From 9b4a1617772d6d5ab5eeda0cd95302fae119e359 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Feb 2006 10:48:10 +0000 Subject: [PATCH 1/8] [SERIAL] uart_port iotype member should use UPIO_* Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King --- arch/mips/lasat/setup.c | 2 +- arch/mips/mips-boards/atlas/atlas_setup.c | 2 +- arch/mips/mips-boards/sead/sead_setup.c | 2 +- arch/mips/mips-boards/sim/sim_setup.c | 2 +- arch/mips/philips/pnx8550/common/platform.c | 4 ++-- arch/ppc/platforms/4xx/bamboo.c | 2 +- arch/ppc/platforms/4xx/bubinga.c | 2 +- arch/ppc/platforms/4xx/ebony.c | 2 +- arch/ppc/platforms/4xx/luan.c | 2 +- arch/ppc/platforms/4xx/ocotea.c | 2 +- arch/ppc/platforms/4xx/xilinx_ml300.c | 2 +- arch/ppc/platforms/4xx/yucca.c | 2 +- arch/ppc/platforms/83xx/mpc834x_sys.c | 4 ++-- arch/ppc/platforms/85xx/mpc8540_ads.c | 4 ++-- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 4 ++-- arch/ppc/platforms/85xx/sbc8560.c | 2 +- arch/ppc/platforms/85xx/tqm85xx.c | 4 ++-- arch/ppc/platforms/chestnut.c | 2 +- arch/ppc/platforms/ev64260.c | 2 +- arch/ppc/platforms/radstone_ppc7d.c | 2 +- arch/ppc/platforms/spruce.c | 2 +- arch/ppc/syslib/ppc83xx_setup.c | 2 +- arch/ppc/syslib/ppc85xx_setup.c | 2 +- drivers/serial/21285.c | 2 +- drivers/serial/amba-pl010.c | 4 ++-- drivers/serial/au1x00_uart.c | 12 ++++++------ drivers/serial/cpm_uart/cpm_uart_core.c | 12 ++++++------ drivers/serial/dz.c | 2 +- drivers/serial/imx.c | 4 ++-- drivers/serial/mux.c | 2 +- drivers/serial/pmac_zilog.c | 2 +- drivers/serial/sa1100.c | 2 +- drivers/serial/serial_lh7a40x.c | 6 +++--- drivers/serial/sh-sci.c | 10 +++++----- drivers/serial/sunsab.c | 2 +- drivers/serial/sunsu.c | 10 +++++----- drivers/serial/sunzilog.c | 4 ++-- drivers/serial/v850e_uart.c | 2 +- 38 files changed, 66 insertions(+), 66 deletions(-) diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index dcd819d57dae..cefcf738bc00 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -135,7 +135,7 @@ void __init serial_init(void) memset(&s, 0, sizeof(s)); s.flags = STD_COM_FLAGS; - s.iotype = SERIAL_IO_MEM; + s.iotype = UPIO_MEM; if (mips_machtype == MACH_LASAT_100) { s.uartclk = LASAT_BASE_BAUD_100 * 16; diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 625843b30bed..2d4f3090fd86 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -83,7 +83,7 @@ static void __init serial_init(void) s.irq = ATLASINT_UART; s.uartclk = ATLAS_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - s.iotype = SERIAL_IO_PORT; + s.iotype = UPIO_PORT; s.regshift = 3; if (early_serial_setup(&s) != 0) { diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index f966bc161dfa..a72ef29289b6 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -72,7 +72,7 @@ static void __init serial_init(void) s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0; s.uartclk = SEAD_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - s.iotype = 0; + s.iotype = UPIO_PORT; s.regshift = 3; if (early_serial_setup(&s) != 0) { diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c index 485d5a58d9cf..87a14a731ae8 100644 --- a/arch/mips/mips-boards/sim/sim_setup.c +++ b/arch/mips/mips-boards/sim/sim_setup.c @@ -89,7 +89,7 @@ static void __init serial_init(void) s.irq = 0; s.uartclk = BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST; - s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST; + s.iotype = UPIO_PORT; s.regshift = 0; s.timeout = 4; diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c index 8aa9bd65b45e..35be6db4245f 100644 --- a/arch/mips/philips/pnx8550/common/platform.c +++ b/arch/mips/philips/pnx8550/common/platform.c @@ -66,7 +66,7 @@ struct ip3106_port ip3106_ports[] = { [0] = { .port = { .type = PORT_IP3106, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void __iomem *)PNX8550_UART_PORT0, .mapbase = PNX8550_UART_PORT0, .irq = PNX8550_UART_INT(0), @@ -80,7 +80,7 @@ struct ip3106_port ip3106_ports[] = { [1] = { .port = { .type = PORT_IP3106, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void __iomem *)PNX8550_UART_PORT1, .mapbase = PNX8550_UART_PORT1, .irq = PNX8550_UART_INT(1), diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index 159b228eca1e..c371d54d2552 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -332,7 +332,7 @@ bamboo_early_serial_map(void) port.irq = 0; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 8110f55668c5..0fe8da1401da 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -97,7 +97,7 @@ bubinga_early_serial_map(void) port.irq = ACTING_UART0_INT; port.uartclk = uart_clock; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 64ebae19cdbb..352b76c08987 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -225,7 +225,7 @@ ebony_early_serial_map(void) port.irq = 0; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index d810b736d9bf..a94683a72a1e 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -279,7 +279,7 @@ luan_early_serial_map(void) port.irq = UART0_INT; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 73b2c98158f6..de916bb4617c 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -248,7 +248,7 @@ ocotea_early_serial_map(void) port.irq = UART0_INT; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index 0b1b77d986bf..3f820229071e 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -95,7 +95,7 @@ ml300_early_serial_map(void) port.irq = old_ports[i].irq; port.uartclk = old_ports[i].baud_base * 16; port.regshift = old_ports[i].iomem_reg_shift; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = i; diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index e60f4bd437ec..2b84fc6247d3 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -305,7 +305,7 @@ yucca_early_serial_map(void) port.irq = UART0_INT; port.uartclk = clocks.uart0; port.regshift = 0; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; port.line = 0; diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 012e1e652c03..1a659bbc1860 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -301,14 +301,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500); p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600); p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 2eceb1e6f4eb..408d64f18e1a 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -162,14 +162,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index b332ebae6bd3..1801ab392e22 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -534,14 +534,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index e777ba824aa9..8a72221f816c 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -64,7 +64,7 @@ sbc8560_early_serial_map(void) uart_req.irq = MPC85xx_IRQ_EXT9; uart_req.flags = STD_COM_FLAGS; uart_req.uartclk = BASE_BAUD * 16; - uart_req.iotype = SERIAL_IO_MEM; + uart_req.iotype = UPIO_MEM; uart_req.mapbase = UARTA_ADDR; uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE); uart_req.type = PORT_16650; diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index b436f4d0a3fa..a5e38ba62732 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -346,14 +346,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); - p.iotype = SERIAL_IO_MEM; + p.iotype = UPIO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c index 48a4a510d598..aefcc0e7be57 100644 --- a/arch/ppc/platforms/chestnut.c +++ b/arch/ppc/platforms/chestnut.c @@ -116,7 +116,7 @@ chestnut_early_serial_map(void) port.uartclk = BASE_BAUD * 16; port.irq = UART0_INT; port.flags = STD_COM_FLAGS | UPF_IOREMAP; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.mapbase = CHESTNUT_UART0_IO_BASE; port.regshift = 0; diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index 32358b3fb236..ffde8f6f6302 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -330,7 +330,7 @@ ev64260_early_serial_map(void) port.irq = EV64260_UART_0_IRQ; port.uartclk = BASE_BAUD * 16; port.regshift = 2; - port.iotype = SERIAL_IO_MEM; + port.iotype = UPIO_MEM; port.flags = STD_COM_FLAGS; #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 708b8739ecdd..872c0a3ba3c7 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -100,7 +100,7 @@ static void __init ppc7d_early_serial_map(void) serial_req.uartclk = UART_CLK; serial_req.irq = 4; serial_req.flags = STD_COM_FLAGS; - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.membase = (u_char *) PPC7D_SERIAL_0; gen550_init(0, &serial_req); diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c index 5ad70d357cb9..510182ea9d28 100644 --- a/arch/ppc/platforms/spruce.c +++ b/arch/ppc/platforms/spruce.c @@ -177,7 +177,7 @@ spruce_early_serial_map(void) serial_req.uartclk = uart_clk; serial_req.irq = UART0_INT; serial_req.flags = ASYNC_BOOT_AUTOCONF; - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.membase = (u_char *)UART0_IO_BASE; serial_req.regshift = 0; diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 1b5fe9e398d4..7bada82527a8 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -108,7 +108,7 @@ mpc83xx_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.mapbase = pdata[0].mapbase; serial_req.membase = pdata[0].membase; serial_req.regshift = 0; diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 1a47ff4b831d..e4dda43fdaa7 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -90,7 +90,7 @@ mpc85xx_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = SERIAL_IO_MEM; + serial_req.iotype = UPIO_MEM; serial_req.mapbase = pdata[0].mapbase; serial_req.membase = pdata[0].membase; serial_req.regshift = 0; diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 7aef7518b0d1..8c5c276c5577 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -362,7 +362,7 @@ static struct uart_ops serial21285_ops = { static struct uart_port serial21285_port = { .mapbase = 0x42000160, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = NO_IRQ, .fifosize = 16, .ops = &serial21285_ops, diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 429de2723a1c..321a3b3a5728 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -561,7 +561,7 @@ static struct uart_amba_port amba_ports[UART_NR] = { .port = { .membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE), .mapbase = INTEGRATOR_UART0_BASE, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UARTINT0, .uartclk = 14745600, .fifosize = 16, @@ -576,7 +576,7 @@ static struct uart_amba_port amba_ports[UART_NR] = { .port = { .membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE), .mapbase = INTEGRATOR_UART1_BASE, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UARTINT1, .uartclk = 14745600, .fifosize = 16, diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c index ceb5d7f37bbd..344022fe53ef 100644 --- a/drivers/serial/au1x00_uart.c +++ b/drivers/serial/au1x00_uart.c @@ -892,7 +892,7 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res int ret = 0; switch (up->port.iotype) { - case SERIAL_IO_MEM: + case UPIO_MEM: if (up->port.mapbase) { *res = request_mem_region(up->port.mapbase, size, "serial"); if (!*res) @@ -900,8 +900,8 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res } break; - case SERIAL_IO_HUB6: - case SERIAL_IO_PORT: + case UPIO_HUB6: + case UPIO_PORT: *res = request_region(up->port.iobase, size, "serial"); if (!*res) ret = -EBUSY; @@ -919,7 +919,7 @@ static void serial8250_release_port(struct uart_port *port) size <<= up->port.regshift; switch (up->port.iotype) { - case SERIAL_IO_MEM: + case UPIO_MEM: if (up->port.mapbase) { /* * Unmap the area. @@ -935,8 +935,8 @@ static void serial8250_release_port(struct uart_port *port) } break; - case SERIAL_IO_HUB6: - case SERIAL_IO_PORT: + case UPIO_HUB6: + case UPIO_PORT: start = up->port.iobase; if (size) diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 16af5626c243..3d80846e384a 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -908,7 +908,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SMC1_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .flags = FLAG_SMC, @@ -922,7 +922,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SMC2_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .flags = FLAG_SMC, @@ -939,7 +939,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC1_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, @@ -953,7 +953,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC2_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, @@ -967,7 +967,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC3_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, @@ -981,7 +981,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .port = { .irq = SCC4_IRQ, .ops = &cpm_uart_pops, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .lock = SPIN_LOCK_UNLOCKED, }, .tx_nrfifos = TX_NUM_FIFO, diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index a64ba26a94e8..5ff1e834792c 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -650,7 +650,7 @@ static void __init dz_init_ports(void) for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) { spin_lock_init(&dport->port.lock); dport->port.membase = (char *) base; - dport->port.iotype = SERIAL_IO_PORT; + dport->port.iotype = UPIO_PORT; dport->port.irq = dec_interrupt[DEC_IRQ_DZ11]; dport->port.line = i; dport->port.fifosize = 1; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 858048efe1ed..4d53fb5ca87b 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -668,7 +668,7 @@ static struct imx_port imx_ports[] = { .rtsirq = UART1_MINT_RTS, .port = { .type = PORT_IMX, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void *)IMX_UART1_BASE, .mapbase = IMX_UART1_BASE, /* FIXME */ .irq = UART1_MINT_RX, @@ -684,7 +684,7 @@ static struct imx_port imx_ports[] = { .rtsirq = UART2_MINT_RTS, .port = { .type = PORT_IMX, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .membase = (void *)IMX_UART2_BASE, .mapbase = IMX_UART2_BASE, /* FIXME */ .irq = UART2_MINT_RX, diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 4e49168c3176..868eaf4a1a68 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -462,7 +462,7 @@ static int __init mux_probe(struct parisc_device *dev) port->mapbase = dev->hpa.start + MUX_OFFSET + (i * MUX_LINE_OFFSET); port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); - port->iotype = SERIAL_IO_MEM; + port->iotype = UPIO_MEM; port->type = PORT_MUX; port->irq = NO_IRQ; port->uartclk = 0; diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 4e03a87f3fb4..9b7ed58cb53b 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1492,7 +1492,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) /* * Init remaining bits of "port" structure */ - uap->port.iotype = SERIAL_IO_MEM; + uap->port.iotype = UPIO_MEM; uap->port.irq = np->intrs[0].line; uap->port.uartclk = ZS_CLOCK; uap->port.fifosize = 1; diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index ff7b60b4de37..2c00b8625852 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -628,7 +628,7 @@ static void __init sa1100_init_ports(void) sa1100_ports[i].port.ops = &sa1100_pops; sa1100_ports[i].port.fifosize = 8; sa1100_ports[i].port.line = i; - sa1100_ports[i].port.iotype = SERIAL_IO_MEM; + sa1100_ports[i].port.iotype = UPIO_MEM; init_timer(&sa1100_ports[i].timer); sa1100_ports[i].timer.function = sa1100_timeout; sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index d0490f67f597..04186eaae227 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -501,7 +501,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .port = { .membase = (void*) io_p2v (UART1_PHYS), .mapbase = UART1_PHYS, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UART1INTR, .uartclk = 14745600/2, .fifosize = 16, @@ -514,7 +514,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .port = { .membase = (void*) io_p2v (UART2_PHYS), .mapbase = UART2_PHYS, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UART2INTR, .uartclk = 14745600/2, .fifosize = 16, @@ -527,7 +527,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .port = { .membase = (void*) io_p2v (UART3_PHYS), .mapbase = UART3_PHYS, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = IRQ_UART3INTR, .uartclk = 14745600/2, .fifosize = 16, diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 80737c131ce7..c903349bb40a 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1468,7 +1468,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xff923000, .mapbase = 0xff923000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 61, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1482,7 +1482,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xff924000, .mapbase = 0xff924000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 62, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1496,7 +1496,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xff925000, .mapbase = 0xff925000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 63, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1511,7 +1511,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xffe00000, .mapbase = 0xffe00000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, @@ -1525,7 +1525,7 @@ static struct sci_port sci_ports[] = { .port = { .membase = (void *)0xffe10000, .mapbase = 0xffe10000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 79, .ops = &sci_uart_ops, .flags = ASYNC_BOOT_AUTOCONF, diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 8bcaebcc0ad7..85664228a0b6 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1036,7 +1036,7 @@ static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg up->port.irq = edev->irqs[0]; up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; up->port.mapbase = (unsigned long)up->regs; - up->port.iotype = SERIAL_IO_MEM; + up->port.iotype = UPIO_MEM; writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index bc67442c6b4c..308704566948 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -109,11 +109,11 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) offset <<= up->port.regshift; switch (up->port.iotype) { - case SERIAL_IO_HUB6: + case UPIO_HUB6: outb(up->port.hub6 - 1 + offset, up->port.iobase); return inb(up->port.iobase + 1); - case SERIAL_IO_MEM: + case UPIO_MEM: return readb(up->port.membase + offset); default: @@ -139,12 +139,12 @@ serial_out(struct uart_sunsu_port *up, int offset, int value) offset <<= up->port.regshift; switch (up->port.iotype) { - case SERIAL_IO_HUB6: + case UPIO_HUB6: outb(up->port.hub6 - 1 + offset, up->port.iobase); outb(value, up->port.iobase + 1); break; - case SERIAL_IO_MEM: + case UPIO_MEM: writeb(value, up->port.membase + offset); break; @@ -1052,7 +1052,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up) return; up->type_probed = PORT_UNKNOWN; - up->port.iotype = SERIAL_IO_MEM; + up->port.iotype = UPIO_MEM; /* * First we look for Ebus-bases su's diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 3c72484adea7..5cc4d4c2935c 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1487,7 +1487,7 @@ static void __init sunzilog_prepare(void) up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB; /* Channel A */ - up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM; + up[(chip * 2) + 0].port.iotype = UPIO_MEM; up[(chip * 2) + 0].port.irq = zilog_irq; up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; up[(chip * 2) + 0].port.fifosize = 1; @@ -1498,7 +1498,7 @@ static void __init sunzilog_prepare(void) up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; /* Channel B */ - up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM; + up[(chip * 2) + 1].port.iotype = UPIO_MEM; up[(chip * 2) + 1].port.irq = zilog_irq; up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; up[(chip * 2) + 1].port.fifosize = 1; diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c index 9378895a8d56..df705fda4243 100644 --- a/drivers/serial/v850e_uart.c +++ b/drivers/serial/v850e_uart.c @@ -496,7 +496,7 @@ static int __init v850e_uart_init (void) port->ops = &v850e_uart_ops; port->line = chan; - port->iotype = SERIAL_IO_MEM; + port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; /* We actually use multiple IRQs, but the serial From 59a675b22026e29e7f281d7b832de67dd8559b83 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Feb 2006 10:52:29 +0000 Subject: [PATCH 2/8] [SERIAL] uart_port flags member should use UPF_* Convert usage of ASYNC_* to UPF_*. Signed-off-by: Russell King --- arch/mips/cobalt/setup.c | 2 +- arch/mips/lasat/setup.c | 2 +- arch/mips/mips-boards/atlas/atlas_setup.c | 2 +- arch/mips/mips-boards/sead/sead_setup.c | 2 +- arch/mips/mips-boards/sim/sim_setup.c | 2 +- arch/mips/momentum/jaguar_atx/ja-console.c | 2 +- arch/mips/philips/pnx8550/common/platform.c | 4 ++-- arch/mips/pmc-sierra/yosemite/setup.c | 2 +- arch/mips/sgi-ip32/ip32-setup.c | 13 ++++--------- arch/ppc/platforms/4xx/bamboo.c | 2 +- arch/ppc/platforms/4xx/bubinga.c | 2 +- arch/ppc/platforms/4xx/ebony.c | 2 +- arch/ppc/platforms/4xx/luan.c | 2 +- arch/ppc/platforms/4xx/ocotea.c | 2 +- arch/ppc/platforms/4xx/xilinx_ml300.c | 2 +- arch/ppc/platforms/4xx/yucca.c | 2 +- arch/ppc/platforms/spruce.c | 2 +- drivers/serial/m32r_sio.c | 2 +- drivers/serial/sh-sci.c | 10 +++++----- 19 files changed, 27 insertions(+), 32 deletions(-) diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index d358a118fa31..38c0c67d6a2a 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -139,7 +139,7 @@ void __init plat_setup(void) uart.type = PORT_UNKNOWN; uart.uartclk = 18432000; uart.irq = COBALT_SERIAL_IRQ; - uart.flags = STD_COM_FLAGS; + uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; uart.iobase = 0xc800000; uart.iotype = UPIO_PORT; diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index cefcf738bc00..83eb08b7a072 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -134,7 +134,7 @@ void __init serial_init(void) memset(&s, 0, sizeof(s)); - s.flags = STD_COM_FLAGS; + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; s.iotype = UPIO_MEM; if (mips_machtype == MACH_LASAT_100) { diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 2d4f3090fd86..873cf3141a31 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -82,7 +82,7 @@ static void __init serial_init(void) #endif s.irq = ATLASINT_UART; s.uartclk = ATLAS_BASE_BAUD * 16; - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; s.iotype = UPIO_PORT; s.regshift = 3; diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index a72ef29289b6..4266ce445174 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -71,7 +71,7 @@ static void __init serial_init(void) #endif s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0; s.uartclk = SEAD_BASE_BAUD * 16; - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; s.iotype = UPIO_PORT; s.regshift = 3; diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c index 87a14a731ae8..a2fd62997ca3 100644 --- a/arch/mips/mips-boards/sim/sim_setup.c +++ b/arch/mips/mips-boards/sim/sim_setup.c @@ -88,7 +88,7 @@ static void __init serial_init(void) but poll for now */ s.irq = 0; s.uartclk = BASE_BAUD * 16; - s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST; + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; s.iotype = UPIO_PORT; s.regshift = 0; s.timeout = 4; diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c index da6e1ed34db1..2292d0ec47fc 100644 --- a/arch/mips/momentum/jaguar_atx/ja-console.c +++ b/arch/mips/momentum/jaguar_atx/ja-console.c @@ -93,7 +93,7 @@ static void inline ja_console_probe(void) up.uartclk = JAGUAR_ATX_UART_CLK; up.regshift = 2; up.iotype = UPIO_MEM; - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; up.line = 0; if (early_serial_setup(&up)) diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c index 35be6db4245f..a592260fd673 100644 --- a/arch/mips/philips/pnx8550/common/platform.c +++ b/arch/mips/philips/pnx8550/common/platform.c @@ -73,7 +73,7 @@ struct ip3106_port ip3106_ports[] = { .uartclk = 3692300, .fifosize = 16, .ops = &ip3106_pops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, }, @@ -87,7 +87,7 @@ struct ip3106_port ip3106_ports[] = { .uartclk = 3692300, .fifosize = 16, .ops = &ip3106_pops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, }, diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index 059755b5ed57..8bce711575de 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -185,7 +185,7 @@ static void __init py_uart_setup(void) up.uartclk = TITAN_UART_CLK; up.regshift = 0; up.iotype = UPIO_MEM; - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; up.line = 0; if (early_serial_setup(&up)) diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index d10a269aeae1..2c38770b1e1b 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) #include #include #include -extern int early_serial_setup(struct uart_port *port); - -#define STD_COM_FLAGS (ASYNC_SKIP_TEST) -#define BASE_BAUD (1843200 / 16) - #endif /* CONFIG_SERIAL_8250 */ /* An arbitrary time; this can be decreased if reliability looks good */ @@ -110,8 +105,8 @@ void __init plat_setup(void) o2_serial[0].type = PORT_16550A; o2_serial[0].line = 0; o2_serial[0].irq = MACEISA_SERIAL1_IRQ; - o2_serial[0].flags = STD_COM_FLAGS; - o2_serial[0].uartclk = BASE_BAUD * 16; + o2_serial[0].flags = UPF_SKIP_TEST; + o2_serial[0].uartclk = 1843200; o2_serial[0].iotype = UPIO_MEM; o2_serial[0].membase = (char *)&mace->isa.serial1; o2_serial[0].fifosize = 14; @@ -121,8 +116,8 @@ void __init plat_setup(void) o2_serial[1].type = PORT_16550A; o2_serial[1].line = 1; o2_serial[1].irq = MACEISA_SERIAL2_IRQ; - o2_serial[1].flags = STD_COM_FLAGS; - o2_serial[1].uartclk = BASE_BAUD * 16; + o2_serial[1].flags = UPF_SKIP_TEST; + o2_serial[1].uartclk = 1843200; o2_serial[1].iotype = UPIO_MEM; o2_serial[1].membase = (char *)&mace->isa.serial2; o2_serial[1].fifosize = 14; diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index c371d54d2552..0ec53f049338 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -333,7 +333,7 @@ bamboo_early_serial_map(void) port.uartclk = clocks.uart0; port.regshift = 0; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = 0; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 0fe8da1401da..ce48a4f08cbb 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -98,7 +98,7 @@ bubinga_early_serial_map(void) port.uartclk = uart_clock; port.regshift = 0; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = 0; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 352b76c08987..9a828b623417 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -226,7 +226,7 @@ ebony_early_serial_map(void) port.uartclk = clocks.uart0; port.regshift = 0; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = 0; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index a94683a72a1e..21d29132aebd 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -280,7 +280,7 @@ luan_early_serial_map(void) port.uartclk = clocks.uart0; port.regshift = 0; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = 0; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index de916bb4617c..4f355b6acab2 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -249,7 +249,7 @@ ocotea_early_serial_map(void) port.uartclk = clocks.uart0; port.regshift = 0; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = 0; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index 3f820229071e..e90d97f64f76 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -96,7 +96,7 @@ ml300_early_serial_map(void) port.uartclk = old_ports[i].baud_base * 16; port.regshift = old_ports[i].iomem_reg_shift; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = i; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index 2b84fc6247d3..b065b8babcd3 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -306,7 +306,7 @@ yucca_early_serial_map(void) port.uartclk = clocks.uart0; port.regshift = 0; port.iotype = UPIO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; port.line = 0; if (early_serial_setup(&port) != 0) { diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c index 510182ea9d28..69e1de7971f2 100644 --- a/arch/ppc/platforms/spruce.c +++ b/arch/ppc/platforms/spruce.c @@ -176,7 +176,7 @@ spruce_early_serial_map(void) memset(&serial_req, 0, sizeof(serial_req)); serial_req.uartclk = uart_clk; serial_req.irq = UART0_INT; - serial_req.flags = ASYNC_BOOT_AUTOCONF; + serial_req.flags = UPF_BOOT_AUTOCONF; serial_req.iotype = UPIO_MEM; serial_req.membase = (u_char *)UART0_IO_BASE; serial_req.regshift = 0; diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index b48066a64a7d..242a04104393 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -80,7 +80,7 @@ #include /* Standard COM flags */ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) /* * SERIAL_PORT_DFNS tells us about built-in ports that have no diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index c903349bb40a..44f6bf79bbe1 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1471,7 +1471,7 @@ static struct sci_port sci_ports[] = { .iotype = UPIO_MEM, .irq = 61, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1485,7 +1485,7 @@ static struct sci_port sci_ports[] = { .iotype = UPIO_MEM, .irq = 62, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, @@ -1499,7 +1499,7 @@ static struct sci_port sci_ports[] = { .iotype = UPIO_MEM, .irq = 63, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 2, }, .type = PORT_SCIF, @@ -1514,7 +1514,7 @@ static struct sci_port sci_ports[] = { .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1528,7 +1528,7 @@ static struct sci_port sci_ports[] = { .iotype = UPIO_MEM, .irq = 79, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, From 620739025b94fe472c845ce013bff62716d3c576 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Feb 2006 11:11:20 +0000 Subject: [PATCH 3/8] [SERIAL] Remove unnecessary serial.h include imx.c does not use anything from serial.h, so remove it. Signed-off-by: Russell King --- arch/arm/mach-imx/mx1ads.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index dc31e3fd6c57..8ab1b040288c 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -27,7 +27,6 @@ #include #include #include "generic.h" -#include static struct resource cs89x0_resources[] = { [0] = { From f5968b37b3ad35b682b574b578843a0361218aff Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 8 Feb 2006 21:34:35 +0000 Subject: [PATCH 4/8] [SERIAL] 8250 serial console update uart_8250_port ier On some embedded PowerPC (MPC834x) systems an extra byte would some times be required to flush data out of the fifo. serial8250_console_write() was updating the IER in hardware without also updating the copy in uart_8250_port. This causes issues functions like serial8250_start_tx() and __stop_tx() to misbehave. Signed-off-by: Kumar Gala Signed-off-by: Russell King --- drivers/serial/8250.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 179c1f065e60..b1fc97d5f643 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2229,6 +2229,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * and restore the IER */ wait_for_xmitr(up, BOTH_EMPTY); + up->ier |= UART_IER_THRI; serial_out(up, UART_IER, ier | UART_IER_THRI); } From deb37bb7a94c052140d1461a09b877a00e7e2476 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 8 Feb 2006 21:36:28 +0000 Subject: [PATCH 5/8] [SERIAL] Fix compile error in 8250_au1x00.c The DB1550 actually doesn't have a UART2. Remove it from the list. Signed-off-by: Jordan Crouse Signed-off-by: Russell King --- drivers/serial/8250_au1x00.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c index 06ae8fbcc947..8d8d7a70d03e 100644 --- a/drivers/serial/8250_au1x00.c +++ b/drivers/serial/8250_au1x00.c @@ -56,7 +56,6 @@ static struct plat_serial8250_port au1x00_data[] = { #elif defined(CONFIG_SOC_AU1550) PORT(UART0_ADDR, AU1550_UART0_INT), PORT(UART1_ADDR, AU1550_UART1_INT), - PORT(UART2_ADDR, AU1550_UART2_INT), PORT(UART3_ADDR, AU1550_UART3_INT), #elif defined(CONFIG_SOC_AU1200) PORT(UART0_ADDR, AU1200_UART0_INT), From 76a55431cc7237f018c7c667860d60e2b6427bf1 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 8 Feb 2006 21:40:13 +0000 Subject: [PATCH 6/8] [SERIAL] PPC32 CPM_UART: update to utilize the new TTY flip API This replaces old direct usage of tty->flip stuff with relative flip API calls. Signed-off-by: Vitaly Bordug Signed-off-by: Russell King --- drivers/serial/cpm_uart/cpm_uart_core.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 3d80846e384a..b7bf4c698a47 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -252,12 +252,9 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) /* If we have not enough room in tty flip buffer, then we try * later, which will be the next rx-interrupt or a timeout */ - if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) { - tty->flip.work.func((void *)tty); - if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) { - printk(KERN_WARNING "TTY_DONT_FLIP set\n"); - return; - } + if(tty_buffer_request_room(tty, i) < i) { + printk(KERN_WARNING "No room in flip buffer\n"); + return; } /* get pointer */ @@ -276,9 +273,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) continue; error_return: - *tty->flip.char_buf_ptr++ = ch; - *tty->flip.flag_buf_ptr++ = flg; - tty->flip.count++; + tty_insert_flip_char(tty, ch, flg); } /* End while (i--) */ From 7369a8b39ce4be117b0f12bda4e34a1d1789dfe3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Feb 2006 21:43:03 +0000 Subject: [PATCH 7/8] [SERIAL] ip22zilog: Whitespace cleanup. Signed-off-by: Ralf Baechle Signed-off-by: Russell King --- drivers/serial/dz.c | 1 + drivers/serial/ip22zilog.c | 8 ++++---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index 5ff1e834792c..ba5541de673b 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -262,6 +262,7 @@ static inline void dz_receive_chars(struct dz_port *dport) } tty_insert_flip_char(tty, ch, flag); ignore_char: + ; } while (status & DZ_DVAL); if (tty) diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 66f117d15065..419dd3cd7862 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -215,7 +215,7 @@ static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) /* Lower and upper byte of baud rate generator divisor. */ write_zsreg(channel, R12, regs[R12]); write_zsreg(channel, R13, regs[R13]); - + /* Now rewrite R14, with BRENAB (if set). */ write_zsreg(channel, R14, regs[R14]); @@ -571,7 +571,7 @@ static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) else clear_bits |= DTR; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ up->curregs[R5] |= set_bits; up->curregs[R5] &= ~clear_bits; write_zsreg(channel, R5, up->curregs[R5]); @@ -654,7 +654,7 @@ static void ip22zilog_enable_ms(struct uart_port *port) if (new_reg != up->curregs[R15]) { up->curregs[R15] = new_reg; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ write_zsreg(channel, R15, up->curregs[R15]); } } @@ -680,7 +680,7 @@ static void ip22zilog_break_ctl(struct uart_port *port, int break_state) if (new_reg != up->curregs[R5]) { up->curregs[R5] = new_reg; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ write_zsreg(channel, R5, up->curregs[R5]); } From 85d1494e5ff8e20a52ce514584ffda4f0265025e Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 8 Feb 2006 21:46:24 +0000 Subject: [PATCH 8/8] [SERIAL] 8250_pci: add new PCI serial card support This patch adds new PCI serial card support. Signed-off-by: Yoichi Yuasa Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 4 ++++ include/linux/pci_ids.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index bb9ec28ccc2b..94886c000d2a 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1882,6 +1882,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, pbn_b0_4_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_AFAVLAB, + PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, + pbn_b0_4_1152000 }, { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 92a619ba163f..7a61ccdcbc4b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1832,6 +1832,7 @@ #define PCI_VENDOR_ID_AFAVLAB 0x14db #define PCI_DEVICE_ID_AFAVLAB_P028 0x2180 #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 +#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 #define PCI_VENDOR_ID_BROADCOM 0x14e4 #define PCI_DEVICE_ID_TIGON3_5752 0x1600