kernel-fxtec-pro1x/drivers/video/backlight/wm831x_bl.c

253 lines
6 KiB
C
Raw Normal View History

/*
* Backlight driver for Wolfson Microelectronics WM831x PMICs
*
* Copyright 2009 Wolfson Microelectonics plc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/backlight.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/regulator.h>
struct wm831x_backlight_data {
struct wm831x *wm831x;
int isink_reg;
int current_brightness;
};
static int wm831x_backlight_set(struct backlight_device *bl, int brightness)
{
struct wm831x_backlight_data *data = bl_get_data(bl);
struct wm831x *wm831x = data->wm831x;
int power_up = !data->current_brightness && brightness;
int power_down = data->current_brightness && !brightness;
int ret;
if (power_up) {
/* Enable the ISINK */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_ENA, WM831X_CS1_ENA);
if (ret < 0)
goto err;
/* Enable the DC-DC */
ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
WM831X_DC4_ENA, WM831X_DC4_ENA);
if (ret < 0)
goto err;
}
if (power_down) {
/* DCDC first */
ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
WM831X_DC4_ENA, 0);
if (ret < 0)
goto err;
/* ISINK */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0);
if (ret < 0)
goto err;
}
/* Set the new brightness */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_ISEL_MASK, brightness);
if (ret < 0)
goto err;
if (power_up) {
/* Drive current through the ISINK */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_DRIVE, WM831X_CS1_DRIVE);
if (ret < 0)
return ret;
}
data->current_brightness = brightness;
return 0;
err:
/* If we were in the middle of a power transition always shut down
* for safety.
*/
if (power_up || power_down) {
wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0);
}
return ret;
}
static int wm831x_backlight_update_status(struct backlight_device *bl)
{
int brightness = bl->props.brightness;
if (bl->props.power != FB_BLANK_UNBLANK)
brightness = 0;
if (bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;
if (bl->props.state & BL_CORE_SUSPENDED)
brightness = 0;
return wm831x_backlight_set(bl, brightness);
}
static int wm831x_backlight_get_brightness(struct backlight_device *bl)
{
struct wm831x_backlight_data *data = bl_get_data(bl);
return data->current_brightness;
}
static const struct backlight_ops wm831x_backlight_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = wm831x_backlight_update_status,
.get_brightness = wm831x_backlight_get_brightness,
};
static int wm831x_backlight_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *wm831x_pdata;
struct wm831x_backlight_pdata *pdata;
struct wm831x_backlight_data *data;
struct backlight_device *bl;
struct backlight_properties props;
int ret, i, max_isel, isink_reg, dcdc_cfg;
/* We need platform data */
if (pdev->dev.parent->platform_data) {
wm831x_pdata = pdev->dev.parent->platform_data;
pdata = wm831x_pdata->backlight;
} else {
pdata = NULL;
}
if (!pdata) {
dev_err(&pdev->dev, "No platform data supplied\n");
return -EINVAL;
}
/* Figure out the maximum current we can use */
for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) {
if (wm831x_isinkv_values[i] > pdata->max_uA)
break;
}
if (i == 0) {
dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA);
return -EINVAL;
}
max_isel = i - 1;
if (pdata->max_uA != wm831x_isinkv_values[max_isel])
dev_warn(&pdev->dev,
"Maximum current is %duA not %duA as requested\n",
wm831x_isinkv_values[max_isel], pdata->max_uA);
switch (pdata->isink) {
case 1:
isink_reg = WM831X_CURRENT_SINK_1;
dcdc_cfg = 0;
break;
case 2:
isink_reg = WM831X_CURRENT_SINK_2;
dcdc_cfg = WM831X_DC4_FBSRC;
break;
default:
dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink);
return -EINVAL;
}
/* Configure the ISINK to use for feedback */
ret = wm831x_reg_unlock(wm831x);
if (ret < 0)
return ret;
ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC,
dcdc_cfg);
wm831x_reg_lock(wm831x);
if (ret < 0)
return ret;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
data->wm831x = wm831x;
data->current_brightness = 0;
data->isink_reg = isink_reg;
props.max_brightness = max_isel;
bl = backlight_device_register("wm831x", &pdev->dev, data,
&wm831x_backlight_ops, &props);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
kfree(data);
return PTR_ERR(bl);
}
bl->props.brightness = max_isel;
platform_set_drvdata(pdev, bl);
/* Disable the DCDC if it was started so we can bootstrap */
wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
backlight_update_status(bl);
return 0;
}
static int wm831x_backlight_remove(struct platform_device *pdev)
{
struct backlight_device *bl = platform_get_drvdata(pdev);
struct wm831x_backlight_data *data = bl_get_data(bl);
backlight_device_unregister(bl);
kfree(data);
return 0;
}
static struct platform_driver wm831x_backlight_driver = {
.driver = {
.name = "wm831x-backlight",
.owner = THIS_MODULE,
},
.probe = wm831x_backlight_probe,
.remove = wm831x_backlight_remove,
};
static int __init wm831x_backlight_init(void)
{
return platform_driver_register(&wm831x_backlight_driver);
}
module_init(wm831x_backlight_init);
static void __exit wm831x_backlight_exit(void)
{
platform_driver_unregister(&wm831x_backlight_driver);
}
module_exit(wm831x_backlight_exit);
MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-backlight");