clk: rockchip: add clock controller for px30

Add the clock tree definition for the new px30 SoC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

drivers/clk/rockchip/Makefile

@@ -13,6 +13,7 @@ obj-y	+= clk-muxgrf.o
 obj-y	+= clk-ddr.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
+obj-y	+= clk-px30.o
 obj-y	+= clk-rv1108.o
 obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3128.o

drivers/clk/rockchip/clk.h

@@ -34,7 +34,46 @@ struct clk;
 #define HIWORD_UPDATE(val, mask, shift) \
 		((val) << (shift) | (mask) << ((shift) + 16))
 
-/* register positions shared by RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+/* register positions shared by PX30, RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+#define BOOST_PLL_H_CON(x)		((x) * 0x4)
+#define BOOST_CLK_CON			0x0008
+#define BOOST_BOOST_CON			0x000c
+#define BOOST_SWITCH_CNT		0x0010
+#define BOOST_HIGH_PERF_CNT0		0x0014
+#define BOOST_HIGH_PERF_CNT1		0x0018
+#define BOOST_STATIS_THRESHOLD		0x001c
+#define BOOST_SHORT_SWITCH_CNT		0x0020
+#define BOOST_SWITCH_THRESHOLD		0x0024
+#define BOOST_FSM_STATUS		0x0028
+#define BOOST_PLL_L_CON(x)		((x) * 0x4 + 0x2c)
+#define BOOST_RECOVERY_MASK		0x1
+#define BOOST_RECOVERY_SHIFT		1
+#define BOOST_SW_CTRL_MASK		0x1
+#define BOOST_SW_CTRL_SHIFT		2
+#define BOOST_LOW_FREQ_EN_MASK		0x1
+#define BOOST_LOW_FREQ_EN_SHIFT		3
+#define BOOST_BUSY_STATE		BIT(8)
+
+#define PX30_PLL_CON(x)			((x) * 0x4)
+#define PX30_CLKSEL_CON(x)		((x) * 0x4 + 0x100)
+#define PX30_CLKGATE_CON(x)		((x) * 0x4 + 0x200)
+#define PX30_GLB_SRST_FST		0xb8
+#define PX30_GLB_SRST_SND		0xbc
+#define PX30_SOFTRST_CON(x)		((x) * 0x4 + 0x300)
+#define PX30_MODE_CON			0xa0
+#define PX30_MISC_CON			0xa4
+#define PX30_SDMMC_CON0			0x380
+#define PX30_SDMMC_CON1			0x384
+#define PX30_SDIO_CON0			0x388
+#define PX30_SDIO_CON1			0x38c
+#define PX30_EMMC_CON0			0x390
+#define PX30_EMMC_CON1			0x394
+
+#define PX30_PMU_PLL_CON(x)		((x) * 0x4)
+#define PX30_PMU_CLKSEL_CON(x)		((x) * 0x4 + 0x40)
+#define PX30_PMU_CLKGATE_CON(x)		((x) * 0x4 + 0x80)
+#define PX30_PMU_MODE			0x0020
+
 #define RV1108_PLL_CON(x)		((x) * 0x4)
 #define RV1108_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
 #define RV1108_CLKGATE_CON(x)		((x) * 0x4 + 0x120)