kernel-fxtec-pro1x/arch/powerpc/boot/wrapper

369 lines
8.6 KiB
Text
Raw Normal View History

#!/bin/sh
# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org>
# This program may be used under the terms of version 2 of the GNU
# General Public License.
# This script takes a kernel binary and optionally an initrd image
# and/or a device-tree blob, and creates a bootable zImage for a
# given platform.
# Options:
# -o zImage specify output file
# -p platform specify platform (links in $platform.o)
# -i initrd specify initrd file
# -d devtree specify device-tree blob
# -s tree.dts specify device-tree source file (needs dtc installed)
# -c cache $kernel.strip.gz (use if present & newer, else make)
# -C prefix specify command prefix for cross-building tools
# (strip, objcopy, ld)
# -D dir specify directory containing data files used by script
# (default ./arch/powerpc/boot)
# -W dir specify working directory for temporary files (default .)
# Stop execution if any command fails
set -e
# Allow for verbose output
if [ "$V" = 1 ]; then
set -x
fi
# defaults
kernel=
ofile=zImage
platform=of
initrd=
dtb=
dts=
cacheit=
binary=
gzip=.gz
# cross-compilation prefix
CROSS=
# directory for object and other files used by this script
object=arch/powerpc/boot
objbin=$object
# directory for working files
tmpdir=.
usage() {
echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
echo ' [-D datadir] [-W workingdir] [--no-gzip] [vmlinux]' >&2
exit 1
}
while [ "$#" -gt 0 ]; do
case "$1" in
-o)
shift
[ "$#" -gt 0 ] || usage
ofile="$1"
;;
-p)
shift
[ "$#" -gt 0 ] || usage
platform="$1"
;;
-i)
shift
[ "$#" -gt 0 ] || usage
initrd="$1"
;;
-d)
shift
[ "$#" -gt 0 ] || usage
dtb="$1"
;;
-s)
shift
[ "$#" -gt 0 ] || usage
dts="$1"
;;
-c)
cacheit=y
;;
-C)
shift
[ "$#" -gt 0 ] || usage
CROSS="$1"
;;
-D)
shift
[ "$#" -gt 0 ] || usage
object="$1"
objbin="$1"
;;
-W)
shift
[ "$#" -gt 0 ] || usage
tmpdir="$1"
;;
--no-gzip)
gzip=
;;
-?)
usage
;;
*)
[ -z "$kernel" ] || usage
kernel="$1"
;;
esac
shift
done
if [ -n "$dts" ]; then
if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
dts="$object/dts/$dts"
fi
if [ -z "$dtb" ]; then
dtb="$platform.dtb"
fi
$object/dtc -O dtb -o "$dtb" -b 0 "$dts"
fi
if [ -z "$kernel" ]; then
kernel=vmlinux
fi
platformo=$object/"$platform".o
lds=$object/zImage.lds
ext=strip
objflags=-S
tmp=$tmpdir/zImage.$$.o
ksection=.kernel:vmlinux.strip
isection=.kernel:initrd
link_address='0x400000'
case "$platform" in
pseries)
platformo=$object/of.o
link_address='0x4000000'
;;
pmac|chrp)
platformo=$object/of.o
;;
coff)
platformo=$object/of.o
lds=$object/zImage.coff.lds
link_address='0x500000'
;;
miboot|uboot)
# miboot and U-boot want just the bare bits, not an ELF binary
ext=bin
objflags="-O binary"
tmp="$ofile"
ksection=image
isection=initrd
;;
cuboot*)
binary=y
gzip=
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 11:18:34 -07:00
case "$platform" in
*-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 11:18:34 -07:00
platformo=$object/cuboot-8xx.o
;;
*5200*|*-motionpro)
platformo=$object/cuboot-52xx.o
;;
*-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter)
platformo=$object/cuboot-pq2.o
;;
*-mpc824*)
platformo=$object/cuboot-824x.o
;;
*-mpc83*|*-asp834x*)
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 11:18:34 -07:00
platformo=$object/cuboot-83xx.o
;;
*-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 11:18:34 -07:00
platformo=$object/cuboot-85xx-cpm2.o
;;
*-mpc85*|*-tqm85*|*-sbc85*)
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 11:18:34 -07:00
platformo=$object/cuboot-85xx.o
;;
esac
;;
ps3)
platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
lds=$object/zImage.ps3.lds
gzip=
ext=bin
objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
link_address=''
;;
ep88xc|ep405|ep8248e)
platformo="$object/fixed-head.o $object/$platform.o"
binary=y
;;
adder875-redboot)
platformo="$object/fixed-head.o $object/redboot-8xx.o"
binary=y
;;
simpleboot-virtex405-*)
platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
binary=y
;;
simpleboot-virtex440-*)
platformo="$object/simpleboot.o $object/virtex.o"
binary=y
;;
simpleboot-*)
platformo="$object/simpleboot.o"
binary=y
;;
asp834x-redboot)
platformo="$object/fixed-head.o $object/redboot-83xx.o"
binary=y
;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
if [ -n "$gzip" ]; then
gzip -f -9 "$vmz.$$"
fi
if [ -n "$cacheit" ]; then
mv -f "$vmz.$$$gzip" "$vmz$gzip"
else
vmz="$vmz.$$"
fi
fi
vmz="$vmz$gzip"
# Extract kernel version information, some platforms want to include
# it in the image header
version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
cut -d' ' -f3`
if [ -n "$version" ]; then
uboot_version="-n Linux-$version"
fi
# physical offset of kernel image
membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
case "$platform" in
uboot)
rm -f "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
fi
exit 0
;;
esac
addsec() {
${CROSS}objcopy $4 $1 \
--add-section=$3="$2" \
--set-section-flags=$3=contents,alloc,load,readonly,data
}
addsec $tmp "$vmz" $ksection $object/empty.o
if [ -z "$cacheit" ]; then
rm -f "$vmz"
fi
if [ -n "$initrd" ]; then
addsec $tmp "$initrd" $isection
fi
if [ -n "$dtb" ]; then
addsec $tmp "$dtb" .kernel:dtb
if [ -n "$dts" ]; then
rm $dtb
fi
fi
if [ "$platform" != "miboot" ]; then
if [ -n "$link_address" ] ; then
text_start="-Ttext $link_address --defsym _start=$link_address"
fi
${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
[POWERPC] zImage: Cleanup and improve zImage entry point This patch re-organises the way the zImage wrapper code is entered, to allow more flexibility on platforms with unusual entry conditions. After this patch, a platform .o file has two options: 1) It can define a _zimage_start, in which case the platform code gets control from the very beginning of execution. In this case the platform code is responsible for relocating the zImage if necessary, clearing the BSS, performing any platform specific initialization, and finally calling start() to load and enter the kernel. 2) It can define platform_init(). In this case the generic crt0.S handles initial entry, and calls platform_init() before calling start(). The signature of platform_init() is changed, however, to take up to 5 parameters (in r3..r7) as they come from the platform's initial loader, instead of a fixed set of parameters based on OF's usage. When using the generic crt0.S, the platform .o can optionally supply a custom stack to use, using the BSS_STACK() macro. If this is not supplied, the crt0.S will assume that the loader has supplied a usable stack. In either case, the platform code communicates information to the generic code (specifically, a PROM pointer for OF systems, and/or an initrd image address supplied by the bootloader) via a global structure "loader_info". In addition the wrapper script is rearranged to ensure that the platform .o is always linked first. This means that platforms where the zImage entry point is at a fixed address or offset, rather than being encoded in the binary header can be supported using option (1). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 20:24:52 -07:00
$platformo $tmp $object/wrapper.a
rm $tmp
fi
# Some platforms need the zImage's entry point and base address
base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
if [ -n "$binary" ]; then
mv "$ofile" "$ofile".elf
${CROSS}objcopy -O binary "$ofile".elf "$ofile"
fi
# post-processing needed for some platforms
case "$platform" in
pseries|chrp)
powerpc: Sync RPA note in zImage with kernel's RPA note Commit 9b09c6d909dfd8de96b99b9b9c808b94b0a71614 ("powerpc: Change the default link address for pSeries zImage kernels") changed the real-base value in the CHRP note added by the addnote program from 12MB to 32MB to give more space for Open Firmware to load the zImage. (The real-base value says where we want OF to position itself in memory.) However, this change was ineffective on most pSeries machines, because the RPA note added by addnote has the "ignore me" flag set to 1. This was intended to tell OF to ignore just the RPA note, but has the side effect of also making OF ignore the CHRP note (at least on most pSeries machines). To solve this we have to set the "ignore me" flag to 0 in the RPA note. (We can't just omit the RPA note because that is equivalent to having an RPA note with default values, and the default values are not what we want.) However, then we have to make sure the values in the zImage's RPA note match up with the values that the kernel supplies later in prom_init.c with either the ibm,client-architecture-support call or the process-elf-header call in prom_send_capabilities(). So this sets the "ignore me" flag in the RPA note in addnote to 0, and adjusts the RPA note values in addnote.c and in prom_init.c to be consistent with each other and with the values in ibm_architecture_vec. However, since the wrapper is independent of the kernel, this doesn't ensure that the notes will stay consistent. To ensure that, this adds code to addnote.c so that it can extract the kernel's RPA note from the kernel binary and put that in the zImage. To that end, we put the kernel's fake ELF header (which contains the kernel's RPA note) into its own section, and arrange for wrapper to pull out that section with objcopy and pass it to addnote, which then extracts the RPA note from it and transfers it to the zImage. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-08 08:03:29 -06:00
${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
$objbin/addnote "$ofile" "$ofile".rpanote
rm -r "$ofile".rpanote
;;
coff)
[POWERPC] zImage: Cleanup and improve zImage entry point This patch re-organises the way the zImage wrapper code is entered, to allow more flexibility on platforms with unusual entry conditions. After this patch, a platform .o file has two options: 1) It can define a _zimage_start, in which case the platform code gets control from the very beginning of execution. In this case the platform code is responsible for relocating the zImage if necessary, clearing the BSS, performing any platform specific initialization, and finally calling start() to load and enter the kernel. 2) It can define platform_init(). In this case the generic crt0.S handles initial entry, and calls platform_init() before calling start(). The signature of platform_init() is changed, however, to take up to 5 parameters (in r3..r7) as they come from the platform's initial loader, instead of a fixed set of parameters based on OF's usage. When using the generic crt0.S, the platform .o can optionally supply a custom stack to use, using the BSS_STACK() macro. If this is not supplied, the crt0.S will assume that the loader has supplied a usable stack. In either case, the platform code communicates information to the generic code (specifically, a PROM pointer for OF systems, and/or an initrd image address supplied by the bootloader) via a global structure "loader_info". In addition the wrapper script is rearranged to ensure that the platform .o is always linked first. This means that platforms where the zImage entry point is at a fixed address or offset, rather than being encoded in the binary header can be supported using option (1). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 20:24:52 -07:00
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
$objbin/hack-coff "$ofile"
;;
cuboot*)
gzip -f -9 "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$uboot_version -d "$ofile".gz "$ofile"
;;
treeboot*)
mv "$ofile" "$ofile.elf"
$objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
if [ -z "$cacheit" ]; then
rm -f "$ofile.elf"
fi
exit 0
;;
ps3)
# The ps3's loader supports loading a gzipped binary image from flash
# rom to ram addr zero. The loader then enters the system reset
# vector at addr 0x100. A bootwrapper overlay is used to arrange for
# a binary image of the kernel to be at addr zero, and yet have a
# suitable bootwrapper entry at 0x100. To construct the final rom
# image 512 bytes from offset 0x100 is copied to the bootwrapper
# place holder at symbol __system_reset_kernel. The 512 bytes of the
# bootwrapper entry code at symbol __system_reset_overlay is then
# copied to offset 0x100. At runtime the bootwrapper program copies
# the data at __system_reset_kernel back to addr 0x100.
system_reset_overlay=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_overlay$' \
| cut -d' ' -f1`
system_reset_overlay=`printf "%d" $system_reset_overlay`
system_reset_kernel=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_kernel$' \
| cut -d' ' -f1`
system_reset_kernel=`printf "%d" $system_reset_kernel`
overlay_dest="256"
overlay_size="512"
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
skip=$overlay_dest seek=$system_reset_kernel \
count=$overlay_size bs=1
dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
skip=$system_reset_overlay seek=$overlay_dest \
count=$overlay_size bs=1
odir="$(dirname "$ofile.bin")"
rm -f "$odir/otheros.bld"
gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
;;
esac