Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/sound/soc/codecs/wm_hubs.h

75 lines
1.9 KiB
C
Raw Normal View History

ASoC: Factor out shared code from WM8993 The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 14:21:49 -06:00
/*
* wm_hubs.h -- WM899x common code
*
* Copyright 2009 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _WM_HUBS_H
#define _WM_HUBS_H
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-12 00:25:03 -06:00
#include <linux/completion.h>
#include <linux/interrupt.h>
ASoC: wm_hubs: Cache multiple DCS offsets Rather than invalidating the cached DCS value every time the headphone gain changes store multiple values, indexed by gain. This allows the optimisation we get from the cache to take effect more often. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-01 11:45:09 -06:00
#include <linux/list.h>
ASoC: wm_hubs: Factor out class W management Since the analogue portions of the checks for class W are the same over all the devices factor out these checks into wm_hubs and while we're at it also use wm_hubs_dac_hp_direct() to enable class W optimisations on more paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 14:29:29 -06:00
#include <sound/control.h>
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-12 00:25:03 -06:00
ASoC: Factor out shared code from WM8993 The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 14:21:49 -06:00
struct snd_soc_codec;
extern const unsigned int wm_hubs_spkmix_tlv[];
ASoC: Improved wm_hubs headphone handling Perform DC servo offset calibration using a series update sequence rather than startup update sequence, tuning the configuration of the WM8993 DC servo to make best use of this. Also introduce currently unused data allowing us to correct for any systematic errors in the DC servo calibration results and an alternative startup path for the headphone output which performs better with some chip revisions. The alternative setup sequence is enabled for WM8993. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-01-20 10:39:45 -07:00
/* This *must* be the first element of the codec->private_data struct */
struct wm_hubs_data {
ASoC: Support separate left and right channel dcs_codes values Some devices can have performance optimized by setting different offsets for left and right channels. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-31 22:10:16 -06:00
int dcs_codes_l;
int dcs_codes_r;
ASoC: Support second DC servo readback method for wm_hubs More recent Wolfson hubs devices add the ability to read back the DC servo calibration information from the register used to write offsets, and later still ones remove the old readback registers. Add support for the new scheme, and use it for WM8994 device revisions that support it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-29 10:09:45 -06:00
int dcs_readback_mode;
ASoC: Improved wm_hubs headphone handling Perform DC servo offset calibration using a series update sequence rather than startup update sequence, tuning the configuration of the WM8993 DC servo to make best use of this. Also introduce currently unused data allowing us to correct for any systematic errors in the DC servo calibration results and an alternative startup path for the headphone output which performs better with some chip revisions. The alternative setup sequence is enabled for WM8993. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-01-20 10:39:45 -07:00
int hp_startup_mode;
ASoC: Trigger wm_hubs series update startup off a separate flag Allowing the two to be used independently. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-07 16:23:52 -06:00
int series_startup;
ASoC: Allow suppression of series updates on wm_hubs devices Some devices do not support manual updates of the DC servo. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-07 16:32:46 -06:00
int no_series_update;
ASoC: Store DC offset correction for wm_hubs devices in class W mode Providing the analogue configuration of the output path remains the same the DC offset corrected by the DC servo will remain identical so we can skip the callibration, reducing the startup time for the headphone output. Implement this for the wm_hubs devices as has been done for several other CODECs. Don't do this if we have any analogue paths enabled since offsets may be being introduced by the analogue paths which could vary outside the control of the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-27 14:48:36 -06:00
ASoC: wm_hubs: Special case headphones for digital paths in more use cases The optimisations which we can do with caching the headphone DCS result in wm_hubs have only been enabled in cases where class W is enabled. However, there are more use cases which can benefit from the cache, especially with WM8994 series devices with their more advanced digital routing. Rather than keying off the class W information from the CODECs have a check in wm_hubs for a suitable path and use that to determine if we can deploy our headphone optimisations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 13:06:56 -06:00
bool no_cache_dac_hp_direct;
ASoC: wm_hubs: Cache multiple DCS offsets Rather than invalidating the cached DCS value every time the headphone gain changes store multiple values, indexed by gain. This allows the optimisation we get from the cache to take effect more often. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-01 11:45:09 -06:00
struct list_head dcs_cache;
ASoC: wm_hubs: Factor out class W management Since the analogue portions of the checks for class W are the same over all the devices factor out these checks into wm_hubs and while we're at it also use wm_hubs_dac_hp_direct() to enable class W optimisations on more paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 14:29:29 -06:00
bool (*check_class_w_digital)(struct snd_soc_codec *);
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-12 00:25:03 -06:00
ASoC: wm_hubs: Allow configuration of MICBIAS power up delay via pdata Sometimes the analogue circuitry connected to the microphone needs some time to settle after power up. Allow systems to configure this delay in the platform data, the driver will then insert the required delay during power up of paths that involve the microphone. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-21 10:54:52 -06:00
int micb1_delay;
int micb2_delay;
ASoC: wm_hubs: Improve single ended line output enable performance The enable of the single ended line outputs on wm_hubs devices performs better if the output is enabled prior to starting VMID. Since inactive outputs are held at VMID anyway there is little cost to doing this for unused outputs. Add callbacks into wm_hubs and keep track of which outputs are really active so we can disable them once we're active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08 11:51:42 -07:00
bool lineout1_se;
bool lineout1n_ena;
bool lineout1p_ena;
bool lineout2_se;
bool lineout2n_ena;
bool lineout2p_ena;
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-12 00:25:03 -06:00
bool dcs_done_irq;
struct completion dcs_done;
ASoC: wm_hubs: Move CODEC stored in private data into wm_hubs Further wm_hubs code will use this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-25 11:10:03 -06:00
struct snd_soc_codec *codec;
ASoC: Improved wm_hubs headphone handling Perform DC servo offset calibration using a series update sequence rather than startup update sequence, tuning the configuration of the WM8993 DC servo to make best use of this. Also introduce currently unused data allowing us to correct for any systematic errors in the DC servo calibration results and an alternative startup path for the headphone output which performs better with some chip revisions. The alternative setup sequence is enabled for WM8993. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-01-20 10:39:45 -07:00
};
ASoC: Factor out shared code from WM8993 The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 14:21:49 -06:00
extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *);
extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int);
ASoC: Factor out analogue platform data from WM8993 This is also shared with newer CODECs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-30 07:16:11 -06:00
extern int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *,
int lineout1_diff, int lineout2_diff,
int lineout1fb, int lineout2fb,
int jd_scthr, int jd_thr,
ASoC: wm_hubs: Allow configuration of MICBIAS power up delay via pdata Sometimes the analogue circuitry connected to the microphone needs some time to settle after power up. Allow systems to configure this delay in the platform data, the driver will then insert the required delay during power up of paths that involve the microphone. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-21 10:54:52 -06:00
int micbias1_dly, int micbias2_dly,
ASoC: Factor out analogue platform data from WM8993 This is also shared with newer CODECs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-30 07:16:11 -06:00
int micbias1_lvl, int micbias2_lvl);
ASoC: Factor out shared code from WM8993 The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 14:21:49 -06:00
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-12 00:25:03 -06:00
extern irqreturn_t wm_hubs_dcs_done(int irq, void *data);
ASoC: wm_hubs: Improve single ended line output enable performance The enable of the single ended line outputs on wm_hubs devices performs better if the output is enabled prior to starting VMID. Since inactive outputs are held at VMID anyway there is little cost to doing this for unused outputs. Add callbacks into wm_hubs and keep track of which outputs are really active so we can disable them once we're active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08 11:51:42 -07:00
extern void wm_hubs_vmid_ena(struct snd_soc_codec *codec);
extern void wm_hubs_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level);
ASoC: wm_hubs: Factor out class W management Since the analogue portions of the checks for class W are the same over all the devices factor out these checks into wm_hubs and while we're at it also use wm_hubs_dac_hp_direct() to enable class W optimisations on more paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 14:29:29 -06:00
extern void wm_hubs_update_class_w(struct snd_soc_codec *codec);
extern const struct snd_kcontrol_new wm_hubs_hpl_mux;
extern const struct snd_kcontrol_new wm_hubs_hpr_mux;
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices The individual devices should set the flag dcs_done_irq in the hubs shared data structure to indicate that they will flag the interrupt by calling wm_hubs_dcs_done(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-12 00:25:03 -06:00
ASoC: Factor out shared code from WM8993 The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 14:21:49 -06:00
#endif
Reference in a new issue Copy permalink