3, __copy_target @@ -89,20 +90,43 @@ __mmu_off: * from 0x08500000 to 0x08508000 if we have only 8MB */ +/* As we get more 2.6-kernels it gets more and more + * uncomfortable to be bound to kernel images of 1MB only. + * So we add a loop here, to be able to copy some more. + * Alexander Schulz 2005-07-17 + */ + + mov r4, #3 @ How many megabytes to copy + + +__MoveCode: sub r4, r4, #1 __Copy: ldr r2, [r0], #-4 str r2, [r1], #-4 teq r1, r3 bne __Copy + + /* The firmware maps us in blocks of 1 MB, the next block is + _below_ the last one. So our decrementing source pointer + ist right here, but the destination pointer must be increased + by 2 MB */ + add r1, r1, #0x00200000 + add r3, r3, #0x00100000 + + teq r4, #0 + bne __MoveCode + + /* and jump to it */ - adr r2, __go_on - adr r0, __ofw_data + adr r2, __go_on @ where we want to jump + adr r0, __ofw_data @ read the 1. entry of the memory map ldr r0, [r0, #4] - sub r2, r2, r0 - sub r2, r2, #0x00500000 - ldr r0, __copy_target + sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00) + sub r2, r2, #0x00500000 @ -0050 + ldr r0, __copy_target @ and add 0850 8000 instead + add r0, r0, #4 add r2, r2, r0 - mov pc, r2 + mov pc, r2 @ and jump there __go_on: adr sp, __temp_stack