Input: add new serio driver for Xilinx XPS PS2 IP
Added a new driver for Xilinx XPS PS2 IP. This driver is a flat driver to better match the Linux driver pattern. Signed-off-by: Sadanand <sadanan@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
John Linn
Dmitry Torokhov
parent
7342239273
commit
1191828f8e
3 changed files with 391 additions and 0 deletions
|
|
@ -190,4 +190,14 @@ config SERIO_RAW
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called serio_raw.
|
||||
|
||||
config SERIO_XILINX_XPS_PS2
|
||||
tristate "Xilinx XPS PS/2 Controller Support"
|
||||
depends on PPC
|
||||
help
|
||||
This driver supports XPS PS/2 IP from the Xilinx EDK on
|
||||
PowerPC platform.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called xilinx_ps2.
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -21,3 +21,4 @@ obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
|
|||
obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
|
||||
obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
|
||||
obj-$(CONFIG_SERIO_RAW) += serio_raw.o
|
||||
obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o
|
||||
|
|
|
|||
380
drivers/input/serio/xilinx_ps2.c
Normal file
380
drivers/input/serio/xilinx_ps2.c
Normal file
|
|
@ -0,0 +1,380 @@
|
|||
/*
|
||||
* Xilinx XPS PS/2 device driver
|
||||
*
|
||||
* (c) 2005 MontaVista Software, Inc.
|
||||
* (c) 2008 Xilinx, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/serio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#define DRIVER_NAME "xilinx_ps2"
|
||||
|
||||
/* Register offsets for the xps2 device */
|
||||
#define XPS2_SRST_OFFSET 0x00000000 /* Software Reset register */
|
||||
#define XPS2_STATUS_OFFSET 0x00000004 /* Status register */
|
||||
#define XPS2_RX_DATA_OFFSET 0x00000008 /* Receive Data register */
|
||||
#define XPS2_TX_DATA_OFFSET 0x0000000C /* Transmit Data register */
|
||||
#define XPS2_GIER_OFFSET 0x0000002C /* Global Interrupt Enable reg */
|
||||
#define XPS2_IPISR_OFFSET 0x00000030 /* Interrupt Status register */
|
||||
#define XPS2_IPIER_OFFSET 0x00000038 /* Interrupt Enable register */
|
||||
|
||||
/* Reset Register Bit Definitions */
|
||||
#define XPS2_SRST_RESET 0x0000000A /* Software Reset */
|
||||
|
||||
/* Status Register Bit Positions */
|
||||
#define XPS2_STATUS_RX_FULL 0x00000001 /* Receive Full */
|
||||
#define XPS2_STATUS_TX_FULL 0x00000002 /* Transmit Full */
|
||||
|
||||
/* Bit definitions for ISR/IER registers. Both the registers have the same bit
|
||||
* definitions and are only defined once. */
|
||||
#define XPS2_IPIXR_WDT_TOUT 0x00000001 /* Watchdog Timeout Interrupt */
|
||||
#define XPS2_IPIXR_TX_NOACK 0x00000002 /* Transmit No ACK Interrupt */
|
||||
#define XPS2_IPIXR_TX_ACK 0x00000004 /* Transmit ACK (Data) Interrupt */
|
||||
#define XPS2_IPIXR_RX_OVF 0x00000008 /* Receive Overflow Interrupt */
|
||||
#define XPS2_IPIXR_RX_ERR 0x00000010 /* Receive Error Interrupt */
|
||||
#define XPS2_IPIXR_RX_FULL 0x00000020 /* Receive Data Interrupt */
|
||||
|
||||
/* Mask for all the Transmit Interrupts */
|
||||
#define XPS2_IPIXR_TX_ALL (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK)
|
||||
|
||||
/* Mask for all the Receive Interrupts */
|
||||
#define XPS2_IPIXR_RX_ALL (XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR | \
|
||||
XPS2_IPIXR_RX_FULL)
|
||||
|
||||
/* Mask for all the Interrupts */
|
||||
#define XPS2_IPIXR_ALL (XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL | \
|
||||
XPS2_IPIXR_WDT_TOUT)
|
||||
|
||||
/* Global Interrupt Enable mask */
|
||||
#define XPS2_GIER_GIE_MASK 0x80000000
|
||||
|
||||
struct xps2data {
|
||||
int irq;
|
||||
u32 phys_addr;
|
||||
u32 remap_size;
|
||||
spinlock_t lock;
|
||||
u8 rxb; /* Rx buffer */
|
||||
void __iomem *base_address; /* virt. address of control registers */
|
||||
unsigned int dfl;
|
||||
struct serio serio; /* serio */
|
||||
};
|
||||
|
||||
/************************************/
|
||||
/* XPS PS/2 data transmission calls */
|
||||
/************************************/
|
||||
|
||||
/*
|
||||
* xps2_recv() will attempt to receive a byte of data from the PS/2 port.
|
||||
*/
|
||||
static int xps2_recv(struct xps2data *drvdata, u8 *byte)
|
||||
{
|
||||
u32 sr;
|
||||
int status = -1;
|
||||
|
||||
/* If there is data available in the PS/2 receiver, read it */
|
||||
sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
|
||||
if (sr & XPS2_STATUS_RX_FULL) {
|
||||
*byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET);
|
||||
status = 0;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/*********************/
|
||||
/* Interrupt handler */
|
||||
/*********************/
|
||||
static irqreturn_t xps2_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct xps2data *drvdata = dev_id;
|
||||
u32 intr_sr;
|
||||
u8 c;
|
||||
int status;
|
||||
|
||||
/* Get the PS/2 interrupts and clear them */
|
||||
intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET);
|
||||
out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr);
|
||||
|
||||
/* Check which interrupt is active */
|
||||
if (intr_sr & XPS2_IPIXR_RX_OVF)
|
||||
printk(KERN_WARNING "%s: receive overrun error\n",
|
||||
drvdata->serio.name);
|
||||
|
||||
if (intr_sr & XPS2_IPIXR_RX_ERR)
|
||||
drvdata->dfl |= SERIO_PARITY;
|
||||
|
||||
if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
|
||||
drvdata->dfl |= SERIO_TIMEOUT;
|
||||
|
||||
if (intr_sr & XPS2_IPIXR_RX_FULL) {
|
||||
status = xps2_recv(drvdata, &drvdata->rxb);
|
||||
|
||||
/* Error, if a byte is not received */
|
||||
if (status) {
|
||||
printk(KERN_ERR
|
||||
"%s: wrong rcvd byte count (%d)\n",
|
||||
drvdata->serio.name, status);
|
||||
} else {
|
||||
c = drvdata->rxb;
|
||||
serio_interrupt(&drvdata->serio, c, drvdata->dfl);
|
||||
drvdata->dfl = 0;
|
||||
}
|
||||
}
|
||||
|
||||
if (intr_sr & XPS2_IPIXR_TX_ACK)
|
||||
drvdata->dfl = 0;
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*******************/
|
||||
/* serio callbacks */
|
||||
/*******************/
|
||||
|
||||
/*
|
||||
* sxps2_write() sends a byte out through the PS/2 interface.
|
||||
*/
|
||||
static int sxps2_write(struct serio *pserio, unsigned char c)
|
||||
{
|
||||
struct xps2data *drvdata = pserio->port_data;
|
||||
unsigned long flags;
|
||||
u32 sr;
|
||||
int status = -1;
|
||||
|
||||
spin_lock_irqsave(&drvdata->lock, flags);
|
||||
|
||||
/* If the PS/2 transmitter is empty send a byte of data */
|
||||
sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
|
||||
if (!(sr & XPS2_STATUS_TX_FULL)) {
|
||||
out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c);
|
||||
status = 0;
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&drvdata->lock, flags);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/*
|
||||
* sxps2_open() is called when a port is open by the higher layer.
|
||||
*/
|
||||
static int sxps2_open(struct serio *pserio)
|
||||
{
|
||||
struct xps2data *drvdata = pserio->port_data;
|
||||
int retval;
|
||||
|
||||
retval = request_irq(drvdata->irq, &xps2_interrupt, 0,
|
||||
DRIVER_NAME, drvdata);
|
||||
if (retval) {
|
||||
printk(KERN_ERR
|
||||
"%s: Couldn't allocate interrupt %d\n",
|
||||
drvdata->serio.name, drvdata->irq);
|
||||
return retval;
|
||||
}
|
||||
|
||||
/* start reception by enabling the interrupts */
|
||||
out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
|
||||
out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
|
||||
(void)xps2_recv(drvdata, &drvdata->rxb);
|
||||
|
||||
return 0; /* success */
|
||||
}
|
||||
|
||||
/*
|
||||
* sxps2_close() frees the interrupt.
|
||||
*/
|
||||
static void sxps2_close(struct serio *pserio)
|
||||
{
|
||||
struct xps2data *drvdata = pserio->port_data;
|
||||
|
||||
/* Disable the PS2 interrupts */
|
||||
out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00);
|
||||
out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00);
|
||||
free_irq(drvdata->irq, drvdata);
|
||||
}
|
||||
|
||||
/*********************/
|
||||
/* Device setup code */
|
||||
/*********************/
|
||||
|
||||
static int xps2_setup(struct device *dev, struct resource *regs_res,
|
||||
struct resource *irq_res)
|
||||
{
|
||||
struct xps2data *drvdata;
|
||||
struct serio *serio;
|
||||
unsigned long remap_size;
|
||||
int retval;
|
||||
|
||||
if (!dev)
|
||||
return -EINVAL;
|
||||
|
||||
if (!regs_res || !irq_res) {
|
||||
dev_err(dev, "IO resource(s) not found\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
|
||||
if (!drvdata) {
|
||||
dev_err(dev, "Couldn't allocate device private record\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
dev_set_drvdata(dev, drvdata);
|
||||
|
||||
spin_lock_init(&drvdata->lock);
|
||||
drvdata->irq = irq_res->start;
|
||||
|
||||
remap_size = regs_res->end - regs_res->start + 1;
|
||||
if (!request_mem_region(regs_res->start, remap_size, DRIVER_NAME)) {
|
||||
dev_err(dev, "Couldn't lock memory region at 0x%08X\n",
|
||||
(unsigned int)regs_res->start);
|
||||
retval = -EBUSY;
|
||||
goto failed1;
|
||||
}
|
||||
|
||||
/* Fill in configuration data and add them to the list */
|
||||
drvdata->phys_addr = regs_res->start;
|
||||
drvdata->remap_size = remap_size;
|
||||
drvdata->base_address = ioremap(regs_res->start, remap_size);
|
||||
if (drvdata->base_address == NULL) {
|
||||
dev_err(dev, "Couldn't ioremap memory at 0x%08X\n",
|
||||
(unsigned int)regs_res->start);
|
||||
retval = -EFAULT;
|
||||
goto failed2;
|
||||
}
|
||||
|
||||
/* Disable all the interrupts, just in case */
|
||||
out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0);
|
||||
|
||||
/* Reset the PS2 device and abort any current transaction, to make sure
|
||||
* we have the PS2 in a good state */
|
||||
out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
|
||||
|
||||
dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
|
||||
drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
|
||||
|
||||
serio = &drvdata->serio;
|
||||
serio->id.type = SERIO_8042;
|
||||
serio->write = sxps2_write;
|
||||
serio->open = sxps2_open;
|
||||
serio->close = sxps2_close;
|
||||
serio->port_data = drvdata;
|
||||
serio->dev.parent = dev;
|
||||
snprintf(serio->name, sizeof(serio->name),
|
||||
"Xilinx XPS PS/2 at %08X", drvdata->phys_addr);
|
||||
snprintf(serio->phys, sizeof(serio->phys),
|
||||
"xilinxps2/serio at %08X", drvdata->phys_addr);
|
||||
serio_register_port(serio);
|
||||
|
||||
return 0; /* success */
|
||||
|
||||
failed2:
|
||||
release_mem_region(regs_res->start, remap_size);
|
||||
failed1:
|
||||
kfree(drvdata);
|
||||
dev_set_drvdata(dev, NULL);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
/***************************/
|
||||
/* OF Platform Bus Support */
|
||||
/***************************/
|
||||
|
||||
static int __devinit xps2_of_probe(struct of_device *ofdev, const struct
|
||||
of_device_id * match)
|
||||
{
|
||||
struct resource r_irq; /* Interrupt resources */
|
||||
struct resource r_mem; /* IO mem resources */
|
||||
int rc = 0;
|
||||
|
||||
printk(KERN_INFO "Device Tree Probing \'%s\'\n",
|
||||
ofdev->node->name);
|
||||
|
||||
/* Get iospace for the device */
|
||||
rc = of_address_to_resource(ofdev->node, 0, &r_mem);
|
||||
if (rc) {
|
||||
dev_err(&ofdev->dev, "invalid address\n");
|
||||
return rc;
|
||||
}
|
||||
|
||||
/* Get IRQ for the device */
|
||||
rc = of_irq_to_resource(ofdev->node, 0, &r_irq);
|
||||
if (rc == NO_IRQ) {
|
||||
dev_err(&ofdev->dev, "no IRQ found\n");
|
||||
return rc;
|
||||
}
|
||||
|
||||
return xps2_setup(&ofdev->dev, &r_mem, &r_irq);
|
||||
}
|
||||
|
||||
static int __devexit xps2_of_remove(struct of_device *of_dev)
|
||||
{
|
||||
struct device *dev = &of_dev->dev;
|
||||
struct xps2data *drvdata;
|
||||
|
||||
if (!dev)
|
||||
return -EINVAL;
|
||||
|
||||
drvdata = dev_get_drvdata(dev);
|
||||
|
||||
serio_unregister_port(&drvdata->serio);
|
||||
iounmap(drvdata->base_address);
|
||||
release_mem_region(drvdata->phys_addr, drvdata->remap_size);
|
||||
kfree(drvdata);
|
||||
|
||||
dev_set_drvdata(dev, NULL);
|
||||
|
||||
return 0; /* success */
|
||||
}
|
||||
|
||||
/* Match table for of_platform binding */
|
||||
static struct of_device_id xps2_of_match[] __devinitdata = {
|
||||
{ .compatible = "xlnx,xps-ps2-1.00.a", },
|
||||
{ /* end of list */ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, xps2_of_match);
|
||||
|
||||
static struct of_platform_driver xps2_of_driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.match_table = xps2_of_match,
|
||||
.probe = xps2_of_probe,
|
||||
.remove = __devexit_p(xps2_of_remove),
|
||||
};
|
||||
|
||||
static int __init xps2_init(void)
|
||||
{
|
||||
return of_register_platform_driver(&xps2_of_driver);
|
||||
}
|
||||
|
||||
static void __exit xps2_cleanup(void)
|
||||
{
|
||||
of_unregister_platform_driver(&xps2_of_driver);
|
||||
}
|
||||
|
||||
module_init(xps2_init);
|
||||
module_exit(xps2_cleanup);
|
||||
|
||||
MODULE_AUTHOR("Xilinx, Inc.");
|
||||
MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
Loading…
Reference in a new issue