[ALSA] azt3328.c: add 3D sound mixer switch/rename controls
- add 3D sound pre-3D/post-3D switch, as seen in standard AC-97 - rename controls to shorter and more accurate strings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Andreas Mohr
Jaroslav Kysela
parent
ca54bde363
commit
13769e3f21
2 changed files with 39 additions and 18 deletions
|
|
@ -39,8 +39,15 @@
|
|||
* for compatibility reasons) has the following features:
|
||||
*
|
||||
* - builtin AC97 conformant codec (SNR over 80dB)
|
||||
* (really AC97 compliant?? I really doubt it when looking
|
||||
* at the mixer register layout)
|
||||
* Note that "conformant" != "compliant"!! this chip's mixer register layout
|
||||
* *differs* from the standard AC97 layout:
|
||||
* they chose to not implement the headphone register (which is not a
|
||||
* problem since it's merely optional), yet when doing this, they committed
|
||||
* the grave sin of letting other registers follow immediately instead of
|
||||
* keeping a headphone dummy register, thereby shifting the mixer register
|
||||
* addresses illegally. So far unfortunately it looks like the very flexible
|
||||
* ALSA AC97 support is still not enough to easily compensate for such a
|
||||
* grave layout violation despite all tweaks and quirks mechanisms it offers.
|
||||
* - builtin genuine OPL3
|
||||
* - full duplex 16bit playback/record at independent sampling rate
|
||||
* - MPU401 (+ legacy address support) FIXME: how to enable legacy addr??
|
||||
|
|
@ -96,6 +103,9 @@
|
|||
* The standard suspend/resume functionality could probably make use of
|
||||
* some improvement, too...
|
||||
* - figure out what all unknown port bits are responsible for
|
||||
* - figure out some cleverly evil scheme to possibly make ALSA AC97 code
|
||||
* fully accept our quite incompatible ""AC97"" mixer and thus save some
|
||||
* code (but I'm not too optimistic that doing this is possible at all)
|
||||
*/
|
||||
|
||||
#include <sound/driver.h>
|
||||
|
|
@ -526,15 +536,18 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol,
|
|||
struct snd_ctl_elem_info *uinfo)
|
||||
{
|
||||
static const char * const texts1[] = {
|
||||
"ModemOut1", "ModemOut2"
|
||||
"Mic1", "Mic2"
|
||||
};
|
||||
static const char * const texts2[] = {
|
||||
"MonoSelectSource1", "MonoSelectSource2"
|
||||
"Mix", "Mic"
|
||||
};
|
||||
static const char * const texts3[] = {
|
||||
"Mic", "CD", "Video", "Aux",
|
||||
"Line", "Mix", "Mix Mono", "Phone"
|
||||
};
|
||||
static const char * const texts4[] = {
|
||||
"pre 3D", "post 3D"
|
||||
};
|
||||
struct azf3328_mixer_reg reg;
|
||||
|
||||
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
||||
|
|
@ -545,10 +558,17 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol,
|
|||
uinfo->value.enumerated.item = reg.enum_c - 1U;
|
||||
if (reg.reg == IDX_MIXER_ADVCTL2)
|
||||
{
|
||||
if (reg.lchan_shift == 8) /* modem out sel */
|
||||
switch(reg.lchan_shift) {
|
||||
case 8: /* modem out sel */
|
||||
strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]);
|
||||
else /* mono sel source */
|
||||
break;
|
||||
case 9: /* mono sel source */
|
||||
strcpy(uinfo->value.enumerated.name, texts2[uinfo->value.enumerated.item]);
|
||||
break;
|
||||
case 15: /* PCM Out Path */
|
||||
strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]);
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item]
|
||||
|
|
@ -641,13 +661,14 @@ static const struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata
|
|||
AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1),
|
||||
AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1),
|
||||
AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1),
|
||||
AZF3328_MIXER_ENUM("Modem Out Select", IDX_MIXER_ADVCTL2, 2, 8),
|
||||
AZF3328_MIXER_ENUM("Mono Select Source", IDX_MIXER_ADVCTL2, 2, 9),
|
||||
AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8),
|
||||
AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9),
|
||||
AZF3328_MIXER_ENUM("PCM", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */
|
||||
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0),
|
||||
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0),
|
||||
AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0),
|
||||
AZF3328_MIXER_VOL_SPECIAL("3D Control - Wide", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */
|
||||
AZF3328_MIXER_VOL_SPECIAL("3D Control - Space", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */
|
||||
AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */
|
||||
AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */
|
||||
#if MIXER_TESTING
|
||||
AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0),
|
||||
AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0),
|
||||
|
|
|
|||
|
|
@ -90,7 +90,7 @@
|
|||
#define IDX_IO_REC_DMA_CURROFS 0x34 /* PU:0x00000000 */
|
||||
#define IDX_IO_REC_SOUNDFORMAT 0x36 /* PU:0x0000 */
|
||||
|
||||
/** hmm, what is this I/O area for? MPU401?? (after playback, recording, ???, timer) **/
|
||||
/** hmm, what is this I/O area for? MPU401?? or external DAC via I2S?? (after playback, recording, ???, timer) **/
|
||||
#define IDX_IO_SOMETHING_FLAGS 0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init, PU:0x0000 */
|
||||
/* general */
|
||||
#define IDX_IO_42H 0x42 /* PU:0x0001 */
|
||||
|
|
@ -170,14 +170,14 @@
|
|||
#define IDX_MIXER_ADVCTL1 0x1e
|
||||
/* unlisted bits are unmodifiable */
|
||||
#define MIXER_ADVCTL1_3DWIDTH_MASK 0x000e
|
||||
#define MIXER_ADVCTL1_HIFI3D_MASK 0x0300
|
||||
#define IDX_MIXER_ADVCTL2 0x20 /* resembles AC97_GENERAL_PURPOSE reg! */
|
||||
#define MIXER_ADVCTL1_HIFI3D_MASK 0x0300 /* yup, this is missing the high bit that official AC97 contains, plus it doesn't have linear bit value range behaviour but instead acts weirdly (possibly we're dealing with two *different* 3D settings here??) */
|
||||
#define IDX_MIXER_ADVCTL2 0x20 /* subset of AC97_GENERAL_PURPOSE reg! */
|
||||
/* unlisted bits are unmodifiable */
|
||||
#define MIXER_ADVCTL2_BIT7 0x0080 /* WaveOut 3D Bypass? mutes WaveOut at LineOut */
|
||||
#define MIXER_ADVCTL2_BIT8 0x0100 /* is this Modem Out Select? */
|
||||
#define MIXER_ADVCTL2_BIT9 0x0200 /* Mono Select Source? */
|
||||
#define MIXER_ADVCTL2_BIT13 0x2000 /* 3D enable? */
|
||||
#define MIXER_ADVCTL2_BIT15 0x8000 /* unknown */
|
||||
#define MIXER_ADVCTL2_LPBK 0x0080 /* Loopback mode -- Win driver: "WaveOut3DBypass"? mutes WaveOut at LineOut */
|
||||
#define MIXER_ADVCTL2_MS 0x0100 /* Mic Select 0=Mic1, 1=Mic2 -- Win driver: "ModemOutSelect"?? */
|
||||
#define MIXER_ADVCTL2_MIX 0x0200 /* Mono output select 0=Mix, 1=Mic; Win driver: "MonoSelectSource"?? */
|
||||
#define MIXER_ADVCTL2_3D 0x2000 /* 3D Enhancement 1=on */
|
||||
#define MIXER_ADVCTL2_POP 0x8000 /* Pcm Out Path, 0=pre 3D, 1=post 3D */
|
||||
|
||||
#define IDX_MIXER_SOMETHING30H 0x30 /* used, but unknown??? */
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue