Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/sparc64/kernel/trampoline.S

430 lines
9.3 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* $Id: trampoline.S,v 1.26 2002/02/09 19:49:30 davem Exp $
* trampoline.S: Jump start slave processors on sparc64.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/head.h>
#include <asm/asi.h>
#include <asm/lsu.h>
#include <asm/dcr.h>
#include <asm/dcu.h>
#include <asm/pstate.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/spitfire.h>
#include <asm/processor.h>
#include <asm/thread_info.h>
#include <asm/mmu.h>
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
#include <asm/hypervisor.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
.data
.align 8
call_method:
.asciz "call-method"
.align 8
itlb_load:
.asciz "SUNW,itlb-load"
.align 8
dtlb_load:
.asciz "SUNW,dtlb-load"
.text
.align 8
.globl sparc64_cpu_startup, sparc64_cpu_startup_end
sparc64_cpu_startup:
flushw
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
BRANCH_IF_SUN4V(g1, niagara_startup)
BRANCH_IF_CHEETAH_BASE(g1, g5, cheetah_startup)
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1, g5, cheetah_plus_startup)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ba,pt %xcc, spitfire_startup
nop
cheetah_plus_startup:
/* Preserve OBP chosen DCU and DCR register settings. */
ba,pt %xcc, cheetah_generic_startup
nop
cheetah_startup:
mov DCR_BPE | DCR_RPE | DCR_SI | DCR_IFPOE | DCR_MS, %g1
wr %g1, %asr18
sethi %uhi(DCU_ME|DCU_RE|DCU_HPE|DCU_SPE|DCU_SL|DCU_WE), %g5
or %g5, %ulo(DCU_ME|DCU_RE|DCU_HPE|DCU_SPE|DCU_SL|DCU_WE), %g5
sllx %g5, 32, %g5
or %g5, DCU_DM | DCU_IM | DCU_DC | DCU_IC, %g5
stxa %g5, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
cheetah_generic_startup:
mov TSB_EXTENSION_P, %g3
stxa %g0, [%g3] ASI_DMMU
stxa %g0, [%g3] ASI_IMMU
membar #Sync
mov TSB_EXTENSION_S, %g3
stxa %g0, [%g3] ASI_DMMU
membar #Sync
mov TSB_EXTENSION_N, %g3
stxa %g0, [%g3] ASI_DMMU
stxa %g0, [%g3] ASI_IMMU
membar #Sync
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
/* fallthru */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
niagara_startup:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Disable STICK_INT interrupts. */
sethi %hi(0x80000000), %g5
sllx %g5, 32, %g5
wr %g5, %asr25
ba,pt %xcc, startup_continue
nop
spitfire_startup:
mov (LSU_CONTROL_IC | LSU_CONTROL_DC | LSU_CONTROL_IM | LSU_CONTROL_DM), %g1
stxa %g1, [%g0] ASI_LSU_CONTROL
membar #Sync
startup_continue:
wrpr %g0, 15, %pil
sethi %hi(0x80000000), %g2
sllx %g2, 32, %g2
wr %g2, 0, %tick_cmpr
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
BRANCH_IF_SUN4V(g1, niagara_lock_tlb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Call OBP by hand to lock KERNBASE into i/d tlbs.
* We lock 2 consequetive entries if we are 'bigkernel'.
*/
mov %o0, %l0
sethi %hi(prom_entry_lock), %g2
1: ldstub [%g2 + %lo(prom_entry_lock)], %g1
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 16:42:04 -06:00
membar #StoreLoad | #StoreStore
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
brnz,pn %g1, 1b
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 16:42:04 -06:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x10], %l2
mov %sp, %l1
add %l2, -(192 + 128), %sp
flushw
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
mov 5, %g2
stx %g2, [%sp + 2047 + 128 + 0x08]
mov 1, %g2
stx %g2, [%sp + 2047 + 128 + 0x10]
sethi %hi(itlb_load), %g2
or %g2, %lo(itlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
[SPARC64]: Rewrite bootup sequence. Instead of all of this cpu-specific code to remap the kernel to the correct location, use portable firmware calls to do this instead. What we do now is the following in position independant assembler: chosen_node = prom_finddevice("/chosen"); prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu"); vaddr = 4MB_ALIGN(current_text_addr()); prom_translate(vaddr, &paddr_high, &paddr_low, &mode); prom_boot_mapping_mode = mode; prom_boot_mapping_phys_high = paddr_high; prom_boot_mapping_phys_low = paddr_low; prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low); and that replaces the massive amount of by-hand TLB probing and programming we used to do here. The new code should also handle properly the case where the kernel is mapped at the correct address already (think: future kexec support). Consequently, the bulk of remap_kernel() dies as does the entirety of arch/sparc64/prom/map.S We try to share some strings in the PROM library with the ones used at bootup, and while we're here mark input strings to oplib.h routines with "const" when appropriate. There are many more simplifications now possible. For one thing, we can consolidate the two copies we now have of a lot of cpu setup code sitting in head.S and trampoline.S. This is a significant step towards CONFIG_DEBUG_PAGEALLOC support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 21:11:33 -06:00
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
sethi %hi(kern_locked_tte_data), %g2
ldx [%g2 + %lo(kern_locked_tte_data)], %g2
stx %g2, [%sp + 2047 + 128 + 0x30]
mov 15, %g2
BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
mov 63, %g2
1:
stx %g2, [%sp + 2047 + 128 + 0x38]
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
sethi %hi(bigkernel), %g2
lduw [%g2 + %lo(bigkernel)], %g2
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
brz,pt %g2, do_dtlb
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
nop
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
mov 5, %g2
stx %g2, [%sp + 2047 + 128 + 0x08]
mov 1, %g2
stx %g2, [%sp + 2047 + 128 + 0x10]
sethi %hi(itlb_load), %g2
or %g2, %lo(itlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
[SPARC64]: Rewrite bootup sequence. Instead of all of this cpu-specific code to remap the kernel to the correct location, use portable firmware calls to do this instead. What we do now is the following in position independant assembler: chosen_node = prom_finddevice("/chosen"); prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu"); vaddr = 4MB_ALIGN(current_text_addr()); prom_translate(vaddr, &paddr_high, &paddr_low, &mode); prom_boot_mapping_mode = mode; prom_boot_mapping_phys_high = paddr_high; prom_boot_mapping_phys_low = paddr_low; prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low); and that replaces the massive amount of by-hand TLB probing and programming we used to do here. The new code should also handle properly the case where the kernel is mapped at the correct address already (think: future kexec support). Consequently, the bulk of remap_kernel() dies as does the entirety of arch/sparc64/prom/map.S We try to share some strings in the PROM library with the ones used at bootup, and while we're here mark input strings to oplib.h routines with "const" when appropriate. There are many more simplifications now possible. For one thing, we can consolidate the two copies we now have of a lot of cpu setup code sitting in head.S and trampoline.S. This is a significant step towards CONFIG_DEBUG_PAGEALLOC support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 21:11:33 -06:00
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE + 0x400000), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
sethi %hi(kern_locked_tte_data), %g2
ldx [%g2 + %lo(kern_locked_tte_data)], %g2
sethi %hi(0x400000), %g1
add %g2, %g1, %g2
stx %g2, [%sp + 2047 + 128 + 0x30]
mov 14, %g2
BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
mov 62, %g2
1:
stx %g2, [%sp + 2047 + 128 + 0x38]
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
do_dtlb:
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
mov 5, %g2
stx %g2, [%sp + 2047 + 128 + 0x08]
mov 1, %g2
stx %g2, [%sp + 2047 + 128 + 0x10]
sethi %hi(dtlb_load), %g2
or %g2, %lo(dtlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
[SPARC64]: Rewrite bootup sequence. Instead of all of this cpu-specific code to remap the kernel to the correct location, use portable firmware calls to do this instead. What we do now is the following in position independant assembler: chosen_node = prom_finddevice("/chosen"); prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu"); vaddr = 4MB_ALIGN(current_text_addr()); prom_translate(vaddr, &paddr_high, &paddr_low, &mode); prom_boot_mapping_mode = mode; prom_boot_mapping_phys_high = paddr_high; prom_boot_mapping_phys_low = paddr_low; prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low); and that replaces the massive amount of by-hand TLB probing and programming we used to do here. The new code should also handle properly the case where the kernel is mapped at the correct address already (think: future kexec support). Consequently, the bulk of remap_kernel() dies as does the entirety of arch/sparc64/prom/map.S We try to share some strings in the PROM library with the ones used at bootup, and while we're here mark input strings to oplib.h routines with "const" when appropriate. There are many more simplifications now possible. For one thing, we can consolidate the two copies we now have of a lot of cpu setup code sitting in head.S and trampoline.S. This is a significant step towards CONFIG_DEBUG_PAGEALLOC support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 21:11:33 -06:00
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
sethi %hi(kern_locked_tte_data), %g2
ldx [%g2 + %lo(kern_locked_tte_data)], %g2
stx %g2, [%sp + 2047 + 128 + 0x30]
mov 15, %g2
BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
mov 63, %g2
1:
stx %g2, [%sp + 2047 + 128 + 0x38]
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
sethi %hi(bigkernel), %g2
lduw [%g2 + %lo(bigkernel)], %g2
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
brz,pt %g2, do_unlock
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
nop
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
mov 5, %g2
stx %g2, [%sp + 2047 + 128 + 0x08]
mov 1, %g2
stx %g2, [%sp + 2047 + 128 + 0x10]
sethi %hi(dtlb_load), %g2
or %g2, %lo(dtlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
[SPARC64]: Rewrite bootup sequence. Instead of all of this cpu-specific code to remap the kernel to the correct location, use portable firmware calls to do this instead. What we do now is the following in position independant assembler: chosen_node = prom_finddevice("/chosen"); prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu"); vaddr = 4MB_ALIGN(current_text_addr()); prom_translate(vaddr, &paddr_high, &paddr_low, &mode); prom_boot_mapping_mode = mode; prom_boot_mapping_phys_high = paddr_high; prom_boot_mapping_phys_low = paddr_low; prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low); and that replaces the massive amount of by-hand TLB probing and programming we used to do here. The new code should also handle properly the case where the kernel is mapped at the correct address already (think: future kexec support). Consequently, the bulk of remap_kernel() dies as does the entirety of arch/sparc64/prom/map.S We try to share some strings in the PROM library with the ones used at bootup, and while we're here mark input strings to oplib.h routines with "const" when appropriate. There are many more simplifications now possible. For one thing, we can consolidate the two copies we now have of a lot of cpu setup code sitting in head.S and trampoline.S. This is a significant step towards CONFIG_DEBUG_PAGEALLOC support. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 21:11:33 -06:00
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE + 0x400000), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
sethi %hi(kern_locked_tte_data), %g2
ldx [%g2 + %lo(kern_locked_tte_data)], %g2
sethi %hi(0x400000), %g1
add %g2, %g1, %g2
stx %g2, [%sp + 2047 + 128 + 0x30]
mov 14, %g2
BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
mov 62, %g2
1:
stx %g2, [%sp + 2047 + 128 + 0x38]
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
do_unlock:
sethi %hi(prom_entry_lock), %g2
stb %g0, [%g2 + %lo(prom_entry_lock)]
membar #StoreStore | #StoreLoad
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
ba,pt %xcc, after_lock_tlb
nop
niagara_lock_tlb:
[SPARC64]: Fix hypervisor call arg passing. Function goes in %o5, args go in %o0 --> %o5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 23:57:21 -07:00
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
sethi %hi(KERNBASE), %o0
clr %o1
sethi %hi(kern_locked_tte_data), %o2
ldx [%o2 + %lo(kern_locked_tte_data)], %o2
mov HV_MMU_IMMU, %o3
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
ta HV_FAST_TRAP
[SPARC64]: Fix hypervisor call arg passing. Function goes in %o5, args go in %o0 --> %o5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 23:57:21 -07:00
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
sethi %hi(KERNBASE), %o0
clr %o1
sethi %hi(kern_locked_tte_data), %o2
ldx [%o2 + %lo(kern_locked_tte_data)], %o2
mov HV_MMU_DMMU, %o3
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
ta HV_FAST_TRAP
sethi %hi(bigkernel), %g2
lduw [%g2 + %lo(bigkernel)], %g2
brz,pt %g2, after_lock_tlb
nop
[SPARC64]: Fix hypervisor call arg passing. Function goes in %o5, args go in %o0 --> %o5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 23:57:21 -07:00
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
sethi %hi(KERNBASE + 0x400000), %o0
clr %o1
sethi %hi(kern_locked_tte_data), %o2
ldx [%o2 + %lo(kern_locked_tte_data)], %o2
sethi %hi(0x400000), %o3
add %o2, %o3, %o2
mov HV_MMU_IMMU, %o3
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
ta HV_FAST_TRAP
[SPARC64]: Fix hypervisor call arg passing. Function goes in %o5, args go in %o0 --> %o5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 23:57:21 -07:00
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
sethi %hi(KERNBASE + 0x400000), %o0
clr %o1
sethi %hi(kern_locked_tte_data), %o2
ldx [%o2 + %lo(kern_locked_tte_data)], %o2
sethi %hi(0x400000), %o3
add %o2, %o3, %o2
mov HV_MMU_DMMU, %o3
[SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 03:52:44 -07:00
ta HV_FAST_TRAP
after_lock_tlb:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
mov %l1, %sp
flushw
mov %l0, %o0
wrpr %g0, (PSTATE_PRIV | PSTATE_PEF), %pstate
wr %g0, 0, %fprs
/* XXX Buggy PROM... */
srl %o0, 0, %o0
ldx [%o0], %g6
wr %g0, ASI_P, %asi
mov PRIMARY_CONTEXT, %g7
[SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:13:05 -07:00
661: stxa %g0, [%g7] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %g0, [%g7] ASI_MMU
.previous
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
membar #Sync
mov SECONDARY_CONTEXT, %g7
[SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:13:05 -07:00
661: stxa %g0, [%g7] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %g0, [%g7] ASI_MMU
.previous
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
membar #Sync
mov 1, %g5
sllx %g5, THREAD_SHIFT, %g5
sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5
add %g6, %g5, %sp
mov 0, %fp
wrpr %g0, 0, %wstate
wrpr %g0, 0, %tl
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
/* Load TBA, then we can resurface. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sethi %hi(sparc64_ttable_tl0), %g5
wrpr %g5, %tba
ldx [%g6 + TI_TASK], %g4
wrpr %g0, 0, %wstate
call init_irqwork_curcpu
nop
[SPARC64]: Allocate and register the 4 sun4v mondo queues at bootup. Needs to occur before we enable PSTATE_IE in %pstate. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 01:08:23 -07:00
sethi %hi(tlb_type), %g3
lduw [%g3 + %lo(tlb_type)], %g2
cmp %g2, 3
bne,pt %icc, 1f
nop
call sun4v_init_mondo_queues
[SPARC64]: Fix mondo queue allocations. We have to use bootmem during init_IRQ and page alloc for sibling cpu calls. Also, fix incorrect hypervisor call return value checks in the hypervisor SMP cpu mondo send code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 00:07:13 -07:00
mov 0, %o0
[SPARC64]: Allocate and register the 4 sun4v mondo queues at bootup. Needs to occur before we enable PSTATE_IE in %pstate. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 01:08:23 -07:00
1: call init_cur_cpu_trap
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[SPARC64]: Replace cheetah+ code patching with variables. Instead of code patching to handle the page size fields in the context registers, just use variables from which we get the proper values. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 16:23:20 -06:00
/* Start using proper page size encodings in ctx register. */
[SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:13:05 -07:00
sethi %hi(sparc64_kern_pri_context), %g3
ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2
mov PRIMARY_CONTEXT, %g1
661: stxa %g2, [%g1] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %g2, [%g1] ASI_MMU
.previous
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
rdpr %pstate, %o1
or %o1, PSTATE_IE, %o1
wrpr %o1, 0, %pstate
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
sethi %hi(is_sun4v), %o0
lduw [%o0 + %lo(is_sun4v)], %o0
brz,pt %o0, 1f
nop
TRAP_LOAD_TRAP_BLOCK(%g2, %g3)
add %g2, TRAP_PER_CPU_FAULT_INFO, %g2
stxa %g2, [%g0] ASI_SCRATCHPAD
/* Compute physical address:
*
* paddr = kern_base + (mmfsa_vaddr - KERNBASE)
*/
sethi %hi(KERNBASE), %g3
sub %g2, %g3, %g2
sethi %hi(kern_base), %g3
ldx [%g3 + %lo(kern_base)], %g3
add %g2, %g3, %o1
call prom_set_trap_table_sun4v
sethi %hi(sparc64_ttable_tl0), %o0
ba,pt %xcc, 2f
nop
1: call prom_set_trap_table
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sethi %hi(sparc64_ttable_tl0), %o0
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
2: call smp_callin
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
nop
call cpu_idle
mov 0, %o0
call cpu_panic
nop
1: b,a,pt %xcc, 1b
.align 8
sparc64_cpu_startup_end:
Reference in a new issue Copy permalink