[ARM] Orion: add Buffalo Terastation Pro II/Live support
This patch adds support for the Buffalo Terastation Pro II/Live. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
This commit is contained in:
Sylver Bruneau
Nicolas Pitre
parent
0eb66974c0
commit
104ea0781a
3 changed files with 376 additions and 0 deletions
|
|
@ -36,6 +36,12 @@ config MACH_TS209
|
|||
Say 'Y' here if you want your kernel to support the
|
||||
QNAP TS-109/TS-209 platform.
|
||||
|
||||
config MACH_TERASTATION_PRO2
|
||||
bool "Buffalo Terastation Pro II/Live"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Buffalo Terastation Pro II/Live platform.
|
||||
|
||||
config MACH_LINKSTATION_PRO
|
||||
bool "Buffalo Linkstation Pro/Live"
|
||||
select I2C_BOARDINFO
|
||||
|
|
|
|||
|
|
@ -2,6 +2,7 @@ obj-y += common.o addr-map.o pci.o gpio.o irq.o mpp.o
|
|||
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
|
||||
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
|
||||
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
|
||||
obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
|
||||
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
|
||||
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
|
||||
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
|
||||
|
|
|
|||
369
arch/arm/mach-orion5x/terastation_pro2-setup.c
Normal file
369
arch/arm/mach-orion5x/terastation_pro2-setup.c
Normal file
|
|
@ -0,0 +1,369 @@
|
|||
/*
|
||||
* Buffalo Terastation Pro II/Live Board Setup
|
||||
*
|
||||
* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/serial_reg.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/pci.h>
|
||||
#include <mach/orion5x.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
/*****************************************************************************
|
||||
* Terastation Pro 2/Live Info
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* Terastation Pro 2 hardware :
|
||||
* - Marvell 88F5281-D0
|
||||
* - Marvell 88SX6042 SATA controller (PCI)
|
||||
* - Marvell 88E1118 Gigabit Ethernet PHY
|
||||
* - 256KB NOR flash
|
||||
* - 128MB of DDR RAM
|
||||
* - PCIe port (not equipped)
|
||||
*/
|
||||
|
||||
/*
|
||||
* 256K NOR flash Device bus boot chip select
|
||||
*/
|
||||
|
||||
#define TSP2_NOR_BOOT_BASE 0xf4000000
|
||||
#define TSP2_NOR_BOOT_SIZE SZ_256K
|
||||
|
||||
/*****************************************************************************
|
||||
* 256KB NOR Flash on BOOT Device
|
||||
****************************************************************************/
|
||||
|
||||
static struct physmap_flash_data tsp2_nor_flash_data = {
|
||||
.width = 1,
|
||||
};
|
||||
|
||||
static struct resource tsp2_nor_flash_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = TSP2_NOR_BOOT_BASE,
|
||||
.end = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1,
|
||||
};
|
||||
|
||||
static struct platform_device tsp2_nor_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &tsp2_nor_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &tsp2_nor_flash_resource,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* PCI
|
||||
****************************************************************************/
|
||||
#define TSP2_PCI_SLOT0_OFFS 7
|
||||
#define TSP2_PCI_SLOT0_IRQ_PIN 11
|
||||
|
||||
void __init tsp2_pci_preinit(void)
|
||||
{
|
||||
int pin;
|
||||
|
||||
/*
|
||||
* Configure PCI GPIO IRQ pins
|
||||
*/
|
||||
pin = TSP2_PCI_SLOT0_IRQ_PIN;
|
||||
if (gpio_request(pin, "PCI Int1") == 0) {
|
||||
if (gpio_direction_input(pin) == 0) {
|
||||
set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
||||
} else {
|
||||
printk(KERN_ERR "tsp2_pci_preinit failed "
|
||||
"to set_irq_type pin %d\n", pin);
|
||||
gpio_free(pin);
|
||||
}
|
||||
} else {
|
||||
printk(KERN_ERR "tsp2_pci_preinit failed to "
|
||||
"gpio_request %d\n", pin);
|
||||
}
|
||||
}
|
||||
|
||||
static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
int irq;
|
||||
|
||||
/*
|
||||
* Check for devices with hard-wired IRQs.
|
||||
*/
|
||||
irq = orion5x_pci_map_irq(dev, slot, pin);
|
||||
if (irq != -1)
|
||||
return irq;
|
||||
|
||||
/*
|
||||
* PCI IRQs are connected via GPIOs.
|
||||
*/
|
||||
if (slot == TSP2_PCI_SLOT0_OFFS)
|
||||
return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN);
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
static struct hw_pci tsp2_pci __initdata = {
|
||||
.nr_controllers = 2,
|
||||
.preinit = tsp2_pci_preinit,
|
||||
.swizzle = pci_std_swizzle,
|
||||
.setup = orion5x_pci_sys_setup,
|
||||
.scan = orion5x_pci_sys_scan_bus,
|
||||
.map_irq = tsp2_pci_map_irq,
|
||||
};
|
||||
|
||||
static int __init tsp2_pci_init(void)
|
||||
{
|
||||
if (machine_is_terastation_pro2())
|
||||
pci_common_init(&tsp2_pci);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
subsys_initcall(tsp2_pci_init);
|
||||
|
||||
/*****************************************************************************
|
||||
* Ethernet
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv643xx_eth_platform_data tsp2_eth_data = {
|
||||
.phy_addr = 0,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* RTC 5C372a on I2C bus
|
||||
****************************************************************************/
|
||||
|
||||
#define TSP2_RTC_GPIO 9
|
||||
|
||||
static struct i2c_board_info __initdata tsp2_i2c_rtc = {
|
||||
I2C_BOARD_INFO("rs5c372a", 0x32),
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Terastation Pro II specific power off method via UART1-attached
|
||||
* microcontroller
|
||||
****************************************************************************/
|
||||
|
||||
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
|
||||
|
||||
static int tsp2_miconread(unsigned char *buf, int count)
|
||||
{
|
||||
int i;
|
||||
int timeout;
|
||||
|
||||
for (i = 0; i < count; i++) {
|
||||
timeout = 10;
|
||||
|
||||
while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
|
||||
if (--timeout == 0)
|
||||
break;
|
||||
udelay(1000);
|
||||
}
|
||||
|
||||
if (timeout == 0)
|
||||
break;
|
||||
buf[i] = readl(UART1_REG(RX));
|
||||
}
|
||||
|
||||
/* return read bytes */
|
||||
return i;
|
||||
}
|
||||
|
||||
static int tsp2_miconwrite(const unsigned char *buf, int count)
|
||||
{
|
||||
int i = 0;
|
||||
|
||||
while (count--) {
|
||||
while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
|
||||
barrier();
|
||||
writel(buf[i++], UART1_REG(TX));
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tsp2_miconsend(const unsigned char *data, int count)
|
||||
{
|
||||
int i;
|
||||
unsigned char checksum = 0;
|
||||
unsigned char recv_buf[40];
|
||||
unsigned char send_buf[40];
|
||||
unsigned char correct_ack[3];
|
||||
int retry = 2;
|
||||
|
||||
/* Generate checksum */
|
||||
for (i = 0; i < count; i++)
|
||||
checksum -= data[i];
|
||||
|
||||
do {
|
||||
/* Send data */
|
||||
tsp2_miconwrite(data, count);
|
||||
|
||||
/* send checksum */
|
||||
tsp2_miconwrite(&checksum, 1);
|
||||
|
||||
if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
|
||||
printk(KERN_ERR ">%s: receive failed.\n", __func__);
|
||||
|
||||
/* send preamble to clear the receive buffer */
|
||||
memset(&send_buf, 0xff, sizeof(send_buf));
|
||||
tsp2_miconwrite(send_buf, sizeof(send_buf));
|
||||
|
||||
/* make dummy reads */
|
||||
mdelay(100);
|
||||
tsp2_miconread(recv_buf, sizeof(recv_buf));
|
||||
} else {
|
||||
/* Generate expected ack */
|
||||
correct_ack[0] = 0x01;
|
||||
correct_ack[1] = data[1];
|
||||
correct_ack[2] = 0x00;
|
||||
|
||||
/* checksum Check */
|
||||
if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
|
||||
recv_buf[3]) & 0xFF) {
|
||||
printk(KERN_ERR ">%s: Checksum Error : "
|
||||
"Received data[%02x, %02x, %02x, %02x]"
|
||||
"\n", __func__, recv_buf[0],
|
||||
recv_buf[1], recv_buf[2], recv_buf[3]);
|
||||
} else {
|
||||
/* Check Received Data */
|
||||
if (correct_ack[0] == recv_buf[0] &&
|
||||
correct_ack[1] == recv_buf[1] &&
|
||||
correct_ack[2] == recv_buf[2]) {
|
||||
/* Interval for next command */
|
||||
mdelay(10);
|
||||
|
||||
/* Receive ACK */
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
/* Received NAK or illegal Data */
|
||||
printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
|
||||
"Received\n", __func__);
|
||||
}
|
||||
} while (retry--);
|
||||
|
||||
/* Interval for next command */
|
||||
mdelay(10);
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
static void tsp2_power_off(void)
|
||||
{
|
||||
const unsigned char watchdogkill[] = {0x01, 0x35, 0x00};
|
||||
const unsigned char shutdownwait[] = {0x00, 0x0c};
|
||||
const unsigned char poweroff[] = {0x00, 0x06};
|
||||
/* 38400 baud divisor */
|
||||
const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
|
||||
|
||||
pr_info("%s: triggering power-off...\n", __func__);
|
||||
|
||||
/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
|
||||
writel(0x83, UART1_REG(LCR));
|
||||
writel(divisor & 0xff, UART1_REG(DLL));
|
||||
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
|
||||
writel(0x1b, UART1_REG(LCR));
|
||||
writel(0x00, UART1_REG(IER));
|
||||
writel(0x07, UART1_REG(FCR));
|
||||
writel(0x00, UART1_REG(MCR));
|
||||
|
||||
/* Send the commands to shutdown the Terastation Pro II */
|
||||
tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ;
|
||||
tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ;
|
||||
tsp2_miconsend(poweroff, sizeof(poweroff));
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
* General Setup
|
||||
****************************************************************************/
|
||||
static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = {
|
||||
{ 0, MPP_PCIE_RST_OUTn },
|
||||
{ 1, MPP_UNUSED },
|
||||
{ 2, MPP_UNUSED },
|
||||
{ 3, MPP_UNUSED },
|
||||
{ 4, MPP_NAND }, /* BOOT NAND Flash REn */
|
||||
{ 5, MPP_NAND }, /* BOOT NAND Flash WEn */
|
||||
{ 6, MPP_NAND }, /* BOOT NAND Flash HREn[0] */
|
||||
{ 7, MPP_NAND }, /* BOOT NAND Flash WEn[0] */
|
||||
{ 8, MPP_GPIO }, /* MICON int */
|
||||
{ 9, MPP_GPIO }, /* RTC int */
|
||||
{ 10, MPP_UNUSED },
|
||||
{ 11, MPP_GPIO }, /* PCI Int A */
|
||||
{ 12, MPP_UNUSED },
|
||||
{ 13, MPP_GPIO }, /* UPS on UART0 enable */
|
||||
{ 14, MPP_GPIO }, /* UPS low battery detection */
|
||||
{ 15, MPP_UNUSED },
|
||||
{ 16, MPP_UART }, /* UART1 RXD */
|
||||
{ 17, MPP_UART }, /* UART1 TXD */
|
||||
{ 18, MPP_UART }, /* UART1 CTSn */
|
||||
{ 19, MPP_UART }, /* UART1 RTSn */
|
||||
{ -1 },
|
||||
};
|
||||
|
||||
static void __init tsp2_init(void)
|
||||
{
|
||||
/*
|
||||
* Setup basic Orion functions. Need to be called early.
|
||||
*/
|
||||
orion5x_init();
|
||||
|
||||
orion5x_mpp_conf(tsp2_mpp_modes);
|
||||
|
||||
/*
|
||||
* Configure peripherals.
|
||||
*/
|
||||
orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
|
||||
TSP2_NOR_BOOT_SIZE);
|
||||
platform_device_register(&tsp2_nor_flash);
|
||||
|
||||
orion5x_ehci0_init();
|
||||
orion5x_eth_init(&tsp2_eth_data);
|
||||
orion5x_i2c_init();
|
||||
orion5x_uart0_init();
|
||||
orion5x_uart1_init();
|
||||
|
||||
/* Get RTC IRQ and register the chip */
|
||||
if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) {
|
||||
if (gpio_direction_input(TSP2_RTC_GPIO) == 0)
|
||||
tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO);
|
||||
else
|
||||
gpio_free(TSP2_RTC_GPIO);
|
||||
}
|
||||
if (tsp2_i2c_rtc.irq == 0)
|
||||
pr_warning("tsp2_init: failed to get RTC IRQ\n");
|
||||
i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
|
||||
|
||||
/* register Terastation Pro II specific power-off method */
|
||||
pm_power_off = tsp2_power_off;
|
||||
}
|
||||
|
||||
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
|
||||
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
|
||||
.phys_io = ORION5X_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = tsp2_init,
|
||||
.map_io = orion5x_map_io,
|
||||
.init_irq = orion5x_init_irq,
|
||||
.timer = &orion5x_timer,
|
||||
.fixup = tag_fixup_mem32,
|
||||
MACHINE_END
|
||||
Loading…
Reference in a new issue