diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
index 56cad0f5386c..63b23f87081d 100644
--- a/drivers/video/omap2/Kconfig
+++ b/drivers/video/omap2/Kconfig
@@ -5,7 +5,6 @@ if ARCH_OMAP2PLUS
 
 source "drivers/video/omap2/dss/Kconfig"
 source "drivers/video/omap2/omapfb/Kconfig"
-source "drivers/video/omap2/displays/Kconfig"
 source "drivers/video/omap2/displays-new/Kconfig"
 
 endif
diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
index 86873c2fbb27..bf8127df8c71 100644
--- a/drivers/video/omap2/Makefile
+++ b/drivers/video/omap2/Makefile
@@ -1,6 +1,5 @@
 obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
 
 obj-$(CONFIG_OMAP2_DSS) += dss/
-obj-y += displays/
 obj-y += displays-new/
 obj-$(CONFIG_FB_OMAP2) += omapfb/
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
deleted file mode 100644
index e80ac1c79561..000000000000
--- a/drivers/video/omap2/displays/Kconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-menu "OMAP2/3 Display Device Drivers (old device model)"
-        depends on OMAP2_DSS
-
-config PANEL_GENERIC_DPI
-        tristate "Generic DPI Panel"
-	depends on OMAP2_DSS_DPI
-        help
-	  Generic DPI panel driver.
-	  Supports DVI output for Beagle and OMAP3 SDP.
-	  Supports LCD Panel used in TI SDP3430 and EVM boards,
-	  OMAP3517 EVM boards and CM-T35.
-
-config PANEL_TFP410
-	tristate "TFP410 DPI-to-DVI chip"
-	depends on OMAP2_DSS_DPI && I2C
-	help
-	  Driver for TFP410 DPI-to-DVI chip. The driver uses i2c to read EDID
-	  information from the monitor.
-
-config PANEL_LGPHILIPS_LB035Q02
-	tristate "LG.Philips LB035Q02 LCD Panel"
-	depends on OMAP2_DSS_DPI && SPI
-	help
-	  LCD Panel used on the Gumstix Overo Palo35
-
-config PANEL_SHARP_LS037V7DW01
-        tristate "Sharp LS037V7DW01 LCD Panel"
-        depends on OMAP2_DSS_DPI
-        depends on BACKLIGHT_CLASS_DEVICE
-        help
-          LCD Panel used in TI's SDP3430 and EVM boards
-
-config PANEL_NEC_NL8048HL11_01B
-	tristate "NEC NL8048HL11-01B Panel"
-	depends on OMAP2_DSS_DPI
-	depends on SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-		This NEC NL8048HL11-01B panel is TFT LCD
-		used in the Zoom2/3/3630 sdp boards.
-
-config PANEL_PICODLP
-	tristate "TI PICO DLP mini-projector"
-	depends on OMAP2_DSS_DPI && I2C
-	help
-		A mini-projector used in TI's SDP4430 and EVM boards
-		For more info please visit http://www.dlp.com/projector/
-
-config PANEL_TAAL
-        tristate "Taal DSI Panel"
-        depends on OMAP2_DSS_DSI
-        depends on BACKLIGHT_CLASS_DEVICE
-        help
-          Taal DSI command mode panel from TPO.
-
-config PANEL_TPO_TD043MTEA1
-        tristate "TPO TD043MTEA1 LCD Panel"
-        depends on OMAP2_DSS_DPI && SPI
-        help
-          LCD Panel used in OMAP3 Pandora
-
-config PANEL_ACX565AKM
-	tristate "ACX565AKM Panel"
-	depends on OMAP2_DSS_SDI && SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  This is the LCD panel used on Nokia N900
-
-config PANEL_N8X0
-	tristate "N8X0 Panel"
-	depends on OMAP2_DSS_RFBI && SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  This is the LCD panel used on Nokia N8x0
-endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
deleted file mode 100644
index 58a5176b07b0..000000000000
--- a/drivers/video/omap2/displays/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
-obj-$(CONFIG_PANEL_TFP410) += panel-tfp410.o
-obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
-obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
-obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
-
-obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
-obj-$(CONFIG_PANEL_PICODLP) +=  panel-picodlp.o
-obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
-obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
-obj-$(CONFIG_PANEL_N8X0) += panel-n8x0.o
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
deleted file mode 100644
index 3fd100fc853e..000000000000
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ /dev/null
@@ -1,798 +0,0 @@
-/*
- * Support for ACX565AKM LCD Panel used on Nokia N900
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Original Driver Author: Imre Deak <imre.deak@nokia.com>
- * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
- * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#define MIPID_CMD_READ_DISP_ID		0x04
-#define MIPID_CMD_READ_RED		0x06
-#define MIPID_CMD_READ_GREEN		0x07
-#define MIPID_CMD_READ_BLUE		0x08
-#define MIPID_CMD_READ_DISP_STATUS	0x09
-#define MIPID_CMD_RDDSDR		0x0F
-#define MIPID_CMD_SLEEP_IN		0x10
-#define MIPID_CMD_SLEEP_OUT		0x11
-#define MIPID_CMD_DISP_OFF		0x28
-#define MIPID_CMD_DISP_ON		0x29
-#define MIPID_CMD_WRITE_DISP_BRIGHTNESS	0x51
-#define MIPID_CMD_READ_DISP_BRIGHTNESS	0x52
-#define MIPID_CMD_WRITE_CTRL_DISP	0x53
-
-#define CTRL_DISP_BRIGHTNESS_CTRL_ON	(1 << 5)
-#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON	(1 << 4)
-#define CTRL_DISP_BACKLIGHT_ON		(1 << 2)
-#define CTRL_DISP_AUTO_BRIGHTNESS_ON	(1 << 1)
-
-#define MIPID_CMD_READ_CTRL_DISP	0x54
-#define MIPID_CMD_WRITE_CABC		0x55
-#define MIPID_CMD_READ_CABC		0x56
-
-#define MIPID_VER_LPH8923		3
-#define MIPID_VER_LS041Y3		4
-#define MIPID_VER_L4F00311		8
-#define MIPID_VER_ACX565AKM		9
-
-struct acx565akm_device {
-	char		*name;
-	int		enabled;
-	int		model;
-	int		revision;
-	u8		display_id[3];
-	unsigned	has_bc:1;
-	unsigned	has_cabc:1;
-	unsigned	cabc_mode;
-	unsigned long	hw_guard_end;		/* next value of jiffies
-						   when we can issue the
-						   next sleep in/out command */
-	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
-
-	struct spi_device	*spi;
-	struct mutex		mutex;
-
-	struct omap_dss_device	*dssdev;
-	struct backlight_device *bl_dev;
-};
-
-static struct acx565akm_device acx_dev;
-static int acx565akm_bl_update_status(struct backlight_device *dev);
-
-/*--------------------MIPID interface-----------------------------*/
-
-static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
-			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	struct spi_message	m;
-	struct spi_transfer	*x, xfer[5];
-	int			r;
-
-	BUG_ON(md->spi == NULL);
-
-	spi_message_init(&m);
-
-	memset(xfer, 0, sizeof(xfer));
-	x = &xfer[0];
-
-	cmd &=  0xff;
-	x->tx_buf = &cmd;
-	x->bits_per_word = 9;
-	x->len = 2;
-
-	if (rlen > 1 && wlen == 0) {
-		/*
-		 * Between the command and the response data there is a
-		 * dummy clock cycle. Add an extra bit after the command
-		 * word to account for this.
-		 */
-		x->bits_per_word = 10;
-		cmd <<= 1;
-	}
-	spi_message_add_tail(x, &m);
-
-	if (wlen) {
-		x++;
-		x->tx_buf = wbuf;
-		x->len = wlen;
-		x->bits_per_word = 9;
-		spi_message_add_tail(x, &m);
-	}
-
-	if (rlen) {
-		x++;
-		x->rx_buf	= rbuf;
-		x->len		= rlen;
-		spi_message_add_tail(x, &m);
-	}
-
-	r = spi_sync(md->spi, &m);
-	if (r < 0)
-		dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
-}
-
-static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
-{
-	acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
-}
-
-static inline void acx565akm_write(struct acx565akm_device *md,
-			       int reg, const u8 *buf, int len)
-{
-	acx565akm_transfer(md, reg, buf, len, NULL, 0);
-}
-
-static inline void acx565akm_read(struct acx565akm_device *md,
-			      int reg, u8 *buf, int len)
-{
-	acx565akm_transfer(md, reg, NULL, 0, buf, len);
-}
-
-static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
-{
-	md->hw_guard_wait = msecs_to_jiffies(guard_msec);
-	md->hw_guard_end = jiffies + md->hw_guard_wait;
-}
-
-static void hw_guard_wait(struct acx565akm_device *md)
-{
-	unsigned long wait = md->hw_guard_end - jiffies;
-
-	if ((long)wait > 0 && wait <= md->hw_guard_wait) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(wait);
-	}
-}
-
-/*----------------------MIPID wrappers----------------------------*/
-
-static void set_sleep_mode(struct acx565akm_device *md, int on)
-{
-	int cmd;
-
-	if (on)
-		cmd = MIPID_CMD_SLEEP_IN;
-	else
-		cmd = MIPID_CMD_SLEEP_OUT;
-	/*
-	 * We have to keep 120msec between sleep in/out commands.
-	 * (8.2.15, 8.2.16).
-	 */
-	hw_guard_wait(md);
-	acx565akm_cmd(md, cmd);
-	hw_guard_start(md, 120);
-}
-
-static void set_display_state(struct acx565akm_device *md, int enabled)
-{
-	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
-
-	acx565akm_cmd(md, cmd);
-}
-
-static int panel_enabled(struct acx565akm_device *md)
-{
-	u32 disp_status;
-	int enabled;
-
-	acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
-	disp_status = __be32_to_cpu(disp_status);
-	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
-	dev_dbg(&md->spi->dev,
-		"LCD panel %senabled by bootloader (status 0x%04x)\n",
-		enabled ? "" : "not ", disp_status);
-	return enabled;
-}
-
-static int panel_detect(struct acx565akm_device *md)
-{
-	acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
-	dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
-		md->display_id[0], md->display_id[1], md->display_id[2]);
-
-	switch (md->display_id[0]) {
-	case 0x10:
-		md->model = MIPID_VER_ACX565AKM;
-		md->name = "acx565akm";
-		md->has_bc = 1;
-		md->has_cabc = 1;
-		break;
-	case 0x29:
-		md->model = MIPID_VER_L4F00311;
-		md->name = "l4f00311";
-		break;
-	case 0x45:
-		md->model = MIPID_VER_LPH8923;
-		md->name = "lph8923";
-		break;
-	case 0x83:
-		md->model = MIPID_VER_LS041Y3;
-		md->name = "ls041y3";
-		break;
-	default:
-		md->name = "unknown";
-		dev_err(&md->spi->dev, "invalid display ID\n");
-		return -ENODEV;
-	}
-
-	md->revision = md->display_id[1];
-
-	dev_info(&md->spi->dev, "omapfb: %s rev %02x LCD detected\n",
-			md->name, md->revision);
-
-	return 0;
-}
-
-/*----------------------Backlight Control-------------------------*/
-
-static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
-{
-	u16 ctrl;
-
-	acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
-	if (enable) {
-		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
-			CTRL_DISP_BACKLIGHT_ON;
-	} else {
-		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
-			  CTRL_DISP_BACKLIGHT_ON);
-	}
-
-	ctrl |= 1 << 8;
-	acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
-}
-
-static void set_cabc_mode(struct acx565akm_device *md, unsigned mode)
-{
-	u16 cabc_ctrl;
-
-	md->cabc_mode = mode;
-	if (!md->enabled)
-		return;
-	cabc_ctrl = 0;
-	acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
-	cabc_ctrl &= ~3;
-	cabc_ctrl |= (1 << 8) | (mode & 3);
-	acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
-}
-
-static unsigned get_cabc_mode(struct acx565akm_device *md)
-{
-	return md->cabc_mode;
-}
-
-static unsigned get_hw_cabc_mode(struct acx565akm_device *md)
-{
-	u8 cabc_ctrl;
-
-	acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
-	return cabc_ctrl & 3;
-}
-
-static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
-{
-	int bv;
-
-	bv = level | (1 << 8);
-	acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
-
-	if (level)
-		enable_backlight_ctrl(md, 1);
-	else
-		enable_backlight_ctrl(md, 0);
-}
-
-static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
-{
-	u8 bv;
-
-	acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
-
-	return bv;
-}
-
-
-static int acx565akm_bl_update_status(struct backlight_device *dev)
-{
-	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
-	int r;
-	int level;
-
-	dev_dbg(&md->spi->dev, "%s\n", __func__);
-
-	mutex_lock(&md->mutex);
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
-
-	r = 0;
-	if (md->has_bc)
-		acx565akm_set_brightness(md, level);
-	else
-		r = -ENODEV;
-
-	mutex_unlock(&md->mutex);
-
-	return r;
-}
-
-static int acx565akm_bl_get_intensity(struct backlight_device *dev)
-{
-	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
-
-	dev_dbg(&dev->dev, "%s\n", __func__);
-
-	if (!md->has_bc)
-		return -ENODEV;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK) {
-		if (md->has_bc)
-			return acx565akm_get_actual_brightness(md);
-		else
-			return dev->props.brightness;
-	}
-
-	return 0;
-}
-
-static const struct backlight_ops acx565akm_bl_ops = {
-	.get_brightness = acx565akm_bl_get_intensity,
-	.update_status  = acx565akm_bl_update_status,
-};
-
-/*--------------------Auto Brightness control via Sysfs---------------------*/
-
-static const char *cabc_modes[] = {
-	"off",		/* always used when CABC is not supported */
-	"ui",
-	"still-image",
-	"moving-image",
-};
-
-static ssize_t show_cabc_mode(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct acx565akm_device *md = dev_get_drvdata(dev);
-	const char *mode_str;
-	int mode;
-	int len;
-
-	if (!md->has_cabc)
-		mode = 0;
-	else
-		mode = get_cabc_mode(md);
-	mode_str = "unknown";
-	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
-		mode_str = cabc_modes[mode];
-	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
-
-	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
-}
-
-static ssize_t store_cabc_mode(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct acx565akm_device *md = dev_get_drvdata(dev);
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
-		const char *mode_str = cabc_modes[i];
-		int cmp_len = strlen(mode_str);
-
-		if (count > 0 && buf[count - 1] == '\n')
-			count--;
-		if (count != cmp_len)
-			continue;
-
-		if (strncmp(buf, mode_str, cmp_len) == 0)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(cabc_modes))
-		return -EINVAL;
-
-	if (!md->has_cabc && i != 0)
-		return -EINVAL;
-
-	mutex_lock(&md->mutex);
-	set_cabc_mode(md, i);
-	mutex_unlock(&md->mutex);
-
-	return count;
-}
-
-static ssize_t show_cabc_available_modes(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct acx565akm_device *md = dev_get_drvdata(dev);
-	int len;
-	int i;
-
-	if (!md->has_cabc)
-		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
-
-	for (i = 0, len = 0;
-	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
-		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
-			i ? " " : "", cabc_modes[i],
-			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
-
-	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
-}
-
-static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
-		show_cabc_mode, store_cabc_mode);
-static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
-		show_cabc_available_modes, NULL);
-
-static struct attribute *bldev_attrs[] = {
-	&dev_attr_cabc_mode.attr,
-	&dev_attr_cabc_available_modes.attr,
-	NULL,
-};
-
-static struct attribute_group bldev_attr_group = {
-	.attrs = bldev_attrs,
-};
-
-
-/*---------------------------ACX Panel----------------------------*/
-
-static int acx_get_recommended_bpp(struct omap_dss_device *dssdev)
-{
-	return 16;
-}
-
-static struct omap_video_timings acx_panel_timings = {
-	.x_res		= 800,
-	.y_res		= 480,
-	.pixel_clock	= 24000,
-	.hfp		= 28,
-	.hsw		= 4,
-	.hbp		= 24,
-	.vfp		= 3,
-	.vsw		= 3,
-	.vbp		= 4,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-static struct panel_acx565akm_data *get_panel_data(struct omap_dss_device *dssdev)
-{
-	return (struct panel_acx565akm_data *) dssdev->data;
-}
-
-static int acx_panel_probe(struct omap_dss_device *dssdev)
-{
-	int r;
-	struct acx565akm_device *md = &acx_dev;
-	struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
-	struct backlight_device *bldev;
-	int max_brightness, brightness;
-	struct backlight_properties props;
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-
-	if (!panel_data)
-		return -EINVAL;
-
-	/* FIXME AC bias ? */
-	dssdev->panel.timings = acx_panel_timings;
-
-	if (gpio_is_valid(panel_data->reset_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, panel_data->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd reset");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(panel_data->reset_gpio))
-		gpio_set_value(panel_data->reset_gpio, 1);
-
-	/*
-	 * After reset we have to wait 5 msec before the first
-	 * command can be sent.
-	 */
-	msleep(5);
-
-	md->enabled = panel_enabled(md);
-
-	r = panel_detect(md);
-	if (r) {
-		dev_err(dssdev->dev, "%s panel detect error\n", __func__);
-		if (!md->enabled && gpio_is_valid(panel_data->reset_gpio))
-			gpio_set_value(panel_data->reset_gpio, 0);
-
-		return r;
-	}
-
-	mutex_lock(&acx_dev.mutex);
-	acx_dev.dssdev = dssdev;
-	mutex_unlock(&acx_dev.mutex);
-
-	if (!md->enabled) {
-		if (gpio_is_valid(panel_data->reset_gpio))
-			gpio_set_value(panel_data->reset_gpio, 0);
-	}
-
-	/*------- Backlight control --------*/
-
-	memset(&props, 0, sizeof(props));
-	props.fb_blank = FB_BLANK_UNBLANK;
-	props.power = FB_BLANK_UNBLANK;
-	props.type = BACKLIGHT_RAW;
-
-	bldev = backlight_device_register("acx565akm", &md->spi->dev,
-			md, &acx565akm_bl_ops, &props);
-	md->bl_dev = bldev;
-	if (md->has_cabc) {
-		r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
-		if (r) {
-			dev_err(&bldev->dev,
-				"%s failed to create sysfs files\n", __func__);
-			backlight_device_unregister(bldev);
-			return r;
-		}
-		md->cabc_mode = get_hw_cabc_mode(md);
-	}
-
-	max_brightness = 255;
-
-	if (md->has_bc)
-		brightness = acx565akm_get_actual_brightness(md);
-	else
-		brightness = 0;
-
-	bldev->props.max_brightness = max_brightness;
-	bldev->props.brightness = brightness;
-
-	acx565akm_bl_update_status(bldev);
-	return 0;
-}
-
-static void acx_panel_remove(struct omap_dss_device *dssdev)
-{
-	struct acx565akm_device *md = &acx_dev;
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-	sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
-	backlight_device_unregister(md->bl_dev);
-	mutex_lock(&acx_dev.mutex);
-	acx_dev.dssdev = NULL;
-	mutex_unlock(&acx_dev.mutex);
-}
-
-static int acx_panel_power_on(struct omap_dss_device *dssdev)
-{
-	struct acx565akm_device *md = &acx_dev;
-	struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
-	int r;
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	mutex_lock(&md->mutex);
-
-	omapdss_sdi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_sdi_set_datapairs(dssdev, dssdev->phy.sdi.datapairs);
-
-	r = omapdss_sdi_display_enable(dssdev);
-	if (r) {
-		pr_err("%s sdi enable failed\n", __func__);
-		goto fail_unlock;
-	}
-
-	/*FIXME tweak me */
-	msleep(50);
-
-	if (gpio_is_valid(panel_data->reset_gpio))
-		gpio_set_value(panel_data->reset_gpio, 1);
-
-	if (md->enabled) {
-		dev_dbg(&md->spi->dev, "panel already enabled\n");
-		mutex_unlock(&md->mutex);
-		return 0;
-	}
-
-	/*
-	 * We have to meet all the following delay requirements:
-	 * 1. tRW: reset pulse width 10usec (7.12.1)
-	 * 2. tRT: reset cancel time 5msec (7.12.1)
-	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
-	 *    case (7.6.2)
-	 * 4. 120msec before the sleep out command (7.12.1)
-	 */
-	msleep(120);
-
-	set_sleep_mode(md, 0);
-	md->enabled = 1;
-
-	/* 5msec between sleep out and the next command. (8.2.16) */
-	msleep(5);
-	set_display_state(md, 1);
-	set_cabc_mode(md, md->cabc_mode);
-
-	mutex_unlock(&md->mutex);
-
-	return acx565akm_bl_update_status(md->bl_dev);
-
-fail_unlock:
-	mutex_unlock(&md->mutex);
-	return r;
-}
-
-static void acx_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct acx565akm_device *md = &acx_dev;
-	struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	mutex_lock(&md->mutex);
-
-	if (!md->enabled) {
-		mutex_unlock(&md->mutex);
-		return;
-	}
-	set_display_state(md, 0);
-	set_sleep_mode(md, 1);
-	md->enabled = 0;
-	/*
-	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
-	 * ~50msec) after sending the sleep in command and asserting the
-	 * reset signal. We probably could assert the reset w/o the delay
-	 * but we still delay to avoid possible artifacts. (7.6.1)
-	 */
-	msleep(50);
-
-	if (gpio_is_valid(panel_data->reset_gpio))
-		gpio_set_value(panel_data->reset_gpio, 0);
-
-	/* FIXME need to tweak this delay */
-	msleep(100);
-
-	omapdss_sdi_display_disable(dssdev);
-
-	mutex_unlock(&md->mutex);
-}
-
-static int acx_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-	r = acx_panel_power_on(dssdev);
-
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-	return 0;
-}
-
-static void acx_panel_disable(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-	acx_panel_power_off(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void acx_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	omapdss_sdi_set_timings(dssdev, timings);
-
-	dssdev->panel.timings = *timings;
-}
-
-static int acx_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	return 0;
-}
-
-
-static struct omap_dss_driver acx_panel_driver = {
-	.probe		= acx_panel_probe,
-	.remove		= acx_panel_remove,
-
-	.enable		= acx_panel_enable,
-	.disable	= acx_panel_disable,
-
-	.set_timings	= acx_panel_set_timings,
-	.check_timings	= acx_panel_check_timings,
-
-	.get_recommended_bpp = acx_get_recommended_bpp,
-
-	.driver         = {
-		.name   = "panel-acx565akm",
-		.owner  = THIS_MODULE,
-	},
-};
-
-/*--------------------SPI probe-------------------------*/
-
-static int acx565akm_spi_probe(struct spi_device *spi)
-{
-	struct acx565akm_device *md = &acx_dev;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->mode = SPI_MODE_3;
-	md->spi = spi;
-	mutex_init(&md->mutex);
-	dev_set_drvdata(&spi->dev, md);
-
-	omap_dss_register_driver(&acx_panel_driver);
-
-	return 0;
-}
-
-static int acx565akm_spi_remove(struct spi_device *spi)
-{
-	struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
-
-	dev_dbg(&md->spi->dev, "%s\n", __func__);
-	omap_dss_unregister_driver(&acx_panel_driver);
-
-	return 0;
-}
-
-static struct spi_driver acx565akm_spi_driver = {
-	.driver = {
-		.name	= "acx565akm",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= acx565akm_spi_probe,
-	.remove	= acx565akm_spi_remove,
-};
-
-module_spi_driver(acx565akm_spi_driver);
-
-MODULE_AUTHOR("Nokia Corporation");
-MODULE_DESCRIPTION("acx565akm LCD Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
deleted file mode 100644
index bebebd45847f..000000000000
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- * Generic DPI Panels support
- *
- * Copyright (C) 2010 Canonical Ltd.
- * Author: Bryan Wu <bryan.wu@canonical.com>
- *
- * LCD panel driver for Sharp LQ043T1DG01
- *
- * Copyright (C) 2009 Texas Instruments Inc
- * Author: Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * LCD panel driver for Toppoly TDO35S
- *
- * Copyright (C) 2009 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <video/omapdss.h>
-
-#include <video/omap-panel-data.h>
-
-struct panel_config {
-	struct omap_video_timings timings;
-
-	int power_on_delay;
-	int power_off_delay;
-
-	/*
-	 * Used to match device to panel configuration
-	 * when use generic panel driver
-	 */
-	const char *name;
-};
-
-/* Panel configurations */
-static struct panel_config generic_dpi_panels[] = {
-	/* Sharp LQ043T1DG01 */
-	{
-		{
-			.x_res		= 480,
-			.y_res		= 272,
-
-			.pixel_clock	= 9000,
-
-			.hsw		= 42,
-			.hfp		= 3,
-			.hbp		= 2,
-
-			.vsw		= 11,
-			.vfp		= 3,
-			.vbp		= 2,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 50,
-		.power_off_delay	= 100,
-		.name			= "sharp_lq",
-	},
-
-	/* Sharp LS037V7DW01 */
-	{
-		{
-			.x_res		= 480,
-			.y_res		= 640,
-
-			.pixel_clock	= 19200,
-
-			.hsw		= 2,
-			.hfp		= 1,
-			.hbp		= 28,
-
-			.vsw		= 1,
-			.vfp		= 1,
-			.vbp		= 1,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 50,
-		.power_off_delay	= 100,
-		.name			= "sharp_ls",
-	},
-
-	/* Toppoly TDO35S */
-	{
-		{
-			.x_res		= 480,
-			.y_res		= 640,
-
-			.pixel_clock	= 26000,
-
-			.hfp		= 104,
-			.hsw		= 8,
-			.hbp		= 8,
-
-			.vfp		= 4,
-			.vsw		= 2,
-			.vbp		= 2,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-		},
-		.power_on_delay		= 0,
-		.power_off_delay	= 0,
-		.name			= "toppoly_tdo35s",
-	},
-
-	/* Samsung LTE430WQ-F0C */
-	{
-		{
-			.x_res		= 480,
-			.y_res		= 272,
-
-			.pixel_clock	= 9200,
-
-			.hfp		= 8,
-			.hsw		= 41,
-			.hbp		= 45 - 41,
-
-			.vfp		= 4,
-			.vsw		= 10,
-			.vbp		= 12 - 10,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 0,
-		.power_off_delay	= 0,
-		.name			= "samsung_lte430wq_f0c",
-	},
-
-	/* Seiko 70WVW1TZ3Z3 */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 480,
-
-			.pixel_clock	= 33000,
-
-			.hsw		= 128,
-			.hfp		= 10,
-			.hbp		= 10,
-
-			.vsw		= 2,
-			.vfp		= 4,
-			.vbp		= 11,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 0,
-		.power_off_delay	= 0,
-		.name			= "seiko_70wvw1tz3",
-	},
-
-	/* Powertip PH480272T */
-	{
-		{
-			.x_res		= 480,
-			.y_res		= 272,
-
-			.pixel_clock	= 9000,
-
-			.hsw		= 40,
-			.hfp		= 2,
-			.hbp		= 2,
-
-			.vsw		= 10,
-			.vfp		= 2,
-			.vbp		= 2,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 0,
-		.power_off_delay	= 0,
-		.name			= "powertip_ph480272t",
-	},
-
-	/* Innolux AT070TN83 */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 480,
-
-			.pixel_clock	= 40000,
-
-			.hsw		= 48,
-			.hfp		= 1,
-			.hbp		= 1,
-
-			.vsw		= 3,
-			.vfp		= 12,
-			.vbp		= 25,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 0,
-		.power_off_delay	= 0,
-		.name			= "innolux_at070tn83",
-	},
-
-	/* NEC NL2432DR22-11B */
-	{
-		{
-			.x_res		= 240,
-			.y_res		= 320,
-
-			.pixel_clock	= 5400,
-
-			.hsw		= 3,
-			.hfp		= 3,
-			.hbp		= 39,
-
-			.vsw		= 1,
-			.vfp		= 2,
-			.vbp		= 7,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "nec_nl2432dr22-11b",
-	},
-
-	/* Unknown panel used in OMAP H4 */
-	{
-		{
-			.x_res		= 240,
-			.y_res		= 320,
-
-			.pixel_clock	= 6250,
-
-			.hsw		= 15,
-			.hfp		= 15,
-			.hbp		= 60,
-
-			.vsw		= 1,
-			.vfp		= 1,
-			.vbp		= 1,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "h4",
-	},
-
-	/* FocalTech ETM070003DH6 */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 480,
-
-			.pixel_clock	= 28000,
-
-			.hsw		= 48,
-			.hfp		= 40,
-			.hbp		= 40,
-
-			.vsw		= 3,
-			.vfp		= 13,
-			.vbp		= 29,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "focaltech_etm070003dh6",
-	},
-
-	/* Microtips Technologies - UMSH-8173MD */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 480,
-
-			.pixel_clock	= 34560,
-
-			.hsw		= 13,
-			.hfp		= 101,
-			.hbp		= 101,
-
-			.vsw		= 23,
-			.vfp		= 1,
-			.vbp		= 1,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.power_on_delay		= 0,
-		.power_off_delay	= 0,
-		.name			= "microtips_umsh_8173md",
-	},
-
-	/* OrtusTech COM43H4M10XTC */
-	{
-		{
-			.x_res		= 480,
-			.y_res		= 272,
-
-			.pixel_clock	= 8000,
-
-			.hsw		= 41,
-			.hfp		= 8,
-			.hbp		= 4,
-
-			.vsw		= 10,
-			.vfp		= 4,
-			.vbp		= 2,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "ortustech_com43h4m10xtc",
-	},
-
-	/* Innolux AT080TN52 */
-	{
-		{
-			.x_res = 800,
-			.y_res = 600,
-
-			.pixel_clock	= 41142,
-
-			.hsw		= 20,
-			.hfp		= 210,
-			.hbp		= 46,
-
-			.vsw		= 10,
-			.vfp		= 12,
-			.vbp		= 23,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "innolux_at080tn52",
-	},
-
-	/* Mitsubishi AA084SB01 */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 600,
-			.pixel_clock	= 40000,
-
-			.hsw		= 1,
-			.hfp		= 254,
-			.hbp		= 1,
-
-			.vsw		= 1,
-			.vfp		= 26,
-			.vbp		= 1,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "mitsubishi_aa084sb01",
-	},
-	/* EDT ET0500G0DH6 */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 480,
-			.pixel_clock	= 33260,
-
-			.hsw		= 128,
-			.hfp		= 216,
-			.hbp		= 40,
-
-			.vsw		= 2,
-			.vfp		= 35,
-			.vbp		= 10,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "edt_et0500g0dh6",
-	},
-
-	/* Prime-View PD050VL1 */
-	{
-		{
-			.x_res		= 640,
-			.y_res		= 480,
-
-			.pixel_clock	= 25000,
-
-			.hsw		= 96,
-			.hfp		= 18,
-			.hbp		= 46,
-
-			.vsw		= 2,
-			.vfp		= 10,
-			.vbp		= 33,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "primeview_pd050vl1",
-	},
-
-	/* Prime-View PM070WL4 */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 480,
-
-			.pixel_clock	= 32000,
-
-			.hsw		= 128,
-			.hfp		= 42,
-			.hbp		= 86,
-
-			.vsw		= 2,
-			.vfp		= 10,
-			.vbp		= 33,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "primeview_pm070wl4",
-	},
-
-	/* Prime-View PD104SLF */
-	{
-		{
-			.x_res		= 800,
-			.y_res		= 600,
-
-			.pixel_clock	= 40000,
-
-			.hsw		= 128,
-			.hfp		= 42,
-			.hbp		= 86,
-
-			.vsw		= 4,
-			.vfp		= 1,
-			.vbp		= 23,
-
-			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-		},
-		.name			= "primeview_pd104slf",
-	},
-};
-
-struct panel_drv_data {
-
-	struct omap_dss_device *dssdev;
-
-	struct panel_config *panel_config;
-
-	struct mutex lock;
-};
-
-static inline struct panel_generic_dpi_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct panel_generic_dpi_data *) dssdev->data;
-}
-
-static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
-{
-	int r, i;
-	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-	struct panel_config *panel_config = drv_data->panel_config;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	/* wait couple of vsyncs until enabling the LCD */
-	if (panel_config->power_on_delay)
-		msleep(panel_config->power_on_delay);
-
-	for (i = 0; i < panel_data->num_gpios; ++i) {
-		gpio_set_value_cansleep(panel_data->gpios[i],
-				panel_data->gpio_invert[i] ? 0 : 1);
-	}
-
-	return 0;
-
-err0:
-	return r;
-}
-
-static void generic_dpi_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-	struct panel_config *panel_config = drv_data->panel_config;
-	int i;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	for (i = panel_data->num_gpios - 1; i >= 0; --i) {
-		gpio_set_value_cansleep(panel_data->gpios[i],
-				panel_data->gpio_invert[i] ? 1 : 0);
-	}
-
-	/* wait couple of vsyncs after disabling the LCD */
-	if (panel_config->power_off_delay)
-		msleep(panel_config->power_off_delay);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
-{
-	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
-	struct panel_config *panel_config = NULL;
-	struct panel_drv_data *drv_data = NULL;
-	int i, r;
-
-	dev_dbg(dssdev->dev, "probe\n");
-
-	if (!panel_data || !panel_data->name)
-		return -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(generic_dpi_panels); i++) {
-		if (strcmp(panel_data->name, generic_dpi_panels[i].name) == 0) {
-			panel_config = &generic_dpi_panels[i];
-			break;
-		}
-	}
-
-	if (!panel_config)
-		return -EINVAL;
-
-	for (i = 0; i < panel_data->num_gpios; ++i) {
-		r = devm_gpio_request_one(dssdev->dev, panel_data->gpios[i],
-				panel_data->gpio_invert[i] ?
-				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-				"panel gpio");
-		if (r)
-			return r;
-	}
-
-	dssdev->panel.timings = panel_config->timings;
-
-	drv_data = devm_kzalloc(dssdev->dev, sizeof(*drv_data), GFP_KERNEL);
-	if (!drv_data)
-		return -ENOMEM;
-
-	drv_data->dssdev = dssdev;
-	drv_data->panel_config = panel_config;
-
-	mutex_init(&drv_data->lock);
-
-	dev_set_drvdata(dssdev->dev, drv_data);
-
-	return 0;
-}
-
-static void __exit generic_dpi_panel_remove(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "remove\n");
-
-	dev_set_drvdata(dssdev->dev, NULL);
-}
-
-static int generic_dpi_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&drv_data->lock);
-
-	r = generic_dpi_panel_power_on(dssdev);
-	if (r)
-		goto err;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-err:
-	mutex_unlock(&drv_data->lock);
-
-	return r;
-}
-
-static void generic_dpi_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&drv_data->lock);
-
-	generic_dpi_panel_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&drv_data->lock);
-}
-
-static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&drv_data->lock);
-
-	omapdss_dpi_set_timings(dssdev, timings);
-
-	dssdev->panel.timings = *timings;
-
-	mutex_unlock(&drv_data->lock);
-}
-
-static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&drv_data->lock);
-
-	*timings = dssdev->panel.timings;
-
-	mutex_unlock(&drv_data->lock);
-}
-
-static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&drv_data->lock);
-
-	r = dpi_check_timings(dssdev, timings);
-
-	mutex_unlock(&drv_data->lock);
-
-	return r;
-}
-
-static struct omap_dss_driver dpi_driver = {
-	.probe		= generic_dpi_panel_probe,
-	.remove		= __exit_p(generic_dpi_panel_remove),
-
-	.enable		= generic_dpi_panel_enable,
-	.disable	= generic_dpi_panel_disable,
-
-	.set_timings	= generic_dpi_panel_set_timings,
-	.get_timings	= generic_dpi_panel_get_timings,
-	.check_timings	= generic_dpi_panel_check_timings,
-
-	.driver         = {
-		.name   = "generic_dpi_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init generic_dpi_panel_drv_init(void)
-{
-	return omap_dss_register_driver(&dpi_driver);
-}
-
-static void __exit generic_dpi_panel_drv_exit(void)
-{
-	omap_dss_unregister_driver(&dpi_driver);
-}
-
-module_init(generic_dpi_panel_drv_init);
-module_exit(generic_dpi_panel_drv_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
deleted file mode 100644
index 6c51430ddb37..000000000000
--- a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * LCD panel driver for LG.Philips LB035Q02
- *
- * Author: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct lb035q02_data {
-	struct mutex lock;
-};
-
-static struct omap_video_timings lb035q02_timings = {
-	.x_res = 320,
-	.y_res = 240,
-
-	.pixel_clock	= 6500,
-
-	.hsw		= 2,
-	.hfp		= 20,
-	.hbp		= 68,
-
-	.vsw		= 2,
-	.vfp		= 4,
-	.vbp		= 18,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-static inline struct panel_generic_dpi_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct panel_generic_dpi_data *) dssdev->data;
-}
-
-static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
-{
-	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
-	int r, i;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	for (i = 0; i < panel_data->num_gpios; ++i) {
-		gpio_set_value_cansleep(panel_data->gpios[i],
-				panel_data->gpio_invert[i] ? 0 : 1);
-	}
-
-	return 0;
-
-err0:
-	return r;
-}
-
-static void lb035q02_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
-	int i;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	for (i = panel_data->num_gpios - 1; i >= 0; --i) {
-		gpio_set_value_cansleep(panel_data->gpios[i],
-				panel_data->gpio_invert[i] ? 1 : 0);
-	}
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int lb035q02_panel_probe(struct omap_dss_device *dssdev)
-{
-	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
-	struct lb035q02_data *ld;
-	int r, i;
-
-	if (!panel_data)
-		return -EINVAL;
-
-	dssdev->panel.timings = lb035q02_timings;
-
-	ld = devm_kzalloc(dssdev->dev, sizeof(*ld), GFP_KERNEL);
-	if (!ld)
-		return -ENOMEM;
-
-	for (i = 0; i < panel_data->num_gpios; ++i) {
-		r = devm_gpio_request_one(dssdev->dev, panel_data->gpios[i],
-				panel_data->gpio_invert[i] ?
-				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-				"panel gpio");
-		if (r)
-			return r;
-	}
-
-	mutex_init(&ld->lock);
-	dev_set_drvdata(dssdev->dev, ld);
-
-	return 0;
-}
-
-static void lb035q02_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int lb035q02_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct lb035q02_data *ld = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&ld->lock);
-
-	r = lb035q02_panel_power_on(dssdev);
-	if (r)
-		goto err;
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&ld->lock);
-	return 0;
-err:
-	mutex_unlock(&ld->lock);
-	return r;
-}
-
-static void lb035q02_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct lb035q02_data *ld = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&ld->lock);
-
-	lb035q02_panel_power_off(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&ld->lock);
-}
-
-static struct omap_dss_driver lb035q02_driver = {
-	.probe		= lb035q02_panel_probe,
-	.remove		= lb035q02_panel_remove,
-
-	.enable		= lb035q02_panel_enable,
-	.disable	= lb035q02_panel_disable,
-
-	.driver         = {
-		.name   = "lgphilips_lb035q02_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
-{
-	struct spi_message msg;
-	struct spi_transfer index_xfer = {
-		.len		= 3,
-		.cs_change	= 1,
-	};
-	struct spi_transfer value_xfer = {
-		.len		= 3,
-	};
-	u8	buffer[16];
-
-	spi_message_init(&msg);
-
-	/* register index */
-	buffer[0] = 0x70;
-	buffer[1] = 0x00;
-	buffer[2] = reg & 0x7f;
-	index_xfer.tx_buf = buffer;
-	spi_message_add_tail(&index_xfer, &msg);
-
-	/* register value */
-	buffer[4] = 0x72;
-	buffer[5] = val >> 8;
-	buffer[6] = val;
-	value_xfer.tx_buf = buffer + 4;
-	spi_message_add_tail(&value_xfer, &msg);
-
-	return spi_sync(spi, &msg);
-}
-
-static void init_lb035q02_panel(struct spi_device *spi)
-{
-	/* Init sequence from page 28 of the lb035q02 spec */
-	lb035q02_write_reg(spi, 0x01, 0x6300);
-	lb035q02_write_reg(spi, 0x02, 0x0200);
-	lb035q02_write_reg(spi, 0x03, 0x0177);
-	lb035q02_write_reg(spi, 0x04, 0x04c7);
-	lb035q02_write_reg(spi, 0x05, 0xffc0);
-	lb035q02_write_reg(spi, 0x06, 0xe806);
-	lb035q02_write_reg(spi, 0x0a, 0x4008);
-	lb035q02_write_reg(spi, 0x0b, 0x0000);
-	lb035q02_write_reg(spi, 0x0d, 0x0030);
-	lb035q02_write_reg(spi, 0x0e, 0x2800);
-	lb035q02_write_reg(spi, 0x0f, 0x0000);
-	lb035q02_write_reg(spi, 0x16, 0x9f80);
-	lb035q02_write_reg(spi, 0x17, 0x0a0f);
-	lb035q02_write_reg(spi, 0x1e, 0x00c1);
-	lb035q02_write_reg(spi, 0x30, 0x0300);
-	lb035q02_write_reg(spi, 0x31, 0x0007);
-	lb035q02_write_reg(spi, 0x32, 0x0000);
-	lb035q02_write_reg(spi, 0x33, 0x0000);
-	lb035q02_write_reg(spi, 0x34, 0x0707);
-	lb035q02_write_reg(spi, 0x35, 0x0004);
-	lb035q02_write_reg(spi, 0x36, 0x0302);
-	lb035q02_write_reg(spi, 0x37, 0x0202);
-	lb035q02_write_reg(spi, 0x3a, 0x0a0d);
-	lb035q02_write_reg(spi, 0x3b, 0x0806);
-}
-
-static int lb035q02_panel_spi_probe(struct spi_device *spi)
-{
-	init_lb035q02_panel(spi);
-	return omap_dss_register_driver(&lb035q02_driver);
-}
-
-static int lb035q02_panel_spi_remove(struct spi_device *spi)
-{
-	omap_dss_unregister_driver(&lb035q02_driver);
-	return 0;
-}
-
-static struct spi_driver lb035q02_spi_driver = {
-	.driver		= {
-		.name	= "lgphilips_lb035q02_panel-spi",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= lb035q02_panel_spi_probe,
-	.remove		= lb035q02_panel_spi_remove,
-};
-
-module_spi_driver(lb035q02_spi_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
deleted file mode 100644
index 1d525fc84db9..000000000000
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/* #define DEBUG */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#define BLIZZARD_REV_CODE                      0x00
-#define BLIZZARD_CONFIG                        0x02
-#define BLIZZARD_PLL_DIV                       0x04
-#define BLIZZARD_PLL_LOCK_RANGE                0x06
-#define BLIZZARD_PLL_CLOCK_SYNTH_0             0x08
-#define BLIZZARD_PLL_CLOCK_SYNTH_1             0x0a
-#define BLIZZARD_PLL_MODE                      0x0c
-#define BLIZZARD_CLK_SRC                       0x0e
-#define BLIZZARD_MEM_BANK0_ACTIVATE            0x10
-#define BLIZZARD_MEM_BANK0_STATUS              0x14
-#define BLIZZARD_PANEL_CONFIGURATION           0x28
-#define BLIZZARD_HDISP                         0x2a
-#define BLIZZARD_HNDP                          0x2c
-#define BLIZZARD_VDISP0                        0x2e
-#define BLIZZARD_VDISP1                        0x30
-#define BLIZZARD_VNDP                          0x32
-#define BLIZZARD_HSW                           0x34
-#define BLIZZARD_VSW                           0x38
-#define BLIZZARD_DISPLAY_MODE                  0x68
-#define BLIZZARD_INPUT_WIN_X_START_0           0x6c
-#define BLIZZARD_DATA_SOURCE_SELECT            0x8e
-#define BLIZZARD_DISP_MEM_DATA_PORT            0x90
-#define BLIZZARD_DISP_MEM_READ_ADDR0           0x92
-#define BLIZZARD_POWER_SAVE                    0xE6
-#define BLIZZARD_NDISP_CTRL_STATUS             0xE8
-
-/* Data source select */
-/* For S1D13745 */
-#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND	0x00
-#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE	0x01
-#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE	0x04
-#define BLIZZARD_SRC_DISABLE_OVERLAY		0x05
-/* For S1D13744 */
-#define BLIZZARD_SRC_WRITE_LCD			0x00
-#define BLIZZARD_SRC_BLT_LCD			0x06
-
-#define BLIZZARD_COLOR_RGB565			0x01
-#define BLIZZARD_COLOR_YUV420			0x09
-
-#define BLIZZARD_VERSION_S1D13745		0x01	/* Hailstorm */
-#define BLIZZARD_VERSION_S1D13744		0x02	/* Blizzard */
-
-#define MIPID_CMD_READ_DISP_ID		0x04
-#define MIPID_CMD_READ_RED		0x06
-#define MIPID_CMD_READ_GREEN		0x07
-#define MIPID_CMD_READ_BLUE		0x08
-#define MIPID_CMD_READ_DISP_STATUS	0x09
-#define MIPID_CMD_RDDSDR		0x0F
-#define MIPID_CMD_SLEEP_IN		0x10
-#define MIPID_CMD_SLEEP_OUT		0x11
-#define MIPID_CMD_DISP_OFF		0x28
-#define MIPID_CMD_DISP_ON		0x29
-
-static struct panel_drv_data {
-	struct mutex lock;
-
-	struct omap_dss_device *dssdev;
-	struct spi_device *spidev;
-
-	int blizzard_ver;
-} s_drv_data;
-
-
-static inline
-struct panel_n8x0_data *get_board_data(const struct omap_dss_device *dssdev)
-{
-	return dssdev->data;
-}
-
-static inline
-struct panel_drv_data *get_drv_data(const struct omap_dss_device *dssdev)
-{
-	return &s_drv_data;
-}
-
-
-static inline void blizzard_cmd(u8 cmd)
-{
-	omap_rfbi_write_command(&cmd, 1);
-}
-
-static inline void blizzard_write(u8 cmd, const u8 *buf, int len)
-{
-	omap_rfbi_write_command(&cmd, 1);
-	omap_rfbi_write_data(buf, len);
-}
-
-static inline void blizzard_read(u8 cmd, u8 *buf, int len)
-{
-	omap_rfbi_write_command(&cmd, 1);
-	omap_rfbi_read_data(buf, len);
-}
-
-static u8 blizzard_read_reg(u8 cmd)
-{
-	u8 data;
-	blizzard_read(cmd, &data, 1);
-	return data;
-}
-
-static void blizzard_ctrl_setup_update(struct omap_dss_device *dssdev,
-		int x, int y, int w, int h)
-{
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	u8 tmp[18];
-	int x_end, y_end;
-
-	x_end = x + w - 1;
-	y_end = y + h - 1;
-
-	tmp[0] = x;
-	tmp[1] = x >> 8;
-	tmp[2] = y;
-	tmp[3] = y >> 8;
-	tmp[4] = x_end;
-	tmp[5] = x_end >> 8;
-	tmp[6] = y_end;
-	tmp[7] = y_end >> 8;
-
-	/* scaling? */
-	tmp[8] = x;
-	tmp[9] = x >> 8;
-	tmp[10] = y;
-	tmp[11] = y >> 8;
-	tmp[12] = x_end;
-	tmp[13] = x_end >> 8;
-	tmp[14] = y_end;
-	tmp[15] = y_end >> 8;
-
-	tmp[16] = BLIZZARD_COLOR_RGB565;
-
-	if (ddata->blizzard_ver == BLIZZARD_VERSION_S1D13745)
-		tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND;
-	else
-		tmp[17] = ddata->blizzard_ver == BLIZZARD_VERSION_S1D13744 ?
-			BLIZZARD_SRC_WRITE_LCD :
-			BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
-
-	omapdss_rfbi_set_pixel_size(dssdev, 16);
-	omapdss_rfbi_set_data_lines(dssdev, 8);
-
-	omap_rfbi_configure(dssdev);
-
-	blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18);
-
-	omapdss_rfbi_set_pixel_size(dssdev, 16);
-	omapdss_rfbi_set_data_lines(dssdev, 16);
-
-	omap_rfbi_configure(dssdev);
-}
-
-static void mipid_transfer(struct spi_device *spi, int cmd, const u8 *wbuf,
-		int wlen, u8 *rbuf, int rlen)
-{
-	struct spi_message	m;
-	struct spi_transfer	*x, xfer[4];
-	u16			w;
-	int			r;
-
-	spi_message_init(&m);
-
-	memset(xfer, 0, sizeof(xfer));
-	x = &xfer[0];
-
-	cmd &=  0xff;
-	x->tx_buf		= &cmd;
-	x->bits_per_word	= 9;
-	x->len			= 2;
-	spi_message_add_tail(x, &m);
-
-	if (wlen) {
-		x++;
-		x->tx_buf		= wbuf;
-		x->len			= wlen;
-		x->bits_per_word	= 9;
-		spi_message_add_tail(x, &m);
-	}
-
-	if (rlen) {
-		x++;
-		x->rx_buf	= &w;
-		x->len		= 1;
-		spi_message_add_tail(x, &m);
-
-		if (rlen > 1) {
-			/* Arrange for the extra clock before the first
-			 * data bit.
-			 */
-			x->bits_per_word = 9;
-			x->len		 = 2;
-
-			x++;
-			x->rx_buf	 = &rbuf[1];
-			x->len		 = rlen - 1;
-			spi_message_add_tail(x, &m);
-		}
-	}
-
-	r = spi_sync(spi, &m);
-	if (r < 0)
-		dev_dbg(&spi->dev, "spi_sync %d\n", r);
-
-	if (rlen)
-		rbuf[0] = w & 0xff;
-}
-
-static inline void mipid_cmd(struct spi_device *spi, int cmd)
-{
-	mipid_transfer(spi, cmd, NULL, 0, NULL, 0);
-}
-
-static inline void mipid_write(struct spi_device *spi,
-		int reg, const u8 *buf, int len)
-{
-	mipid_transfer(spi, reg, buf, len, NULL, 0);
-}
-
-static inline void mipid_read(struct spi_device *spi,
-		int reg, u8 *buf, int len)
-{
-	mipid_transfer(spi, reg, NULL, 0, buf, len);
-}
-
-static void set_data_lines(struct spi_device *spi, int data_lines)
-{
-	u16 par;
-
-	switch (data_lines) {
-	case 16:
-		par = 0x150;
-		break;
-	case 18:
-		par = 0x160;
-		break;
-	case 24:
-		par = 0x170;
-		break;
-	}
-
-	mipid_write(spi, 0x3a, (u8 *)&par, 2);
-}
-
-static void send_init_string(struct spi_device *spi)
-{
-	u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
-	mipid_write(spi, 0xc2, (u8 *)initpar, sizeof(initpar));
-}
-
-static void send_display_on(struct spi_device *spi)
-{
-	mipid_cmd(spi, MIPID_CMD_DISP_ON);
-}
-
-static void send_display_off(struct spi_device *spi)
-{
-	mipid_cmd(spi, MIPID_CMD_DISP_OFF);
-}
-
-static void send_sleep_out(struct spi_device *spi)
-{
-	mipid_cmd(spi, MIPID_CMD_SLEEP_OUT);
-	msleep(120);
-}
-
-static void send_sleep_in(struct spi_device *spi)
-{
-	mipid_cmd(spi, MIPID_CMD_SLEEP_IN);
-	msleep(50);
-}
-
-static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
-{
-	int r;
-	struct panel_n8x0_data *bdata = get_board_data(dssdev);
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	struct spi_device *spi = ddata->spidev;
-	u8 rev, conf;
-	u8 display_id[3];
-	const char *panel_name;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	gpio_direction_output(bdata->ctrl_pwrdown, 1);
-
-	omapdss_rfbi_set_size(dssdev, dssdev->panel.timings.x_res,
-		dssdev->panel.timings.y_res);
-	omapdss_rfbi_set_pixel_size(dssdev, dssdev->ctrl.pixel_size);
-	omapdss_rfbi_set_data_lines(dssdev, dssdev->phy.rfbi.data_lines);
-	omapdss_rfbi_set_interface_timings(dssdev, &dssdev->ctrl.rfbi_timings);
-
-	r = omapdss_rfbi_display_enable(dssdev);
-	if (r)
-		goto err_rfbi_en;
-
-	rev = blizzard_read_reg(BLIZZARD_REV_CODE);
-	conf = blizzard_read_reg(BLIZZARD_CONFIG);
-
-	switch (rev & 0xfc) {
-	case 0x9c:
-		ddata->blizzard_ver = BLIZZARD_VERSION_S1D13744;
-		dev_info(dssdev->dev, "s1d13744 LCD controller rev %d "
-			"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
-		break;
-	case 0xa4:
-		ddata->blizzard_ver = BLIZZARD_VERSION_S1D13745;
-		dev_info(dssdev->dev, "s1d13745 LCD controller rev %d "
-			"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
-		break;
-	default:
-		dev_err(dssdev->dev, "invalid s1d1374x revision %02x\n", rev);
-		r = -ENODEV;
-		goto err_inv_chip;
-	}
-
-	/* panel */
-
-	gpio_direction_output(bdata->panel_reset, 1);
-
-	mipid_read(spi, MIPID_CMD_READ_DISP_ID, display_id, 3);
-	dev_dbg(&spi->dev, "MIPI display ID: %02x%02x%02x\n",
-			display_id[0], display_id[1], display_id[2]);
-
-	switch (display_id[0]) {
-	case 0x45:
-		panel_name = "lph8923";
-		break;
-	case 0x83:
-		panel_name = "ls041y3";
-		break;
-	default:
-		dev_err(dssdev->dev, "invalid display ID 0x%x\n",
-				display_id[0]);
-		r = -ENODEV;
-		goto err_inv_panel;
-	}
-
-	dev_info(dssdev->dev, "%s rev %02x LCD detected\n",
-			panel_name, display_id[1]);
-
-	send_sleep_out(spi);
-	send_init_string(spi);
-	set_data_lines(spi, 24);
-	send_display_on(spi);
-
-	return 0;
-
-err_inv_panel:
-	/*
-	 * HACK: we should turn off the panel here, but there is some problem
-	 * with the initialization sequence, and we fail to init the panel if we
-	 * have turned it off
-	 */
-	/* gpio_direction_output(bdata->panel_reset, 0); */
-err_inv_chip:
-	omapdss_rfbi_display_disable(dssdev);
-err_rfbi_en:
-	gpio_direction_output(bdata->ctrl_pwrdown, 0);
-	return r;
-}
-
-static void n8x0_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_n8x0_data *bdata = get_board_data(dssdev);
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	struct spi_device *spi = ddata->spidev;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	send_display_off(spi);
-	send_sleep_in(spi);
-
-	/*
-	 * HACK: we should turn off the panel here, but there is some problem
-	 * with the initialization sequence, and we fail to init the panel if we
-	 * have turned it off
-	 */
-	/* gpio_direction_output(bdata->panel_reset, 0); */
-	gpio_direction_output(bdata->ctrl_pwrdown, 0);
-	omapdss_rfbi_display_disable(dssdev);
-}
-
-static const struct rfbi_timings n8x0_panel_timings = {
-	.cs_on_time     = 0,
-
-	.we_on_time     = 9000,
-	.we_off_time    = 18000,
-	.we_cycle_time  = 36000,
-
-	.re_on_time     = 9000,
-	.re_off_time    = 27000,
-	.re_cycle_time  = 36000,
-
-	.access_time    = 27000,
-	.cs_off_time    = 36000,
-
-	.cs_pulse_width = 0,
-};
-
-static int n8x0_panel_probe(struct omap_dss_device *dssdev)
-{
-	struct panel_n8x0_data *bdata = get_board_data(dssdev);
-	struct panel_drv_data *ddata;
-	int r;
-
-	dev_dbg(dssdev->dev, "probe\n");
-
-	if (!bdata)
-		return -EINVAL;
-
-	s_drv_data.dssdev = dssdev;
-
-	ddata = &s_drv_data;
-
-	mutex_init(&ddata->lock);
-
-	dssdev->panel.timings.x_res = 800;
-	dssdev->panel.timings.y_res = 480;
-	dssdev->ctrl.pixel_size = 16;
-	dssdev->ctrl.rfbi_timings = n8x0_panel_timings;
-	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
-
-	if (gpio_is_valid(bdata->panel_reset)) {
-		r = devm_gpio_request_one(dssdev->dev, bdata->panel_reset,
-				GPIOF_OUT_INIT_LOW, "PANEL RESET");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(bdata->ctrl_pwrdown)) {
-		r = devm_gpio_request_one(dssdev->dev, bdata->ctrl_pwrdown,
-				GPIOF_OUT_INIT_LOW, "PANEL PWRDOWN");
-		if (r)
-			return r;
-	}
-
-	return 0;
-}
-
-static void n8x0_panel_remove(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "remove\n");
-
-	dev_set_drvdata(dssdev->dev, NULL);
-}
-
-static int n8x0_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	int r;
-
-	dev_dbg(dssdev->dev, "enable\n");
-
-	mutex_lock(&ddata->lock);
-
-	rfbi_bus_lock();
-
-	r = n8x0_panel_power_on(dssdev);
-
-	rfbi_bus_unlock();
-
-	if (r) {
-		mutex_unlock(&ddata->lock);
-		return r;
-	}
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&ddata->lock);
-
-	return 0;
-}
-
-static void n8x0_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-
-	dev_dbg(dssdev->dev, "disable\n");
-
-	mutex_lock(&ddata->lock);
-
-	rfbi_bus_lock();
-
-	n8x0_panel_power_off(dssdev);
-
-	rfbi_bus_unlock();
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&ddata->lock);
-}
-
-static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev,
-		u16 *xres, u16 *yres)
-{
-	*xres = dssdev->panel.timings.x_res;
-	*yres = dssdev->panel.timings.y_res;
-}
-
-static void update_done(void *data)
-{
-	rfbi_bus_unlock();
-}
-
-static int n8x0_panel_update(struct omap_dss_device *dssdev,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	u16 dw, dh;
-
-	dev_dbg(dssdev->dev, "update\n");
-
-	dw = dssdev->panel.timings.x_res;
-	dh = dssdev->panel.timings.y_res;
-
-	if (x != 0 || y != 0 || w != dw || h != dh) {
-		dev_err(dssdev->dev, "invalid update region %d, %d, %d, %d\n",
-			x, y, w, h);
-		return -EINVAL;
-	}
-
-	mutex_lock(&ddata->lock);
-	rfbi_bus_lock();
-
-	blizzard_ctrl_setup_update(dssdev, x, y, w, h);
-
-	omap_rfbi_update(dssdev, update_done, NULL);
-
-	mutex_unlock(&ddata->lock);
-
-	return 0;
-}
-
-static int n8x0_panel_sync(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-
-	dev_dbg(dssdev->dev, "sync\n");
-
-	mutex_lock(&ddata->lock);
-	rfbi_bus_lock();
-	rfbi_bus_unlock();
-	mutex_unlock(&ddata->lock);
-
-	return 0;
-}
-
-static struct omap_dss_driver n8x0_panel_driver = {
-	.probe		= n8x0_panel_probe,
-	.remove		= n8x0_panel_remove,
-
-	.enable		= n8x0_panel_enable,
-	.disable	= n8x0_panel_disable,
-
-	.update		= n8x0_panel_update,
-	.sync		= n8x0_panel_sync,
-
-	.get_resolution	= n8x0_panel_get_resolution,
-	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
-
-	.driver         = {
-		.name   = "n8x0_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-/* PANEL */
-
-static int mipid_spi_probe(struct spi_device *spi)
-{
-	int r;
-
-	dev_dbg(&spi->dev, "mipid_spi_probe\n");
-
-	spi->mode = SPI_MODE_0;
-
-	s_drv_data.spidev = spi;
-
-	r = omap_dss_register_driver(&n8x0_panel_driver);
-	if (r)
-		pr_err("n8x0_panel: dss driver registration failed\n");
-
-	return r;
-}
-
-static int mipid_spi_remove(struct spi_device *spi)
-{
-	dev_dbg(&spi->dev, "mipid_spi_remove\n");
-	omap_dss_unregister_driver(&n8x0_panel_driver);
-	return 0;
-}
-
-static struct spi_driver mipid_spi_driver = {
-	.driver = {
-		.name	= "lcd_mipid",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= mipid_spi_probe,
-	.remove	= mipid_spi_remove,
-};
-module_spi_driver(mipid_spi_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
deleted file mode 100644
index 6b9f7925e918..000000000000
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Support for NEC-nl8048hl11-01b panel driver
- *
- * Copyright (C) 2010 Texas Instruments Inc.
- * Author: Erik Gilling <konkers@android.com>
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#define LCD_XRES		800
-#define LCD_YRES		480
-/*
- * NEC PIX Clock Ratings
- * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
- */
-#define LCD_PIXEL_CLOCK		23800
-
-static const struct {
-	unsigned char addr;
-	unsigned char dat;
-} nec_8048_init_seq[] = {
-	{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
-	{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
-	{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 },	{ 24, 0x25 },
-	{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
-	{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F },	{ 38, 0x0F },
-	{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 },	{ 43, 0x0F },
-	{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F },	{ 48, 0x0F },
-	{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
-	{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },	{ 86, 0x14 },
-	{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 },	{ 93, 0x0C },
-	{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
-	{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
-	{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
-	{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
-	{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
-	{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
-	{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
-	{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
-};
-
-/*
- * NEC NL8048HL11-01B  Manual
- * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below
- */
-
-static struct omap_video_timings nec_8048_panel_timings = {
-	/* 800 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
-	.x_res		= LCD_XRES,
-	.y_res		= LCD_YRES,
-	.pixel_clock	= LCD_PIXEL_CLOCK,
-	.hfp		= 6,
-	.hsw		= 1,
-	.hbp		= 4,
-	.vfp		= 3,
-	.vsw		= 1,
-	.vbp		= 4,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-};
-
-static inline struct panel_nec_nl8048_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct panel_nec_nl8048_data *) dssdev->data;
-}
-
-static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
-{
-	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
-	int r;
-
-	if (!pd)
-		return -EINVAL;
-
-	dssdev->panel.timings = nec_8048_panel_timings;
-
-	if (gpio_is_valid(pd->qvga_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->qvga_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(pd->res_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->res_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RES");
-		if (r)
-			return r;
-	}
-
-	return 0;
-}
-
-static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
-{
-	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	if (gpio_is_valid(pd->res_gpio))
-		gpio_set_value_cansleep(pd->res_gpio, 1);
-
-	return 0;
-
-err0:
-	return r;
-}
-
-static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (gpio_is_valid(pd->res_gpio))
-		gpio_set_value_cansleep(pd->res_gpio, 0);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int nec_8048_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	r = nec_8048_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void nec_8048_panel_disable(struct omap_dss_device *dssdev)
-{
-	nec_8048_panel_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev)
-{
-	return 16;
-}
-
-static struct omap_dss_driver nec_8048_driver = {
-	.probe			= nec_8048_panel_probe,
-	.remove			= nec_8048_panel_remove,
-	.enable			= nec_8048_panel_enable,
-	.disable		= nec_8048_panel_disable,
-	.get_recommended_bpp	= nec_8048_recommended_bpp,
-
-	.driver		= {
-		.name		= "NEC_8048_panel",
-		.owner		= THIS_MODULE,
-	},
-};
-
-static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
-			unsigned char reg_data)
-{
-	int ret = 0;
-	unsigned int cmd = 0, data = 0;
-
-	cmd = 0x0000 | reg_addr; /* register address write */
-	data = 0x0100 | reg_data ; /* register data write */
-	data = (cmd << 16) | data;
-
-	ret = spi_write(spi, (unsigned char *)&data, 4);
-	if (ret)
-		pr_err("error in spi_write %x\n", data);
-
-	return ret;
-}
-
-static int init_nec_8048_wvga_lcd(struct spi_device *spi)
-{
-	unsigned int i;
-	/* Initialization Sequence */
-	/* nec_8048_spi_send(spi, REG, VAL) */
-	for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
-		nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
-				nec_8048_init_seq[i].dat);
-	udelay(20);
-	nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
-				nec_8048_init_seq[i].dat);
-	return 0;
-}
-
-static int nec_8048_spi_probe(struct spi_device *spi)
-{
-	spi->mode = SPI_MODE_0;
-	spi->bits_per_word = 32;
-	spi_setup(spi);
-
-	init_nec_8048_wvga_lcd(spi);
-
-	return omap_dss_register_driver(&nec_8048_driver);
-}
-
-static int nec_8048_spi_remove(struct spi_device *spi)
-{
-	omap_dss_unregister_driver(&nec_8048_driver);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-
-static int nec_8048_spi_suspend(struct device *dev)
-{
-	struct spi_device *spi = to_spi_device(dev);
-
-	nec_8048_spi_send(spi, 2, 0x01);
-	mdelay(40);
-
-	return 0;
-}
-
-static int nec_8048_spi_resume(struct device *dev)
-{
-	struct spi_device *spi = to_spi_device(dev);
-
-	/* reinitialize the panel */
-	spi_setup(spi);
-	nec_8048_spi_send(spi, 2, 0x00);
-	init_nec_8048_wvga_lcd(spi);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(nec_8048_spi_pm_ops, nec_8048_spi_suspend,
-		nec_8048_spi_resume);
-#define NEC_8048_SPI_PM_OPS (&nec_8048_spi_pm_ops)
-#else
-#define NEC_8048_SPI_PM_OPS NULL
-#endif
-
-static struct spi_driver nec_8048_spi_driver = {
-	.probe		= nec_8048_spi_probe,
-	.remove		= nec_8048_spi_remove,
-	.driver		= {
-		.name	= "nec_8048_spi",
-		.owner	= THIS_MODULE,
-		.pm	= NEC_8048_SPI_PM_OPS,
-	},
-};
-
-module_spi_driver(nec_8048_spi_driver);
-
-MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
-MODULE_DESCRIPTION("NEC-nl8048hl11-01b Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
deleted file mode 100644
index 153e9bea0f6e..000000000000
--- a/drivers/video/omap2/displays/panel-picodlp.c
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
- * picodlp panel driver
- * picodlp_i2c_driver: i2c_client driver
- *
- * Copyright (C) 2009-2011 Texas Instruments
- * Author: Mythri P K <mythripk@ti.com>
- * Mayuresh Janorkar <mayur@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "panel-picodlp.h"
-
-struct picodlp_data {
-	struct mutex lock;
-	struct i2c_client *picodlp_i2c_client;
-};
-
-static struct i2c_board_info picodlp_i2c_board_info = {
-	I2C_BOARD_INFO("picodlp_i2c_driver", 0x1b),
-};
-
-struct picodlp_i2c_data {
-	struct mutex xfer_lock;
-};
-
-static struct i2c_device_id picodlp_i2c_id[] = {
-	{ "picodlp_i2c_driver", 0 },
-	{ }
-};
-
-struct picodlp_i2c_command {
-	u8 reg;
-	u32 value;
-};
-
-static struct omap_video_timings pico_ls_timings = {
-	.x_res		= 864,
-	.y_res		= 480,
-	.hsw		= 7,
-	.hfp		= 11,
-	.hbp		= 7,
-
-	.pixel_clock	= 19200,
-
-	.vsw		= 2,
-	.vfp		= 3,
-	.vbp		= 14,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-};
-
-static inline struct picodlp_panel_data
-		*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct picodlp_panel_data *) dssdev->data;
-}
-
-static u32 picodlp_i2c_read(struct i2c_client *client, u8 reg)
-{
-	u8 read_cmd[] = {READ_REG_SELECT, reg}, data[4];
-	struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
-	struct i2c_msg msg[2];
-
-	mutex_lock(&picodlp_i2c_data->xfer_lock);
-
-	msg[0].addr = client->addr;
-	msg[0].flags = 0;
-	msg[0].len = 2;
-	msg[0].buf = read_cmd;
-
-	msg[1].addr = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].len = 4;
-	msg[1].buf = data;
-
-	i2c_transfer(client->adapter, msg, 2);
-	mutex_unlock(&picodlp_i2c_data->xfer_lock);
-	return (data[3] | (data[2] << 8) | (data[1] << 16) | (data[0] << 24));
-}
-
-static int picodlp_i2c_write_block(struct i2c_client *client,
-					u8 *data, int len)
-{
-	struct i2c_msg msg;
-	int i, r, msg_count = 1;
-
-	struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
-
-	if (len < 1 || len > 32) {
-		dev_err(&client->dev,
-			"too long syn_write_block len %d\n", len);
-		return -EIO;
-	}
-	mutex_lock(&picodlp_i2c_data->xfer_lock);
-
-	msg.addr = client->addr;
-	msg.flags = 0;
-	msg.len = len;
-	msg.buf = data;
-	r = i2c_transfer(client->adapter, &msg, msg_count);
-	mutex_unlock(&picodlp_i2c_data->xfer_lock);
-
-	/*
-	 * i2c_transfer returns:
-	 * number of messages sent in case of success
-	 * a negative error number in case of failure
-	 */
-	if (r != msg_count)
-		goto err;
-
-	/* In case of success */
-	for (i = 0; i < len; i++)
-		dev_dbg(&client->dev,
-			"addr %x bw 0x%02x[%d]: 0x%02x\n",
-			client->addr, data[0] + i, i, data[i]);
-
-	return 0;
-err:
-	dev_err(&client->dev, "picodlp_i2c_write error\n");
-	return r;
-}
-
-static int picodlp_i2c_write(struct i2c_client *client, u8 reg, u32 value)
-{
-	u8 data[5];
-	int i;
-
-	data[0] = reg;
-	for (i = 1; i < 5; i++)
-		data[i] = (value >> (32 - (i) * 8)) & 0xFF;
-
-	return picodlp_i2c_write_block(client, data, 5);
-}
-
-static int picodlp_i2c_write_array(struct i2c_client *client,
-			const struct picodlp_i2c_command commands[],
-			int count)
-{
-	int i, r = 0;
-	for (i = 0; i < count; i++) {
-		r = picodlp_i2c_write(client, commands[i].reg,
-						commands[i].value);
-		if (r)
-			return r;
-	}
-	return r;
-}
-
-static int picodlp_wait_for_dma_done(struct i2c_client *client)
-{
-	u8 trial = 100;
-
-	do {
-		msleep(1);
-		if (!trial--)
-			return -ETIMEDOUT;
-	} while (picodlp_i2c_read(client, MAIN_STATUS) & DMA_STATUS);
-
-	return 0;
-}
-
-/**
- * picodlp_i2c_init:	i2c_initialization routine
- * client:	i2c_client for communication
- *
- * return
- *		0	: Success, no error
- *	error code	: Failure
- */
-static int picodlp_i2c_init(struct i2c_client *client)
-{
-	int r;
-	static const struct picodlp_i2c_command init_cmd_set1[] = {
-		{SOFT_RESET, 1},
-		{DMD_PARK_TRIGGER, 1},
-		{MISC_REG, 5},
-		{SEQ_CONTROL, 0},
-		{SEQ_VECTOR, 0x100},
-		{DMD_BLOCK_COUNT, 7},
-		{DMD_VCC_CONTROL, 0x109},
-		{DMD_PARK_PULSE_COUNT, 0xA},
-		{DMD_PARK_PULSE_WIDTH, 0xB},
-		{DMD_PARK_DELAY, 0x2ED},
-		{DMD_SHADOW_ENABLE, 0},
-		{FLASH_OPCODE, 0xB},
-		{FLASH_DUMMY_BYTES, 1},
-		{FLASH_ADDR_BYTES, 3},
-		{PBC_CONTROL, 0},
-		{FLASH_START_ADDR, CMT_LUT_0_START_ADDR},
-		{FLASH_READ_BYTES, CMT_LUT_0_SIZE},
-		{CMT_SPLASH_LUT_START_ADDR, 0},
-		{CMT_SPLASH_LUT_DEST_SELECT, CMT_LUT_ALL},
-		{PBC_CONTROL, 1},
-	};
-
-	static const struct picodlp_i2c_command init_cmd_set2[] = {
-		{PBC_CONTROL, 0},
-		{CMT_SPLASH_LUT_DEST_SELECT, 0},
-		{PBC_CONTROL, 0},
-		{FLASH_START_ADDR, SEQUENCE_0_START_ADDR},
-		{FLASH_READ_BYTES, SEQUENCE_0_SIZE},
-		{SEQ_RESET_LUT_START_ADDR, 0},
-		{SEQ_RESET_LUT_DEST_SELECT, SEQ_SEQ_LUT},
-		{PBC_CONTROL, 1},
-	};
-
-	static const struct picodlp_i2c_command init_cmd_set3[] = {
-		{PBC_CONTROL, 0},
-		{SEQ_RESET_LUT_DEST_SELECT, 0},
-		{PBC_CONTROL, 0},
-		{FLASH_START_ADDR, DRC_TABLE_0_START_ADDR},
-		{FLASH_READ_BYTES, DRC_TABLE_0_SIZE},
-		{SEQ_RESET_LUT_START_ADDR, 0},
-		{SEQ_RESET_LUT_DEST_SELECT, SEQ_DRC_LUT_ALL},
-		{PBC_CONTROL, 1},
-	};
-
-	static const struct picodlp_i2c_command init_cmd_set4[] = {
-		{PBC_CONTROL, 0},
-		{SEQ_RESET_LUT_DEST_SELECT, 0},
-		{SDC_ENABLE, 1},
-		{AGC_CTRL, 7},
-		{CCA_C1A, 0x100},
-		{CCA_C1B, 0x0},
-		{CCA_C1C, 0x0},
-		{CCA_C2A, 0x0},
-		{CCA_C2B, 0x100},
-		{CCA_C2C, 0x0},
-		{CCA_C3A, 0x0},
-		{CCA_C3B, 0x0},
-		{CCA_C3C, 0x100},
-		{CCA_C7A, 0x100},
-		{CCA_C7B, 0x100},
-		{CCA_C7C, 0x100},
-		{CCA_ENABLE, 1},
-		{CPU_IF_MODE, 1},
-		{SHORT_FLIP, 1},
-		{CURTAIN_CONTROL, 0},
-		{DMD_PARK_TRIGGER, 0},
-		{R_DRIVE_CURRENT, 0x298},
-		{G_DRIVE_CURRENT, 0x298},
-		{B_DRIVE_CURRENT, 0x298},
-		{RGB_DRIVER_ENABLE, 7},
-		{SEQ_CONTROL, 0},
-		{ACTGEN_CONTROL, 0x10},
-		{SEQUENCE_MODE, SEQ_LOCK},
-		{DATA_FORMAT, RGB888},
-		{INPUT_RESOLUTION, WVGA_864_LANDSCAPE},
-		{INPUT_SOURCE, PARALLEL_RGB},
-		{CPU_IF_SYNC_METHOD, 1},
-		{SEQ_CONTROL, 1}
-	};
-
-	r = picodlp_i2c_write_array(client, init_cmd_set1,
-						ARRAY_SIZE(init_cmd_set1));
-	if (r)
-		return r;
-
-	r = picodlp_wait_for_dma_done(client);
-	if (r)
-		return r;
-
-	r = picodlp_i2c_write_array(client, init_cmd_set2,
-					ARRAY_SIZE(init_cmd_set2));
-	if (r)
-		return r;
-
-	r = picodlp_wait_for_dma_done(client);
-	if (r)
-		return r;
-
-	r = picodlp_i2c_write_array(client, init_cmd_set3,
-					ARRAY_SIZE(init_cmd_set3));
-	if (r)
-		return r;
-
-	r = picodlp_wait_for_dma_done(client);
-	if (r)
-		return r;
-
-	r = picodlp_i2c_write_array(client, init_cmd_set4,
-					ARRAY_SIZE(init_cmd_set4));
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static int picodlp_i2c_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
-{
-	struct picodlp_i2c_data *picodlp_i2c_data;
-
-	picodlp_i2c_data = kzalloc(sizeof(struct picodlp_i2c_data), GFP_KERNEL);
-
-	if (!picodlp_i2c_data)
-		return -ENOMEM;
-
-	mutex_init(&picodlp_i2c_data->xfer_lock);
-	i2c_set_clientdata(client, picodlp_i2c_data);
-
-	return 0;
-}
-
-static int picodlp_i2c_remove(struct i2c_client *client)
-{
-	struct picodlp_i2c_data *picodlp_i2c_data =
-					i2c_get_clientdata(client);
-	kfree(picodlp_i2c_data);
-	return 0;
-}
-
-static struct i2c_driver picodlp_i2c_driver = {
-	.driver = {
-		.name	= "picodlp_i2c_driver",
-	},
-	.probe		= picodlp_i2c_probe,
-	.remove		= picodlp_i2c_remove,
-	.id_table	= picodlp_i2c_id,
-};
-
-static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
-{
-	int r, trial = 100;
-	struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
-	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
-
-	gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
-	msleep(1);
-	gpio_set_value(picodlp_pdata->pwrgood_gpio, 1);
-
-	while (!gpio_get_value(picodlp_pdata->emu_done_gpio)) {
-		if (!trial--) {
-			dev_err(dssdev->dev, "emu_done signal not"
-						" going high\n");
-			return -ETIMEDOUT;
-		}
-		msleep(5);
-	}
-	/*
-	 * As per dpp2600 programming guide,
-	 * it is required to sleep for 1000ms after emu_done signal goes high
-	 * then only i2c commands can be successfully sent to dpp2600
-	 */
-	msleep(1000);
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r) {
-		dev_err(dssdev->dev, "failed to enable DPI\n");
-		goto err1;
-	}
-
-	r = picodlp_i2c_init(picod->picodlp_i2c_client);
-	if (r)
-		goto err;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return r;
-err:
-	omapdss_dpi_display_disable(dssdev);
-err1:
-	return r;
-}
-
-static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
-
-	omapdss_dpi_display_disable(dssdev);
-
-	gpio_set_value(picodlp_pdata->emu_done_gpio, 0);
-	gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
-}
-
-static int picodlp_panel_probe(struct omap_dss_device *dssdev)
-{
-	struct picodlp_data *picod;
-	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
-	struct i2c_adapter *adapter;
-	struct i2c_client *picodlp_i2c_client;
-	int r, picodlp_adapter_id;
-
-	dssdev->panel.timings = pico_ls_timings;
-
-	if (!picodlp_pdata)
-		return -EINVAL;
-
-	picod = devm_kzalloc(dssdev->dev, sizeof(*picod), GFP_KERNEL);
-	if (!picod)
-		return -ENOMEM;
-
-	mutex_init(&picod->lock);
-
-	picodlp_adapter_id = picodlp_pdata->picodlp_adapter_id;
-
-	adapter = i2c_get_adapter(picodlp_adapter_id);
-	if (!adapter) {
-		dev_err(dssdev->dev, "can't get i2c adapter\n");
-		return -ENODEV;
-	}
-
-	picodlp_i2c_client = i2c_new_device(adapter, &picodlp_i2c_board_info);
-	if (!picodlp_i2c_client) {
-		dev_err(dssdev->dev, "can't add i2c device::"
-					 " picodlp_i2c_client is NULL\n");
-		return -ENODEV;
-	}
-
-	picod->picodlp_i2c_client = picodlp_i2c_client;
-
-	dev_set_drvdata(dssdev->dev, picod);
-
-	if (gpio_is_valid(picodlp_pdata->emu_done_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev,
-				picodlp_pdata->emu_done_gpio,
-				GPIOF_IN, "DLP EMU DONE");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(picodlp_pdata->pwrgood_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev,
-				picodlp_pdata->pwrgood_gpio,
-				GPIOF_OUT_INIT_LOW, "DLP PWRGOOD");
-		if (r)
-			return r;
-	}
-
-	return 0;
-}
-
-static void picodlp_panel_remove(struct omap_dss_device *dssdev)
-{
-	struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
-
-	i2c_unregister_device(picod->picodlp_i2c_client);
-	dev_set_drvdata(dssdev->dev, NULL);
-	dev_dbg(dssdev->dev, "removing picodlp panel\n");
-}
-
-static int picodlp_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	dev_dbg(dssdev->dev, "enabling picodlp panel\n");
-
-	mutex_lock(&picod->lock);
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		mutex_unlock(&picod->lock);
-		return -EINVAL;
-	}
-
-	r = picodlp_panel_power_on(dssdev);
-	mutex_unlock(&picod->lock);
-
-	return r;
-}
-
-static void picodlp_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&picod->lock);
-	/* Turn off DLP Power */
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		picodlp_panel_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-	mutex_unlock(&picod->lock);
-
-	dev_dbg(dssdev->dev, "disabling picodlp panel\n");
-}
-
-static void picodlp_get_resolution(struct omap_dss_device *dssdev,
-					u16 *xres, u16 *yres)
-{
-	*xres = dssdev->panel.timings.x_res;
-	*yres = dssdev->panel.timings.y_res;
-}
-
-static struct omap_dss_driver picodlp_driver = {
-	.probe		= picodlp_panel_probe,
-	.remove		= picodlp_panel_remove,
-
-	.enable		= picodlp_panel_enable,
-	.disable	= picodlp_panel_disable,
-
-	.get_resolution	= picodlp_get_resolution,
-
-	.driver		= {
-		.name	= "picodlp_panel",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init picodlp_init(void)
-{
-	int r = 0;
-
-	r = i2c_add_driver(&picodlp_i2c_driver);
-	if (r) {
-		printk(KERN_WARNING "picodlp_i2c_driver" \
-			" registration failed\n");
-		return r;
-	}
-
-	r = omap_dss_register_driver(&picodlp_driver);
-	if (r)
-		i2c_del_driver(&picodlp_i2c_driver);
-
-	return r;
-}
-
-static void __exit picodlp_exit(void)
-{
-	i2c_del_driver(&picodlp_i2c_driver);
-	omap_dss_unregister_driver(&picodlp_driver);
-}
-
-module_init(picodlp_init);
-module_exit(picodlp_exit);
-
-MODULE_AUTHOR("Mythri P K <mythripk@ti.com>");
-MODULE_DESCRIPTION("picodlp driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-picodlp.h b/drivers/video/omap2/displays/panel-picodlp.h
deleted file mode 100644
index a34b431a7267..000000000000
--- a/drivers/video/omap2/displays/panel-picodlp.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Header file required by picodlp panel driver
- *
- * Copyright (C) 2009-2011 Texas Instruments
- * Author: Mythri P K <mythripk@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
-#define __OMAP2_DISPLAY_PANEL_PICODLP_H
-
-/* Commands used for configuring picodlp panel */
-
-#define MAIN_STATUS			0x03
-#define PBC_CONTROL			0x08
-#define INPUT_SOURCE			0x0B
-#define INPUT_RESOLUTION		0x0C
-#define DATA_FORMAT			0x0D
-#define IMG_ROTATION			0x0E
-#define LONG_FLIP			0x0F
-#define SHORT_FLIP			0x10
-#define TEST_PAT_SELECT			0x11
-#define R_DRIVE_CURRENT			0x12
-#define G_DRIVE_CURRENT			0x13
-#define B_DRIVE_CURRENT			0x14
-#define READ_REG_SELECT			0x15
-#define RGB_DRIVER_ENABLE		0x16
-
-#define CPU_IF_MODE			0x18
-#define FRAME_RATE			0x19
-#define CPU_IF_SYNC_METHOD		0x1A
-#define CPU_IF_SOF			0x1B
-#define CPU_IF_EOF			0x1C
-#define CPU_IF_SLEEP			0x1D
-
-#define SEQUENCE_MODE			0x1E
-#define SOFT_RESET			0x1F
-#define FRONT_END_RESET			0x21
-#define AUTO_PWR_ENABLE			0x22
-
-#define VSYNC_LINE_DELAY		0x23
-#define CPU_PI_HORIZ_START		0x24
-#define CPU_PI_VERT_START		0x25
-#define CPU_PI_HORIZ_WIDTH		0x26
-#define CPU_PI_VERT_HEIGHT		0x27
-
-#define PIXEL_MASK_CROP			0x28
-#define CROP_FIRST_LINE			0x29
-#define CROP_LAST_LINE			0x2A
-#define CROP_FIRST_PIXEL		0x2B
-#define CROP_LAST_PIXEL			0x2C
-#define DMD_PARK_TRIGGER		0x2D
-
-#define MISC_REG			0x30
-
-/* AGC registers */
-#define AGC_CTRL			0x50
-#define AGC_CLIPPED_PIXS		0x55
-#define AGC_BRIGHT_PIXS			0x56
-#define AGC_BG_PIXS			0x57
-#define AGC_SAFETY_MARGIN		0x17
-
-/* Color Coordinate Adjustment registers */
-#define CCA_ENABLE		0x5E
-#define CCA_C1A			0x5F
-#define CCA_C1B			0x60
-#define CCA_C1C			0x61
-#define CCA_C2A			0x62
-#define CCA_C2B			0x63
-#define CCA_C2C			0x64
-#define CCA_C3A			0x65
-#define CCA_C3B			0x66
-#define CCA_C3C			0x67
-#define CCA_C7A			0x71
-#define CCA_C7B			0x72
-#define CCA_C7C			0x73
-
-/**
- * DLP Pico Processor 2600 comes with flash
- * We can do DMA operations from flash for accessing Look Up Tables
- */
-#define DMA_STATUS			0x100
-#define FLASH_ADDR_BYTES		0x74
-#define FLASH_DUMMY_BYTES		0x75
-#define FLASH_WRITE_BYTES		0x76
-#define FLASH_READ_BYTES		0x77
-#define FLASH_OPCODE			0x78
-#define FLASH_START_ADDR		0x79
-#define FLASH_DUMMY2			0x7A
-#define FLASH_WRITE_DATA		0x7B
-
-#define TEMPORAL_DITH_DISABLE		0x7E
-#define SEQ_CONTROL			0x82
-#define SEQ_VECTOR			0x83
-
-/* DMD is Digital Micromirror Device */
-#define DMD_BLOCK_COUNT			0x84
-#define DMD_VCC_CONTROL			0x86
-#define DMD_PARK_PULSE_COUNT		0x87
-#define DMD_PARK_PULSE_WIDTH		0x88
-#define DMD_PARK_DELAY			0x89
-#define DMD_SHADOW_ENABLE		0x8E
-#define SEQ_STATUS			0x8F
-#define FLASH_CLOCK_CONTROL		0x98
-#define DMD_PARK			0x2D
-
-#define SDRAM_BIST_ENABLE		0x46
-#define DDR_DRIVER_STRENGTH		0x9A
-#define SDC_ENABLE			0x9D
-#define SDC_BUFF_SWAP_DISABLE		0xA3
-#define CURTAIN_CONTROL			0xA6
-#define DDR_BUS_SWAP_ENABLE		0xA7
-#define DMD_TRC_ENABLE			0xA8
-#define DMD_BUS_SWAP_ENABLE		0xA9
-
-#define ACTGEN_ENABLE			0xAE
-#define ACTGEN_CONTROL			0xAF
-#define ACTGEN_HORIZ_BP			0xB0
-#define ACTGEN_VERT_BP			0xB1
-
-/* Look Up Table access */
-#define CMT_SPLASH_LUT_START_ADDR	0xFA
-#define CMT_SPLASH_LUT_DEST_SELECT	0xFB
-#define CMT_SPLASH_LUT_DATA		0xFC
-#define SEQ_RESET_LUT_START_ADDR	0xFD
-#define SEQ_RESET_LUT_DEST_SELECT	0xFE
-#define SEQ_RESET_LUT_DATA		0xFF
-
-/* Input source definitions */
-#define PARALLEL_RGB		0
-#define INT_TEST_PATTERN	1
-#define SPLASH_SCREEN		2
-#define CPU_INTF		3
-#define BT656			4
-
-/* Standard input resolution definitions */
-#define QWVGA_LANDSCAPE		3	/* (427h*240v) */
-#define WVGA_864_LANDSCAPE	21	/* (864h*480v) */
-#define WVGA_DMD_OPTICAL_TEST	35	/* (608h*684v) */
-
-/* Standard data format definitions */
-#define RGB565			0
-#define RGB666			1
-#define RGB888			2
-
-/* Test Pattern definitions */
-#define TPG_CHECKERBOARD	0
-#define TPG_BLACK		1
-#define TPG_WHITE		2
-#define TPG_RED			3
-#define TPG_BLUE		4
-#define TPG_GREEN		5
-#define TPG_VLINES_BLACK	6
-#define TPG_HLINES_BLACK	7
-#define TPG_VLINES_ALT		8
-#define TPG_HLINES_ALT		9
-#define TPG_DIAG_LINES		10
-#define TPG_GREYRAMP_VERT	11
-#define TPG_GREYRAMP_HORIZ	12
-#define TPG_ANSI_CHECKERBOARD	13
-
-/* sequence mode definitions */
-#define SEQ_FREE_RUN		0
-#define SEQ_LOCK		1
-
-/* curtain color definitions */
-#define CURTAIN_BLACK		0
-#define CURTAIN_RED		1
-#define CURTAIN_GREEN		2
-#define CURTAIN_BLUE		3
-#define CURTAIN_YELLOW		4
-#define CURTAIN_MAGENTA		5
-#define CURTAIN_CYAN		6
-#define CURTAIN_WHITE		7
-
-/* LUT definitions */
-#define CMT_LUT_NONE		0
-#define CMT_LUT_GREEN		1
-#define CMT_LUT_RED		2
-#define CMT_LUT_BLUE		3
-#define CMT_LUT_ALL		4
-#define SPLASH_LUT		5
-
-#define SEQ_LUT_NONE		0
-#define SEQ_DRC_LUT_0		1
-#define SEQ_DRC_LUT_1		2
-#define SEQ_DRC_LUT_2		3
-#define SEQ_DRC_LUT_3		4
-#define SEQ_SEQ_LUT		5
-#define SEQ_DRC_LUT_ALL		6
-#define WPC_PROGRAM_LUT		7
-
-#define BITSTREAM_START_ADDR		0x00000000
-#define BITSTREAM_SIZE			0x00040000
-
-#define WPC_FW_0_START_ADDR		0x00040000
-#define WPC_FW_0_SIZE			0x00000ce8
-
-#define SEQUENCE_0_START_ADDR		0x00044000
-#define SEQUENCE_0_SIZE			0x00001000
-
-#define SEQUENCE_1_START_ADDR		0x00045000
-#define SEQUENCE_1_SIZE			0x00000d10
-
-#define SEQUENCE_2_START_ADDR		0x00046000
-#define SEQUENCE_2_SIZE			0x00000d10
-
-#define SEQUENCE_3_START_ADDR		0x00047000
-#define SEQUENCE_3_SIZE			0x00000d10
-
-#define SEQUENCE_4_START_ADDR		0x00048000
-#define SEQUENCE_4_SIZE			0x00000d10
-
-#define SEQUENCE_5_START_ADDR		0x00049000
-#define SEQUENCE_5_SIZE			0x00000d10
-
-#define SEQUENCE_6_START_ADDR		0x0004a000
-#define SEQUENCE_6_SIZE			0x00000d10
-
-#define CMT_LUT_0_START_ADDR		0x0004b200
-#define CMT_LUT_0_SIZE			0x00000600
-
-#define CMT_LUT_1_START_ADDR		0x0004b800
-#define CMT_LUT_1_SIZE			0x00000600
-
-#define CMT_LUT_2_START_ADDR		0x0004be00
-#define CMT_LUT_2_SIZE			0x00000600
-
-#define CMT_LUT_3_START_ADDR		0x0004c400
-#define CMT_LUT_3_SIZE			0x00000600
-
-#define CMT_LUT_4_START_ADDR		0x0004ca00
-#define CMT_LUT_4_SIZE			0x00000600
-
-#define CMT_LUT_5_START_ADDR		0x0004d000
-#define CMT_LUT_5_SIZE			0x00000600
-
-#define CMT_LUT_6_START_ADDR		0x0004d600
-#define CMT_LUT_6_SIZE			0x00000600
-
-#define DRC_TABLE_0_START_ADDR		0x0004dc00
-#define DRC_TABLE_0_SIZE		0x00000100
-
-#define SPLASH_0_START_ADDR		0x0004dd00
-#define SPLASH_0_SIZE			0x00032280
-
-#define SEQUENCE_7_START_ADDR		0x00080000
-#define SEQUENCE_7_SIZE			0x00000d10
-
-#define SEQUENCE_8_START_ADDR		0x00081800
-#define SEQUENCE_8_SIZE			0x00000d10
-
-#define SEQUENCE_9_START_ADDR		0x00083000
-#define SEQUENCE_9_SIZE			0x00000d10
-
-#define CMT_LUT_7_START_ADDR		0x0008e000
-#define CMT_LUT_7_SIZE			0x00000600
-
-#define CMT_LUT_8_START_ADDR		0x0008e800
-#define CMT_LUT_8_SIZE			0x00000600
-
-#define CMT_LUT_9_START_ADDR		0x0008f000
-#define CMT_LUT_9_SIZE			0x00000600
-
-#define SPLASH_1_START_ADDR		0x0009a000
-#define SPLASH_1_SIZE			0x00032280
-
-#define SPLASH_2_START_ADDR		0x000cd000
-#define SPLASH_2_SIZE			0x00032280
-
-#define SPLASH_3_START_ADDR		0x00100000
-#define SPLASH_3_SIZE			0x00032280
-
-#define OPT_SPLASH_0_START_ADDR		0x00134000
-#define OPT_SPLASH_0_SIZE		0x000cb100
-
-#endif
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
deleted file mode 100644
index 78f0a6779756..000000000000
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * LCD panel driver for Sharp LS037V7DW01
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-static struct omap_video_timings sharp_ls_timings = {
-	.x_res = 480,
-	.y_res = 640,
-
-	.pixel_clock	= 19200,
-
-	.hsw		= 2,
-	.hfp		= 1,
-	.hbp		= 28,
-
-	.vsw		= 1,
-	.vfp		= 1,
-	.vbp		= 1,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-static inline struct panel_sharp_ls037v7dw01_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct panel_sharp_ls037v7dw01_data *) dssdev->data;
-}
-
-static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
-{
-	struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
-	int r;
-
-	if (!pd)
-		return -EINVAL;
-
-	dssdev->panel.timings = sharp_ls_timings;
-
-	if (gpio_is_valid(pd->mo_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->mo_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd MO");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(pd->lr_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->lr_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd LR");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(pd->ud_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->ud_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd UD");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(pd->resb_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->resb_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RESB");
-		if (r)
-			return r;
-	}
-
-	if (gpio_is_valid(pd->ini_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, pd->ini_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd INI");
-		if (r)
-			return r;
-	}
-
-	return 0;
-}
-
-static void __exit sharp_ls_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int sharp_ls_power_on(struct omap_dss_device *dssdev)
-{
-	struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
-	int r = 0;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	/* wait couple of vsyncs until enabling the LCD */
-	msleep(50);
-
-	if (gpio_is_valid(pd->resb_gpio))
-		gpio_set_value_cansleep(pd->resb_gpio, 1);
-
-	if (gpio_is_valid(pd->ini_gpio))
-		gpio_set_value_cansleep(pd->ini_gpio, 1);
-
-	return 0;
-err0:
-	return r;
-}
-
-static void sharp_ls_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (gpio_is_valid(pd->ini_gpio))
-		gpio_set_value_cansleep(pd->ini_gpio, 0);
-
-	if (gpio_is_valid(pd->resb_gpio))
-		gpio_set_value_cansleep(pd->resb_gpio, 0);
-
-	/* wait at least 5 vsyncs after disabling the LCD */
-
-	msleep(100);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r;
-	r = sharp_ls_power_on(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-	return r;
-}
-
-static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
-{
-	sharp_ls_power_off(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static struct omap_dss_driver sharp_ls_driver = {
-	.probe		= sharp_ls_panel_probe,
-	.remove		= __exit_p(sharp_ls_panel_remove),
-
-	.enable		= sharp_ls_panel_enable,
-	.disable	= sharp_ls_panel_disable,
-
-	.driver         = {
-		.name   = "sharp_ls_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init sharp_ls_panel_drv_init(void)
-{
-	return omap_dss_register_driver(&sharp_ls_driver);
-}
-
-static void __exit sharp_ls_panel_drv_exit(void)
-{
-	omap_dss_unregister_driver(&sharp_ls_driver);
-}
-
-module_init(sharp_ls_panel_drv_init);
-module_exit(sharp_ls_panel_drv_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
deleted file mode 100644
index 54a07da8587a..000000000000
--- a/drivers/video/omap2/displays/panel-taal.c
+++ /dev/null
@@ -1,1551 +0,0 @@
-/*
- * Taal DSI command mode panel
- *
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*#define DEBUG*/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <video/mipi_display.h>
-
-/* DSI Virtual channel. Hardcoded for now. */
-#define TCH 0
-
-#define DCS_READ_NUM_ERRORS	0x05
-#define DCS_BRIGHTNESS		0x51
-#define DCS_CTRL_DISPLAY	0x53
-#define DCS_WRITE_CABC		0x55
-#define DCS_READ_CABC		0x56
-#define DCS_GET_ID1		0xda
-#define DCS_GET_ID2		0xdb
-#define DCS_GET_ID3		0xdc
-
-static irqreturn_t taal_te_isr(int irq, void *data);
-static void taal_te_timeout_work_callback(struct work_struct *work);
-static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
-
-static int taal_panel_reset(struct omap_dss_device *dssdev);
-
-struct taal_data {
-	struct mutex lock;
-
-	struct backlight_device *bldev;
-
-	unsigned long	hw_guard_end;	/* next value of jiffies when we can
-					 * issue the next sleep in/out command
-					 */
-	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
-
-	struct omap_dss_device *dssdev;
-
-	/* panel HW configuration from DT or platform data */
-	int reset_gpio;
-	int ext_te_gpio;
-
-	bool use_dsi_backlight;
-
-	struct omap_dsi_pin_config pin_config;
-
-	/* runtime variables */
-	bool enabled;
-
-	bool te_enabled;
-
-	atomic_t do_update;
-	int channel;
-
-	struct delayed_work te_timeout_work;
-
-	bool cabc_broken;
-	unsigned cabc_mode;
-
-	bool intro_printed;
-
-	struct workqueue_struct *workqueue;
-
-	struct delayed_work esd_work;
-	unsigned esd_interval;
-
-	bool ulps_enabled;
-	unsigned ulps_timeout;
-	struct delayed_work ulps_work;
-};
-
-static void taal_esd_work(struct work_struct *work);
-static void taal_ulps_work(struct work_struct *work);
-
-static void hw_guard_start(struct taal_data *td, int guard_msec)
-{
-	td->hw_guard_wait = msecs_to_jiffies(guard_msec);
-	td->hw_guard_end = jiffies + td->hw_guard_wait;
-}
-
-static void hw_guard_wait(struct taal_data *td)
-{
-	unsigned long wait = td->hw_guard_end - jiffies;
-
-	if ((long)wait > 0 && wait <= td->hw_guard_wait) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(wait);
-	}
-}
-
-static int taal_dcs_read_1(struct taal_data *td, u8 dcs_cmd, u8 *data)
-{
-	int r;
-	u8 buf[1];
-
-	r = dsi_vc_dcs_read(td->dssdev, td->channel, dcs_cmd, buf, 1);
-
-	if (r < 0)
-		return r;
-
-	*data = buf[0];
-
-	return 0;
-}
-
-static int taal_dcs_write_0(struct taal_data *td, u8 dcs_cmd)
-{
-	return dsi_vc_dcs_write(td->dssdev, td->channel, &dcs_cmd, 1);
-}
-
-static int taal_dcs_write_1(struct taal_data *td, u8 dcs_cmd, u8 param)
-{
-	u8 buf[2];
-	buf[0] = dcs_cmd;
-	buf[1] = param;
-	return dsi_vc_dcs_write(td->dssdev, td->channel, buf, 2);
-}
-
-static int taal_sleep_in(struct taal_data *td)
-
-{
-	u8 cmd;
-	int r;
-
-	hw_guard_wait(td);
-
-	cmd = MIPI_DCS_ENTER_SLEEP_MODE;
-	r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, &cmd, 1);
-	if (r)
-		return r;
-
-	hw_guard_start(td, 120);
-
-	msleep(5);
-
-	return 0;
-}
-
-static int taal_sleep_out(struct taal_data *td)
-{
-	int r;
-
-	hw_guard_wait(td);
-
-	r = taal_dcs_write_0(td, MIPI_DCS_EXIT_SLEEP_MODE);
-	if (r)
-		return r;
-
-	hw_guard_start(td, 120);
-
-	msleep(5);
-
-	return 0;
-}
-
-static int taal_get_id(struct taal_data *td, u8 *id1, u8 *id2, u8 *id3)
-{
-	int r;
-
-	r = taal_dcs_read_1(td, DCS_GET_ID1, id1);
-	if (r)
-		return r;
-	r = taal_dcs_read_1(td, DCS_GET_ID2, id2);
-	if (r)
-		return r;
-	r = taal_dcs_read_1(td, DCS_GET_ID3, id3);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static int taal_set_update_window(struct taal_data *td,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	int r;
-	u16 x1 = x;
-	u16 x2 = x + w - 1;
-	u16 y1 = y;
-	u16 y2 = y + h - 1;
-
-	u8 buf[5];
-	buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
-	buf[1] = (x1 >> 8) & 0xff;
-	buf[2] = (x1 >> 0) & 0xff;
-	buf[3] = (x2 >> 8) & 0xff;
-	buf[4] = (x2 >> 0) & 0xff;
-
-	r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, buf, sizeof(buf));
-	if (r)
-		return r;
-
-	buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
-	buf[1] = (y1 >> 8) & 0xff;
-	buf[2] = (y1 >> 0) & 0xff;
-	buf[3] = (y2 >> 8) & 0xff;
-	buf[4] = (y2 >> 0) & 0xff;
-
-	r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, buf, sizeof(buf));
-	if (r)
-		return r;
-
-	dsi_vc_send_bta_sync(td->dssdev, td->channel);
-
-	return r;
-}
-
-static void taal_queue_esd_work(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	if (td->esd_interval > 0)
-		queue_delayed_work(td->workqueue, &td->esd_work,
-				msecs_to_jiffies(td->esd_interval));
-}
-
-static void taal_cancel_esd_work(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	cancel_delayed_work(&td->esd_work);
-}
-
-static void taal_queue_ulps_work(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	if (td->ulps_timeout > 0)
-		queue_delayed_work(td->workqueue, &td->ulps_work,
-				msecs_to_jiffies(td->ulps_timeout));
-}
-
-static void taal_cancel_ulps_work(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	cancel_delayed_work(&td->ulps_work);
-}
-
-static int taal_enter_ulps(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	if (td->ulps_enabled)
-		return 0;
-
-	taal_cancel_ulps_work(dssdev);
-
-	r = _taal_enable_te(dssdev, false);
-	if (r)
-		goto err;
-
-	if (gpio_is_valid(td->ext_te_gpio))
-		disable_irq(gpio_to_irq(td->ext_te_gpio));
-
-	omapdss_dsi_display_disable(dssdev, false, true);
-
-	td->ulps_enabled = true;
-
-	return 0;
-
-err:
-	dev_err(dssdev->dev, "enter ULPS failed");
-	taal_panel_reset(dssdev);
-
-	td->ulps_enabled = false;
-
-	taal_queue_ulps_work(dssdev);
-
-	return r;
-}
-
-static int taal_exit_ulps(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	if (!td->ulps_enabled)
-		return 0;
-
-	r = omapdss_dsi_display_enable(dssdev);
-	if (r) {
-		dev_err(dssdev->dev, "failed to enable DSI\n");
-		goto err1;
-	}
-
-	omapdss_dsi_vc_enable_hs(dssdev, td->channel, true);
-
-	r = _taal_enable_te(dssdev, true);
-	if (r) {
-		dev_err(dssdev->dev, "failed to re-enable TE");
-		goto err2;
-	}
-
-	if (gpio_is_valid(td->ext_te_gpio))
-		enable_irq(gpio_to_irq(td->ext_te_gpio));
-
-	taal_queue_ulps_work(dssdev);
-
-	td->ulps_enabled = false;
-
-	return 0;
-
-err2:
-	dev_err(dssdev->dev, "failed to exit ULPS");
-
-	r = taal_panel_reset(dssdev);
-	if (!r) {
-		if (gpio_is_valid(td->ext_te_gpio))
-			enable_irq(gpio_to_irq(td->ext_te_gpio));
-		td->ulps_enabled = false;
-	}
-err1:
-	taal_queue_ulps_work(dssdev);
-
-	return r;
-}
-
-static int taal_wake_up(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	if (td->ulps_enabled)
-		return taal_exit_ulps(dssdev);
-
-	taal_cancel_ulps_work(dssdev);
-	taal_queue_ulps_work(dssdev);
-	return 0;
-}
-
-static int taal_bl_update_status(struct backlight_device *dev)
-{
-	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-	int level;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
-
-	dev_dbg(dssdev->dev, "update brightness to %d\n", level);
-
-	mutex_lock(&td->lock);
-
-	if (td->enabled) {
-		dsi_bus_lock(dssdev);
-
-		r = taal_wake_up(dssdev);
-		if (!r)
-			r = taal_dcs_write_1(td, DCS_BRIGHTNESS, level);
-
-		dsi_bus_unlock(dssdev);
-	} else {
-		r = 0;
-	}
-
-	mutex_unlock(&td->lock);
-
-	return r;
-}
-
-static int taal_bl_get_intensity(struct backlight_device *dev)
-{
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		return dev->props.brightness;
-
-	return 0;
-}
-
-static const struct backlight_ops taal_bl_ops = {
-	.get_brightness = taal_bl_get_intensity,
-	.update_status  = taal_bl_update_status,
-};
-
-static void taal_get_resolution(struct omap_dss_device *dssdev,
-		u16 *xres, u16 *yres)
-{
-	*xres = dssdev->panel.timings.x_res;
-	*yres = dssdev->panel.timings.y_res;
-}
-
-static ssize_t taal_num_errors_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	u8 errors = 0;
-	int r;
-
-	mutex_lock(&td->lock);
-
-	if (td->enabled) {
-		dsi_bus_lock(dssdev);
-
-		r = taal_wake_up(dssdev);
-		if (!r)
-			r = taal_dcs_read_1(td, DCS_READ_NUM_ERRORS, &errors);
-
-		dsi_bus_unlock(dssdev);
-	} else {
-		r = -ENODEV;
-	}
-
-	mutex_unlock(&td->lock);
-
-	if (r)
-		return r;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
-}
-
-static ssize_t taal_hw_revision_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	u8 id1, id2, id3;
-	int r;
-
-	mutex_lock(&td->lock);
-
-	if (td->enabled) {
-		dsi_bus_lock(dssdev);
-
-		r = taal_wake_up(dssdev);
-		if (!r)
-			r = taal_get_id(td, &id1, &id2, &id3);
-
-		dsi_bus_unlock(dssdev);
-	} else {
-		r = -ENODEV;
-	}
-
-	mutex_unlock(&td->lock);
-
-	if (r)
-		return r;
-
-	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
-}
-
-static const char *cabc_modes[] = {
-	"off",		/* used also always when CABC is not supported */
-	"ui",
-	"still-image",
-	"moving-image",
-};
-
-static ssize_t show_cabc_mode(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	const char *mode_str;
-	int mode;
-	int len;
-
-	mode = td->cabc_mode;
-
-	mode_str = "unknown";
-	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
-		mode_str = cabc_modes[mode];
-	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
-
-	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
-}
-
-static ssize_t store_cabc_mode(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int i;
-	int r;
-
-	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
-		if (sysfs_streq(cabc_modes[i], buf))
-			break;
-	}
-
-	if (i == ARRAY_SIZE(cabc_modes))
-		return -EINVAL;
-
-	mutex_lock(&td->lock);
-
-	if (td->enabled) {
-		dsi_bus_lock(dssdev);
-
-		if (!td->cabc_broken) {
-			r = taal_wake_up(dssdev);
-			if (r)
-				goto err;
-
-			r = taal_dcs_write_1(td, DCS_WRITE_CABC, i);
-			if (r)
-				goto err;
-		}
-
-		dsi_bus_unlock(dssdev);
-	}
-
-	td->cabc_mode = i;
-
-	mutex_unlock(&td->lock);
-
-	return count;
-err:
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static ssize_t show_cabc_available_modes(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	int len;
-	int i;
-
-	for (i = 0, len = 0;
-	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
-		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
-			i ? " " : "", cabc_modes[i],
-			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
-
-	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
-}
-
-static ssize_t taal_store_esd_interval(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	unsigned long t;
-	int r;
-
-	r = kstrtoul(buf, 10, &t);
-	if (r)
-		return r;
-
-	mutex_lock(&td->lock);
-	taal_cancel_esd_work(dssdev);
-	td->esd_interval = t;
-	if (td->enabled)
-		taal_queue_esd_work(dssdev);
-	mutex_unlock(&td->lock);
-
-	return count;
-}
-
-static ssize_t taal_show_esd_interval(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	unsigned t;
-
-	mutex_lock(&td->lock);
-	t = td->esd_interval;
-	mutex_unlock(&td->lock);
-
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
-}
-
-static ssize_t taal_store_ulps(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	unsigned long t;
-	int r;
-
-	r = kstrtoul(buf, 10, &t);
-	if (r)
-		return r;
-
-	mutex_lock(&td->lock);
-
-	if (td->enabled) {
-		dsi_bus_lock(dssdev);
-
-		if (t)
-			r = taal_enter_ulps(dssdev);
-		else
-			r = taal_wake_up(dssdev);
-
-		dsi_bus_unlock(dssdev);
-	}
-
-	mutex_unlock(&td->lock);
-
-	if (r)
-		return r;
-
-	return count;
-}
-
-static ssize_t taal_show_ulps(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	unsigned t;
-
-	mutex_lock(&td->lock);
-	t = td->ulps_enabled;
-	mutex_unlock(&td->lock);
-
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
-}
-
-static ssize_t taal_store_ulps_timeout(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	unsigned long t;
-	int r;
-
-	r = kstrtoul(buf, 10, &t);
-	if (r)
-		return r;
-
-	mutex_lock(&td->lock);
-	td->ulps_timeout = t;
-
-	if (td->enabled) {
-		/* taal_wake_up will restart the timer */
-		dsi_bus_lock(dssdev);
-		r = taal_wake_up(dssdev);
-		dsi_bus_unlock(dssdev);
-	}
-
-	mutex_unlock(&td->lock);
-
-	if (r)
-		return r;
-
-	return count;
-}
-
-static ssize_t taal_show_ulps_timeout(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	unsigned t;
-
-	mutex_lock(&td->lock);
-	t = td->ulps_timeout;
-	mutex_unlock(&td->lock);
-
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
-}
-
-static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL);
-static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL);
-static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
-		show_cabc_mode, store_cabc_mode);
-static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
-		show_cabc_available_modes, NULL);
-static DEVICE_ATTR(esd_interval, S_IRUGO | S_IWUSR,
-		taal_show_esd_interval, taal_store_esd_interval);
-static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
-		taal_show_ulps, taal_store_ulps);
-static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
-		taal_show_ulps_timeout, taal_store_ulps_timeout);
-
-static struct attribute *taal_attrs[] = {
-	&dev_attr_num_dsi_errors.attr,
-	&dev_attr_hw_revision.attr,
-	&dev_attr_cabc_mode.attr,
-	&dev_attr_cabc_available_modes.attr,
-	&dev_attr_esd_interval.attr,
-	&dev_attr_ulps.attr,
-	&dev_attr_ulps_timeout.attr,
-	NULL,
-};
-
-static struct attribute_group taal_attr_group = {
-	.attrs = taal_attrs,
-};
-
-static void taal_hw_reset(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	if (!gpio_is_valid(td->reset_gpio))
-		return;
-
-	gpio_set_value(td->reset_gpio, 1);
-	udelay(10);
-	/* reset the panel */
-	gpio_set_value(td->reset_gpio, 0);
-	/* assert reset */
-	udelay(10);
-	gpio_set_value(td->reset_gpio, 1);
-	/* wait after releasing reset */
-	msleep(5);
-}
-
-static void taal_probe_pdata(struct taal_data *td,
-		const struct nokia_dsi_panel_data *pdata)
-{
-	td->reset_gpio = pdata->reset_gpio;
-
-	if (pdata->use_ext_te)
-		td->ext_te_gpio = pdata->ext_te_gpio;
-	else
-		td->ext_te_gpio = -1;
-
-	td->esd_interval = pdata->esd_interval;
-	td->ulps_timeout = pdata->ulps_timeout;
-
-	td->use_dsi_backlight = pdata->use_dsi_backlight;
-
-	td->pin_config = pdata->pin_config;
-}
-
-static int taal_probe(struct omap_dss_device *dssdev)
-{
-	struct backlight_properties props;
-	struct taal_data *td;
-	struct backlight_device *bldev = NULL;
-	int r;
-
-	dev_dbg(dssdev->dev, "probe\n");
-
-	td = devm_kzalloc(dssdev->dev, sizeof(*td), GFP_KERNEL);
-	if (!td)
-		return -ENOMEM;
-
-	dev_set_drvdata(dssdev->dev, td);
-	td->dssdev = dssdev;
-
-	if (dssdev->data) {
-		const struct nokia_dsi_panel_data *pdata = dssdev->data;
-
-		taal_probe_pdata(td, pdata);
-	} else {
-		return -ENODEV;
-	}
-
-	dssdev->panel.timings.x_res = 864;
-	dssdev->panel.timings.y_res = 480;
-	dssdev->panel.timings.pixel_clock = DIV_ROUND_UP(864 * 480 * 60, 1000);
-	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
-	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
-		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
-
-	mutex_init(&td->lock);
-
-	atomic_set(&td->do_update, 0);
-
-	if (gpio_is_valid(td->reset_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, td->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "taal rst");
-		if (r) {
-			dev_err(dssdev->dev, "failed to request reset gpio\n");
-			return r;
-		}
-	}
-
-	if (gpio_is_valid(td->ext_te_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, td->ext_te_gpio,
-				GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(dssdev->dev, "GPIO request failed\n");
-			return r;
-		}
-
-		r = devm_request_irq(dssdev->dev, gpio_to_irq(td->ext_te_gpio),
-				taal_te_isr,
-				IRQF_TRIGGER_RISING,
-				"taal vsync", dssdev);
-
-		if (r) {
-			dev_err(dssdev->dev, "IRQ request failed\n");
-			return r;
-		}
-
-		INIT_DEFERRABLE_WORK(&td->te_timeout_work,
-					taal_te_timeout_work_callback);
-
-		dev_dbg(dssdev->dev, "Using GPIO TE\n");
-	}
-
-	td->workqueue = create_singlethread_workqueue("taal_esd");
-	if (td->workqueue == NULL) {
-		dev_err(dssdev->dev, "can't create ESD workqueue\n");
-		return -ENOMEM;
-	}
-	INIT_DEFERRABLE_WORK(&td->esd_work, taal_esd_work);
-	INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
-
-	taal_hw_reset(dssdev);
-
-	if (td->use_dsi_backlight) {
-		memset(&props, 0, sizeof(struct backlight_properties));
-		props.max_brightness = 255;
-
-		props.type = BACKLIGHT_RAW;
-		bldev = backlight_device_register(dev_name(dssdev->dev),
-				dssdev->dev, dssdev, &taal_bl_ops, &props);
-		if (IS_ERR(bldev)) {
-			r = PTR_ERR(bldev);
-			goto err_bl;
-		}
-
-		td->bldev = bldev;
-
-		bldev->props.fb_blank = FB_BLANK_UNBLANK;
-		bldev->props.power = FB_BLANK_UNBLANK;
-		bldev->props.brightness = 255;
-
-		taal_bl_update_status(bldev);
-	}
-
-	r = omap_dsi_request_vc(dssdev, &td->channel);
-	if (r) {
-		dev_err(dssdev->dev, "failed to get virtual channel\n");
-		goto err_req_vc;
-	}
-
-	r = omap_dsi_set_vc_id(dssdev, td->channel, TCH);
-	if (r) {
-		dev_err(dssdev->dev, "failed to set VC_ID\n");
-		goto err_vc_id;
-	}
-
-	r = sysfs_create_group(&dssdev->dev->kobj, &taal_attr_group);
-	if (r) {
-		dev_err(dssdev->dev, "failed to create sysfs files\n");
-		goto err_vc_id;
-	}
-
-	return 0;
-
-err_vc_id:
-	omap_dsi_release_vc(dssdev, td->channel);
-err_req_vc:
-	if (bldev != NULL)
-		backlight_device_unregister(bldev);
-err_bl:
-	destroy_workqueue(td->workqueue);
-	return r;
-}
-
-static void __exit taal_remove(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	struct backlight_device *bldev;
-
-	dev_dbg(dssdev->dev, "remove\n");
-
-	sysfs_remove_group(&dssdev->dev->kobj, &taal_attr_group);
-	omap_dsi_release_vc(dssdev, td->channel);
-
-	bldev = td->bldev;
-	if (bldev != NULL) {
-		bldev->props.power = FB_BLANK_POWERDOWN;
-		taal_bl_update_status(bldev);
-		backlight_device_unregister(bldev);
-	}
-
-	taal_cancel_ulps_work(dssdev);
-	taal_cancel_esd_work(dssdev);
-	destroy_workqueue(td->workqueue);
-
-	/* reset, to be sure that the panel is in a valid state */
-	taal_hw_reset(dssdev);
-}
-
-static int taal_power_on(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	u8 id1, id2, id3;
-	int r;
-	struct omap_dss_dsi_config dsi_config = {
-		.mode = OMAP_DSS_DSI_CMD_MODE,
-		.pixel_format = OMAP_DSS_DSI_FMT_RGB888,
-		.timings = &dssdev->panel.timings,
-		.hs_clk_min = 150000000,
-		.hs_clk_max = 300000000,
-		.lp_clk_min = 7000000,
-		.lp_clk_max = 10000000,
-	};
-
-	r = omapdss_dsi_configure_pins(dssdev, &td->pin_config);
-	if (r) {
-		dev_err(dssdev->dev, "failed to configure DSI pins\n");
-		goto err0;
-	};
-
-	r = omapdss_dsi_set_config(dssdev, &dsi_config);
-	if (r) {
-		dev_err(dssdev->dev, "failed to configure DSI\n");
-		goto err0;
-	}
-
-	r = omapdss_dsi_display_enable(dssdev);
-	if (r) {
-		dev_err(dssdev->dev, "failed to enable DSI\n");
-		goto err0;
-	}
-
-	taal_hw_reset(dssdev);
-
-	omapdss_dsi_vc_enable_hs(dssdev, td->channel, false);
-
-	r = taal_sleep_out(td);
-	if (r)
-		goto err;
-
-	r = taal_get_id(td, &id1, &id2, &id3);
-	if (r)
-		goto err;
-
-	/* on early Taal revisions CABC is broken */
-	if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
-		td->cabc_broken = true;
-
-	r = taal_dcs_write_1(td, DCS_BRIGHTNESS, 0xff);
-	if (r)
-		goto err;
-
-	r = taal_dcs_write_1(td, DCS_CTRL_DISPLAY,
-			(1<<2) | (1<<5));	/* BL | BCTRL */
-	if (r)
-		goto err;
-
-	r = taal_dcs_write_1(td, MIPI_DCS_SET_PIXEL_FORMAT,
-		MIPI_DCS_PIXEL_FMT_24BIT);
-	if (r)
-		goto err;
-
-	if (!td->cabc_broken) {
-		r = taal_dcs_write_1(td, DCS_WRITE_CABC, td->cabc_mode);
-		if (r)
-			goto err;
-	}
-
-	r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_ON);
-	if (r)
-		goto err;
-
-	r = _taal_enable_te(dssdev, td->te_enabled);
-	if (r)
-		goto err;
-
-	r = dsi_enable_video_output(dssdev, td->channel);
-	if (r)
-		goto err;
-
-	td->enabled = 1;
-
-	if (!td->intro_printed) {
-		dev_info(dssdev->dev, "panel revision %02x.%02x.%02x\n",
-			id1, id2, id3);
-		if (td->cabc_broken)
-			dev_info(dssdev->dev,
-					"old Taal version, CABC disabled\n");
-		td->intro_printed = true;
-	}
-
-	omapdss_dsi_vc_enable_hs(dssdev, td->channel, true);
-
-	return 0;
-err:
-	dev_err(dssdev->dev, "error while enabling panel, issuing HW reset\n");
-
-	taal_hw_reset(dssdev);
-
-	omapdss_dsi_display_disable(dssdev, true, false);
-err0:
-	return r;
-}
-
-static void taal_power_off(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	dsi_disable_video_output(dssdev, td->channel);
-
-	r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_OFF);
-	if (!r)
-		r = taal_sleep_in(td);
-
-	if (r) {
-		dev_err(dssdev->dev,
-				"error disabling panel, issuing HW reset\n");
-		taal_hw_reset(dssdev);
-	}
-
-	omapdss_dsi_display_disable(dssdev, true, false);
-
-	td->enabled = 0;
-}
-
-static int taal_panel_reset(struct omap_dss_device *dssdev)
-{
-	dev_err(dssdev->dev, "performing LCD reset\n");
-
-	taal_power_off(dssdev);
-	taal_hw_reset(dssdev);
-	return taal_power_on(dssdev);
-}
-
-static int taal_enable(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	dev_dbg(dssdev->dev, "enable\n");
-
-	mutex_lock(&td->lock);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		r = -EINVAL;
-		goto err;
-	}
-
-	dsi_bus_lock(dssdev);
-
-	r = taal_power_on(dssdev);
-
-	dsi_bus_unlock(dssdev);
-
-	if (r)
-		goto err;
-
-	taal_queue_esd_work(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&td->lock);
-
-	return 0;
-err:
-	dev_dbg(dssdev->dev, "enable failed\n");
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static void taal_disable(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	dev_dbg(dssdev->dev, "disable\n");
-
-	mutex_lock(&td->lock);
-
-	taal_cancel_ulps_work(dssdev);
-	taal_cancel_esd_work(dssdev);
-
-	dsi_bus_lock(dssdev);
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		int r;
-
-		r = taal_wake_up(dssdev);
-		if (!r)
-			taal_power_off(dssdev);
-	}
-
-	dsi_bus_unlock(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&td->lock);
-}
-
-static void taal_framedone_cb(int err, void *data)
-{
-	struct omap_dss_device *dssdev = data;
-	dev_dbg(dssdev->dev, "framedone, err %d\n", err);
-	dsi_bus_unlock(dssdev);
-}
-
-static irqreturn_t taal_te_isr(int irq, void *data)
-{
-	struct omap_dss_device *dssdev = data;
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int old;
-	int r;
-
-	old = atomic_cmpxchg(&td->do_update, 1, 0);
-
-	if (old) {
-		cancel_delayed_work(&td->te_timeout_work);
-
-		r = omap_dsi_update(dssdev, td->channel, taal_framedone_cb,
-				dssdev);
-		if (r)
-			goto err;
-	}
-
-	return IRQ_HANDLED;
-err:
-	dev_err(dssdev->dev, "start update failed\n");
-	dsi_bus_unlock(dssdev);
-	return IRQ_HANDLED;
-}
-
-static void taal_te_timeout_work_callback(struct work_struct *work)
-{
-	struct taal_data *td = container_of(work, struct taal_data,
-					te_timeout_work.work);
-	struct omap_dss_device *dssdev = td->dssdev;
-
-	dev_err(dssdev->dev, "TE not received for 250ms!\n");
-
-	atomic_set(&td->do_update, 0);
-	dsi_bus_unlock(dssdev);
-}
-
-static int taal_update(struct omap_dss_device *dssdev,
-				    u16 x, u16 y, u16 w, u16 h)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	dev_dbg(dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
-
-	mutex_lock(&td->lock);
-	dsi_bus_lock(dssdev);
-
-	r = taal_wake_up(dssdev);
-	if (r)
-		goto err;
-
-	if (!td->enabled) {
-		r = 0;
-		goto err;
-	}
-
-	/* XXX no need to send this every frame, but dsi break if not done */
-	r = taal_set_update_window(td, 0, 0,
-			dssdev->panel.timings.x_res,
-			dssdev->panel.timings.y_res);
-	if (r)
-		goto err;
-
-	if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
-		schedule_delayed_work(&td->te_timeout_work,
-				msecs_to_jiffies(250));
-		atomic_set(&td->do_update, 1);
-	} else {
-		r = omap_dsi_update(dssdev, td->channel, taal_framedone_cb,
-				dssdev);
-		if (r)
-			goto err;
-	}
-
-	/* note: no bus_unlock here. unlock is in framedone_cb */
-	mutex_unlock(&td->lock);
-	return 0;
-err:
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static int taal_sync(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	dev_dbg(dssdev->dev, "sync\n");
-
-	mutex_lock(&td->lock);
-	dsi_bus_lock(dssdev);
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-
-	dev_dbg(dssdev->dev, "sync done\n");
-
-	return 0;
-}
-
-static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	if (enable)
-		r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
-	else
-		r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
-
-	if (!gpio_is_valid(td->ext_te_gpio))
-		omapdss_dsi_enable_te(dssdev, enable);
-
-	/* possible panel bug */
-	msleep(100);
-
-	return r;
-}
-
-static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&td->lock);
-
-	if (td->te_enabled == enable)
-		goto end;
-
-	dsi_bus_lock(dssdev);
-
-	if (td->enabled) {
-		r = taal_wake_up(dssdev);
-		if (r)
-			goto err;
-
-		r = _taal_enable_te(dssdev, enable);
-		if (r)
-			goto err;
-	}
-
-	td->te_enabled = enable;
-
-	dsi_bus_unlock(dssdev);
-end:
-	mutex_unlock(&td->lock);
-
-	return 0;
-err:
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-
-	return r;
-}
-
-static int taal_get_te(struct omap_dss_device *dssdev)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&td->lock);
-	r = td->te_enabled;
-	mutex_unlock(&td->lock);
-
-	return r;
-}
-
-static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
-{
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-	u8 id1, id2, id3;
-	int r;
-
-	mutex_lock(&td->lock);
-
-	if (!td->enabled) {
-		r = -ENODEV;
-		goto err1;
-	}
-
-	dsi_bus_lock(dssdev);
-
-	r = taal_wake_up(dssdev);
-	if (r)
-		goto err2;
-
-	r = taal_dcs_read_1(td, DCS_GET_ID1, &id1);
-	if (r)
-		goto err2;
-	r = taal_dcs_read_1(td, DCS_GET_ID2, &id2);
-	if (r)
-		goto err2;
-	r = taal_dcs_read_1(td, DCS_GET_ID3, &id3);
-	if (r)
-		goto err2;
-
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-	return 0;
-err2:
-	dsi_bus_unlock(dssdev);
-err1:
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static int taal_memory_read(struct omap_dss_device *dssdev,
-		void *buf, size_t size,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	int r;
-	int first = 1;
-	int plen;
-	unsigned buf_used = 0;
-	struct taal_data *td = dev_get_drvdata(dssdev->dev);
-
-	if (size < w * h * 3)
-		return -ENOMEM;
-
-	mutex_lock(&td->lock);
-
-	if (!td->enabled) {
-		r = -ENODEV;
-		goto err1;
-	}
-
-	size = min(w * h * 3,
-			dssdev->panel.timings.x_res *
-			dssdev->panel.timings.y_res * 3);
-
-	dsi_bus_lock(dssdev);
-
-	r = taal_wake_up(dssdev);
-	if (r)
-		goto err2;
-
-	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
-	 * use short packets. plen 32 works, but bigger packets seem to cause
-	 * an error. */
-	if (size % 2)
-		plen = 1;
-	else
-		plen = 2;
-
-	taal_set_update_window(td, x, y, w, h);
-
-	r = dsi_vc_set_max_rx_packet_size(dssdev, td->channel, plen);
-	if (r)
-		goto err2;
-
-	while (buf_used < size) {
-		u8 dcs_cmd = first ? 0x2e : 0x3e;
-		first = 0;
-
-		r = dsi_vc_dcs_read(dssdev, td->channel, dcs_cmd,
-				buf + buf_used, size - buf_used);
-
-		if (r < 0) {
-			dev_err(dssdev->dev, "read error\n");
-			goto err3;
-		}
-
-		buf_used += r;
-
-		if (r < plen) {
-			dev_err(dssdev->dev, "short read\n");
-			break;
-		}
-
-		if (signal_pending(current)) {
-			dev_err(dssdev->dev, "signal pending, "
-					"aborting memory read\n");
-			r = -ERESTARTSYS;
-			goto err3;
-		}
-	}
-
-	r = buf_used;
-
-err3:
-	dsi_vc_set_max_rx_packet_size(dssdev, td->channel, 1);
-err2:
-	dsi_bus_unlock(dssdev);
-err1:
-	mutex_unlock(&td->lock);
-	return r;
-}
-
-static void taal_ulps_work(struct work_struct *work)
-{
-	struct taal_data *td = container_of(work, struct taal_data,
-			ulps_work.work);
-	struct omap_dss_device *dssdev = td->dssdev;
-
-	mutex_lock(&td->lock);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !td->enabled) {
-		mutex_unlock(&td->lock);
-		return;
-	}
-
-	dsi_bus_lock(dssdev);
-
-	taal_enter_ulps(dssdev);
-
-	dsi_bus_unlock(dssdev);
-	mutex_unlock(&td->lock);
-}
-
-static void taal_esd_work(struct work_struct *work)
-{
-	struct taal_data *td = container_of(work, struct taal_data,
-			esd_work.work);
-	struct omap_dss_device *dssdev = td->dssdev;
-	u8 state1, state2;
-	int r;
-
-	mutex_lock(&td->lock);
-
-	if (!td->enabled) {
-		mutex_unlock(&td->lock);
-		return;
-	}
-
-	dsi_bus_lock(dssdev);
-
-	r = taal_wake_up(dssdev);
-	if (r) {
-		dev_err(dssdev->dev, "failed to exit ULPS\n");
-		goto err;
-	}
-
-	r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state1);
-	if (r) {
-		dev_err(dssdev->dev, "failed to read Taal status\n");
-		goto err;
-	}
-
-	/* Run self diagnostics */
-	r = taal_sleep_out(td);
-	if (r) {
-		dev_err(dssdev->dev, "failed to run Taal self-diagnostics\n");
-		goto err;
-	}
-
-	r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state2);
-	if (r) {
-		dev_err(dssdev->dev, "failed to read Taal status\n");
-		goto err;
-	}
-
-	/* Each sleep out command will trigger a self diagnostic and flip
-	 * Bit6 if the test passes.
-	 */
-	if (!((state1 ^ state2) & (1 << 6))) {
-		dev_err(dssdev->dev, "LCD self diagnostics failed\n");
-		goto err;
-	}
-	/* Self-diagnostics result is also shown on TE GPIO line. We need
-	 * to re-enable TE after self diagnostics */
-	if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
-		r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
-		if (r)
-			goto err;
-	}
-
-	dsi_bus_unlock(dssdev);
-
-	taal_queue_esd_work(dssdev);
-
-	mutex_unlock(&td->lock);
-	return;
-err:
-	dev_err(dssdev->dev, "performing LCD reset\n");
-
-	taal_panel_reset(dssdev);
-
-	dsi_bus_unlock(dssdev);
-
-	taal_queue_esd_work(dssdev);
-
-	mutex_unlock(&td->lock);
-}
-
-static struct omap_dss_driver taal_driver = {
-	.probe		= taal_probe,
-	.remove		= __exit_p(taal_remove),
-
-	.enable		= taal_enable,
-	.disable	= taal_disable,
-
-	.update		= taal_update,
-	.sync		= taal_sync,
-
-	.get_resolution	= taal_get_resolution,
-	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
-
-	.enable_te	= taal_enable_te,
-	.get_te		= taal_get_te,
-
-	.run_test	= taal_run_test,
-	.memory_read	= taal_memory_read,
-
-	.driver         = {
-		.name   = "taal",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init taal_init(void)
-{
-	omap_dss_register_driver(&taal_driver);
-
-	return 0;
-}
-
-static void __exit taal_exit(void)
-{
-	omap_dss_unregister_driver(&taal_driver);
-}
-
-module_init(taal_init);
-module_exit(taal_exit);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
-MODULE_DESCRIPTION("Taal Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
deleted file mode 100644
index 1fdfb158a2a9..000000000000
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * TFP410 DPI-to-DVI chip
- *
- * Copyright (C) 2011 Texas Instruments Inc
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <video/omapdss.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <drm/drm_edid.h>
-
-#include <video/omap-panel-data.h>
-
-static const struct omap_video_timings tfp410_default_timings = {
-	.x_res		= 640,
-	.y_res		= 480,
-
-	.pixel_clock	= 23500,
-
-	.hfp		= 48,
-	.hsw		= 32,
-	.hbp		= 80,
-
-	.vfp		= 3,
-	.vsw		= 4,
-	.vbp		= 7,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-struct panel_drv_data {
-	struct omap_dss_device *dssdev;
-
-	struct mutex lock;
-
-	int pd_gpio;
-
-	struct i2c_adapter *i2c_adapter;
-};
-
-static int tfp410_power_on(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 1);
-
-	return 0;
-err0:
-	return r;
-}
-
-static void tfp410_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 0);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int tfp410_probe(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata;
-	int r;
-	int i2c_bus_num;
-
-	ddata = devm_kzalloc(dssdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	dssdev->panel.timings = tfp410_default_timings;
-
-	ddata->dssdev = dssdev;
-	mutex_init(&ddata->lock);
-
-	if (dssdev->data) {
-		struct tfp410_platform_data *pdata = dssdev->data;
-
-		ddata->pd_gpio = pdata->power_down_gpio;
-		i2c_bus_num = pdata->i2c_bus_num;
-	} else {
-		ddata->pd_gpio = -1;
-		i2c_bus_num = -1;
-	}
-
-	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = devm_gpio_request_one(dssdev->dev, ddata->pd_gpio,
-				GPIOF_OUT_INIT_LOW, "tfp410 pd");
-		if (r) {
-			dev_err(dssdev->dev, "Failed to request PD GPIO %d\n",
-					ddata->pd_gpio);
-			return r;
-		}
-	}
-
-	if (i2c_bus_num != -1) {
-		struct i2c_adapter *adapter;
-
-		adapter = i2c_get_adapter(i2c_bus_num);
-		if (!adapter) {
-			dev_err(dssdev->dev, "Failed to get I2C adapter, bus %d\n",
-					i2c_bus_num);
-			return -EPROBE_DEFER;
-		}
-
-		ddata->i2c_adapter = adapter;
-	}
-
-	dev_set_drvdata(dssdev->dev, ddata);
-
-	return 0;
-}
-
-static void __exit tfp410_remove(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-
-	if (ddata->i2c_adapter)
-		i2c_put_adapter(ddata->i2c_adapter);
-
-	dev_set_drvdata(dssdev->dev, NULL);
-
-	mutex_unlock(&ddata->lock);
-}
-
-static int tfp410_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	r = tfp410_power_on(dssdev);
-	if (r == 0)
-		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static void tfp410_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-
-	tfp410_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&ddata->lock);
-}
-
-static void tfp410_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-	omapdss_dpi_set_timings(dssdev, timings);
-	dssdev->panel.timings = *timings;
-	mutex_unlock(&ddata->lock);
-}
-
-static void tfp410_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-	*timings = dssdev->panel.timings;
-	mutex_unlock(&ddata->lock);
-}
-
-static int tfp410_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	mutex_lock(&ddata->lock);
-	r = dpi_check_timings(dssdev, timings);
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-
-static int tfp410_ddc_read(struct i2c_adapter *adapter,
-		unsigned char *buf, u16 count, u8 offset)
-{
-	int r, retries;
-
-	for (retries = 3; retries > 0; retries--) {
-		struct i2c_msg msgs[] = {
-			{
-				.addr   = DDC_ADDR,
-				.flags  = 0,
-				.len    = 1,
-				.buf    = &offset,
-			}, {
-				.addr   = DDC_ADDR,
-				.flags  = I2C_M_RD,
-				.len    = count,
-				.buf    = buf,
-			}
-		};
-
-		r = i2c_transfer(adapter, msgs, 2);
-		if (r == 2)
-			return 0;
-
-		if (r != -EAGAIN)
-			break;
-	}
-
-	return r < 0 ? r : -EIO;
-}
-
-static int tfp410_read_edid(struct omap_dss_device *dssdev,
-		u8 *edid, int len)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-	int r, l, bytes_read;
-
-	mutex_lock(&ddata->lock);
-
-	if (!ddata->i2c_adapter) {
-		r = -ENODEV;
-		goto err;
-	}
-
-	l = min(EDID_LENGTH, len);
-	r = tfp410_ddc_read(ddata->i2c_adapter, edid, l, 0);
-	if (r)
-		goto err;
-
-	bytes_read = l;
-
-	/* if there are extensions, read second block */
-	if (len > EDID_LENGTH && edid[0x7e] > 0) {
-		l = min(EDID_LENGTH, len - EDID_LENGTH);
-
-		r = tfp410_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
-				l, EDID_LENGTH);
-		if (r)
-			goto err;
-
-		bytes_read += l;
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	return bytes_read;
-
-err:
-	mutex_unlock(&ddata->lock);
-	return r;
-}
-
-static bool tfp410_detect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-	unsigned char out;
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	if (!ddata->i2c_adapter)
-		goto out;
-
-	r = tfp410_ddc_read(ddata->i2c_adapter, &out, 1, 0);
-
-	mutex_unlock(&ddata->lock);
-
-	return r == 0;
-
-out:
-	mutex_unlock(&ddata->lock);
-	return true;
-}
-
-static struct omap_dss_driver tfp410_driver = {
-	.probe		= tfp410_probe,
-	.remove		= __exit_p(tfp410_remove),
-
-	.enable		= tfp410_enable,
-	.disable	= tfp410_disable,
-
-	.set_timings	= tfp410_set_timings,
-	.get_timings	= tfp410_get_timings,
-	.check_timings	= tfp410_check_timings,
-
-	.read_edid	= tfp410_read_edid,
-	.detect		= tfp410_detect,
-
-	.driver         = {
-		.name   = "tfp410",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init tfp410_init(void)
-{
-	return omap_dss_register_driver(&tfp410_driver);
-}
-
-static void __exit tfp410_exit(void)
-{
-	omap_dss_unregister_driver(&tfp410_driver);
-}
-
-module_init(tfp410_init);
-module_exit(tfp410_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
deleted file mode 100644
index 7729b6fa6f97..000000000000
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/*
- * LCD panel driver for TPO TD043MTEA1
- *
- * Author: Gražvydas Ignotas <notasas@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#define TPO_R02_MODE(x)		((x) & 7)
-#define TPO_R02_MODE_800x480	7
-#define TPO_R02_NCLK_RISING	BIT(3)
-#define TPO_R02_HSYNC_HIGH	BIT(4)
-#define TPO_R02_VSYNC_HIGH	BIT(5)
-
-#define TPO_R03_NSTANDBY	BIT(0)
-#define TPO_R03_EN_CP_CLK	BIT(1)
-#define TPO_R03_EN_VGL_PUMP	BIT(2)
-#define TPO_R03_EN_PWM		BIT(3)
-#define TPO_R03_DRIVING_CAP_100	BIT(4)
-#define TPO_R03_EN_PRE_CHARGE	BIT(6)
-#define TPO_R03_SOFTWARE_CTL	BIT(7)
-
-#define TPO_R04_NFLIP_H		BIT(0)
-#define TPO_R04_NFLIP_V		BIT(1)
-#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
-#define TPO_R04_VGL_FREQ_1H	BIT(4)
-
-#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
-			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
-			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
-			TPO_R03_SOFTWARE_CTL)
-
-#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
-			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
-
-static const u16 tpo_td043_def_gamma[12] = {
-	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
-};
-
-struct tpo_td043_device {
-	struct spi_device *spi;
-	struct regulator *vcc_reg;
-	int nreset_gpio;
-	u16 gamma[12];
-	u32 mode;
-	u32 hmirror:1;
-	u32 vmirror:1;
-	u32 powered_on:1;
-	u32 spi_suspended:1;
-	u32 power_on_resume:1;
-};
-
-/* used to pass spi_device from SPI to DSS portion of the driver */
-static struct tpo_td043_device *g_tpo_td043;
-
-static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
-{
-	struct spi_message	m;
-	struct spi_transfer	xfer;
-	u16			w;
-	int			r;
-
-	spi_message_init(&m);
-
-	memset(&xfer, 0, sizeof(xfer));
-
-	w = ((u16)addr << 10) | (1 << 8) | data;
-	xfer.tx_buf = &w;
-	xfer.bits_per_word = 16;
-	xfer.len = 2;
-	spi_message_add_tail(&xfer, &m);
-
-	r = spi_sync(spi, &m);
-	if (r < 0)
-		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
-	return r;
-}
-
-static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
-{
-	u8 i, val;
-
-	/* gamma bits [9:8] */
-	for (val = i = 0; i < 4; i++)
-		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
-	tpo_td043_write(spi, 0x11, val);
-
-	for (val = i = 0; i < 4; i++)
-		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
-	tpo_td043_write(spi, 0x12, val);
-
-	for (val = i = 0; i < 4; i++)
-		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
-	tpo_td043_write(spi, 0x13, val);
-
-	/* gamma bits [7:0] */
-	for (val = i = 0; i < 12; i++)
-		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
-}
-
-static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
-{
-	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \
-		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
-	if (h)
-		reg4 &= ~TPO_R04_NFLIP_H;
-	if (v)
-		reg4 &= ~TPO_R04_NFLIP_V;
-
-	return tpo_td043_write(spi, 4, reg4);
-}
-
-static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
-
-	tpo_td043->hmirror = enable;
-	return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
-			tpo_td043->vmirror);
-}
-
-static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
-
-	return tpo_td043->hmirror;
-}
-
-static ssize_t tpo_td043_vmirror_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror);
-}
-
-static ssize_t tpo_td043_vmirror_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-	int val;
-	int ret;
-
-	ret = kstrtoint(buf, 0, &val);
-	if (ret < 0)
-		return ret;
-
-	val = !!val;
-
-	ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val);
-	if (ret < 0)
-		return ret;
-
-	tpo_td043->vmirror = val;
-
-	return count;
-}
-
-static ssize_t tpo_td043_mode_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode);
-}
-
-static ssize_t tpo_td043_mode_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-	long val;
-	int ret;
-
-	ret = kstrtol(buf, 0, &val);
-	if (ret != 0 || val & ~7)
-		return -EINVAL;
-
-	tpo_td043->mode = val;
-
-	val |= TPO_R02_NCLK_RISING;
-	tpo_td043_write(tpo_td043->spi, 2, val);
-
-	return count;
-}
-
-static ssize_t tpo_td043_gamma_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-	ssize_t len = 0;
-	int ret;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) {
-		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
-				tpo_td043->gamma[i]);
-		if (ret < 0)
-			return ret;
-		len += ret;
-	}
-	buf[len - 1] = '\n';
-
-	return len;
-}
-
-static ssize_t tpo_td043_gamma_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-	unsigned int g[12];
-	int ret;
-	int i;
-
-	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
-			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
-			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
-
-	if (ret != 12)
-		return -EINVAL;
-
-	for (i = 0; i < 12; i++)
-		tpo_td043->gamma[i] = g[i];
-
-	tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
-
-	return count;
-}
-
-static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
-		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
-		tpo_td043_mode_show, tpo_td043_mode_store);
-static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
-		tpo_td043_gamma_show, tpo_td043_gamma_store);
-
-static struct attribute *tpo_td043_attrs[] = {
-	&dev_attr_vmirror.attr,
-	&dev_attr_mode.attr,
-	&dev_attr_gamma.attr,
-	NULL,
-};
-
-static struct attribute_group tpo_td043_attr_group = {
-	.attrs = tpo_td043_attrs,
-};
-
-static const struct omap_video_timings tpo_td043_timings = {
-	.x_res		= 800,
-	.y_res		= 480,
-
-	.pixel_clock	= 36000,
-
-	.hsw		= 1,
-	.hfp		= 68,
-	.hbp		= 214,
-
-	.vsw		= 1,
-	.vfp		= 39,
-	.vbp		= 34,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-static inline struct panel_tpo_td043_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct panel_tpo_td043_data *) dssdev->data;
-}
-
-static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
-{
-	int r;
-
-	if (tpo_td043->powered_on)
-		return 0;
-
-	r = regulator_enable(tpo_td043->vcc_reg);
-	if (r != 0)
-		return r;
-
-	/* wait for panel to stabilize */
-	msleep(160);
-
-	if (gpio_is_valid(tpo_td043->nreset_gpio))
-		gpio_set_value(tpo_td043->nreset_gpio, 1);
-
-	tpo_td043_write(tpo_td043->spi, 2,
-			TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING);
-	tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL);
-	tpo_td043_write(tpo_td043->spi, 0x20, 0xf0);
-	tpo_td043_write(tpo_td043->spi, 0x21, 0xf0);
-	tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
-			tpo_td043->vmirror);
-	tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
-
-	tpo_td043->powered_on = 1;
-	return 0;
-}
-
-static void tpo_td043_power_off(struct tpo_td043_device *tpo_td043)
-{
-	if (!tpo_td043->powered_on)
-		return;
-
-	tpo_td043_write(tpo_td043->spi, 3,
-			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
-
-	if (gpio_is_valid(tpo_td043->nreset_gpio))
-		gpio_set_value(tpo_td043->nreset_gpio, 0);
-
-	/* wait for at least 2 vsyncs before cutting off power */
-	msleep(50);
-
-	tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY);
-
-	regulator_disable(tpo_td043->vcc_reg);
-
-	tpo_td043->powered_on = 0;
-}
-
-static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
-	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	/*
-	 * If we are resuming from system suspend, SPI clocks might not be
-	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
-	 */
-	if (!tpo_td043->spi_suspended) {
-		r = tpo_td043_power_on(tpo_td043);
-		if (r)
-			goto err1;
-	}
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
-err0:
-	return r;
-}
-
-static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	omapdss_dpi_display_disable(dssdev);
-
-	if (!tpo_td043->spi_suspended)
-		tpo_td043_power_off(tpo_td043);
-}
-
-static int tpo_td043_enable(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "enable\n");
-
-	return tpo_td043_enable_dss(dssdev);
-}
-
-static void tpo_td043_disable(struct omap_dss_device *dssdev)
-{
-	dev_dbg(dssdev->dev, "disable\n");
-
-	tpo_td043_disable_dss(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int tpo_td043_probe(struct omap_dss_device *dssdev)
-{
-	struct tpo_td043_device *tpo_td043 = g_tpo_td043;
-	struct panel_tpo_td043_data *pdata = get_panel_data(dssdev);
-	int ret = 0;
-
-	dev_dbg(dssdev->dev, "probe\n");
-
-	if (tpo_td043 == NULL) {
-		dev_err(dssdev->dev, "missing tpo_td043_device\n");
-		return -ENODEV;
-	}
-
-	if (!pdata)
-		return -EINVAL;
-
-	tpo_td043->nreset_gpio = pdata->nreset_gpio;
-
-	dssdev->panel.timings = tpo_td043_timings;
-	dssdev->ctrl.pixel_size = 24;
-
-	tpo_td043->mode = TPO_R02_MODE_800x480;
-	memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma));
-
-	tpo_td043->vcc_reg = regulator_get(dssdev->dev, "vcc");
-	if (IS_ERR(tpo_td043->vcc_reg)) {
-		dev_err(dssdev->dev, "failed to get LCD VCC regulator\n");
-		ret = PTR_ERR(tpo_td043->vcc_reg);
-		goto fail_regulator;
-	}
-
-	if (gpio_is_valid(tpo_td043->nreset_gpio)) {
-		ret = devm_gpio_request_one(dssdev->dev,
-				tpo_td043->nreset_gpio, GPIOF_OUT_INIT_LOW,
-				"lcd reset");
-		if (ret < 0) {
-			dev_err(dssdev->dev, "couldn't request reset GPIO\n");
-			goto fail_gpio_req;
-		}
-	}
-
-	ret = sysfs_create_group(&dssdev->dev->kobj, &tpo_td043_attr_group);
-	if (ret)
-		dev_warn(dssdev->dev, "failed to create sysfs files\n");
-
-	dev_set_drvdata(dssdev->dev, tpo_td043);
-
-	return 0;
-
-fail_gpio_req:
-	regulator_put(tpo_td043->vcc_reg);
-fail_regulator:
-	kfree(tpo_td043);
-	return ret;
-}
-
-static void tpo_td043_remove(struct omap_dss_device *dssdev)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
-
-	dev_dbg(dssdev->dev, "remove\n");
-
-	sysfs_remove_group(&dssdev->dev->kobj, &tpo_td043_attr_group);
-	regulator_put(tpo_td043->vcc_reg);
-}
-
-static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	omapdss_dpi_set_timings(dssdev, timings);
-
-	dssdev->panel.timings = *timings;
-}
-
-static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	return dpi_check_timings(dssdev, timings);
-}
-
-static struct omap_dss_driver tpo_td043_driver = {
-	.probe		= tpo_td043_probe,
-	.remove		= tpo_td043_remove,
-
-	.enable		= tpo_td043_enable,
-	.disable	= tpo_td043_disable,
-	.set_mirror	= tpo_td043_set_hmirror,
-	.get_mirror	= tpo_td043_get_hmirror,
-
-	.set_timings	= tpo_td043_set_timings,
-	.check_timings	= tpo_td043_check_timings,
-
-	.driver         = {
-		.name	= "tpo_td043mtea1_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int tpo_td043_spi_probe(struct spi_device *spi)
-{
-	struct omap_dss_device *dssdev = spi->dev.platform_data;
-	struct tpo_td043_device *tpo_td043;
-	int ret;
-
-	if (dssdev == NULL) {
-		dev_err(&spi->dev, "missing dssdev\n");
-		return -ENODEV;
-	}
-
-	if (g_tpo_td043 != NULL)
-		return -EBUSY;
-
-	spi->bits_per_word = 16;
-	spi->mode = SPI_MODE_0;
-
-	ret = spi_setup(spi);
-	if (ret < 0) {
-		dev_err(&spi->dev, "spi_setup failed: %d\n", ret);
-		return ret;
-	}
-
-	tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL);
-	if (tpo_td043 == NULL)
-		return -ENOMEM;
-
-	tpo_td043->spi = spi;
-	dev_set_drvdata(&spi->dev, tpo_td043);
-	g_tpo_td043 = tpo_td043;
-
-	omap_dss_register_driver(&tpo_td043_driver);
-
-	return 0;
-}
-
-static int tpo_td043_spi_remove(struct spi_device *spi)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev);
-
-	omap_dss_unregister_driver(&tpo_td043_driver);
-	kfree(tpo_td043);
-	g_tpo_td043 = NULL;
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int tpo_td043_spi_suspend(struct device *dev)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", tpo_td043);
-
-	tpo_td043->power_on_resume = tpo_td043->powered_on;
-	tpo_td043_power_off(tpo_td043);
-	tpo_td043->spi_suspended = 1;
-
-	return 0;
-}
-
-static int tpo_td043_spi_resume(struct device *dev)
-{
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-	int ret;
-
-	dev_dbg(dev, "tpo_td043_spi_resume\n");
-
-	if (tpo_td043->power_on_resume) {
-		ret = tpo_td043_power_on(tpo_td043);
-		if (ret)
-			return ret;
-	}
-	tpo_td043->spi_suspended = 0;
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
-	tpo_td043_spi_suspend, tpo_td043_spi_resume);
-
-static struct spi_driver tpo_td043_spi_driver = {
-	.driver = {
-		.name	= "tpo_td043mtea1_panel_spi",
-		.owner	= THIS_MODULE,
-		.pm	= &tpo_td043_spi_pm,
-	},
-	.probe	= tpo_td043_spi_probe,
-	.remove	= tpo_td043_spi_remove,
-};
-
-module_spi_driver(tpo_td043_spi_driver);
-
-MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
-MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
-MODULE_LICENSE("GPL");
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index 6b2366fb6e53..f7ac8d972af0 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -32,124 +32,6 @@
 
 struct omap_dss_device;
 
-/**
- * struct panel_generic_dpi_data - panel driver configuration data
- * @name: panel name
- * @platform_enable: platform specific panel enable function
- * @platform_disable: platform specific panel disable function
- * @num_gpios: number of gpios connected to panel
- * @gpios: gpio numbers on the platform
- * @gpio_invert: configure gpio as active high or low
- */
-struct panel_generic_dpi_data {
-	const char *name;
-	int (*platform_enable)(struct omap_dss_device *dssdev);
-	void (*platform_disable)(struct omap_dss_device *dssdev);
-
-	int num_gpios;
-	int gpios[10];
-	bool gpio_invert[10];
-};
-
-/**
- * struct panel_n8x0_data - N800 panel driver configuration data
- */
-struct panel_n8x0_data {
-	int (*platform_enable)(struct omap_dss_device *dssdev);
-	void (*platform_disable)(struct omap_dss_device *dssdev);
-	int panel_reset;
-	int ctrl_pwrdown;
-};
-
-/**
- * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration data
- * @name: panel name
- * @use_ext_te: use external TE
- * @ext_te_gpio: external TE GPIO
- * @esd_interval: interval of ESD checks, 0 = disabled (ms)
- * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
- * @use_dsi_backlight: true if panel uses DSI command to control backlight
- * @pin_config: DSI pin configuration
- */
-
-struct nokia_dsi_panel_data {
-	const char *name;
-
-	int reset_gpio;
-
-	bool use_ext_te;
-	int ext_te_gpio;
-
-	unsigned esd_interval;
-	unsigned ulps_timeout;
-
-	bool use_dsi_backlight;
-
-	struct omap_dsi_pin_config pin_config;
-};
-
-/**
- * struct picodlp_panel_data - picodlp panel driver configuration data
- * @picodlp_adapter_id:	i2c_adapter number for picodlp
- */
-struct picodlp_panel_data {
-	int picodlp_adapter_id;
-	int emu_done_gpio;
-	int pwrgood_gpio;
-};
-
-/**
- * struct tfp410_platform_data - tfp410 panel driver configuration data
- * @i2c_bus_num: i2c bus id for the panel
- * @power_down_gpio: gpio number for PD pin (or -1 if not available)
- */
-struct tfp410_platform_data {
-	int i2c_bus_num;
-	int power_down_gpio;
-};
-
-/**
- * sharp ls panel driver configuration data
- * @resb_gpio: reset signal
- * @ini_gpio: power on control
- * @mo_gpio: selection for resolution(VGA/QVGA)
- * @lr_gpio: selection for horizontal scanning direction
- * @ud_gpio: selection for vertical scanning direction
- */
-struct panel_sharp_ls037v7dw01_data {
-	int resb_gpio;
-	int ini_gpio;
-	int mo_gpio;
-	int lr_gpio;
-	int ud_gpio;
-};
-
-/**
- * acx565akm panel driver configuration data
- * @reset_gpio: reset signal
- */
-struct panel_acx565akm_data {
-	int reset_gpio;
-};
-
-/**
- * nec nl8048 panel driver configuration data
- * @res_gpio: reset signal
- * @qvga_gpio: selection for resolution(QVGA/WVGA)
- */
-struct panel_nec_nl8048_data {
-	int res_gpio;
-	int qvga_gpio;
-};
-
-/**
- * tpo td043 panel driver configuration data
- * @nreset_gpio: reset signal
- */
-struct panel_tpo_td043_data {
-	int nreset_gpio;
-};
-
 /**
  * encoder_tfp410 platform data
  * @name: name for this display entity