diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 04d7a96c7cf9..79ae58682adc 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1053,18 +1053,6 @@ config SERIAL_MSM_CONSOLE select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON -config SERIAL_MSM_HS - tristate "MSM UART High Speed: Serial Driver" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select SERIAL_CORE - help - If you have a machine based on MSM family of SoCs, you - can enable its onboard high speed serial port by enabling - this option. - - Choose M here to compile it as a module. The module will be - called msm_serial_hs. - config SERIAL_VT8500 bool "VIA VT8500 on-chip serial port support" depends on ARCH_VT8500 diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index f42b4f9845df..c3ac3d930b33 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -62,7 +62,6 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o -obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c deleted file mode 100644 index 62da8534ba75..000000000000 --- a/drivers/tty/serial/msm_serial_hs.c +++ /dev/null @@ -1,1874 +0,0 @@ -/* - * MSM 7k/8k High speed uart driver - * - * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved. - * Copyright (c) 2008 Google Inc. - * Modified: Nick Pelly - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * See the GNU General Public License for more details. - * - * Has optional support for uart power management independent of linux - * suspend/resume: - * - * RX wakeup. - * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the - * UART RX pin). This should only be used if there is not a wakeup - * GPIO on the UART CTS, and the first RX byte is known (for example, with the - * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will - * always be lost. RTS will be asserted even while the UART is off in this mode - * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -/* HSUART Registers */ -#define UARTDM_MR1_ADDR 0x0 -#define UARTDM_MR2_ADDR 0x4 - -/* Data Mover result codes */ -#define RSLT_FIFO_CNTR_BMSK (0xE << 28) -#define RSLT_VLD BIT(1) - -/* write only register */ -#define UARTDM_CSR_ADDR 0x8 -#define UARTDM_CSR_115200 0xFF -#define UARTDM_CSR_57600 0xEE -#define UARTDM_CSR_38400 0xDD -#define UARTDM_CSR_28800 0xCC -#define UARTDM_CSR_19200 0xBB -#define UARTDM_CSR_14400 0xAA -#define UARTDM_CSR_9600 0x99 -#define UARTDM_CSR_7200 0x88 -#define UARTDM_CSR_4800 0x77 -#define UARTDM_CSR_3600 0x66 -#define UARTDM_CSR_2400 0x55 -#define UARTDM_CSR_1200 0x44 -#define UARTDM_CSR_600 0x33 -#define UARTDM_CSR_300 0x22 -#define UARTDM_CSR_150 0x11 -#define UARTDM_CSR_75 0x00 - -/* write only register */ -#define UARTDM_TF_ADDR 0x70 -#define UARTDM_TF2_ADDR 0x74 -#define UARTDM_TF3_ADDR 0x78 -#define UARTDM_TF4_ADDR 0x7C - -/* write only register */ -#define UARTDM_CR_ADDR 0x10 -#define UARTDM_IMR_ADDR 0x14 - -#define UARTDM_IPR_ADDR 0x18 -#define UARTDM_TFWR_ADDR 0x1c -#define UARTDM_RFWR_ADDR 0x20 -#define UARTDM_HCR_ADDR 0x24 -#define UARTDM_DMRX_ADDR 0x34 -#define UARTDM_IRDA_ADDR 0x38 -#define UARTDM_DMEN_ADDR 0x3c - -/* UART_DM_NO_CHARS_FOR_TX */ -#define UARTDM_NCF_TX_ADDR 0x40 - -#define UARTDM_BADR_ADDR 0x44 - -#define UARTDM_SIM_CFG_ADDR 0x80 -/* Read Only register */ -#define UARTDM_SR_ADDR 0x8 - -/* Read Only register */ -#define UARTDM_RF_ADDR 0x70 -#define UARTDM_RF2_ADDR 0x74 -#define UARTDM_RF3_ADDR 0x78 -#define UARTDM_RF4_ADDR 0x7C - -/* Read Only register */ -#define UARTDM_MISR_ADDR 0x10 - -/* Read Only register */ -#define UARTDM_ISR_ADDR 0x14 -#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38 - -#define UARTDM_RXFS_ADDR 0x50 - -/* Register field Mask Mapping */ -#define UARTDM_SR_PAR_FRAME_BMSK BIT(5) -#define UARTDM_SR_OVERRUN_BMSK BIT(4) -#define UARTDM_SR_TXEMT_BMSK BIT(3) -#define UARTDM_SR_TXRDY_BMSK BIT(2) -#define UARTDM_SR_RXRDY_BMSK BIT(0) - -#define UARTDM_CR_TX_DISABLE_BMSK BIT(3) -#define UARTDM_CR_RX_DISABLE_BMSK BIT(1) -#define UARTDM_CR_TX_EN_BMSK BIT(2) -#define UARTDM_CR_RX_EN_BMSK BIT(0) - -/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */ -#define RESET_RX 0x10 -#define RESET_TX 0x20 -#define RESET_ERROR_STATUS 0x30 -#define RESET_BREAK_INT 0x40 -#define START_BREAK 0x50 -#define STOP_BREAK 0x60 -#define RESET_CTS 0x70 -#define RESET_STALE_INT 0x80 -#define RFR_LOW 0xD0 -#define RFR_HIGH 0xE0 -#define CR_PROTECTION_EN 0x100 -#define STALE_EVENT_ENABLE 0x500 -#define STALE_EVENT_DISABLE 0x600 -#define FORCE_STALE_EVENT 0x400 -#define CLEAR_TX_READY 0x300 -#define RESET_TX_ERROR 0x800 -#define RESET_TX_DONE 0x810 - -#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00 -#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f -#define UARTDM_MR1_CTS_CTL_BMSK 0x40 -#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80 - -#define UARTDM_MR2_ERROR_MODE_BMSK 0x40 -#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30 - -/* bits per character configuration */ -#define FIVE_BPC (0 << 4) -#define SIX_BPC (1 << 4) -#define SEVEN_BPC (2 << 4) -#define EIGHT_BPC (3 << 4) - -#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc -#define STOP_BIT_ONE (1 << 2) -#define STOP_BIT_TWO (3 << 2) - -#define UARTDM_MR2_PARITY_MODE_BMSK 0x3 - -/* Parity configuration */ -#define NO_PARITY 0x0 -#define EVEN_PARITY 0x1 -#define ODD_PARITY 0x2 -#define SPACE_PARITY 0x3 - -#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80 -#define UARTDM_IPR_STALE_LSB_BMSK 0x1f - -/* These can be used for both ISR and IMR register */ -#define UARTDM_ISR_TX_READY_BMSK BIT(7) -#define UARTDM_ISR_CURRENT_CTS_BMSK BIT(6) -#define UARTDM_ISR_DELTA_CTS_BMSK BIT(5) -#define UARTDM_ISR_RXLEV_BMSK BIT(4) -#define UARTDM_ISR_RXSTALE_BMSK BIT(3) -#define UARTDM_ISR_RXBREAK_BMSK BIT(2) -#define UARTDM_ISR_RXHUNT_BMSK BIT(1) -#define UARTDM_ISR_TXLEV_BMSK BIT(0) - -/* Field definitions for UART_DM_DMEN*/ -#define UARTDM_TX_DM_EN_BMSK 0x1 -#define UARTDM_RX_DM_EN_BMSK 0x2 - -#define UART_FIFOSIZE 64 -#define UARTCLK 7372800 - -/* Rx DMA request states */ -enum flush_reason { - FLUSH_NONE, - FLUSH_DATA_READY, - FLUSH_DATA_INVALID, /* values after this indicate invalid data */ - FLUSH_IGNORE = FLUSH_DATA_INVALID, - FLUSH_STOP, - FLUSH_SHUTDOWN, -}; - -/* UART clock states */ -enum msm_hs_clk_states_e { - MSM_HS_CLK_PORT_OFF, /* port not in use */ - MSM_HS_CLK_OFF, /* clock disabled */ - MSM_HS_CLK_REQUEST_OFF, /* disable after TX and RX flushed */ - MSM_HS_CLK_ON, /* clock enabled */ -}; - -/* Track the forced RXSTALE flush during clock off sequence. - * These states are only valid during MSM_HS_CLK_REQUEST_OFF */ -enum msm_hs_clk_req_off_state_e { - CLK_REQ_OFF_START, - CLK_REQ_OFF_RXSTALE_ISSUED, - CLK_REQ_OFF_FLUSH_ISSUED, - CLK_REQ_OFF_RXSTALE_FLUSHED, -}; - -/** - * struct msm_hs_tx - * @tx_ready_int_en: ok to dma more tx? - * @dma_in_flight: tx dma in progress - * @xfer: top level DMA command pointer structure - * @command_ptr: third level command struct pointer - * @command_ptr_ptr: second level command list struct pointer - * @mapped_cmd_ptr: DMA view of third level command struct - * @mapped_cmd_ptr_ptr: DMA view of second level command list struct - * @tx_count: number of bytes to transfer in DMA transfer - * @dma_base: DMA view of UART xmit buffer - * - * This structure describes a single Tx DMA transaction. MSM DMA - * commands have two levels of indirection. The top level command - * ptr points to a list of command ptr which in turn points to a - * single DMA 'command'. In our case each Tx transaction consists - * of a single second level pointer pointing to a 'box type' command. - */ -struct msm_hs_tx { - unsigned int tx_ready_int_en; - unsigned int dma_in_flight; - struct msm_dmov_cmd xfer; - dmov_box *command_ptr; - u32 *command_ptr_ptr; - dma_addr_t mapped_cmd_ptr; - dma_addr_t mapped_cmd_ptr_ptr; - int tx_count; - dma_addr_t dma_base; -}; - -/** - * struct msm_hs_rx - * @flush: Rx DMA request state - * @xfer: top level DMA command pointer structure - * @cmdptr_dmaaddr: DMA view of second level command structure - * @command_ptr: third level DMA command pointer structure - * @command_ptr_ptr: second level DMA command list pointer - * @mapped_cmd_ptr: DMA view of the third level command structure - * @wait: wait for DMA completion before shutdown - * @buffer: destination buffer for RX DMA - * @rbuffer: DMA view of buffer - * @pool: dma pool out of which coherent rx buffer is allocated - * @tty_work: private work-queue for tty flip buffer push task - * - * This structure describes a single Rx DMA transaction. Rx DMA - * transactions use box mode DMA commands. - */ -struct msm_hs_rx { - enum flush_reason flush; - struct msm_dmov_cmd xfer; - dma_addr_t cmdptr_dmaaddr; - dmov_box *command_ptr; - u32 *command_ptr_ptr; - dma_addr_t mapped_cmd_ptr; - wait_queue_head_t wait; - dma_addr_t rbuffer; - unsigned char *buffer; - struct dma_pool *pool; - struct work_struct tty_work; -}; - -/** - * struct msm_hs_rx_wakeup - * @irq: IRQ line to be configured as interrupt source on Rx activity - * @ignore: boolean value. 1 = ignore the wakeup interrupt - * @rx_to_inject: extra character to be inserted to Rx tty on wakeup - * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character - * - * This is an optional structure required for UART Rx GPIO IRQ based - * wakeup from low power state. UART wakeup can be triggered by RX activity - * (using a wakeup GPIO on the UART RX pin). This should only be used if - * there is not a wakeup GPIO on the UART CTS, and the first RX byte is - * known (eg., with the Bluetooth Texas Instruments HCILL protocol), - * since the first RX byte will always be lost. RTS will be asserted even - * while the UART is clocked off in this mode of operation. - */ -struct msm_hs_rx_wakeup { - int irq; /* < 0 indicates low power wakeup disabled */ - unsigned char ignore; - unsigned char inject_rx; - char rx_to_inject; -}; - -/** - * struct msm_hs_port - * @uport: embedded uart port structure - * @imr_reg: shadow value of UARTDM_IMR - * @clk: uart input clock handle - * @tx: Tx transaction related data structure - * @rx: Rx transaction related data structure - * @dma_tx_channel: Tx DMA command channel - * @dma_rx_channel Rx DMA command channel - * @dma_tx_crci: Tx channel rate control interface number - * @dma_rx_crci: Rx channel rate control interface number - * @clk_off_timer: Timer to poll DMA event completion before clock off - * @clk_off_delay: clk_off_timer poll interval - * @clk_state: overall clock state - * @clk_req_off_state: post flush clock states - * @rx_wakeup: optional rx_wakeup feature related data - * @exit_lpm_cb: optional callback to exit low power mode - * - * Low level serial port structure. - */ -struct msm_hs_port { - struct uart_port uport; - unsigned long imr_reg; - struct clk *clk; - struct msm_hs_tx tx; - struct msm_hs_rx rx; - - int dma_tx_channel; - int dma_rx_channel; - int dma_tx_crci; - int dma_rx_crci; - - struct hrtimer clk_off_timer; - ktime_t clk_off_delay; - enum msm_hs_clk_states_e clk_state; - enum msm_hs_clk_req_off_state_e clk_req_off_state; - - struct msm_hs_rx_wakeup rx_wakeup; - void (*exit_lpm_cb)(struct uart_port *); -}; - -#define MSM_UARTDM_BURST_SIZE 16 /* DM burst size (in bytes) */ -#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE -#define UARTDM_RX_BUF_SIZE 512 - -#define UARTDM_NR 2 - -static struct msm_hs_port q_uart_port[UARTDM_NR]; -static struct platform_driver msm_serial_hs_platform_driver; -static struct uart_driver msm_hs_driver; -static struct uart_ops msm_hs_ops; -static struct workqueue_struct *msm_hs_workqueue; - -#define UARTDM_TO_MSM(uart_port) \ - container_of((uart_port), struct msm_hs_port, uport) - -static unsigned int use_low_power_rx_wakeup(struct msm_hs_port - *msm_uport) -{ - return (msm_uport->rx_wakeup.irq >= 0); -} - -static unsigned int msm_hs_read(struct uart_port *uport, - unsigned int offset) -{ - return ioread32(uport->membase + offset); -} - -static void msm_hs_write(struct uart_port *uport, unsigned int offset, - unsigned int value) -{ - iowrite32(value, uport->membase + offset); -} - -static void msm_hs_release_port(struct uart_port *port) -{ - iounmap(port->membase); -} - -static int msm_hs_request_port(struct uart_port *port) -{ - port->membase = ioremap(port->mapbase, PAGE_SIZE); - if (unlikely(!port->membase)) - return -ENOMEM; - - /* configure the CR Protection to Enable */ - msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN); - return 0; -} - -static int msm_hs_remove(struct platform_device *pdev) -{ - - struct msm_hs_port *msm_uport; - struct device *dev; - - if (pdev->id < 0 || pdev->id >= UARTDM_NR) { - printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); - return -EINVAL; - } - - msm_uport = &q_uart_port[pdev->id]; - dev = msm_uport->uport.dev; - - dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box), - DMA_TO_DEVICE); - dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, - msm_uport->rx.rbuffer); - dma_pool_destroy(msm_uport->rx.pool); - - dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32), - DMA_TO_DEVICE); - dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32), - DMA_TO_DEVICE); - dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box), - DMA_TO_DEVICE); - - uart_remove_one_port(&msm_hs_driver, &msm_uport->uport); - clk_put(msm_uport->clk); - - /* Free the tx resources */ - kfree(msm_uport->tx.command_ptr); - kfree(msm_uport->tx.command_ptr_ptr); - - /* Free the rx resources */ - kfree(msm_uport->rx.command_ptr); - kfree(msm_uport->rx.command_ptr_ptr); - - iounmap(msm_uport->uport.membase); - - return 0; -} - -static int msm_hs_init_clk_locked(struct uart_port *uport) -{ - int ret; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - ret = clk_enable(msm_uport->clk); - if (ret) { - printk(KERN_ERR "Error could not turn on UART clk\n"); - return ret; - } - - /* Set up the MREG/NREG/DREG/MNDREG */ - ret = clk_set_rate(msm_uport->clk, uport->uartclk); - if (ret) { - printk(KERN_WARNING "Error setting clock rate on UART\n"); - clk_disable(msm_uport->clk); - return ret; - } - - msm_uport->clk_state = MSM_HS_CLK_ON; - return 0; -} - -/* Enable and Disable clocks (Used for power management) */ -static void msm_hs_pm(struct uart_port *uport, unsigned int state, - unsigned int oldstate) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - if (use_low_power_rx_wakeup(msm_uport) || - msm_uport->exit_lpm_cb) - return; /* ignore linux PM states, - use msm_hs_request_clock API */ - - switch (state) { - case 0: - clk_enable(msm_uport->clk); - break; - case 3: - clk_disable(msm_uport->clk); - break; - default: - dev_err(uport->dev, "msm_serial: Unknown PM state %d\n", - state); - } -} - -/* - * programs the UARTDM_CSR register with correct bit rates - * - * Interrupts should be disabled before we are called, as - * we modify Set Baud rate - * Set receive stale interrupt level, dependent on Bit Rate - * Goal is to have around 8 ms before indicate stale. - * roundup (((Bit Rate * .008) / 10) + 1 - */ -static void msm_hs_set_bps_locked(struct uart_port *uport, - unsigned int bps) -{ - unsigned long rxstale; - unsigned long data; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - switch (bps) { - case 300: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75); - rxstale = 1; - break; - case 600: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150); - rxstale = 1; - break; - case 1200: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300); - rxstale = 1; - break; - case 2400: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600); - rxstale = 1; - break; - case 4800: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200); - rxstale = 1; - break; - case 9600: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); - rxstale = 2; - break; - case 14400: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600); - rxstale = 3; - break; - case 19200: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800); - rxstale = 4; - break; - case 28800: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200); - rxstale = 6; - break; - case 38400: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600); - rxstale = 8; - break; - case 57600: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400); - rxstale = 16; - break; - case 76800: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200); - rxstale = 16; - break; - case 115200: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800); - rxstale = 31; - break; - case 230400: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600); - rxstale = 31; - break; - case 460800: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); - rxstale = 31; - break; - case 4000000: - case 3686400: - case 3200000: - case 3500000: - case 3000000: - case 2500000: - case 1500000: - case 1152000: - case 1000000: - case 921600: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); - rxstale = 31; - break; - default: - msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); - /* default to 9600 */ - bps = 9600; - rxstale = 2; - break; - } - if (bps > 460800) - uport->uartclk = bps * 16; - else - uport->uartclk = UARTCLK; - - if (clk_set_rate(msm_uport->clk, uport->uartclk)) { - printk(KERN_WARNING "Error setting clock rate on UART\n"); - return; - } - - data = rxstale & UARTDM_IPR_STALE_LSB_BMSK; - data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2); - - msm_hs_write(uport, UARTDM_IPR_ADDR, data); -} - -/* - * termios : new ktermios - * oldtermios: old ktermios previous setting - * - * Configure the serial port - */ -static void msm_hs_set_termios(struct uart_port *uport, - struct ktermios *termios, - struct ktermios *oldtermios) -{ - unsigned int bps; - unsigned long data; - unsigned long flags; - unsigned int c_cflag = termios->c_cflag; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - spin_lock_irqsave(&uport->lock, flags); - clk_enable(msm_uport->clk); - - /* 300 is the minimum baud support by the driver */ - bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000); - - /* Temporary remapping 200 BAUD to 3.2 mbps */ - if (bps == 200) - bps = 3200000; - - msm_hs_set_bps_locked(uport, bps); - - data = msm_hs_read(uport, UARTDM_MR2_ADDR); - data &= ~UARTDM_MR2_PARITY_MODE_BMSK; - /* set parity */ - if (PARENB == (c_cflag & PARENB)) { - if (PARODD == (c_cflag & PARODD)) - data |= ODD_PARITY; - else if (CMSPAR == (c_cflag & CMSPAR)) - data |= SPACE_PARITY; - else - data |= EVEN_PARITY; - } - - /* Set bits per char */ - data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK; - - switch (c_cflag & CSIZE) { - case CS5: - data |= FIVE_BPC; - break; - case CS6: - data |= SIX_BPC; - break; - case CS7: - data |= SEVEN_BPC; - break; - default: - data |= EIGHT_BPC; - break; - } - /* stop bits */ - if (c_cflag & CSTOPB) { - data |= STOP_BIT_TWO; - } else { - /* otherwise 1 stop bit */ - data |= STOP_BIT_ONE; - } - data |= UARTDM_MR2_ERROR_MODE_BMSK; - /* write parity/bits per char/stop bit configuration */ - msm_hs_write(uport, UARTDM_MR2_ADDR, data); - - /* Configure HW flow control */ - data = msm_hs_read(uport, UARTDM_MR1_ADDR); - - data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK); - - if (c_cflag & CRTSCTS) { - data |= UARTDM_MR1_CTS_CTL_BMSK; - data |= UARTDM_MR1_RX_RDY_CTL_BMSK; - } - - msm_hs_write(uport, UARTDM_MR1_ADDR, data); - - uport->ignore_status_mask = termios->c_iflag & INPCK; - uport->ignore_status_mask |= termios->c_iflag & IGNPAR; - uport->read_status_mask = (termios->c_cflag & CREAD); - - msm_hs_write(uport, UARTDM_IMR_ADDR, 0); - - /* Set Transmit software time out */ - uart_update_timeout(uport, c_cflag, bps); - - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); - - if (msm_uport->rx.flush == FLUSH_NONE) { - msm_uport->rx.flush = FLUSH_IGNORE; - msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); - } - - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - - clk_disable(msm_uport->clk); - spin_unlock_irqrestore(&uport->lock, flags); -} - -/* - * Standard API, Transmitter - * Any character in the transmit shift register is sent - */ -static unsigned int msm_hs_tx_empty(struct uart_port *uport) -{ - unsigned int data; - unsigned int ret = 0; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - clk_enable(msm_uport->clk); - - data = msm_hs_read(uport, UARTDM_SR_ADDR); - if (data & UARTDM_SR_TXEMT_BMSK) - ret = TIOCSER_TEMT; - - clk_disable(msm_uport->clk); - - return ret; -} - -/* - * Standard API, Stop transmitter. - * Any character in the transmit shift register is sent as - * well as the current data mover transfer . - */ -static void msm_hs_stop_tx_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - msm_uport->tx.tx_ready_int_en = 0; -} - -/* - * Standard API, Stop receiver as soon as possible. - * - * Function immediately terminates the operation of the - * channel receiver and any incoming characters are lost. None - * of the receiver status bits are affected by this command and - * characters that are already in the receive FIFO there. - */ -static void msm_hs_stop_rx_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - unsigned int data; - - clk_enable(msm_uport->clk); - - /* disable dlink */ - data = msm_hs_read(uport, UARTDM_DMEN_ADDR); - data &= ~UARTDM_RX_DM_EN_BMSK; - msm_hs_write(uport, UARTDM_DMEN_ADDR, data); - - /* Disable the receiver */ - if (msm_uport->rx.flush == FLUSH_NONE) - msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); - - if (msm_uport->rx.flush != FLUSH_SHUTDOWN) - msm_uport->rx.flush = FLUSH_STOP; - - clk_disable(msm_uport->clk); -} - -/* Transmit the next chunk of data */ -static void msm_hs_submit_tx_locked(struct uart_port *uport) -{ - int left; - int tx_count; - dma_addr_t src_addr; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - struct msm_hs_tx *tx = &msm_uport->tx; - struct circ_buf *tx_buf = &msm_uport->uport.state->xmit; - - if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) { - msm_hs_stop_tx_locked(uport); - return; - } - - tx->dma_in_flight = 1; - - tx_count = uart_circ_chars_pending(tx_buf); - - if (UARTDM_TX_BUF_SIZE < tx_count) - tx_count = UARTDM_TX_BUF_SIZE; - - left = UART_XMIT_SIZE - tx_buf->tail; - - if (tx_count > left) - tx_count = left; - - src_addr = tx->dma_base + tx_buf->tail; - dma_sync_single_for_device(uport->dev, src_addr, tx_count, - DMA_TO_DEVICE); - - tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) | - ((tx_count + 15) >> 4); - tx->command_ptr->src_row_addr = src_addr; - - dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr, - sizeof(dmov_box), DMA_TO_DEVICE); - - *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr); - - dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr, - sizeof(u32), DMA_TO_DEVICE); - - /* Save tx_count to use in Callback */ - tx->tx_count = tx_count; - msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count); - - /* Disable the tx_ready interrupt */ - msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer); -} - -/* Start to receive the next chunk of data */ -static void msm_hs_start_rx_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); - msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE); - msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE); - msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - - msm_uport->rx.flush = FLUSH_NONE; - msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer); - - /* might have finished RX and be ready to clock off */ - hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay, - HRTIMER_MODE_REL); -} - -/* Enable the transmitter Interrupt */ -static void msm_hs_start_tx_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - clk_enable(msm_uport->clk); - - if (msm_uport->exit_lpm_cb) - msm_uport->exit_lpm_cb(uport); - - if (msm_uport->tx.tx_ready_int_en == 0) { - msm_uport->tx.tx_ready_int_en = 1; - msm_hs_submit_tx_locked(uport); - } - - clk_disable(msm_uport->clk); -} - -/* - * This routine is called when we are done with a DMA transfer - * - * This routine is registered with Data mover when we set - * up a Data Mover transfer. It is called from Data mover ISR - * when the DMA transfer is done. - */ -static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr, - unsigned int result, - struct msm_dmov_errdata *err) -{ - unsigned long flags; - struct msm_hs_port *msm_uport; - - /* DMA did not finish properly */ - WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) && - !(result & RSLT_VLD)); - - msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer); - - spin_lock_irqsave(&msm_uport->uport.lock, flags); - clk_enable(msm_uport->clk); - - msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK; - msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - - clk_disable(msm_uport->clk); - spin_unlock_irqrestore(&msm_uport->uport.lock, flags); -} - -/* - * This routine is called when we are done with a DMA transfer or the - * a flush has been sent to the data mover driver. - * - * This routine is registered with Data mover when we set up a Data Mover - * transfer. It is called from Data mover ISR when the DMA transfer is done. - */ -static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, - unsigned int result, - struct msm_dmov_errdata *err) -{ - int retval; - int rx_count; - unsigned long status; - unsigned int error_f = 0; - unsigned long flags; - unsigned int flush; - struct tty_port *port; - struct uart_port *uport; - struct msm_hs_port *msm_uport; - - msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer); - uport = &msm_uport->uport; - - spin_lock_irqsave(&uport->lock, flags); - clk_enable(msm_uport->clk); - - port = &uport->state->port; - - msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); - - status = msm_hs_read(uport, UARTDM_SR_ADDR); - - /* overflow is not connect to data in a FIFO */ - if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) && - (uport->read_status_mask & CREAD))) { - tty_insert_flip_char(port, 0, TTY_OVERRUN); - uport->icount.buf_overrun++; - error_f = 1; - } - - if (!(uport->ignore_status_mask & INPCK)) - status = status & ~(UARTDM_SR_PAR_FRAME_BMSK); - - if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) { - /* Can not tell difference between parity & frame error */ - uport->icount.parity++; - error_f = 1; - if (uport->ignore_status_mask & IGNPAR) - tty_insert_flip_char(port, 0, TTY_PARITY); - } - - if (error_f) - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); - - if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED) - msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED; - - flush = msm_uport->rx.flush; - if (flush == FLUSH_IGNORE) - msm_hs_start_rx_locked(uport); - if (flush == FLUSH_STOP) - msm_uport->rx.flush = FLUSH_SHUTDOWN; - if (flush >= FLUSH_DATA_INVALID) - goto out; - - rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR); - - if (0 != (uport->read_status_mask & CREAD)) { - retval = tty_insert_flip_string(port, msm_uport->rx.buffer, - rx_count); - BUG_ON(retval != rx_count); - } - - msm_hs_start_rx_locked(uport); - -out: - clk_disable(msm_uport->clk); - - spin_unlock_irqrestore(&uport->lock, flags); - - if (flush < FLUSH_DATA_INVALID) - queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); -} - -static void msm_hs_tty_flip_buffer_work(struct work_struct *work) -{ - struct msm_hs_port *msm_uport = - container_of(work, struct msm_hs_port, rx.tty_work); - - tty_flip_buffer_push(&msm_uport->uport.state->port); -} - -/* - * Standard API, Current states of modem control inputs - * - * Since CTS can be handled entirely by HARDWARE we always - * indicate clear to send and count on the TX FIFO to block when - * it fills up. - * - * - TIOCM_DCD - * - TIOCM_CTS - * - TIOCM_DSR - * - TIOCM_RI - * (Unsupported) DCD and DSR will return them high. RI will return low. - */ -static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport) -{ - return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; -} - -/* - * True enables UART auto RFR, which indicates we are ready for data if the RX - * buffer is not full. False disables auto RFR, and deasserts RFR to indicate - * we are not ready for data. Must be called with UART clock on. - */ -static void set_rfr_locked(struct uart_port *uport, int auto_rfr) -{ - unsigned int data; - - data = msm_hs_read(uport, UARTDM_MR1_ADDR); - - if (auto_rfr) { - /* enable auto ready-for-receiving */ - data |= UARTDM_MR1_RX_RDY_CTL_BMSK; - msm_hs_write(uport, UARTDM_MR1_ADDR, data); - } else { - /* disable auto ready-for-receiving */ - data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK; - msm_hs_write(uport, UARTDM_MR1_ADDR, data); - /* RFR is active low, set high */ - msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH); - } -} - -/* - * Standard API, used to set or clear RFR - */ -static void msm_hs_set_mctrl_locked(struct uart_port *uport, - unsigned int mctrl) -{ - unsigned int auto_rfr; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - clk_enable(msm_uport->clk); - - auto_rfr = TIOCM_RTS & mctrl ? 1 : 0; - set_rfr_locked(uport, auto_rfr); - - clk_disable(msm_uport->clk); -} - -/* Standard API, Enable modem status (CTS) interrupt */ -static void msm_hs_enable_ms_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - clk_enable(msm_uport->clk); - - /* Enable DELTA_CTS Interrupt */ - msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - - clk_disable(msm_uport->clk); - -} - -/* - * Standard API, Break Signal - * - * Control the transmission of a break signal. ctl eq 0 => break - * signal terminate ctl ne 0 => start break signal - */ -static void msm_hs_break_ctl(struct uart_port *uport, int ctl) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - clk_enable(msm_uport->clk); - msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK); - clk_disable(msm_uport->clk); -} - -static void msm_hs_config_port(struct uart_port *uport, int cfg_flags) -{ - unsigned long flags; - - spin_lock_irqsave(&uport->lock, flags); - if (cfg_flags & UART_CONFIG_TYPE) { - uport->type = PORT_MSM; - msm_hs_request_port(uport); - } - spin_unlock_irqrestore(&uport->lock, flags); -} - -/* Handle CTS changes (Called from interrupt handler) */ -static void msm_hs_handle_delta_cts_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - clk_enable(msm_uport->clk); - - /* clear interrupt */ - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); - uport->icount.cts++; - - clk_disable(msm_uport->clk); - - /* clear the IOCTL TIOCMIWAIT if called */ - wake_up_interruptible(&uport->state->port.delta_msr_wait); -} - -/* check if the TX path is flushed, and if so clock off - * returns 0 did not clock off, need to retry (still sending final byte) - * -1 did not clock off, do not retry - * 1 if we clocked off - */ -static int msm_hs_check_clock_off_locked(struct uart_port *uport) -{ - unsigned long sr_status; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - struct circ_buf *tx_buf = &uport->state->xmit; - - /* Cancel if tx tty buffer is not empty, dma is in flight, - * or tx fifo is not empty, or rx fifo is not empty */ - if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF || - !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight || - (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) || - !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK)) { - return -1; - } - - /* Make sure the uart is finished with the last byte */ - sr_status = msm_hs_read(uport, UARTDM_SR_ADDR); - if (!(sr_status & UARTDM_SR_TXEMT_BMSK)) - return 0; /* retry */ - - /* Make sure forced RXSTALE flush complete */ - switch (msm_uport->clk_req_off_state) { - case CLK_REQ_OFF_START: - msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED; - msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT); - return 0; /* RXSTALE flush not complete - retry */ - case CLK_REQ_OFF_RXSTALE_ISSUED: - case CLK_REQ_OFF_FLUSH_ISSUED: - return 0; /* RXSTALE flush not complete - retry */ - case CLK_REQ_OFF_RXSTALE_FLUSHED: - break; /* continue */ - } - - if (msm_uport->rx.flush != FLUSH_SHUTDOWN) { - if (msm_uport->rx.flush == FLUSH_NONE) - msm_hs_stop_rx_locked(uport); - return 0; /* come back later to really clock off */ - } - - /* we really want to clock off */ - clk_disable(msm_uport->clk); - msm_uport->clk_state = MSM_HS_CLK_OFF; - - if (use_low_power_rx_wakeup(msm_uport)) { - msm_uport->rx_wakeup.ignore = 1; - enable_irq(msm_uport->rx_wakeup.irq); - } - return 1; -} - -static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer) -{ - unsigned long flags; - int ret = HRTIMER_NORESTART; - struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port, - clk_off_timer); - struct uart_port *uport = &msm_uport->uport; - - spin_lock_irqsave(&uport->lock, flags); - - if (!msm_hs_check_clock_off_locked(uport)) { - hrtimer_forward_now(timer, msm_uport->clk_off_delay); - ret = HRTIMER_RESTART; - } - - spin_unlock_irqrestore(&uport->lock, flags); - - return ret; -} - -static irqreturn_t msm_hs_isr(int irq, void *dev) -{ - unsigned long flags; - unsigned long isr_status; - struct msm_hs_port *msm_uport = dev; - struct uart_port *uport = &msm_uport->uport; - struct circ_buf *tx_buf = &uport->state->xmit; - struct msm_hs_tx *tx = &msm_uport->tx; - struct msm_hs_rx *rx = &msm_uport->rx; - - spin_lock_irqsave(&uport->lock, flags); - - isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR); - - /* Uart RX starting */ - if (isr_status & UARTDM_ISR_RXLEV_BMSK) { - msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - } - /* Stale rx interrupt */ - if (isr_status & UARTDM_ISR_RXSTALE_BMSK) { - msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); - - if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED) - msm_uport->clk_req_off_state = - CLK_REQ_OFF_FLUSH_ISSUED; - if (rx->flush == FLUSH_NONE) { - rx->flush = FLUSH_DATA_READY; - msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); - } - } - /* tx ready interrupt */ - if (isr_status & UARTDM_ISR_TX_READY_BMSK) { - /* Clear TX Ready */ - msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY); - - if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) { - msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, - msm_uport->imr_reg); - } - - /* Complete DMA TX transactions and submit new transactions */ - tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE; - - tx->dma_in_flight = 0; - - uport->icount.tx += tx->tx_count; - if (tx->tx_ready_int_en) - msm_hs_submit_tx_locked(uport); - - if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS) - uart_write_wakeup(uport); - } - if (isr_status & UARTDM_ISR_TXLEV_BMSK) { - /* TX FIFO is empty */ - msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - if (!msm_hs_check_clock_off_locked(uport)) - hrtimer_start(&msm_uport->clk_off_timer, - msm_uport->clk_off_delay, - HRTIMER_MODE_REL); - } - - /* Change in CTS interrupt */ - if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK) - msm_hs_handle_delta_cts_locked(uport); - - spin_unlock_irqrestore(&uport->lock, flags); - - return IRQ_HANDLED; -} - -void msm_hs_request_clock_off_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - if (msm_uport->clk_state == MSM_HS_CLK_ON) { - msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF; - msm_uport->clk_req_off_state = CLK_REQ_OFF_START; - if (!use_low_power_rx_wakeup(msm_uport)) - set_rfr_locked(uport, 0); - msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - } -} - -/** - * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart - * clock once pending TX is flushed and Rx DMA command is terminated. - * @uport: uart_port structure for the device instance. - * - * This functions puts the device into a partially active low power mode. It - * waits to complete all pending tx transactions, flushes ongoing Rx DMA - * command and terminates UART side Rx transaction, puts UART HW in non DMA - * mode and then clocks off the device. A client calls this when no UART - * data is expected. msm_request_clock_on() must be called before any further - * UART can be sent or received. - */ -void msm_hs_request_clock_off(struct uart_port *uport) -{ - unsigned long flags; - - spin_lock_irqsave(&uport->lock, flags); - msm_hs_request_clock_off_locked(uport); - spin_unlock_irqrestore(&uport->lock, flags); -} - -void msm_hs_request_clock_on_locked(struct uart_port *uport) -{ - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - unsigned int data; - - switch (msm_uport->clk_state) { - case MSM_HS_CLK_OFF: - clk_enable(msm_uport->clk); - disable_irq_nosync(msm_uport->rx_wakeup.irq); - /* fall-through */ - case MSM_HS_CLK_REQUEST_OFF: - if (msm_uport->rx.flush == FLUSH_STOP || - msm_uport->rx.flush == FLUSH_SHUTDOWN) { - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); - data = msm_hs_read(uport, UARTDM_DMEN_ADDR); - data |= UARTDM_RX_DM_EN_BMSK; - msm_hs_write(uport, UARTDM_DMEN_ADDR, data); - } - hrtimer_try_to_cancel(&msm_uport->clk_off_timer); - if (msm_uport->rx.flush == FLUSH_SHUTDOWN) - msm_hs_start_rx_locked(uport); - if (!use_low_power_rx_wakeup(msm_uport)) - set_rfr_locked(uport, 1); - if (msm_uport->rx.flush == FLUSH_STOP) - msm_uport->rx.flush = FLUSH_IGNORE; - msm_uport->clk_state = MSM_HS_CLK_ON; - break; - case MSM_HS_CLK_ON: - break; - case MSM_HS_CLK_PORT_OFF: - break; - } -} - -/** - * msm_hs_request_clock_on - Switch the device from partially active low - * power mode to fully active (i.e. clock on) mode. - * @uport: uart_port structure for the device. - * - * This function switches on the input clock, puts UART HW into DMA mode - * and enqueues an Rx DMA command if the device was in partially active - * mode. It has no effect if called with the device in inactive state. - */ -void msm_hs_request_clock_on(struct uart_port *uport) -{ - unsigned long flags; - - spin_lock_irqsave(&uport->lock, flags); - msm_hs_request_clock_on_locked(uport); - spin_unlock_irqrestore(&uport->lock, flags); -} - -static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev) -{ - unsigned int wakeup = 0; - unsigned long flags; - struct msm_hs_port *msm_uport = dev; - struct uart_port *uport = &msm_uport->uport; - - spin_lock_irqsave(&uport->lock, flags); - if (msm_uport->clk_state == MSM_HS_CLK_OFF) { - /* ignore the first irq - it is a pending irq that occurred - * before enable_irq() */ - if (msm_uport->rx_wakeup.ignore) - msm_uport->rx_wakeup.ignore = 0; - else - wakeup = 1; - } - - if (wakeup) { - /* the uart was clocked off during an rx, wake up and - * optionally inject char into tty rx */ - msm_hs_request_clock_on_locked(uport); - if (msm_uport->rx_wakeup.inject_rx) { - tty_insert_flip_char(&uport->state->port, - msm_uport->rx_wakeup.rx_to_inject, - TTY_NORMAL); - queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); - } - } - - spin_unlock_irqrestore(&uport->lock, flags); - - return IRQ_HANDLED; -} - -static const char *msm_hs_type(struct uart_port *port) -{ - return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL; -} - -/* Called when port is opened */ -static int msm_hs_startup(struct uart_port *uport) -{ - int ret; - int rfr_level; - unsigned long flags; - unsigned int data; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - struct circ_buf *tx_buf = &uport->state->xmit; - struct msm_hs_tx *tx = &msm_uport->tx; - struct msm_hs_rx *rx = &msm_uport->rx; - - rfr_level = uport->fifosize; - if (rfr_level > 16) - rfr_level -= 16; - - tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE, - DMA_TO_DEVICE); - - /* do not let tty layer execute RX in global workqueue, use a - * dedicated workqueue managed by this driver */ - uport->state->port.low_latency = 1; - - /* turn on uart clk */ - ret = msm_hs_init_clk_locked(uport); - if (unlikely(ret)) { - printk(KERN_ERR "Turning uartclk failed!\n"); - goto err_msm_hs_init_clk; - } - - /* Set auto RFR Level */ - data = msm_hs_read(uport, UARTDM_MR1_ADDR); - data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK; - data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK; - data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2)); - data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level); - msm_hs_write(uport, UARTDM_MR1_ADDR, data); - - /* Make sure RXSTALE count is non-zero */ - data = msm_hs_read(uport, UARTDM_IPR_ADDR); - if (!data) { - data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK; - msm_hs_write(uport, UARTDM_IPR_ADDR, data); - } - - /* Enable Data Mover Mode */ - data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK; - msm_hs_write(uport, UARTDM_DMEN_ADDR, data); - - /* Reset TX */ - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); - msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); - msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW); - /* Turn on Uart Receiver */ - msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK); - - /* Turn on Uart Transmitter */ - msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK); - - /* Initialize the tx */ - tx->tx_ready_int_en = 0; - tx->dma_in_flight = 0; - - tx->xfer.complete_func = msm_hs_dmov_tx_callback; - tx->xfer.execute_func = NULL; - - tx->command_ptr->cmd = CMD_LC | - CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX; - - tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) - | (MSM_UARTDM_BURST_SIZE); - - tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16); - - tx->command_ptr->dst_row_addr = - msm_uport->uport.mapbase + UARTDM_TF_ADDR; - - - /* Turn on Uart Receive */ - rx->xfer.complete_func = msm_hs_dmov_rx_callback; - rx->xfer.execute_func = NULL; - - rx->command_ptr->cmd = CMD_LC | - CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX; - - rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) - | (MSM_UARTDM_BURST_SIZE); - rx->command_ptr->row_offset = MSM_UARTDM_BURST_SIZE; - rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR; - - - msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK; - /* Enable reading the current CTS, no harm even if CTS is ignored */ - msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK; - - msm_hs_write(uport, UARTDM_TFWR_ADDR, 0); /* TXLEV on empty TX fifo */ - - - ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH, - "msm_hs_uart", msm_uport); - if (unlikely(ret)) { - printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n"); - goto err_request_irq; - } - if (use_low_power_rx_wakeup(msm_uport)) { - ret = request_irq(msm_uport->rx_wakeup.irq, - msm_hs_rx_wakeup_isr, - IRQF_TRIGGER_FALLING, - "msm_hs_rx_wakeup", msm_uport); - if (unlikely(ret)) { - printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n"); - free_irq(uport->irq, msm_uport); - goto err_request_irq; - } - disable_irq(msm_uport->rx_wakeup.irq); - } - - spin_lock_irqsave(&uport->lock, flags); - - msm_hs_write(uport, UARTDM_RFWR_ADDR, 0); - msm_hs_start_rx_locked(uport); - - spin_unlock_irqrestore(&uport->lock, flags); - ret = pm_runtime_set_active(uport->dev); - if (ret) - dev_err(uport->dev, "set active error:%d\n", ret); - pm_runtime_enable(uport->dev); - - return 0; - -err_request_irq: -err_msm_hs_init_clk: - dma_unmap_single(uport->dev, tx->dma_base, - UART_XMIT_SIZE, DMA_TO_DEVICE); - return ret; -} - -/* Initialize tx and rx data structures */ -static int uartdm_init_port(struct uart_port *uport) -{ - int ret = 0; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - struct msm_hs_tx *tx = &msm_uport->tx; - struct msm_hs_rx *rx = &msm_uport->rx; - - /* Allocate the command pointer. Needs to be 64 bit aligned */ - tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); - if (!tx->command_ptr) - return -ENOMEM; - - tx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA); - if (!tx->command_ptr_ptr) { - ret = -ENOMEM; - goto err_tx_command_ptr_ptr; - } - - tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr, - sizeof(dmov_box), DMA_TO_DEVICE); - tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev, - tx->command_ptr_ptr, - sizeof(u32), DMA_TO_DEVICE); - tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr); - - init_waitqueue_head(&rx->wait); - - rx->pool = dma_pool_create("rx_buffer_pool", uport->dev, - UARTDM_RX_BUF_SIZE, 16, 0); - if (!rx->pool) { - pr_err("%s(): cannot allocate rx_buffer_pool", __func__); - ret = -ENOMEM; - goto err_dma_pool_create; - } - - rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer); - if (!rx->buffer) { - pr_err("%s(): cannot allocate rx->buffer", __func__); - ret = -ENOMEM; - goto err_dma_pool_alloc; - } - - /* Allocate the command pointer. Needs to be 64 bit aligned */ - rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); - if (!rx->command_ptr) { - pr_err("%s(): cannot allocate rx->command_ptr", __func__); - ret = -ENOMEM; - goto err_rx_command_ptr; - } - - rx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA); - if (!rx->command_ptr_ptr) { - pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__); - ret = -ENOMEM; - goto err_rx_command_ptr_ptr; - } - - rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) | - (UARTDM_RX_BUF_SIZE >> 4); - - rx->command_ptr->dst_row_addr = rx->rbuffer; - - rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr, - sizeof(dmov_box), DMA_TO_DEVICE); - - *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr); - - rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr, - sizeof(u32), DMA_TO_DEVICE); - rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr); - - INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work); - - return ret; - -err_rx_command_ptr_ptr: - kfree(rx->command_ptr); -err_rx_command_ptr: - dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, - msm_uport->rx.rbuffer); -err_dma_pool_alloc: - dma_pool_destroy(msm_uport->rx.pool); -err_dma_pool_create: - dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr, - sizeof(u32), DMA_TO_DEVICE); - dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr, - sizeof(dmov_box), DMA_TO_DEVICE); - kfree(msm_uport->tx.command_ptr_ptr); -err_tx_command_ptr_ptr: - kfree(msm_uport->tx.command_ptr); - return ret; -} - -static int msm_hs_probe(struct platform_device *pdev) -{ - int ret; - struct uart_port *uport; - struct msm_hs_port *msm_uport; - struct resource *resource; - const struct msm_serial_hs_platform_data *pdata = - dev_get_platdata(&pdev->dev); - - if (pdev->id < 0 || pdev->id >= UARTDM_NR) { - printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); - return -EINVAL; - } - - msm_uport = &q_uart_port[pdev->id]; - uport = &msm_uport->uport; - - uport->dev = &pdev->dev; - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return -ENXIO; - - uport->mapbase = resource->start; - uport->irq = platform_get_irq(pdev, 0); - if (unlikely(uport->irq < 0)) - return -ENXIO; - - if (unlikely(irq_set_irq_wake(uport->irq, 1))) - return -ENXIO; - - if (pdata == NULL || pdata->rx_wakeup_irq < 0) - msm_uport->rx_wakeup.irq = -1; - else { - msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq; - msm_uport->rx_wakeup.ignore = 1; - msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup; - msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject; - - if (unlikely(msm_uport->rx_wakeup.irq < 0)) - return -ENXIO; - - if (unlikely(irq_set_irq_wake(msm_uport->rx_wakeup.irq, 1))) - return -ENXIO; - } - - if (pdata == NULL) - msm_uport->exit_lpm_cb = NULL; - else - msm_uport->exit_lpm_cb = pdata->exit_lpm_cb; - - resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, - "uartdm_channels"); - if (unlikely(!resource)) - return -ENXIO; - - msm_uport->dma_tx_channel = resource->start; - msm_uport->dma_rx_channel = resource->end; - - resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, - "uartdm_crci"); - if (unlikely(!resource)) - return -ENXIO; - - msm_uport->dma_tx_crci = resource->start; - msm_uport->dma_rx_crci = resource->end; - - uport->iotype = UPIO_MEM; - uport->fifosize = UART_FIFOSIZE; - uport->ops = &msm_hs_ops; - uport->flags = UPF_BOOT_AUTOCONF; - uport->uartclk = UARTCLK; - msm_uport->imr_reg = 0x0; - msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk"); - if (IS_ERR(msm_uport->clk)) - return PTR_ERR(msm_uport->clk); - - ret = uartdm_init_port(uport); - if (unlikely(ret)) - return ret; - - msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; - hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC, - HRTIMER_MODE_REL); - msm_uport->clk_off_timer.function = msm_hs_clk_off_retry; - msm_uport->clk_off_delay = ktime_set(0, 1000000); /* 1ms */ - - uport->line = pdev->id; - return uart_add_one_port(&msm_hs_driver, uport); -} - -static int __init msm_serial_hs_init(void) -{ - int ret, i; - - /* Init all UARTS as non-configured */ - for (i = 0; i < UARTDM_NR; i++) - q_uart_port[i].uport.type = PORT_UNKNOWN; - - msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs"); - if (unlikely(!msm_hs_workqueue)) - return -ENOMEM; - - ret = uart_register_driver(&msm_hs_driver); - if (unlikely(ret)) { - printk(KERN_ERR "%s failed to load\n", __func__); - goto err_uart_register_driver; - } - - ret = platform_driver_register(&msm_serial_hs_platform_driver); - if (ret) { - printk(KERN_ERR "%s failed to load\n", __func__); - goto err_platform_driver_register; - } - - return ret; - -err_platform_driver_register: - uart_unregister_driver(&msm_hs_driver); -err_uart_register_driver: - destroy_workqueue(msm_hs_workqueue); - return ret; -} -module_init(msm_serial_hs_init); - -/* - * Called by the upper layer when port is closed. - * - Disables the port - * - Unhook the ISR - */ -static void msm_hs_shutdown(struct uart_port *uport) -{ - unsigned long flags; - struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - - BUG_ON(msm_uport->rx.flush < FLUSH_STOP); - - spin_lock_irqsave(&uport->lock, flags); - clk_enable(msm_uport->clk); - - /* Disable the transmitter */ - msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK); - /* Disable the receiver */ - msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK); - - pm_runtime_disable(uport->dev); - pm_runtime_set_suspended(uport->dev); - - /* Free the interrupt */ - free_irq(uport->irq, msm_uport); - if (use_low_power_rx_wakeup(msm_uport)) - free_irq(msm_uport->rx_wakeup.irq, msm_uport); - - msm_uport->imr_reg = 0; - msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); - - wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN); - - clk_disable(msm_uport->clk); /* to balance local clk_enable() */ - if (msm_uport->clk_state != MSM_HS_CLK_OFF) - clk_disable(msm_uport->clk); /* to balance clk_state */ - msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; - - dma_unmap_single(uport->dev, msm_uport->tx.dma_base, - UART_XMIT_SIZE, DMA_TO_DEVICE); - - spin_unlock_irqrestore(&uport->lock, flags); - - if (cancel_work_sync(&msm_uport->rx.tty_work)) - msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work); -} - -static void __exit msm_serial_hs_exit(void) -{ - flush_workqueue(msm_hs_workqueue); - destroy_workqueue(msm_hs_workqueue); - platform_driver_unregister(&msm_serial_hs_platform_driver); - uart_unregister_driver(&msm_hs_driver); -} -module_exit(msm_serial_hs_exit); - -#ifdef CONFIG_PM -static int msm_hs_runtime_idle(struct device *dev) -{ - /* - * returning success from idle results in runtime suspend to be - * called - */ - return 0; -} - -static int msm_hs_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, struct - platform_device, dev); - struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; - - msm_hs_request_clock_on(&msm_uport->uport); - return 0; -} - -static int msm_hs_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, struct - platform_device, dev); - struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; - - msm_hs_request_clock_off(&msm_uport->uport); - return 0; -} -#else -#define msm_hs_runtime_idle NULL -#define msm_hs_runtime_resume NULL -#define msm_hs_runtime_suspend NULL -#endif - -static const struct dev_pm_ops msm_hs_dev_pm_ops = { - .runtime_suspend = msm_hs_runtime_suspend, - .runtime_resume = msm_hs_runtime_resume, - .runtime_idle = msm_hs_runtime_idle, -}; - -static struct platform_driver msm_serial_hs_platform_driver = { - .probe = msm_hs_probe, - .remove = msm_hs_remove, - .driver = { - .name = "msm_serial_hs", - .pm = &msm_hs_dev_pm_ops, - }, -}; - -static struct uart_driver msm_hs_driver = { - .owner = THIS_MODULE, - .driver_name = "msm_serial_hs", - .dev_name = "ttyHS", - .nr = UARTDM_NR, - .cons = 0, -}; - -static struct uart_ops msm_hs_ops = { - .tx_empty = msm_hs_tx_empty, - .set_mctrl = msm_hs_set_mctrl_locked, - .get_mctrl = msm_hs_get_mctrl_locked, - .stop_tx = msm_hs_stop_tx_locked, - .start_tx = msm_hs_start_tx_locked, - .stop_rx = msm_hs_stop_rx_locked, - .enable_ms = msm_hs_enable_ms_locked, - .break_ctl = msm_hs_break_ctl, - .startup = msm_hs_startup, - .shutdown = msm_hs_shutdown, - .set_termios = msm_hs_set_termios, - .pm = msm_hs_pm, - .type = msm_hs_type, - .config_port = msm_hs_config_port, - .release_port = msm_hs_release_port, - .request_port = msm_hs_request_port, -}; - -MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset"); -MODULE_VERSION("1.2"); -MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/msm_serial_hs.h b/include/linux/platform_data/msm_serial_hs.h deleted file mode 100644 index 98a2046f8b31..000000000000 --- a/include/linux/platform_data/msm_serial_hs.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2008 Google, Inc. - * Author: Nick Pelly - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_SERIAL_HS_H -#define __ASM_ARCH_MSM_SERIAL_HS_H - -#include - -/* API to request the uart clock off or on for low power management - * Clients should call request_clock_off() when no uart data is expected, - * and must call request_clock_on() before any further uart data can be - * received. */ -extern void msm_hs_request_clock_off(struct uart_port *uport); -extern void msm_hs_request_clock_on(struct uart_port *uport); - -/** - * struct msm_serial_hs_platform_data - * @rx_wakeup_irq: Rx activity irq - * @rx_to_inject: extra character to be inserted to Rx tty on wakeup - * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character - * @exit_lpm_cb: function called before every Tx transaction - * - * This is an optional structure required for UART Rx GPIO IRQ based - * wakeup from low power state. UART wakeup can be triggered by RX activity - * (using a wakeup GPIO on the UART RX pin). This should only be used if - * there is not a wakeup GPIO on the UART CTS, and the first RX byte is - * known (eg., with the Bluetooth Texas Instruments HCILL protocol), - * since the first RX byte will always be lost. RTS will be asserted even - * while the UART is clocked off in this mode of operation. - */ -struct msm_serial_hs_platform_data { - int rx_wakeup_irq; - unsigned char inject_rx_on_wakeup; - char rx_to_inject; - void (*exit_lpm_cb)(struct uart_port *); -}; - -#endif