ARM: S5PV210: Add support for M-5MOLS image sensor on UNIVERSAL_C210
Add voltage regulator definitions for M-5MOLS camera, platform data definition for the sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC and CSIS devices. Define required I2C0 bus timings. Setup camera port A GPIO. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Sylwester Nawrocki
Kukjin Kim
parent
39aefabbc8
commit
0513218222
2 changed files with 201 additions and 8 deletions
|
|
@ -179,6 +179,7 @@ config MACH_UNIVERSAL_C210
|
|||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_CSIS0
|
||||
select S5P_DEV_FIMD0
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC2
|
||||
|
|
@ -196,6 +197,8 @@ config MACH_UNIVERSAL_C210
|
|||
select EXYNOS4_SETUP_I2C3
|
||||
select EXYNOS4_SETUP_I2C5
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_FIMC
|
||||
select S5P_SETUP_MIPIPHY
|
||||
help
|
||||
Machine support for Samsung Mobile Universal S5PC210 Reference
|
||||
Board.
|
||||
|
|
|
|||
|
|
@ -37,9 +37,16 @@
|
|||
#include <plat/sdhci.h>
|
||||
#include <plat/pd.h>
|
||||
#include <plat/regs-fb-v4.h>
|
||||
#include <plat/fimc-core.h>
|
||||
#include <plat/camport.h>
|
||||
#include <plat/mipi_csis.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
|
||||
#include <media/v4l2-mediabus.h>
|
||||
#include <media/s5p_fimc.h>
|
||||
#include <media/m5mols.h>
|
||||
|
||||
/* Following are default values for UCON, ULCON and UFCON UART registers */
|
||||
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
|
||||
S3C2410_UCON_RXILEVEL | \
|
||||
|
|
@ -192,6 +199,7 @@ static struct regulator_init_data lp3974_ldo2_data = {
|
|||
static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
|
||||
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
|
||||
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
|
||||
REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
|
||||
};
|
||||
|
||||
static struct regulator_init_data lp3974_ldo3_data = {
|
||||
|
|
@ -254,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
|
||||
REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
|
||||
};
|
||||
|
||||
static struct regulator_init_data lp3974_ldo7_data = {
|
||||
.constraints = {
|
||||
.name = "VLCD+VMIPI_1.8V",
|
||||
|
|
@ -265,6 +277,8 @@ static struct regulator_init_data lp3974_ldo7_data = {
|
|||
.disabled = 1,
|
||||
},
|
||||
},
|
||||
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
|
||||
.consumer_supplies = lp3974_ldo7_consumer,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
|
||||
|
|
@ -313,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply lp3974_ldo11_consumer =
|
||||
REGULATOR_SUPPLY("dig_28", "0-001f");
|
||||
|
||||
static struct regulator_init_data lp3974_ldo11_data = {
|
||||
.constraints = {
|
||||
.name = "CAM_AF_3.3V",
|
||||
|
|
@ -324,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = {
|
|||
.disabled = 1,
|
||||
},
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &lp3974_ldo11_consumer,
|
||||
};
|
||||
|
||||
static struct regulator_init_data lp3974_ldo12_data = {
|
||||
|
|
@ -352,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply lp3974_ldo14_consumer =
|
||||
REGULATOR_SUPPLY("dig_18", "0-001f");
|
||||
|
||||
static struct regulator_init_data lp3974_ldo14_data = {
|
||||
.constraints = {
|
||||
.name = "CAM_I_HOST_1.8V",
|
||||
|
|
@ -363,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = {
|
|||
.disabled = 1,
|
||||
},
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &lp3974_ldo14_consumer,
|
||||
};
|
||||
|
||||
|
||||
static struct regulator_consumer_supply lp3974_ldo15_consumer =
|
||||
REGULATOR_SUPPLY("dig_12", "0-001f");
|
||||
|
||||
static struct regulator_init_data lp3974_ldo15_data = {
|
||||
.constraints = {
|
||||
.name = "CAM_S_DIG+FM33_CORE_1.2V",
|
||||
|
|
@ -376,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = {
|
|||
.disabled = 1,
|
||||
},
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &lp3974_ldo15_consumer,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
|
||||
REGULATOR_SUPPLY("a_sensor", "0-001f"),
|
||||
};
|
||||
|
||||
static struct regulator_init_data lp3974_ldo16_data = {
|
||||
|
|
@ -389,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = {
|
|||
.disabled = 1,
|
||||
},
|
||||
},
|
||||
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
|
||||
.consumer_supplies = lp3974_ldo16_consumer,
|
||||
};
|
||||
|
||||
static struct regulator_init_data lp3974_ldo17_data = {
|
||||
|
|
@ -499,6 +535,15 @@ static struct max8998_platform_data universal_lp3974_pdata = {
|
|||
.wakeup = true,
|
||||
};
|
||||
|
||||
|
||||
enum fixed_regulator_id {
|
||||
FIXED_REG_ID_MMC0,
|
||||
FIXED_REG_ID_HDMI_5V,
|
||||
FIXED_REG_ID_CAM_S_IF,
|
||||
FIXED_REG_ID_CAM_I_CORE,
|
||||
FIXED_REG_ID_CAM_VT_DIO,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply hdmi_fixed_consumer =
|
||||
REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
|
||||
|
||||
|
|
@ -521,7 +566,7 @@ static struct fixed_voltage_config hdmi_fixed_voltage_config = {
|
|||
|
||||
static struct platform_device hdmi_fixed_voltage = {
|
||||
.name = "reg-fixed-voltage",
|
||||
.id = 6,
|
||||
.id = FIXED_REG_ID_HDMI_5V,
|
||||
.dev = {
|
||||
.platform_data = &hdmi_fixed_voltage_config,
|
||||
},
|
||||
|
|
@ -628,6 +673,11 @@ static void __init universal_touchkey_init(void)
|
|||
gpio_direction_output(gpio, 1);
|
||||
}
|
||||
|
||||
static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
|
||||
.frequency = 300 * 1000,
|
||||
.sda_delay = 200,
|
||||
};
|
||||
|
||||
/* GPIO KEYS */
|
||||
static struct gpio_keys_button universal_gpio_keys_tables[] = {
|
||||
{
|
||||
|
|
@ -713,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = {
|
|||
|
||||
static struct platform_device mmc0_fixed_voltage = {
|
||||
.name = "reg-fixed-voltage",
|
||||
.id = 0,
|
||||
.id = FIXED_REG_ID_MMC0,
|
||||
.dev = {
|
||||
.platform_data = &mmc0_fixed_voltage_config,
|
||||
},
|
||||
|
|
@ -747,11 +797,6 @@ static void __init universal_sdhci_init(void)
|
|||
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
|
||||
}
|
||||
|
||||
/* I2C0 */
|
||||
static struct i2c_board_info i2c0_devs[] __initdata = {
|
||||
/* Camera, To be updated */
|
||||
};
|
||||
|
||||
/* I2C1 */
|
||||
static struct i2c_board_info i2c1_devs[] __initdata = {
|
||||
/* Gyro, To be updated */
|
||||
|
|
@ -783,8 +828,139 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
|
|||
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply cam_i_core_supply =
|
||||
REGULATOR_SUPPLY("core", "0-001f");
|
||||
|
||||
static struct regulator_init_data cam_i_core_reg_init_data = {
|
||||
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &cam_i_core_supply,
|
||||
};
|
||||
|
||||
static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
|
||||
.supply_name = "CAM_I_CORE_1.2V",
|
||||
.microvolts = 1200000,
|
||||
.gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
|
||||
.enable_high = 1,
|
||||
.init_data = &cam_i_core_reg_init_data,
|
||||
};
|
||||
|
||||
static struct platform_device cam_i_core_fixed_reg_dev = {
|
||||
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
|
||||
.dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply cam_s_if_supply =
|
||||
REGULATOR_SUPPLY("d_sensor", "0-001f");
|
||||
|
||||
static struct regulator_init_data cam_s_if_reg_init_data = {
|
||||
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &cam_s_if_supply,
|
||||
};
|
||||
|
||||
static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
|
||||
.supply_name = "CAM_S_IF_1.8V",
|
||||
.microvolts = 1800000,
|
||||
.gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
|
||||
.enable_high = 1,
|
||||
.init_data = &cam_s_if_reg_init_data,
|
||||
};
|
||||
|
||||
static struct platform_device cam_s_if_fixed_reg_dev = {
|
||||
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
|
||||
.dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
|
||||
};
|
||||
|
||||
static struct s5p_platform_mipi_csis mipi_csis_platdata = {
|
||||
.clk_rate = 166000000UL,
|
||||
.lanes = 2,
|
||||
.alignment = 32,
|
||||
.hs_settle = 12,
|
||||
.phy_enable = s5p_csis_phy_enable,
|
||||
};
|
||||
|
||||
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
|
||||
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
|
||||
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
|
||||
|
||||
static int m5mols_set_power(struct device *dev, int on)
|
||||
{
|
||||
gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
|
||||
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct m5mols_platform_data m5mols_platdata = {
|
||||
.gpio_reset = GPIO_CAM_MEGA_nRST,
|
||||
.reset_polarity = 0,
|
||||
.set_power = m5mols_set_power,
|
||||
};
|
||||
|
||||
static struct i2c_board_info m5mols_board_info = {
|
||||
I2C_BOARD_INFO("M5MOLS", 0x1F),
|
||||
.platform_data = &m5mols_platdata,
|
||||
};
|
||||
|
||||
static struct s5p_fimc_isp_info universal_camera_sensors[] = {
|
||||
{
|
||||
.mux_id = 0,
|
||||
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
|
||||
V4L2_MBUS_VSYNC_ACTIVE_LOW,
|
||||
.bus_type = FIMC_MIPI_CSI2,
|
||||
.board_info = &m5mols_board_info,
|
||||
.i2c_bus_num = 0,
|
||||
.clk_frequency = 21600000UL,
|
||||
.csi_data_align = 32,
|
||||
},
|
||||
};
|
||||
|
||||
static struct s5p_platform_fimc fimc_md_platdata = {
|
||||
.isp_info = universal_camera_sensors,
|
||||
.num_clients = ARRAY_SIZE(universal_camera_sensors),
|
||||
};
|
||||
|
||||
struct platform_device s5p_device_fimc_md = {
|
||||
.name = "s5p-fimc-md",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
static struct gpio universal_camera_gpios[] = {
|
||||
{ GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
|
||||
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
|
||||
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
|
||||
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
|
||||
};
|
||||
|
||||
static void universal_camera_init(void)
|
||||
{
|
||||
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
|
||||
&s5p_device_mipi_csis0);
|
||||
s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
|
||||
&s5p_device_fimc_md);
|
||||
|
||||
if (gpio_request_array(universal_camera_gpios,
|
||||
ARRAY_SIZE(universal_camera_gpios))) {
|
||||
pr_err("%s: GPIO request failed\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
|
||||
m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
|
||||
else
|
||||
pr_err("Failed to configure 8M_ISP_INT GPIO\n");
|
||||
|
||||
/* Free GPIOs controlled directly by the sensor drivers. */
|
||||
gpio_free(GPIO_CAM_MEGA_nRST);
|
||||
gpio_free(GPIO_CAM_8M_ISP_INT);
|
||||
|
||||
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
|
||||
pr_err("Camera port A setup failed\n");
|
||||
}
|
||||
|
||||
static struct platform_device *universal_devices[] __initdata = {
|
||||
/* Samsung Platform Devices */
|
||||
&s5p_device_mipi_csis0,
|
||||
&s5p_device_fimc0,
|
||||
&s5p_device_fimc1,
|
||||
&s5p_device_fimc2,
|
||||
|
|
@ -793,6 +969,7 @@ static struct platform_device *universal_devices[] __initdata = {
|
|||
&s3c_device_hsmmc0,
|
||||
&s3c_device_hsmmc2,
|
||||
&s3c_device_hsmmc3,
|
||||
&s3c_device_i2c0,
|
||||
&s3c_device_i2c3,
|
||||
&s3c_device_i2c5,
|
||||
&s5p_device_i2c_hdmiphy,
|
||||
|
|
@ -812,6 +989,10 @@ static struct platform_device *universal_devices[] __initdata = {
|
|||
&s5p_device_mfc_r,
|
||||
&exynos4_device_pd[PD_MFC],
|
||||
&exynos4_device_pd[PD_LCD0],
|
||||
&exynos4_device_pd[PD_CAM],
|
||||
&cam_i_core_fixed_reg_dev,
|
||||
&cam_s_if_fixed_reg_dev,
|
||||
&s5p_device_fimc_md,
|
||||
};
|
||||
|
||||
static void __init universal_map_io(void)
|
||||
|
|
@ -845,7 +1026,7 @@ static void __init universal_machine_init(void)
|
|||
universal_sdhci_init();
|
||||
s5p_tv_setup();
|
||||
|
||||
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
|
||||
s3c_i2c0_set_platdata(&universal_i2c0_platdata);
|
||||
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
|
||||
|
||||
universal_tsp_init();
|
||||
|
|
@ -862,10 +1043,19 @@ static void __init universal_machine_init(void)
|
|||
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
|
||||
ARRAY_SIZE(i2c_gpio12_devs));
|
||||
|
||||
universal_camera_init();
|
||||
|
||||
/* Last */
|
||||
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
|
||||
|
||||
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
|
||||
s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
|
||||
|
||||
s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
|
||||
s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
|
||||
s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
|
||||
s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
|
||||
s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
|
||||
}
|
||||
|
||||
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
|
||||
|
|
|
|||
Loading…
Reference in a new issue