From 208c70a45624400fafd7511b96bc426bf01f8f5e Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 14 Feb 2008 15:58:47 -0500 Subject: [PATCH 01/26] ACPI: EC: Use proper handle for boot EC Fall back to ACPI_ROOT_HANDLE only in case of error. ACPI: EC: EC description table is found, configuring boot EC ACPI Error (evregion-0316): No handler for Region [ECOR] (ffff81007a651620) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] http://bugzilla.kernel.org/show_bug.cgi?id=9916 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 7222a18a0319..caf873c14bfb 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -943,7 +943,11 @@ int __init acpi_ec_ecdt_probe(void) boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; - boot_ec->handle = ACPI_ROOT_OBJECT; + if (ACPI_FAILURE(acpi_get_handle(NULL, ecdt_ptr->id, + &boot_ec->handle))) { + pr_info("Failed to locate handle for boot EC\n"); + boot_ec->handle = ACPI_ROOT_OBJECT; + } } else { /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ From 5958f1a4da39581074bab50cabd0a582e651b90f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 3 Feb 2008 15:06:25 -0800 Subject: [PATCH 02/26] kernel-doc: fix pci-acpi warning Fix PCI kernel-doc warning: Warning(linux-2.6.24-git12//drivers/pci/pci-acpi.c:166): No description found for parameter 'hid' Signed-off-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index e569645d59e2..2f2d308c9aa3 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -158,6 +158,7 @@ acpi_run_osc ( /** * __pci_osc_support_set - register OS support to Firmware * @flags: OS support bits + * @hid: hardware ID * * Update OS support fields and doing a _OSC Query to obtain an update * from Firmware on supported control bits. From c751670902c3dd9abbed279170a832e6a1e6cf94 Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 15 Feb 2008 00:58:50 -0500 Subject: [PATCH 03/26] thermal: validate input parameters Added sanity check to make sure that thermal zone and cooling device exists. Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/thermal/thermal.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c index e782b3e7fcdb..5f1d318f0574 100644 --- a/drivers/thermal/thermal.c +++ b/drivers/thermal/thermal.c @@ -306,12 +306,23 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, { struct thermal_cooling_device_instance *dev; struct thermal_cooling_device_instance *pos; + struct thermal_zone_device *pos1; + struct thermal_cooling_device *pos2; int result; if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) return -EINVAL; - if (!tz || !cdev) + list_for_each_entry(pos1, &thermal_tz_list, node) { + if (pos1 == tz) + break; + } + list_for_each_entry(pos2, &thermal_cdev_list, node) { + if (pos2 == cdev) + break; + } + + if (tz != pos1 || cdev != pos2) return -EINVAL; dev = From 3e6fda5c1159823fc02463eceb564c8bfc0e7a0e Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 15 Feb 2008 00:59:50 -0500 Subject: [PATCH 04/26] thermal: use ERR_PTR for returning error Need to return using ERR_PTR instead of NULL in case of errors. Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/thermal/thermal.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c index 5f1d318f0574..8b86e53ccf7a 100644 --- a/drivers/thermal/thermal.c +++ b/drivers/thermal/thermal.c @@ -448,20 +448,20 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, int result; if (strlen(type) >= THERMAL_NAME_LENGTH) - return NULL; + return ERR_PTR(-EINVAL); if (!ops || !ops->get_max_state || !ops->get_cur_state || !ops->set_cur_state) - return NULL; + return ERR_PTR(-EINVAL); cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL); if (!cdev) - return NULL; + return ERR_PTR(-ENOMEM); result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id); if (result) { kfree(cdev); - return NULL; + return ERR_PTR(result); } strcpy(cdev->type, type); @@ -473,7 +473,7 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, if (result) { release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); kfree(cdev); - return NULL; + return ERR_PTR(result); } /* sys I/F */ @@ -509,7 +509,7 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); - return NULL; + return ERR_PTR(result); } EXPORT_SYMBOL(thermal_cooling_device_register); @@ -581,17 +581,17 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, int count; if (strlen(type) >= THERMAL_NAME_LENGTH) - return NULL; + return ERR_PTR(-EINVAL); if (trips > THERMAL_MAX_TRIPS || trips < 0) - return NULL; + return ERR_PTR(-EINVAL); if (!ops || !ops->get_temp) - return NULL; + return ERR_PTR(-EINVAL); tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL); if (!tz) - return NULL; + return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&tz->cooling_devices); idr_init(&tz->idr); @@ -599,7 +599,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id); if (result) { kfree(tz); - return NULL; + return ERR_PTR(result); } strcpy(tz->type, type); @@ -612,7 +612,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (result) { release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); kfree(tz); - return NULL; + return ERR_PTR(result); } /* sys I/F */ @@ -654,7 +654,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); device_unregister(&tz->device); - return NULL; + return ERR_PTR(result); } EXPORT_SYMBOL(thermal_zone_device_register); From 19b36780ee7ddeb5080e3f1f858a83c4824f1fdc Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 15 Feb 2008 01:01:52 -0500 Subject: [PATCH 05/26] ACPI fan: extract return values using PTR_ERR Need to extract errors using PTR_ERR macro and process accordingly. thermal_cooling_device_register returning NULL means that CONFIG_THERMAL=n and in that case no need to create symbolic links. Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/fan.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 48cb705b274a..c8e3cba423ef 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -256,22 +256,28 @@ static int acpi_fan_add(struct acpi_device *device) cdev = thermal_cooling_device_register("Fan", device, &fan_cooling_ops); - if (cdev) + if (IS_ERR(cdev)) { + result = PTR_ERR(cdev); + goto end; + } + if (cdev) { printk(KERN_INFO PREFIX "%s is registered as cooling_device%d\n", device->dev.bus_id, cdev->id); - else - goto end; - acpi_driver_data(device) = cdev; - result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj, - "thermal_cooling"); - if (result) - return result; - result = sysfs_create_link(&cdev->device.kobj, &device->dev.kobj, - "device"); - if (result) - return result; + acpi_driver_data(device) = cdev; + result = sysfs_create_link(&device->dev.kobj, + &cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + + result = sysfs_create_link(&cdev->device.kobj, + &device->dev.kobj, + "device"); + if (result) + return result; + } result = acpi_fan_add_fs(device); if (result) From f28bb45e2863173a7464d98907677e903f42c68b Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 15 Feb 2008 08:34:37 +0800 Subject: [PATCH 06/26] ACPI: thermal: Check whether cooling device exists before unregistering OS should check whether the cooling device exists before it is unregistered. If it doesn't exists, it is unnecessary to remove the sysfs link and call the function of thermal_cooling_device_unregister. http://bugzilla.kernel.org/show_bug.cgi?id=9982 Signed-off-by: Zhao Yakui Tested-by : Dhaval Giani Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 75ccf5d18bf4..697335c8423e 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -809,10 +809,12 @@ static int acpi_processor_remove(struct acpi_device *device, int type) acpi_processor_remove_fs(device); - sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); - sysfs_remove_link(&pr->cdev->device.kobj, "device"); - thermal_cooling_device_unregister(pr->cdev); - pr->cdev = NULL; + if (pr->cdev) { + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + thermal_cooling_device_unregister(pr->cdev); + pr->cdev = NULL; + } processors[pr->id] = NULL; From d76628c67cdeebf84766a19c67c821c2e518baa4 Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 15 Feb 2008 18:26:54 -0500 Subject: [PATCH 07/26] ACPI thermal: extract return values using PTR_ERR Need to extract errors using PTR_ERR macro and process accordingly.thermal_cooling_device_register returning NULL means that CONFIG_THERMAL=n and in that case no need to create symbolic links. Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 37 +++++++++++++++++++++-------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 75ccf5d18bf4..b02006951cd0 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -670,21 +670,26 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr->cdev = thermal_cooling_device_register("Processor", device, &processor_cooling_ops); - if (pr->cdev) + if (IS_ERR(pr->cdev)) { + result = PTR_ERR(pr->cdev); + goto end; + } + if (pr->cdev) { printk(KERN_INFO PREFIX "%s is registered as cooling_device%d\n", device->dev.bus_id, pr->cdev->id); - else - goto end; - result = sysfs_create_link(&device->dev.kobj, &pr->cdev->device.kobj, - "thermal_cooling"); - if (result) - return result; - result = sysfs_create_link(&pr->cdev->device.kobj, &device->dev.kobj, - "device"); - if (result) - return result; + result = sysfs_create_link(&device->dev.kobj, + &pr->cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + result = sysfs_create_link(&pr->cdev->device.kobj, + &device->dev.kobj, + "device"); + if (result) + return result; + } if (pr->flags.throttling) { printk(KERN_INFO PREFIX "%s [%s] (supports", @@ -809,10 +814,12 @@ static int acpi_processor_remove(struct acpi_device *device, int type) acpi_processor_remove_fs(device); - sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); - sysfs_remove_link(&pr->cdev->device.kobj, "device"); - thermal_cooling_device_unregister(pr->cdev); - pr->cdev = NULL; + if (pr->cdev) { + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + thermal_cooling_device_unregister(pr->cdev); + pr->cdev = NULL; + } processors[pr->id] = NULL; From 43ff39f2f6450fa2e9a566f8bf007a26d76f2c9d Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 15 Feb 2008 18:29:18 -0500 Subject: [PATCH 08/26] ACPI video: check for error from thermal_cooling_device_register Need to check whether thermal_cooling_device_register returned ERROR or not. Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/video.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 7f714fa2a454..12cce69b5441 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -731,6 +731,9 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cdev = thermal_cooling_device_register("LCD", device->dev, &video_cooling_ops); + if (IS_ERR(device->cdev)) + return; + if (device->cdev) { printk(KERN_INFO PREFIX "%s is registered as cooling_device%d\n", From 69f6b8dd6b94ac594b6920b4530a3390fb1d3fd6 Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 15 Feb 2008 01:05:23 -0500 Subject: [PATCH 09/26] intel_menlo: extract return values using PTR_ERR Need to extract errors using PTR_ERR macro and process accordingly.thermal_cooling_device_register returning NULL means that CONFIG_THERMAL=n and in that case no need to create symbolic links. Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/misc/intel_menlow.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index f70984ab1e1b..de16e88eb8d3 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -170,10 +170,13 @@ static int intel_menlow_memory_add(struct acpi_device *device) cdev = thermal_cooling_device_register("Memory controller", device, &memory_cooling_ops); - acpi_driver_data(device) = cdev; - if (!cdev) - result = -ENODEV; - else { + if (IS_ERR(cdev)) { + result = PTR_ERR(cdev); + goto end; + } + + if (cdev) { + acpi_driver_data(device) = cdev; result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj, "thermal_cooling"); if (result) From cbb14842137ff78df10038da8ca8a97917a5a926 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:50 -0200 Subject: [PATCH 10/26] ACPI: thinkpad-acpi: trivial fix to module_desc typo Thanks to Damjan for noticing this one. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index e2c7edd206a6..723d37b9e6a2 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -5918,7 +5918,7 @@ MODULE_PARM_DESC(hotkey_report_mode, #define TPACPI_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ - MODULE_PARM_DESC(feature, "Simulates thinkpad-aci procfs command " \ + MODULE_PARM_DESC(feature, "Simulates thinkpad-acpi procfs command " \ "at module load, see documentation") TPACPI_PARAM(hotkey); From 5f24927f48c63e79ff8e286fc8530f4525b4182a Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:51 -0200 Subject: [PATCH 11/26] ACPI: thinkpad-acpi: trivial fix to documentation Fix a stray ibm-acpi that should have been replaced with thinkpad-acpi. Thanks to Damjan for noticing this one. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 6c2477754a2a..33d6e5afcca6 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1309,7 +1309,7 @@ Enabling debugging output The module takes a debug parameter which can be used to selectively enable various classes of debugging output, for example: - modprobe ibm_acpi debug=0xffff + modprobe thinkpad_acpi debug=0xffff will enable all debugging output classes. It takes a bitmask, so to enable more than one output class, just add their values. From 1bc6b9cdd5e608f0b7e6160a823c9dcd51820410 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:52 -0200 Subject: [PATCH 12/26] ACPI: thinkpad-acpi: always track input device open/close The open() and close() hooks for the input device are useful even when hotkey NVRAM polling support is not in use, so it is better to always have them around. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 723d37b9e6a2..6da3f40ac9f6 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1417,6 +1417,14 @@ static void hotkey_poll_setup_safe(int may_warn) mutex_unlock(&hotkey_mutex); } +#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + +static void hotkey_poll_setup_safe(int __unused) +{ +} + +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + static int hotkey_inputdev_open(struct input_dev *dev) { switch (tpacpi_lifecycle) { @@ -1444,7 +1452,6 @@ static void hotkey_inputdev_close(struct input_dev *dev) if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING) hotkey_poll_setup_safe(0); } -#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ /* sysfs hotkey enable ------------------------------------------------- */ static ssize_t hotkey_enable_show(struct device *dev, @@ -2023,12 +2030,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) (hotkey_report_mode < 2) ? "enabled" : "disabled"); -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL tpacpi_inputdev->open = &hotkey_inputdev_open; tpacpi_inputdev->close = &hotkey_inputdev_close; hotkey_poll_setup_safe(1); -#endif } return (tp_features.hotkey)? 0 : 1; @@ -2221,9 +2226,7 @@ static void hotkey_resume(void) hotkey_radio_sw_notify_change(); hotkey_wakeup_reason_notify_change(); hotkey_wakeup_hotunplug_complete_notify_change(); -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL hotkey_poll_setup_safe(0); -#endif } /* procfs -------------------------------------------------------------- */ From 7526696a013f33d4926fdc080c26fe6af07ba30f Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:53 -0200 Subject: [PATCH 13/26] ACPI: thinkpad-acpi: synchronize input device switches Issue EV_SW events at module init time to synchronize the input device with the current state of the switch, otherwise we might lose the first event. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 6da3f40ac9f6..02f946516584 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -2034,6 +2034,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) tpacpi_inputdev->close = &hotkey_inputdev_close; hotkey_poll_setup_safe(1); + tpacpi_input_send_radiosw(); } return (tp_features.hotkey)? 0 : 1; From d7c1d17dfed996e84212fc1ce617b2586dd70ec2 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:54 -0200 Subject: [PATCH 14/26] ACPI: thinkpad-acpi: make the video output feature optional The video output port control feature is not very useful on many ThinkPads (especially when a X server is running), and lately userspace is getting better and better at it, so it makes sense to allow users to stripe out the thinkpad-acpi video feature from their kernels and save at least 2KB. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/Kconfig | 17 +++++++++++++++++ drivers/misc/thinkpad_acpi.c | 20 +++++++++++++------- 2 files changed, 30 insertions(+), 7 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1abc95ca9dfa..982e27b86d10 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -258,6 +258,23 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. +config THINKPAD_ACPI_VIDEO + bool "Video output control support" + depends on THINKPAD_ACPI + default y + ---help--- + Allows the thinkpad_acpi driver to provide an interface to control + the various video output ports. + + This feature often won't work well, depending on ThinkPad model, + display state, video output devices in use, whether there is a X + server running, phase of the moon, and the current mood of + Schroedinger's cat. If you can use X.org's RandR to control + your ThinkPad's video output ports instead of this feature, + don't think twice: do it and say N here to save some memory. + + If you are not sure, say Y here. + config THINKPAD_ACPI_HOTKEY_POLL bool "Suport NVRAM polling for hot keys" depends on THINKPAD_ACPI diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 02f946516584..4ea3866ddf90 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -301,6 +301,13 @@ TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "HKEY", /* all others */ ); /* 570 */ +TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + /************************************************************************* * ACPI helpers @@ -2680,6 +2687,8 @@ static struct ibm_struct wan_driver_data = { * Video subdriver */ +#ifdef CONFIG_THINKPAD_ACPI_VIDEO + enum video_access_mode { TPACPI_VIDEO_NONE = 0, TPACPI_VIDEO_570, /* 570 */ @@ -2707,13 +2716,6 @@ static int video_orig_autosw; static int video_autosw_get(void); static int video_autosw_set(int enable); -TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ - TPACPI_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ static int __init video_init(struct ibm_init_struct *iibm) @@ -3023,6 +3025,8 @@ static struct ibm_struct video_driver_data = { .exit = video_exit, }; +#endif /* CONFIG_THINKPAD_ACPI_VIDEO */ + /************************************************************************* * Light (thinklight) subdriver */ @@ -5807,10 +5811,12 @@ static struct ibm_init_struct ibms_init[] __initdata = { .init = wan_init, .data = &wan_driver_data, }, +#ifdef CONFIG_THINKPAD_ACPI_VIDEO { .init = video_init, .data = &video_driver_data, }, +#endif { .init = light_init, .data = &light_driver_data, From b3ec6f911a681f38e4630ef8bf20b3d3cb0f63c2 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:55 -0200 Subject: [PATCH 15/26] ACPI: thinkpad-acpi: issue input events for tablet swivel events Issue EV_SW SW_TABLET_MODE events for HKEY events 0x5009 and 0x500A on the X41t/X60t/X61t. As usual, we suppress the HKEY events on the netlink interface to avoid sending duplicate events to userspace. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 4 ++-- drivers/misc/thinkpad_acpi.c | 22 ++++++++++++++++++++-- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 33d6e5afcca6..0ae5708ea0ad 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -491,6 +491,8 @@ generate input device EV_KEY events. Non hot-key ACPI HKEY event map: 0x5001 Lid closed 0x5002 Lid opened +0x5009 Tablet swivel: switched to tablet mode +0x500A Tablet swivel: switched to normal mode 0x7000 Radio Switch may have changed state The above events are not propagated by the driver, except for legacy @@ -505,8 +507,6 @@ The above events are never propagated by the driver. 0x3003 Bay ejection (see 0x2x05) complete, can sleep again 0x4003 Undocked (see 0x2x04), can sleep again -0x5009 Tablet swivel: switched to tablet mode -0x500A Tablet swivel: switched to normal mode 0x500B Tablet pen insterted into its storage bay 0x500C Tablet pen removed from its storage bay 0x5010 Brightness level changed (newer Lenovo BIOSes) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 4ea3866ddf90..35483502a117 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1172,6 +1172,17 @@ static void tpacpi_input_send_radiosw(void) mutex_unlock(&tpacpi_inputdev_send_mutex); } +static void tpacpi_input_send_tabletsw(unsigned int state) +{ + mutex_lock(&tpacpi_inputdev_send_mutex); + + input_report_switch(tpacpi_inputdev, + SW_TABLET_MODE, !!state); + input_sync(tpacpi_inputdev); + + mutex_unlock(&tpacpi_inputdev_send_mutex); +} + static void tpacpi_input_send_key(unsigned int scancode) { unsigned int keycode; @@ -2020,6 +2031,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(EV_SW, tpacpi_inputdev->evbit); set_bit(SW_RADIO, tpacpi_inputdev->swbit); } + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + } dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); @@ -2169,11 +2184,14 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* 0x5000-0x5FFF: human interface helpers */ switch (hkey) { case 0x5010: /* Lenovo new BIOS: brightness changed */ - case 0x5009: /* X61t: swivel up (tablet mode) */ - case 0x500a: /* X61t: swivel down (normal mode) */ case 0x500b: /* X61t: tablet pen inserted into bay */ case 0x500c: /* X61t: tablet pen removed from bay */ break; + case 0x5009: /* X61t: swivel up (tablet mode) */ + case 0x500a: /* X61t: swivel down (normal mode) */ + tpacpi_input_send_tabletsw((hkey == 0x5009)); + send_acpi_ev = 0; + break; case 0x5001: case 0x5002: /* LID switch events. Do not propagate */ From d0788cfbae0eddf13d5f2591acb1b407ba041d71 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:56 -0200 Subject: [PATCH 16/26] ACPI: thinkpad-acpi: improve thinkpad-acpi input device documentation Fix a few spelling errors, and also document the EV_SW events thinkpad-acpi can issue. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 48 ++++++++++++++----------- 1 file changed, 27 insertions(+), 21 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 0ae5708ea0ad..91f688c30185 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -160,7 +160,7 @@ Hot keys procfs: /proc/acpi/ibm/hotkey sysfs device attribute: hotkey_* -In a ThinkPad, the ACPI HKEY handler is responsible for comunicating +In a ThinkPad, the ACPI HKEY handler is responsible for communicating some important events and also keyboard hot key presses to the operating system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad @@ -193,7 +193,7 @@ Not all bits in the mask can be modified. Not all bits that can be modified do anything. Not all hot keys can be individually controlled by the mask. Some models do not support the mask at all, and in those models, hot keys cannot be controlled individually. The behaviour of -the mask is, therefore, higly dependent on the ThinkPad model. +the mask is, therefore, highly dependent on the ThinkPad model. Note that unmasking some keys prevents their default behavior. For example, if Fn+F5 is unmasked, that key will no longer enable/disable @@ -288,7 +288,7 @@ sysfs notes: in ACPI event mode, volume up/down/mute are reported as separate events, but this behaviour may be corrected in future releases of this driver, in which case the - ThinkPad volume mixer user interface semanthics will be + ThinkPad volume mixer user interface semantics will be enforced. hotkey_poll_freq: @@ -308,7 +308,7 @@ sysfs notes: hotkey_radio_sw: if the ThinkPad has a hardware radio switch, this attribute will read 0 if the switch is in the "radios - disabled" postition, and 1 if the switch is in the + disabled" position, and 1 if the switch is in the "radios enabled" position. This attribute has poll()/select() support. @@ -339,7 +339,7 @@ sysfs notes: wakeup_hotunplug_complete: Set to 1 if the system was waken up because of an undock or bay ejection request, and that request - was sucessfully completed. At this point, it might + was successfully completed. At this point, it might be useful to send the system back to sleep, at the user's choice. Refer to HKEY events 0x4003 and 0x3003, below. @@ -392,7 +392,7 @@ event code Key Notes Lenovo: battery 0x1004 0x03 FN+F4 Sleep button (ACPI sleep button - semanthics, i.e. sleep-to-RAM). + semantics, i.e. sleep-to-RAM). It is always generate some kind of event, either the hot key event or a ACPI sleep button @@ -403,12 +403,12 @@ event code Key Notes time passes. 0x1005 0x04 FN+F5 Radio. Enables/disables - the internal BlueTooth hardware + the internal Bluetooth hardware and W-WAN card if left in control of the firmware. Does not affect the WLAN card. Should be used to turn on/off all - radios (bluetooth+W-WAN+WLAN), + radios (Bluetooth+W-WAN+WLAN), really. 0x1006 0x05 FN+F6 - @@ -417,7 +417,7 @@ event code Key Notes Do you feel lucky today? 0x1008 0x07 FN+F8 IBM: toggle screen expand - Lenovo: configure ultranav + Lenovo: configure UltraNav 0x1009 0x08 FN+F9 - .. .. .. @@ -447,7 +447,7 @@ event code Key Notes 0x1011 0x10 FN+END Brightness down. See brightness up for details. -0x1012 0x11 FN+PGUP Thinklight toggle. This key is +0x1012 0x11 FN+PGUP ThinkLight toggle. This key is always handled by the firmware, even when unmasked. @@ -469,7 +469,7 @@ event code Key Notes key is always handled by the firmware, even when unmasked. -0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key +0x1018 0x17 THINKPAD ThinkPad/Access IBM/Lenovo key 0x1019 0x18 unknown .. .. .. @@ -488,6 +488,12 @@ If a key is mapped to KEY_UNKNOWN, it generates an input event that includes an scan code. If a key is mapped to anything else, it will generate input device EV_KEY events. +In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW +events for switches: + +SW_RADIO T60 and later hardare rfkill rocker switch +SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A + Non hot-key ACPI HKEY event map: 0x5001 Lid closed 0x5002 Lid opened @@ -507,7 +513,7 @@ The above events are never propagated by the driver. 0x3003 Bay ejection (see 0x2x05) complete, can sleep again 0x4003 Undocked (see 0x2x04), can sleep again -0x500B Tablet pen insterted into its storage bay +0x500B Tablet pen inserted into its storage bay 0x500C Tablet pen removed from its storage bay 0x5010 Brightness level changed (newer Lenovo BIOSes) @@ -539,7 +545,7 @@ sysfs (it is read-only). If the hotkey_report_mode module parameter is set to 1 or 2, it cannot be changed later through sysfs (any writes will return -EPERM to signal that hotkey_report_mode was locked. On 2.6.23 and later, where -hotkey_report_mode cannot be changed at all, writes will return -EACES). +hotkey_report_mode cannot be changed at all, writes will return -EACCES). hotkey_report_mode set to 1 makes the driver export through the procfs ACPI event interface all hot key presses (which are *also* sent to the @@ -584,7 +590,7 @@ Sysfs notes: 0: disables Bluetooth / Bluetooth is disabled 1: enables Bluetooth / Bluetooth is enabled. - Note: this interface will be probably be superseeded by the + Note: this interface will be probably be superseded by the generic rfkill class, so it is NOT to be considered stable yet. Video output control -- /proc/acpi/ibm/video @@ -791,12 +797,12 @@ on the X40 (tpb is the ThinkPad Buttons utility): 1 - Related to "Volume up" key press 2 - Related to "Mute on" key press 3 - Related to "Access IBM" key press - 4 - Related to "LCD brightness up" key pess + 4 - Related to "LCD brightness up" key press 5 - Related to "LCD brightness down" key press 11 - Related to "toggle screen expansion" key press/function 12 - Related to "ThinkLight on" 13 - Related to "ThinkLight off" - 14 - Related to "ThinkLight" key press (toggle thinklight) + 14 - Related to "ThinkLight" key press (toggle ThinkLight) The cmos command interface is prone to firmware split-brain problems, as in newer ThinkPads it is just a compatibility layer. Do not use it, it is @@ -1024,7 +1030,7 @@ There are two interfaces to the firmware for direct brightness control, EC and CMOS. To select which one should be used, use the brightness_mode module parameter: brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC -and CMOS. The driver tries to autodetect which interface to use. +and CMOS. The driver tries to auto-detect which interface to use. When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct @@ -1266,8 +1272,8 @@ experimental=1 parameter when loading the module. This feature shows the presence and current state of a W-WAN (Sierra Wireless EV-DO) device. -It was tested on a Lenovo Thinkpad X60. It should probably work on other -Thinkpad models which come with this module installed. +It was tested on a Lenovo ThinkPad X60. It should probably work on other +ThinkPad models which come with this module installed. Procfs notes: @@ -1286,7 +1292,7 @@ Sysfs notes: 0: disables WWAN card / WWAN card is disabled 1: enables WWAN card / WWAN card is enabled. - Note: this interface will be probably be superseeded by the + Note: this interface will be probably be superseded by the generic rfkill class, so it is NOT to be considered stable yet. Multiple Commands, Module Parameters @@ -1356,7 +1362,7 @@ Sysfs interface changelog: NVRAM is compiled out by the user because it is unneeded/undesired in the first place). 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling - and proper hotkey_mask semanthics (version 8 of the + and proper hotkey_mask semantics (version 8 of the NVRAM polling patch). Some development snapshots of 0.18 had an earlier version that did strange things to hotkey_mask. From d147da73c9a3f617e4685c6a7762961fe19833e7 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:57 -0200 Subject: [PATCH 17/26] ACPI: thinkpad-acpi: minor hotkey_radio_sw fixes Fixes some minor points in the radio switch code and docs. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 2 +- drivers/misc/thinkpad_acpi.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 91f688c30185..606af1628382 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -306,7 +306,7 @@ sysfs notes: The recommended polling frequency is 10Hz. hotkey_radio_sw: - if the ThinkPad has a hardware radio switch, this + If the ThinkPad has a hardware radio switch, this attribute will read 0 if the switch is in the "radios disabled" position, and 1 if the switch is in the "radios enabled" position. diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 35483502a117..c119cf23e1ff 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1161,15 +1161,15 @@ static void tpacpi_input_send_radiosw(void) { int wlsw; - mutex_lock(&tpacpi_inputdev_send_mutex); - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) { + mutex_lock(&tpacpi_inputdev_send_mutex); + input_report_switch(tpacpi_inputdev, SW_RADIO, !!wlsw); input_sync(tpacpi_inputdev); - } - mutex_unlock(&tpacpi_inputdev_send_mutex); + mutex_unlock(&tpacpi_inputdev_send_mutex); + } } static void tpacpi_input_send_tabletsw(unsigned int state) From 6c231bd5eb07ce546517019f334652b9ecfc329a Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 16 Feb 2008 02:17:58 -0200 Subject: [PATCH 18/26] ACPI: thinkpad-acpi: add tablet-mode reporting A quick study of the 0x5009/0x500A HKEY event on the X61t DSDT revealed the existence of the EC HTAB register (EC 0x0f, bit 7), and a compare with the X41t DSDT shows that HKEY.MHKG can be used to verify if the ThinkPad is tablet-capable (MHKG present), and in tablet mode (bit 3 of MHKG return is set). Add an attribute to report this information, "hotkey_tablet_mode". This attribute has poll()/select() support, and can be used along with EV_SW SW_TABLET_MODE to hook userspace to tablet events. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 7 +++ drivers/misc/thinkpad_acpi.c | 79 +++++++++++++++++++++---- 2 files changed, 75 insertions(+), 11 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 606af1628382..76cb428435da 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -313,6 +313,13 @@ sysfs notes: This attribute has poll()/select() support. + hotkey_tablet_mode: + If the ThinkPad has tablet capabilities, this attribute + will read 0 if the ThinkPad is in normal mode, and + 1 if the ThinkPad is in tablet mode. + + This attribute has poll()/select() support. + hotkey_report_mode: Returns the state of the procfs ACPI event report mode filter for hot keys. If it is set to 1 (the default), diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index c119cf23e1ff..bb269d0c677e 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -221,6 +221,7 @@ static struct { u32 hotkey:1; u32 hotkey_mask:1; u32 hotkey_wlsw:1; + u32 hotkey_tablet:1; u32 light:1; u32 light_status:1; u32 bright_16levels:1; @@ -1060,6 +1061,9 @@ static struct attribute_set *hotkey_dev_attributes; #define HOTKEY_CONFIG_CRITICAL_END #endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ +/* HKEY.MHKG() return bits */ +#define TP_HOTKEY_TABLET_MASK (1 << 3) + static int hotkey_get_wlsw(int *status) { if (!acpi_evalf(hkey_handle, status, "WLSW", "d")) @@ -1067,6 +1071,16 @@ static int hotkey_get_wlsw(int *status) return 0; } +static int hotkey_get_tablet_mode(int *status) +{ + int s; + + if (!acpi_evalf(hkey_handle, &s, "MHKG", "d")) + return -EIO; + + return ((s & TP_HOTKEY_TABLET_MASK) != 0); +} + /* * Call with hotkey_mutex held */ @@ -1172,15 +1186,20 @@ static void tpacpi_input_send_radiosw(void) } } -static void tpacpi_input_send_tabletsw(unsigned int state) +static void tpacpi_input_send_tabletsw(void) { - mutex_lock(&tpacpi_inputdev_send_mutex); + int state; - input_report_switch(tpacpi_inputdev, - SW_TABLET_MODE, !!state); - input_sync(tpacpi_inputdev); + if (tp_features.hotkey_tablet && + !hotkey_get_tablet_mode(&state)) { + mutex_lock(&tpacpi_inputdev_send_mutex); - mutex_unlock(&tpacpi_inputdev_send_mutex); + input_report_switch(tpacpi_inputdev, + SW_TABLET_MODE, !!state); + input_sync(tpacpi_inputdev); + + mutex_unlock(&tpacpi_inputdev_send_mutex); + } } static void tpacpi_input_send_key(unsigned int scancode) @@ -1691,6 +1710,29 @@ static void hotkey_radio_sw_notify_change(void) "hotkey_radio_sw"); } +/* sysfs hotkey tablet mode (pollable) --------------------------------- */ +static ssize_t hotkey_tablet_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int res, s; + res = hotkey_get_tablet_mode(&s); + if (res < 0) + return res; + + return snprintf(buf, PAGE_SIZE, "%d\n", !!s); +} + +static struct device_attribute dev_attr_hotkey_tablet_mode = + __ATTR(hotkey_tablet_mode, S_IRUGO, hotkey_tablet_mode_show, NULL); + +static void hotkey_tablet_mode_notify_change(void) +{ + if (tp_features.hotkey_tablet) + sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, + "hotkey_tablet_mode"); +} + /* sysfs hotkey report_mode -------------------------------------------- */ static ssize_t hotkey_report_mode_show(struct device *dev, struct device_attribute *attr, @@ -1903,7 +1945,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(12, NULL); + hotkey_dev_attributes = create_attr_set(13, NULL); if (!hotkey_dev_attributes) return -ENOMEM; res = add_many_to_attr_set(hotkey_dev_attributes, @@ -1982,6 +2024,18 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) &dev_attr_hotkey_radio_sw.attr); } + /* For X41t, X60t, X61t Tablets... */ + if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { + tp_features.hotkey_tablet = 1; + printk(TPACPI_INFO + "possible tablet mode switch found; " + "ThinkPad in %s mode\n", + (status & TP_HOTKEY_TABLET_MASK)? + "tablet" : "laptop"); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_tablet_mode.attr); + } + if (!res) res = register_attr_set_with_sysfs( hotkey_dev_attributes, @@ -2031,7 +2085,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(EV_SW, tpacpi_inputdev->evbit); set_bit(SW_RADIO, tpacpi_inputdev->swbit); } - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + if (tp_features.hotkey_tablet) { set_bit(EV_SW, tpacpi_inputdev->evbit); set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); } @@ -2057,6 +2111,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_poll_setup_safe(1); tpacpi_input_send_radiosw(); + tpacpi_input_send_tabletsw(); } return (tp_features.hotkey)? 0 : 1; @@ -2187,9 +2242,10 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) case 0x500b: /* X61t: tablet pen inserted into bay */ case 0x500c: /* X61t: tablet pen removed from bay */ break; - case 0x5009: /* X61t: swivel up (tablet mode) */ - case 0x500a: /* X61t: swivel down (normal mode) */ - tpacpi_input_send_tabletsw((hkey == 0x5009)); + case 0x5009: /* X41t-X61t: swivel up (tablet mode) */ + case 0x500a: /* X41t-X61t: swivel down (normal mode) */ + tpacpi_input_send_tabletsw(); + hotkey_tablet_mode_notify_change(); send_acpi_ev = 0; break; case 0x5001: @@ -2250,6 +2306,7 @@ static void hotkey_resume(void) "from firmware\n"); tpacpi_input_send_radiosw(); hotkey_radio_sw_notify_change(); + hotkey_tablet_mode_notify_change(); hotkey_wakeup_reason_notify_change(); hotkey_wakeup_hotunplug_complete_notify_change(); hotkey_poll_setup_safe(0); From 4fd7f5188c377c1e9aa8f224f6edf96d170a7d32 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Fri, 15 Feb 2008 17:07:19 -0800 Subject: [PATCH 19/26] ACPI: sparse fix, replace macro with static function replace acpi_util_eval_error macro with static function. Avoid these sparse warnings due to using buffer within the macro. drivers/acpi/utils.c:273:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:259:21: originally declared here drivers/acpi/utils.c:279:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:259:21: originally declared here drivers/acpi/utils.c:368:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here drivers/acpi/utils.c:375:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here drivers/acpi/utils.c:382:3: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here drivers/acpi/utils.c:402:4: warning: symbol 'buffer' shadows an earlier one drivers/acpi/utils.c:348:21: originally declared here Signed-off-by: Harvey Harrison Signed-off-by: Len Brown --- drivers/acpi/utils.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 34f157571080..eba55b7d6c95 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -36,16 +36,20 @@ ACPI_MODULE_NAME("utils"); /* -------------------------------------------------------------------------- Object Evaluation Helpers -------------------------------------------------------------------------- */ +static void +acpi_util_eval_error(acpi_handle h, acpi_string p, acpi_status s) +{ #ifdef ACPI_DEBUG_OUTPUT -#define acpi_util_eval_error(h,p,s) {\ - char prefix[80] = {'\0'};\ - struct acpi_buffer buffer = {sizeof(prefix), prefix};\ - acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer);\ - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluate [%s.%s]: %s\n",\ - (char *) prefix, p, acpi_format_exception(s))); } + char prefix[80] = {'\0'}; + struct acpi_buffer buffer = {sizeof(prefix), prefix}; + acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluate [%s.%s]: %s\n", + (char *) prefix, p, acpi_format_exception(s))); #else -#define acpi_util_eval_error(h,p,s) + return; #endif +} + acpi_status acpi_extract_package(union acpi_object *package, struct acpi_buffer *format, struct acpi_buffer *buffer) From 262ee35be6a3aae9b4a7aafafc2dba901fc36620 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 16 Feb 2008 00:02:56 +0000 Subject: [PATCH 20/26] acer-wmi: Add DMI match for mail LED on Acer TravelMate 4200 series The TM4200 series use the same method as the TM2490 series to control the mail LED, so add a DMI based quirk for these laptops. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/misc/acer-wmi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index d7aea93081f2..74d12b4a3abd 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -271,6 +271,15 @@ static struct dmi_system_id acer_quirks[] = { }, .driver_data = &quirk_acer_travelmate_2490, }, + { + .callback = dmi_matched, + .ident = "Acer TravelMate 4200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4200"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, { .callback = dmi_matched, .ident = "Medion MD 98300", From e85ff4b53eb4252d967922bd75cb6d10863955f3 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Sat, 16 Feb 2008 01:01:13 -0500 Subject: [PATCH 21/26] ACPI: remove is_processor_present prototype The function itself is defined just below, so this prototype is not really useful. Signed-off-by: Glauber Costa Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 75ccf5d18bf4..923fddb2caa3 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -826,8 +826,6 @@ static int acpi_processor_remove(struct acpi_device *device, int type) * Acpi processor hotplug support * ****************************************************************************/ -static int is_processor_present(acpi_handle handle); - static int is_processor_present(acpi_handle handle) { acpi_status status; From 6133116849219f4e657ead39c7ac3922583f5a6e Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 19 Feb 2008 11:00:29 +0100 Subject: [PATCH 22/26] ACPI: TSC breaks atkbd suspend TSC is used even on machines when CONFIG_X86_TSC is not set (X86_TSC means _require_ TSC), but it is not properly disabled when it is unusable, because ACPI code understood the config switch as "may use TSC". This actually fixes suspend problems on my x60. Signed-off-by: Pavel Machek Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 980e1c33e6c5..6f3b217699e9 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -364,7 +364,7 @@ int acpi_processor_resume(struct acpi_device * device) return 0; } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) static int tsc_halts_in_c(int state) { switch (boot_cpu_data.x86_vendor) { @@ -544,7 +544,7 @@ static void acpi_processor_idle(void) /* Get end time (ticks) */ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC halts in C2, so notify users */ if (tsc_halts_in_c(ACPI_STATE_C2)) mark_tsc_unstable("possible TSC halt in C2"); @@ -609,7 +609,7 @@ static void acpi_processor_idle(void) acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC halts in C3, so notify users */ if (tsc_halts_in_c(ACPI_STATE_C3)) mark_tsc_unstable("TSC halts in C3"); @@ -1500,7 +1500,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, acpi_idle_do_entry(cx); t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC could halt in idle, so notify users */ if (tsc_halts_in_c(cx->type)) mark_tsc_unstable("TSC halts in idle");; @@ -1614,7 +1614,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, spin_unlock(&c3_lock); } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC could halt in idle, so notify users */ if (tsc_halts_in_c(ACPI_STATE_C3)) mark_tsc_unstable("TSC halts in idle"); From 1186974f3ffe3c1796e5efce7afffefcfda9a6f0 Mon Sep 17 00:00:00 2001 From: Ming Lin Date: Thu, 21 Feb 2008 02:01:30 -0500 Subject: [PATCH 23/26] ACPI: fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC drivers/acpi/executer/exregion.o drivers/acpi/executer/exregion.c: In function ‘acpi_ex_pci_config_space_handler’: drivers/acpi/executer/exregion.c:369: attention : passing argument 3 of ‘acpi_os_read_pci_configuration’ from incompatible pointer type exposed by 10270d4838bdc493781f5a1cf2e90e9c34c9142f http://bugzilla.kernel.org/show_bug.cgi?id=9989 Signed-off-by: Ming Lin Signed-off-by: Len Brown --- drivers/acpi/executer/exregion.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/executer/exregion.c b/drivers/acpi/executer/exregion.c index 2e9ce94798c7..3f51b7e84a17 100644 --- a/drivers/acpi/executer/exregion.c +++ b/drivers/acpi/executer/exregion.c @@ -338,6 +338,7 @@ acpi_ex_pci_config_space_handler(u32 function, acpi_status status = AE_OK; struct acpi_pci_id *pci_id; u16 pci_register; + u32 value32; ACPI_FUNCTION_TRACE(ex_pci_config_space_handler); @@ -364,9 +365,9 @@ acpi_ex_pci_config_space_handler(u32 function, switch (function) { case ACPI_READ: - *value = 0; status = acpi_os_read_pci_configuration(pci_id, pci_register, - value, bit_width); + &value32, bit_width); + *value = value32; break; case ACPI_WRITE: From 8a235efad548abd2ab5ebea45a9ffa750c814375 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 20 Feb 2008 01:47:44 +0100 Subject: [PATCH 24/26] Hibernation: Handle DEBUG_PAGEALLOC on x86 Make hibernation work with CONFIG_DEBUG_PAGEALLOC set on x86, by checking if the pages to be copied are marked as present in the kernel mapping and temporarily marking them as present if that's not the case. No functional modifications are introduced if CONFIG_DEBUG_PAGEALLOC is unset. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- arch/x86/mm/pageattr.c | 19 ++++++++++++++++++- include/linux/mm.h | 6 ++++++ kernel/power/snapshot.c | 42 ++++++++++++++++++++++++++++------------- 3 files changed, 53 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index e2a74ea11a53..464d8fc21ce6 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -899,7 +899,24 @@ void kernel_map_pages(struct page *page, int numpages, int enable) */ cpa_fill_pool(); } -#endif + +#ifdef CONFIG_HIBERNATION + +bool kernel_page_present(struct page *page) +{ + unsigned int level; + pte_t *pte; + + if (PageHighMem(page)) + return false; + + pte = lookup_address((unsigned long)page_address(page), &level); + return (pte_val(*pte) & _PAGE_PRESENT); +} + +#endif /* CONFIG_HIBERNATION */ + +#endif /* CONFIG_DEBUG_PAGEALLOC */ /* * The testcases use internal knowledge of the implementation that shouldn't diff --git a/include/linux/mm.h b/include/linux/mm.h index 26c7124b841a..3b3e1341163f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1171,12 +1171,18 @@ static inline void enable_debug_pagealloc(void) { debug_pagealloc_enabled = 1; } +#ifdef CONFIG_HIBERNATION +extern bool kernel_page_present(struct page *page); +#endif /* CONFIG_HIBERNATION */ #else static inline void kernel_map_pages(struct page *page, int numpages, int enable) {} static inline void enable_debug_pagealloc(void) { } +#ifdef CONFIG_HIBERNATION +static inline bool kernel_page_present(struct page *page) { return true; } +#endif /* CONFIG_HIBERNATION */ #endif extern struct vm_area_struct *get_gate_vma(struct task_struct *tsk); diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 95250d7c8d91..72a020cabb4c 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -875,8 +875,8 @@ static inline void *saveable_highmem_page(unsigned long pfn) { return NULL; } #endif /* CONFIG_HIGHMEM */ /** - * saveable - Determine whether a non-highmem page should be included in - * the suspend image. + * saveable_page - Determine whether a non-highmem page should be included + * in the suspend image. * * We should save the page if it isn't Nosave, and is not in the range * of pages statically defined as 'unsaveable', and it isn't a part of @@ -897,7 +897,8 @@ static struct page *saveable_page(unsigned long pfn) if (swsusp_page_is_forbidden(page) || swsusp_page_is_free(page)) return NULL; - if (PageReserved(page) && pfn_is_nosave(pfn)) + if (PageReserved(page) + && (!kernel_page_present(page) || pfn_is_nosave(pfn))) return NULL; return page; @@ -938,6 +939,25 @@ static inline void do_copy_page(long *dst, long *src) *dst++ = *src++; } + +/** + * safe_copy_page - check if the page we are going to copy is marked as + * present in the kernel page tables (this always is the case if + * CONFIG_DEBUG_PAGEALLOC is not set and in that case + * kernel_page_present() always returns 'true'). + */ +static void safe_copy_page(void *dst, struct page *s_page) +{ + if (kernel_page_present(s_page)) { + do_copy_page(dst, page_address(s_page)); + } else { + kernel_map_pages(s_page, 1, 1); + do_copy_page(dst, page_address(s_page)); + kernel_map_pages(s_page, 1, 0); + } +} + + #ifdef CONFIG_HIGHMEM static inline struct page * page_is_saveable(struct zone *zone, unsigned long pfn) @@ -946,8 +966,7 @@ page_is_saveable(struct zone *zone, unsigned long pfn) saveable_highmem_page(pfn) : saveable_page(pfn); } -static inline void -copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) +static void copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) { struct page *s_page, *d_page; void *src, *dst; @@ -961,29 +980,26 @@ copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) kunmap_atomic(src, KM_USER0); kunmap_atomic(dst, KM_USER1); } else { - src = page_address(s_page); if (PageHighMem(d_page)) { /* Page pointed to by src may contain some kernel * data modified by kmap_atomic() */ - do_copy_page(buffer, src); + safe_copy_page(buffer, s_page); dst = kmap_atomic(pfn_to_page(dst_pfn), KM_USER0); memcpy(dst, buffer, PAGE_SIZE); kunmap_atomic(dst, KM_USER0); } else { - dst = page_address(d_page); - do_copy_page(dst, src); + safe_copy_page(page_address(d_page), s_page); } } } #else #define page_is_saveable(zone, pfn) saveable_page(pfn) -static inline void -copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) +static inline void copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) { - do_copy_page(page_address(pfn_to_page(dst_pfn)), - page_address(pfn_to_page(src_pfn))); + safe_copy_page(page_address(pfn_to_page(dst_pfn)), + pfn_to_page(src_pfn)); } #endif /* CONFIG_HIGHMEM */ From c6868ea00bdebe5762fa59e54b74b4cd4e3b4e6e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 3 Feb 2008 22:53:31 +0100 Subject: [PATCH 25/26] PCI ACPI: Fix comment describing acpi_pci_choose_state The last line of the comment preceding the definition of acpi_pci_choose_state() is incorrect. Remove it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index e569645d59e2..e818e52dc39a 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -241,8 +241,6 @@ EXPORT_SYMBOL(pci_osc_control_set); * choose from highest power _SxD to lowest power _SxW * else // no _PRW at S-state x * choose highest power _SxD or any lower power - * - * currently we simply return _SxD, if present. */ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, From 19e20c913bae2dd458b9fc42afab0c53f16562d1 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 3 Feb 2008 22:55:18 +0100 Subject: [PATCH 26/26] PM: Make suspend_device() static suspend_device() can become static. Signed-off-by: Adrian Bunk Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown --- drivers/base/power/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index bdc03f7e8424..a96ca86a7b4a 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -415,7 +415,7 @@ EXPORT_SYMBOL_GPL(device_power_down); * @dev: Device. * @state: Power state device is entering. */ -int suspend_device(struct device *dev, pm_message_t state) +static int suspend_device(struct device *dev, pm_message_t state) { int error = 0;