diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
index 9e7a2417dac5..7f150b5012cc 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
@@ -17,9 +17,20 @@ Recommended properties:
contains a functioning "reset control register" (i.e. the board
is wired to reset upon setting the HRESET_REQ bit in this register).
-Example:
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+ registers, for those SOCs that have a PAMU device.
+
+Examples:
global-utilities@e0000 { /* global utilities block */
compatible = "fsl,mpc8548-guts";
reg = <e0000 1000>;
fsl,has-rstcr;
};
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
new file mode 100644
index 000000000000..1f5e329f756c
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -0,0 +1,140 @@
+Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding
+
+DESCRIPTION
+
+The PAMU is an I/O MMU that provides device-to-memory access control and
+address translation capabilities.
+
+Required properties:
+
+- compatible : <string>
+ First entry is a version-specific string, such as
+ "fsl,pamu-v1.0". The second is "fsl,pamu".
+- ranges : <prop-encoded-array>
+ A standard property. Utilized to describe the memory mapped
+ I/O space utilized by the controller. The size should
+ be set to the total size of the register space of all
+ physically present PAMU controllers. For example, for
+ PAMU v1.0, on an SOC that has five PAMU devices, the size
+ is 0x5000.
+- interrupts : <prop-encoded-array>
+ Interrupt mappings. The first tuple is the normal PAMU
+ interrupt, used for reporting access violations. The second
+ is for PAMU hardware errors, such as PAMU operation errors
+ and ECC errors.
+- #address-cells: <u32>
+ A standard property.
+- #size-cells : <u32>
+ A standard property.
+
+Optional properties:
+- reg : <prop-encoded-array>
+ A standard property. It represents the CCSR registers of
+ all child PAMUs combined. Include it to provide support
+ for legacy drivers.
+- interrupt-parent : <phandle>
+ Phandle to interrupt controller
+
+Child nodes:
+
+Each child node represents one PAMU controller. Each SOC device that is
+connected to a specific PAMU device should have a "fsl,pamu-phandle" property
+that links to the corresponding specific child PAMU controller.
+
+- reg : <prop-encoded-array>
+ A standard property. Specifies the physical address and
+ length (relative to the parent 'ranges' property) of this
+ PAMU controller's configuration registers. The size should
+ be set to the size of this PAMU controllers's register space.
+ For PAMU v1.0, this size is 0x1000.
+- fsl,primary-cache-geometry
+ : <prop-encoded-array>
+ Two cells that specify the geometry of the primary PAMU
+ cache. The first is the number of cache lines, and the
+ second is the number of "ways". For direct-mapped caches,
+ specify a value of 1.
+- fsl,secondary-cache-geometry
+ : <prop-encoded-array>
+ Two cells that specify the geometry of the secondary PAMU
+ cache. The first is the number of cache lines, and the
+ second is the number of "ways". For direct-mapped caches,
+ specify a value of 1.
+
+Device nodes:
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+ : <phandle>
+ Phandle to the single, specific PAMU controller node to which
+ this device is connect. The PAMU topology is represented in
+ the device tree to assist code that dynamically determines the
+ best LIODN values to minimize PAMU cache thrashing.
+
+- fsl,liodn-reg : <prop-encoded-array>
+ Two cells that specify the location of the LIODN register
+ for this device. Required for devices that have a single
+ LIODN. The first cell is a phandle to a node that contains
+ the registers where the LIODN is to be set. The second is
+ the offset from the first "reg" resource of the node where
+ the specific LIODN register is located.
+
+
+Example:
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ ranges = <0 0x20000 0x5000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu4: pamu@4000 {
+ reg = <0x4000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+ };
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 531eab82c6c9..69ac1acd4349 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -125,18 +131,21 @@
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -246,10 +255,37 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
+ reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -291,7 +327,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -299,6 +345,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -308,20 +356,37 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ phy_type = "utmi";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+
/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index af4ebc8009e3..9b5a81a4529c 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -152,18 +158,21 @@
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -273,10 +282,37 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
+ reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -318,7 +354,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -326,6 +372,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -335,20 +383,37 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
+ phy_type = "utmi";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+
/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 4f9c9f682ecf..dc82bcfa2f61 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -126,18 +132,21 @@
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -281,13 +290,51 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
+ reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x5000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu4: pamu@4000 {
+ reg = <0x4000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-rmu-0.dtsi"
+ rmu@d3000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */
+ };
+
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
@@ -327,7 +374,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -335,6 +392,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
voltage-ranges = <3300 3300>;
sdhci,auto-cmd12;
};
@@ -347,11 +406,18 @@
/include/ "qoriq-usb2-mph-0.dtsi"
usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
};
/include/ "qoriq-sec4.0-0.dtsi"
+crypto: crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 5d7205b7bb05..9ea77c3513f6 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -129,6 +135,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 12>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -152,18 +160,21 @@
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -276,10 +287,37 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
+ reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -321,7 +359,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -329,6 +377,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -338,21 +388,41 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
/include/ "qoriq-sec4.2-0.dtsi"
+ crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
+
/include/ "qoriq-raid1.0-0.dtsi"
+ raideng@320000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index db2c9a7b3a0e..97f8c26f9709 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -48,6 +48,7 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +76,7 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +104,7 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -239,10 +242,42 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
+ reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x5000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <24 2 0 0
+ 16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu4: pamu@4000 {
+ reg = <0x4000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -284,7 +319,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -292,6 +337,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu2>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -301,20 +348,37 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+
/include/ "qoriq-sec5.2-0.dtsi"
+ crypto@300000 {
+ fsl,iommu-parent = <&pamu4>;
+ };
};