kernel-fxtec-pro1x/include/linux/mii.h

340 lines
8.5 KiB
C
Raw Normal View History

/*
* linux/mii.h: definitions for MII-compatible transceivers
* Originally drivers/net/sunhme.h.
*
* Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
*/
#ifndef __LINUX_MII_H__
#define __LINUX_MII_H__
#include <linux/if.h>
#include <uapi/linux/mii.h>
struct ethtool_cmd;
struct mii_if_info {
int phy_id;
int advertising;
int phy_id_mask;
int reg_num_mask;
unsigned int full_duplex : 1; /* is full duplex? */
unsigned int force_media : 1; /* is autoneg. disabled? */
unsigned int supports_gmii : 1; /* are GMII registers supported? */
struct net_device *dev;
int (*mdio_read) (struct net_device *dev, int phy_id, int location);
void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
};
extern int mii_link_ok (struct mii_if_info *mii);
extern int mii_nway_restart (struct mii_if_info *mii);
extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
extern int mii_check_gmii_support(struct mii_if_info *mii);
extern void mii_check_link (struct mii_if_info *mii);
extern unsigned int mii_check_media (struct mii_if_info *mii,
unsigned int ok_to_print,
unsigned int init_media);
extern int generic_mii_ioctl(struct mii_if_info *mii_if,
struct mii_ioctl_data *mii_data, int cmd,
unsigned int *duplex_changed);
static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
{
return (struct mii_ioctl_data *) &rq->ifr_ifru;
}
/**
* mii_nway_result
* @negotiated: value of MII ANAR and'd with ANLPAR
*
* Given a set of MII abilities, check each bit and returns the
* currently supported media, in the priority order defined by
* IEEE 802.3u. We use LPA_xxx constants but note this is not the
* value of LPA solely, as described above.
*
* The one exception to IEEE 802.3u is that 100baseT4 is placed
* between 100T-full and 100T-half. If your phy does not support
* 100T4 this is fine. If your phy places 100T4 elsewhere in the
* priority order, you will need to roll your own function.
*/
static inline unsigned int mii_nway_result (unsigned int negotiated)
{
unsigned int ret;
if (negotiated & LPA_100FULL)
ret = LPA_100FULL;
else if (negotiated & LPA_100BASE4)
ret = LPA_100BASE4;
else if (negotiated & LPA_100HALF)
ret = LPA_100HALF;
else if (negotiated & LPA_10FULL)
ret = LPA_10FULL;
else
ret = LPA_10HALF;
return ret;
}
/**
* mii_duplex
* @duplex_lock: Non-zero if duplex is locked at full
* @negotiated: value of MII ANAR and'd with ANLPAR
*
* A small helper function for a common case. Returns one
* if the media is operating or locked at full duplex, and
* returns zero otherwise.
*/
static inline unsigned int mii_duplex (unsigned int duplex_lock,
unsigned int negotiated)
{
if (duplex_lock)
return 1;
if (mii_nway_result(negotiated) & LPA_DUPLEX)
return 1;
return 0;
}
/**
* ethtool_adv_to_mii_adv_t
* @ethadv: the ethtool advertisement settings
*
* A small helper function that translates ethtool advertisement
* settings to phy autonegotiation advertisements for the
* MII_ADVERTISE register.
*/
static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
{
u32 result = 0;
if (ethadv & ADVERTISED_10baseT_Half)
result |= ADVERTISE_10HALF;
if (ethadv & ADVERTISED_10baseT_Full)
result |= ADVERTISE_10FULL;
if (ethadv & ADVERTISED_100baseT_Half)
result |= ADVERTISE_100HALF;
if (ethadv & ADVERTISED_100baseT_Full)
result |= ADVERTISE_100FULL;
if (ethadv & ADVERTISED_Pause)
result |= ADVERTISE_PAUSE_CAP;
if (ethadv & ADVERTISED_Asym_Pause)
result |= ADVERTISE_PAUSE_ASYM;
return result;
}
/**
* mii_adv_to_ethtool_adv_t
* @adv: value of the MII_ADVERTISE register
*
* A small helper function that translates MII_ADVERTISE bits
* to ethtool advertisement settings.
*/
static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
{
u32 result = 0;
if (adv & ADVERTISE_10HALF)
result |= ADVERTISED_10baseT_Half;
if (adv & ADVERTISE_10FULL)
result |= ADVERTISED_10baseT_Full;
if (adv & ADVERTISE_100HALF)
result |= ADVERTISED_100baseT_Half;
if (adv & ADVERTISE_100FULL)
result |= ADVERTISED_100baseT_Full;
if (adv & ADVERTISE_PAUSE_CAP)
result |= ADVERTISED_Pause;
if (adv & ADVERTISE_PAUSE_ASYM)
result |= ADVERTISED_Asym_Pause;
return result;
}
/**
* ethtool_adv_to_mii_ctrl1000_t
* @ethadv: the ethtool advertisement settings
*
* A small helper function that translates ethtool advertisement
* settings to phy autonegotiation advertisements for the
* MII_CTRL1000 register when in 1000T mode.
*/
static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
{
u32 result = 0;
if (ethadv & ADVERTISED_1000baseT_Half)
result |= ADVERTISE_1000HALF;
if (ethadv & ADVERTISED_1000baseT_Full)
result |= ADVERTISE_1000FULL;
return result;
}
/**
* mii_ctrl1000_to_ethtool_adv_t
* @adv: value of the MII_CTRL1000 register
*
* A small helper function that translates MII_CTRL1000
* bits, when in 1000Base-T mode, to ethtool
* advertisement settings.
*/
static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
{
u32 result = 0;
if (adv & ADVERTISE_1000HALF)
result |= ADVERTISED_1000baseT_Half;
if (adv & ADVERTISE_1000FULL)
result |= ADVERTISED_1000baseT_Full;
return result;
}
/**
* mii_lpa_to_ethtool_lpa_t
* @adv: value of the MII_LPA register
*
* A small helper function that translates MII_LPA
* bits, when in 1000Base-T mode, to ethtool
* LP advertisement settings.
*/
static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
{
u32 result = 0;
if (lpa & LPA_LPACK)
result |= ADVERTISED_Autoneg;
return result | mii_adv_to_ethtool_adv_t(lpa);
}
/**
* mii_stat1000_to_ethtool_lpa_t
* @adv: value of the MII_STAT1000 register
*
* A small helper function that translates MII_STAT1000
* bits, when in 1000Base-T mode, to ethtool
* advertisement settings.
*/
static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
{
u32 result = 0;
if (lpa & LPA_1000HALF)
result |= ADVERTISED_1000baseT_Half;
if (lpa & LPA_1000FULL)
result |= ADVERTISED_1000baseT_Full;
return result;
}
/**
* ethtool_adv_to_mii_adv_x
* @ethadv: the ethtool advertisement settings
*
* A small helper function that translates ethtool advertisement
* settings to phy autonegotiation advertisements for the
* MII_CTRL1000 register when in 1000Base-X mode.
*/
static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
{
u32 result = 0;
if (ethadv & ADVERTISED_1000baseT_Half)
result |= ADVERTISE_1000XHALF;
if (ethadv & ADVERTISED_1000baseT_Full)
result |= ADVERTISE_1000XFULL;
if (ethadv & ADVERTISED_Pause)
result |= ADVERTISE_1000XPAUSE;
if (ethadv & ADVERTISED_Asym_Pause)
result |= ADVERTISE_1000XPSE_ASYM;
return result;
}
/**
* mii_adv_to_ethtool_adv_x
* @adv: value of the MII_CTRL1000 register
*
* A small helper function that translates MII_CTRL1000
* bits, when in 1000Base-X mode, to ethtool
* advertisement settings.
*/
static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
{
u32 result = 0;
if (adv & ADVERTISE_1000XHALF)
result |= ADVERTISED_1000baseT_Half;
if (adv & ADVERTISE_1000XFULL)
result |= ADVERTISED_1000baseT_Full;
if (adv & ADVERTISE_1000XPAUSE)
result |= ADVERTISED_Pause;
if (adv & ADVERTISE_1000XPSE_ASYM)
result |= ADVERTISED_Asym_Pause;
return result;
}
/**
* mii_lpa_to_ethtool_lpa_x
* @adv: value of the MII_LPA register
*
* A small helper function that translates MII_LPA
* bits, when in 1000Base-X mode, to ethtool
* LP advertisement settings.
*/
static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
{
u32 result = 0;
if (lpa & LPA_LPACK)
result |= ADVERTISED_Autoneg;
return result | mii_adv_to_ethtool_adv_x(lpa);
}
/**
* mii_advertise_flowctrl - get flow control advertisement flags
* @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
*/
static inline u16 mii_advertise_flowctrl(int cap)
{
u16 adv = 0;
if (cap & FLOW_CTRL_RX)
adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
if (cap & FLOW_CTRL_TX)
adv ^= ADVERTISE_PAUSE_ASYM;
return adv;
}
/**
* mii_resolve_flowctrl_fdx
* @lcladv: value of MII ADVERTISE register
* @rmtadv: value of MII LPA register
*
* Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
*/
static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
{
u8 cap = 0;
if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
if (lcladv & ADVERTISE_PAUSE_CAP)
cap = FLOW_CTRL_RX;
else if (rmtadv & ADVERTISE_PAUSE_CAP)
cap = FLOW_CTRL_TX;
}
return cap;
}
#endif /* __LINUX_MII_H__ */