drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Red Hat Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
|
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
|
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors: Dave Airlie
|
|
|
|
* Alon Levy
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* QXL cmd/ring handling */
|
|
|
|
|
|
|
|
#include "qxl_drv.h"
|
|
|
|
#include "qxl_object.h"
|
|
|
|
|
|
|
|
static int qxl_reap_surface_id(struct qxl_device *qdev, int max_to_reap);
|
|
|
|
|
|
|
|
struct ring {
|
|
|
|
struct qxl_ring_header header;
|
|
|
|
uint8_t elements[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct qxl_ring {
|
|
|
|
struct ring *ring;
|
|
|
|
int element_size;
|
|
|
|
int n_elements;
|
|
|
|
int prod_notify;
|
|
|
|
wait_queue_head_t *push_event;
|
|
|
|
spinlock_t lock;
|
|
|
|
};
|
|
|
|
|
|
|
|
void qxl_ring_free(struct qxl_ring *ring)
|
|
|
|
{
|
|
|
|
kfree(ring);
|
|
|
|
}
|
|
|
|
|
2013-07-03 22:58:45 -06:00
|
|
|
void qxl_ring_init_hdr(struct qxl_ring *ring)
|
|
|
|
{
|
|
|
|
ring->ring->header.notify_on_prod = ring->n_elements;
|
|
|
|
}
|
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
struct qxl_ring *
|
|
|
|
qxl_ring_create(struct qxl_ring_header *header,
|
|
|
|
int element_size,
|
|
|
|
int n_elements,
|
|
|
|
int prod_notify,
|
|
|
|
bool set_prod_notify,
|
|
|
|
wait_queue_head_t *push_event)
|
|
|
|
{
|
|
|
|
struct qxl_ring *ring;
|
|
|
|
|
|
|
|
ring = kmalloc(sizeof(*ring), GFP_KERNEL);
|
|
|
|
if (!ring)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
ring->ring = (struct ring *)header;
|
|
|
|
ring->element_size = element_size;
|
|
|
|
ring->n_elements = n_elements;
|
|
|
|
ring->prod_notify = prod_notify;
|
|
|
|
ring->push_event = push_event;
|
|
|
|
if (set_prod_notify)
|
2013-07-03 22:58:45 -06:00
|
|
|
qxl_ring_init_hdr(ring);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
spin_lock_init(&ring->lock);
|
|
|
|
return ring;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_check_header(struct qxl_ring *ring)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct qxl_ring_header *header = &(ring->ring->header);
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
ret = header->prod - header->cons < header->num_items;
|
|
|
|
if (ret == 0)
|
|
|
|
header->notify_on_cons = header->cons + 1;
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-07-03 22:58:45 -06:00
|
|
|
int qxl_check_idle(struct qxl_ring *ring)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct qxl_ring_header *header = &(ring->ring->header);
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
ret = header->prod == header->cons;
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_ring_push(struct qxl_ring *ring,
|
|
|
|
const void *new_elt, bool interruptible)
|
|
|
|
{
|
|
|
|
struct qxl_ring_header *header = &(ring->ring->header);
|
|
|
|
uint8_t *elt;
|
|
|
|
int idx, ret;
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
if (header->prod - header->cons == header->num_items) {
|
|
|
|
header->notify_on_cons = header->cons + 1;
|
|
|
|
mb();
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
if (!drm_can_sleep()) {
|
|
|
|
while (!qxl_check_header(ring))
|
|
|
|
udelay(1);
|
|
|
|
} else {
|
|
|
|
if (interruptible) {
|
|
|
|
ret = wait_event_interruptible(*ring->push_event,
|
|
|
|
qxl_check_header(ring));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
} else {
|
|
|
|
wait_event(*ring->push_event,
|
|
|
|
qxl_check_header(ring));
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
idx = header->prod & (ring->n_elements - 1);
|
|
|
|
elt = ring->ring->elements + idx * ring->element_size;
|
|
|
|
|
|
|
|
memcpy((void *)elt, new_elt, ring->element_size);
|
|
|
|
|
|
|
|
header->prod++;
|
|
|
|
|
|
|
|
mb();
|
|
|
|
|
|
|
|
if (header->prod == header->notify_on_prod)
|
|
|
|
outb(0, ring->prod_notify);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-04-15 21:24:25 -06:00
|
|
|
static bool qxl_ring_pop(struct qxl_ring *ring,
|
|
|
|
void *element)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
{
|
|
|
|
volatile struct qxl_ring_header *header = &(ring->ring->header);
|
|
|
|
volatile uint8_t *ring_elt;
|
|
|
|
int idx;
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
if (header->cons == header->prod) {
|
|
|
|
header->notify_on_prod = header->cons + 1;
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
idx = header->cons & (ring->n_elements - 1);
|
|
|
|
ring_elt = ring->ring->elements + idx * ring->element_size;
|
|
|
|
|
|
|
|
memcpy(element, (void *)ring_elt, ring->element_size);
|
|
|
|
|
|
|
|
header->cons++;
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
qxl_push_command_ring_release(struct qxl_device *qdev, struct qxl_release *release,
|
|
|
|
uint32_t type, bool interruptible)
|
|
|
|
{
|
|
|
|
struct qxl_command cmd;
|
2013-07-22 22:16:42 -06:00
|
|
|
struct qxl_bo_list *entry = list_first_entry(&release->bos, struct qxl_bo_list, tv.head);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
cmd.type = type;
|
2013-07-22 22:16:42 -06:00
|
|
|
cmd.data = qxl_bo_physical_address(qdev, to_qxl_bo(entry->tv.bo), release->release_offset);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
return qxl_ring_push(qdev->command_ring, &cmd, interruptible);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
qxl_push_cursor_ring_release(struct qxl_device *qdev, struct qxl_release *release,
|
|
|
|
uint32_t type, bool interruptible)
|
|
|
|
{
|
|
|
|
struct qxl_command cmd;
|
2013-07-22 22:16:42 -06:00
|
|
|
struct qxl_bo_list *entry = list_first_entry(&release->bos, struct qxl_bo_list, tv.head);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
cmd.type = type;
|
2013-07-22 22:16:42 -06:00
|
|
|
cmd.data = qxl_bo_physical_address(qdev, to_qxl_bo(entry->tv.bo), release->release_offset);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
return qxl_ring_push(qdev->cursor_ring, &cmd, interruptible);
|
|
|
|
}
|
|
|
|
|
|
|
|
bool qxl_queue_garbage_collect(struct qxl_device *qdev, bool flush)
|
|
|
|
{
|
|
|
|
if (!qxl_check_idle(qdev->release_ring)) {
|
|
|
|
queue_work(qdev->gc_queue, &qdev->gc_work);
|
|
|
|
if (flush)
|
|
|
|
flush_work(&qdev->gc_work);
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_garbage_collect(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
struct qxl_release *release;
|
|
|
|
uint64_t id, next_id;
|
|
|
|
int i = 0;
|
|
|
|
union qxl_release_info *info;
|
|
|
|
|
|
|
|
while (qxl_ring_pop(qdev->release_ring, &id)) {
|
|
|
|
QXL_INFO(qdev, "popped %lld\n", id);
|
|
|
|
while (id) {
|
|
|
|
release = qxl_release_from_id_locked(qdev, id);
|
|
|
|
if (release == NULL)
|
|
|
|
break;
|
|
|
|
|
|
|
|
info = qxl_release_map(qdev, release);
|
|
|
|
next_id = info->next;
|
|
|
|
qxl_release_unmap(qdev, release, info);
|
|
|
|
|
|
|
|
QXL_INFO(qdev, "popped %lld, next %lld\n", id,
|
|
|
|
next_id);
|
|
|
|
|
|
|
|
switch (release->type) {
|
|
|
|
case QXL_RELEASE_DRAWABLE:
|
|
|
|
case QXL_RELEASE_SURFACE_CMD:
|
|
|
|
case QXL_RELEASE_CURSOR_CMD:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DRM_ERROR("unexpected release type\n");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
id = next_id;
|
|
|
|
|
|
|
|
qxl_release_free(qdev, release);
|
|
|
|
++i;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
QXL_INFO(qdev, "%s: %lld\n", __func__, i);
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
2013-07-22 22:16:42 -06:00
|
|
|
int qxl_alloc_bo_reserved(struct qxl_device *qdev,
|
|
|
|
struct qxl_release *release,
|
|
|
|
unsigned long size,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
struct qxl_bo **_bo)
|
|
|
|
{
|
|
|
|
struct qxl_bo *bo;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = qxl_bo_create(qdev, size, false /* not kernel - device */,
|
2013-07-22 22:06:07 -06:00
|
|
|
false, QXL_GEM_DOMAIN_VRAM, NULL, &bo);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("failed to allocate VRAM BO\n");
|
|
|
|
return ret;
|
|
|
|
}
|
2013-07-22 22:16:42 -06:00
|
|
|
ret = qxl_release_list_add(release, bo);
|
|
|
|
if (ret)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
goto out_unref;
|
|
|
|
|
|
|
|
*_bo = bo;
|
|
|
|
return 0;
|
|
|
|
out_unref:
|
|
|
|
qxl_bo_unref(&bo);
|
2013-07-22 22:16:42 -06:00
|
|
|
return ret;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
}
|
|
|
|
|
2013-05-13 19:13:24 -06:00
|
|
|
static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port, bool intr)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
{
|
|
|
|
int irq_num;
|
|
|
|
long addr = qdev->io_base + port;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&qdev->async_io_mutex);
|
|
|
|
irq_num = atomic_read(&qdev->irq_received_io_cmd);
|
|
|
|
if (qdev->last_sent_io_cmd > irq_num) {
|
2013-05-13 19:13:24 -06:00
|
|
|
if (intr)
|
|
|
|
ret = wait_event_interruptible_timeout(qdev->io_cmd_event,
|
|
|
|
atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ);
|
|
|
|
else
|
|
|
|
ret = wait_event_timeout(qdev->io_cmd_event,
|
|
|
|
atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ);
|
|
|
|
/* 0 is timeout, just bail the "hw" has gone away */
|
|
|
|
if (ret <= 0)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
goto out;
|
|
|
|
irq_num = atomic_read(&qdev->irq_received_io_cmd);
|
|
|
|
}
|
|
|
|
outb(val, addr);
|
|
|
|
qdev->last_sent_io_cmd = irq_num + 1;
|
2013-05-13 19:13:24 -06:00
|
|
|
if (intr)
|
|
|
|
ret = wait_event_interruptible_timeout(qdev->io_cmd_event,
|
|
|
|
atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ);
|
|
|
|
else
|
|
|
|
ret = wait_event_timeout(qdev->io_cmd_event,
|
|
|
|
atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
out:
|
2013-05-13 19:13:24 -06:00
|
|
|
if (ret > 0)
|
|
|
|
ret = 0;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
mutex_unlock(&qdev->async_io_mutex);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void wait_for_io_cmd(struct qxl_device *qdev, uint8_t val, long port)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
restart:
|
2013-05-13 19:13:24 -06:00
|
|
|
ret = wait_for_io_cmd_user(qdev, val, port, false);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
if (ret == -ERESTARTSYS)
|
|
|
|
goto restart;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_io_update_area(struct qxl_device *qdev, struct qxl_bo *surf,
|
|
|
|
const struct qxl_rect *area)
|
|
|
|
{
|
|
|
|
int surface_id;
|
|
|
|
uint32_t surface_width, surface_height;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!surf->hw_surf_alloc)
|
|
|
|
DRM_ERROR("got io update area with no hw surface\n");
|
|
|
|
|
|
|
|
if (surf->is_primary)
|
|
|
|
surface_id = 0;
|
|
|
|
else
|
|
|
|
surface_id = surf->surface_id;
|
|
|
|
surface_width = surf->surf.width;
|
|
|
|
surface_height = surf->surf.height;
|
|
|
|
|
|
|
|
if (area->left < 0 || area->top < 0 ||
|
|
|
|
area->right > surface_width || area->bottom > surface_height) {
|
|
|
|
qxl_io_log(qdev, "%s: not doing area update for "
|
|
|
|
"%d, (%d,%d,%d,%d) (%d,%d)\n", __func__, surface_id, area->left,
|
|
|
|
area->top, area->right, area->bottom, surface_width, surface_height);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
mutex_lock(&qdev->update_area_mutex);
|
|
|
|
qdev->ram_header->update_area = *area;
|
|
|
|
qdev->ram_header->update_surface = surface_id;
|
2013-05-13 19:13:24 -06:00
|
|
|
ret = wait_for_io_cmd_user(qdev, 0, QXL_IO_UPDATE_AREA_ASYNC, true);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
mutex_unlock(&qdev->update_area_mutex);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_notify_oom(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
outb(0, qdev->io_base + QXL_IO_NOTIFY_OOM);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_flush_release(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
outb(0, qdev->io_base + QXL_IO_FLUSH_RELEASE);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_flush_surfaces(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
wait_for_io_cmd(qdev, 0, QXL_IO_FLUSH_SURFACES_ASYNC);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void qxl_io_destroy_primary(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
wait_for_io_cmd(qdev, 0, QXL_IO_DESTROY_PRIMARY_ASYNC);
|
|
|
|
}
|
|
|
|
|
2013-07-01 23:37:13 -06:00
|
|
|
void qxl_io_create_primary(struct qxl_device *qdev,
|
|
|
|
unsigned offset, struct qxl_bo *bo)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
{
|
|
|
|
struct qxl_surface_create *create;
|
|
|
|
|
|
|
|
QXL_INFO(qdev, "%s: qdev %p, ram_header %p\n", __func__, qdev,
|
|
|
|
qdev->ram_header);
|
|
|
|
create = &qdev->ram_header->create_surface;
|
|
|
|
create->format = bo->surf.format;
|
2013-07-01 23:37:13 -06:00
|
|
|
create->width = bo->surf.width;
|
|
|
|
create->height = bo->surf.height;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
create->stride = bo->surf.stride;
|
|
|
|
create->mem = qxl_bo_physical_address(qdev, bo, offset);
|
|
|
|
|
|
|
|
QXL_INFO(qdev, "%s: mem = %llx, from %p\n", __func__, create->mem,
|
|
|
|
bo->kptr);
|
|
|
|
|
|
|
|
create->flags = QXL_SURF_FLAG_KEEP_DATA;
|
|
|
|
create->type = QXL_SURF_TYPE_PRIMARY;
|
|
|
|
|
|
|
|
wait_for_io_cmd(qdev, 0, QXL_IO_CREATE_PRIMARY_ASYNC);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_memslot_add(struct qxl_device *qdev, uint8_t id)
|
|
|
|
{
|
|
|
|
QXL_INFO(qdev, "qxl_memslot_add %d\n", id);
|
|
|
|
wait_for_io_cmd(qdev, id, QXL_IO_MEMSLOT_ADD_ASYNC);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_log(struct qxl_device *qdev, const char *fmt, ...)
|
|
|
|
{
|
|
|
|
va_list args;
|
|
|
|
|
|
|
|
va_start(args, fmt);
|
|
|
|
vsnprintf(qdev->ram_header->log_buf, QXL_LOG_BUF_SIZE, fmt, args);
|
|
|
|
va_end(args);
|
|
|
|
/*
|
|
|
|
* DO not do a DRM output here - this will call printk, which will
|
|
|
|
* call back into qxl for rendering (qxl_fb)
|
|
|
|
*/
|
|
|
|
outb(0, qdev->io_base + QXL_IO_LOG);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_reset(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
outb(0, qdev->io_base + QXL_IO_RESET);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_io_monitors_config(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
qxl_io_log(qdev, "%s: %d [%dx%d+%d+%d]\n", __func__,
|
|
|
|
qdev->monitors_config ?
|
|
|
|
qdev->monitors_config->count : -1,
|
|
|
|
qdev->monitors_config && qdev->monitors_config->count ?
|
|
|
|
qdev->monitors_config->heads[0].width : -1,
|
|
|
|
qdev->monitors_config && qdev->monitors_config->count ?
|
|
|
|
qdev->monitors_config->heads[0].height : -1,
|
|
|
|
qdev->monitors_config && qdev->monitors_config->count ?
|
|
|
|
qdev->monitors_config->heads[0].x : -1,
|
|
|
|
qdev->monitors_config && qdev->monitors_config->count ?
|
|
|
|
qdev->monitors_config->heads[0].y : -1
|
|
|
|
);
|
|
|
|
|
|
|
|
wait_for_io_cmd(qdev, 0, QXL_IO_MONITORS_CONFIG_ASYNC);
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_surface_id_alloc(struct qxl_device *qdev,
|
|
|
|
struct qxl_bo *surf)
|
|
|
|
{
|
2013-05-02 18:37:20 -06:00
|
|
|
uint32_t handle;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
int idr_ret;
|
|
|
|
int count = 0;
|
|
|
|
again:
|
2013-05-02 18:37:20 -06:00
|
|
|
idr_preload(GFP_ATOMIC);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
2013-05-02 18:37:20 -06:00
|
|
|
idr_ret = idr_alloc(&qdev->surf_id_idr, NULL, 1, 0, GFP_NOWAIT);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
2013-05-02 18:37:20 -06:00
|
|
|
idr_preload_end();
|
|
|
|
if (idr_ret < 0)
|
|
|
|
return idr_ret;
|
|
|
|
handle = idr_ret;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
if (handle >= qdev->rom->n_surfaces) {
|
|
|
|
count++;
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
idr_remove(&qdev->surf_id_idr, handle);
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
qxl_reap_surface_id(qdev, 2);
|
|
|
|
goto again;
|
|
|
|
}
|
|
|
|
surf->surface_id = handle;
|
|
|
|
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
qdev->last_alloced_surf_id = handle;
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_surface_id_dealloc(struct qxl_device *qdev,
|
|
|
|
uint32_t surface_id)
|
|
|
|
{
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
idr_remove(&qdev->surf_id_idr, surface_id);
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_hw_surface_alloc(struct qxl_device *qdev,
|
|
|
|
struct qxl_bo *surf,
|
|
|
|
struct ttm_mem_reg *new_mem)
|
|
|
|
{
|
|
|
|
struct qxl_surface_cmd *cmd;
|
|
|
|
struct qxl_release *release;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (surf->hw_surf_alloc)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = qxl_alloc_surface_release_reserved(qdev, QXL_SURFACE_CMD_CREATE,
|
|
|
|
NULL,
|
|
|
|
&release);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2013-07-22 22:16:42 -06:00
|
|
|
ret = qxl_release_reserve_list(release, true);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
cmd = (struct qxl_surface_cmd *)qxl_release_map(qdev, release);
|
|
|
|
cmd->type = QXL_SURFACE_CMD_CREATE;
|
|
|
|
cmd->u.surface_create.format = surf->surf.format;
|
|
|
|
cmd->u.surface_create.width = surf->surf.width;
|
|
|
|
cmd->u.surface_create.height = surf->surf.height;
|
|
|
|
cmd->u.surface_create.stride = surf->surf.stride;
|
|
|
|
if (new_mem) {
|
|
|
|
int slot_id = surf->type == QXL_GEM_DOMAIN_VRAM ? qdev->main_mem_slot : qdev->surfaces_mem_slot;
|
|
|
|
struct qxl_memslot *slot = &(qdev->mem_slots[slot_id]);
|
|
|
|
|
|
|
|
/* TODO - need to hold one of the locks to read tbo.offset */
|
|
|
|
cmd->u.surface_create.data = slot->high_bits;
|
|
|
|
|
|
|
|
cmd->u.surface_create.data |= (new_mem->start << PAGE_SHIFT) + surf->tbo.bdev->man[new_mem->mem_type].gpu_offset;
|
|
|
|
} else
|
|
|
|
cmd->u.surface_create.data = qxl_bo_physical_address(qdev, surf, 0);
|
|
|
|
cmd->surface_id = surf->surface_id;
|
|
|
|
qxl_release_unmap(qdev, release, &cmd->release_info);
|
|
|
|
|
|
|
|
surf->surf_create = release;
|
|
|
|
|
2013-07-22 22:16:42 -06:00
|
|
|
/* no need to add a release to the fence for this surface bo,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
since it is only released when we ask to destroy the surface
|
|
|
|
and it would never signal otherwise */
|
|
|
|
qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
|
2013-07-22 22:16:42 -06:00
|
|
|
qxl_release_fence_buffer_objects(release);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
surf->hw_surf_alloc = true;
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
idr_replace(&qdev->surf_id_idr, surf, surf->surface_id);
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_hw_surface_dealloc(struct qxl_device *qdev,
|
|
|
|
struct qxl_bo *surf)
|
|
|
|
{
|
|
|
|
struct qxl_surface_cmd *cmd;
|
|
|
|
struct qxl_release *release;
|
|
|
|
int ret;
|
|
|
|
int id;
|
|
|
|
|
|
|
|
if (!surf->hw_surf_alloc)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = qxl_alloc_surface_release_reserved(qdev, QXL_SURFACE_CMD_DESTROY,
|
|
|
|
surf->surf_create,
|
|
|
|
&release);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
surf->surf_create = NULL;
|
|
|
|
/* remove the surface from the idr, but not the surface id yet */
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
idr_replace(&qdev->surf_id_idr, NULL, surf->surface_id);
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
surf->hw_surf_alloc = false;
|
|
|
|
|
|
|
|
id = surf->surface_id;
|
|
|
|
surf->surface_id = 0;
|
|
|
|
|
|
|
|
release->surface_release_id = id;
|
|
|
|
cmd = (struct qxl_surface_cmd *)qxl_release_map(qdev, release);
|
|
|
|
cmd->type = QXL_SURFACE_CMD_DESTROY;
|
|
|
|
cmd->surface_id = id;
|
|
|
|
qxl_release_unmap(qdev, release, &cmd->release_info);
|
|
|
|
|
|
|
|
qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
|
|
|
|
|
2013-07-22 22:16:42 -06:00
|
|
|
qxl_release_fence_buffer_objects(release);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf)
|
|
|
|
{
|
|
|
|
struct qxl_rect rect;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* if we are evicting, we need to make sure the surface is up
|
|
|
|
to date */
|
|
|
|
rect.left = 0;
|
|
|
|
rect.right = surf->surf.width;
|
|
|
|
rect.top = 0;
|
|
|
|
rect.bottom = surf->surf.height;
|
|
|
|
retry:
|
|
|
|
ret = qxl_io_update_area(qdev, surf, &rect);
|
|
|
|
if (ret == -ERESTARTSYS)
|
|
|
|
goto retry;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-04-15 21:24:25 -06:00
|
|
|
static void qxl_surface_evict_locked(struct qxl_device *qdev, struct qxl_bo *surf, bool do_update_area)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
|
|
|
{
|
|
|
|
/* no need to update area if we are just freeing the surface normally */
|
|
|
|
if (do_update_area)
|
|
|
|
qxl_update_surface(qdev, surf);
|
|
|
|
|
|
|
|
/* nuke the surface id at the hw */
|
|
|
|
qxl_hw_surface_dealloc(qdev, surf);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_surface_evict(struct qxl_device *qdev, struct qxl_bo *surf, bool do_update_area)
|
|
|
|
{
|
|
|
|
mutex_lock(&qdev->surf_evict_mutex);
|
|
|
|
qxl_surface_evict_locked(qdev, surf, do_update_area);
|
|
|
|
mutex_unlock(&qdev->surf_evict_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_reap_surf(struct qxl_device *qdev, struct qxl_bo *surf, bool stall)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = qxl_bo_reserve(surf, false);
|
|
|
|
if (ret == -EBUSY)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (surf->fence.num_active_releases > 0 && stall == false) {
|
|
|
|
qxl_bo_unreserve(surf);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (stall)
|
|
|
|
mutex_unlock(&qdev->surf_evict_mutex);
|
|
|
|
|
|
|
|
spin_lock(&surf->tbo.bdev->fence_lock);
|
|
|
|
ret = ttm_bo_wait(&surf->tbo, true, true, !stall);
|
|
|
|
spin_unlock(&surf->tbo.bdev->fence_lock);
|
|
|
|
|
|
|
|
if (stall)
|
|
|
|
mutex_lock(&qdev->surf_evict_mutex);
|
|
|
|
if (ret == -EBUSY) {
|
|
|
|
qxl_bo_unreserve(surf);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
qxl_surface_evict_locked(qdev, surf, true);
|
|
|
|
qxl_bo_unreserve(surf);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_reap_surface_id(struct qxl_device *qdev, int max_to_reap)
|
|
|
|
{
|
|
|
|
int num_reaped = 0;
|
|
|
|
int i, ret;
|
|
|
|
bool stall = false;
|
|
|
|
int start = 0;
|
|
|
|
|
|
|
|
mutex_lock(&qdev->surf_evict_mutex);
|
|
|
|
again:
|
|
|
|
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
start = qdev->last_alloced_surf_id + 1;
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
|
|
|
|
for (i = start; i < start + qdev->rom->n_surfaces; i++) {
|
|
|
|
void *objptr;
|
|
|
|
int surfid = i % qdev->rom->n_surfaces;
|
|
|
|
|
|
|
|
/* this avoids the case where the objects is in the
|
|
|
|
idr but has been evicted half way - its makes
|
|
|
|
the idr lookup atomic with the eviction */
|
|
|
|
spin_lock(&qdev->surf_id_idr_lock);
|
|
|
|
objptr = idr_find(&qdev->surf_id_idr, surfid);
|
|
|
|
spin_unlock(&qdev->surf_id_idr_lock);
|
|
|
|
|
|
|
|
if (!objptr)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = qxl_reap_surf(qdev, objptr, stall);
|
|
|
|
if (ret == 0)
|
|
|
|
num_reaped++;
|
|
|
|
if (num_reaped >= max_to_reap)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (num_reaped == 0 && stall == false) {
|
|
|
|
stall = true;
|
|
|
|
goto again;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&qdev->surf_evict_mutex);
|
|
|
|
if (num_reaped) {
|
|
|
|
usleep_range(500, 1000);
|
|
|
|
qxl_queue_garbage_collect(qdev, true);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|