From 271f193d739f894a7d1229c2cbb72d2f8b847544 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 3 May 2013 18:04:24 -0300 Subject: [PATCH 01/12] ASoC: sgtl5000: Fix comment about register addresses The list below the comment relates to sgtl5000 registers addresses, so change the comment to improve the description. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h index 8a9f43534b79..4b69229a9818 100644 --- a/sound/soc/codecs/sgtl5000.h +++ b/sound/soc/codecs/sgtl5000.h @@ -12,7 +12,7 @@ #define _SGTL5000_H /* - * Register values. + * Registers addresses */ #define SGTL5000_CHIP_ID 0x0000 #define SGTL5000_CHIP_DIG_POWER 0x0002 From e5d80e82e32e4cb66d67a56352e5a594e2a35cd0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 4 May 2013 15:39:34 -0300 Subject: [PATCH 02/12] ASoC: sgtl5000: Convert to use regmap directly Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 145 +++++++++++++++++++++++++++--------- 1 file changed, 111 insertions(+), 34 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 92bbfec9b107..327b4434b4ce 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -34,30 +35,30 @@ #define SGTL5000_MAX_REG_OFFSET 0x013A /* default value of sgtl5000 registers */ -static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET] = { - [SGTL5000_CHIP_CLK_CTRL] = 0x0008, - [SGTL5000_CHIP_I2S_CTRL] = 0x0010, - [SGTL5000_CHIP_SSS_CTRL] = 0x0008, - [SGTL5000_CHIP_DAC_VOL] = 0x3c3c, - [SGTL5000_CHIP_PAD_STRENGTH] = 0x015f, - [SGTL5000_CHIP_ANA_HP_CTRL] = 0x1818, - [SGTL5000_CHIP_ANA_CTRL] = 0x0111, - [SGTL5000_CHIP_LINE_OUT_VOL] = 0x0404, - [SGTL5000_CHIP_ANA_POWER] = 0x7060, - [SGTL5000_CHIP_PLL_CTRL] = 0x5000, - [SGTL5000_DAP_BASS_ENHANCE] = 0x0040, - [SGTL5000_DAP_BASS_ENHANCE_CTRL] = 0x051f, - [SGTL5000_DAP_SURROUND] = 0x0040, - [SGTL5000_DAP_EQ_BASS_BAND0] = 0x002f, - [SGTL5000_DAP_EQ_BASS_BAND1] = 0x002f, - [SGTL5000_DAP_EQ_BASS_BAND2] = 0x002f, - [SGTL5000_DAP_EQ_BASS_BAND3] = 0x002f, - [SGTL5000_DAP_EQ_BASS_BAND4] = 0x002f, - [SGTL5000_DAP_MAIN_CHAN] = 0x8000, - [SGTL5000_DAP_AVC_CTRL] = 0x0510, - [SGTL5000_DAP_AVC_THRESHOLD] = 0x1473, - [SGTL5000_DAP_AVC_ATTACK] = 0x0028, - [SGTL5000_DAP_AVC_DECAY] = 0x0050, +static const struct reg_default sgtl5000_reg_defaults[] = { + { SGTL5000_CHIP_CLK_CTRL, 0x0008 }, + { SGTL5000_CHIP_I2S_CTRL, 0x0010 }, + { SGTL5000_CHIP_SSS_CTRL, 0x0008 }, + { SGTL5000_CHIP_DAC_VOL, 0x3c3c }, + { SGTL5000_CHIP_PAD_STRENGTH, 0x015f }, + { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 }, + { SGTL5000_CHIP_ANA_CTRL, 0x0111 }, + { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 }, + { SGTL5000_CHIP_ANA_POWER, 0x7060 }, + { SGTL5000_CHIP_PLL_CTRL, 0x5000 }, + { SGTL5000_DAP_BASS_ENHANCE, 0x0040 }, + { SGTL5000_DAP_BASS_ENHANCE_CTRL, 0x051f }, + { SGTL5000_DAP_SURROUND, 0x0040 }, + { SGTL5000_DAP_EQ_BASS_BAND0, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND1, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND2, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND3, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f }, + { SGTL5000_DAP_MAIN_CHAN, 0x8000 }, + { SGTL5000_DAP_AVC_CTRL, 0x0510 }, + { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 }, + { SGTL5000_DAP_AVC_ATTACK, 0x0028 }, + { SGTL5000_DAP_AVC_DECAY, 0x0050 }, }; /* regulator supplies for sgtl5000, VDDD is an optional external supply */ @@ -112,6 +113,7 @@ struct sgtl5000_priv { int fmt; /* i2s data format */ struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM]; struct ldo_regulator *ldo; + struct regmap *regmap; }; /* @@ -958,17 +960,76 @@ static struct snd_soc_dai_driver sgtl5000_dai = { .symmetric_rates = 1, }; -static int sgtl5000_volatile_register(struct snd_soc_codec *codec, - unsigned int reg) +static bool sgtl5000_volatile(struct device *dev, unsigned int reg) { switch (reg) { case SGTL5000_CHIP_ID: case SGTL5000_CHIP_ADCDAC_CTRL: case SGTL5000_CHIP_ANA_STATUS: - return 1; + return true; } - return 0; + return false; +} + +static bool sgtl5000_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SGTL5000_CHIP_ID: + case SGTL5000_CHIP_DIG_POWER: + case SGTL5000_CHIP_CLK_CTRL: + case SGTL5000_CHIP_I2S_CTRL: + case SGTL5000_CHIP_SSS_CTRL: + case SGTL5000_CHIP_ADCDAC_CTRL: + case SGTL5000_CHIP_DAC_VOL: + case SGTL5000_CHIP_PAD_STRENGTH: + case SGTL5000_CHIP_ANA_ADC_CTRL: + case SGTL5000_CHIP_ANA_HP_CTRL: + case SGTL5000_CHIP_ANA_CTRL: + case SGTL5000_CHIP_LINREG_CTRL: + case SGTL5000_CHIP_REF_CTRL: + case SGTL5000_CHIP_MIC_CTRL: + case SGTL5000_CHIP_LINE_OUT_CTRL: + case SGTL5000_CHIP_LINE_OUT_VOL: + case SGTL5000_CHIP_ANA_POWER: + case SGTL5000_CHIP_PLL_CTRL: + case SGTL5000_CHIP_CLK_TOP_CTRL: + case SGTL5000_CHIP_ANA_STATUS: + case SGTL5000_CHIP_SHORT_CTRL: + case SGTL5000_CHIP_ANA_TEST2: + case SGTL5000_DAP_CTRL: + case SGTL5000_DAP_PEQ: + case SGTL5000_DAP_BASS_ENHANCE: + case SGTL5000_DAP_BASS_ENHANCE_CTRL: + case SGTL5000_DAP_AUDIO_EQ: + case SGTL5000_DAP_SURROUND: + case SGTL5000_DAP_FLT_COEF_ACCESS: + case SGTL5000_DAP_COEF_WR_B0_MSB: + case SGTL5000_DAP_COEF_WR_B0_LSB: + case SGTL5000_DAP_EQ_BASS_BAND0: + case SGTL5000_DAP_EQ_BASS_BAND1: + case SGTL5000_DAP_EQ_BASS_BAND2: + case SGTL5000_DAP_EQ_BASS_BAND3: + case SGTL5000_DAP_EQ_BASS_BAND4: + case SGTL5000_DAP_MAIN_CHAN: + case SGTL5000_DAP_MIX_CHAN: + case SGTL5000_DAP_AVC_CTRL: + case SGTL5000_DAP_AVC_THRESHOLD: + case SGTL5000_DAP_AVC_ATTACK: + case SGTL5000_DAP_AVC_DECAY: + case SGTL5000_DAP_COEF_WR_B1_MSB: + case SGTL5000_DAP_COEF_WR_B1_LSB: + case SGTL5000_DAP_COEF_WR_B2_MSB: + case SGTL5000_DAP_COEF_WR_B2_LSB: + case SGTL5000_DAP_COEF_WR_A1_MSB: + case SGTL5000_DAP_COEF_WR_A1_LSB: + case SGTL5000_DAP_COEF_WR_A2_MSB: + case SGTL5000_DAP_COEF_WR_A2_LSB: + return true; + + default: + return false; + } } #ifdef CONFIG_SUSPEND @@ -1300,7 +1361,8 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); /* setup i2c data ops */ - ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C); + codec->control_data = sgtl5000->regmap; + ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP); if (ret < 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); return ret; @@ -1391,11 +1453,6 @@ static struct snd_soc_codec_driver sgtl5000_driver = { .suspend = sgtl5000_suspend, .resume = sgtl5000_resume, .set_bias_level = sgtl5000_set_bias_level, - .reg_cache_size = ARRAY_SIZE(sgtl5000_regs), - .reg_word_size = sizeof(u16), - .reg_cache_step = 2, - .reg_cache_default = sgtl5000_regs, - .volatile_register = sgtl5000_volatile_register, .controls = sgtl5000_snd_controls, .num_controls = ARRAY_SIZE(sgtl5000_snd_controls), .dapm_widgets = sgtl5000_dapm_widgets, @@ -1404,6 +1461,19 @@ static struct snd_soc_codec_driver sgtl5000_driver = { .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes), }; +static const struct regmap_config sgtl5000_regmap = { + .reg_bits = 16, + .val_bits = 16, + + .max_register = SGTL5000_MAX_REG_OFFSET, + .volatile_reg = sgtl5000_volatile, + .readable_reg = sgtl5000_readable, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = sgtl5000_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults), +}; + static int sgtl5000_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1415,6 +1485,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, if (!sgtl5000) return -ENOMEM; + sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap); + if (IS_ERR(sgtl5000->regmap)) { + ret = PTR_ERR(sgtl5000->regmap); + dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + i2c_set_clientdata(client, sgtl5000); ret = snd_soc_register_codec(&client->dev, From 29f421c2107f28976dacc9f1fca4bbfebee5b10f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 24 Apr 2013 13:23:14 -0300 Subject: [PATCH 03/12] ASoC: mxs-sgtl5000: Remove unneeded 'ret' variable Variable 'ret' is not needed here, so just remove it. Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-sgtl5000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index b1d9b5ebeeeb..4f74b051f73a 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -116,7 +116,7 @@ static int mxs_sgtl5000_probe_dt(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct device_node *saif_np[2], *codec_np; - int i, ret = 0; + int i; if (!np) return 1; /* no device tree */ @@ -142,7 +142,7 @@ static int mxs_sgtl5000_probe_dt(struct platform_device *pdev) of_node_put(saif_np[0]); of_node_put(saif_np[1]); - return ret; + return 0; } static int mxs_sgtl5000_probe(struct platform_device *pdev) From 24279dcee5456bb141a1ca007a3f0abe02bf91d0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 24 Apr 2013 13:23:15 -0300 Subject: [PATCH 04/12] ASoC: mxs-sgtl5000: Remove unneeded fields from snd_soc_dai_link It makes no sense to hardcode the I2C bus into the codec_name field. cpu_dai_name and platform_name are also overwritten later in mxs_sgtl5000_probe_dt(). So remove the three fields, as mxs platform is dt-only platform. Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-sgtl5000.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index 4f74b051f73a..1b134d72f120 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -90,17 +90,11 @@ static struct snd_soc_dai_link mxs_sgtl5000_dai[] = { .name = "HiFi Tx", .stream_name = "HiFi Playback", .codec_dai_name = "sgtl5000", - .codec_name = "sgtl5000.0-000a", - .cpu_dai_name = "mxs-saif.0", - .platform_name = "mxs-saif.0", .ops = &mxs_sgtl5000_hifi_ops, }, { .name = "HiFi Rx", .stream_name = "HiFi Capture", .codec_dai_name = "sgtl5000", - .codec_name = "sgtl5000.0-000a", - .cpu_dai_name = "mxs-saif.1", - .platform_name = "mxs-saif.1", .ops = &mxs_sgtl5000_hifi_ops, }, }; From b871f1ad3c8a1ac2fb862f9261f14a67dc2c7b7d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 9 May 2013 21:15:46 -0300 Subject: [PATCH 05/12] ASoC: sgtl5000: Read SGTL5000_CHIP_ID in i2c_probe() The usual place for reading chip ID is inside i2c_probe, so move it there and also convert it to regmap. sgtl5000_enable_regulators() needs to read the chip revision, so keep the revision check there. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 39 +++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 327b4434b4ce..1ab356ab0f31 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1275,7 +1275,7 @@ static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec) static int sgtl5000_enable_regulators(struct snd_soc_codec *codec) { - u16 reg; + int reg; int ret; int rev; int i; @@ -1303,23 +1303,17 @@ static int sgtl5000_enable_regulators(struct snd_soc_codec *codec) /* wait for all power rails bring up */ udelay(10); - /* read chip information */ - reg = snd_soc_read(codec, SGTL5000_CHIP_ID); - if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != - SGTL5000_PARTID_PART_ID) { - dev_err(codec->dev, - "Device with ID register %x is not a sgtl5000\n", reg); - ret = -ENODEV; - goto err_regulator_disable; - } - - rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; - dev_info(codec->dev, "sgtl5000 revision 0x%x\n", rev); - /* * workaround for revision 0x11 and later, * roll back to use internal LDO */ + + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); + if (ret) + goto err_regulator_disable; + + rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; + if (external_vddd && rev >= 0x11) { /* disable all regulator first */ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), @@ -1478,7 +1472,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct sgtl5000_priv *sgtl5000; - int ret; + int ret, reg, rev; sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), GFP_KERNEL); @@ -1492,6 +1486,21 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, return ret; } + /* read chip information */ + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); + if (ret) + return ret; + + if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != + SGTL5000_PARTID_PART_ID) { + dev_err(&client->dev, + "Device with ID register %x is not a sgtl5000\n", reg); + return -ENODEV; + } + + rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; + dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); + i2c_set_clientdata(client, sgtl5000); ret = snd_soc_register_codec(&client->dev, From af8ee11209e749c75eabf32b2a4ca631f396acf8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 9 May 2013 21:15:47 -0300 Subject: [PATCH 06/12] ASoC: sgtl5000: Fix driver probe after reset After a 'reboot' command in Linux or after pressing the system's reset button the sgtl5000 driver fails to probe: sgtl5000 0-000a: Device with ID register ffff is not a sgtl5000 sgtl5000 0-000a: ASoC: failed to probe CODEC -19 imx-sgtl5000 sound.12: ASoC: failed to instantiate card -19 imx-sgtl5000 sound.12: snd_soc_register_card failed (-19) sgtl5000 codec does not have a reset line, nor a reset command in software, so after a system reset the codec does not contain the default register values from sgtl5000_reg_defaults[] anymore, as these are only valid after a power-on-reset cycle. Fix this issue by explicitly reading all the reset register values from sgtl5000_reg_defaults[] and writing them back into sgtl5000 to ensure a sane state. Signed-off-by: Fabio Estevam Tested-by: Eric Nelson Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1ab356ab0f31..1c3b20fc7ec3 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1468,6 +1468,31 @@ static const struct regmap_config sgtl5000_regmap = { .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults), }; +/* + * Write all the default values from sgtl5000_reg_defaults[] array into the + * sgtl5000 registers, to make sure we always start with the sane registers + * values as stated in the datasheet. + * + * Since sgtl5000 does not have a reset line, nor a reset command in software, + * we follow this approach to guarantee we always start from the default values + * and avoid problems like, not being able to probe after an audio playback + * followed by a system reset or a 'reboot' command in Linux + */ +static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000) +{ + int i, ret, val, index; + + for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) { + val = sgtl5000_reg_defaults[i].def; + index = sgtl5000_reg_defaults[i].reg; + ret = regmap_write(sgtl5000->regmap, index, val); + if (ret) + return ret; + } + + return 0; +} + static int sgtl5000_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1503,6 +1528,11 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, i2c_set_clientdata(client, sgtl5000); + /* Ensure sgtl5000 will start with sane register values */ + ret = sgtl5000_fill_defaults(sgtl5000); + if (ret) + return ret; + ret = snd_soc_register_codec(&client->dev, &sgtl5000_driver, &sgtl5000_dai, 1); return ret; From dd4d2d6dfb49e8916064f2cb07f0ad7b32a82fb7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 28 May 2013 20:55:56 +0200 Subject: [PATCH 07/12] ASoC: sgtl5000: Fix VAG_POWER enabling/disabling order The VAG_POWER must be enabled after all other bits in CHIP_ANA_POWER and disabled before any other bit in CHIP_ANA_POWER. See the SGTL5000 datasheet (Table 31, BIT 7, page 42-43). Failing to follow this order will result in ugly loud "POP" noise at the end of playback. To achieve such order, use the _PRE and _POST DAPM widgets to trigger the power_vag_event, where the event type check has to be fixed accordingly as well. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1c3b20fc7ec3..b4297416401e 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -153,12 +153,12 @@ static int power_vag_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { switch (event) { - case SND_SOC_DAPM_PRE_PMU: + case SND_SOC_DAPM_POST_PMU: snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); break; - case SND_SOC_DAPM_POST_PMD: + case SND_SOC_DAPM_PRE_PMD: snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, 0); msleep(400); @@ -219,12 +219,11 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { 0, SGTL5000_CHIP_DIG_POWER, 1, 0), - SND_SOC_DAPM_SUPPLY("VAG_POWER", SGTL5000_CHIP_ANA_POWER, 7, 0, - power_vag_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), - SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0), SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0), + + SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event), + SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event), }; /* routes for sgtl5000 */ @@ -232,16 +231,13 @@ static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = { {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */ {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */ - {"ADC", NULL, "VAG_POWER"}, {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */ - {"DAC", NULL, "VAG_POWER"}, {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */ {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ {"LO", NULL, "DAC"}, /* dac --> line_out */ - {"LINE_IN", NULL, "VAG_POWER"}, {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */ From 2bdc1bb2b4e1f517d8aa5bbbad9cb6ccac8a94fb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 3 Jun 2013 10:20:39 +0100 Subject: [PATCH 08/12] ASoC: sgtl5000: Make device cache only when powered off When the regulators have been disabled mark the device as cache only so that we don't try to interact with the hardware. Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index b4297416401e..c8f2afb74706 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -907,10 +907,25 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, if (ret) return ret; udelay(10); + + regcache_cache_only(sgtl5000->regmap, false); + + ret = regcache_sync(sgtl5000->regmap); + if (ret != 0) { + dev_err(codec->dev, + "Failed to restore cache: %d\n", ret); + + regcache_cache_only(sgtl5000->regmap, true); + regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + + return ret; + } } break; case SND_SOC_BIAS_OFF: + regcache_cache_only(sgtl5000->regmap, true); regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); break; From 9e13f345887c179068bbc1f7389b7177bf88f57e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 9 Jun 2013 22:07:46 -0300 Subject: [PATCH 09/12] ASoC: sgtl5000: Let the codec acquire its clock On a mx6qsabrelite board the following error happens on probe: sgtl5000: probe of 0-000a failed with error -5 imx-sgtl5000 sound.13: ASoC: CODEC (null) not registered imx-sgtl5000 sound.13: snd_soc_register_card failed (-517) platform sound.13: Driver imx-sgtl5000 requests probe defer Prior to reading the codec ID we need to turn the SYS_MCLK clock, so let's enable the codec clock inside sgtl5000_i2c_probe(). Also remove the codec clock enable/disable functions from the machine driver. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/fsl/imx-sgtl5000.c | 30 +++++++----------------------- 2 files changed, 37 insertions(+), 27 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index c8f2afb74706..2e0227bda8e0 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -114,6 +114,7 @@ struct sgtl5000_priv { struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM]; struct ldo_regulator *ldo; struct regmap *regmap; + struct clk *mclk; }; /* @@ -1522,16 +1523,28 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, return ret; } + sgtl5000->mclk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(sgtl5000->mclk)) { + ret = PTR_ERR(sgtl5000->mclk); + dev_err(&client->dev, "Failed to get mclock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(sgtl5000->mclk); + if (ret) + return ret; + /* read chip information */ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); if (ret) - return ret; + goto disable_clk; if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != SGTL5000_PARTID_PART_ID) { dev_err(&client->dev, "Device with ID register %x is not a sgtl5000\n", reg); - return -ENODEV; + ret = -ENODEV; + goto disable_clk; } rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; @@ -1542,17 +1555,30 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, /* Ensure sgtl5000 will start with sane register values */ ret = sgtl5000_fill_defaults(sgtl5000); if (ret) - return ret; + goto disable_clk; ret = snd_soc_register_codec(&client->dev, &sgtl5000_driver, &sgtl5000_dai, 1); + if (ret) + goto disable_clk; + + return 0; + +disable_clk: + clk_disable_unprepare(sgtl5000->mclk); return ret; } static int sgtl5000_i2c_remove(struct i2c_client *client) { - snd_soc_unregister_codec(&client->dev); + struct sgtl5000_priv *sgtl5000; + sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), + GFP_KERNEL); + if (!sgtl5000) + return -ENOMEM; + snd_soc_unregister_codec(&client->dev); + clk_disable_unprepare(sgtl5000->mclk); return 0; } diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index a60aaa053d28..823151b7653b 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -129,20 +129,10 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) } data->codec_clk = clk_get(&codec_dev->dev, NULL); - if (IS_ERR(data->codec_clk)) { - /* assuming clock enabled by default */ - data->codec_clk = NULL; - ret = of_property_read_u32(codec_np, "clock-frequency", - &data->clk_frequency); - if (ret) { - dev_err(&codec_dev->dev, - "clock-frequency missing or invalid\n"); - goto fail; - } - } else { - data->clk_frequency = clk_get_rate(data->codec_clk); - clk_prepare_enable(data->codec_clk); - } + if (IS_ERR(data->codec_clk)) + goto fail; + + data->clk_frequency = clk_get_rate(data->codec_clk); data->dai.name = "HiFi"; data->dai.stream_name = "HiFi"; @@ -157,10 +147,10 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) data->card.dev = &pdev->dev; ret = snd_soc_of_parse_card_name(&data->card, "model"); if (ret) - goto clk_fail; + goto fail; ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing"); if (ret) - goto clk_fail; + goto fail; data->card.num_links = 1; data->card.owner = THIS_MODULE; data->card.dai_link = &data->dai; @@ -170,7 +160,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) ret = snd_soc_register_card(&data->card); if (ret) { dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); - goto clk_fail; + goto fail; } platform_set_drvdata(pdev, data); @@ -179,8 +169,6 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) return 0; -clk_fail: - clk_put(data->codec_clk); fail: if (ssi_np) of_node_put(ssi_np); @@ -194,10 +182,6 @@ static int imx_sgtl5000_remove(struct platform_device *pdev) { struct imx_sgtl5000_data *data = platform_get_drvdata(pdev); - if (data->codec_clk) { - clk_disable_unprepare(data->codec_clk); - clk_put(data->codec_clk); - } snd_soc_unregister_card(&data->card); return 0; From 7c647af43f1517b5b2604b8a69ea72a17073e15f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Jun 2013 10:24:41 -0300 Subject: [PATCH 10/12] ASoC: sgtl5000: Use i2c_get_clientdata() We should use i2c_get_clientdata() to get the codec private structure. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 2e0227bda8e0..d441559dc92c 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1571,11 +1571,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, static int sgtl5000_i2c_remove(struct i2c_client *client) { - struct sgtl5000_priv *sgtl5000; - sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), - GFP_KERNEL); - if (!sgtl5000) - return -ENOMEM; + struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client); snd_soc_unregister_codec(&client->dev); clk_disable_unprepare(sgtl5000->mclk); From 77845b11a35f293a344fe868852e8c61498ae777 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Jun 2013 10:24:42 -0300 Subject: [PATCH 11/12] ASoC: sgtl5000: Add 'clocks' entry as a required propery Since commit 9e13f345 (ASoC: sgtl5000: Let the codec acquire its clock) , the 'clocks' entry is mandatory, so update the binding doc. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/sgtl5000.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 9cc44449508d..955df60a118c 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -5,9 +5,12 @@ Required properties: - reg : the I2C address of the device +- clocks : the clock provider of SYS_MCLK + Example: codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clocks = <&clks 150>; }; From b9840124d699614f1429748e43827b1fb35c1138 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Jun 2013 13:26:05 -0300 Subject: [PATCH 12/12] ASoC: imx-sgtl5000: Use devm_clk_get() Commit 9e13f345 (ASoC: sgtl5000: Let the codec acquire its clock) removed the clk_put calls. Let's use devm_clk_get() instead, so that we do not need to call them anymore. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/imx-sgtl5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index 823151b7653b..7a8bc1220b2e 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -128,7 +128,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) goto fail; } - data->codec_clk = clk_get(&codec_dev->dev, NULL); + data->codec_clk = devm_clk_get(&codec_dev->dev, NULL); if (IS_ERR(data->codec_clk)) goto fail;