From 48ff3e04ffd5e1b578462eb1958f15ca122c7fbf Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:04:04 +0900
Subject: [PATCH 01/15] sh: Handle ioport_map() cases for >= P1SEG addresses.

This fixes up the case where certain drivers already do their own
remapping and subsequently attempt to use the PIO calls for I/O. In this
case there is no additional remapping that needs to be done, and the
address can be casted in to the cookie directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/io_generic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 4ff507239286..b8fa6524760a 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -147,6 +147,9 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 {
+	if (PXSEG(addr) >= P1SEG)
+		return (void __iomem *)addr;
+
 	return (void __iomem *)(addr + generic_io_base);
 }
 

From d44ee12ad61ff7aa7a6344560bd430cb72fcbc27 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:05:41 +0900
Subject: [PATCH 02/15] sh: Set the default I/O port base to P2SEG.

This bumps up the default I/O base to P2SEG, which allows legacy probing
to bail out gracefully rather than oopsing. Platforms that have a real
PIO offset still need to fix this up on their own, although most
platforms are content with P2SEG already.

The previous change to teach ioport_map() about >= P1SEG offsets in
combination with this patch allows both the already remapped and the
legacy address probing to pass through and succeed.

Fixes up an oops with i8042 on the sh7785lcr board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machvec.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 548f6607fd0f..cbce639b108a 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <asm/machvec.h>
 #include <asm/sections.h>
+#include <asm/addrspace.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -133,4 +134,6 @@ void __init sh_mv_setup(void)
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
+
+	__set_io_port_base(P2SEG);
 }

From 421f7a5dbdd1720c718eed187c46cf202529cf7d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 26 Sep 2009 19:44:05 +0000
Subject: [PATCH 03/15] sh: Don't enable interrupts in the page fault path

There's already code in do_page_fault() to conditionally enable
interrupts, so we don't need to unconditonally enable them before
calling it. This fixes a lockdep warning where we called
trace_hardirqs_off() but with irqs still enabled.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 0151933e5253..bb407ef0b91e 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -152,8 +152,6 @@ call_do_page_fault:
 	mov.l	1f, r0
 	mov.l	@r0, r6
 
-	sti
-
 	mov.l	3f, r0
 	mov.l	4f, r1
 	mov	r15, r4

From fe1dbfd3f992d5432d7463a5bd6c2fc96d3eccd8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:22:10 +0900
Subject: [PATCH 04/15] sh: magicpanelr2 and dreamcast can use the generic I/O
 base.

There is now no need for the magicpanelr2 and dreamcast platforms to set
their own I/O port bas values, given that the generic machvec code now
sets this to P2SEG for everyone.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-magicpanelr2.c   | 2 --
 arch/sh/boards/mach-dreamcast/setup.c | 2 --
 2 files changed, 4 deletions(-)

diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 0a37c8bfc959..99ffc5f1c0dd 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -205,8 +205,6 @@ static void __init setup_port_multiplexing(void)
 
 static void __init mpr2_setup(char **cmdline_p)
 {
-	__set_io_port_base(0xa0000000);
-
 	/* set Pin Select Register A:
 	 * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
 	 * /IOIS16,  IRQ4,	IRQ5,	  USB1d_SUSPEND
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index ebe99227d4e6..a4b7402d6176 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -42,8 +42,6 @@ static void __init dreamcast_setup(char **cmdline_p)
 	/* Acknowledge any previous events */
 	/* XXX */
 
-	__set_io_port_base(0xa0000000);
-
 	/* Assign all virtual IRQs to the System ASIC int. handler */
 	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
 		set_irq_chip_and_handler(i, &systemasic_int,

From 8810e0553fec6ff0a0db1431e388de39e2a2a512 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 28 Sep 2009 08:21:41 +0000
Subject: [PATCH 05/15] sh: mach-ecovec24: Add TouchScreen support

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 42 ++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5f9881e16e2f..52912a6149c7 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
 #include <linux/input.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -376,6 +377,43 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -590,6 +628,10 @@ static int __init arch_setup(void)
 		 */
 		gpio_request(GPIO_PTF4, NULL);
 		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
 	}
 
 	/* enable CEU0 */

From d5ce010c0327dee0a08a791827156ba84c544eea Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 30 Sep 2009 00:50:30 +0000
Subject: [PATCH 06/15] sh: mach-ecovec24: modify 1st MTD area to read only

Tested-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 52912a6149c7..0fb665d28603 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -71,7 +71,7 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name = "boot loader",
 		.offset = 0,
 		.size = (5 * 1024 * 1024),
-		.mask_flags = MTD_CAP_ROM,
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
 	}, {
 		.name = "free-area",
 		.offset = MTDPART_OFS_APPEND,

From 8406638ab041b3f1ab3d49d6fe1989e25f3ffcad Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 30 Sep 2009 14:02:42 +0900
Subject: [PATCH 07/15] sh: Disable unaligned kernel access printks by default.

Certain networking and USB workloads generate floods of these accesses,
so just disable it by default (thereby restoring the old behaviour). The
option remains configurable from userspace, and can still be used as a
debugging aid.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 69bb1652eccd..e0b5e4b5accd 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -54,8 +54,8 @@ static unsigned long se_multi;
 /* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
    valid! */
 static int se_usermode = 3;
-/* 0: no warning 1: print a warning message */
-static int se_kernmode_warn = 1;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
 
 #ifdef CONFIG_PROC_FS
 static const char *se_usermode_action[] = {

From f16bf3e2e4076d4c20d9344d51fc6c4e43542e97 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Wed, 30 Sep 2009 06:17:34 +0000
Subject: [PATCH 08/15] sh: Build fix: export __movmem

ERROR: "__movmem" [net/irda/irda.ko] undefined!
ERROR: "__movmem" [fs/nfsd/nfsd.ko] undefined!
ERROR: "__movmem" [fs/lockd/lockd.ko] undefined!
ERROR: "__movmem" [crypto/sha1_generic.ko] undefined!

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms_32.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8dbe26b17c44..86c270428357 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -84,6 +84,7 @@ DECLARE_EXPORT(__movstrSI60);
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);

From 9c472c4dd892b75c19d13b8fdbe35fbb09bdbd0d Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 2 Oct 2009 07:52:20 +0000
Subject: [PATCH 09/15] sh: mach-ecovec24: Document DS2 switch settings.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 0fb665d28603..bbc7859433b6 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -39,6 +39,20 @@
  *  0x1800_0000  MFI              16bit
  */
 
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
 /* Heartbeat */
 static unsigned char led_pos[] = { 0, 1, 2, 3 };
 static struct heartbeat_data heartbeat_data = {

From 59c82d12aa898c2f373b7e44bdea0b7c762ceccc Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 30 Sep 2009 11:57:24 +0000
Subject: [PATCH 10/15] usb: r8a66597-udc unaligned fifo fix

Rework the r8a66597-udc fifo code to avoid unaligned accesses.

Without this patch unaligned exceptions will degrade the
USB performance. The exceptions come from the fact that
the usb fifo data buffers may be misaligned.

This patch updates the fifo access code to only use
insl()/outsl() and insw()/outsw() in the case of properly
aligned data buffers. The fallback case is that inl()/inw()
are used for misaligned buffer reads together with outb()
that is used for misaligned buffer writes.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/usb/gadget/r8a66597-udc.h | 101 ++++++++++++++++++------------
 1 file changed, 60 insertions(+), 41 deletions(-)

diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 03087e7b9190..9a537aa07968 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -131,31 +131,48 @@ static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
-				      unsigned long offset, u16 *buf,
+				      unsigned long offset,
+				      unsigned char *buf,
 				      int len)
 {
+	unsigned long fifoaddr = r8a66597->reg + offset;
+	unsigned int data;
+	int i;
+
 	if (r8a66597->pdata->on_chip) {
-		unsigned long fifoaddr = r8a66597->reg + offset;
-		unsigned long count;
-		union {
-			unsigned long dword;
-			unsigned char byte[4];
-		} data;
-		unsigned char *pb;
-		int i;
+		/* 32-bit accesses for on_chip controllers */
 
-		count = len / 4;
-		insl(fifoaddr, buf, count);
+		/* aligned buf case */
+		if (len >= 4 && !((unsigned long)buf & 0x03)) {
+			insl(fifoaddr, buf, len / 4);
+			buf += len & ~0x03;
+			len &= 0x03;
+		}
 
-		if (len & 0x00000003) {
-			data.dword = inl(fifoaddr);
-			pb = (unsigned char *)buf + count * 4;
-			for (i = 0; i < (len & 0x00000003); i++)
-				pb[i] = data.byte[i];
+		/* unaligned buf case */
+		for (i = 0; i < len; i++) {
+			if (!(i & 0x03))
+				data = inl(fifoaddr);
+
+			buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
 		}
 	} else {
-		len = (len + 1) / 2;
-		insw(r8a66597->reg + offset, buf, len);
+		/* 16-bit accesses for external controllers */
+
+		/* aligned buf case */
+		if (len >= 2 && !((unsigned long)buf & 0x01)) {
+			insw(fifoaddr, buf, len / 2);
+			buf += len & ~0x01;
+			len &= 0x01;
+		}
+
+		/* unaligned buf case */
+		for (i = 0; i < len; i++) {
+			if (!(i & 0x01))
+				data = inw(fifoaddr);
+
+			buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
+		}
 	}
 }
 
@@ -166,38 +183,40 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
-				       unsigned long offset, u16 *buf,
+				       unsigned long offset,
+				       unsigned char *buf,
 				       int len)
 {
 	unsigned long fifoaddr = r8a66597->reg + offset;
+	int adj = 0;
+	int i;
 
 	if (r8a66597->pdata->on_chip) {
-		unsigned long count;
-		unsigned char *pb;
-		int i;
-
-		count = len / 4;
-		outsl(fifoaddr, buf, count);
-
-		if (len & 0x00000003) {
-			pb = (unsigned char *)buf + count * 4;
-			for (i = 0; i < (len & 0x00000003); i++) {
-				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-					outb(pb[i], fifoaddr + i);
-				else
-					outb(pb[i], fifoaddr + 3 - i);
-			}
+		/* 32-bit access only if buf is 32-bit aligned */
+		if (len >= 4 && !((unsigned long)buf & 0x03)) {
+			outsl(fifoaddr, buf, len / 4);
+			buf += len & ~0x03;
+			len &= 0x03;
 		}
 	} else {
-		int odd = len & 0x0001;
-
-		len = len / 2;
-		outsw(fifoaddr, buf, len);
-		if (unlikely(odd)) {
-			buf = &buf[len];
-			outb((unsigned char)*buf, fifoaddr);
+		/* 16-bit access only if buf is 16-bit aligned */
+		if (len >= 2 && !((unsigned long)buf & 0x01)) {
+			outsw(fifoaddr, buf, len / 2);
+			buf += len & ~0x01;
+			len &= 0x01;
 		}
 	}
+
+	/* adjust fifo address in the little endian case */
+	if (!(r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)) {
+		if (r8a66597->pdata->on_chip)
+			adj = 0x03; /* 32-bit wide */
+		else
+			adj = 0x01; /* 16-bit wide */
+	}
+
+	for (i = 0; i < len; i++)
+		outb(buf[i], fifoaddr + adj - (i & adj));
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,

From f78bab30707e043bc16c5b11ebff794c123f68c1 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 7 Oct 2009 09:00:06 +0000
Subject: [PATCH 11/15] sh: enable sleep state LEDs on Ecovec24

Extend the ecovec24 board code to enable Power
Management LEDs showing the current sh7724 sleep state.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index bbc7859433b6..3b1ceb46fa54 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -512,6 +512,11 @@ static void __init sh_eth_init(void)
 #define IODRIVEA  0xA405018A
 static int __init arch_setup(void)
 {
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
 	/* enable SCIFA0 */
 	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
 	gpio_request(GPIO_FN_SCIF0_RXD, NULL);

From a6325247f50628c7e53a483807d0ef2c24a7aa90 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:21 +0000
Subject: [PATCH 12/15] sh: Sprinkle __uses_jump_to_uncached

Fix some callers of jump_to_uncached() and back_to_cached() that were
not annotated with __uses_jump_to_uncached.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c    | 2 +-
 arch/sh/mm/cache-sh7705.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b2453bbef4cd..a98c7d8984fa 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -43,7 +43,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-static void sh4_flush_icache_range(void *args)
+static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 {
 	struct flusher_data *data = args;
 	unsigned long start, end;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2cadee2037ac..2601935eb589 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args)
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __flush_dcache_page(unsigned long phys)
+static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
 	unsigned long flags;
@@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg)
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-static void sh7705_flush_cache_all(void *args)
+static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
 {
 	unsigned long flags;
 

From fc2bdefdde89b54d8fcde7bbf7d0adc0ce5cb044 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:22 +0000
Subject: [PATCH 13/15] sh: Plug PMB alloc memory leak

If we fail to allocate a PMB entry in pmb_remap() we must remember to
clear and free any PMB entries that we may have previously allocated,
e.g. if we were allocating a multiple entry mapping.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pmb.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index b1a714a92b14..58f935896b44 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -33,6 +33,8 @@
 
 #define NR_PMB_ENTRIES	16
 
+static void __pmb_unmap(struct pmb_entry *);
+
 static struct kmem_cache *pmb_cache;
 static unsigned long pmb_map;
 
@@ -218,9 +220,10 @@ static struct {
 long pmb_remap(unsigned long vaddr, unsigned long phys,
 	       unsigned long size, unsigned long flags)
 {
-	struct pmb_entry *pmbp;
+	struct pmb_entry *pmbp, *pmbe;
 	unsigned long wanted;
 	int pmb_flags, i;
+	long err;
 
 	/* Convert typical pgprot value to the PMB equivalent */
 	if (flags & _PAGE_CACHABLE) {
@@ -236,20 +239,22 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 
 again:
 	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
-		struct pmb_entry *pmbe;
 		int ret;
 
 		if (size < pmb_sizes[i].size)
 			continue;
 
 		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
-		if (IS_ERR(pmbe))
-			return PTR_ERR(pmbe);
+		if (IS_ERR(pmbe)) {
+			err = PTR_ERR(pmbe);
+			goto out;
+		}
 
 		ret = set_pmb_entry(pmbe);
 		if (ret != 0) {
 			pmb_free(pmbe);
-			return -EBUSY;
+			err = -EBUSY;
+			goto out;
 		}
 
 		phys	+= pmb_sizes[i].size;
@@ -270,6 +275,12 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 		goto again;
 
 	return wanted - size;
+
+out:
+	if (pmbp)
+		__pmb_unmap(pmbp);
+
+	return err;
 }
 
 void pmb_unmap(unsigned long addr)
@@ -283,12 +294,19 @@ void pmb_unmap(unsigned long addr)
 	if (unlikely(!pmbe))
 		return;
 
+	__pmb_unmap(pmbe);
+}
+
+static void __pmb_unmap(struct pmb_entry *pmbe)
+{
 	WARN_ON(!test_bit(pmbe->entry, &pmb_map));
 
 	do {
 		struct pmb_entry *pmblink = pmbe;
 
-		clear_pmb_entry(pmbe);
+		if (pmbe->entry != PMB_NO_ENTRY)
+			clear_pmb_entry(pmbe);
+
 		pmbe = pmblink->link;
 
 		pmb_free(pmblink);

From 2bea7ea7d57fd0022f4cd08ed3d4eb2d39a2920d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:27 +0000
Subject: [PATCH 14/15] sh: Try PMB mapping based on physical address, not
 mapping size

We should favour PMB mappings when the physical address cannot be
reached with 29-bits.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/ioremap_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index c3250614e3ae..a86eaa9d75a5 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -83,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	 *
 	 * PMB entries are all pre-faulted.
 	 */
-	if (unlikely(size >= 0x1000000)) {
+	if (unlikely(phys_addr >= P1SEG)) {
 		unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
 
 		if (likely(mapped)) {

From a2767cfb1d9d97c3f861743f1ad595a80b75ec99 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:34 +0000
Subject: [PATCH 15/15] sh: Don't allocate smaller sized mappings on every
 iteration

Currently, we've got the less than ideal situation where if we need to
allocate a 256MB mapping we'll allocate four entries like so,

	 entry 1: 128MB
	 entry 2:  64MB
	 entry 3:  16MB
	 entry 4:  16MB

This is because as we execute the loop in pmb_remap() we will
progressively try mapping the remaining address space with smaller and
smaller sizes. This isn't good because the size we use on one iteration
may be the perfect size to use on the next iteration, for instance when
the initial size is divisible by one of the PMB mapping sizes.

With this patch, we now only need two entries in the PMB to map 256MB of
address space,

	  entry 1: 128MB
	  entry 2: 128MB

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pmb.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 58f935896b44..aade31102112 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -269,6 +269,13 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 			pmbp->link = pmbe;
 
 		pmbp = pmbe;
+
+		/*
+		 * Instead of trying smaller sizes on every iteration
+		 * (even if we succeed in allocating space), try using
+		 * pmb_sizes[i].size again.
+		 */
+		i--;
 	}
 
 	if (size >= 0x1000000)