[MIPS] Remove Momenco Ocelot G support
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Franck Bui-Huu
Ralf Baechle
parent
0b6249567b
commit
1e54f778af
16 changed files with 4 additions and 2036 deletions
|
|
@ -446,23 +446,6 @@ config MOMENCO_OCELOT_C
|
|||
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
|
||||
Momentum Computer <http://www.momenco.com/>.
|
||||
|
||||
config MOMENCO_OCELOT_G
|
||||
bool "Momentum Ocelot-G board"
|
||||
select DMA_NONCOHERENT
|
||||
select HW_HAS_PCI
|
||||
select IRQ_CPU
|
||||
select IRQ_CPU_RM7K
|
||||
select PCI_MARVELL
|
||||
select RM7000_CPU_SCACHE
|
||||
select SWAP_IO_SPACE
|
||||
select SYS_HAS_CPU_RM7000
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
help
|
||||
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
|
||||
Momentum Computer <http://www.momenco.com/>.
|
||||
|
||||
config MIPS_XXS1500
|
||||
bool "MyCable XXS1500 board"
|
||||
select DMA_NONCOHERENT
|
||||
|
|
@ -1081,9 +1064,9 @@ config WDT_RM9000
|
|||
choice
|
||||
prompt "Galileo Chip Clock"
|
||||
#default SYSCLK_83 if MIPS_EV64120
|
||||
depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
|
||||
depends on MIPS_EV64120 || MOMENCO_OCELOT
|
||||
default SYSCLK_83 if MIPS_EV64120
|
||||
default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
|
||||
default SYSCLK_100 if MOMENCO_OCELOT
|
||||
|
||||
config SYSCLK_75
|
||||
bool "75" if MIPS_EV64120
|
||||
|
|
@ -1092,7 +1075,7 @@ config SYSCLK_83
|
|||
bool "83.3" if MIPS_EV64120
|
||||
|
||||
config SYSCLK_100
|
||||
bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
|
||||
bool "100" if MIPS_EV64120 || MOMENCO_OCELOT
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
|
|||
|
|
@ -342,15 +342,6 @@ core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \
|
|||
cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot
|
||||
load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# Momentum Ocelot-G board
|
||||
#
|
||||
# The Ocelot-G setup.o must be linked early - it does the ioremap() for the
|
||||
# mips_io_port_base.
|
||||
#
|
||||
core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/
|
||||
load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# Momentum Ocelot-C and -CS boards
|
||||
#
|
||||
|
|
|
|||
|
|
@ -1,981 +0,0 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.20
|
||||
# Tue Feb 20 21:47:36 2007
|
||||
#
|
||||
CONFIG_MIPS=y
|
||||
|
||||
#
|
||||
# Machine selection
|
||||
#
|
||||
CONFIG_ZONE_DMA=y
|
||||
# CONFIG_MIPS_MTX1 is not set
|
||||
# CONFIG_MIPS_BOSPORUS is not set
|
||||
# CONFIG_MIPS_PB1000 is not set
|
||||
# CONFIG_MIPS_PB1100 is not set
|
||||
# CONFIG_MIPS_PB1500 is not set
|
||||
# CONFIG_MIPS_PB1550 is not set
|
||||
# CONFIG_MIPS_PB1200 is not set
|
||||
# CONFIG_MIPS_DB1000 is not set
|
||||
# CONFIG_MIPS_DB1100 is not set
|
||||
# CONFIG_MIPS_DB1500 is not set
|
||||
# CONFIG_MIPS_DB1550 is not set
|
||||
# CONFIG_MIPS_DB1200 is not set
|
||||
# CONFIG_MIPS_MIRAGE is not set
|
||||
# CONFIG_BASLER_EXCITE is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_LASAT is not set
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_WR_PPMC is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MOMENCO_JAGUAR_ATX is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
CONFIG_MOMENCO_OCELOT_G=y
|
||||
# CONFIG_MIPS_XXS1500 is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_DDB5477 is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_QEMU is not set
|
||||
# CONFIG_MARKEINS is not set
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_PTSWARM is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SNI_RM is not set
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4938 is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_IRQ_CPU_RM7K=y
|
||||
CONFIG_PCI_MARVELL=y
|
||||
CONFIG_SWAP_IO_SPACE=y
|
||||
# CONFIG_SYSCLK_75 is not set
|
||||
# CONFIG_SYSCLK_83 is not set
|
||||
CONFIG_SYSCLK_100=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
|
||||
#
|
||||
# CPU selection
|
||||
#
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
# CONFIG_CPU_MIPS32_R2 is not set
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
CONFIG_CPU_RM7000=y
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_SYS_HAS_CPU_RM7000=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
|
||||
|
||||
#
|
||||
# Kernel type
|
||||
#
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
CONFIG_BOARD_SCACHE=y
|
||||
CONFIG_RM7000_CPU_SCACHE=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_VPE_LOADER is not set
|
||||
# CONFIG_64BIT_PHYS_ADDR is not set
|
||||
CONFIG_CPU_HAS_LLSC=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
CONFIG_RESOURCES_64BIT=y
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
# CONFIG_HZ_48 is not set
|
||||
# CONFIG_HZ_100 is not set
|
||||
# CONFIG_HZ_128 is not set
|
||||
# CONFIG_HZ_250 is not set
|
||||
# CONFIG_HZ_256 is not set
|
||||
CONFIG_HZ_1000=y
|
||||
# CONFIG_HZ_1024 is not set
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_HZ=1000
|
||||
CONFIG_PREEMPT_NONE=y
|
||||
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_KEXEC is not set
|
||||
CONFIG_LOCKDEP_SUPPORT=y
|
||||
CONFIG_STACKTRACE_SUPPORT=y
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_IPC_NS is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
CONFIG_RELAY=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SYSCTL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
# CONFIG_MODULES is not set
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
CONFIG_LSF=y
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
||||
#
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_MMU=y
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
# CONFIG_HOTPLUG_PCI is not set
|
||||
|
||||
#
|
||||
# Executable file formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
CONFIG_PM=y
|
||||
# CONFIG_PM_LEGACY is not set
|
||||
# CONFIG_PM_DEBUG is not set
|
||||
# CONFIG_PM_SYSFS_DEPRECATED is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
# CONFIG_PACKET is not set
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM=y
|
||||
CONFIG_XFRM_USER=y
|
||||
# CONFIG_XFRM_SUB_POLICY is not set
|
||||
CONFIG_XFRM_MIGRATE=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_NET_KEY_MIGRATE=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
CONFIG_TCP_MD5SIG=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET6_TUNNEL is not set
|
||||
CONFIG_NETWORK_SECMARK=y
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_IEEE80211=y
|
||||
# CONFIG_IEEE80211_DEBUG is not set
|
||||
CONFIG_IEEE80211_CRYPT_WEP=y
|
||||
CONFIG_IEEE80211_CRYPT_CCMP=y
|
||||
CONFIG_IEEE80211_SOFTMAC=y
|
||||
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
|
||||
CONFIG_WIRELESS_EXT=y
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
CONFIG_FW_LOADER=y
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_PROC_EVENTS=y
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
# CONFIG_PNPACPI is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_CDROM_PKTCDVD=y
|
||||
CONFIG_CDROM_PKTCDVD_BUFFERS=8
|
||||
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
|
||||
CONFIG_ATA_OVER_ETH=y
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
CONFIG_SGI_IOC4=y
|
||||
# CONFIG_TIFM_CORE is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
CONFIG_RAID_ATTRS=y
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
|
||||
#
|
||||
# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
||||
#
|
||||
# CONFIG_ATA is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
CONFIG_PHYLIB=y
|
||||
|
||||
#
|
||||
# MII PHY device drivers
|
||||
#
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_QSEMI_PHY=y
|
||||
CONFIG_LXT_PHY=y
|
||||
CONFIG_CICADA_PHY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_GALILEO_64240_ETH=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
# CONFIG_NET_PCI is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SKY2 is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
CONFIG_QLA3XXX=y
|
||||
# CONFIG_ATL1 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
CONFIG_CHELSIO_T3=y
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
# CONFIG_MYRI10GE is not set
|
||||
CONFIG_NETXEN_NIC=y
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SERIO_PCIPS2 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
CONFIG_SERIO_RAW=y
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_HWMON_VID is not set
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FIRMWARE_EDID is not set
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# HID Devices
|
||||
#
|
||||
# CONFIG_HID is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
CONFIG_USB_ARCH_HAS_EHCI=y
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
|
||||
#
|
||||
# DMA Engine support
|
||||
#
|
||||
# CONFIG_DMA_ENGINE is not set
|
||||
|
||||
#
|
||||
# DMA Clients
|
||||
#
|
||||
|
||||
#
|
||||
# DMA Devices
|
||||
#
|
||||
|
||||
#
|
||||
# Auxiliary Display support
|
||||
#
|
||||
|
||||
#
|
||||
# Virtualization
|
||||
#
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_GFS2_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_GENERIC_ACL=y
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_PROC_SYSCTL=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_ECRYPT_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
# CONFIG_NFS_V3 is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
CONFIG_NFSD=y
|
||||
# CONFIG_NFSD_V3 is not set
|
||||
# CONFIG_NFSD_TCP is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_EXPORTFS=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Distributed Lock Manager
|
||||
#
|
||||
CONFIG_DLM=y
|
||||
CONFIG_DLM_TCP=y
|
||||
# CONFIG_DLM_SCTP is not set
|
||||
# CONFIG_DLM_DEBUG is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_CROSSCOMPILE=y
|
||||
CONFIG_CMDLINE=""
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
CONFIG_KEYS=y
|
||||
CONFIG_KEYS_DEBUG_PROC_KEYS=y
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
CONFIG_CRYPTO=y
|
||||
CONFIG_CRYPTO_ALGAPI=y
|
||||
CONFIG_CRYPTO_BLKCIPHER=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_HMAC=y
|
||||
CONFIG_CRYPTO_XCBC=y
|
||||
CONFIG_CRYPTO_NULL=y
|
||||
CONFIG_CRYPTO_MD4=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_SHA512=y
|
||||
CONFIG_CRYPTO_WP512=y
|
||||
CONFIG_CRYPTO_TGR192=y
|
||||
CONFIG_CRYPTO_GF128MUL=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_LRW=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_FCRYPT=y
|
||||
CONFIG_CRYPTO_BLOWFISH=y
|
||||
CONFIG_CRYPTO_TWOFISH=y
|
||||
CONFIG_CRYPTO_TWOFISH_COMMON=y
|
||||
CONFIG_CRYPTO_SERPENT=y
|
||||
CONFIG_CRYPTO_AES=y
|
||||
CONFIG_CRYPTO_CAST5=y
|
||||
CONFIG_CRYPTO_CAST6=y
|
||||
CONFIG_CRYPTO_TEA=y
|
||||
CONFIG_CRYPTO_ARC4=y
|
||||
CONFIG_CRYPTO_KHAZAD=y
|
||||
CONFIG_CRYPTO_ANUBIS=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_CAMELLIA=y
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRC32=y
|
||||
CONFIG_LIBCRC32C=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_PLIST=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
#
|
||||
# Makefile for Momentum Computer's Ocelot-G board.
|
||||
#
|
||||
|
||||
obj-y += irq.o gt-irq.o prom.o reset.o setup.o
|
||||
obj-$(CONFIG_KGDB) += dbg_io.o
|
||||
|
|
@ -1,121 +0,0 @@
|
|||
|
||||
#include <asm/serial.h> /* For the serial port location and base baud */
|
||||
|
||||
/* --- CONFIG --- */
|
||||
|
||||
typedef unsigned char uint8;
|
||||
typedef unsigned int uint32;
|
||||
|
||||
/* --- END OF CONFIG --- */
|
||||
|
||||
#define UART16550_BAUD_2400 2400
|
||||
#define UART16550_BAUD_4800 4800
|
||||
#define UART16550_BAUD_9600 9600
|
||||
#define UART16550_BAUD_19200 19200
|
||||
#define UART16550_BAUD_38400 38400
|
||||
#define UART16550_BAUD_57600 57600
|
||||
#define UART16550_BAUD_115200 115200
|
||||
|
||||
#define UART16550_PARITY_NONE 0
|
||||
#define UART16550_PARITY_ODD 0x08
|
||||
#define UART16550_PARITY_EVEN 0x18
|
||||
#define UART16550_PARITY_MARK 0x28
|
||||
#define UART16550_PARITY_SPACE 0x38
|
||||
|
||||
#define UART16550_DATA_5BIT 0x0
|
||||
#define UART16550_DATA_6BIT 0x1
|
||||
#define UART16550_DATA_7BIT 0x2
|
||||
#define UART16550_DATA_8BIT 0x3
|
||||
|
||||
#define UART16550_STOP_1BIT 0x0
|
||||
#define UART16550_STOP_2BIT 0x4
|
||||
|
||||
/* ----------------------------------------------------- */
|
||||
|
||||
/* === CONFIG === */
|
||||
|
||||
/* [jsun] we use the second serial port for kdb */
|
||||
#define BASE OCELOT_SERIAL1_BASE
|
||||
#define MAX_BAUD OCELOT_BASE_BAUD
|
||||
|
||||
/* === END OF CONFIG === */
|
||||
|
||||
#define REG_OFFSET 4
|
||||
|
||||
/* register offset */
|
||||
#define OFS_RCV_BUFFER 0
|
||||
#define OFS_TRANS_HOLD 0
|
||||
#define OFS_SEND_BUFFER 0
|
||||
#define OFS_INTR_ENABLE (1*REG_OFFSET)
|
||||
#define OFS_INTR_ID (2*REG_OFFSET)
|
||||
#define OFS_DATA_FORMAT (3*REG_OFFSET)
|
||||
#define OFS_LINE_CONTROL (3*REG_OFFSET)
|
||||
#define OFS_MODEM_CONTROL (4*REG_OFFSET)
|
||||
#define OFS_RS232_OUTPUT (4*REG_OFFSET)
|
||||
#define OFS_LINE_STATUS (5*REG_OFFSET)
|
||||
#define OFS_MODEM_STATUS (6*REG_OFFSET)
|
||||
#define OFS_RS232_INPUT (6*REG_OFFSET)
|
||||
#define OFS_SCRATCH_PAD (7*REG_OFFSET)
|
||||
|
||||
#define OFS_DIVISOR_LSB (0*REG_OFFSET)
|
||||
#define OFS_DIVISOR_MSB (1*REG_OFFSET)
|
||||
|
||||
|
||||
/* memory-mapped read/write of the port */
|
||||
#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
|
||||
#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
|
||||
|
||||
void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
|
||||
{
|
||||
/* disable interrupts */
|
||||
UART16550_WRITE(OFS_INTR_ENABLE, 0);
|
||||
|
||||
/* set up baud rate */
|
||||
{
|
||||
uint32 divisor;
|
||||
|
||||
/* set DIAB bit */
|
||||
UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
|
||||
|
||||
/* set divisor */
|
||||
divisor = MAX_BAUD / baud;
|
||||
UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
|
||||
UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
|
||||
|
||||
/* clear DIAB bit */
|
||||
UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
|
||||
}
|
||||
|
||||
/* set data format */
|
||||
UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
|
||||
}
|
||||
|
||||
static int remoteDebugInitialized = 0;
|
||||
|
||||
uint8 getDebugChar(void)
|
||||
{
|
||||
if (!remoteDebugInitialized) {
|
||||
remoteDebugInitialized = 1;
|
||||
debugInit(UART16550_BAUD_38400,
|
||||
UART16550_DATA_8BIT,
|
||||
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
|
||||
}
|
||||
|
||||
while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
|
||||
return UART16550_READ(OFS_RCV_BUFFER);
|
||||
}
|
||||
|
||||
|
||||
int putDebugChar(uint8 byte)
|
||||
{
|
||||
if (!remoteDebugInitialized) {
|
||||
remoteDebugInitialized = 1;
|
||||
debugInit(UART16550_BAUD_38400,
|
||||
UART16550_DATA_8BIT,
|
||||
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
|
||||
}
|
||||
|
||||
while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
|
||||
UART16550_WRITE(OFS_SEND_BUFFER, byte);
|
||||
return 1;
|
||||
}
|
||||
|
|
@ -1,212 +0,0 @@
|
|||
/*
|
||||
*
|
||||
* Copyright 2002 Momentum Computer
|
||||
* Author: mdharm@momenco.com
|
||||
*
|
||||
* arch/mips/momentum/ocelot_g/gt_irq.c
|
||||
* Interrupt routines for gt64240. Currently it only handles timer irq.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/kernel_stat.h>
|
||||
#include <asm/gt64240.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
unsigned long bus_clock;
|
||||
|
||||
/*
|
||||
* These are interrupt handlers for the GT on-chip interrupts. They
|
||||
* all come in to the MIPS on a single interrupt line, and have to
|
||||
* be handled and ack'ed differently than other MIPS interrupts.
|
||||
*/
|
||||
|
||||
#if 0
|
||||
|
||||
struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH];
|
||||
void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr);
|
||||
|
||||
/*
|
||||
* Hooks IRQ handler to the system. When the system is interrupted
|
||||
* the interrupt service routine is called.
|
||||
*
|
||||
* Inputs :
|
||||
* int_cause - The interrupt cause number. In EVB64120 two parameters
|
||||
* are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
|
||||
* bit_num - Indicates which bit number in the cause register
|
||||
* isr_ptr - Pointer to the interrupt service routine
|
||||
*/
|
||||
void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr)
|
||||
{
|
||||
irq_handlers[int_cause][bit_num].routine = isr_ptr;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Enables the IRQ on Galileo Chip
|
||||
*
|
||||
* Inputs :
|
||||
* int_cause - The interrupt cause number. In EVB64120 two parameters
|
||||
* are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
|
||||
* bit_num - Indicates which bit number in the cause register
|
||||
*
|
||||
* Outputs :
|
||||
* 1 if successful, 0 if failure
|
||||
*/
|
||||
int enable_galileo_irq(int int_cause, int bit_num)
|
||||
{
|
||||
if (int_cause == INT_CAUSE_MAIN)
|
||||
SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num));
|
||||
else if (int_cause == INT_CAUSE_HIGH)
|
||||
SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
|
||||
(1 << bit_num));
|
||||
else
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*
|
||||
* Disables the IRQ on Galileo Chip
|
||||
*
|
||||
* Inputs :
|
||||
* int_cause - The interrupt cause number. In EVB64120 two parameters
|
||||
* are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
|
||||
* bit_num - Indicates which bit number in the cause register
|
||||
*
|
||||
* Outputs :
|
||||
* 1 if successful, 0 if failure
|
||||
*/
|
||||
int disable_galileo_irq(int int_cause, int bit_num)
|
||||
{
|
||||
if (int_cause == INT_CAUSE_MAIN)
|
||||
RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER,
|
||||
(1 << bit_num));
|
||||
else if (int_cause == INT_CAUSE_HIGH)
|
||||
RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
|
||||
(1 << bit_num));
|
||||
else
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
#endif /* 0 */
|
||||
|
||||
/*
|
||||
* Interrupt handler for interrupts coming from the Galileo chip via P0_INT#.
|
||||
*
|
||||
* We route the timer interrupt to P0_INT# (IRQ 6), and that's all this
|
||||
* routine can handle, for now.
|
||||
*
|
||||
* In the future, we'll route more interrupts to this pin, and that's why
|
||||
* we keep this particular structure in the function.
|
||||
*/
|
||||
|
||||
static irqreturn_t gt64240_p0int_irq(int irq, void *dev)
|
||||
{
|
||||
uint32_t irq_src, irq_src_mask;
|
||||
int handled;
|
||||
|
||||
/* get the low interrupt cause register */
|
||||
irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
|
||||
|
||||
/* get the mask register for this pin */
|
||||
irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
|
||||
|
||||
/* mask off only the interrupts we're interested in */
|
||||
irq_src = irq_src & irq_src_mask;
|
||||
|
||||
handled = IRQ_NONE;
|
||||
|
||||
/* Check for timer interrupt */
|
||||
if (irq_src & 0x00000100) {
|
||||
handled = IRQ_HANDLED;
|
||||
irq_src &= ~0x00000100;
|
||||
|
||||
/* Clear any pending cause bits */
|
||||
MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
|
||||
|
||||
/* handle the timer call */
|
||||
do_timer(1);
|
||||
#ifndef CONFIG_SMP
|
||||
update_process_times(user_mode(get_irq_regs()));
|
||||
#endif
|
||||
}
|
||||
|
||||
if (irq_src) {
|
||||
printk(KERN_INFO
|
||||
"UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n",
|
||||
irq_src);
|
||||
}
|
||||
|
||||
return handled;
|
||||
}
|
||||
|
||||
/*
|
||||
* Initializes timer using galileo's built in timer.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This will ignore the standard MIPS timer interrupt handler
|
||||
* that is passed in as *irq (=irq0 in ../kernel/time.c).
|
||||
* We will do our own timer interrupt handling.
|
||||
*/
|
||||
void gt64240_time_init(void)
|
||||
{
|
||||
static struct irqaction timer;
|
||||
|
||||
/* Stop the timer -- we'll use timer #0 */
|
||||
MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
|
||||
|
||||
/* Load timer value for 100 Hz */
|
||||
MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
|
||||
|
||||
/*
|
||||
* Create the IRQ structure entry for the timer. Since we're too early
|
||||
* in the boot process to use the "request_irq()" call, we'll hard-code
|
||||
* the values to the correct interrupt line.
|
||||
*/
|
||||
timer.handler = >64240_p0int_irq;
|
||||
timer.flags = IRQF_SHARED | IRQF_DISABLED;
|
||||
timer.name = "timer";
|
||||
timer.dev_id = NULL;
|
||||
timer.next = NULL;
|
||||
timer.mask = CPU_MASK_NONE;
|
||||
irq_desc[6].action = &timer;
|
||||
|
||||
enable_irq(6);
|
||||
|
||||
/* Clear any pending cause bits */
|
||||
MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
|
||||
|
||||
/* Enable the interrupt for timer 0 */
|
||||
MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
|
||||
|
||||
/* Enable the timer interrupt for GT-64240 pin P0_INT# */
|
||||
MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
|
||||
|
||||
/* Configure and start the timer */
|
||||
MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
|
||||
}
|
||||
|
||||
void gt64240_irq_init(void)
|
||||
{
|
||||
#if 0
|
||||
int i, j;
|
||||
|
||||
/* Reset irq handlers pointers to NULL */
|
||||
for (i = 0; i < MAX_CAUSE_REGS; i++) {
|
||||
for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) {
|
||||
irq_handlers[i][j].next = NULL;
|
||||
irq_handlers[i][j].sync = 0;
|
||||
irq_handlers[i][j].routine = NULL;
|
||||
irq_handlers[i][j].data = NULL;
|
||||
}
|
||||
}
|
||||
#endif /* 0 */
|
||||
}
|
||||
|
|
@ -1,101 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2000 RidgeRun, Inc.
|
||||
* Author: RidgeRun, Inc.
|
||||
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
|
||||
*
|
||||
* Copyright 2001 MontaVista Software Inc.
|
||||
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
|
||||
* Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*/
|
||||
#include <linux/errno.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel_stat.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/signal.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/random.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/irq_cpu.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/system.h>
|
||||
|
||||
asmlinkage void plat_irq_dispatch(void)
|
||||
{
|
||||
unsigned int pending = read_c0_cause() & read_c0_status();
|
||||
|
||||
if (pending & STATUSF_IP2)
|
||||
do_IRQ(2);
|
||||
else if (pending & STATUSF_IP3)
|
||||
do_IRQ(3);
|
||||
else if (pending & STATUSF_IP4)
|
||||
do_IRQ(4);
|
||||
else if (pending & STATUSF_IP5)
|
||||
do_IRQ(5);
|
||||
else if (pending & STATUSF_IP6)
|
||||
do_IRQ(6);
|
||||
else if (pending & STATUSF_IP7)
|
||||
do_IRQ(7);
|
||||
else {
|
||||
/*
|
||||
* Now look at the extended interrupts
|
||||
*/
|
||||
pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
|
||||
|
||||
if (pending & STATUSF_IP8)
|
||||
do_IRQ(8);
|
||||
else if (pending & STATUSF_IP9)
|
||||
do_IRQ(9);
|
||||
else if (pending & STATUSF_IP10)
|
||||
do_IRQ(10);
|
||||
else if (pending & STATUSF_IP11)
|
||||
do_IRQ(11);
|
||||
else
|
||||
spurious_interrupt();
|
||||
}
|
||||
}
|
||||
|
||||
extern void gt64240_irq_init(void);
|
||||
|
||||
void __init arch_init_irq(void)
|
||||
{
|
||||
/*
|
||||
* Clear all of the interrupts while we change the able around a bit.
|
||||
* int-handler is not on bootstrap
|
||||
*/
|
||||
clear_c0_status(ST0_IM);
|
||||
local_irq_disable();
|
||||
|
||||
mips_cpu_irq_init();
|
||||
rm7k_cpu_irq_init();
|
||||
|
||||
gt64240_irq_init();
|
||||
}
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
/*
|
||||
* Ocelot Board Register Definitions
|
||||
*
|
||||
* (C) 2001 Red Hat, Inc.
|
||||
*
|
||||
* GPL'd
|
||||
*/
|
||||
#ifndef __MOMENCO_OCELOT_PLD_H__
|
||||
#define __MOMENCO_OCELOT_PLD_H__
|
||||
|
||||
#define OCELOT_CS0_ADDR (0xfc000000)
|
||||
|
||||
#define OCELOT_REG_BOARDREV (0)
|
||||
#define OCELOT_REG_PLD1_ID (1)
|
||||
#define OCELOT_REG_PLD2_ID (2)
|
||||
#define OCELOT_REG_RESET_STATUS (3)
|
||||
#define OCELOT_REG_BOARD_STATUS (4)
|
||||
#define OCELOT_REG_CPCI_ID (5)
|
||||
#define OCELOT_REG_I2C_CTRL (8)
|
||||
#define OCELOT_REG_EEPROM_MODE (9)
|
||||
#define OCELOT_REG_INTMASK (10)
|
||||
#define OCELOT_REG_INTSTATUS (11)
|
||||
#define OCELOT_REG_INTSET (12)
|
||||
#define OCELOT_REG_INTCLR (13)
|
||||
|
||||
#define __PLD_REG_TO_ADDR(reg) ((void *) OCELOT_CS0_ADDR + OCELOT_REG_##reg)
|
||||
#define OCELOT_PLD_WRITE(x, reg) writeb(x, __PLD_REG_TO_ADDR(reg))
|
||||
#define OCELOT_PLD_READ(reg) readb(__PLD_REG_TO_ADDR(reg))
|
||||
|
||||
#endif /* __MOMENCO_OCELOT_PLD_H__ */
|
||||
|
|
@ -1,84 +0,0 @@
|
|||
/*
|
||||
* Copyright 2002 Momentum Computer Inc.
|
||||
* Author: Matthew Dharm <mdharm@momenco.com>
|
||||
*
|
||||
* Based on Ocelot Linux port, which is
|
||||
* Copyright 2001 MontaVista Software Inc.
|
||||
* Author: jsun@mvista.com or jsun@junsun.net
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/bootmem.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/pmon.h>
|
||||
#include <asm/gt64240.h>
|
||||
|
||||
#include "ocelot_pld.h"
|
||||
|
||||
struct callvectors* debug_vectors;
|
||||
|
||||
extern unsigned long marvell_base;
|
||||
extern unsigned long bus_clock;
|
||||
|
||||
#ifdef CONFIG_GALILEO_GT64240_ETH
|
||||
extern unsigned char prom_mac_addr_base[6];
|
||||
#endif
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "Momentum Ocelot";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
int argc = fw_arg0;
|
||||
char **arg = (char **) fw_arg1;
|
||||
char **env = (char **) fw_arg2;
|
||||
struct callvectors *cv = (struct callvectors *) fw_arg3;
|
||||
int i;
|
||||
|
||||
/* save the PROM vectors for debugging use */
|
||||
debug_vectors = cv;
|
||||
|
||||
/* arg[0] is "g", the rest is boot parameters */
|
||||
arcs_cmdline[0] = '\0';
|
||||
for (i = 1; i < argc; i++) {
|
||||
if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
|
||||
>= sizeof(arcs_cmdline))
|
||||
break;
|
||||
strcat(arcs_cmdline, arg[i]);
|
||||
strcat(arcs_cmdline, " ");
|
||||
}
|
||||
|
||||
mips_machgroup = MACH_GROUP_MOMENCO;
|
||||
mips_machtype = MACH_MOMENCO_OCELOT_G;
|
||||
|
||||
#ifdef CONFIG_GALILEO_GT64240_ETH
|
||||
/* get the base MAC address for on-board ethernet ports */
|
||||
memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
|
||||
#endif
|
||||
|
||||
while (*env) {
|
||||
if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
|
||||
marvell_base = simple_strtol(*env + strlen("gtbase="),
|
||||
NULL, 16);
|
||||
}
|
||||
if (strncmp("busclock", *env, strlen("busclock")) == 0) {
|
||||
bus_clock = simple_strtol(*env + strlen("busclock="),
|
||||
NULL, 10);
|
||||
}
|
||||
env++;
|
||||
}
|
||||
}
|
||||
|
||||
void __init prom_free_prom_memory(void)
|
||||
{
|
||||
}
|
||||
|
|
@ -1,47 +0,0 @@
|
|||
/*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* Copyright (C) 1997, 2001 Ralf Baechle
|
||||
* Copyright 2001 MontaVista Software Inc.
|
||||
* Author: jsun@mvista.com or jsun@junsun.net
|
||||
*/
|
||||
#include <linux/sched.h>
|
||||
#include <linux/mm.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/system.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
void momenco_ocelot_restart(char *command)
|
||||
{
|
||||
void *nvram = ioremap_nocache(0x2c807000, 0x1000);
|
||||
|
||||
if (!nvram) {
|
||||
printk(KERN_NOTICE "ioremap of reset register failed\n");
|
||||
return;
|
||||
}
|
||||
writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to
|
||||
assert reset in 1/16 second */
|
||||
mdelay(10+(1000/16));
|
||||
iounmap(nvram);
|
||||
printk(KERN_NOTICE "Watchdog reset failed\n");
|
||||
}
|
||||
|
||||
void momenco_ocelot_halt(void)
|
||||
{
|
||||
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
|
||||
while (1)
|
||||
__asm__(".set\tmips3\n\t"
|
||||
"wait\n\t"
|
||||
".set\tmips0");
|
||||
}
|
||||
|
||||
void momenco_ocelot_power_off(void)
|
||||
{
|
||||
momenco_ocelot_halt();
|
||||
}
|
||||
|
|
@ -1,267 +0,0 @@
|
|||
/*
|
||||
* BRIEF MODULE DESCRIPTION
|
||||
* Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines
|
||||
*
|
||||
* Copyright (C) 1996, 1997, 2001 Ralf Baechle
|
||||
* Copyright (C) 2000 RidgeRun, Inc.
|
||||
* Copyright (C) 2001 Red Hat, Inc.
|
||||
* Copyright (C) 2002 Momentum Computer
|
||||
*
|
||||
* Author: Matthew Dharm, Momentum Computer
|
||||
* mdharm@momenco.com
|
||||
*
|
||||
* Author: RidgeRun, Inc.
|
||||
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
|
||||
*
|
||||
* Copyright 2001 MontaVista Software Inc.
|
||||
* Author: jsun@mvista.com or jsun@junsun.net
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/swap.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/vmalloc.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/gt64240.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/pci.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <linux/bootmem.h>
|
||||
|
||||
#include "ocelot_pld.h"
|
||||
|
||||
#ifdef CONFIG_GALILEO_GT64240_ETH
|
||||
extern unsigned char prom_mac_addr_base[6];
|
||||
#endif
|
||||
|
||||
unsigned long marvell_base;
|
||||
|
||||
/* These functions are used for rebooting or halting the machine*/
|
||||
extern void momenco_ocelot_restart(char *command);
|
||||
extern void momenco_ocelot_halt(void);
|
||||
extern void momenco_ocelot_power_off(void);
|
||||
|
||||
extern void gt64240_time_init(void);
|
||||
extern void momenco_ocelot_irq_setup(void);
|
||||
|
||||
static char reset_reason;
|
||||
|
||||
static unsigned long ENTRYLO(unsigned long paddr)
|
||||
{
|
||||
return ((paddr & PAGE_MASK) |
|
||||
(_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
|
||||
_CACHE_UNCACHED)) >> 6;
|
||||
}
|
||||
|
||||
/* setup code for a handoff from a version 2 PMON 2000 PROM */
|
||||
void PMON_v2_setup(void)
|
||||
{
|
||||
/* A wired TLB entry for the GT64240 and the serial port. The
|
||||
GT64240 is going to be hit on every IRQ anyway - there's
|
||||
absolutely no point in letting it be a random TLB entry, as
|
||||
it'll just cause needless churning of the TLB. And we use
|
||||
the other half for the serial port, which is just a PITA
|
||||
otherwise :)
|
||||
|
||||
Device Physical Virtual
|
||||
GT64240 Internal Regs 0xf4000000 0xe0000000
|
||||
UARTs (CS2) 0xfd000000 0xe0001000
|
||||
*/
|
||||
add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
|
||||
0xf4000000, PM_64K);
|
||||
add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000),
|
||||
0xfd000000, PM_4K);
|
||||
|
||||
/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
|
||||
in the CS[012] region. We can't use ioremap() yet. The NVRAM
|
||||
is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
|
||||
|
||||
Ocelot PLD (CS0) 0xfc000000 0xe0020000
|
||||
NVRAM (CS1) 0xfc800000 0xe0030000
|
||||
*/
|
||||
add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000),
|
||||
0xfc000000, PM_64K);
|
||||
add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000),
|
||||
0xfc800000, PM_64K);
|
||||
|
||||
marvell_base = 0xf4000000;
|
||||
}
|
||||
|
||||
extern int rm7k_tcache_enabled;
|
||||
|
||||
/*
|
||||
* This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
|
||||
*/
|
||||
#define Page_Invalidate_T 0x16
|
||||
static void __init setup_l3cache(unsigned long size)
|
||||
{
|
||||
int register i;
|
||||
|
||||
printk("Enabling L3 cache...");
|
||||
|
||||
/* Enable the L3 cache in the GT64120A's CPU Configuration register */
|
||||
MV_WRITE(0, MV_READ(0) | (1<<14));
|
||||
|
||||
/* Enable the L3 cache in the CPU */
|
||||
set_c0_config(1<<12 /* CONF_TE */);
|
||||
|
||||
/* Clear the cache */
|
||||
write_c0_taglo(0);
|
||||
write_c0_taghi(0);
|
||||
|
||||
for (i=0; i < size; i+= 4096) {
|
||||
__asm__ __volatile__ (
|
||||
".set noreorder\n\t"
|
||||
".set mips3\n\t"
|
||||
"cache %1, (%0)\n\t"
|
||||
".set mips0\n\t"
|
||||
".set reorder"
|
||||
:
|
||||
: "r" (KSEG0ADDR(i)),
|
||||
"i" (Page_Invalidate_T));
|
||||
}
|
||||
|
||||
/* Let the RM7000 MM code know that the tertiary cache is enabled */
|
||||
rm7k_tcache_enabled = 1;
|
||||
|
||||
printk("Done\n");
|
||||
}
|
||||
|
||||
void __init plat_timer_setup(struct irqaction *irq)
|
||||
{
|
||||
}
|
||||
|
||||
void __init plat_mem_setup(void)
|
||||
{
|
||||
void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
|
||||
unsigned int tmpword;
|
||||
|
||||
board_time_init = gt64240_time_init;
|
||||
|
||||
_machine_restart = momenco_ocelot_restart;
|
||||
_machine_halt = momenco_ocelot_halt;
|
||||
pm_power_off = momenco_ocelot_power_off;
|
||||
|
||||
/*
|
||||
* initrd_start = (unsigned long)ocelot_initrd_start;
|
||||
* initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
|
||||
* initrd_below_start_ok = 1;
|
||||
*/
|
||||
|
||||
/* do handoff reconfiguration */
|
||||
PMON_v2_setup();
|
||||
|
||||
#ifdef CONFIG_GALILEO_GT64240_ETH
|
||||
/* get the mac addr */
|
||||
memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
|
||||
#endif
|
||||
|
||||
/* Turn off the Bit-Error LED */
|
||||
OCELOT_PLD_WRITE(0x80, INTCLR);
|
||||
|
||||
tmpword = OCELOT_PLD_READ(BOARDREV);
|
||||
if (tmpword < 26)
|
||||
printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword);
|
||||
else
|
||||
printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword);
|
||||
|
||||
tmpword = OCELOT_PLD_READ(PLD1_ID);
|
||||
printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
|
||||
tmpword = OCELOT_PLD_READ(PLD2_ID);
|
||||
printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
|
||||
tmpword = OCELOT_PLD_READ(RESET_STATUS);
|
||||
printk("Reset reason: 0x%x\n", tmpword);
|
||||
reset_reason = tmpword;
|
||||
OCELOT_PLD_WRITE(0xff, RESET_STATUS);
|
||||
|
||||
tmpword = OCELOT_PLD_READ(BOARD_STATUS);
|
||||
printk("Board Status register: 0x%02x\n", tmpword);
|
||||
printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
|
||||
printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
|
||||
printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
|
||||
printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
|
||||
printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
|
||||
|
||||
if (tmpword&12)
|
||||
l3func((1<<(((tmpword&12) >> 2)+20)));
|
||||
|
||||
switch(tmpword &3) {
|
||||
case 3:
|
||||
/* 512MiB -- two banks of 256MiB */
|
||||
add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM);
|
||||
/*
|
||||
add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
|
||||
*/
|
||||
break;
|
||||
case 2:
|
||||
/* 256MiB -- two banks of 128MiB */
|
||||
add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM);
|
||||
add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
|
||||
break;
|
||||
case 1:
|
||||
/* 128MiB -- 64MiB per bank */
|
||||
add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
|
||||
add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
|
||||
break;
|
||||
case 0:
|
||||
/* 64MiB */
|
||||
add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
|
||||
break;
|
||||
}
|
||||
|
||||
/* FIXME: Fix up the DiskOnChip mapping */
|
||||
MV_WRITE(0x468, 0xfef73);
|
||||
}
|
||||
|
||||
/* This needs to be one of the first initcalls, because no I/O port access
|
||||
can work before this */
|
||||
|
||||
static int io_base_ioremap(void)
|
||||
{
|
||||
/* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
|
||||
unsigned long io_remap_range;
|
||||
|
||||
io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000);
|
||||
if (!io_remap_range)
|
||||
panic("Could not ioremap I/O port range");
|
||||
|
||||
set_io_port_base(io_remap_range - 0xc0000000);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
module_init(io_base_ioremap);
|
||||
|
|
@ -34,7 +34,6 @@ obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
|
|||
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
|
||||
obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o
|
||||
obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o
|
||||
obj-$(CONFIG_MOMENCO_OCELOT_G) += fixup-ocelot-g.o pci-ocelot-g.o
|
||||
obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
|
||||
pci-yosemite.o
|
||||
obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o
|
||||
|
|
|
|||
|
|
@ -1,37 +0,0 @@
|
|||
/*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
|
||||
*/
|
||||
#include <linux/types.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
int bus = dev->bus->number;
|
||||
|
||||
if (bus == 0 && slot == 1) /* Intel 82543 Gigabit MAC */
|
||||
return 2; /* irq_nr is 2 for INT0 */
|
||||
|
||||
if (bus == 0 && slot == 2) /* Intel 82543 Gigabit MAC */
|
||||
return 3; /* irq_nr is 3 for INT1 */
|
||||
|
||||
if (bus == 1 && slot == 3) /* Intel 21555 bridge */
|
||||
return 5; /* irq_nr is 8 for INT6 */
|
||||
|
||||
if (bus == 1 && slot == 4) /* PMC Slot */
|
||||
return 9; /* irq_nr is 9 for INT7 */
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Do platform specific device initialization at pci_enable_device() time */
|
||||
int pcibios_plat_dev_init(struct pci_dev *dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1,97 +0,0 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
|
||||
*
|
||||
* This doesn't really fly - but I don't have a GT64240 system for testing.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/pci.h>
|
||||
#include <asm/gt64240.h>
|
||||
|
||||
/*
|
||||
* We assume these address ranges have been programmed into the GT-64240 by
|
||||
* the firmware. PMON in case of the Ocelot G does that. Note the size of
|
||||
* the I/O range is completly stupid; I/O mappings are limited to at most
|
||||
* 256 bytes by the PCI spec and deprecated; and just to make things worse
|
||||
* apparently many devices don't decode more than 64k of I/O space.
|
||||
*/
|
||||
|
||||
#define gt_io_size 0x20000000UL
|
||||
#define gt_io_base 0xe0000000UL
|
||||
|
||||
static struct resource gt_pci_mem0_resource = {
|
||||
.name = "MV64240 PCI0 MEM",
|
||||
.start = 0xc0000000UL,
|
||||
.end = 0xcfffffffUL,
|
||||
.flags = IORESOURCE_MEM
|
||||
};
|
||||
|
||||
static struct resource gt_pci_io_mem0_resource = {
|
||||
.name = "MV64240 PCI0 IO MEM",
|
||||
.start = 0xe0000000UL,
|
||||
.end = 0xefffffffUL,
|
||||
.flags = IORESOURCE_IO
|
||||
};
|
||||
|
||||
static struct mv_pci_controller gt_bus0_controller = {
|
||||
.pcic = {
|
||||
.pci_ops = &mv_pci_ops,
|
||||
.mem_resource = >_pci_mem0_resource,
|
||||
.mem_offset = 0xc0000000UL,
|
||||
.io_resource = >_pci_io_mem0_resource,
|
||||
.io_offset = 0x00000000UL
|
||||
},
|
||||
.config_addr = PCI_0CONFIGURATION_ADDRESS,
|
||||
.config_vreg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
|
||||
};
|
||||
|
||||
static struct resource gt_pci_mem1_resource = {
|
||||
.name = "MV64240 PCI1 MEM",
|
||||
.start = 0xd0000000UL,
|
||||
.end = 0xdfffffffUL,
|
||||
.flags = IORESOURCE_MEM
|
||||
};
|
||||
|
||||
static struct resource gt_pci_io_mem1_resource = {
|
||||
.name = "MV64240 PCI1 IO MEM",
|
||||
.start = 0xf0000000UL,
|
||||
.end = 0xffffffffUL,
|
||||
.flags = IORESOURCE_IO
|
||||
};
|
||||
|
||||
static struct mv_pci_controller gt_bus1_controller = {
|
||||
.pcic = {
|
||||
.pci_ops = &mv_pci_ops,
|
||||
.mem_resource = >_pci_mem1_resource,
|
||||
.mem_offset = 0xd0000000UL,
|
||||
.io_resource = >_pci_io_mem1_resource,
|
||||
.io_offset = 0x10000000UL
|
||||
},
|
||||
.config_addr = PCI_1CONFIGURATION_ADDRESS,
|
||||
.config_vreg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER,
|
||||
};
|
||||
|
||||
static __init int __init ocelot_g_pci_init(void)
|
||||
{
|
||||
unsigned long io_v_base;
|
||||
|
||||
if (gt_io_size) {
|
||||
io_v_base = (unsigned long) ioremap(gt_io_base, gt_io_size);
|
||||
if (!io_v_base)
|
||||
panic("Could not ioremap I/O port range");
|
||||
|
||||
set_io_port_base(io_v_base);
|
||||
}
|
||||
|
||||
register_pci_controller(>_bus0_controller.pcic);
|
||||
register_pci_controller(>_bus1_controller.pcic);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(ocelot_g_pci_init);
|
||||
|
|
@ -119,7 +119,7 @@
|
|||
*/
|
||||
#define MACH_GROUP_MOMENCO 12 /* Momentum Boards */
|
||||
#define MACH_MOMENCO_OCELOT 0
|
||||
#define MACH_MOMENCO_OCELOT_G 1
|
||||
#define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */
|
||||
#define MACH_MOMENCO_OCELOT_C 2
|
||||
#define MACH_MOMENCO_JAGUAR_ATX 3
|
||||
#define MACH_MOMENCO_OCELOT_3 4
|
||||
|
|
|
|||
|
|
@ -134,27 +134,6 @@
|
|||
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MOMENCO_OCELOT_G
|
||||
/* Ordinary NS16552 duart with a 20MHz crystal. */
|
||||
#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
|
||||
|
||||
#define OCELOT_G_SERIAL1_IRQ 4
|
||||
#if 0
|
||||
#define OCELOT_G_SERIAL1_BASE 0xe0001020
|
||||
#else
|
||||
#define OCELOT_G_SERIAL1_BASE 0xfd000020
|
||||
#endif
|
||||
|
||||
#define _OCELOT_G_SERIAL_INIT(int, base) \
|
||||
{ .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
|
||||
.iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
|
||||
.io_type = SERIAL_IO_MEM }
|
||||
#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
|
||||
_OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
|
||||
#else
|
||||
#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MOMENCO_OCELOT_C
|
||||
/* Ordinary NS16552 duart with a 20MHz crystal. */
|
||||
#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
|
||||
|
|
@ -210,7 +189,6 @@
|
|||
IP32_SERIAL_PORT_DEFNS \
|
||||
JAZZ_SERIAL_PORT_DEFNS \
|
||||
STD_SERIAL_PORT_DEFNS \
|
||||
MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
|
||||
MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
|
||||
MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
|
||||
MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
|
||||
|
|
|
|||
Loading…
Reference in a new issue