libata: add human-readable error value decoding
This adds human-readable decoding of the ATA status and error registers (similar to what drivers/ide does) as well as the SATA Serror register to libata error handling output. This prevents the need to pore through standards documents to figure out the meaning of the bits in these registers when looking at error reports. Some bits that drivers/ide decoded are not decoded here, since the bits are either command-dependent or obsolete, and properly parsing them would add too much complexity. Signed-off-by: Robert Hancock <hancockr@shaw.ca> [edited slightly to make output a bit more symmetric] Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
parent
6949b9148d
commit
1333e19434
2 changed files with 54 additions and 0 deletions
|
@ -1911,6 +1911,27 @@ static void ata_eh_link_report(struct ata_link *link)
|
||||||
ata_link_printk(link, KERN_ERR, "%s\n", desc);
|
ata_link_printk(link, KERN_ERR, "%s\n", desc);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
if (ehc->i.serror)
|
||||||
|
ata_port_printk(ap, KERN_ERR,
|
||||||
|
"SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
|
||||||
|
ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
|
||||||
|
ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
|
||||||
|
ehc->i.serror & SERR_DATA ? "UnrecovData " : "",
|
||||||
|
ehc->i.serror & SERR_PERSISTENT ? "Persist " : "",
|
||||||
|
ehc->i.serror & SERR_PROTOCOL ? "Proto " : "",
|
||||||
|
ehc->i.serror & SERR_INTERNAL ? "HostInt " : "",
|
||||||
|
ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "",
|
||||||
|
ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "",
|
||||||
|
ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "",
|
||||||
|
ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "",
|
||||||
|
ehc->i.serror & SERR_DISPARITY ? "Dispar " : "",
|
||||||
|
ehc->i.serror & SERR_CRC ? "BadCRC " : "",
|
||||||
|
ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "",
|
||||||
|
ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "",
|
||||||
|
ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
|
||||||
|
ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
|
||||||
|
ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "" );
|
||||||
|
|
||||||
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
|
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
|
||||||
static const char *dma_str[] = {
|
static const char *dma_str[] = {
|
||||||
[DMA_BIDIRECTIONAL] = "bidi",
|
[DMA_BIDIRECTIONAL] = "bidi",
|
||||||
|
@ -1942,6 +1963,30 @@ static void ata_eh_link_report(struct ata_link *link)
|
||||||
res->hob_lbal, res->hob_lbam, res->hob_lbah,
|
res->hob_lbal, res->hob_lbam, res->hob_lbah,
|
||||||
res->device, qc->err_mask, ata_err_string(qc->err_mask),
|
res->device, qc->err_mask, ata_err_string(qc->err_mask),
|
||||||
qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
|
qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
|
||||||
|
|
||||||
|
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
|
||||||
|
ATA_ERR) ) {
|
||||||
|
if (res->command & ATA_BUSY)
|
||||||
|
ata_dev_printk(qc->dev, KERN_ERR,
|
||||||
|
"status: { Busy }\n" );
|
||||||
|
else
|
||||||
|
ata_dev_printk(qc->dev, KERN_ERR,
|
||||||
|
"status: { %s%s%s%s}\n",
|
||||||
|
res->command & ATA_DRDY ? "DRDY " : "",
|
||||||
|
res->command & ATA_DF ? "DF " : "",
|
||||||
|
res->command & ATA_DRQ ? "DRQ " : "",
|
||||||
|
res->command & ATA_ERR ? "ERR " : "" );
|
||||||
|
}
|
||||||
|
|
||||||
|
if (cmd->command != ATA_CMD_PACKET &&
|
||||||
|
(res->feature & (ATA_ICRC | ATA_UNC | ATA_IDNF |
|
||||||
|
ATA_ABORTED)))
|
||||||
|
ata_dev_printk(qc->dev, KERN_ERR,
|
||||||
|
"error: { %s%s%s%s}\n",
|
||||||
|
res->feature & ATA_ICRC ? "ICRC " : "",
|
||||||
|
res->feature & ATA_UNC ? "UNC " : "",
|
||||||
|
res->feature & ATA_IDNF ? "IDNF " : "",
|
||||||
|
res->feature & ATA_ABORTED ? "ABRT " : "" );
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
@ -287,6 +287,15 @@ enum {
|
||||||
SERR_PROTOCOL = (1 << 10), /* protocol violation */
|
SERR_PROTOCOL = (1 << 10), /* protocol violation */
|
||||||
SERR_INTERNAL = (1 << 11), /* host internal error */
|
SERR_INTERNAL = (1 << 11), /* host internal error */
|
||||||
SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
|
SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
|
||||||
|
SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */
|
||||||
|
SERR_COMM_WAKE = (1 << 18), /* Comm wake */
|
||||||
|
SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */
|
||||||
|
SERR_DISPARITY = (1 << 20), /* Disparity */
|
||||||
|
SERR_CRC = (1 << 21), /* CRC error */
|
||||||
|
SERR_HANDSHAKE = (1 << 22), /* Handshake error */
|
||||||
|
SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */
|
||||||
|
SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */
|
||||||
|
SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */
|
||||||
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
|
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
|
||||||
|
|
||||||
/* struct ata_taskfile flags */
|
/* struct ata_taskfile flags */
|
||||||
|
|
Loading…
Reference in a new issue