diff --git a/Documentation/devicetree/bindings/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/panel/samsung,ld9040.txt new file mode 100644 index 000000000000..07c36c3f7b52 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/samsung,ld9040.txt @@ -0,0 +1,66 @@ +Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus + +Required properties: + - compatible: "samsung,ld9040" + - reg: address of the panel on SPI bus + - vdd3-supply: core voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin + - display-timings: timings for the connected panel according to [1] + +The panel must obey rules for SPI slave device specified in document [2]. + +Optional properties: + - power-on-delay: delay after turning regulators on [ms] + - reset-delay: delay after reset sequence [ms] + - panel-width-mm: physical panel width [mm] + - panel-height-mm: physical panel height [mm] + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [3]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/video/display-timing.txt +[2]: Documentation/devicetree/bindings/spi/spi-bus.txt +[3]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + lcd@0 { + compatible = "samsung,ld9040"; + reg = <0>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + reset-gpios = <&gpy4 5 0>; + spi-max-frequency = <1200000>; + spi-cpol; + spi-cpha; + power-on-delay = <10>; + reset-delay = <10>; + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt new file mode 100644 index 000000000000..e7ee988e3156 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt @@ -0,0 +1,56 @@ +Samsung S6E8AA0 AMOLED LCD 5.3 inch panel + +Required properties: + - compatible: "samsung,s6e8aa0" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: core voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin + - display-timings: timings for the connected panel as described by [1] + +Optional properties: + - power-on-delay: delay after turning regulators on [ms] + - reset-delay: delay after reset sequence [ms] + - init-delay: delay after initialization sequence [ms] + - panel-width-mm: physical panel width [mm] + - panel-height-mm: physical panel height [mm] + - flip-horizontal: boolean to flip image horizontally + - flip-vertical: boolean to flip image vertically + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [2]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/video/display-timing.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + panel-width-mm = <58>; + panel-height-mm = <103>; + flip-horizontal; + flip-vertical; + + display-timings { + timing0: timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt new file mode 100644 index 000000000000..33b5730d07ba --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt @@ -0,0 +1,80 @@ +Exynos MIPI DSI Master + +Required properties: + - compatible: "samsung,exynos4210-mipi-dsi" + - reg: physical base address and length of the registers set for the device + - interrupts: should contain DSI interrupt + - clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names + - clock-names: should include "bus_clk"and "pll_clk" entries + - phys: list of phy specifiers, must contain an entry for each required + entry in phy-names + - phy-names: should include "dsim" entry + - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) + - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) + - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock + - #address-cells, #size-cells: should be set respectively to <1> and <0> + according to DSI host bindings (see MIPI DSI bindings [1]) + +Optional properties: + - samsung,power-domain: a phandle to DSIM power domain node + +Child nodes: + Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). + +Video interfaces: + Device node can contain video interface port nodes according to [2]. + The following are properties specific to those nodes: + + port node: + - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port; + + endpoint node of DSI port (reg = 1): + - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst + mode + - samsung,esc-clock-frequency: specifies DSI frequency in escape mode + +[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + dsi@11C80000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <0 79 0>; + clocks = <&clock 286>, <&clock 143>; + clock-names = "bus_clk", "pll_clk"; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + samsung,power-domain = <&pd_lcd0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,pll-clock-frequency = <24000000>; + + panel@1 { + reg = <0>; + ... + port { + panel_ep: endpoint { + remote-endpoint = <&dsi_ep>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + dsi_ep: endpoint { + reg = <0>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + remote-endpoint = <&panel_ep>; + }; + }; + }; + }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 08452e183b57..3d14cdb0776a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -104,6 +104,20 @@ reg = <0x10010000 0x400>; }; + dsi_0: dsi@11C80000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <0 79 0>; + samsung,power-domain = <&pd_lcd0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock 286>, <&clock 143>; + clock-names = "bus_clk", "pll_clk"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + camera { compatible = "samsung,fimc", "simple-bus"; status = "disabled"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 63cc571ca307..02c6768f52b4 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -353,6 +353,67 @@ }; }; + dsi_0: dsi@11C80000 { + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "samsung,s6e8aa0"; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + + fimd@11c00000 { + status = "okay"; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 477208d98c6d..0a80a72368d3 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -225,7 +225,6 @@ regulator-name = "VLCD+VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; }; ldo8_reg: LDO8 { @@ -289,7 +288,6 @@ regulator-name = "VCC_3.0V_LCD"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-always-on; }; buck1_reg: BUCK1 { @@ -347,27 +345,66 @@ }; }; + spi-lcd { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpy3 1 0>; + gpio-mosi = <&gpy3 3 0>; + num-chipselects = <1>; + cs-gpios = <&gpy4 3 0>; + + lcd@0 { + compatible = "samsung,ld9040"; + reg = <0>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + reset-gpios = <&gpy4 5 0>; + spi-max-frequency = <1200000>; + spi-cpol; + spi-cpha; + power-on-delay = <10>; + reset-delay = <10>; + panel-width-mm = <90>; + panel-height-mm = <154>; + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + fimd: fimd@11c00000 { pinctrl-0 = <&lcd_clk>, <&lcd_data24>; pinctrl-names = "default"; status = "okay"; samsung,invert-vden; samsung,invert-vclk; - display-timings { - timing { - clock-frequency = <23492370>; - hactive = <480>; - vactive = <800>; - hback-porch = <16>; - hfront-porch = <16>; - vback-porch = <2>; - vfront-porch = <28>; - hsync-len = <2>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <0>; - pixelclk-active = <0>; + #address-cells = <1>; + #size-cells = <0>; + port@3 { + reg = <3>; + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 4f851ccf40eb..53c717b6eb69 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -71,6 +71,15 @@ enable-active-high; }; + lcd_vdd3_reg: voltage-regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "LCD_VDD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + gpio = <&gpc0 1 0>; + enable-active-high; + }; + /* More to come */ }; @@ -511,6 +520,67 @@ }; }; + dsi_0: dsi@11C80000 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <0>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + + fimd@11c00000 { + status = "okay"; + }; + camera { pinctrl-0 = <&cam_port_b_clk_active>; pinctrl-names = "default"; diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c index a9e5c1a13666..b171901a3553 100644 --- a/drivers/gpu/drm/bridge/ptn3460.c +++ b/drivers/gpu/drm/bridge/ptn3460.c @@ -347,3 +347,4 @@ int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder, gpio_free(ptn_bridge->gpio_rst_n); return ret; } +EXPORT_SYMBOL(ptn3460_init); diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c index b155ee2ffa17..09821f46d768 100644 --- a/drivers/gpu/drm/drm_mipi_dsi.c +++ b/drivers/gpu/drm/drm_mipi_dsi.c @@ -142,8 +142,12 @@ int mipi_dsi_host_register(struct mipi_dsi_host *host) { struct device_node *node; - for_each_available_child_of_node(host->dev->of_node, node) + for_each_available_child_of_node(host->dev->of_node, node) { + /* skip nodes without reg property */ + if (!of_find_property(node, "reg", NULL)) + continue; of_mipi_dsi_device_add(host, node); + } return 0; } diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 56f95811a5e5..5bf5bca94f56 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -39,6 +39,15 @@ config DRM_EXYNOS_DPI help This enables support for Exynos parallel output. +config DRM_EXYNOS_DSI + bool "EXYNOS DRM MIPI-DSI driver support" + depends on DRM_EXYNOS + select DRM_MIPI_DSI + select DRM_PANEL + default n + help + This enables support for Exynos MIPI-DSI device. + config DRM_EXYNOS_DP bool "EXYNOS DRM DP driver support" depends on DRM_EXYNOS && ARCH_EXYNOS diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile index babcd52b65df..33ae3652b8da 100644 --- a/drivers/gpu/drm/exynos/Makefile +++ b/drivers/gpu/drm/exynos/Makefile @@ -12,6 +12,7 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o exynosdrm-$(CONFIG_DRM_EXYNOS_DMABUF) += exynos_drm_dmabuf.o exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o exynosdrm-$(CONFIG_DRM_EXYNOS_DPI) += exynos_drm_dpi.o +exynosdrm-$(CONFIG_DRM_EXYNOS_DSI) += exynos_drm_dsi.o exynosdrm-$(CONFIG_DRM_EXYNOS_DP) += exynos_dp_core.o exynos_dp_reg.o exynosdrm-$(CONFIG_DRM_EXYNOS_HDMI) += exynos_hdmi.o exynos_mixer.o exynosdrm-$(CONFIG_DRM_EXYNOS_VIDI) += exynos_drm_vidi.o diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index a59bca9f16e1..aed533bbfd31 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -1339,7 +1339,6 @@ static const struct of_device_id exynos_dp_match[] = { { .compatible = "samsung,exynos5-dp" }, {}, }; -MODULE_DEVICE_TABLE(of, exynos_dp_match); struct platform_driver dp_driver = { .probe = exynos_dp_probe, diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 771c87e90a2f..2d27ba23a6a8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -450,6 +450,12 @@ static int __init exynos_drm_init(void) goto out_dp; #endif +#ifdef CONFIG_DRM_EXYNOS_DSI + ret = platform_driver_register(&dsi_driver); + if (ret < 0) + goto out_dsi; +#endif + #ifdef CONFIG_DRM_EXYNOS_FIMD ret = platform_driver_register(&fimd_driver); if (ret < 0) @@ -566,6 +572,11 @@ static int __init exynos_drm_init(void) out_fimd: #endif +#ifdef CONFIG_DRM_EXYNOS_DSI + platform_driver_unregister(&dsi_driver); +out_dsi: +#endif + #ifdef CONFIG_DRM_EXYNOS_DP platform_driver_unregister(&dp_driver); out_dp: @@ -613,6 +624,10 @@ static void __exit exynos_drm_exit(void) platform_driver_unregister(&fimd_driver); #endif +#ifdef CONFIG_DRM_EXYNOS_DSI + platform_driver_unregister(&dsi_driver); +#endif + #ifdef CONFIG_DRM_EXYNOS_DP platform_driver_unregister(&dp_driver); #endif diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 2d892f32e831..4c5cf6843137 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -370,6 +370,7 @@ static inline int exynos_dpi_remove(struct device *dev) { return 0; } #endif extern struct platform_driver dp_driver; +extern struct platform_driver dsi_driver; extern struct platform_driver fimd_driver; extern struct platform_driver hdmi_driver; extern struct platform_driver mixer_driver; diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c new file mode 100644 index 000000000000..eb73e3bf2a0c --- /dev/null +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -0,0 +1,1524 @@ +/* + * Samsung SoC MIPI DSI Master driver. + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * + * Contacts: Tomasz Figa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include