kernel-fxtec-pro1x/net/wireless/core.c

463 lines
10 KiB
C
Raw Normal View History

/*
* This is the linux wireless configuration interface.
*
* Copyright 2006-2008 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/nl80211.h>
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include <net/wireless.h>
#include "nl80211.h"
#include "core.h"
#include "sysfs.h"
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
#include "reg.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
MODULE_AUTHOR("Johannes Berg");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
/* RCU might be appropriate here since we usually
* only read the list, and that can happen quite
* often because we need to do it for each command */
LIST_HEAD(cfg80211_drv_list);
DEFINE_MUTEX(cfg80211_drv_mutex);
/* for debugfs */
static struct dentry *ieee80211_debugfs_dir;
/* requires cfg80211_drv_mutex to be held! */
static struct cfg80211_registered_device *cfg80211_drv_by_wiphy(int wiphy)
{
struct cfg80211_registered_device *result = NULL, *drv;
list_for_each_entry(drv, &cfg80211_drv_list, list) {
if (drv->idx == wiphy) {
result = drv;
break;
}
}
return result;
}
/* requires cfg80211_drv_mutex to be held! */
static struct cfg80211_registered_device *
__cfg80211_drv_from_info(struct genl_info *info)
{
int ifindex;
struct cfg80211_registered_device *bywiphy = NULL, *byifidx = NULL;
struct net_device *dev;
int err = -EINVAL;
if (info->attrs[NL80211_ATTR_WIPHY]) {
bywiphy = cfg80211_drv_by_wiphy(
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
err = -ENODEV;
}
if (info->attrs[NL80211_ATTR_IFINDEX]) {
ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
dev = dev_get_by_index(&init_net, ifindex);
if (dev) {
if (dev->ieee80211_ptr)
byifidx =
wiphy_to_dev(dev->ieee80211_ptr->wiphy);
dev_put(dev);
}
err = -ENODEV;
}
if (bywiphy && byifidx) {
if (bywiphy != byifidx)
return ERR_PTR(-EINVAL);
else
return bywiphy; /* == byifidx */
}
if (bywiphy)
return bywiphy;
if (byifidx)
return byifidx;
return ERR_PTR(err);
}
struct cfg80211_registered_device *
cfg80211_get_dev_from_info(struct genl_info *info)
{
struct cfg80211_registered_device *drv;
mutex_lock(&cfg80211_drv_mutex);
drv = __cfg80211_drv_from_info(info);
/* if it is not an error we grab the lock on
* it to assure it won't be going away while
* we operate on it */
if (!IS_ERR(drv))
mutex_lock(&drv->mtx);
mutex_unlock(&cfg80211_drv_mutex);
return drv;
}
struct cfg80211_registered_device *
cfg80211_get_dev_from_ifindex(int ifindex)
{
struct cfg80211_registered_device *drv = ERR_PTR(-ENODEV);
struct net_device *dev;
mutex_lock(&cfg80211_drv_mutex);
dev = dev_get_by_index(&init_net, ifindex);
if (!dev)
goto out;
if (dev->ieee80211_ptr) {
drv = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
mutex_lock(&drv->mtx);
} else
drv = ERR_PTR(-ENODEV);
dev_put(dev);
out:
mutex_unlock(&cfg80211_drv_mutex);
return drv;
}
void cfg80211_put_dev(struct cfg80211_registered_device *drv)
{
BUG_ON(IS_ERR(drv));
mutex_unlock(&drv->mtx);
}
int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname)
{
struct cfg80211_registered_device *drv;
int idx, taken = -1, result, digits;
mutex_lock(&cfg80211_drv_mutex);
/* prohibit calling the thing phy%d when %d is not its number */
sscanf(newname, PHY_NAME "%d%n", &idx, &taken);
if (taken == strlen(newname) && idx != rdev->idx) {
/* count number of places needed to print idx */
digits = 1;
while (idx /= 10)
digits++;
/*
* deny the name if it is phy<idx> where <idx> is printed
* without leading zeroes. taken == strlen(newname) here
*/
result = -EINVAL;
if (taken == strlen(PHY_NAME) + digits)
goto out_unlock;
}
/* Ignore nop renames */
result = 0;
if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0)
goto out_unlock;
/* Ensure another device does not already have this name. */
list_for_each_entry(drv, &cfg80211_drv_list, list) {
result = -EINVAL;
if (strcmp(newname, dev_name(&drv->wiphy.dev)) == 0)
goto out_unlock;
}
/* this will only check for collisions in sysfs
* which is not even always compiled in.
*/
result = device_rename(&rdev->wiphy.dev, newname);
if (result)
goto out_unlock;
if (rdev->wiphy.debugfsdir &&
!debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
rdev->wiphy.debugfsdir,
rdev->wiphy.debugfsdir->d_parent,
newname))
printk(KERN_ERR "cfg80211: failed to rename debugfs dir to %s!\n",
newname);
result = 0;
out_unlock:
mutex_unlock(&cfg80211_drv_mutex);
if (result == 0)
nl80211_notify_dev_rename(rdev);
return result;
}
/* exported functions */
struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv)
{
static int wiphy_counter;
struct cfg80211_registered_device *drv;
int alloc_size;
WARN_ON(!ops->add_key && ops->del_key);
WARN_ON(ops->add_key && !ops->del_key);
alloc_size = sizeof(*drv) + sizeof_priv;
drv = kzalloc(alloc_size, GFP_KERNEL);
if (!drv)
return NULL;
drv->ops = ops;
mutex_lock(&cfg80211_drv_mutex);
drv->idx = wiphy_counter++;
if (unlikely(drv->idx < 0)) {
wiphy_counter--;
mutex_unlock(&cfg80211_drv_mutex);
/* ugh, wrapped! */
kfree(drv);
return NULL;
}
mutex_unlock(&cfg80211_drv_mutex);
/* give it a proper name */
snprintf(drv->wiphy.dev.bus_id, BUS_ID_SIZE,
PHY_NAME "%d", drv->idx);
mutex_init(&drv->mtx);
mutex_init(&drv->devlist_mtx);
INIT_LIST_HEAD(&drv->netdev_list);
device_initialize(&drv->wiphy.dev);
drv->wiphy.dev.class = &ieee80211_class;
drv->wiphy.dev.platform_data = drv;
return &drv->wiphy;
}
EXPORT_SYMBOL(wiphy_new);
int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
int res;
enum ieee80211_band band;
struct ieee80211_supported_band *sband;
bool have_band = false;
int i;
u16 ifmodes = wiphy->interface_modes;
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
/* sanity check supported bands/channels */
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
sband = wiphy->bands[band];
if (!sband)
continue;
sband->band = band;
if (!sband->n_channels || !sband->n_bitrates) {
WARN_ON(1);
return -EINVAL;
}
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
sband->channels[i].orig_mag =
sband->channels[i].max_antenna_gain;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
}
have_band = true;
}
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
/* set up regulatory info */
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
mutex_lock(&cfg80211_reg_mutex);
wiphy_update_regulatory(wiphy, REGDOM_SET_BY_CORE);
mutex_unlock(&cfg80211_reg_mutex);
mutex_lock(&cfg80211_drv_mutex);
res = device_add(&drv->wiphy.dev);
if (res)
goto out_unlock;
list_add(&drv->list, &cfg80211_drv_list);
/* add to debugfs */
drv->wiphy.debugfsdir =
debugfs_create_dir(wiphy_name(&drv->wiphy),
ieee80211_debugfs_dir);
if (IS_ERR(drv->wiphy.debugfsdir))
drv->wiphy.debugfsdir = NULL;
res = 0;
out_unlock:
mutex_unlock(&cfg80211_drv_mutex);
return res;
}
EXPORT_SYMBOL(wiphy_register);
void wiphy_unregister(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
/* protect the device list */
mutex_lock(&cfg80211_drv_mutex);
BUG_ON(!list_empty(&drv->netdev_list));
/*
* Try to grab drv->mtx. If a command is still in progress,
* hopefully the driver will refuse it since it's tearing
* down the device already. We wait for this command to complete
* before unlinking the item from the list.
* Note: as codified by the BUG_ON above we cannot get here if
* a virtual interface is still associated. Hence, we can only
* get to lock contention here if userspace issues a command
* that identified the hardware by wiphy index.
*/
mutex_lock(&drv->mtx);
/* unlock again before freeing */
mutex_unlock(&drv->mtx);
list_del(&drv->list);
device_del(&drv->wiphy.dev);
debugfs_remove(drv->wiphy.debugfsdir);
mutex_unlock(&cfg80211_drv_mutex);
}
EXPORT_SYMBOL(wiphy_unregister);
void cfg80211_dev_free(struct cfg80211_registered_device *drv)
{
mutex_destroy(&drv->mtx);
mutex_destroy(&drv->devlist_mtx);
kfree(drv);
}
void wiphy_free(struct wiphy *wiphy)
{
put_device(&wiphy->dev);
}
EXPORT_SYMBOL(wiphy_free);
static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
unsigned long state,
void *ndev)
{
struct net_device *dev = ndev;
struct cfg80211_registered_device *rdev;
if (!dev->ieee80211_ptr)
return 0;
rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
WARN_ON(dev->ieee80211_ptr->iftype == NL80211_IFTYPE_UNSPECIFIED);
switch (state) {
case NETDEV_REGISTER:
mutex_lock(&rdev->devlist_mtx);
list_add(&dev->ieee80211_ptr->list, &rdev->netdev_list);
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
printk(KERN_ERR "wireless: failed to add phy80211 "
"symlink to netdev!\n");
}
dev->ieee80211_ptr->netdev = dev;
mutex_unlock(&rdev->devlist_mtx);
break;
case NETDEV_UNREGISTER:
mutex_lock(&rdev->devlist_mtx);
if (!list_empty(&dev->ieee80211_ptr->list)) {
sysfs_remove_link(&dev->dev.kobj, "phy80211");
list_del_init(&dev->ieee80211_ptr->list);
}
mutex_unlock(&rdev->devlist_mtx);
break;
}
return 0;
}
static struct notifier_block cfg80211_netdev_notifier = {
.notifier_call = cfg80211_netdev_notifier_call,
};
static int cfg80211_init(void)
{
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
int err;
err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
err = register_netdevice_notifier(&cfg80211_netdev_notifier);
if (err)
goto out_fail_notifier;
err = nl80211_init();
if (err)
goto out_fail_nl80211;
ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
err = regulatory_init();
if (err)
goto out_fail_reg;
return 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
out_fail_reg:
debugfs_remove(ieee80211_debugfs_dir);
out_fail_nl80211:
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
out_fail_notifier:
wiphy_sysfs_exit();
out_fail_sysfs:
return err;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
subsys_initcall(cfg80211_init);
static void cfg80211_exit(void)
{
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 00:19:48 -06:00
regulatory_exit();
}
module_exit(cfg80211_exit);