kernel-fxtec-pro1x/arch/powerpc/boot/dts/mpc8572ds.dtsi

429 lines
10 KiB
Text
Raw Normal View History

/*
* MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "fs-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00060000>;
label = "dtb-nor";
};
partition@7f60000 {
reg = <0x07f60000 0x00020000>;
label = "env-nor";
read-only;
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "fs-nand";
};
partition@12000000 {
reg = <0x12000000 0x08000000>;
label = "ramdisk-nand";
};
partition@1a000000 {
reg = <0x1a000000 0x04000000>;
label = "kernel-nand";
};
partition@1e000000 {
reg = <0x1e000000 0x01000000>;
label = "dtb-nand";
};
partition@1f000000 {
reg = <0x1f000000 0x21000000>;
label = "empty-nand";
};
};
nand@4,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x4 0x0 0x40000>;
};
nand@5,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x5 0x0 0x40000>;
};
nand@6,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x6 0x0 0x40000>;
};
};
&board_soc {
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <10 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <10 1 0 0>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupts = <10 1 0 0>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupts = <10 1 0 0>;
reg = <0x3>;
};
sgmii_phy0: sgmii-phy@0 {
interrupts = <6 1 0 0>;
reg = <0x1c>;
};
sgmii_phy1: sgmii-phy@1 {
interrupts = <6 1 0 0>;
reg = <0x1d>;
};
sgmii_phy2: sgmii-phy@2 {
interrupts = <7 1 0 0>;
reg = <0x1e>;
};
sgmii_phy3: sgmii-phy@3 {
interrupts = <7 1 0 0>;
reg = <0x1f>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xAAAAAAAB>;
fsl,tmr-fiper1 = <0x3B9AC9FB>;
fsl,tmr-fiper2 = <0x3B9AC9FB>;
fsl,max-adj = <499999999>;
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
&board_pci0 {
pcie@0 {
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
// IDSEL 0x1c USB
0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0
0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2 0 0>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
gpio@400 {
reg = <0x1 0x400 0x80>;
};
};
};
};
};