Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits)
  microblaze: Don't use access_ok for unaligned
  microblaze: remove unused flat_stack_align() definition
  microblaze: Fix problem with early_printk in startup
  microblaze_mmu_v2: Makefiles
  microblaze_mmu_v2: Kconfig update
  microblaze_mmu_v2: stat.h MMU update
  microblaze_mmu_v2: Elf update
  microblaze_mmu_v2: Update dma.h for MMU
  microblaze_mmu_v2: Update cacheflush.h
  microblaze_mmu_v2: Update signal returning address
  microblaze_mmu_v2: Traps MMU update
  microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU
  microblaze_mmu_v2: Update linker script for MMU
  microblaze_mmu_v2: Add MMU related exceptions handling
  microblaze_mmu_v2: uaccess MMU update
  microblaze_mmu_v2: Update exception handling - MMU exception
  microblaze_mmu_v2: entry.S, entry.h
  microblaze_mmu_v2: Add CURRENT_TASK for entry.S
  microblaze_mmu_v2: MMU asm offset update
  microblaze_mmu_v2: Update tlb.h and tlbflush.h
  ...

arch/microblaze/Kconfig

@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config SWAP
 	def_bool n
@@ -49,13 +50,14 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config PCI
-	depends on !MMU
 	def_bool n
 
 config NO_DMA
-	depends on !MMU
+	def_bool y
-	def_bool n
 
 source "init/Kconfig"
 
@@ -72,7 +74,8 @@ source "kernel/Kconfig.preempt"
 source "kernel/Kconfig.hz"
 
 config MMU
-	def_bool n
+	bool "MMU support"
+	default n
 
 config NO_MMU
 	bool
@@ -105,9 +108,6 @@ config CMDLINE_FORCE
 config OF
 	def_bool y
 
-config OF_DEVICE
-	def_bool y
-
 config PROC_DEVICETREE
 	bool "Support for device tree in /proc"
 	depends on PROC_FS
@@ -118,6 +118,113 @@ config PROC_DEVICETREE
 
 endmenu
 
+menu "Advanced setup"
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	depends on MMU
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config HIGHMEM_START_BOOL
+	bool "Set high memory pool address"
+	depends on ADVANCED_OPTIONS && HIGHMEM
+	help
+	  This option allows you to set the base address of the kernel virtual
+	  area used to map high memory pages.  This can be useful in
+	  optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config HIGHMEM_START
+	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
+	depends on MMU
+	default "0xfe000000"
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	depends on MMU
+	default "0x30000000"
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory (the kernel image will be linked at
+	  this address).  This can be useful in optimizing the virtual memory
+	  layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default "0xc0000000" if MMU
+	default KERNEL_BASE_ADDR if !MMU
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	depends on MMU
+	default "0x80000000"
+
+config CONSISTENT_START_BOOL
+	bool "Set custom consistent memory pool address"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the base virtual address
+	  of the the consistent memory pool.  This pool of virtual
+	  memory is used to make consistent memory allocations.
+
+config CONSISTENT_START
+	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+	depends on MMU
+	default "0xff100000" if NOT_COHERENT_CACHE
+
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	depends on MMU
+	default "0x00200000" if NOT_COHERENT_CACHE
+
+endmenu
+
 source "mm/Kconfig"
 
 menu "Exectuable file formats"

arch/microblaze/Makefile

@@ -1,4 +1,8 @@
+ifeq ($(CONFIG_MMU),y)
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
 UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
@@ -36,6 +40,8 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 # r31 holds current when in kernel mode
 CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
+LDFLAGS		:=
+LDFLAGS_vmlinux	:=
 LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
 LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)

arch/microblaze/boot/Makefile

@@ -7,6 +7,8 @@ targets := linux.bin linux.bin.gz
 OBJCOPYFLAGS_linux.bin  := -O binary
 
 $(obj)/linux.bin: vmlinux FORCE
+	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
+	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 

arch/microblaze/configs/mmu_defconfig

@@ -0,0 +1,798 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Fri May 22 10:02:33 2009
+#
+CONFIG_MICROBLAZE=y
+# CONFIG_SWAP is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform options
+#
+CONFIG_PLATFORM_GENERIC=y
+CONFIG_OPT_LIB_FUNCTION=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_ALLOW_EDIT_AUTO=y
+
+#
+# Automatic platform settings from Kconfig.auto
+#
+
+#
+# Definitions for MICROBLAZE0
+#
+CONFIG_KERNEL_BASE_ADDR=0x90000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
+
+#
+# Processor type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_MMU=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_OF=y
+CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Exectuable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_HEART_BEAT=y
+CONFIG_DEBUG_BOOTMEM=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y

arch/microblaze/include/asm/Kbuild

@@ -1,26 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += auxvec.h
+header-y  += elf.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += linkage.h
-header-y += msgbuf.h
-header-y += poll.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += statfs.h
-header-y += stat.h
-header-y += termbits.h
-header-y += ucontext.h
-
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += termios.h

arch/microblaze/include/asm/cacheflush.h

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007 PetaLogix
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
  * based on v850 version which was
  * Copyright (C) 2001,02,03 NEC Electronics Corporation
@@ -43,6 +44,23 @@
 #define flush_icache_range(start, len)	__invalidate_icache_range(start, len)
 #define flush_icache_page(vma, pg)		do { } while (0)
 
+#ifndef CONFIG_MMU
+# define flush_icache_user_range(start, len)	do { } while (0)
+#else
+# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all()
+
+# define flush_page_to_ram(page)		do { } while (0)
+
+# define flush_icache()			__invalidate_icache_all()
+# define flush_cache_sigtramp(vaddr) \
+			__invalidate_icache_range(vaddr, vaddr + 8)
+
+# define flush_dcache_mmap_lock(mapping)	do { } while (0)
+# define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+# define flush_cache_dup_mm(mm)			do { } while (0)
+#endif
+
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 

arch/microblaze/include/asm/checksum.h

@@ -51,7 +51,8 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+								__wsum sum);
 
 /*
  * the same as csum_partial_copy, but copies from user space.
@@ -59,8 +60,8 @@ extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					int len, int sum, int *csum_err);
+					int len, __wsum sum, int *csum_err);
 
 #define csum_partial_copy_nocheck(src, dst, len, sum)	\
 	csum_partial_copy((src), (dst), (len), (sum))
@@ -75,11 +76,12 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
 /*
  *	Fold a partial checksum
  */
-static inline __sum16 csum_fold(unsigned int sum)
+static inline __sum16 csum_fold(__wsum csum)
 {
+	u32 sum = (__force u32)csum;
 	sum = (sum & 0xffff) + (sum >> 16);
 	sum = (sum & 0xffff) + (sum >> 16);
-	return ~sum;
+	return (__force __sum16)~sum;
 }
 
 static inline __sum16
@@ -93,6 +95,6 @@ csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
+extern __sum16 ip_compute_csum(const void *buff, int len);
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */

arch/microblaze/include/asm/current.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,12 @@
 #ifndef _ASM_MICROBLAZE_CURRENT_H
 #define _ASM_MICROBLAZE_CURRENT_H
 
+/*
+ * Register used to hold the current task pointer while in the kernel.
+ * Any `call clobbered' register without a special meaning should be OK,
+ * but check asm/microblaze/kernel/entry.S to be sure.
+ */
+#define CURRENT_TASK	r31
 # ifndef __ASSEMBLY__
 /*
  * Dedicate r31 to keeping the current task pointer

arch/microblaze/include/asm/dma-mapping.h

@@ -1,129 +1 @@
-/*
+#include <asm-generic/dma-mapping-broken.h>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
-#define _ASM_MICROBLAZE_DMA_MAPPING_H
-
-#include <asm/cacheflush.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-struct scatterlist;
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-/* FIXME */
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	enum dma_data_direction direction)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-		enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-		enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, int flag)
-{
-	return NULL; /* consistent_alloc(flag, size, dma_handle); */
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-			void *vaddr, dma_addr_t dma_handle)
-{
-	BUG();
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	switch (direction) {
-	case DMA_FROM_DEVICE:
-		flush_dcache_range((unsigned)dma_addr,
-			(unsigned)dma_addr + size);
-			/* Fall through */
-	case DMA_TO_DEVICE:
-		break;
-	default:
-		BUG();
-	}
-}
-
-#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */

arch/microblaze/include/asm/dma.h

@@ -9,8 +9,13 @@
 #ifndef _ASM_MICROBLAZE_DMA_H
 #define _ASM_MICROBLAZE_DMA_H
 
+#ifndef CONFIG_MMU
 /* we don't have dma address limit. define it as zero to be
  * unlimited. */
 #define MAX_DMA_ADDRESS		(0)
+#else
+/* Virtual address corresponding to last available physical memory address.  */
+#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
+#endif
 
 #endif /* _ASM_MICROBLAZE_DMA_H */

arch/microblaze/include/asm/elf.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -27,4 +29,95 @@
  */
 #define ELF_CLASS	ELFCLASS32
 
+#ifndef __uClinux__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/byteorder.h>
+
+#ifndef ELF_GREG_T
+#define ELF_GREG_T
+typedef unsigned long elf_greg_t;
+#endif
+
+#ifndef ELF_NGREG
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+#endif
+
+#ifndef ELF_GREGSET_T
+#define ELF_GREGSET_T
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#endif
+
+#ifndef ELF_FPREGSET_T
+#define ELF_FPREGSET_T
+
+/* TBD */
+#define ELF_NFPREG	33	/* includes fsr */
+typedef unsigned long elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* typedef struct user_fpu_struct elf_fpregset_t; */
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+
+#define ELF_CORE_COPY_REGS(_dest, _regs)			\
+	memcpy((char *) &_dest, (char *) _regs,		\
+	sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+/* Added _f parameter. Is this definition correct: TBD */
+#define ELF_PLAT_INIT(_r, _f)				\
+do {							\
+	_r->r1 =  _r->r1 =  _r->r2 =  _r->r3 =		\
+	_r->r4 =  _r->r5 =  _r->r6 =  _r->r7 =		\
+	_r->r8 =  _r->r9 =  _r->r10 = _r->r11 =		\
+	_r->r12 = _r->r13 = _r->r14 = _r->r15 =		\
+	_r->r16 = _r->r17 = _r->r18 = _r->r19 =		\
+	_r->r20 = _r->r21 = _r->r22 = _r->r23 =		\
+	_r->r24 = _r->r25 = _r->r26 = _r->r27 =		\
+	_r->r28 = _r->r29 = _r->r30 = _r->r31 =		\
+	0;						\
+} while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __uClinux__ */
+
 #endif /* _ASM_MICROBLAZE_ELF_H */

arch/microblaze/include/asm/entry.h

@@ -1,8 +1,8 @@
 /*
  * Definitions used by low-level trap handlers
  *
- * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2007 - 2008 PetaLogix
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -31,7 +31,40 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
 # endif /* __ASSEMBLY__ */
 
+#ifndef CONFIG_MMU
+
 /* noMMU hasn't any space for args */
 # define STATE_SAVE_ARG_SPACE	(0)
 
+#else /* CONFIG_MMU */
+
+/* If true, system calls save and restore all registers (except result
+ * registers, of course).  If false, then `call clobbered' registers
+ * will not be preserved, on the theory that system calls are basically
+ * function calls anyway, and the caller should be able to deal with it.
+ * This is a security risk, of course, as `internal' values may leak out
+ * after a system call, but that certainly doesn't matter very much for
+ * a processor with no MMU protection!  For a protected-mode kernel, it
+ * would be faster to just zero those registers before returning.
+ *
+ * I can not rely on the glibc implementation. If you turn it off make
+ * sure that r11/r12 is saved in user-space. --KAA
+ *
+ * These are special variables using by the kernel trap/interrupt code
+ * to save registers in, at a time when there are no spare registers we
+ * can use to do so, and we can't depend on the value of the stack
+ * pointer.  This means that they must be within a signed 16-bit
+ * displacement of 0x00000000.
+ */
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+ * suitable for a function call stack frame. */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+ * C calling conventions, in addition to the space used by the struct
+ * pt_regs that actually holds saved values. */
+#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments */
+
+#endif /* CONFIG_MMU */
+
 #endif /* _ASM_MICROBLAZE_ENTRY_H */

arch/microblaze/include/asm/exceptions.h

@@ -1,8 +1,8 @@
 /*
  * Preliminary support for HW exception handing for Microblaze
  *
- * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -64,21 +64,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#if defined(CONFIG_XMON)
+#ifdef CONFIG_MMU
-extern void xmon(struct pt_regs *regs);
+void __bug(const char *file, int line, void *data);
-extern int xmon_bpt(struct pt_regs *regs);
+int bad_trap(int trap_num, struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
+int debug_trap(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
+#endif /* CONFIG_MMU */
-extern int xmon_dabr_match(struct pt_regs *regs);
-extern void (*xmon_fault_handler)(struct pt_regs *regs);
 
-void (*debugger)(struct pt_regs *regs) = xmon;
+#if defined(CONFIG_KGDB)
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#elif defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);
 int (*debugger_sstep)(struct pt_regs *regs);

arch/microblaze/include/asm/flat.h

@@ -13,7 +13,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp) /* nothing needed */
 #define	flat_argvp_envp_on_stack()	0
 #define	flat_old_ram_flag(flags)	(flags)
 #define	flat_reloc_valid(reloc, size)	((reloc) <= (size))

arch/microblaze/include/asm/gpio.h

@@ -11,8 +11,8 @@
  * (at your option) any later version.
  */
 
-#ifndef __ASM_POWERPC_GPIO_H
+#ifndef _ASM_MICROBLAZE_GPIO_H
-#define __ASM_POWERPC_GPIO_H
+#define _ASM_MICROBLAZE_GPIO_H
 
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
@@ -53,4 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* CONFIG_GPIOLIB */
 
-#endif /* __ASM_POWERPC_GPIO_H */
+#endif /* _ASM_MICROBLAZE_GPIO_H */

arch/microblaze/include/asm/io.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -12,6 +14,9 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/mm.h>          /* Get struct page {...} */
+
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
@@ -112,6 +117,30 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
 #define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
 
+#ifdef CONFIG_MMU
+
+#define mm_ptov(addr)		((void *)__phys_to_virt(addr))
+#define mm_vtop(addr)		((unsigned long)__virt_to_phys(addr))
+#define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
+#define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
+#define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
+
+#define __page_address(page) \
+		(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
+#define page_to_bus(page)	(page_to_phys(page))
+#define bus_to_virt(addr)	(phys_to_virt(addr))
+
+extern void iounmap(void *addr);
+/*extern void *__ioremap(phys_addr_t address, unsigned long size,
+		unsigned long flags);*/
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_nocache(addr, size)      ioremap((addr), (size))
+#define ioremap_fullcache(addr, size)    ioremap((addr), (size))
+
+#else /* CONFIG_MMU */
+
 /**
  *	virt_to_phys - map virtual addresses to physical
  *	@address: address to remap
@@ -160,6 +189,8 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define iounmap(addr)		((void)0)
 #define ioremap_nocache(physaddr, size)	ioremap(physaddr, size)
 
+#endif /* CONFIG_MMU */
+
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access

arch/microblaze/include/asm/mmu.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,11 +11,109 @@
 #ifndef _ASM_MICROBLAZE_MMU_H
 #define _ASM_MICROBLAZE_MMU_H
 
-#ifndef __ASSEMBLY__
+# ifndef CONFIG_MMU
+#  ifndef __ASSEMBLY__
 typedef struct {
 	struct vm_list_struct	*vmlist;
 	unsigned long		end_brk;
 } mm_context_t;
-#endif /* __ASSEMBLY__ */
+#  endif /* __ASSEMBLY__ */
+# else /* CONFIG_MMU */
+#  ifdef __KERNEL__
+#   ifndef __ASSEMBLY__
 
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+	unsigned long    v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long    h:1;	/* Hash algorithm indicator */
+	unsigned long  api:6;	/* Abbreviated page index */
+	unsigned long  rpn:20;	/* Real (physical) page number */
+	unsigned long     :3;	/* Unused */
+	unsigned long    r:1;	/* Referenced */
+	unsigned long    c:1;	/* Changed */
+	unsigned long    w:1;	/* Write-thru cache mode */
+	unsigned long    i:1;	/* Cache inhibited */
+	unsigned long    m:1;	/* Memory coherence */
+	unsigned long    g:1;	/* Guarded */
+	unsigned long     :1;	/* Unused */
+	unsigned long   pp:2;	/* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#  define PP_RWXX	0 /* Supervisor read/write, User none */
+#  define PP_RWRX	1 /* Supervisor read/write, User read */
+#  define PP_RWRW	2 /* Supervisor read/write, User read/write */
+#  define PP_RXRX	3 /* Supervisor read,       User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+	unsigned long    t:1;	/* Normal or I/O  type */
+	unsigned long   ks:1;	/* Supervisor 'key' (normally 0) */
+	unsigned long   kp:1;	/* User 'key' (normally 1) */
+	unsigned long    n:1;	/* No-execute */
+	unsigned long     :4;	/* Unused */
+	unsigned long vsid:24;	/* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va);	/* invalidate a TLB entry */
+extern void _tlbia(void);		/* invalidate all TLB entries */
+#   endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+#  define MICROBLAZE_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+#  define TLB_LO		1
+#  define TLB_HI		0
+#  define TLB_DATA		TLB_LO
+#  define TLB_TAG		TLB_HI
+
+/* Tag portion */
+#  define TLB_EPN_MASK		0xFFFFFC00 /* Effective Page Number */
+#  define TLB_PAGESZ_MASK	0x00000380
+#  define TLB_PAGESZ(x)		(((x) & 0x7) << 7)
+#  define PAGESZ_1K		0
+#  define PAGESZ_4K		1
+#  define PAGESZ_16K		2
+#  define PAGESZ_64K		3
+#  define PAGESZ_256K		4
+#  define PAGESZ_1M		5
+#  define PAGESZ_4M		6
+#  define PAGESZ_16M		7
+#  define TLB_VALID		0x00000040 /* Entry is valid */
+
+/* Data portion */
+#  define TLB_RPN_MASK		0xFFFFFC00 /* Real Page Number */
+#  define TLB_PERM_MASK		0x00000300
+#  define TLB_EX		0x00000200 /* Instruction execution allowed */
+#  define TLB_WR		0x00000100 /* Writes permitted */
+#  define TLB_ZSEL_MASK		0x000000F0
+#  define TLB_ZSEL(x)		(((x) & 0xF) << 4)
+#  define TLB_ATTR_MASK		0x0000000F
+#  define TLB_W			0x00000008 /* Caching is write-through */
+#  define TLB_I			0x00000004 /* Caching is inhibited */
+#  define TLB_M			0x00000002 /* Memory is coherent */
+#  define TLB_G			0x00000001 /* Memory is guarded from prefetch */
+
+#  endif /* __KERNEL__ */
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_MMU_H */

arch/microblaze/include/asm/mmu_context.h

@@ -1,21 +1,5 @@
-/*
+#ifdef CONFIG_MMU
- * Copyright (C) 2006 Atmark Techno, Inc.
+# include "mmu_context_mm.h"
- *
+#else
- * This file is subject to the terms and conditions of the GNU General Public
+# include "mmu_context_no.h"
- * License. See the file "COPYING" in the main directory of this archive
+#endif
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */

arch/microblaze/include/asm/mmu_context_mm.h

@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm-generic/mm_hooks.h>
+
+# ifdef __KERNEL__
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.
+ */
+# define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   MicroBlaze has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+# define NO_CONTEXT	256
+# define LAST_CONTEXT	255
+# define FIRST_CONTEXT	1
+
+/*
+ * Set the current MMU context.
+ * This is done byloading up the segment registers for the user part of the
+ * address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * Since we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	mm_context_t ctx;
+
+	if (mm->context != NO_CONTEXT)
+		return;
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context = ctx;
+	context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+# define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != NO_CONTEXT) {
+		clear_bit(mm->context, context_map);
+		mm->context = NO_CONTEXT;
+		atomic_inc(&nr_free_contexts);
+	}
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	tsk->thread.pgdir = next->pgd;
+	get_mmu_context(next);
+	set_context(next->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *active_mm,
+			struct mm_struct *mm)
+{
+	current->thread.pgdir = mm->pgd;
+	get_mmu_context(mm);
+	set_context(mm->context, mm->pgd);
+}
+
+extern void mmu_context_init(void);
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */

arch/microblaze/include/asm/mmu_context_no.h

@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+# define init_new_context(tsk, mm)		({ 0; })
+
+# define enter_lazy_tlb(mm, tsk)		do {} while (0)
+# define change_mm_context(old, ctx, _pml4)	do {} while (0)
+# define destroy_context(mm)			do {} while (0)
+# define deactivate_mm(tsk, mm)			do {} while (0)
+# define switch_mm(prev, next, tsk)		do {} while (0)
+# define activate_mm(prev, next)		do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */

arch/microblaze/include/asm/page.h

@@ -1,6 +1,8 @@
 /*
- * Copyright (C) 2008 Michal Simek
+ * VM ops
- * Copyright (C) 2008 PetaLogix
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  * Changes for MMU support:
  *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
@@ -15,14 +17,15 @@
 
 #include <linux/pfn.h>
 #include <asm/setup.h>
+#include <linux/const.h>
+
+#ifdef __KERNEL__
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
@@ -35,6 +38,7 @@
 /* align addr on a size boundary - adjust address up if needed */
 #define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
 
+#ifndef CONFIG_MMU
 /*
  * PAGE_OFFSET -- the first address of the first page of memory. When not
  * using MMU this corresponds to the first free page in physical memory (aligned
@@ -43,15 +47,44 @@
 extern unsigned int __page_offset;
 #define PAGE_OFFSET __page_offset
 
-#define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+#else /* CONFIG_MMU */
-#define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)		free_page(addr)
 
-#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. With MMU
+ * it is set to the kernel start address (aligned on a page boundary).
+ *
+ * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
+ * in arch/microblaze/Makefile.
+ */
+#define PAGE_OFFSET	CONFIG_KERNEL_START
 
+/*
+ * MAP_NR -- given an address, calculate the index of the page struct which
+ * points to the address's page.
+ */
+#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
 
-#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+/*
-#define copy_user_page(vto, vfrom, vaddr, topg) \
+ * The basic type of a PTE - 32 bit physical addressing.
+ */
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#define PTE_FMT		"%.8lx"
+
+#endif /* CONFIG_MMU */
+
+#  ifndef CONFIG_MMU
+#  define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+#  define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
+#  define free_user_page(page, addr)		free_page(addr)
+#  else /* CONFIG_MMU */
+extern void copy_page(void *to, void *from);
+#  endif /* CONFIG_MMU */
+
+# define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+
+# define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+# define copy_user_page(vto, vfrom, vaddr, topg) \
 			memcpy((vto), (vfrom), PAGE_SIZE)
 
 /*
@@ -60,21 +93,32 @@ extern unsigned int __page_offset;
 typedef struct page *pgtable_t;
 typedef struct { unsigned long	pte; }		pte_t;
 typedef struct { unsigned long	pgprot; }	pgprot_t;
+/* FIXME this can depend on linux kernel version */
+#   ifdef CONFIG_MMU
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#   else /* CONFIG_MMU */
 typedef struct { unsigned long	ste[64]; }	pmd_t;
 typedef struct { pmd_t		pue[1]; }	pud_t;
 typedef struct { pud_t		pge[1]; }	pgd_t;
+#   endif /* CONFIG_MMU */
 
+# define pte_val(x)	((x).pte)
+# define pgprot_val(x)	((x).pgprot)
 
-#define pte_val(x)	((x).pte)
+#   ifdef CONFIG_MMU
-#define pgprot_val(x)	((x).pgprot)
+#   define pmd_val(x)      ((x).pmd)
-#define pmd_val(x)	((x).ste[0])
+#   define pgd_val(x)      ((x).pgd)
-#define pud_val(x)	((x).pue[0])
+#   else  /* CONFIG_MMU */
-#define pgd_val(x)	((x).pge[0])
+#   define pmd_val(x)	((x).ste[0])
+#   define pud_val(x)	((x).pue[0])
+#   define pgd_val(x)	((x).pge[0])
+#   endif  /* CONFIG_MMU */
 
-#define __pte(x)	((pte_t) { (x) })
+# define __pte(x)	((pte_t) { (x) })
-#define __pmd(x)	((pmd_t) { (x) })
+# define __pmd(x)	((pmd_t) { (x) })
-#define __pgd(x)	((pgd_t) { (x) })
+# define __pgd(x)	((pgd_t) { (x) })
-#define __pgprot(x)	((pgprot_t) { (x) })
+# define __pgprot(x)	((pgprot_t) { (x) })
 
 /**
  * Conversions for virtual address, physical address, pfn, and struct
@@ -94,44 +138,80 @@ extern unsigned long max_low_pfn;
 extern unsigned long min_low_pfn;
 extern unsigned long max_pfn;
 
-#define __pa(vaddr)		((unsigned long) (vaddr))
+extern unsigned long memory_start;
-#define __va(paddr)		((void *) (paddr))
+extern unsigned long memory_end;
+extern unsigned long memory_size;
 
-#define phys_to_pfn(phys)	(PFN_DOWN(phys))
+extern int page_is_ram(unsigned long pfn);
-#define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
 
-#define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
+# define phys_to_pfn(phys)	(PFN_DOWN(phys))
-#define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
+# define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
 
-#define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
+# define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
-#define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+# define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
 
-#define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
+#  ifdef CONFIG_MMU
-#define page_to_bus(page)	(page_to_phys(page))
+#  define virt_to_page(kaddr) 	(mem_map +  MAP_NR(kaddr))
-#define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+#  else /* CONFIG_MMU */
+#  define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
+#  define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+#  define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
+#  define page_to_bus(page)	(page_to_phys(page))
+#  define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+#  endif /* CONFIG_MMU */
 
-extern unsigned int memory_start;
+#  ifndef CONFIG_MMU
-extern unsigned int memory_end;
+#  define pfn_valid(pfn)	((pfn) >= min_low_pfn && (pfn) <= max_mapnr)
-extern unsigned int memory_size;
+#  define ARCH_PFN_OFFSET	(PAGE_OFFSET >> PAGE_SHIFT)
+#  else /* CONFIG_MMU */
+#  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
+#  define pfn_valid(pfn)	((pfn) < (max_mapnr + ARCH_PFN_OFFSET))
+#  define VALID_PAGE(page) 	((page - mem_map) < max_mapnr)
+#  endif /* CONFIG_MMU */
 
-#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+# endif /* __ASSEMBLY__ */
-
-#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
-
-#else
-#define tophys(rd, rs)	(addik rd, rs, 0)
-#define tovirt(rd, rs)	(addik rd, rs, 0)
-#endif /* __ASSEMBLY__ */
 
 #define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
+
+#  ifndef CONFIG_MMU
+#  define __pa(vaddr)	((unsigned long) (vaddr))
+#  define __va(paddr)	((void *) (paddr))
+#  else /* CONFIG_MMU */
+#  define __pa(x)	__virt_to_phys((unsigned long)(x))
+#  define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
+#  endif /* CONFIG_MMU */
+
+
 /* Convert between virtual and physical address for MMU. */
 /* Handle MicroBlaze processor with virtual memory. */
+#ifndef CONFIG_MMU
 #define __virt_to_phys(addr)	addr
 #define __phys_to_virt(addr)	addr
+#define tophys(rd, rs)	addik rd, rs, 0
+#define tovirt(rd, rs)	addik rd, rs, 0
+#else
+#define __virt_to_phys(addr) \
+	((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define __phys_to_virt(addr) \
+	((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#define tophys(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define tovirt(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#endif /* CONFIG_MMU */
 
 #define TOPHYS(addr)  __virt_to_phys(addr)
 
+#ifdef CONFIG_MMU
+#ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
+#define WANT_PAGE_VIRTUAL 1 /* page alloc 2 relies on this */
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif /* CONFIG_MMU */
+
 #endif /* __KERNEL__ */
 
 #include <asm-generic/memory_model.h>

arch/microblaze/include/asm/pgalloc.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,195 @@
 #ifndef _ASM_MICROBLAZE_PGALLOC_H
 #define _ASM_MICROBLAZE_PGALLOC_H
 
+#ifdef CONFIG_MMU
+
+#include <linux/kernel.h>	/* For min/max macros */
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define PGDIR_ORDER	0
+
+/*
+ * This is handled very differently on MicroBlaze since out page tables
+ * are all 0's and I want to be able to use these zero'd pages elsewhere
+ * as well - it gives us quite a speedup.
+ * -- Cort
+ */
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+} quicklists;
+
+#define pgd_quicklist		(quicklists.pgd_cache)
+#define pmd_quicklist		((unsigned long *)0)
+#define pte_quicklist		(quicklists.pte_cache)
+#define pgtable_cache_size	(quicklists.pgtable_cache_sz)
+
+extern unsigned long *zero_cache; /* head linked list of pre-zero'd pages */
+extern atomic_t zero_sz; /* # currently pre-zero'd pages */
+extern atomic_t zeropage_hits; /* # zero'd pages request that we've done */
+extern atomic_t zeropage_calls; /* # zero'd pages request that've been made */
+extern atomic_t zerototal; /* # pages zero'd over time */
+
+#define zero_quicklist		(zero_cache)
+#define zero_cache_sz	 	(zero_sz)
+#define zero_cache_calls	(zeropage_calls)
+#define zero_cache_hits		(zeropage_hits)
+#define zero_cache_total	(zerototal)
+
+/*
+ * return a pre-zero'd page from the list,
+ * return NULL if none available -- Cort
+ */
+extern unsigned long get_zero_page_fast(void);
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern inline pgd_t *get_pgd_slow(void)
+{
+	pgd_t *ret;
+
+	ret = (pgd_t *)__get_free_pages(GFP_KERNEL, PGDIR_ORDER);
+	if (ret != NULL)
+		clear_page(ret);
+	return ret;
+}
+
+extern inline pgd_t *get_pgd_fast(void)
+{
+	unsigned long *ret;
+
+	ret = pgd_quicklist;
+	if (ret != NULL) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	} else
+		ret = (unsigned long *)get_pgd_slow();
+	return (pgd_t *)ret;
+}
+
+extern inline void free_pgd_fast(pgd_t *pgd)
+{
+	*(unsigned long **)pgd = pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	pgtable_cache_size++;
+}
+
+extern inline void free_pgd_slow(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+#define pgd_free(mm, pgd)        free_pgd_fast(pgd)
+#define pgd_alloc(mm)		get_pgd_fast()
+
+#define pmd_pgtable(pmd)	pmd_page(pmd)
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one_fast(mm, address)	({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
+/* FIXME two definition - look below */
+#define pmd_free(mm, x)			do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+		unsigned long address)
+{
+	pte_t *pte;
+	extern int mem_init_done;
+	extern void *early_get_page(void);
+	if (mem_init_done) {
+		pte = (pte_t *)__get_free_page(GFP_KERNEL |
+					__GFP_REPEAT | __GFP_ZERO);
+	} else {
+		pte = (pte_t *)early_get_page();
+		if (pte)
+			clear_page(pte);
+	}
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+		unsigned long address)
+{
+	struct page *ptepage;
+
+#ifdef CONFIG_HIGHPTE
+	int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+#else
+	int flags = GFP_KERNEL | __GFP_REPEAT;
+#endif
+
+	ptepage = alloc_pages(flags, 0);
+	if (ptepage)
+		clear_highpage(ptepage);
+	return ptepage;
+}
+
+static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm,
+		unsigned long address)
+{
+	unsigned long *ret;
+
+	ret = pte_quicklist;
+	if (ret != NULL) {
+		pte_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	}
+	return (pte_t *)ret;
+}
+
+extern inline void pte_free_fast(pte_t *pte)
+{
+	*(unsigned long **)pte = pte_quicklist;
+	pte_quicklist = (unsigned long *) pte;
+	pgtable_cache_size++;
+}
+
+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+extern inline void pte_free_slow(struct page *ptepage)
+{
+	__free_page(ptepage);
+}
+
+extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+{
+	__free_page(ptepage);
+}
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+
+#define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = page_address(pte))
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		(pmd_val(*(pmd)) = (unsigned long) (pte))
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
+/*#define pmd_free(mm, x)			do { } while (0)*/
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+extern int do_check_pgt_cache(int, int);
+
+#endif /* CONFIG_MMU */
+
 #define check_pgt_cache()	do {} while (0)
 
 #endif /* _ASM_MICROBLAZE_PGALLOC_H */

arch/microblaze/include/asm/pgtable.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,8 @@
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#ifndef CONFIG_MMU
+
 #define pgd_present(pgd)	(1) /* pages are always present on non MMU */
 #define pgd_none(pgd)		(0)
 #define pgd_bad(pgd)		(0)
@@ -27,6 +31,8 @@
 #define PAGE_READONLY		__pgprot(0) /* these mean nothing to non MMU */
 #define PAGE_KERNEL		__pgprot(0) /* these mean nothing to non MMU */
 
+#define pgprot_noncached(x)	(x)
+
 #define __swp_type(x)		(0)
 #define __swp_offset(x)		(0)
 #define __swp_entry(typ, off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
@@ -45,6 +51,538 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 #define arch_enter_lazy_cpu_mode()	do {} while (0)
 
+#else /* CONFIG_MMU */
+
+#include <asm-generic/4level-fixup.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+#define FIRST_USER_ADDRESS	0
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+/* Start and end of the vmalloc area. */
+/* Make sure to map the vmalloc area above the pinned kernel memory area
+   of 32Mb.  */
+#define VMALLOC_START	(CONFIG_KERNEL_START + \
+				max(32 * 1024 * 1024UL, memory_size))
+#define VMALLOC_END	ioremap_bot
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
+ * table containing PTEs, together with a set of 16 segment registers, to
+ * define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ */
+
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	PMD_SHIFT
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
+		__FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
+		__FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+		__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PTE as closely as possible.
+ */
+
+/* There are several potential gotchas here.  The hardware TLBLO
+ * field looks like this:
+ *
+ * 0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap cache
+ * entries use the top 30 bits.  Because 4xx doesn't support SMP
+ * anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+ * is cleared in the TLB miss handler before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ *  * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits.  We actually use use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+/* Definitions for MicroBlaze. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+#define _PMD_PRESENT	PAGE_MASK
+
+/*
+ * Some bits are unused...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK	0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+
+#define _PAGE_KERNEL \
+	(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X \
+		__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_SHARED)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_IO)
+
+/*
+ * We consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep) \
+	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define	pmd_present(pmd)	((pmd_val(pmd) & _PMD_PRESENT) != 0)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#define pte_page(x)		(mem_map + (unsigned long) \
+				((pte_val(x) - memory_start) >> PAGE_SHIFT))
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) | pgprot_val(prot))
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+#define pgd_clear(xp)				do { } while (0)
+#define pgd_page(pgd) \
+	((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+/* FIXME */
+static inline int pte_file(pte_t pte)		{ return 0; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) \
+		{ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = physpage | pgprot_val(pgprot);
+	return pte;
+}
+
+#define mk_pte(page, pgprot) \
+({									   \
+	pte_t pte;							   \
+	pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) |  \
+			pgprot_val(pgprot);				   \
+	pte;								   \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+				unsigned long set)
+{
+	unsigned long old, tmp, msr;
+
+	__asm__ __volatile__("\
+	msrclr	%2, 0x2\n\
+	nop\n\
+	lw	%0, %4, r0\n\
+	andn	%1, %0, %5\n\
+	or	%1, %1, %6\n\
+	sw	%1, %4, r0\n\
+	mts     rmsr, %2\n\
+	nop"
+	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
+	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc");
+
+	return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte(struct mm_struct *mm, unsigned long addr,
+		pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+		pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline int ptep_test_and_clear_young(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
+}
+
+static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, \
+		(_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}*/
+
+static inline void ptep_mkdirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, 0, _PAGE_DIRTY);
+}
+
+/*#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
+
+/* Convert pmd entry to page */
+/* our pmd entry is an effective address of pte table*/
+/* returns effective address of the pmd entry*/
+#define pmd_page_kernel(pmd)	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+
+/* returns struct *page of the pmd entry*/
+#define pmd_page(pmd)	(pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) })
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_page is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit
+ * (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 6)
+#define __swp_entry(type, offset) \
+		((swp_entry_t) { (type) | ((offset) << 6) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
+
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk(unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+/* extern unsigned long mm_ptov(unsigned long addr) \
+	__attribute__ ((const)); TBD */
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ * compilation errors.
+ */
+#define	IOMAP_FULL_CACHING	0
+#define	IOMAP_NOCACHE_SER	1
+#define	IOMAP_NOCACHE_NONSER	2
+#define	IOMAP_NO_COPYBACK	3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+				int nocacheflag, unsigned long *memavailp);
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode(unsigned long address, unsigned long size,
+				unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range remap_page_range
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code);
+
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags);
+
+void __init adjust_total_lowmem(void);
+void mapin_ram(void);
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+extern int mem_init_done;
+extern unsigned long ioremap_base;
+extern unsigned long ioremap_bot;
+
+asmlinkage void __init mmu_init(void);
+
+void __init *early_get_page(void);
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_MMU */
+
 #ifndef __ASSEMBLY__
 #include <asm-generic/pgtable.h>
 

arch/microblaze/include/asm/posix_types.h

@@ -16,7 +16,7 @@
  */
 
 typedef unsigned long	__kernel_ino_t;
-typedef unsigned int	__kernel_mode_t;
+typedef unsigned short	__kernel_mode_t;
 typedef unsigned int	__kernel_nlink_t;
 typedef long		__kernel_off_t;
 typedef int		__kernel_pid_t;

arch/microblaze/include/asm/processor.h

@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -26,14 +26,15 @@ extern const struct seq_operations cpuinfo_op;
 # define cpu_sleep()		do {} while (0)
 # define prepare_to_copy(tsk)	do {} while (0)
 
-# endif /* __ASSEMBLY__ */
-
 #define task_pt_regs(tsk) \
 		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
 
 /* Do necessary setup to start up a newly executed thread. */
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
 
+# endif /* __ASSEMBLY__ */
+
+# ifndef CONFIG_MMU
 /*
  * User space process size: memory size
  *
@@ -85,4 +86,90 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 # define KSTK_EIP(tsk)	(0)
 # define KSTK_ESP(tsk)	(0)
 
+# else /* CONFIG_MMU */
+
+/*
+ * This is used to define STACK_TOP, and with MMU it must be below
+ * kernel base to select the correct PGD when handling MMU exceptions.
+ */
+# define TASK_SIZE	(CONFIG_KERNEL_START)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+# define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+
+# define THREAD_KSP	0
+
+#  ifndef __ASSEMBLY__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#  define current_text_addr()	({ __label__ _l; _l: &&_l; })
+
+/* If you change this, you must change the associated assembly-languages
+ * constants defined below, THREAD_*.
+ */
+struct thread_struct {
+	/* kernel stack pointer (must be first field in structure) */
+	unsigned long	ksp;
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+	void		*pgdir;		/* root of page-table tree */
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+};
+
+#  define INIT_THREAD { \
+	.ksp   = sizeof init_stack + (unsigned long)init_stack, \
+	.pgdir = swapper_pg_dir, \
+}
+
+/* Do necessary setup to start up a newly executed thread.  */
+void start_thread(struct pt_regs *regs,
+		unsigned long pc, unsigned long usp);
+
+/* Free all resources held by a thread. */
+extern inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Free current thread data structures etc.  */
+static inline void exit_thread(void)
+{
+}
+
+/* Return saved (kernel) PC of a blocked thread.  */
+#  define thread_saved_pc(tsk)	\
+	((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* The size allocated for kernel stacks. This _must_ be a power of two! */
+# define KERNEL_STACK_SIZE	0x2000
+
+/* Return some info about the user process TASK.  */
+#  define task_tos(task)	((unsigned long)(task) + KERNEL_STACK_SIZE)
+#  define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
+
+#  define task_pt_regs_plus_args(tsk) \
+	(((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE)
+
+#  define task_sp(task)	(task_regs(task)->r1)
+#  define task_pc(task)	(task_regs(task)->pc)
+/* Grotty old names for some.  */
+#  define KSTK_EIP(task)	(task_pc(task))
+#  define KSTK_ESP(task)	(task_sp(task))
+
+/* FIXME */
+#  define deactivate_mm(tsk, mm)	do { } while (0)
+
+#  define STACK_TOP	TASK_SIZE
+#  define STACK_TOP_MAX	STACK_TOP
+
+#  endif /* __ASSEMBLY__ */
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_PROCESSOR_H */

arch/microblaze/include/asm/ptrace.h

@@ -10,7 +10,6 @@
 #define _ASM_MICROBLAZE_PTRACE_H
 
 #ifndef __ASSEMBLY__
-#include <linux/types.h>
 
 typedef unsigned long microblaze_reg_t;
 

arch/microblaze/include/asm/registers.h

@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -30,4 +30,21 @@
 #define FSR_UF		(1<<1) /* Underflow */
 #define FSR_DO		(1<<0) /* Denormalized operand error */
 
+# ifdef CONFIG_MMU
+/* Machine State Register (MSR) Fields */
+# define MSR_UM		(1<<11) /* User Mode */
+# define MSR_UMS	(1<<12) /* User Mode Save */
+# define MSR_VM		(1<<13) /* Virtual Mode */
+# define MSR_VMS	(1<<14) /* Virtual Mode Save */
+
+# define MSR_KERNEL	(MSR_EE | MSR_VM)
+/* # define MSR_USER	(MSR_KERNEL | MSR_UM | MSR_IE) */
+# define MSR_KERNEL_VMS	(MSR_EE | MSR_VMS)
+/* # define MSR_USER_VMS	(MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
+
+/* Exception State Register (ESR) Fields */
+# define	  ESR_DIZ	(1<<11) /* Zone Protection */
+# define	  ESR_S		(1<<10) /* Store instruction */
+
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_REGISTERS_H */

arch/microblaze/include/asm/sections.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,7 @@
 # ifndef __ASSEMBLY__
 extern char _ssbss[], _esbss[];
 extern unsigned long __ivt_start[], __ivt_end[];
+extern char _etext[], _stext[];
 
 #  ifdef CONFIG_MTD_UCLINUX
 extern char *_ebss;

arch/microblaze/include/asm/segment.h

@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_SEGMENT_H
 #define _ASM_MICROBLAZE_SEGMENT_H
 
-#ifndef __ASSEMBLY__
+# ifndef __ASSEMBLY__
 
 typedef struct {
 	unsigned long seg;
@@ -29,13 +29,19 @@ typedef struct {
  *
  * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
  */
-#  define KERNEL_DS	((mm_segment_t){0})
+# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
+
+#  ifndef CONFIG_MMU
+#  define KERNEL_DS	MAKE_MM_SEG(0)
 #  define USER_DS	KERNEL_DS
+#  else
+#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
+#  endif
 
 # define get_ds()	(KERNEL_DS)
 # define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(x) \
+# define set_fs(val)	(current_thread_info()->addr_limit = (val))
-		do { current_thread_info()->addr_limit = (x); } while (0)
 
 # define segment_eq(a, b)	((a).seg == (b).seg)
 

arch/microblaze/include/asm/setup.h

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -18,7 +19,6 @@
 extern unsigned int boot_cpuid; /* move to smp.h */
 
 extern char cmd_line[COMMAND_LINE_SIZE];
-#  endif/* __KERNEL__ */
 
 void early_printk(const char *fmt, ...);
 
@@ -30,6 +30,11 @@ void setup_heartbeat(void);
 
 unsigned long long sched_clock(void);
 
+#   ifdef CONFIG_MMU
+extern void mmu_reset(void);
+extern void early_console_reg_tlb_alloc(unsigned int addr);
+#   endif /* CONFIG_MMU */
+
 void time_init(void);
 void init_IRQ(void);
 void machine_early_init(const char *cmdline, unsigned int ram,
@@ -40,5 +45,6 @@ void machine_shutdown(void);
 void machine_halt(void);
 void machine_power_off(void);
 
+#  endif/* __KERNEL__ */
 # endif /* __ASSEMBLY__ */
 #endif /* _ASM_MICROBLAZE_SETUP_H */

arch/microblaze/include/asm/stat.h

@@ -16,58 +16,53 @@
 
 #include <linux/posix_types.h>
 
+#define STAT_HAVE_NSEC 1
+
 struct stat {
-	unsigned int	st_dev;
+	unsigned long	st_dev;
 	unsigned long	st_ino;
 	unsigned int	st_mode;
 	unsigned int	st_nlink;
 	unsigned int	st_uid;
 	unsigned int	st_gid;
-	unsigned int	st_rdev;
+	unsigned long	st_rdev;
-	unsigned long	st_size;
+	unsigned long	__pad1;
-	unsigned long	st_blksize;
+	long		st_size;
-	unsigned long	st_blocks;
+	int		st_blksize;
-	unsigned long	st_atime;
+	int		__pad2;
-	unsigned long	__unused1; /* unsigned long  st_atime_nsec */
+	long		st_blocks;
-	unsigned long	st_mtime;
+	int		st_atime;
-	unsigned long	__unused2; /* unsigned long  st_mtime_nsec */
+	unsigned int	st_atime_nsec;
-	unsigned long	st_ctime;
+	int		st_mtime;
-	unsigned long	__unused3; /* unsigned long  st_ctime_nsec */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;
+	unsigned int	st_ctime_nsec;
 	unsigned long	__unused4;
 	unsigned long	__unused5;
 };
 
 struct stat64 {
-	unsigned long long	st_dev;
+	unsigned long long	st_dev;		/* Device.  */
-	unsigned long	__unused1;
+	unsigned long long	st_ino;		/* File serial number.  */
-
+	unsigned int		st_mode;	/* File mode.  */
-	unsigned long long	st_ino;
+	unsigned int		st_nlink;	/* Link count.  */
-
+	unsigned int		st_uid;		/* User ID of the file's owner.  */
-	unsigned int	st_mode;
+	unsigned int		st_gid;		/* Group ID of the file's group. */
-	unsigned int	st_nlink;
+	unsigned long long	st_rdev;	/* Device number, if device.  */
-
+	unsigned long long	__pad1;
-	unsigned int	st_uid;
+	long long		st_size;	/* Size of file, in bytes.  */
-	unsigned int	st_gid;
+	int			st_blksize;	/* Optimal block size for I/O.  */
-
+	int			__pad2;
-	unsigned long long	st_rdev;
+	long long		st_blocks;	/* Number 512-byte blocks allocated. */
-	unsigned long	__unused3;
+	int			st_atime;	/* Time of last access.  */
-
+	unsigned int		st_atime_nsec;
-	long long	st_size;
+	int			st_mtime;	/* Time of last modification.  */
-	unsigned long	st_blksize;
+	unsigned int		st_mtime_nsec;
-
+	int			st_ctime;	/* Time of last status change.  */
-	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
+	unsigned int		st_ctime_nsec;
-	unsigned long	__unused4; /* future possible st_blocks high bits */
+	unsigned int		__unused4;
-
+	unsigned int		__unused5;
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long	__unused8;
 };
 
 #endif /* _ASM_MICROBLAZE_STAT_H */
+

arch/microblaze/include/asm/string.h

@@ -9,7 +9,7 @@
 #ifndef _ASM_MICROBLAZE_STRING_H
 #define _ASM_MICROBLAZE_STRING_H
 
-#ifndef __KERNEL__
+#ifdef __KERNEL__
 
 #define __HAVE_ARCH_MEMSET
 #define __HAVE_ARCH_MEMCPY

arch/microblaze/include/asm/syscalls.h

@@ -34,6 +34,9 @@ asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
 asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
 		struct old_sigaction *oact);
 
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+
 asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs);
 

arch/microblaze/include/asm/thread_info.h

@@ -122,6 +122,8 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SINGLESTEP		4
 #define TIF_IRET		5 /* return with iret */
 #define TIF_MEMDIE		6
+#define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
+#define TIF_SECCOMP		10      /* secure computing */
 #define TIF_FREEZE		14	/* Freezing for suspend */
 
 /* FIXME change in entry.S */
@@ -138,10 +140,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_IRET		(1<<TIF_IRET)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_KERNEL_TRACE	(1 << TIF_KERNEL_TRACE)
 
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK  (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		0x0000FFFE
+
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	0x0000FFFF
 
@@ -154,6 +163,17 @@ static inline struct thread_info *current_thread_info(void)
  */
 /* FPU was used by this task this quantum (SMP) */
 #define TS_USEDFPU		0x0001
+#define TS_RESTORE_SIGMASK	0x0002
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_THREAD_INFO_H */

arch/microblaze/include/asm/tlb.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -13,4 +15,10 @@
 
 #include <asm-generic/tlb.h>
 
+#ifdef CONFIG_MMU
+#define tlb_start_vma(tlb, vma)		do { } while (0)
+#define tlb_end_vma(tlb, vma)		do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_TLB_H */

arch/microblaze/include/asm/tlbflush.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,50 @@
 #ifndef _ASM_MICROBLAZE_TLBFLUSH_H
 #define _ASM_MICROBLAZE_TLBFLUSH_H
 
+#ifdef CONFIG_MMU
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>	/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#define __tlbia()	_tlbia()
+
+static inline void local_flush_tlb_all(void)
+	{ __tlbia(); }
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void local_flush_tlb_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+	{ __tlbia(); }
+
+#define flush_tlb_kernel_range(start, end)	do { } while (0)
+
+#define update_mmu_cache(vma, addr, pte)	do { } while (0)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages.  We don't need to do anything here, there's nothing special
+ * about our page-table pages.  -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+	unsigned long start, unsigned long end) { }
+
+#else /* CONFIG_MMU */
+
 #define flush_tlb()				BUG()
 #define flush_tlb_all()				BUG()
 #define flush_tlb_mm(mm)			BUG()
@@ -17,4 +63,6 @@
 #define flush_tlb_pgtables(mm, start, end)	BUG()
 #define flush_tlb_kernel_range(start, end)	BUG()
 
+#endif /* CONFIG_MMU */
+
 #endif /* _ASM_MICROBLAZE_TLBFLUSH_H */

arch/microblaze/include/asm/uaccess.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -26,6 +28,10 @@
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
+#define __clear_user(addr, n)	(memset((void *)(addr), 0, (n)), 0)
+
+#ifndef CONFIG_MMU
+
 extern int ___range_ok(unsigned long addr, unsigned long size);
 
 #define __range_ok(addr, size) \
@@ -34,13 +40,12 @@ extern int ___range_ok(unsigned long addr, unsigned long size);
 #define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 #define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
 
-extern inline int bad_user_access_length(void)
+/* Undefined function to trigger linker error */
-{
+extern int bad_user_access_length(void);
-	return 0;
+
-}
 /* FIXME this is function for optimalization -> memcpy */
 #define __get_user(var, ptr)				\
-	({							\
+({							\
 	int __gu_err = 0;				\
 	switch (sizeof(*(ptr))) {			\
 	case 1:						\
@@ -57,12 +62,13 @@ extern inline int bad_user_access_length(void)
 		break;					\
 	}						\
 	__gu_err;					\
-	})
+})
 
 #define __get_user_bad()	(bad_user_access_length(), (-EFAULT))
 
+/* FIXME is not there defined __pu_val */
 #define __put_user(var, ptr)					\
-	({							\
+({								\
 	int __pu_err = 0;					\
 	switch (sizeof(*(ptr))) {				\
 	case 1:							\
@@ -71,8 +77,8 @@ extern inline int bad_user_access_length(void)
 		*(ptr) = (var);					\
 		break;						\
 	case 8: {						\
-			typeof(*(ptr)) __pu_val = var;		\
+		typeof(*(ptr)) __pu_val = (var);		\
-			memcpy(ptr, &__pu_val, sizeof(__pu_val));\
+		memcpy(ptr, &__pu_val, sizeof(__pu_val));	\
 		}						\
 		break;						\
 	default:						\
@@ -80,22 +86,22 @@ extern inline int bad_user_access_length(void)
 		break;						\
 	}							\
 	__pu_err;						\
-	})
+})
 
 #define __put_user_bad()	(bad_user_access_length(), (-EFAULT))
 
-#define put_user(x, ptr)	__put_user(x, ptr)
+#define put_user(x, ptr)	__put_user((x), (ptr))
-#define get_user(x, ptr)	__get_user(x, ptr)
+#define get_user(x, ptr)	__get_user((x), (ptr))
 
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)	(memcpy((to), (from), (n)), 0)
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_from_user(to, from, n)	(memcpy((to), (from), (n)), 0)
 
-#define __copy_to_user(to, from, n)		(copy_to_user(to, from, n))
+#define __copy_to_user(to, from, n)	(copy_to_user((to), (from), (n)))
-#define __copy_from_user(to, from, n)		(copy_from_user(to, from, n))
+#define __copy_from_user(to, from, n)	(copy_from_user((to), (from), (n)))
-#define __copy_to_user_inatomic(to, from, n)	(__copy_to_user(to, from, n))
+#define __copy_to_user_inatomic(to, from, n) \
-#define __copy_from_user_inatomic(to, from, n)	(__copy_from_user(to, from, n))
+			(__copy_to_user((to), (from), (n)))
-
+#define __copy_from_user_inatomic(to, from, n) \
-#define __clear_user(addr, n)	(memset((void *)addr, 0, n), 0)
+			(__copy_from_user((to), (from), (n)))
 
 static inline unsigned long clear_user(void *addr, unsigned long size)
 {
@@ -107,10 +113,197 @@ static inline unsigned long clear_user(void *addr, unsigned long size)
 /* Returns 0 if exception not found and fixup otherwise.  */
 extern unsigned long search_exception_table(unsigned long);
 
+extern long strncpy_from_user(char *dst, const char *src, long count);
+extern long strnlen_user(const char *src, long count);
 
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
+#else /* CONFIG_MMU */
-extern long strnlen_user(const char __user *src, long count);
+
-extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+/*
+ * Address is valid if:
+ *  - "addr", "addr + size" and "size" are all below the limit
+ */
+#define access_ok(type, addr, size) \
+	(get_fs().seg > (((unsigned long)(addr)) | \
+		(size) | ((unsigned long)(addr) + (size))))
+
+/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
+ type?"WRITE":"READ",addr,size,get_fs().seg)) */
+
+/*
+ * All the __XXX versions macros/functions below do not perform
+ * access checking. It is assumed that the necessary checks have been
+ * already performed before the finction (macro) is called.
+ */
+
+#define get_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
+		? __get_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define put_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
+		? __put_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define __get_user(x, ptr)						\
+({									\
+	unsigned long __gu_val;						\
+	/*unsigned long __gu_ptr = (unsigned long)(ptr);*/		\
+	long __gu_err;							\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_asm("lbu", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2:								\
+		__get_user_asm("lhu", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	default:							\
+		__gu_val = 0; __gu_err = -EINVAL;			\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)		\
+({									\
+	__asm__ __volatile__ (						\
+			"1:"	insn	" %1, %2, r0;			\
+				addk	%0, r0, r0;			\
+			2:						\
+			.section .fixup,\"ax\";				\
+			3:	brid	2b;				\
+				addik	%0, r0, %3;			\
+			.previous;					\
+			.section __ex_table,\"a\";			\
+			.word	1b,3b;					\
+			.previous;"					\
+		: "=r"(__gu_err), "=r"(__gu_val)			\
+		: "r"(__gu_ptr), "i"(-EFAULT)				\
+	);								\
+})
+
+#define __put_user(x, ptr)						\
+({									\
+	__typeof__(*(ptr)) __gu_val = x;				\
+	long __gu_err = 0;						\
+	switch (sizeof(__gu_val)) {					\
+	case 1:								\
+		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2: 							\
+		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__put_user_asm("sw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 8:								\
+		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
+		break;							\
+	default:							\
+		__gu_err = -EINVAL;					\
+	}								\
+	__gu_err;							\
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)	\
+({							\
+__asm__ __volatile__ ("	lwi	%0, %1, 0;		\
+		1:	swi	%0, %2, 0;		\
+			lwi	%0, %1, 4;		\
+		2:	swi	%0, %2, 4;		\
+			addk	%0,r0,r0;		\
+		3:					\
+		.section .fixup,\"ax\";			\
+		4:	brid	3b;			\
+			addik	%0, r0, %3;		\
+		.previous;				\
+		.section __ex_table,\"a\";		\
+		.word	1b,4b,2b,4b;			\
+		.previous;"				\
+	: "=&r"(__gu_err)				\
+	: "r"(&__gu_val),				\
+	"r"(__gu_ptr), "i"(-EFAULT)			\
+	);						\
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;		\
+				addk	%0, r0, r0;		\
+			2:					\
+			.section .fixup,\"ax\";			\
+			3:	brid	2b;			\
+				addik	%0, r0, %3;		\
+			.previous;				\
+			.section __ex_table,\"a\";		\
+			.word	1b,3b;				\
+			.previous;"				\
+		: "=r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
+})
+
+/*
+ * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
+ */
+static inline int clear_user(char *to, int size)
+{
+	if (size && access_ok(VERIFY_WRITE, to, size)) {
+		__asm__ __volatile__ ("				\
+				1:				\
+					sb	r0, %2, r0;	\
+					addik	%0, %0, -1;	\
+					bneid	%0, 1b;		\
+					addik	%2, %2, 1;	\
+				2:				\
+				.section __ex_table,\"a\";	\
+				.word	1b,2b;			\
+				.section .text;"		\
+			: "=r"(size)				\
+			: "0"(size), "r"(to)
+		);
+	}
+	return size;
+}
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#define copy_to_user(to, from, n)					\
+	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
+		__copy_tofrom_user((void __user *)(to),			\
+			(__force const void __user *)(from), (n))	\
+		: -EFAULT)
+
+#define __copy_to_user(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
+
+#define copy_from_user(to, from, n)					\
+	(access_ok(VERIFY_READ, (from), (n)) ?				\
+		__copy_tofrom_user((__force void __user *)(to),		\
+			(void __user *)(from), (n))			\
+		: -EFAULT)
+
+#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+		copy_from_user((to), (from), (n))
+
+extern int __strncpy_user(char *to, const char __user *from, int len);
+extern int __strnlen_user(const char __user *sstr, int len);
+
+#define strncpy_from_user(to, from, len)	\
+		(access_ok(VERIFY_READ, from, 1) ?	\
+			__strncpy_user(to, from, len) : -EFAULT)
+#define strnlen_user(str, len)	\
+		(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
+
+#endif /* CONFIG_MMU */
 
 /*
  * The exception table consists of pairs of addresses: the first is the

arch/microblaze/include/asm/unaligned.h

@@ -12,7 +12,8 @@
 
 # ifdef __KERNEL__
 
-# include <linux/unaligned/access_ok.h>
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
 # include <linux/unaligned/generic.h>
 
 # define get_unaligned	__get_unaligned_be

arch/microblaze/kernel/Makefile

@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_SELFMOD)		+= selfmod.o
 obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
+obj-$(CONFIG_MMU)		+= misc.o
 
 obj-y	+= entry$(MMUEXT).o

arch/microblaze/kernel/asm-offsets.c

@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
@@ -68,16 +69,26 @@ int main(int argc, char *argv[])
 
 	/* struct task_struct */
 	DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+#ifdef CONFIG_MMU
+	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	BLANK();
+
+	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+	BLANK();
+#endif
 
 	/* struct thread_info */
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
-	DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
 	BLANK();
 

arch/microblaze/kernel/early_printk.c

@@ -87,6 +87,9 @@ int __init setup_early_printk(char *opt)
 	base_addr = early_uartlite_console();
 	if (base_addr) {
 		early_console_initialized = 1;
+#ifdef CONFIG_MMU
+		early_console_reg_tlb_alloc(base_addr);
+#endif
 		early_printk("early_printk_console is enabled at 0x%08x\n",
 							base_addr);
 

arch/microblaze/kernel/entry-nommu.S

@@ -10,7 +10,7 @@
 
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
 #include <asm/registers.h>

arch/microblaze/kernel/exceptions.c

@@ -21,9 +21,9 @@
 
 #include <asm/exceptions.h>
 #include <asm/entry.h>		/* For KM CPU var */
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
 #include <asm/current.h>
 
 #define MICROBLAZE_ILL_OPCODE_EXCEPTION	0x02
@@ -31,7 +31,7 @@
 #define MICROBLAZE_DBUS_EXCEPTION	0x04
 #define MICROBLAZE_DIV_ZERO_EXCEPTION	0x05
 #define MICROBLAZE_FPU_EXCEPTION	0x06
-#define MICROBLAZE_PRIVILEG_EXCEPTION	0x07
+#define MICROBLAZE_PRIVILEGED_EXCEPTION	0x07
 
 static DEFINE_SPINLOCK(die_lock);
 
@@ -66,6 +66,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 							int fsr, int addr)
 {
+#ifdef CONFIG_MMU
+	int code;
+	addr = regs->pc;
+#endif
+
 #if 0
 	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
 			type, user_mode(regs) ? "user" : "kernel", fsr,
@@ -74,7 +79,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 
 	switch (type & 0x1F) {
 	case MICROBLAZE_ILL_OPCODE_EXCEPTION:
+		if (user_mode(regs)) {
+			printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
 			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+		die("opcode exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_IBUS_EXCEPTION:
 		if (user_mode(regs)) {
@@ -95,11 +106,16 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DIV_ZERO_EXCEPTION:
-		printk(KERN_WARNING "Divide by zero exception\n");
+		if (user_mode(regs)) {
+			printk(KERN_WARNING "Divide by zero exception in user mode\n");
 			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+		die("Divide by exception", regs, SIGBUS);
 		break;
-
 	case MICROBLAZE_FPU_EXCEPTION:
+		printk(KERN_WARNING "FPU exception\n");
 		/* IEEE FP exception */
 		/* I removed fsr variable and use code var for storing fsr */
 		if (fsr & FSR_IO)
@@ -115,7 +131,20 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		_exception(SIGFPE, regs, fsr, addr);
 		break;
 
+#ifdef CONFIG_MMU
+	case MICROBLAZE_PRIVILEGED_EXCEPTION:
+		printk(KERN_WARNING "Privileged exception\n");
+		/* "brk r0,r0" - used as debug breakpoint */
+		if (get_user(code, (unsigned long *)regs->pc) == 0
+			&& code == 0x980c0000) {
+			_exception(SIGTRAP, regs, TRAP_BRKPT, addr);
+		} else {
+			_exception(SIGILL, regs, ILL_PRVOPC, addr);
+		}
+		break;
+#endif
 	default:
+	/* FIXME what to do in unexpected exception */
 		printk(KERN_WARNING "Unexpected exception %02x "
 			"PC=%08x in %s mode\n", type, (unsigned int) addr,
 			kernel_mode(regs) ? "kernel" : "user");

arch/microblaze/kernel/head.S

@@ -3,6 +3,26 @@
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -12,6 +32,22 @@
 #include <asm/thread_info.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_MMU
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+	.space	4096
+.global swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+#endif /* CONFIG_MMU */
+
 	.text
 ENTRY(_start)
 	mfs	r1, rmsr
@@ -32,6 +68,123 @@ _copy_fdt:
 	addik	r3, r3, -4 /* descrement loop */
 no_fdt_arg:
 
+#ifdef CONFIG_MMU
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line to __init_end. There is space for storing command line.
+ */
+	or	r6, r0, r0		/* incremment */
+	ori	r4, r0, __init_end	/* load address of command line */
+	tophys(r4,r4)			/* convert to phys address */
+	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+	lbu	r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+	sb	r7, r4, r6		/* addr[r4+r6]= r7*/
+	addik	r6, r6, 1		/* increment counting */
+	bgtid	r3, _copy_command_line	/* loop for all entries       */
+	addik	r3, r3, -1		/* descrement loop */
+	addik	r5, r4, 0		/* add new space for command line */
+	tovirt(r5,r5)
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+	or	r6, r0, r0				/* incremment */
+	ori	r4, r0, TOPHYS(_bram_load_start)	/* save bram context */
+	ori	r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+	lw	r7, r0, r6		/* r7 = r0 + r6 */
+	sw	r7, r4, r6		/* addr[r4 + r6] = r7*/
+	addik	r6, r6, 4		/* increment counting */
+	bgtid	r3, _copy_bram		/* loop for all entries */
+	addik	r3, r3, -4		/* descrement loop */
+#endif
+	/* We have to turn on the MMU right away. */
+
+	/*
+	 * Set up the initial MMU state so we can do the first level of
+	 * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+	 * virtual to physical.
+	 */
+	nop
+	addik	r3, r0, 63		/* Invalidate all TLB entries */
+_invalidate:
+	mts	rtlbx, r3
+	mts	rtlbhi, r0			/* flush: ensure V is clear   */
+	bgtid	r3, _invalidate		/* loop for all entries       */
+	addik	r3, r3, -1
+	/* sync */
+
+	/*
+	 * We should still be executing code at physical address area
+	 * RAM_BASEADDR at this point. However, kernel code is at
+	 * a virtual address. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
+	/*
+	 * Configure and load two entries into TLB slots 0 and 1.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	andi	r4,r4,0xfffffc00	/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	andi	r3,r3,0xfffffc00	/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+	mts     rtlbx,r0		/* TLB slow 0 */
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	addik	r4, r4, 0x01000000	/* Map next 16 M entries */
+	addik	r3, r3, 0x01000000
+
+	ori	r6,r0,1			/* TLB slot 1 */
+	mts     rtlbx,r6
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * Load a TLB entry for LMB, since we need access to
+	 * the exception vectors, using a 4k real==virtual mapping.
+	 */
+	ori	r6,r0,3			/* TLB slot 3 */
+	mts     rtlbx,r6
+
+	ori	r4,r0,(TLB_WR | TLB_EX)
+	ori	r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+	 * caches ready to work.
+	 */
+turn_on_mmu:
+	ori	r15,r0,start_here
+	ori	r4,r0,MSR_KERNEL_VMS
+	mts	rmsr,r4
+	nop
+	rted	r15,0			/* enables MMU */
+	nop
+
+start_here:
+#endif /* CONFIG_MMU */
+
 	/* Initialize small data anchors */
 	la	r13, r0, _KERNEL_SDA_BASE_
 	la	r2, r0, _KERNEL_SDA2_BASE_
@@ -51,6 +204,43 @@ no_fdt_arg:
 	brald	r15, r8
 	nop
 
+#ifndef CONFIG_MMU
 	la	r15, r0, machine_halt
 	braid	start_kernel
 	nop
+#else
+	/*
+	 * Initialize the MMU.
+	 */
+	bralid	r15, mmu_init
+	nop
+
+	/* Go back to running unmapped so we can load up new values
+	 * and change to using our exception vectors.
+	 * On the MicroBlaze, all we invalidate the used TLB entries to clear
+	 * the old 16M byte TLB mappings.
+	 */
+	ori	r15,r0,TOPHYS(kernel_load_context)
+	ori	r4,r0,MSR_KERNEL
+	mts	rmsr,r4
+	nop
+	bri	4
+	rted	r15,0
+	nop
+
+	/* Load up the kernel context */
+kernel_load_context:
+	# Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away.
+	ori	r5,r0,3
+	mts     rtlbx,r5
+	nop
+	mts	rtlbhi,r0
+	nop
+	addi	r15, r0, machine_halt
+	ori	r17, r0, start_kernel
+	ori	r4, r0, MSR_KERNEL_VMS
+	mts	rmsr, r4
+	nop
+	rted	r17, 0		/* enable MMU and jump to start_kernel */
+	nop
+#endif /* CONFIG_MMU */

arch/microblaze/kernel/hw_exception_handler.S

@@ -53,6 +53,12 @@
  *   - Illegal instruction opcode
  *   - Divide-by-zero
  *
+ *   - Privileged instruction exception (MMU)
+ *   - Data storage exception (MMU)
+ *   - Instruction storage exception (MMU)
+ *   - Data TLB miss exception (MMU)
+ *   - Instruction TLB miss exception (MMU)
+ *
  * Note we disable interrupts during exception handling, otherwise we will
  * possibly get multiple re-entrancy if interrupt handles themselves cause
  * exceptions. JW
@@ -71,9 +77,24 @@
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
+#ifndef CONFIG_MMU
 #define EX_HANDLER_STACK_SIZ	(4*19)
+#endif
 #define NUM_TO_REG(num)		r ## num
 
+#ifdef CONFIG_MMU
+/* FIXME you can't change first load of MSR because there is
+ * hardcoded jump bri 4 */
+	#define RESTORE_STATE			\
+		lwi	r3, r1, PT_R3;		\
+		lwi	r4, r1, PT_R4;		\
+		lwi	r5, r1, PT_R5;		\
+		lwi	r6, r1, PT_R6;		\
+		lwi	r11, r1, PT_R11;	\
+		lwi	r31, r1, PT_R31;	\
+		lwi	r1, r0, TOPHYS(r0_ram + 0);
+#endif /* CONFIG_MMU */
+
 #define LWREG_NOP			\
 	bri	ex_handler_unhandled;	\
 	nop;
@@ -106,6 +127,54 @@
 	or	r3, r0, NUM_TO_REG (regnum);		\
 	bri	ex_sw_tail;
 
+#ifdef CONFIG_MMU
+	#define R3_TO_LWREG_VM_V(regnum)		\
+		brid	ex_lw_end_vm;			\
+		swi	r3, r7, 4 * regnum;
+
+	#define R3_TO_LWREG_VM(regnum)			\
+		brid	ex_lw_end_vm;			\
+		or	NUM_TO_REG (regnum), r0, r3;
+
+	#define SWREG_TO_R3_VM_V(regnum)		\
+		brid	ex_sw_tail_vm;			\
+		lwi	r3, r7, 4 * regnum;
+
+	#define SWREG_TO_R3_VM(regnum)			\
+		brid	ex_sw_tail_vm;			\
+		or	r3, r0, NUM_TO_REG (regnum);
+
+	/* Shift right instruction depending on available configuration */
+	#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
+	#define BSRLI(rD, rA, imm)	\
+		bsrli rD, rA, imm
+	#elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
+	#define BSRLI(rD, rA, imm)	\
+		ori rD, r0, (1 << imm);	\
+		idivu rD, rD, rA
+	#else
+	#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
+	/* Only the used shift constants defined here - add more if needed */
+	#define BSRLI2(rD, rA)				\
+		srl rD, rA;		/* << 1 */	\
+		srl rD, rD;		/* << 2 */
+	#define BSRLI10(rD, rA)				\
+		srl rD, rA;		/* << 1 */	\
+		srl rD, rD;		/* << 2 */	\
+		srl rD, rD;		/* << 3 */	\
+		srl rD, rD;		/* << 4 */	\
+		srl rD, rD;		/* << 5 */	\
+		srl rD, rD;		/* << 6 */	\
+		srl rD, rD;		/* << 7 */	\
+		srl rD, rD;		/* << 8 */	\
+		srl rD, rD;		/* << 9 */	\
+		srl rD, rD		/* << 10 */
+	#define BSRLI20(rD, rA)		\
+		BSRLI10(rD, rA);	\
+		BSRLI10(rD, rD)
+	#endif
+#endif /* CONFIG_MMU */
+
 .extern other_exception_handler /* Defined in exception.c */
 
 /*
@@ -163,34 +232,119 @@
 
 /* wrappers to restore state before coming to entry.S */
 
+#ifdef CONFIG_MMU
+.section .rodata
+.align 4
+_MB_HW_ExceptionVectorTable:
+/*  0 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+/*  1 - Unaligned data access exception */
+	.long	TOPHYS(handle_unaligned_ex)
+/*  2 - Illegal op-code exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  3 - Instruction bus error exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  4 - Data bus error exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  5 - Divide by zero exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  6 - Floating point unit exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  7 - Privileged instruction exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  8 - 15 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+/* 16 - Data storage exception */
+	.long	TOPHYS(handle_data_storage_exception)
+/* 17 - Instruction storage exception */
+	.long	TOPHYS(handle_instruction_storage_exception)
+/* 18 - Data TLB miss exception */
+	.long	TOPHYS(handle_data_tlb_miss_exception)
+/* 19 - Instruction TLB miss exception */
+	.long	TOPHYS(handle_instruction_tlb_miss_exception)
+/* 20 - 31 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+#endif
+
 .global _hw_exception_handler
 .section .text
 .align 4
 .ent _hw_exception_handler
 _hw_exception_handler:
+#ifndef CONFIG_MMU
 	addik	r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
+#else
+	swi	r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
+	/* Save date to kernel memory. Here is the problem
+	 * when you came from user space */
+	ori	r1, r0, TOPHYS(r0_ram + 28);
+#endif
 	swi	r3, r1, PT_R3
 	swi	r4, r1, PT_R4
 	swi	r5, r1, PT_R5
 	swi	r6, r1, PT_R6
 
-	mfs	r5, rmsr;
+#ifdef CONFIG_MMU
-	nop
+	swi	r11, r1, PT_R11
-	swi	r5, r1, 0;
+	swi	r31, r1, PT_R31
-	mfs	r4, rbtr	/* Save BTR before jumping to handler */
+	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
-	nop
+#endif
+
 	mfs	r3, resr
 	nop
+	mfs	r4, rear;
+	nop
 
+#ifndef CONFIG_MMU
 	andi	r5, r3, 0x1000;		/* Check ESR[DS] */
 	beqi	r5, not_in_delay_slot;	/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
 not_in_delay_slot:
 	swi	r17, r1, PT_R17
+#endif
 
 	andi	r5, r3, 0x1F;		/* Extract ESR[EXC] */
 
+#ifdef CONFIG_MMU
+	/* Calculate exception vector offset = r5 << 2 */
+	addk	r6, r5, r5; /* << 1 */
+	addk	r6, r6, r6; /* << 2 */
+
+/* counting which exception happen */
+	lwi	r5, r0, 0x200 + TOPHYS(r0_ram)
+	addi	r5, r5, 1
+	swi	r5, r0, 0x200 + TOPHYS(r0_ram)
+	lwi	r5, r6, 0x200 + TOPHYS(r0_ram)
+	addi	r5, r5, 1
+	swi	r5, r6, 0x200 + TOPHYS(r0_ram)
+/* end */
+	/* Load the HW Exception vector */
+	lwi	r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
+	bra	r6
+
+full_exception_trapw:
+	RESTORE_STATE
+	bri	full_exception_trap
+#else
 	/* Exceptions enabled here. This will allow nested exceptions */
 	mfs	r6, rmsr;
 	nop
@@ -254,6 +408,7 @@ handle_other_ex: /* Handle Other exceptions here */
 	lwi	r18, r1, PT_R18
 
 	bri	ex_handler_done; /* Complete exception handling */
+#endif
 
 /* 0x01 - Unaligned data access exception
  * This occurs when a word access is not aligned on a word boundary,
@@ -265,11 +420,28 @@ handle_other_ex: /* Handle Other exceptions here */
 handle_unaligned_ex:
 	/* Working registers already saved: R3, R4, R5, R6
 	 *  R3 = ESR
-	 *  R4 = BTR
+	 *  R4 = EAR
 	 */
-	mfs	r4, rear;
+#ifdef CONFIG_MMU
+	andi	r6, r3, 0x1000			/* Check ESR[DS] */
+	beqi	r6, _no_delayslot		/* Branch if ESR[DS] not set */
+	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
+_no_delayslot:
+#endif
 
+#ifdef CONFIG_MMU
+	/* Check if unaligned address is last on a 4k page */
+		andi	r5, r4, 0xffc
+		xori	r5, r5, 0xffc
+		bnei	r5, _unaligned_ex2
+	_unaligned_ex1:
+		RESTORE_STATE;
+/* Another page must be accessed or physical address not in page table */
+		bri	unaligned_data_trap
+
+	_unaligned_ex2:
+#endif
 	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
 	srl	r6, r6;
@@ -278,6 +450,45 @@ handle_unaligned_ex:
 	srl	r6, r6;
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
+#ifdef CONFIG_MMU
+	/* Get physical address */
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	ori	r5, r0, CONFIG_KERNEL_START
+	cmpu	r5, r4, r5
+	bgti	r5, _unaligned_ex3
+	ori	r5, r0, swapper_pg_dir
+	bri	_unaligned_ex4
+
+	/* Get the PGD for the current thread. */
+_unaligned_ex3: /* user thread */
+	addi	r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
+	lwi	r5, r5, TASK_THREAD + PGDIR
+_unaligned_ex4:
+	tophys(r5,r5)
+	BSRLI(r6,r4,20)			/* Create L1 (pgdir/pmd) address */
+	andi	r6, r6, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
+	or	r5, r5, r6
+	lwi	r6, r5, 0		/* Get L1 entry */
+	andi	r5, r6, 0xfffff000	/* Extract L2 (pte) base address. */
+	beqi	r5, _unaligned_ex1	/* Bail if no table */
+
+	tophys(r5,r5)
+	BSRLI(r6,r4,10)			/* Compute PTE address */
+	andi	r6, r6, 0xffc
+	andi	r5, r5, 0xfffff003
+	or	r5, r5, r6
+	lwi	r5, r5, 0		/* Get Linux PTE */
+
+	andi	r6, r5, _PAGE_PRESENT
+	beqi	r6, _unaligned_ex1	/* Bail if no page */
+
+	andi	r5, r5, 0xfffff000	/* Extract RPN */
+	andi	r4, r4, 0x00000fff	/* Extract offset */
+	or	r4, r4, r5		/* Create physical address */
+#endif /* CONFIG_MMU */
 
 	andi	r6, r3, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
@@ -355,6 +566,7 @@ ex_shw:
 ex_sw_end: /* Exception handling of store word, ends. */
 
 ex_handler_done:
+#ifndef CONFIG_MMU
 	lwi	r5, r1, 0 /* RMSR */
 	mts	rmsr, r5
 	nop
@@ -366,13 +578,455 @@ ex_handler_done:
 
 	rted	r17, 0
 	addik	r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
+#else
+	RESTORE_STATE;
+	rted	r17, 0
+	nop
+#endif
 
+#ifdef CONFIG_MMU
+	/* Exception vector entry code. This code runs with address translation
+	 * turned off (i.e. using physical addresses). */
+
+	/* Exception vectors. */
+
+	/* 0x10 - Data Storage Exception
+	 * This happens for just a few reasons. U0 set (but we don't do that),
+	 * or zone protection fault (user violation, write to protected page).
+	 * If this is just an update of modified status, we do that quickly
+	 * and exit. Otherwise, we call heavyweight functions to do the work.
+	 */
+	handle_data_storage_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables.
+		 */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex3
+		/* First, check if it was a zone fault (which means a user
+		 * tried to access a kernel or read-protected page - always
+		 * a SEGV). All other faults here must be stores, so no
+		 * need to check ESR_S as well. */
+		mfs	r4, resr
+		nop
+		andi	r4, r4, 0x800		/* ESR_Z - zone protection */
+		bnei	r4, ex2
+
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex4
+
+		/* Get the PGD for the current thread. */
+	ex3:
+		/* First, check if it was a zone fault (which means a user
+		 * tried to access a kernel or read-protected page - always
+		 * a SEGV). All other faults here must be stores, so no
+		 * need to check ESR_S as well. */
+		mfs	r4, resr
+		nop
+		andi	r4, r4, 0x800		/* ESR_Z */
+		bnei	r4, ex2
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex4:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex2			/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_RW	/* Is it writeable? */
+		beqi	r6, ex2			/* Bail if not */
+
+		/* Update 'changed' */
+		ori	r4, r4, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+		swi	r4, r5, 0		/* Update Linux page table */
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
+
+		/* find the TLB index that caused the fault. It has to be here*/
+		mts	rtlbsx, r3
+		nop
+		mfs	r5, rtlbx		/* DEBUG: TBD */
+		nop
+		mts	rtlblo, r4		/* Load TLB LO */
+		nop
+						/* Will sync shadow TLBs */
+
+		/* Done...restore registers and get out of here. */
+		mts	rpid, r11
+		nop
+		bri 4
+
+		RESTORE_STATE;
+		rted	r17, 0
+		nop
+	ex2:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out. */
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		bri	page_fault_data_trap
+
+
+	/* 0x11 - Instruction Storage Exception
+	 * This is caused by a fetch from non-execute or guarded pages. */
+	handle_instruction_storage_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+
+		mfs	r3, rear		/* Get faulting address */
+		nop
+		RESTORE_STATE;
+		bri	page_fault_instr_trap
+
+	/* 0x12 - Data TLB Miss Exception
+	 * As the name implies, translation is not in the MMU, so search the
+	 * page tables and fix it. The only purpose of this function is to
+	 * load TLB entries from the page table if they exist.
+	 */
+	handle_data_tlb_miss_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables. */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex5
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex6
+
+		/* Get the PGD for the current thread. */
+	ex5:
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex6:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex7			/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_PRESENT
+		beqi	r6, ex7
+
+		ori	r4, r4, _PAGE_ACCESSED
+		swi	r4, r5, 0
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+
+		bri	finish_tlb_load
+	ex7:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out.
+		 */
+		mts	rpid, r11
+		nop
+		bri	4
+		RESTORE_STATE;
+		bri	page_fault_data_trap
+
+	/* 0x13 - Instruction TLB Miss Exception
+	 * Nearly the same as above, except we get our information from
+	 * different registers and bailout to a different point.
+	 */
+	handle_instruction_tlb_miss_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 *  R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables.
+		 */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex8
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex9
+
+		/* Get the PGD for the current thread. */
+	ex8:
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex9:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex10		/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_PRESENT
+		beqi	r6, ex7
+
+		ori	r4, r4, _PAGE_ACCESSED
+		swi	r4, r5, 0
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+
+		bri	finish_tlb_load
+	ex10:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out.
+		 */
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		bri	page_fault_instr_trap
+
+/* Both the instruction and data TLB miss get to this point to load the TLB.
+ *	r3 - EA of fault
+ *	r4 - TLB LO (info from Linux PTE)
+ *	r5, r6 - available to use
+ *	PID - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ * A common place to load the TLB.
+ */
+	tlb_index:
+		.long	1 /* MS: storing last used tlb index */
+	finish_tlb_load:
+		/* MS: load the last used TLB index. */
+		lwi	r5, r0, TOPHYS(tlb_index)
+		addik	r5, r5, 1 /* MS: inc tlb_index -> use next one */
+
+/* MS: FIXME this is potential fault, because this is mask not count */
+		andi	r5, r5, (MICROBLAZE_TLB_SIZE-1)
+		ori	r6, r0, 1
+		cmp	r31, r5, r6
+		blti	r31, sem
+		addik	r5, r6, 1
+	sem:
+		/* MS: save back current TLB index */
+		swi	r5, r0, TOPHYS(tlb_index)
+
+		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
+		mts	rtlbx, r5		/* MS: save current TLB */
+		nop
+		mts	rtlblo,	r4		/* MS: save to TLB LO */
+		nop
+
+		/* Create EPN. This is the faulting address plus a static
+		 * set of bits. These are size, valid, E, U0, and ensure
+		 * bits 20 and 21 are zero.
+		 */
+		andi	r3, r3, 0xfffff000
+		ori	r3, r3, 0x0c0
+		mts	rtlbhi,	r3		/* Load TLB HI */
+		nop
+
+		/* Done...restore registers and get out of here. */
+	ex12:
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		rted	r17, 0
+		nop
+
+	/* extern void giveup_fpu(struct task_struct *prev)
+	 *
+	 * The MicroBlaze processor may have an FPU, so this should not just
+	 * return: TBD.
+	 */
+	.globl giveup_fpu;
+	.align 4;
+	giveup_fpu:
+		bralid	r15,0			/* TBD */
+		nop
+
+	/* At present, this routine just hangs. - extern void abort(void) */
+	.globl abort;
+	.align 4;
+	abort:
+		br	r0
+
+	.globl set_context;
+	.align 4;
+	set_context:
+		mts	rpid, r5	/* Shadow TLBs are automatically */
+		nop
+		bri	4		/* flushed by changing PID */
+		rtsd	r15,8
+		nop
+
+#endif
 .end _hw_exception_handler
 
+#ifdef CONFIG_MMU
+/* Unaligned data access exception last on a 4k page for MMU.
+ * When this is called, we are in virtual mode with exceptions enabled
+ * and registers 1-13,15,17,18 saved.
+ *
+ * R3 = ESR
+ * R4 = EAR
+ * R7 = pointer to saved registers (struct pt_regs *regs)
+ *
+ * This handler perform the access, and returns via ret_from_exc.
+ */
+.global _unaligned_data_exception
+.ent _unaligned_data_exception
+_unaligned_data_exception:
+	andi	r8, r3, 0x3E0;	/* Mask and extract the register operand */
+	BSRLI(r8,r8,2);		/* r8 >> 2 = register operand * 8 */
+	andi	r6, r3, 0x400;	/* Extract ESR[S] */
+	bneid	r6, ex_sw_vm;
+	andi	r6, r3, 0x800;	/* Extract ESR[W] - delay slot */
+ex_lw_vm:
+	beqid	r6, ex_lhw_vm;
+	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
+/* Load a word, byte-by-byte from destination address and save it in tmp space*/
+	la	r6, r0, ex_tmp_data_loc_0;
+	sbi	r5, r6, 0;
+	lbui	r5, r4, 1;
+	sbi	r5, r6, 1;
+	lbui	r5, r4, 2;
+	sbi	r5, r6, 2;
+	lbui	r5, r4, 3;
+	sbi	r5, r6, 3;
+	brid	ex_lw_tail_vm;
+/* Get the destination register value into r3 - delay slot */
+	lwi	r3, r6, 0;
+ex_lhw_vm:
+	/* Load a half-word, byte-by-byte from destination address and
+	 * save it in tmp space */
+	la	r6, r0, ex_tmp_data_loc_0;
+	sbi	r5, r6, 0;
+	lbui	r5, r4, 1;
+	sbi	r5, r6, 1;
+	lhui	r3, r6, 0;	/* Get the destination register value into r3 */
+ex_lw_tail_vm:
+	/* Form load_word jump table offset (lw_table_vm + (8 * regnum)) */
+	addik	r5, r8, lw_table_vm;
+	bra	r5;
+ex_lw_end_vm:			/* Exception handling of load word, ends */
+	brai	ret_from_exc;
+ex_sw_vm:
+/* Form store_word jump table offset (sw_table_vm + (8 * regnum)) */
+	addik	r5, r8, sw_table_vm;
+	bra	r5;
+ex_sw_tail_vm:
+	la	r5, r0, ex_tmp_data_loc_0;
+	beqid	r6, ex_shw_vm;
+	swi	r3, r5, 0;	/* Get the word - delay slot */
+	/* Store the word, byte-by-byte into destination address */
+	lbui	r3, r5, 0;
+	sbi	r3, r4, 0;
+	lbui	r3, r5, 1;
+	sbi	r3, r4, 1;
+	lbui	r3, r5, 2;
+	sbi	r3, r4, 2;
+	lbui	r3, r5, 3;
+	brid	ret_from_exc;
+	sbi	r3, r4, 3;	/* Delay slot */
+ex_shw_vm:
+	/* Store the lower half-word, byte-by-byte into destination address */
+	lbui	r3, r5, 2;
+	sbi	r3, r4, 0;
+	lbui	r3, r5, 3;
+	brid	ret_from_exc;
+	sbi	r3, r4, 1;	/* Delay slot */
+ex_sw_end_vm:			/* Exception handling of store word, ends. */
+.end _unaligned_data_exception
+#endif /* CONFIG_MMU */
+
 ex_handler_unhandled:
 /* FIXME add handle function for unhandled exception - dump register */
 	bri 0
 
+/*
+ * hw_exception_handler Jump Table
+ * - Contains code snippets for each register that caused the unalign exception
+ * - Hence exception handler is NOT self-modifying
+ * - Separate table for load exceptions and store exceptions.
+ * - Each table is of size: (8 * 32) = 256 bytes
+ */
+
 .section .text
 .align 4
 lw_table:
@@ -407,7 +1061,11 @@ lw_r27:		R3_TO_LWREG	(27);
 lw_r28:		R3_TO_LWREG	(28);
 lw_r29:		R3_TO_LWREG	(29);
 lw_r30:		R3_TO_LWREG	(30);
+#ifdef CONFIG_MMU
+lw_r31: 	R3_TO_LWREG_V	(31);
+#else
 lw_r31:		R3_TO_LWREG	(31);
+#endif
 
 sw_table:
 sw_r0:		SWREG_TO_R3	(0);
@@ -441,7 +1099,81 @@ sw_r27:		SWREG_TO_R3	(27);
 sw_r28:		SWREG_TO_R3	(28);
 sw_r29:		SWREG_TO_R3	(29);
 sw_r30:		SWREG_TO_R3	(30);
+#ifdef CONFIG_MMU
+sw_r31:		SWREG_TO_R3_V	(31);
+#else
 sw_r31:		SWREG_TO_R3	(31);
+#endif
+
+#ifdef CONFIG_MMU
+lw_table_vm:
+lw_r0_vm:	R3_TO_LWREG_VM		(0);
+lw_r1_vm:	R3_TO_LWREG_VM_V	(1);
+lw_r2_vm:	R3_TO_LWREG_VM_V	(2);
+lw_r3_vm:	R3_TO_LWREG_VM_V	(3);
+lw_r4_vm:	R3_TO_LWREG_VM_V	(4);
+lw_r5_vm:	R3_TO_LWREG_VM_V	(5);
+lw_r6_vm:	R3_TO_LWREG_VM_V	(6);
+lw_r7_vm:	R3_TO_LWREG_VM_V	(7);
+lw_r8_vm:	R3_TO_LWREG_VM_V	(8);
+lw_r9_vm:	R3_TO_LWREG_VM_V	(9);
+lw_r10_vm:	R3_TO_LWREG_VM_V	(10);
+lw_r11_vm:	R3_TO_LWREG_VM_V	(11);
+lw_r12_vm:	R3_TO_LWREG_VM_V	(12);
+lw_r13_vm:	R3_TO_LWREG_VM_V	(13);
+lw_r14_vm:	R3_TO_LWREG_VM		(14);
+lw_r15_vm:	R3_TO_LWREG_VM_V	(15);
+lw_r16_vm:	R3_TO_LWREG_VM		(16);
+lw_r17_vm:	R3_TO_LWREG_VM_V	(17);
+lw_r18_vm:	R3_TO_LWREG_VM_V	(18);
+lw_r19_vm:	R3_TO_LWREG_VM		(19);
+lw_r20_vm:	R3_TO_LWREG_VM		(20);
+lw_r21_vm:	R3_TO_LWREG_VM		(21);
+lw_r22_vm:	R3_TO_LWREG_VM		(22);
+lw_r23_vm:	R3_TO_LWREG_VM		(23);
+lw_r24_vm:	R3_TO_LWREG_VM		(24);
+lw_r25_vm:	R3_TO_LWREG_VM		(25);
+lw_r26_vm:	R3_TO_LWREG_VM		(26);
+lw_r27_vm:	R3_TO_LWREG_VM		(27);
+lw_r28_vm:	R3_TO_LWREG_VM		(28);
+lw_r29_vm:	R3_TO_LWREG_VM		(29);
+lw_r30_vm:	R3_TO_LWREG_VM		(30);
+lw_r31_vm:	R3_TO_LWREG_VM_V	(31);
+
+sw_table_vm:
+sw_r0_vm:	SWREG_TO_R3_VM		(0);
+sw_r1_vm:	SWREG_TO_R3_VM_V	(1);
+sw_r2_vm:	SWREG_TO_R3_VM_V	(2);
+sw_r3_vm:	SWREG_TO_R3_VM_V	(3);
+sw_r4_vm:	SWREG_TO_R3_VM_V	(4);
+sw_r5_vm:	SWREG_TO_R3_VM_V	(5);
+sw_r6_vm:	SWREG_TO_R3_VM_V	(6);
+sw_r7_vm:	SWREG_TO_R3_VM_V	(7);
+sw_r8_vm:	SWREG_TO_R3_VM_V	(8);
+sw_r9_vm:	SWREG_TO_R3_VM_V	(9);
+sw_r10_vm:	SWREG_TO_R3_VM_V	(10);
+sw_r11_vm:	SWREG_TO_R3_VM_V	(11);
+sw_r12_vm:	SWREG_TO_R3_VM_V	(12);
+sw_r13_vm:	SWREG_TO_R3_VM_V	(13);
+sw_r14_vm:	SWREG_TO_R3_VM		(14);
+sw_r15_vm:	SWREG_TO_R3_VM_V	(15);
+sw_r16_vm:	SWREG_TO_R3_VM		(16);
+sw_r17_vm:	SWREG_TO_R3_VM_V	(17);
+sw_r18_vm:	SWREG_TO_R3_VM_V	(18);
+sw_r19_vm:	SWREG_TO_R3_VM		(19);
+sw_r20_vm:	SWREG_TO_R3_VM		(20);
+sw_r21_vm:	SWREG_TO_R3_VM		(21);
+sw_r22_vm:	SWREG_TO_R3_VM		(22);
+sw_r23_vm:	SWREG_TO_R3_VM		(23);
+sw_r24_vm:	SWREG_TO_R3_VM		(24);
+sw_r25_vm:	SWREG_TO_R3_VM		(25);
+sw_r26_vm:	SWREG_TO_R3_VM		(26);
+sw_r27_vm:	SWREG_TO_R3_VM		(27);
+sw_r28_vm:	SWREG_TO_R3_VM		(28);
+sw_r29_vm:	SWREG_TO_R3_VM		(29);
+sw_r30_vm:	SWREG_TO_R3_VM		(30);
+sw_r31_vm:	SWREG_TO_R3_VM_V	(31);
+#endif /* CONFIG_MMU */
 
 /* Temporary data structures used in the handler */
 .section .data

arch/microblaze/kernel/microblaze_ksyms.c

@@ -45,3 +45,5 @@ extern void __udivsi3(void);
 EXPORT_SYMBOL(__udivsi3);
 extern void __umodsi3(void);
 EXPORT_SYMBOL(__umodsi3);
+extern char *_ebss;
+EXPORT_SYMBOL_GPL(_ebss);

arch/microblaze/kernel/misc.S

@@ -0,0 +1,120 @@
+/*
+ * Miscellaneous low-level MMU functions.
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ * Derived from arch/ppc/kernel/misc.S
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+	.text
+/*
+ * Flush MMU TLB
+ *
+ * We avoid flushing the pinned 0, 1 and possibly 2 entries.
+ */
+.globl _tlbia;
+.align 4;
+_tlbia:
+	addik	r12, r0, 63 /* flush all entries (63 - 3) */
+	/* isync */
+_tlbia_1:
+	mts	rtlbx, r12
+	nop
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+	addik	r11, r12, -2
+	bneid	r11, _tlbia_1 /* loop for all entries */
+	addik	r12, r12, -1
+	/* sync */
+	rtsd	r15, 8
+	nop
+
+/*
+ * Flush MMU TLB for a particular address (in r5)
+ */
+.globl _tlbie;
+.align 4;
+_tlbie:
+	mts	rtlbsx, r5 /* look up the address in TLB */
+	nop
+	mfs	r12, rtlbx /* Retrieve index */
+	nop
+	blti	r12, _tlbie_1 /* Check if found */
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+_tlbie_1:
+	rtsd	r15, 8
+	nop
+
+/*
+ * Allocate TLB entry for early console
+ */
+.globl early_console_reg_tlb_alloc;
+.align 4;
+early_console_reg_tlb_alloc:
+	/*
+	 * Load a TLB entry for the UART, so that microblaze_progress() can use
+	 * the UARTs nice and early.  We use a 4k real==virtual mapping.
+	 */
+	ori	r4, r0, 63
+	mts	rtlbx, r4 /* TLB slot 2 */
+
+	or	r4,r5,r0
+	andi	r4,r4,0xfffff000
+	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+	andi	r5,r5,0xfffff000
+	ori	r5,r5,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4 /* Load the data portion of the entry */
+	nop
+	mts	rtlbhi,r5 /* Load the tag portion of the entry */
+	nop
+	rtsd	r15, 8
+	nop
+
+/*
+ * Copy a whole page (4096 bytes).
+ */
+#define COPY_16_BYTES		\
+	lwi	r7, r6, 0;	\
+	lwi	r8, r6, 4;	\
+	lwi	r9, r6, 8;	\
+	lwi	r10, r6, 12;	\
+	swi	r7, r5, 0;	\
+	swi	r8, r5, 4;	\
+	swi	r9, r5, 8;	\
+	swi	r10, r5, 12
+
+
+/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
+#define DCACHE_LINE_BYTES (4 * 4)
+
+.globl copy_page;
+.align 4;
+copy_page:
+	ori	r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
+_copy_page_loop:
+	COPY_16_BYTES
+#if DCACHE_LINE_BYTES >= 32
+	COPY_16_BYTES
+#endif
+	addik	r6, r6, DCACHE_LINE_BYTES
+	addik	r5, r5, DCACHE_LINE_BYTES
+	bneid	r11, _copy_page_loop
+	addik	r11, r11, -1
+	rtsd	r15, 8
+	nop

arch/microblaze/kernel/process.c

@@ -126,9 +126,54 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	else
 		childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
 
+#ifndef CONFIG_MMU
 	memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
 	ti->cpu_context.r1 = (unsigned long)childregs;
 	ti->cpu_context.msr = (unsigned long)childregs->msr;
+#else
+
+	/* if creating a kernel thread then update the current reg (we don't
+	 * want to use the parent's value when restoring by POP_STATE) */
+	if (kernel_mode(regs))
+		/* save new current on stack to use POP_STATE */
+		childregs->CURRENT_TASK = (unsigned long)p;
+	/* if returning to user then use the parent's value of this register */
+
+	/* if we're creating a new kernel thread then just zeroing all
+	 * the registers. That's OK for a brand new thread.*/
+	/* Pls. note that some of them will be restored in POP_STATE */
+	if (kernel_mode(regs))
+		memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+	/* if this thread is created for fork/vfork/clone, then we want to
+	 * restore all the parent's context */
+	/* in addition to the registers which will be restored by POP_STATE */
+	else {
+		ti->cpu_context = *(struct cpu_context *)regs;
+		childregs->msr |= MSR_UMS;
+	}
+
+	/* FIXME STATE_SAVE_PT_OFFSET; */
+	ti->cpu_context.r1  = (unsigned long)childregs - STATE_SAVE_ARG_SPACE;
+	/* we should consider the fact that childregs is a copy of the parent
+	 * regs which were saved immediately after entering the kernel state
+	 * before enabling VM. This MSR will be restored in switch_to and
+	 * RETURN() and we want to have the right machine state there
+	 * specifically this state must have INTs disabled before and enabled
+	 * after performing rtbd
+	 * compose the right MSR for RETURN(). It will work for switch_to also
+	 * excepting for VM and UMS
+	 * don't touch UMS , CARRY and cache bits
+	 * right now MSR is a copy of parent one */
+	childregs->msr |= MSR_BIP;
+	childregs->msr &= ~MSR_EIP;
+	childregs->msr |= MSR_IE;
+	childregs->msr &= ~MSR_VM;
+	childregs->msr |= MSR_VMS;
+	childregs->msr |= MSR_EE; /* exceptions will be enabled*/
+
+	ti->cpu_context.msr = (childregs->msr|MSR_VM);
+	ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+#endif
 	ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
 
 	if (clone_flags & CLONE_SETTLS)
@@ -137,6 +182,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	return 0;
 }
 
+#ifndef CONFIG_MMU
 /*
  * Return saved PC of a blocked thread.
  */
@@ -151,6 +197,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	else
 		return ctx->r14;
 }
+#endif
 
 static void kernel_thread_helper(int (*fn)(void *), void *arg)
 {
@@ -173,6 +220,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 			&regs, 0, NULL, NULL);
 }
+EXPORT_SYMBOL_GPL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *p)
 {
@@ -188,3 +236,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 	regs->r1 = usp;
 	regs->pt_mode = 0;
 }
+
+#ifdef CONFIG_MMU
+#include <linux/elfcore.h>
+/*
+ * Set up a thread for executing a new program
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+	return 0; /* MicroBlaze has no separate FPU registers */
+}
+#endif /* CONFIG_MMU */

arch/microblaze/kernel/prom.c

@@ -509,12 +509,13 @@ static void __init early_init_dt_check_for_initrd(unsigned long node)
 
 	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
 	if (prop) {
-		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+		initrd_start = (unsigned long)
+					__va((u32)of_read_ulong(prop, l/4));
 
 		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
 		if (prop) {
 			initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, l/4));
+					__va((u32)of_read_ulong(prop, 1/4));
 			initrd_below_start_ok = 1;
 		} else {
 			initrd_start = 0;
@@ -563,7 +564,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
 
 #ifdef CONFIG_CMDLINE
+#ifndef CONFIG_CMDLINE_FORCE
 	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+#endif
 		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 #endif /* CONFIG_CMDLINE */
 

arch/microblaze/kernel/setup.c

@@ -42,10 +42,6 @@ char cmd_line[COMMAND_LINE_SIZE];
 
 void __init setup_arch(char **cmdline_p)
 {
-#ifdef CONFIG_CMDLINE_FORCE
-	strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-	strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
 	*cmdline_p = cmd_line;
 
 	console_verbose();
@@ -102,14 +98,34 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 {
 	unsigned long *src, *dst = (unsigned long *)0x0;
 
+	/* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the
+	 * end of kernel. There are two position which we want to check.
+	 * The first is __init_end and the second __bss_start.
+	 */
+#ifdef CONFIG_MTD_UCLINUX
+	int romfs_size;
+	unsigned int romfs_base;
+	char *old_klimit = klimit;
+
+	romfs_base = (ram ? ram : (unsigned int)&__init_end);
+	romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	if (!romfs_size) {
+		romfs_base = (unsigned int)&__bss_start;
+		romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	}
+
+	/* Move ROMFS out of BSS before clearing it */
+	if (romfs_size > 0) {
+		memmove(&_ebss, (int *)romfs_base, romfs_size);
+		klimit += romfs_size;
+	}
+#endif
+
 /* clearing bss section */
 	memset(__bss_start, 0, __bss_stop-__bss_start);
 	memset(_ssbss, 0, _esbss-_ssbss);
 
-	/*
+	/* Copy command line passed from bootloader */
-	 * Copy command line passed from bootloader, or use default
-	 * if none provided, or forced
-	 */
 #ifndef CONFIG_CMDLINE_BOOL
 	if (cmdline && cmdline[0] != '\0')
 		strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
@@ -126,27 +142,15 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
 
 #ifdef CONFIG_MTD_UCLINUX
-	{
-		int size;
-		unsigned int romfs_base;
-		romfs_base = (ram ? ram : (unsigned int)&__init_end);
-		/* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the
-		 * end of kernel, which is ROMFS_LOCATION defined above. */
-		size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
 	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
-				romfs_base, size);
+			romfs_base, romfs_size);
-		early_printk("#### klimit %p ####\n", klimit);
+	early_printk("#### klimit %p ####\n", old_klimit);
-		BUG_ON(size < 0); /* What else can we do? */
+	BUG_ON(romfs_size < 0); /* What else can we do? */
 
-		/* Use memmove to handle likely case of memory overlap */
+	early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
-		early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n",
+			romfs_size, romfs_base, (unsigned)&_ebss);
-			size, romfs_base, (unsigned)&_ebss);
-		memmove(&_ebss, (int *)romfs_base, size);
 
-		/* update klimit */
-		klimit += PAGE_ALIGN(size);
 	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
-	}
 #endif
 
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)

arch/microblaze/kernel/signal.c

@@ -152,8 +152,8 @@ struct rt_sigframe {
 	unsigned long tramp[2];	/* signal trampoline */
 };
 
-static int
+static int restore_sigcontext(struct pt_regs *regs,
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
+				struct sigcontext __user *sc, int *rval_p)
 {
 	unsigned int err = 0;
 
@@ -211,11 +211,10 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs)
 
 asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 {
-	struct rt_sigframe *frame =
+	struct rt_sigframe __user *frame =
-			(struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
 
 	sigset_t set;
-	stack_t st;
 	int rval;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -233,11 +232,10 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
 		goto badframe;
 
-	if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	 call it and ignore errors. */
-	do_sigaltstack(&st, NULL, regs->r1);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+		goto badframe;
 
 	return rval;
 
@@ -251,7 +249,7 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
  */
 
 static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		unsigned long mask)
 {
 	int err = 0;
@@ -278,7 +276,7 @@ setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
 /*
  * Determine which stack to use..
  */
-static inline void *
+static inline void __user *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
 	/* Default to using normal stack */
@@ -287,87 +285,13 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	return (void *)((sp - frame_size) & -8UL);
+	return (void __user *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-					sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace. If provided, use a stub
-	 already in userspace. */
-	/* minus 8 is offset to cater for "rtsd r15,8" offset */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* Note, these encodings are _big endian_! */
-
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
-
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
-
-	/* Signal handler args: */
-	regs->r5 = signal; /* Arg 0: signum */
-	regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
-
-	/* Offset of 4 to handle microblaze rtid r14, 0 */
-	regs->pc = (unsigned long)ka->sa.sa_handler;
-
-	set_fs(USER_DS);
-
-#ifdef DEBUG_SIG
-	printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
-		current->comm, current->pid, frame, regs->pc);
-#endif
-
-	return;
-
-give_sigsegv:
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	force_sig(SIGSEGV, current);
 }
 
 static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			sigset_t *set, struct pt_regs *regs)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 	int signal;
 
@@ -382,6 +306,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		? current_thread_info()->exec_domain->signal_invmap[sig]
 		: sig;
 
+	if (info)
 		err |= copy_siginfo_to_user(&frame->info, info);
 
 	/* Create the ucontext. */
@@ -463,7 +388,15 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 	case -ERESTARTNOINTR:
 do_restart:
 		/* offset of 4 bytes to re-execute trap (brki) instruction */
+#ifndef CONFIG_MMU
 		regs->pc -= 4;
+#else
+		/* offset of 8 bytes required = 4 for rtbd
+		   offset, plus 4 for size of
+			"brki r14,8"
+		   instruction. */
+		regs->pc -= 8;
+#endif
 		break;
 	}
 }
@@ -480,7 +413,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	if (ka->sa.sa_flags & SA_SIGINFO)
 		setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		setup_frame(sig, ka, oldset, regs);
+		setup_rt_frame(sig, ka, NULL, oldset, regs);
 
 	if (ka->sa.sa_flags & SA_ONESHOT)
 		ka->sa.sa_handler = SIG_DFL;

arch/microblaze/kernel/syscall_table.S

@@ -2,7 +2,11 @@ ENTRY(sys_call_table)
 	.long sys_restart_syscall	/* 0 - old "setup()" system call,
 					 * used for restarting */
 	.long sys_exit
-	.long sys_ni_syscall		/* was fork */
+#ifdef CONFIG_MMU
+	.long sys_fork_wrapper
+#else
+	.long sys_ni_syscall
+#endif
 	.long sys_read
 	.long sys_write
 	.long sys_open			/* 5 */

arch/microblaze/kernel/traps.c

@@ -22,14 +22,6 @@ void trap_init(void)
 	__enable_hw_exceptions();
 }
 
-void __bad_xchg(volatile void *ptr, int size)
-{
-	printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
-		__builtin_return_address(0), ptr, size);
-	BUG();
-}
-EXPORT_SYMBOL(__bad_xchg);
-
 static int kstack_depth_to_print = 24;
 
 static int __init kstack_setup(char *s)
@@ -105,3 +97,37 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data)
+{
+	if (data)
+		printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
+			file, line, data);
+	else
+		printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
+
+	machine_halt();
+}
+
+int bad_trap(int trap_num, struct pt_regs *regs)
+{
+	printk(KERN_CRIT
+		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
+		trap_num, regs->pc, current->pid);
+	return -ENOSYS;
+}
+
+int debug_trap(struct pt_regs *regs)
+{
+	int i;
+	printk(KERN_CRIT "debug trap\n");
+	for (i = 0; i < 32; i++) {
+		/* printk("r%i:%08X\t",i,regs->gpr[i]); */
+		if ((i % 4) == 3)
+			printk(KERN_CRIT "\n");
+	}
+	printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
+	return -ENOSYS;
+}
+#endif

arch/microblaze/kernel/vmlinux.lds.S

@@ -17,8 +17,7 @@ ENTRY(_start)
 jiffies = jiffies_64 + 4;
 
 SECTIONS {
-	. = CONFIG_KERNEL_BASE_ADDR;
+	. = CONFIG_KERNEL_START;
-
 	.text : {
 		_text = . ;
 		_stext = . ;
@@ -132,6 +131,8 @@ SECTIONS {
 		__con_initcall_end = .;
 	}
 
+	SECURITY_INIT
+
 	__init_end_before_initramfs = .;
 
 	.init.ramfs ALIGN(4096) : {

arch/microblaze/lib/Makefile

@@ -10,4 +10,5 @@ else
 lib-y += memcpy.o memmove.o
 endif
 
-lib-y +=  uaccess.o
+lib-$(CONFIG_NO_MMU) += uaccess.o
+lib-$(CONFIG_MMU) += uaccess_old.o

arch/microblaze/lib/checksum.c

@@ -32,9 +32,10 @@
 /* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
  kills, so most of the assembly has to go. */
 
-#include <net/checksum.h>
-#include <asm/checksum.h>
 #include <linux/module.h>
+#include <net/checksum.h>
+
+#include <asm/byteorder.h>
 
 static inline unsigned short from32to16(unsigned long x)
 {
@@ -102,6 +103,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph, ihl*4);
 }
+EXPORT_SYMBOL(ip_fast_csum);
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -115,15 +117,16 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
  *
  * it's best to have buff aligned on a 32-bit boundary
  */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
+__wsum csum_partial(const void *buff, int len, __wsum wsum)
 {
+	unsigned int sum = (__force unsigned int)wsum;
 	unsigned int result = do_csum(buff, len);
 
 	/* add in old sum, and carry.. */
 	result += sum;
 	if (sum > result)
 		result += 1;
-	return result;
+	return (__force __wsum)result;
 }
 EXPORT_SYMBOL(csum_partial);
 
@@ -131,9 +134,9 @@ EXPORT_SYMBOL(csum_partial);
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-__sum16 ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
 {
-	return ~do_csum(buff, len);
+	return (__force __sum16)~do_csum(buff, len);
 }
 EXPORT_SYMBOL(ip_compute_csum);
 
@@ -141,12 +144,18 @@ EXPORT_SYMBOL(ip_compute_csum);
  * copy from fs while checksumming, otherwise like csum_partial
  */
 __wsum
-csum_partial_copy_from_user(const char __user *src, char *dst, int len,
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-						int sum, int *csum_err)
+						__wsum sum, int *csum_err)
 {
-	if (csum_err)
+	int missing;
+
+	missing = __copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*csum_err = -EFAULT;
+	} else
 		*csum_err = 0;
-	memcpy(dst, src, len);
+
 	return csum_partial(dst, len, sum);
 }
 EXPORT_SYMBOL(csum_partial_copy_from_user);
@@ -155,7 +164,7 @@ EXPORT_SYMBOL(csum_partial_copy_from_user);
  * copy from ds while checksumming, otherwise like csum_partial
  */
 __wsum
-csum_partial_copy(const char *src, char *dst, int len, int sum)
+csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
 {
 	memcpy(dst, src, len);
 	return csum_partial(dst, len, sum);

arch/microblaze/lib/memcpy.c

@@ -154,8 +154,3 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 }
 EXPORT_SYMBOL(memcpy);
 #endif /* __HAVE_ARCH_MEMCPY */
-
-void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c)
-{
-	return memcpy(d, s, c);
-}

arch/microblaze/lib/uaccess_old.S

@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2007 LynuxWorks, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+
+/*
+ * int __strncpy_user(char *to, char *from, int len);
+ *
+ * Returns:
+ *  -EFAULT  for an exception
+ *  len      if we hit the buffer limit
+ *  bytes copied
+ */
+
+	.text
+.globl __strncpy_user;
+.align 4;
+__strncpy_user:
+
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7 - len
+	 * r3 - temp count
+	 * r4 - temp val
+	 */
+	addik	r3,r7,0		/* temp_count = len */
+	beqi	r3,3f
+1:
+	lbu	r4,r6,r0
+	sb	r4,r5,r0
+
+	addik	r3,r3,-1
+	beqi	r3,2f		/* break on len */
+
+	addik	r5,r5,1
+	bneid	r4,1b
+	addik	r6,r6,1		/* delay slot */
+	addik	r3,r3,1		/* undo "temp_count--" */
+2:
+	rsubk	r3,r3,r7	/* temp_count = len - temp_count */
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	.fixup, "ax"
+	.align	2
+4:
+	brid	3b
+	addik	r3,r0, -EFAULT
+
+	.section	__ex_table, "a"
+	.word	1b,4b
+
+/*
+ * int __strnlen_user(char __user *str, int maxlen);
+ *
+ * Returns:
+ *  0 on error
+ *  maxlen + 1  if no NUL byte found within maxlen bytes
+ *  size of the string (including NUL byte)
+ */
+
+	.text
+.globl __strnlen_user;
+.align 4;
+__strnlen_user:
+	addik	r3,r6,0
+	beqi	r3,3f
+1:
+	lbu	r4,r5,r0
+	beqid	r4,2f		/* break on NUL */
+	addik	r3,r3,-1	/* delay slot */
+
+	bneid	r3,1b
+	addik	r5,r5,1		/* delay slot */
+
+	addik	r3,r3,-1	/* for break on len */
+2:
+	rsubk	r3,r3,r6
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	.fixup,"ax"
+4:
+	brid	3b
+	addk	r3,r0,r0
+
+	.section	__ex_table,"a"
+	.word	1b,4b
+
+/*
+ * int __copy_tofrom_user(char *to, char *from, int len)
+ * Return:
+ *   0 on success
+ *   number of not copied bytes on error
+ */
+	.text
+.globl __copy_tofrom_user;
+.align 4;
+__copy_tofrom_user:
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7, r3 - count
+	 * r4 - tempval
+	 */
+	addik	r3,r7,0
+	beqi	r3,3f
+1:
+	lbu	r4,r6,r0
+	addik	r6,r6,1
+2:
+	sb	r4,r5,r0
+	addik	r3,r3,-1
+	bneid	r3,1b
+	addik	r5,r5,1		/* delay slot */
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	__ex_table,"a"
+	.word	1b,3b,2b,3b

arch/microblaze/mm/Makefile

@@ -3,3 +3,5 @@
 #
 
 obj-y := init.o
+
+obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o

arch/microblaze/mm/fault.c

@@ -0,0 +1,304 @@
+/*
+ *  arch/microblaze/mm/fault.c
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from "arch/ppc/mm/fault.c"
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/i386/mm/fault.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  Modified by Cort Dougan and Paul Mackerras.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <asm/exceptions.h>
+
+#if defined(CONFIG_KGDB)
+int debugger_kernel_faults = 1;
+#endif
+
+static unsigned long pte_misses;	/* updated by do_page_fault() */
+static unsigned long pte_errors;	/* updated by do_page_fault() */
+
+/*
+ * Check whether the instruction at regs->pc is a store using
+ * an update addressing form which will update r1.
+ */
+static int store_updates_sp(struct pt_regs *regs)
+{
+	unsigned int inst;
+
+	if (get_user(inst, (unsigned int *)regs->pc))
+		return 0;
+	/* check for 1 in the rD field */
+	if (((inst >> 21) & 0x1f) != 1)
+		return 0;
+	/* check for store opcodes */
+	if ((inst & 0xd0000000) == 0xd0000000)
+		return 1;
+	return 0;
+}
+
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from do_page_fault above and from some of the procedures
+ * in traps.c.
+ */
+static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+	const struct exception_table_entry *fixup;
+/* MS: no context */
+	/* Are we prepared to handle this fault?  */
+	fixup = search_exception_tables(regs->pc);
+	if (fixup) {
+		regs->pc = fixup->fixup;
+		return;
+	}
+
+	/* kernel has accessed a bad area */
+#if defined(CONFIG_KGDB)
+	if (debugger_kernel_faults)
+		debugger(regs);
+#endif
+	die("kernel access of bad area", regs, sig);
+}
+
+/*
+ * The error_code parameter is ESR for a data fault,
+ * 0 for an instruction fault.
+ */
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	siginfo_t info;
+	int code = SEGV_MAPERR;
+	int is_write = error_code & ESR_S;
+	int fault;
+
+	regs->ear = address;
+	regs->esr = error_code;
+
+	/* On a kernel SLB miss we can only check for a valid exception entry */
+	if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+		printk(KERN_WARNING "kernel task_size exceed");
+		_exception(SIGSEGV, regs, code, address);
+	}
+
+	/* for instr TLB miss and instr storage exception ESR_S is undefined */
+	if ((error_code & 0x13) == 0x13 || (error_code & 0x11) == 0x11)
+		is_write = 0;
+
+#if defined(CONFIG_KGDB)
+	if (debugger_fault_handler && regs->trap == 0x300) {
+		debugger_fault_handler(regs);
+		return;
+	}
+#endif /* CONFIG_KGDB */
+
+	if (in_atomic() || mm == NULL) {
+		/* FIXME */
+		if (kernel_mode(regs)) {
+			printk(KERN_EMERG
+				"Page fault in kernel mode - Oooou!!! pid %d\n",
+				current->pid);
+			_exception(SIGSEGV, regs, code, address);
+			return;
+		}
+		/* in_atomic() in user mode is really bad,
+		   as is current->mm == NULL. */
+		printk(KERN_EMERG "Page fault in user mode with "
+		       "in_atomic(), mm = %p\n", mm);
+		printk(KERN_EMERG "r15 = %lx  MSR = %lx\n",
+		       regs->r15, regs->msr);
+		die("Weird page fault", regs, SIGSEGV);
+	}
+
+	/* When running in the kernel we expect faults to occur only to
+	 * addresses in user space.  All other faults represent errors in the
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
+	 * erroneous fault occurring in a code path which already holds mmap_sem
+	 * we will deadlock attempting to validate the fault against the
+	 * address space.  Luckily the kernel only validly references user
+	 * space from well defined areas of code, which are listed in the
+	 * exceptions table.
+	 *
+	 * As the vast majority of faults will be valid we will only perform
+	 * the source reference check when there is a possibility of a deadlock.
+	 * Attempt to lock the address space, if we cannot we then validate the
+	 * source.  If this is invalid we can skip the address space check,
+	 * thus avoiding the deadlock.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if (kernel_mode(regs) && !search_exception_tables(regs->pc))
+			goto bad_area_nosemaphore;
+
+		down_read(&mm->mmap_sem);
+	}
+
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+
+	if (vma->vm_start <= address)
+		goto good_area;
+
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (!is_write)
+		goto bad_area;
+
+	/*
+	 * N.B. The ABI allows programs to access up to
+	 * a few hundred bytes below the stack pointer (TBD).
+	 * The kernel signal delivery code writes up to about 1.5kB
+	 * below the stack pointer (r1) before decrementing it.
+	 * The exec code can write slightly over 640kB to the stack
+	 * before setting the user r1.  Thus we allow the stack to
+	 * expand to 1MB without further checks.
+	 */
+	if (address + 0x100000 < vma->vm_end) {
+
+		/* get user regs even if this fault is in kernel mode */
+		struct pt_regs *uregs = current->thread.regs;
+		if (uregs == NULL)
+			goto bad_area;
+
+		/*
+		 * A user-mode access to an address a long way below
+		 * the stack pointer is only valid if the instruction
+		 * is one which would update the stack pointer to the
+		 * address accessed if the instruction completed,
+		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+		 * (or the byte, halfword, float or double forms).
+		 *
+		 * If we don't check this then any write to the area
+		 * between the last mapped region and the stack will
+		 * expand the stack rather than segfaulting.
+		 */
+		if (address + 2048 < uregs->r1
+			&& (kernel_mode(regs) || !store_updates_sp(regs)))
+				goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+good_area:
+	code = SEGV_ACCERR;
+
+	/* a write */
+	if (is_write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	/* a read */
+	} else {
+		/* protection fault */
+		if (error_code & 0x08000000)
+			goto bad_area;
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+survive:
+	fault = handle_mm_fault(mm, vma, address, is_write);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		current->maj_flt++;
+	else
+		current->min_flt++;
+	up_read(&mm->mmap_sem);
+	/*
+	 * keep track of tlb+htab misses that are good addrs but
+	 * just need pte's created via handle_mm_fault()
+	 * -- Cort
+	 */
+	pte_misses++;
+	return;
+
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	pte_errors++;
+
+	/* User mode accesses cause a SIGSEGV */
+	if (user_mode(regs)) {
+		_exception(SIGSEGV, regs, code, address);
+/*		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		info.si_code = code;
+		info.si_addr = (void *) address;
+		force_sig_info(SIGSEGV, &info, current);*/
+		return;
+	}
+
+	bad_page_fault(regs, address, SIGSEGV);
+	return;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	if (current->pid == 1) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	up_read(&mm->mmap_sem);
+	printk(KERN_WARNING "VM: killing process %s\n", current->comm);
+	if (user_mode(regs))
+		do_exit(SIGKILL);
+	bad_page_fault(regs, address, SIGKILL);
+	return;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+	if (user_mode(regs)) {
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = BUS_ADRERR;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
+		return;
+	}
+	bad_page_fault(regs, address, SIGBUS);
+}

arch/microblaze/mm/init.c

@@ -23,8 +23,16 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+#ifndef CONFIG_MMU
 unsigned int __page_offset;
-/* EXPORT_SYMBOL(__page_offset); */
+EXPORT_SYMBOL(__page_offset);
+
+#else
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+int mem_init_done;
+static int init_bootmem_done;
+#endif /* CONFIG_MMU */
 
 char *klimit = _end;
 
@@ -32,28 +40,26 @@ char *klimit = _end;
  * Initialize the bootmem system and give it all the memory we
  * have available.
  */
-unsigned int memory_start;
+unsigned long memory_start;
-unsigned int memory_end; /* due to mm/nommu.c */
+unsigned long memory_end; /* due to mm/nommu.c */
-unsigned int memory_size;
+unsigned long memory_size;
 
 /*
  * paging_init() sets up the page tables - in fact we've already done this.
  */
 static void __init paging_init(void)
 {
-	int i;
 	unsigned long zones_size[MAX_NR_ZONES];
 
+	/* Clean every zones */
+	memset(zones_size, 0, sizeof(zones_size));
+
 	/*
 	 * old: we can DMA to/from any address.put all page into ZONE_DMA
 	 * We use only ZONE_NORMAL
 	 */
 	zones_size[ZONE_NORMAL] = max_mapnr;
 
-	/* every other zones are empty */
-	for (i = 1; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
 	free_area_init(zones_size);
 }
 
@@ -61,6 +67,7 @@ void __init setup_memory(void)
 {
 	int i;
 	unsigned long map_size;
+#ifndef CONFIG_MMU
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
@@ -93,6 +100,7 @@ void __init setup_memory(void)
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
 
+#endif
 	/*
 	 * Kernel:
 	 * start: base phys address of kernel - page align
@@ -121,9 +129,13 @@ void __init setup_memory(void)
 	 * for 4GB of memory, using 4kB pages), plus 1 page
 	 * (in case the address isn't page-aligned).
 	 */
+#ifndef CONFIG_MMU
 	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
 					min_low_pfn, max_low_pfn);
-
+#else
+	map_size = init_bootmem_node(&contig_page_data,
+		PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+#endif
 	lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
@@ -137,6 +149,9 @@ void __init setup_memory(void)
 		reserve_bootmem(lmb.reserved.region[i].base,
 			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
+#ifdef CONFIG_MMU
+	init_bootmem_done = 1;
+#endif
 	paging_init();
 }
 
@@ -191,11 +206,145 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
 	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
+#ifdef CONFIG_MMU
+	mem_init_done = 1;
+#endif
 }
 
+#ifndef CONFIG_MMU
 /* Check against bounds of physical memory */
 int ___range_ok(unsigned long addr, unsigned long size)
 {
 	return ((addr < memory_start) ||
 		((addr + size) > memory_end));
 }
+EXPORT_SYMBOL(___range_ok);
+
+#else
+int page_is_ram(unsigned long pfn)
+{
+	return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void mm_cmdline_setup(void)
+{
+	unsigned long maxmem = 0;
+	char *p = cmd_line;
+
+	/* Look for mem= option on command line */
+	p = strstr(cmd_line, "mem=");
+	if (p) {
+		p += 4;
+		maxmem = memparse(p, &p);
+		if (maxmem && memory_size > maxmem) {
+			memory_size = maxmem;
+			memory_end = memory_start + memory_size;
+			lmb.memory.region[0].size = memory_size;
+		}
+	}
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+	/*
+	 * The Zone Protection Register (ZPR) defines how protection will
+	 * be applied to every page which is a member of a given zone. At
+	 * present, we utilize only two of the zones.
+	 * The zone index bits (of ZSEL) in the PTE are used for software
+	 * indicators, except the LSB.  For user access, zone 1 is used,
+	 * for kernel access, zone 0 is used.  We set all but zone 1
+	 * to zero, allowing only kernel access as indicated in the PTE.
+	 * For zone 1, we set a 01 binary (a value of 10 will not work)
+	 * to allow user access as indicated in the PTE.  This also allows
+	 * kernel access as indicated in the PTE.
+	 */
+	__asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+			"mts rzpr, r11;"
+			: : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+	unsigned int kstart, ksize;
+
+	if (!lmb.reserved.cnt) {
+		printk(KERN_EMERG "Error memory count\n");
+		machine_restart(NULL);
+	}
+
+	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+		printk(KERN_EMERG "Memory must be greater than 16MB\n");
+		machine_restart(NULL);
+	}
+	/* Find main memory where the kernel is */
+	memory_start = (u32) lmb.memory.region[0].base;
+	memory_end = (u32) lmb.memory.region[0].base +
+				(u32) lmb.memory.region[0].size;
+	memory_size = memory_end - memory_start;
+
+	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+	/*
+	 * Map out the kernel text/data/bss from the available physical
+	 * memory.
+	 */
+	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+	/* kernel size */
+	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+	lmb_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/* Remove the init RAM disk from the available memory. */
+/*	if (initrd_start) {
+		mem_pieces_remove(&phys_avail, __pa(initrd_start),
+				  initrd_end - initrd_start, 1);
+	}*/
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	/* Initialize the MMU hardware */
+	mmu_init_hw();
+
+	/* Map in all of RAM starting at CONFIG_KERNEL_START */
+	mapin_ram();
+
+#ifdef HIGHMEM_START_BOOL
+	ioremap_base = HIGHMEM_START;
+#else
+	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+	ioremap_bot = ioremap_base;
+
+	/* Initialize the context management stuff */
+	mmu_context_init();
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+	void *p;
+	if (init_bootmem_done) {
+		p = alloc_bootmem_pages(PAGE_SIZE);
+	} else {
+		/*
+		 * Mem start + 32MB -> here is limit
+		 * because of mem mapping from head.S
+		 */
+		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+					memory_start + 0x2000000));
+	}
+	return p;
+}
+#endif /* CONFIG_MMU */

arch/microblaze/mm/mmu_context.c

@@ -0,0 +1,70 @@
+/*
+ * This file contains the routines for handling the MMU.
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from arch/ppc/mm/4xx_mmu.c:
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+	/*
+	 * The use of context zero is reserved for the kernel.
+	 * This code assumes FIRST_CONTEXT < 32.
+	 */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :).  This would be the
+ * place to implement an LRU scheme if anyone were motivated to do it.
+ */
+void steal_context(void)
+{
+	struct mm_struct *mm;
+
+	/* free up context `next_mmu_context' */
+	/* if we shouldn't free context 0, don't... */
+	if (next_mmu_context < FIRST_CONTEXT)
+		next_mmu_context = FIRST_CONTEXT;
+	mm = context_mm[next_mmu_context];
+	flush_tlb_mm(mm);
+	destroy_context(mm);
+}

arch/microblaze/mm/pgtable.c

@@ -0,0 +1,286 @@
+/*
+ *  This file contains the routines setting up the linux page tables.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from arch/ppc/mm/pgtable.c:
+ *    -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file COPYING in the main directory of this
+ *  archive for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/sections.h>
+
+#define flush_HPTE(X, va, pg)	_tlbie(va)
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+
+/* The maximum lowmem defaults to 768Mb, but this can be configured to
+ * another value.
+ */
+#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
+
+#ifndef CONFIG_SMP
+struct pgtable_cache_struct quicklists;
+#endif
+
+static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
+		unsigned long flags)
+{
+	unsigned long v, i;
+	phys_addr_t p;
+	int err;
+
+	/*
+	 * Choose an address to map it to.
+	 * Once the vmalloc system is running, we use it.
+	 * Before then, we use space going down from ioremap_base
+	 * (ioremap_bot records where we're up to).
+	 */
+	p = addr & PAGE_MASK;
+	size = PAGE_ALIGN(addr + size) - p;
+
+	/*
+	 * Don't allow anybody to remap normal RAM that we're using.
+	 * mem_init() sets high_memory so only do the check after that.
+	 *
+	 * However, allow remap of rootfs: TBD
+	 */
+	if (mem_init_done &&
+		p >= memory_start && p < virt_to_phys(high_memory) &&
+		!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
+		p < virt_to_phys((unsigned long)__bss_stop))) {
+		printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT
+			" is RAM lr %p\n", (unsigned long)p,
+			__builtin_return_address(0));
+		return NULL;
+	}
+
+	if (size == 0)
+		return NULL;
+
+	/*
+	 * Is it already mapped? If the whole area is mapped then we're
+	 * done, otherwise remap it since we want to keep the virt addrs for
+	 * each request contiguous.
+	 *
+	 * We make the assumption here that if the bottom and top
+	 * of the range we want are mapped then it's mapped to the
+	 * same virt address (and this is contiguous).
+	 *  -- Cort
+	 */
+
+	if (mem_init_done) {
+		struct vm_struct *area;
+		area = get_vm_area(size, VM_IOREMAP);
+		if (area == NULL)
+			return NULL;
+		v = VMALLOC_VMADDR(area->addr);
+	} else {
+		v = (ioremap_bot -= size);
+	}
+
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+	if (flags & _PAGE_NO_CACHE)
+		flags |= _PAGE_GUARDED;
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(v + i, p + i, flags);
+	if (err) {
+		if (mem_init_done)
+			vfree((void *)v);
+		return NULL;
+	}
+
+	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void __iomem *ioremap(phys_addr_t addr, unsigned long size)
+{
+	return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+EXPORT_SYMBOL(ioremap);
+
+void iounmap(void *addr)
+{
+	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
+		vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+EXPORT_SYMBOL(iounmap);
+
+
+int map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+	pmd_t *pd;
+	pte_t *pg;
+	int err = -ENOMEM;
+	/* spin_lock(&init_mm.page_table_lock); */
+	/* Use upper 10 bits of VA to index the first level map */
+	pd = pmd_offset(pgd_offset_k(va), va);
+	/* Use middle 10 bits of VA to index the second-level map */
+	pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */
+	/* pg = pte_alloc_kernel(&init_mm, pd, va); */
+
+	if (pg != NULL) {
+		err = 0;
+		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
+				__pgprot(flags)));
+		if (mem_init_done)
+			flush_HPTE(0, va, pmd_val(*pd));
+			/* flush_HPTE(0, va, pg); */
+
+	}
+	/* spin_unlock(&init_mm.page_table_lock); */
+	return err;
+}
+
+void __init adjust_total_lowmem(void)
+{
+/* TBD */
+#if 0
+	unsigned long max_low_mem = MAX_LOW_MEM;
+
+	if (total_lowmem > max_low_mem) {
+		total_lowmem = max_low_mem;
+#ifndef CONFIG_HIGHMEM
+		printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
+				"CONFIG_HIGHMEM to reach %ld Mb\n",
+				max_low_mem >> 20, total_memory >> 20);
+		total_memory = total_lowmem;
+#endif /* CONFIG_HIGHMEM */
+	}
+#endif
+}
+
+static void show_tmem(unsigned long tmem)
+{
+	volatile unsigned long a;
+	a = a + tmem;
+}
+
+/*
+ * Map in all of physical memory starting at CONFIG_KERNEL_START.
+ */
+void __init mapin_ram(void)
+{
+	unsigned long v, p, s, f;
+
+	v = CONFIG_KERNEL_START;
+	p = memory_start;
+	show_tmem(memory_size);
+	for (s = 0; s < memory_size; s += PAGE_SIZE) {
+		f = _PAGE_PRESENT | _PAGE_ACCESSED |
+				_PAGE_SHARED | _PAGE_HWEXEC;
+		if ((char *) v < _stext || (char *) v >= _etext)
+			f |= _PAGE_WRENABLE;
+		else
+			/* On the MicroBlaze, no user access
+			   forces R/W kernel access */
+			f |= _PAGE_USER;
+		map_page(v, p, f);
+		v += PAGE_SIZE;
+		p += PAGE_SIZE;
+	}
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x)	((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/*
+ * Set up a mapping for a block of I/O.
+ * virt, phys, size must all be page-aligned.
+ * This should only be called before ioremap is called.
+ */
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags)
+{
+	int i;
+
+	if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
+		ioremap_bot = ioremap_base = virt;
+
+	/* Put it in the page tables. */
+	for (i = 0; i < size; i += PAGE_SIZE)
+		map_page(virt + i, phys + i, flags);
+}
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise.  The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+	pgd_t	*pgd;
+	pmd_t	*pmd;
+	pte_t	*pte;
+	int     retval = 0;
+
+	pgd = pgd_offset(mm, addr & PAGE_MASK);
+	if (pgd) {
+		pmd = pmd_offset(pgd, addr & PAGE_MASK);
+		if (pmd_present(*pmd)) {
+			pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
+			if (pte) {
+				retval = 1;
+				*ptep = pte;
+			}
+		}
+	}
+	return retval;
+}
+
+/* Find physical address for this virtual address.  Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+	unsigned long pa;
+
+	pte_t *pte;
+	struct mm_struct *mm;
+
+	/* Allow mapping of user addresses (within the thread)
+	 * for DMA if necessary.
+	 */
+	if (addr < TASK_SIZE)
+		mm = current->mm;
+	else
+		mm = &init_mm;
+
+	pa = 0;
+	if (get_pteptr(mm, addr, &pte))
+		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+
+	return pa;
+}

drivers/block/Kconfig

@@ -438,7 +438,7 @@ source "drivers/s390/block/Kconfig"
 
 config XILINX_SYSACE
 	tristate "Xilinx SystemACE support"
-	depends on 4xx
+	depends on 4xx || MICROBLAZE
 	help
 	  Include support for the Xilinx SystemACE CompactFlash interface
 

drivers/char/Kconfig

@@ -906,7 +906,7 @@ config DTLK
 
 config XILINX_HWICAP
 	tristate "Xilinx HWICAP Support"
-	depends on XILINX_VIRTEX
+	depends on XILINX_VIRTEX || MICROBLAZE
 	help
 	  This option enables support for Xilinx Internal Configuration
 	  Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex

drivers/gpio/Kconfig

@@ -69,7 +69,7 @@ comment "Memory mapped GPIO expanders:"
 
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
-	depends on PPC_OF
+	depends on PPC_OF || MICROBLAZE
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 

drivers/input/serio/Kconfig

@@ -192,7 +192,7 @@ config SERIO_RAW
 
 config SERIO_XILINX_XPS_PS2
 	tristate "Xilinx XPS PS/2 Controller Support"
-	depends on PPC
+	depends on PPC || MICROBLAZE
 	help
 	  This driver supports XPS PS/2 IP from the Xilinx EDK on
 	  PowerPC platform.

drivers/of/Kconfig

@@ -1,21 +1,21 @@
 config OF_DEVICE
 	def_bool y
-	depends on OF && (SPARC || PPC_OF)
+	depends on OF && (SPARC || PPC_OF || MICROBLAZE)
 
 config OF_GPIO
 	def_bool y
-	depends on OF && PPC_OF && GPIOLIB
+	depends on OF && (PPC_OF || MICROBLAZE) && GPIOLIB
 	help
 	  OpenFirmware GPIO accessors
 
 config OF_I2C
 	def_tristate I2C
-	depends on PPC_OF && I2C
+	depends on (PPC_OF || MICROBLAZE) && I2C
 	help
 	  OpenFirmware I2C accessors
 
 config OF_SPI
 	def_tristate SPI
-	depends on OF && PPC_OF && SPI
+	depends on OF && (PPC_OF || MICROBLAZE) && SPI
 	help
 	  OpenFirmware SPI accessors

drivers/spi/Kconfig

@@ -212,7 +212,7 @@ config SPI_TXX9
 
 config SPI_XILINX
 	tristate "Xilinx SPI controller"
-	depends on XILINX_VIRTEX && EXPERIMENTAL
+	depends on (XILINX_VIRTEX || MICROBLAZE) && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  This exposes the SPI controller IP from the Xilinx EDK.

drivers/usb/Kconfig

@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
 	default y if SUPERH				# r8a66597-hcd
+	default y if MICROBLAZE
 	default PCI
 
 # many non-PCI SOC chips embed OHCI

drivers/video/Kconfig

@@ -1996,7 +1996,7 @@ config FB_PS3_DEFAULT_SIZE_M
 
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
-	depends on FB && XILINX_VIRTEX
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT