Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/crypto/Kconfig

1605 lines
46 KiB
Text
Raw Normal View History

xor: make 'xor_blocks' a library routine for use with async_tx The async_tx api tries to use a dma engine for an operation, but will fall back to an optimized software routine otherwise. Xor support is implemented using the raid5 xor routines. For organizational purposes this routine is moved to a common area. The following fixes are also made: * rename xor_block => xor_blocks, suggested by Adrian Bunk * ensure that xor.o initializes before md.o in the built-in case * checkpatch.pl fixes * mark calibrate_xor_blocks __init, Adrian Bunk Cc: Adrian Bunk <bunk@stusta.de> Cc: NeilBrown <neilb@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-09 12:56:42 -06:00
#
# Generic algorithms support
#
config XOR_BLOCKS
tristate
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 11:10:44 -07:00
# async_tx api: hardware offloaded memory transfer/transform support
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 11:10:44 -07:00
source "crypto/async_tx/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 11:10:44 -07:00
#
# Cryptographic API Configuration
#
[CRYPTO] Kconfig: Use menuconfig objects Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-17 23:11:01 -06:00
menuconfig CRYPTO
[CRYPTO] api: Make the crypto subsystem fully modular Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-30 02:36:09 -06:00
tristate "Cryptographic API"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
This option provides the core Cryptographic API.
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
if CRYPTO
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Crypto core or helper"
crypto: api - Add fips_enable flag Add the ability to turn FIPS-compliant mode on or off at boot In order to be FIPS compliant, several check may need to be preformed that may be construed as unusefull in a non-compliant mode. This patch allows us to set a kernel flag incating that we are running in a fips-compliant mode from boot up. It also exports that mode information to user space via a sysctl (/proc/sys/crypto/fips_enabled). Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-05 00:13:08 -06:00
config CRYPTO_FIPS
bool "FIPS 200 compliance"
crypto: drbg - Use Kconfig to ensure at least one RNG option is set This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 08:15:08 -06:00
depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS
crypto: fips - only panic on bad/missing crypto mod signatures Per further discussion with NIST, the requirements for FIPS state that we only need to panic the system on failed kernel module signature checks for crypto subsystem modules. This moves the fips-mode-only module signature check out of the generic module loading code, into the crypto subsystem, at points where we can catch both algorithm module loads and mode module loads. At the same time, make CONFIG_CRYPTO_FIPS dependent on CONFIG_MODULE_SIG, as this is entirely necessary for FIPS mode. v2: remove extraneous blank line, perform checks in static inline function, drop no longer necessary fips.h include. CC: "David S. Miller" <davem@davemloft.net> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-02 13:37:30 -06:00
depends on MODULE_SIG
crypto: api - Add fips_enable flag Add the ability to turn FIPS-compliant mode on or off at boot In order to be FIPS compliant, several check may need to be preformed that may be construed as unusefull in a non-compliant mode. This patch allows us to set a kernel flag incating that we are running in a fips-compliant mode from boot up. It also exports that mode information to user space via a sysctl (/proc/sys/crypto/fips_enabled). Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-05 00:13:08 -06:00
help
This options enables the fips boot option which is
required if you want to system to operate in a FIPS 200
certification. You should say no unless you know what
crypto: fips - FIPS requires algorithm self-tests Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-03 05:17:49 -06:00
this is.
crypto: api - Add fips_enable flag Add the ability to turn FIPS-compliant mode on or off at boot In order to be FIPS compliant, several check may need to be preformed that may be construed as unusefull in a non-compliant mode. This patch allows us to set a kernel flag incating that we are running in a fips-compliant mode from boot up. It also exports that mode information to user space via a sysctl (/proc/sys/crypto/fips_enabled). Tested successfully by me. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-05 00:13:08 -06:00
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
config CRYPTO_ALGAPI
tristate
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
select CRYPTO_ALGAPI2
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
help
This option provides the API for cryptographic algorithms.
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
config CRYPTO_ALGAPI2
tristate
[CRYPTO] api: Add aead crypto type This patch adds crypto_aead which is the interface for AEAD (Authenticated Encryption with Associated Data) algorithms. AEAD algorithms perform authentication and encryption in one step. Traditionally users (such as IPsec) would use two different crypto algorithms to perform these. With AEAD this comes down to one algorithm and one operation. Of course if traditional algorithms were used we'd still be doing two operations underneath. However, real AEAD algorithms may allow the underlying operations to be optimised as well. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:36:14 -06:00
config CRYPTO_AEAD
tristate
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
select CRYPTO_AEAD2
[CRYPTO] api: Add aead crypto type This patch adds crypto_aead which is the interface for AEAD (Authenticated Encryption with Associated Data) algorithms. AEAD algorithms perform authentication and encryption in one step. Traditionally users (such as IPsec) would use two different crypto algorithms to perform these. With AEAD this comes down to one algorithm and one operation. Of course if traditional algorithms were used we'd still be doing two operations underneath. However, real AEAD algorithms may allow the underlying operations to be optimised as well. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:36:14 -06:00
select CRYPTO_ALGAPI
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
config CRYPTO_AEAD2
tristate
select CRYPTO_ALGAPI2
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 08:07:53 -06:00
config CRYPTO_BLKCIPHER
tristate
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
select CRYPTO_BLKCIPHER2
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 08:07:53 -06:00
select CRYPTO_ALGAPI
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
config CRYPTO_BLKCIPHER2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_RNG2
crypto: chainiv - Use kcrypto_wq instead of keventd_wq keventd_wq has potential starvation problem, so use dedicated kcrypto_wq instead. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 23:44:02 -07:00
select CRYPTO_WORKQUEUE
[CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 08:07:53 -06:00
[CRYPTO] digest: Added user API for new hash type The existing digest user interface is inadequate for support asynchronous operations. For one it doesn't return a value to indicate success or failure, nor does it take a per-operation descriptor which is essential for the issuing of requests while other requests are still outstanding. This patch is the first in a series of steps to remodel the interface for asynchronous operations. For the ease of transition the new interface will be known as "hash" while the old one will remain as "digest". This patch also changes sg_next to allow chaining. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-19 06:24:23 -06:00
config CRYPTO_HASH
tristate
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
select CRYPTO_HASH2
[CRYPTO] digest: Added user API for new hash type The existing digest user interface is inadequate for support asynchronous operations. For one it doesn't return a value to indicate success or failure, nor does it take a per-operation descriptor which is essential for the issuing of requests while other requests are still outstanding. This patch is the first in a series of steps to remodel the interface for asynchronous operations. For the ease of transition the new interface will be known as "hash" while the old one will remain as "digest". This patch also changes sg_next to allow chaining. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-19 06:24:23 -06:00
select CRYPTO_ALGAPI
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
config CRYPTO_HASH2
tristate
select CRYPTO_ALGAPI2
crypto: rng - RNG interface and implementation This patch adds a random number generator interface as well as a cryptographic pseudo-random number generator based on AES. It is meant to be used in cases where a deterministic CPRNG is required. One of the first applications will be as an input in the IPsec IV generation process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-14 06:15:52 -06:00
config CRYPTO_RNG
tristate
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
select CRYPTO_RNG2
crypto: rng - RNG interface and implementation This patch adds a random number generator interface as well as a cryptographic pseudo-random number generator based on AES. It is meant to be used in cases where a deterministic CPRNG is required. One of the first applications will be as an input in the IPsec IV generation process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-14 06:15:52 -06:00
select CRYPTO_ALGAPI
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
config CRYPTO_RNG2
tristate
select CRYPTO_ALGAPI2
crypto: rng - Make DRBG the default RNG This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT that simply selects the DRBG. This new option is then selected by the IV generators. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 00:49:31 -06:00
config CRYPTO_RNG_DEFAULT
tristate
select CRYPTO_DRBG_MENU
crypto: compress - Add pcomp interface The current "comp" crypto interface supports one-shot (de)compression only, i.e. the whole data buffer to be (de)compressed must be passed at once, and the whole (de)compressed data buffer will be received at once. In several use-cases (e.g. compressed file systems that store files in big compressed blocks), this workflow is not suitable. Furthermore, the "comp" type doesn't provide for the configuration of (de)compression parameters, and always allocates workspace memory for both compression and decompression, which may waste memory. To solve this, add a "pcomp" partial (de)compression interface that provides the following operations: - crypto_compress_{init,update,final}() for compression, - crypto_decompress_{init,update,final}() for decompression, - crypto_{,de}compress_setup(), to configure (de)compression parameters (incl. allocating workspace memory). The (de)compression methods take a struct comp_request, which was mimicked after the z_stream object in zlib, and contains buffer pointer and length pairs for input and output. The setup methods take an opaque parameter pointer and length pair. Parameters are supposed to be encoded using netlink attributes, whose meanings depend on the actual (name of the) (de)compression algorithm. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-04 00:05:33 -07:00
config CRYPTO_PCOMP
crypto: pcomp - Fix illegal Kconfig configuration The PCOMP Kconfig entry current allows the following combination which is illegal: ZLIB=y PCOMP=y ALGAPI=m ALGAPI2=y MANAGER=m MANAGER2=m This patch fixes this by adding PCOMP2 so that PCOMP can select ALGAPI to propagate the setting to MANAGER2. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-06-03 04:33:06 -06:00
tristate
select CRYPTO_PCOMP2
select CRYPTO_ALGAPI
config CRYPTO_PCOMP2
crypto: compress - Add pcomp interface The current "comp" crypto interface supports one-shot (de)compression only, i.e. the whole data buffer to be (de)compressed must be passed at once, and the whole (de)compressed data buffer will be received at once. In several use-cases (e.g. compressed file systems that store files in big compressed blocks), this workflow is not suitable. Furthermore, the "comp" type doesn't provide for the configuration of (de)compression parameters, and always allocates workspace memory for both compression and decompression, which may waste memory. To solve this, add a "pcomp" partial (de)compression interface that provides the following operations: - crypto_compress_{init,update,final}() for compression, - crypto_decompress_{init,update,final}() for decompression, - crypto_{,de}compress_setup(), to configure (de)compression parameters (incl. allocating workspace memory). The (de)compression methods take a struct comp_request, which was mimicked after the z_stream object in zlib, and contains buffer pointer and length pairs for input and output. The setup methods take an opaque parameter pointer and length pair. Parameters are supposed to be encoded using netlink attributes, whose meanings depend on the actual (name of the) (de)compression algorithm. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-04 00:05:33 -07:00
tristate
select CRYPTO_ALGAPI2
crypto: akcipher - add PKE API Add Public Key Encryption API. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Made CRYPTO_AKCIPHER invisible like other type config options. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16 11:30:55 -06:00
config CRYPTO_AKCIPHER2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_AKCIPHER
tristate
select CRYPTO_AKCIPHER2
select CRYPTO_ALGAPI
crypto: rsa - add a new rsa generic implementation Add a new rsa generic SW implementation. This implements only cryptographic primitives. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Added select on ASN1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16 11:31:01 -06:00
config CRYPTO_RSA
tristate "RSA algorithm"
select AKCIPHER
select MPILIB
select ASN1
help
Generic implementation of the RSA public key algorithm.
[CRYPTO] api: Add cryptomgr The cryptomgr module is a simple manager of crypto algorithm instances. It ensures that parameterised algorithms of the type tmpl(alg) (e.g., cbc(aes)) are always created. This is meant to satisfy the needs for most users. For more complex cases such as deeper combinations or multiple parameters, a netlink module will be created which allows arbitrary expressions to be parsed in user-space. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-20 19:31:44 -06:00
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
select CRYPTO_MANAGER2
[CRYPTO] api: Add cryptomgr The cryptomgr module is a simple manager of crypto algorithm instances. It ensures that parameterised algorithms of the type tmpl(alg) (e.g., cbc(aes)) are always created. This is meant to satisfy the needs for most users. For more complex cases such as deeper combinations or multiple parameters, a netlink module will be created which allows arbitrary expressions to be parsed in user-space. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-20 19:31:44 -06:00
help
Create default cryptographic template instantiations such as
cbc(aes).
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
select CRYPTO_AEAD2
select CRYPTO_HASH2
select CRYPTO_BLKCIPHER2
crypto: pcomp - Fix illegal Kconfig configuration The PCOMP Kconfig entry current allows the following combination which is illegal: ZLIB=y PCOMP=y ALGAPI=m ALGAPI2=y MANAGER=m MANAGER2=m This patch fixes this by adding PCOMP2 so that PCOMP can select ALGAPI to propagate the setting to MANAGER2. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-06-03 04:33:06 -06:00
select CRYPTO_PCOMP2
crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-10 05:29:44 -07:00
crypto: Add userspace configuration API This patch adds a basic userspace configuration API for the crypto layer. With this it is possible to instantiate, remove and to show crypto algorithms from userspace. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 23:23:50 -06:00
config CRYPTO_USER
tristate "Userspace cryptographic algorithm configuration"
crypto: user - Depend on NET instead of selecting it Selecting NET causes all sorts of issues, including a dependency loop involving bluetooth. This patch makes it a dependency instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-31 19:12:43 -06:00
depends on NET
crypto: Add userspace configuration API This patch adds a basic userspace configuration API for the crypto layer. With this it is possible to instantiate, remove and to show crypto algorithms from userspace. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 23:23:50 -06:00
select CRYPTO_MANAGER
help
crypto: fix typo in crypto/Kconfig Fix a typo in the Kconfig file help text. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-08 23:29:20 -07:00
Userspace configuration for cryptographic instantiations such as
crypto: Add userspace configuration API This patch adds a basic userspace configuration API for the crypto layer. With this it is possible to instantiate, remove and to show crypto algorithms from userspace. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 23:23:50 -06:00
cbc(aes).
crypto: testmgr - Fix test disabling option This patch fixes a serious bug in the test disabling patch where it can cause an spurious load of the cryptomgr module even when it's compiled in. It also negates the test disabling option so that its absence causes tests to be enabled. The Kconfig option is also now behind EMBEDDED. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-05 19:40:28 -06:00
config CRYPTO_MANAGER_DISABLE_TESTS
bool "Disable run-time self tests"
crypto: testmgr - Default to no tests On Thu, Aug 05, 2010 at 07:01:21PM -0700, Linus Torvalds wrote: > On Thu, Aug 5, 2010 at 6:40 PM, Herbert Xu <herbert@gondor.hengli.com.au> wrote: > > > > -config CRYPTO_MANAGER_TESTS > > - bool "Run algolithms' self-tests" > > - default y > > - depends on CRYPTO_MANAGER2 > > +config CRYPTO_MANAGER_DISABLE_TESTS > > + bool "Disable run-time self tests" > > + depends on CRYPTO_MANAGER2 && EMBEDDED > > Why do you still want to force-enable those tests? I was going to > complain about the "default y" anyway, now I'm _really_ complaining, > because you've now made it impossible to disable those tests. Why? As requested, this patch sets the default to y and removes the EMBEDDED dependency. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-05 20:34:00 -06:00
default y
depends on CRYPTO_MANAGER2
crypto: testmgr - add an option to disable cryptoalgos' self-tests By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus self-tests will still run, but it is now possible to disable them to gain some time during bootup. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-06-03 04:53:43 -06:00
help
crypto: testmgr - Fix test disabling option This patch fixes a serious bug in the test disabling patch where it can cause an spurious load of the cryptomgr module even when it's compiled in. It also negates the test disabling option so that its absence causes tests to be enabled. The Kconfig option is also now behind EMBEDDED. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-05 19:40:28 -06:00
Disable run-time self tests that normally take place at
algorithm registration.
crypto: testmgr - add an option to disable cryptoalgos' self-tests By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus self-tests will still run, but it is now possible to disable them to gain some time during bootup. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-06-03 04:53:43 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_GF128MUL
crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig CRYPTO_GF128MUL does not select EXPERIMENTAL anymore so remove the "(EXPERIMENTAL)" from its name. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-13 03:53:22 -07:00
tristate "GF(2^128) multiplication functions"
[CRYPTO] xcbc: New algorithm This is core code of XCBC. XCBC is an algorithm that forms a MAC algorithm out of a cipher algorithm. For example, AES-XCBC-MAC is a MAC algorithm based on the AES cipher algorithm. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-27 21:15:24 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Efficient table driven implementation of multiplications in the
field GF(2^128). This is needed by some cypher modes. This
option will be selected automatically if you select such a
cipher mode. Only select this option by hand if you expect to load
an external module that requires these functions.
[CRYPTO] xcbc: New algorithm This is core code of XCBC. XCBC is an algorithm that forms a MAC algorithm out of a cipher algorithm. For example, AES-XCBC-MAC is a MAC algorithm based on the AES cipher algorithm. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-27 21:15:24 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
config CRYPTO_NULL
tristate "Null algorithms"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
[CRYPTO] null: Add missing Kconfig dependency on BLKCIPHER This patch fixes the following build error caused by commit 3631c650c495d61b1dabf32eb26b46873636e918: <-- snip --> ... LD .tmp_vmlinux1 crypto/built-in.o: In function `skcipher_null_crypt': crypto_null.c:(.text+0x3d14): undefined reference to `blkcipher_walk_virt' crypto_null.c:(.text+0x3d14): relocation truncated to fit: R_MIPS_26 against `blkcipher_walk_virt' crypto/built-in.o: In function `$L32': crypto_null.c:(.text+0x3d54): undefined reference to `blkcipher_walk_done' crypto_null.c:(.text+0x3d54): relocation truncated to fit: R_MIPS_26 against `blkcipher_walk_done' crypto/built-in.o:(.data+0x2e8): undefined reference to `crypto_blkcipher_type' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-02-17 18:00:05 -07:00
select CRYPTO_BLKCIPHER
crypto: null - Switch to shash This patch changes digest_null to the new shash interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-07 17:09:56 -07:00
select CRYPTO_HASH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
These are 'Null' algorithms, used by IPsec, which do nothing.
crypto: pcrypt - Add pcrypt crypto parallelization wrapper This patch adds a parallel crypto template that takes a crypto algorithm and converts it to process the crypto transforms in parallel. For the moment only aead algorithms are supported. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-01-06 21:57:19 -07:00
config CRYPTO_PCRYPT
crypto: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-10-02 12:16:49 -06:00
tristate "Parallel crypto engine"
depends on SMP
crypto: pcrypt - Add pcrypt crypto parallelization wrapper This patch adds a parallel crypto template that takes a crypto algorithm and converts it to process the crypto transforms in parallel. For the moment only aead algorithms are supported. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-01-06 21:57:19 -07:00
select PADATA
select CRYPTO_MANAGER
select CRYPTO_AEAD
help
This converts an arbitrary crypto algorithm into a parallel
algorithm that executes in kernel threads.
crypto: api - Use dedicated workqueue for crypto subsystem Use dedicated workqueue for crypto subsystem A dedicated workqueue named kcrypto_wq is created to be used by crypto subsystem. The system shared keventd_wq is not suitable for encryption/decryption, because of potential starvation problem. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 23:33:40 -07:00
config CRYPTO_WORKQUEUE
tristate
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CRYPTD
tristate "Software async crypto daemon"
select CRYPTO_BLKCIPHER
[CRYPTO] cryptd: Add asynchronous hash support This patch adds asynchronous hash support to crypto daemon. Signed-off-by: Loc Ho <lho@amcc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-14 07:23:00 -06:00
select CRYPTO_HASH
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
select CRYPTO_MANAGER
crypto: cryptd - Per-CPU thread implementation based on kcrypto_wq Original cryptd thread implementation has scalability issue, this patch solve the issue with a per-CPU thread implementation. struct cryptd_queue is defined to be a per-CPU queue, which holds one struct cryptd_cpu_queue for each CPU. In struct cryptd_cpu_queue, a struct crypto_queue holds all requests for the CPU, a struct work_struct is used to run all requests for the CPU. Testing based on dm-crypt on an Intel Core 2 E6400 (two cores) machine shows 19.2% performance gain. The testing script is as follow: -------------------- script begin --------------------------- #!/bin/sh dmc_create() { # Create a crypt device using dmsetup dmsetup create $2 --table "0 `blockdev --getsize $1` crypt cbc(aes-asm)?cryptd?plain:plain babebabebabebabebabebabebabebabe 0 $1 0" } dmsetup remove crypt0 dmsetup remove crypt1 dd if=/dev/zero of=/dev/ram0 bs=1M count=4 >& /dev/null dd if=/dev/zero of=/dev/ram1 bs=1M count=4 >& /dev/null dmc_create /dev/ram0 crypt0 dmc_create /dev/ram1 crypt1 cat >tr.sh <<EOF #!/bin/sh for n in \$(seq 10); do dd if=/dev/dm-0 of=/dev/null >& /dev/null & dd if=/dev/dm-1 of=/dev/null >& /dev/null & done wait EOF for n in $(seq 10); do /usr/bin/time sh tr.sh done rm tr.sh -------------------- script end --------------------------- The separator of dm-crypt parameter is changed from "-" to "?", because "-" is used in some cipher driver name too, and cryptds need to specify cipher driver name instead of cipher name. The test result on an Intel Core2 E6400 (two cores) is as follow: without patch: -----------------wo begin -------------------------- 0.04user 0.38system 0:00.39elapsed 107%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6566minor)pagefaults 0swaps 0.07user 0.35system 0:00.35elapsed 121%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6567minor)pagefaults 0swaps 0.06user 0.34system 0:00.30elapsed 135%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.37system 0:00.36elapsed 119%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6607minor)pagefaults 0swaps 0.06user 0.36system 0:00.35elapsed 120%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.37system 0:00.31elapsed 136%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6594minor)pagefaults 0swaps 0.04user 0.34system 0:00.30elapsed 126%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6597minor)pagefaults 0swaps 0.06user 0.32system 0:00.31elapsed 125%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6571minor)pagefaults 0swaps 0.06user 0.34system 0:00.31elapsed 134%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6581minor)pagefaults 0swaps 0.05user 0.38system 0:00.31elapsed 138%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6600minor)pagefaults 0swaps -----------------wo end -------------------------- with patch: ------------------w begin -------------------------- 0.02user 0.31system 0:00.24elapsed 141%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6554minor)pagefaults 0swaps 0.05user 0.34system 0:00.31elapsed 127%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6606minor)pagefaults 0swaps 0.07user 0.33system 0:00.26elapsed 155%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6559minor)pagefaults 0swaps 0.07user 0.32system 0:00.26elapsed 151%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.34system 0:00.26elapsed 150%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6603minor)pagefaults 0swaps 0.03user 0.36system 0:00.31elapsed 124%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.04user 0.35system 0:00.26elapsed 147%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6586minor)pagefaults 0swaps 0.03user 0.37system 0:00.27elapsed 146%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.04user 0.36system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6594minor)pagefaults 0swaps 0.04user 0.35system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6557minor)pagefaults 0swaps ------------------w end -------------------------- The middle value of elapsed time is: wo cryptwq: 0.31 w cryptwq: 0.26 The performance gain is about (0.31-0.26)/0.26 = 0.192. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 23:42:19 -07:00
select CRYPTO_WORKQUEUE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
This is a generic software asynchronous crypto daemon that
converts an arbitrary synchronous software crypto algorithm
into an asynchronous algorithm that executes in a kernel thread.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: sha-mb - multibuffer crypto infrastructure This patch introduces the multi-buffer crypto daemon which is responsible for submitting crypto jobs in a work queue to the responsible multi-buffer crypto algorithm. The idea of the multi-buffer algorihtm is to put data streams from multiple jobs in a wide (AVX2) register and then take advantage of SIMD instructions to do crypto computation on several buffers simultaneously. The multi-buffer crypto daemon is also responsbile for flushing the remaining buffers to complete the computation if no new buffers arrive for a while. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-31 11:29:51 -06:00
config CRYPTO_MCRYPTD
tristate "Software async multi-buffer crypto daemon"
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
select CRYPTO_MANAGER
select CRYPTO_WORKQUEUE
help
This is a generic software asynchronous crypto daemon that
provides the kernel thread to assist multi-buffer crypto
algorithms for submitting jobs and flushing jobs in multi-buffer
crypto algorithms. Multi-buffer crypto algorithms are executed
in the context of this kernel thread and drivers can post
crypto: mcryptd - Fix typos in CRYPTO_MCRYPTD description Signed-off-by: Ted Percival <ted@tedp.id.au> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-04 01:18:21 -06:00
their crypto request asynchronously to be processed by this daemon.
crypto: sha-mb - multibuffer crypto infrastructure This patch introduces the multi-buffer crypto daemon which is responsible for submitting crypto jobs in a work queue to the responsible multi-buffer crypto algorithm. The idea of the multi-buffer algorihtm is to put data streams from multiple jobs in a wide (AVX2) register and then take advantage of SIMD instructions to do crypto computation on several buffers simultaneously. The multi-buffer crypto daemon is also responsbile for flushing the remaining buffers to complete the computation if no new buffers arrive for a while. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-31 11:29:51 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_AUTHENC
tristate "Authenc support"
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_HASH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Authenc: Combined mode wrapper for IPsec.
This is required for IPSec.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_TEST
tristate "Testing module"
depends on m
crypto: cryptomgr - Add test infrastructure This patch moves the newly created alg_test infrastructure into cryptomgr. This shall allow us to use it for testing at algorithm registrations. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-31 03:08:25 -06:00
select CRYPTO_MANAGER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Quick & dirty crypto test module.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: create generic version of ablk_helper Create a generic version of ablk_helper so it can be reused by other architectures. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:40 -06:00
config CRYPTO_ABLK_HELPER
crypto: ablk_helper - move ablk_* functions from serpent-sse2/avx glue code to shared module Move ablk-* functions to separate module to share common code between cipher implementations. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:06:58 -06:00
tristate
select CRYPTO_CRYPTD
crypto: serpent-sse2 - split generic glue code to new helper module Now that serpent-sse2 glue code has been made generic, it can be split to separate module. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:19 -06:00
config CRYPTO_GLUE_HELPER_X86
tristate
depends on X86
select CRYPTO_ALGAPI
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Authenticated Encryption with Associated Data"
[CRYPTO] sha256-generic: Extend sha256_generic.c to support SHA-224 Resubmitting this patch which extends sha256_generic.c to support SHA-224 as described in FIPS 180-2 and RFC 3874. HMAC-SHA-224 as described in RFC4231 is then supported through the hmac interface. Patch includes test vectors for SHA-224 and HMAC-SHA-224. SHA-224 chould be chosen as a hash algorithm when 112 bits of security strength is required. Patch generated against the 2.6.24-rc1 kernel and tested against 2.6.24-rc1-git14 which includes fix for scatter gather implementation for HMAC. Signed-off-by: Jonathan Lynch <jonathan.lynch@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-10 05:08:25 -07:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CCM
tristate "CCM support"
select CRYPTO_CTR
select CRYPTO_AEAD
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Support for Counter with CBC MAC. Required for IPsec.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_GCM
tristate "GCM/GMAC support"
select CRYPTO_CTR
select CRYPTO_AEAD
crypto: gcm - Use GHASH digest algorithm Remove the dedicated GHASH implementation in GCM, and uses the GHASH digest algorithm instead. This will make GCM uses hardware accelerated GHASH implementation automatically if available. ahash instead of shash interface is used, because some hardware accelerated GHASH implementation needs asynchronous interface. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-05 23:34:26 -06:00
select CRYPTO_GHASH
crypto: gcm - make GMAC work when dst and src are different The GMAC code assumes that dst==src, which causes problems when trying to add rfc4543(gcm(aes)) test vectors. So fix this code to work when source and destination buffer are different. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-07 07:43:41 -06:00
select CRYPTO_NULL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Support for Galois/Counter Mode (GCM) and Galois Message
Authentication Code (GMAC). Required for IPSec.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539 This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and asynchronous operations, even if we currently have no async chacha20 or poly1305 drivers. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-01 05:44:00 -06:00
config CRYPTO_CHACHA20POLY1305
tristate "ChaCha20-Poly1305 AEAD support"
select CRYPTO_CHACHA20
select CRYPTO_POLY1305
select CRYPTO_AEAD
help
ChaCha20-Poly1305 AEAD support, RFC7539.
Support for the AEAD wrapper using the ChaCha20 stream cipher combined
with the Poly1305 authenticator. It is defined in RFC7539 for use in
IETF protocols.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_SEQIV
tristate "Sequence Number IV Generator"
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
crypto: seqiv - Add support for new AEAD interface This patch converts the seqiv IV generator to work with the new AEAD interface where IV generators are just normal AEAD algorithms. Full backwards compatibility is paramount at this point since no users have yet switched over to the new interface. Nor can they switch to the new interface until IV generation is fully supported by it. So this means we are adding two versions of seqiv alongside the existing one. The first one is the one that will be used when the underlying AEAD algorithm has switched over to the new AEAD interface. The second one handles the current case where the underlying AEAD algorithm still uses the old interface. Both versions export themselves through the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-21 01:11:13 -06:00
select CRYPTO_NULL
crypto: rng - Make DRBG the default RNG This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT that simply selects the DRBG. This new option is then selected by the IV generators. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 00:49:31 -06:00
select CRYPTO_RNG_DEFAULT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
This IV generator generates an IV based on a sequence number by
xoring it with a salt. This algorithm is mainly useful for CTR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: echainiv - Add encrypted chain IV generator This patch adds a new AEAD IV generator echainiv. It is intended to replace the existing skcipher IV generator eseqiv. If the underlying AEAD algorithm is using the old AEAD interface, then echainiv will simply use its IV generator. Otherwise, echainiv will encrypt a counter just like eseqiv but it'll first xor it against a previously stored IV similar to chainiv. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-21 01:11:15 -06:00
config CRYPTO_ECHAINIV
tristate "Encrypted Chain IV Generator"
select CRYPTO_AEAD
select CRYPTO_NULL
crypto: rng - Make DRBG the default RNG This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT that simply selects the DRBG. This new option is then selected by the IV generators. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 00:49:31 -06:00
select CRYPTO_RNG_DEFAULT
crypto: echainiv - Set Kconfig default to m As this is required by many IPsec algorithms, let's set the default to m. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 00:49:29 -06:00
default m
crypto: echainiv - Add encrypted chain IV generator This patch adds a new AEAD IV generator echainiv. It is intended to replace the existing skcipher IV generator eseqiv. If the underlying AEAD algorithm is using the old AEAD interface, then echainiv will simply use its IV generator. Otherwise, echainiv will encrypt a counter just like eseqiv but it'll first xor it against a previously stored IV similar to chainiv. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-21 01:11:15 -06:00
help
This IV generator generates an IV based on the encryption of
a sequence number xored with a salt. This is the default
algorithm for CBC.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Block modes"
[CRYPTO] lib: table driven multiplications in GF(2^128) A lot of cypher modes need multiplications in GF(2^128). LRW, ABL, GCM... I use functions from this library in my LRW implementation and I will also use them in my ABL (Arbitrary Block Length, an unencumbered (correct me if I am wrong, wide block cipher mode). Elements of GF(2^128) must be presented as u128 *, it encourages automatic and proper alignment. The library contains support for two different representations of GF(2^128), see the comment in gf128mul.h. There different levels of optimization (memory/speed tradeoff). The code is based on work by Dr Brian Gladman. Notable changes: - deletion of two optimization modes - change from u32 to u64 for faster handling on 64bit machines - support for 'bbe' representation in addition to the, already implemented, 'lle' representation. - move 'inline void' functions from header to 'static void' in the source file - update to use the linux coding style conventions The original can be found at: http://fp.gladman.plus.com/AES/modes.vc8.19-06-06.zip The copyright (and GPL statement) of the original author is preserved. Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-11-29 00:59:44 -07:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CBC
tristate "CBC support"
[CRYPTO] cipher: Added block ciphers for CBC/ECB This patch adds two block cipher algorithms, CBC and ECB. These are implemented as templates on top of existing single-block cipher algorithms. They invoke the single-block cipher through the new encrypt_one/decrypt_one interface. This also optimises the in-place encryption and decryption to remove the cost of an IV copy each round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-20 19:44:08 -06:00
select CRYPTO_BLKCIPHER
[CRYPTO] api: Select cryptomgr where needed Since cryptomgr is the only way to construct algorithm instances for now it makes sense to let the templates depend on it as otherwise it may be left off inadvertently. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-16 05:28:58 -06:00
select CRYPTO_MANAGER
[CRYPTO] cipher: Added block ciphers for CBC/ECB This patch adds two block cipher algorithms, CBC and ECB. These are implemented as templates on top of existing single-block cipher algorithms. They invoke the single-block cipher through the new encrypt_one/decrypt_one interface. This also optimises the in-place encryption and decryption to remove the cost of an IV copy each round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-20 19:44:08 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
CBC: Cipher Block Chaining mode
This block cipher algorithm is required for IPSec.
[CRYPTO] cipher: Added block ciphers for CBC/ECB This patch adds two block cipher algorithms, CBC and ECB. These are implemented as templates on top of existing single-block cipher algorithms. They invoke the single-block cipher through the new encrypt_one/decrypt_one interface. This also optimises the in-place encryption and decryption to remove the cost of an IV copy each round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-20 19:44:08 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CTR
tristate "CTR support"
[CRYPTO] cipher: Added block ciphers for CBC/ECB This patch adds two block cipher algorithms, CBC and ECB. These are implemented as templates on top of existing single-block cipher algorithms. They invoke the single-block cipher through the new encrypt_one/decrypt_one interface. This also optimises the in-place encryption and decryption to remove the cost of an IV copy each round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-20 19:44:08 -06:00
select CRYPTO_BLKCIPHER
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
select CRYPTO_SEQIV
[CRYPTO] api: Select cryptomgr where needed Since cryptomgr is the only way to construct algorithm instances for now it makes sense to let the templates depend on it as otherwise it may be left off inadvertently. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-16 05:28:58 -06:00
select CRYPTO_MANAGER
[CRYPTO] cipher: Added block ciphers for CBC/ECB This patch adds two block cipher algorithms, CBC and ECB. These are implemented as templates on top of existing single-block cipher algorithms. They invoke the single-block cipher through the new encrypt_one/decrypt_one interface. This also optimises the in-place encryption and decryption to remove the cost of an IV copy each round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-20 19:44:08 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
CTR: Counter mode
[CRYPTO] cipher: Added block ciphers for CBC/ECB This patch adds two block cipher algorithms, CBC and ECB. These are implemented as templates on top of existing single-block cipher algorithms. They invoke the single-block cipher through the new encrypt_one/decrypt_one interface. This also optimises the in-place encryption and decryption to remove the cost of an IV copy each round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-20 19:44:08 -06:00
This block cipher algorithm is required for IPSec.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CTS
tristate "CTS support"
select CRYPTO_BLKCIPHER
help
CTS: Cipher Text Stealing
This is the Cipher Text Stealing mode as described by
Section 8 of rfc2040 and referenced by rfc3962.
(rfc3962 includes errata information in its Appendix A)
This mode is required for Kerberos gss mechanism support
for AES encryption.
config CRYPTO_ECB
tristate "ECB support"
[CRYPTO] pcbc: Add Propagated CBC template Add PCBC crypto template support as used by RxRPC. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-15 18:09:02 -07:00
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
ECB: Electronic CodeBook mode
This is the simplest block cipher algorithm. It simply encrypts
the input block by block.
[CRYPTO] pcbc: Add Propagated CBC template Add PCBC crypto template support as used by RxRPC. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-15 18:09:02 -07:00
[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode Main module, this implements the Liskov Rivest Wagner block cipher mode in the new blockcipher API. The implementation is based on ecb.c. The LRW-32-AES specification I used can be found at: http://grouper.ieee.org/groups/1619/email/pdf00017.pdf It implements the optimization specified as optional in the specification, and in addition it uses optimized multiplication routines from gf128mul.c. Since gf128mul.[ch] is not tested on bigendian, this cipher mode may currently fail badly on bigendian machines. Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-11-25 15:43:10 -07:00
config CRYPTO_LRW
crypto: lrw - remove dependency on EXPERIMENTAL LRW has been EXPERIMENTAL since it was introduced in 2006. I'd say by now it has seen enough testing to justify removal of EXPERIMENTAL tag. CC: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-13 03:52:51 -07:00
tristate "LRW support"
[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode Main module, this implements the Liskov Rivest Wagner block cipher mode in the new blockcipher API. The implementation is based on ecb.c. The LRW-32-AES specification I used can be found at: http://grouper.ieee.org/groups/1619/email/pdf00017.pdf It implements the optimization specified as optional in the specification, and in addition it uses optimized multiplication routines from gf128mul.c. Since gf128mul.[ch] is not tested on bigendian, this cipher mode may currently fail badly on bigendian machines. Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-11-25 15:43:10 -07:00
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_GF128MUL
help
LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable
narrow block cipher mode for dm-crypt. Use it with cipher
specification string aes-lrw-benbi, the key must be 256, 320 or 384.
The first 128, 192 or 256 bits in the key are used for AES and the
rest is used to tie each cipher block to its logical position.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_PCBC
tristate "PCBC support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
PCBC: Propagating Cipher Block Chaining mode
This block cipher algorithm is required for RxRPC.
[CRYPTO] xts: XTS blockcipher mode implementation without partial blocks XTS currently considered to be the successor of the LRW mode by the IEEE1619 workgroup. LRW was discarded, because it was not secure if the encyption key itself is encrypted with LRW. XTS does not have this problem. The implementation is pretty straightforward, a new function was added to gf128mul to handle GF(128) elements in ble format. Four testvectors from the specification http://grouper.ieee.org/groups/1619/email/pdf00086.pdf were added, and they verify on my system. Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-19 06:23:13 -06:00
config CRYPTO_XTS
crypto: xts - remove dependency on EXPERIMENTAL XTS has been EXPERIMENTAL since it was introduced in 2007. I'd say by now it has seen enough testing to justify removal of EXPERIMENTAL tag. CC: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-13 03:52:56 -07:00
tristate "XTS support"
[CRYPTO] xts: XTS blockcipher mode implementation without partial blocks XTS currently considered to be the successor of the LRW mode by the IEEE1619 workgroup. LRW was discarded, because it was not secure if the encyption key itself is encrypted with LRW. XTS does not have this problem. The implementation is pretty straightforward, a new function was added to gf128mul to handle GF(128) elements in ble format. Four testvectors from the specification http://grouper.ieee.org/groups/1619/email/pdf00086.pdf were added, and they verify on my system. Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-19 06:23:13 -06:00
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_GF128MUL
help
XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
key size 256, 384 or 512 bits. This implementation currently
can't handle a sectorsize which is not a multiple of 16 bytes.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Hash modes"
crypto: add CMAC support to CryptoAPI Patch adds support for NIST recommended block cipher mode CMAC to CryptoAPI. This work is based on Tom St Denis' earlier patch, http://marc.info/?l=linux-crypto-vger&m=135877306305466&w=2 Cc: Tom St Denis <tstdenis@elliptictech.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-08 01:48:44 -06:00
config CRYPTO_CMAC
tristate "CMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
Cipher-based Message Authentication Code (CMAC) specified by
The National Institute of Standards and Technology (NIST).
https://tools.ietf.org/html/rfc4493
http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_HMAC
tristate "HMAC support"
select CRYPTO_HASH
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-22 18:50:32 -06:00
select CRYPTO_MANAGER
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
HMAC: Keyed-Hashing for Message Authentication (RFC2104).
This is required for IPSec.
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-22 18:50:32 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_XCBC
tristate "XCBC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
[CRYPTO] cts: Add CTS mode required for Kerberos AES support Implement CTS wrapper for CBC mode required for support of AES encryption support for Kerberos (rfc3962). Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-24 07:26:16 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
XCBC: Keyed-Hashing with encryption algorithm
http://www.ietf.org/rfc/rfc3566.txt
http://csrc.nist.gov/encryption/modes/proposedmodes/
xcbc-mac/xcbc-mac-spec.pdf
[CRYPTO] cts: Add CTS mode required for Kerberos AES support Implement CTS wrapper for CBC mode required for support of AES encryption support for Kerberos (rfc3962). Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-24 07:26:16 -06:00
crypto: vmac - New hash algorithm for intel_txt support This patch adds VMAC (a fast MAC) support into crypto framework. Signed-off-by: Shane Wang <shane.wang@intel.com> Signed-off-by: Joseph Cihula <joseph.cihula@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-09-02 04:05:22 -06:00
config CRYPTO_VMAC
tristate "VMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
VMAC is a message authentication algorithm designed for
very high speed on 64-bit architectures.
See also:
<http://fastcrypto.org/vmac>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Digest"
[CRYPTO] gcm: New algorithm Add GCM/GMAC support to cryptoapi. GCM (Galois/Counter Mode) is an AEAD mode of operations for any block cipher with a block size of 16. The typical example is AES-GCM. Signed-off-by: Mikko Herranen <mh1@iki.fi> Reviewed-by: Mika Kukkonen <mika.kukkonen@nsn.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-26 07:24:11 -07:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CRC32C
tristate "CRC32c CRC algorithm"
crypto: crc32c - Add ahash implementation This patch reimplements crc32c using the ahash interface. This allows one tfm to be used by an unlimited number of users provided that they all use the same key (which all current crc32c users do). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-08 06:54:28 -06:00
select CRYPTO_HASH
crypto: crc32c should use library implementation Since lib/crc32.c now provides crc32c, remove the software implementation here and call the library function instead. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Bob Pearson <rpearson@systemfabricworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:02:25 -06:00
select CRC32
[CRYPTO] ccm: Added CCM mode This patch adds Counter with CBC-MAC (CCM) support. RFC 3610 and NIST Special Publication 800-38C were referenced. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-12 05:25:13 -07:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
by iSCSI for header and data digests and by others.
libcrc32c: Move implementation to crypto crc32c This patch swaps the role of libcrc32c and crc32c. Previously the implementation was in libcrc32c and crc32c was a wrapper. Now the code is in crc32c and libcrc32c just calls the crypto layer. The reason for the change is to tap into the algorithm selection capability of the crypto API so that optimised implementations such as the one utilising Intel's CRC32C instruction can be used where available. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-07 00:11:47 -07:00
See Castagnoli93. Module will be crc32c.
[CRYPTO] ccm: Added CCM mode This patch adds Counter with CBC-MAC (CCM) support. RFC 3610 and NIST Special Publication 800-38C were referenced. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-12 05:25:13 -07:00
crypto: crc32c - Use Intel CRC32 instruction From NHM processor onward, Intel processors can support hardware accelerated CRC32c algorithm with the new CRC32 instruction in SSE 4.2 instruction set. The patch detects the availability of the feature, and chooses the most proper way to calculate CRC32c checksum. Byte code instructions are used for compiler compatibility. No MMX / XMM registers is involved in the implementation. Signed-off-by: Austin Zhang <austin.zhang@intel.com> Signed-off-by: Kent Liu <kent.liu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-06 19:57:03 -06:00
config CRYPTO_CRC32C_INTEL
tristate "CRC32c INTEL hardware acceleration"
depends on X86
select CRYPTO_HASH
help
In Intel processor with SSE4.2 supported, the processor will
support CRC32C implementation using hardware accelerated CRC32
instruction. This option will create 'crc32c-intel' module,
which will enable any routine to use the CRC32 instruction to
gain performance compared with software implementation.
Module will be crc32c-intel.
sparc64: Add CRC32C driver making use of the new crc32c opcode. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 21:47:36 -06:00
config CRYPTO_CRC32C_SPARC64
tristate "CRC32c CRC algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_HASH
select CRC32
help
CRC32c CRC algorithm implemented using sparc64 crypto instructions,
when available.
crypto: crc32 - add crc32 pclmulqdq implementation and wrappers for table implementation This patch adds crc32 algorithms to shash crypto api. One is wrapper to gerneric crc32_le function. Second is crc32 pclmulqdq implementation. It use hardware provided PCLMULQDQ instruction to accelerate the CRC32 disposal. This instruction present from Intel Westmere and AMD Bulldozer CPUs. For intel core i5 I got 450MB/s for table implementation and 2100MB/s for pclmulqdq implementation. Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-10 07:54:59 -07:00
config CRYPTO_CRC32
tristate "CRC32 CRC algorithm"
select CRYPTO_HASH
select CRC32
help
CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
Shash crypto api wrappers to crc32_le function.
config CRYPTO_CRC32_PCLMUL
tristate "CRC32 PCLMULQDQ hardware acceleration"
depends on X86
select CRYPTO_HASH
select CRC32
help
From Intel Westmere and AMD Bulldozer processor with SSE4.2
and PCLMULQDQ supported, the processor will support
CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
instruction. This option will create 'crc32-plcmul' module,
which will enable any routine to use the CRC-32-IEEE 802.3 checksum
and gain better performance as compared with the table implementation.
Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" This patch reinstates commits 67822649d7305caf3dd50ed46c27b99c94eff996 39761214eefc6b070f29402aa1165f24d789b3f7 0b95a7f85718adcbba36407ef88bba0a7379ed03 31d939625a9a20b1badd2d4e6bf6fd39fa523405 2d31e518a42828df7877bca23a958627d60408bc Now that module softdeps are in the kernel we can use that to resolve the boot issue which cause the revert. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-06 20:56:26 -06:00
config CRYPTO_CRCT10DIF
tristate "CRCT10DIF algorithm"
select CRYPTO_HASH
help
CRC T10 Data Integrity Field computation is being cast as
a crypto transform. This allows for faster crc t10 diff
transforms to be used if they are available.
config CRYPTO_CRCT10DIF_PCLMUL
tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
depends on X86 && 64BIT && CRC_T10DIF
select CRYPTO_HASH
help
For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
CRC T10 DIF PCLMULQDQ computation can be hardware
accelerated PCLMULQDQ instruction. This option will create
'crct10dif-plcmul' module, which is faster when computing the
crct10dif checksum as compared with the generic table implementation.
crypto: ghash - Add GHASH digest algorithm for GCM GHASH is implemented as a shash algorithm. The actual implementation is copied from gcm.c. This makes it possible to add architecture/hardware accelerated GHASH implementation. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-05 23:32:38 -06:00
config CRYPTO_GHASH
tristate "GHASH digest algorithm"
select CRYPTO_GF128MUL
help
GHASH is message digest algorithm for GCM (Galois/Counter Mode).
crypto: poly1305 - Add a generic Poly1305 authenticator implementation Poly1305 is a fast message authenticator designed by Daniel J. Bernstein. It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305 AEAD for use in IETF protocols. This is a portable C implementation of the algorithm without architecture specific optimizations, based on public domain code by Daniel J. Bernstein and Andrew Moon. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-01 05:43:58 -06:00
config CRYPTO_POLY1305
tristate "Poly1305 authenticator algorithm"
help
Poly1305 authenticator algorithm, RFC7539.
Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the portable C implementation of Poly1305.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_MD4
tristate "MD4 digest algorithm"
crypto: md4 - Switch to shash This patch changes md4 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-03 04:55:27 -07:00
select CRYPTO_HASH
[CRYPTO] cryptd: Add software async crypto daemon This patch adds the cryptd module which is a template that takes a synchronous software crypto algorithm and converts it to an asynchronous one by executing it in a kernel thread. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-04-16 04:49:20 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
MD4 message digest algorithm (RFC1320).
[CRYPTO] cryptd: Add software async crypto daemon This patch adds the cryptd module which is a template that takes a synchronous software crypto algorithm and converts it to an asynchronous one by executing it in a kernel thread. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-04-16 04:49:20 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_MD5
tristate "MD5 digest algorithm"
crypto: md5 - Switch to shash This patch changes md5 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-03 04:57:12 -07:00
select CRYPTO_HASH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
MD5 message digest algorithm (RFC1321).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: octeon - enable OCTEON MD5 module selection Enable user to select OCTEON MD5 module. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-21 13:54:02 -07:00
config CRYPTO_MD5_OCTEON
tristate "MD5 digest algorithm (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_MD5
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
using OCTEON crypto instructions, when available.
crypto: powerpc/md5 - kernel config Integrate the module into the kernel config tree. Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-01 11:30:46 -07:00
config CRYPTO_MD5_PPC
tristate "MD5 digest algorithm (PPC)"
depends on PPC
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
in PPC assembler.
sparc64: Add MD5 driver making use of the 'md5' instruction. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-19 22:51:26 -06:00
config CRYPTO_MD5_SPARC64
tristate "MD5 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_MD5
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
using sparc64 crypto instructions, when available.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_MICHAEL_MIC
tristate "Michael MIC keyed digest algorithm"
crypto: michael_mic - Switch to shash This patch changes michael_mic to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-07 04:35:38 -07:00
select CRYPTO_HASH
[CRYPTO] fcrypt: Add FCrypt from RxRPC Add a crypto module to provide FCrypt encryption as used by RxRPC. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-15 18:13:14 -07:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Michael MIC is used for message integrity protection in TKIP
(IEEE 802.11i). This algorithm is required for TKIP, but it
should not be used for other purposes because of the weakness
of the algorithm.
[CRYPTO] fcrypt: Add FCrypt from RxRPC Add a crypto module to provide FCrypt encryption as used by RxRPC. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-15 18:13:14 -07:00
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
config CRYPTO_RMD128
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
tristate "RIPEMD-128 digest algorithm"
crypto: rmd128 - Switch to shash This patch changes rmd128 to the new shash interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-07 18:10:40 -07:00
select CRYPTO_HASH
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
help
RIPEMD-128 (ISO/IEC 10118-3:2004).
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
RIPEMD-128 is a 128-bit cryptographic hash function. It should only
doc: Kconfig: `to be' -> `be' Also, a comma was inserted to offset a modifier. Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-08 22:02:31 -06:00
be used as a secure replacement for RIPEMD. For other use cases,
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
RIPEMD-160 should be used.
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
config CRYPTO_RMD160
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
tristate "RIPEMD-160 digest algorithm"
crypto: rmd160 - Switch to shash This patch changes rmd160 to the new shash interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-07 18:18:51 -07:00
select CRYPTO_HASH
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
help
RIPEMD-160 (ISO/IEC 10118-3:2004).
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
to be used as a secure replacement for the 128-bit hash functions
MD4, MD5 and it's predecessor RIPEMD
(not to be confused with RIPEMD-128).
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
It's speed is comparable to SHA1 and there are no known attacks
against RIPEMD-160.
[CRYPTO] ripemd: Add Kconfig entries for extended RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-09 07:30:27 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
[CRYPTO] ripemd: Add Kconfig entries for extended RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-09 07:30:27 -06:00
config CRYPTO_RMD256
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
tristate "RIPEMD-256 digest algorithm"
crypto: rmd256 - Switch to shash This patch changes rmd256 to the new shash interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-07 18:58:10 -07:00
select CRYPTO_HASH
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
help
RIPEMD-256 is an optional extension of RIPEMD-128 with a
256 bit hash. It is intended for applications that require
longer hash-results, without needing a larger security level
(than RIPEMD-128).
[CRYPTO] ripemd: Add Kconfig entries for extended RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-09 07:30:27 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
[CRYPTO] ripemd: Add Kconfig entries for extended RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-09 07:30:27 -06:00
config CRYPTO_RMD320
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
tristate "RIPEMD-320 digest algorithm"
crypto: rmd320 - Switch to shash This patch changes rmd320 to the new shash interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-07 19:11:09 -07:00
select CRYPTO_HASH
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
help
RIPEMD-320 is an optional extension of RIPEMD-160 with a
320 bit hash. It is intended for applications that require
longer hash-results, without needing a larger security level
(than RIPEMD-160).
[CRYPTO] ripemd: Add Kconfig entries for extended RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-09 07:30:27 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
[CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 08:17:37 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_SHA1
tristate "SHA1 digest algorithm"
crypto: sha1 - Switch to shash This patch changes sha1 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-02 06:08:20 -07:00
select CRYPTO_HASH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 12:19:25 -06:00
config CRYPTO_SHA1_SSSE3
crypto: sha - SHA1 transform x86_64 AVX2 This git patch adds x86_64 AVX2 optimization of SHA1 transform to crypto support. The patch has been tested with 3.14.0-rc1 kernel. On a Haswell desktop, with turbo disabled and all cpus running at maximum frequency, tcrypt shows AVX2 performance improvement from 3% for 256 bytes update to 16% for 1024 bytes update over AVX implementation. This patch adds sha1_avx2_transform(), the glue, build and configuration changes needed for AVX2 optimization of SHA1 transform to crypto support. sha1-ssse3 is one module which adds the necessary optimization support (SSSE3/AVX/AVX2) for the low-level SHA1 transform function. With better optimization support, transform function is overridden as the case may be. In the case of AVX2, due to performance reasons across datablock sizes, the AVX or AVX2 transform function is used at run-time as it suits best. The Makefile change therefore appends the necessary objects to the linkage. Due to this, the patch merely appends AVX2 transform to the existing build mix and Kconfig support and leaves the configuration build support as is. Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-20 16:14:00 -06:00
tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)"
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 12:19:25 -06:00
depends on X86 && 64BIT
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
crypto: sha - SHA1 transform x86_64 AVX2 This git patch adds x86_64 AVX2 optimization of SHA1 transform to crypto support. The patch has been tested with 3.14.0-rc1 kernel. On a Haswell desktop, with turbo disabled and all cpus running at maximum frequency, tcrypt shows AVX2 performance improvement from 3% for 256 bytes update to 16% for 1024 bytes update over AVX implementation. This patch adds sha1_avx2_transform(), the glue, build and configuration changes needed for AVX2 optimization of SHA1 transform to crypto support. sha1-ssse3 is one module which adds the necessary optimization support (SSSE3/AVX/AVX2) for the low-level SHA1 transform function. With better optimization support, transform function is overridden as the case may be. In the case of AVX2, due to performance reasons across datablock sizes, the AVX or AVX2 transform function is used at run-time as it suits best. The Makefile change therefore appends the necessary objects to the linkage. Due to this, the patch merely appends AVX2 transform to the existing build mix and Kconfig support and leaves the configuration build support as is. Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-20 16:14:00 -06:00
Extensions (AVX/AVX2), when available.
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 12:19:25 -06:00
crypto: sha256 - Create module providing optimized SHA256 routines using SSSE3, AVX or AVX2 instructions. We added glue code and config options to create crypto module that uses SSE/AVX/AVX2 optimized SHA256 x86_64 assembly routines. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-26 14:59:17 -06:00
config CRYPTO_SHA256_SSSE3
tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
Extensions version 1 (AVX1), or Advanced Vector Extensions
crypto: sha512 - Create module providing optimized SHA512 routines using SSSE3, AVX or AVX2 instructions. We added glue code and config options to create crypto module that uses SSE/AVX/AVX2 optimized SHA512 x86_64 assembly routines. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-26 15:00:02 -06:00
version 2 (AVX2) instructions, when available.
config CRYPTO_SHA512_SSSE3
tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
Extensions version 1 (AVX1), or Advanced Vector Extensions
crypto: sha256 - Create module providing optimized SHA256 routines using SSSE3, AVX or AVX2 instructions. We added glue code and config options to create crypto module that uses SSE/AVX/AVX2 optimized SHA256 x86_64 assembly routines. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-26 14:59:17 -06:00
version 2 (AVX2) instructions, when available.
crypto: octeon - enable OCTEON SHA1/256/512 module selection Enable user to select OCTEON SHA1/256/512 modules. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-08 14:07:47 -06:00
config CRYPTO_SHA1_OCTEON
tristate "SHA1 digest algorithm (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using OCTEON crypto instructions, when available.
sparc64: Add SHA1 driver making use of the 'sha1' instruction. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-19 16:41:53 -06:00
config CRYPTO_SHA1_SPARC64
tristate "SHA1 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
powerpc: Add a powerpc implementation of SHA-1 This patch adds a crypto driver which provides a powerpc accelerated implementation of SHA-1, accelerated in that it is written in asm. Original patch by Paul, minor fixups for upstream by moi. Lightly tested on 64-bit with the test program here: http://michael.ellerman.id.au/files/junkcode/sha1test.c Seems to work, and is "not slower" than the generic version. Needs testing on 32-bit. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-13 17:00:49 -06:00
config CRYPTO_SHA1_PPC
tristate "SHA1 digest algorithm (powerpc)"
depends on PPC
help
This is the powerpc hardware accelerated implementation of the
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
crypto: powerpc/sha1 - kernel config Integrate the module into the kernel config tree. Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-02-24 12:36:50 -07:00
config CRYPTO_SHA1_PPC_SPE
tristate "SHA1 digest algorithm (PPC SPE)"
depends on PPC && SPE
help
SHA-1 secure hash standard (DFIPS 180-4) implemented
using powerpc SPE SIMD instruction set.
crypto: sha-mb - multibuffer crypto infrastructure This patch introduces the multi-buffer crypto daemon which is responsible for submitting crypto jobs in a work queue to the responsible multi-buffer crypto algorithm. The idea of the multi-buffer algorihtm is to put data streams from multiple jobs in a wide (AVX2) register and then take advantage of SIMD instructions to do crypto computation on several buffers simultaneously. The multi-buffer crypto daemon is also responsbile for flushing the remaining buffers to complete the computation if no new buffers arrive for a while. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-31 11:29:51 -06:00
config CRYPTO_SHA1_MB
tristate "SHA1 digest algorithm (x86_64 Multi-Buffer, Experimental)"
depends on X86 && 64BIT
select CRYPTO_SHA1
select CRYPTO_HASH
select CRYPTO_MCRYPTD
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using multi-buffer technique. This algorithm computes on
multiple data lanes concurrently with SIMD instructions for
better throughput. It should not be enabled by default but
used when there is significant amount of work to keep the keep
the data lanes filled to get performance benefit. If the data
lanes remain unfilled, a flush operation will be initiated to
process the crypto jobs, adding a slight latency.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_SHA256
tristate "SHA224 and SHA256 digest algorithm"
crypto: sha256 - Switch to shash This patch changes sha256 and sha224 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-03 04:57:49 -07:00
select CRYPTO_HASH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
SHA256 secure hash standard (DFIPS 180-2).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
This version of SHA implements a 256 bit hash with 128 bits of
security against collision attacks.
[CRYPTO] twofish: Split out common c code This patch splits up the twofish crypto routine into a common part ( key setup ) which will be uses by all twofish crypto modules ( generic-c , i586 assembler and x86_64 assembler ) and generic-c part. It also creates a new header file which will be used by all 3 modules. This eliminates all code duplication. Correctness was verified with the tcrypt module and automated test scripts. Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 04:37:23 -06:00
crypto: Kconfig - Replace leading spaces with tabs Instead of tabs there were two spaces. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-16 05:28:00 -06:00
This code also includes SHA-224, a 224 bit hash with 112 bits
of security against collision attacks.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
crypto: ppc/sha256 - kernel config Integrate the module into the kernel config tree. Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-30 07:39:34 -07:00
config CRYPTO_SHA256_PPC_SPE
tristate "SHA224 and SHA256 digest algorithm (PPC SPE)"
depends on PPC && SPE
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA224 and SHA256 secure hash standard (DFIPS 180-2)
implemented using powerpc SPE SIMD instruction set.
crypto: octeon - enable OCTEON SHA1/256/512 module selection Enable user to select OCTEON SHA1/256/512 modules. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-08 14:07:47 -06:00
config CRYPTO_SHA256_OCTEON
tristate "SHA224 and SHA256 digest algorithm (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using OCTEON crypto instructions, when available.
sparc64: Add SHA224/SHA256 driver making use of the 'sha256' instruction. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-19 18:11:37 -06:00
config CRYPTO_SHA256_SPARC64
tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_SHA512
tristate "SHA384 and SHA512 digest algorithms"
crypto: sha512 - Switch to shash This patch changes sha512 and sha384 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-16 22:49:02 -07:00
select CRYPTO_HASH
[CRYPTO] twofish: i586 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -33% Cycles decrypt: -45% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +3% Cycles decrypt: -22% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -20% Cycles decrypt: -36% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-i586.txt Here is another bonnie++ benchmark with encrypted filesystems. All runs with the twofish assembler modules max out the drivespeed. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060611_205432_x86.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 04:59:16 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
SHA512 secure hash standard (DFIPS 180-2).
[CRYPTO] twofish: i586 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -33% Cycles decrypt: -45% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +3% Cycles decrypt: -22% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -20% Cycles decrypt: -36% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-i586.txt Here is another bonnie++ benchmark with encrypted filesystems. All runs with the twofish assembler modules max out the drivespeed. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060611_205432_x86.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 04:59:16 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
This version of SHA implements a 512 bit hash with 256 bits of
security against collision attacks.
[CRYPTO] twofish: i586 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -33% Cycles decrypt: -45% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +3% Cycles decrypt: -22% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -20% Cycles decrypt: -36% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-i586.txt Here is another bonnie++ benchmark with encrypted filesystems. All runs with the twofish assembler modules max out the drivespeed. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060611_205432_x86.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 04:59:16 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
This code also includes SHA-384, a 384 bit hash with 192 bits
of security against collision attacks.
[CRYPTO] twofish: i586 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -33% Cycles decrypt: -45% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +3% Cycles decrypt: -22% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -20% Cycles decrypt: -36% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-i586.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-i586.txt Here is another bonnie++ benchmark with encrypted filesystems. All runs with the twofish assembler modules max out the drivespeed. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060611_205432_x86.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 04:59:16 -06:00
crypto: octeon - enable OCTEON SHA1/256/512 module selection Enable user to select OCTEON SHA1/256/512 modules. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-08 14:07:47 -06:00
config CRYPTO_SHA512_OCTEON
tristate "SHA384 and SHA512 digest algorithms (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using OCTEON crypto instructions, when available.
sparc64: Add SHA384/SHA512 driver making use of the 'sha512' instruction. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-19 18:37:56 -06:00
config CRYPTO_SHA512_SPARC64
tristate "SHA384 and SHA512 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_TGR192
tristate "Tiger digest algorithms"
crypto: tgr192 - Switch to shash This patch changes tgr192, tgr160 and tgr128 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-03 04:58:32 -07:00
select CRYPTO_HASH
[CRYPTO] twofish: x86-64 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -27% Cycles decrypt: -23% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +18% Cycles decrypt: +15% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -9% Cycles decrypt: -8% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-x86_64.txt Here is another bonnie++ benchmark with encrypted filesystems. Most runs maxed out the hd. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060610_130806_x86_64.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 05:12:02 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Tiger hash algorithm 192, 160 and 128-bit hashes
[CRYPTO] twofish: x86-64 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -27% Cycles decrypt: -23% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +18% Cycles decrypt: +15% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -9% Cycles decrypt: -8% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-x86_64.txt Here is another bonnie++ benchmark with encrypted filesystems. Most runs maxed out the hd. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060610_130806_x86_64.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 05:12:02 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Tiger is a hash function optimized for 64-bit processors while
still having decent performance on 32-bit processors.
Tiger was developed by Ross Anderson and Eli Biham.
[CRYPTO] twofish: x86-64 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -27% Cycles decrypt: -23% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +18% Cycles decrypt: +15% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -9% Cycles decrypt: -8% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-x86_64.txt Here is another bonnie++ benchmark with encrypted filesystems. Most runs maxed out the hd. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060610_130806_x86_64.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 05:12:02 -06:00
See also:
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
<http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
[CRYPTO] twofish: x86-64 assembly version The patch passed the trycpt tests and automated filesystem tests. This rewrite resulted in some nice perfomance increase over my last patch. Short summary of the tcrypt benchmarks: Twofish Assembler vs. Twofish C (256bit 8kb block CBC) encrypt: -27% Cycles decrypt: -23% Cycles Twofish Assembler vs. AES Assembler (128bit 8kb block CBC) encrypt: +18% Cycles decrypt: +15% Cycles Twofish Assembler vs. AES Assembler (256bit 8kb block CBC) encrypt: -9% Cycles decrypt: -8% Cycles Full Output: http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-x86_64.txt http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-x86_64.txt Here is another bonnie++ benchmark with encrypted filesystems. Most runs maxed out the hd. It should give some idea what the module can do for encrypted filesystem performance even though you can't see the full numbers. http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060610_130806_x86_64.html Signed-off-by: Joachim Fritschi <jfritschi@freenet.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-06-20 05:12:02 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_WP512
tristate "Whirlpool digest algorithms"
crypto: wp512 - Switch to shash This patch changes wp512, wp384 and wp256 to the new shash interface. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-07 04:34:37 -07:00
select CRYPTO_HASH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Whirlpool hash algorithm 512, 384 and 256-bit hashes
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Whirlpool-512 is part of the NESSIE cryptographic primitives.
Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
See also:
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
<http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
crypto: ghash - Add PCLMULQDQ accelerated implementation PCLMULQDQ is used to accelerate the most time-consuming part of GHASH, carry-less multiplication. More information about PCLMULQDQ can be found at: http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/ Because PCLMULQDQ changes XMM state, its usage must be enclosed with kernel_fpu_begin/end, which can be used only in process context, the acceleration is implemented as crypto_ahash. That is, request in soft IRQ context will be defered to the cryptd kernel thread. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-10-18 20:53:06 -06:00
config CRYPTO_GHASH_CLMUL_NI_INTEL
tristate "GHASH digest algorithm (CLMUL-NI accelerated)"
crypto: UML build fixes CRYPTO_GHASH_CLMUL_NI_INTEL and CRYPTO_AES_NI_INTEL cannot be used on UML. Commit 3e02e5cb and 54b6a1b enabled them by accident. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-08 06:56:29 -06:00
depends on X86 && 64BIT
crypto: ghash - Add PCLMULQDQ accelerated implementation PCLMULQDQ is used to accelerate the most time-consuming part of GHASH, carry-less multiplication. More information about PCLMULQDQ can be found at: http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/ Because PCLMULQDQ changes XMM state, its usage must be enclosed with kernel_fpu_begin/end, which can be used only in process context, the acceleration is implemented as crypto_ahash. That is, request in soft IRQ context will be defered to the cryptd kernel thread. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-10-18 20:53:06 -06:00
select CRYPTO_CRYPTD
help
GHASH is message digest algorithm for GCM (Galois/Counter Mode).
The implementation is accelerated by CLMUL-NI of Intel.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Ciphers"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
config CRYPTO_AES
tristate "AES cipher algorithms"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
AES cipher algorithms (FIPS-197). AES uses the Rijndael
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
algorithm.
Rijndael appears to be consistently a very good performer in
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
The AES specifies three key sizes: 128, 192 and 256 bits
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_ALGAPI
[CRYPTO] aes-i586: Remove setkey The setkey() function can be shared with the generic algorithm. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-10 04:07:16 -07:00
select CRYPTO_AES
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
AES cipher algorithms (FIPS-197). AES uses the Rijndael
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
algorithm.
Rijndael appears to be consistently a very good performer in
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
The AES specifies three key sizes: 128, 192 and 256 bits
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 14:55:00 -06:00
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_X86_64
tristate "AES cipher algorithms (x86_64)"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_ALGAPI
[CRYPTO] aes-x86-64: Remove setkey The setkey() function can be shared with the generic algorithm. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-08 06:25:04 -07:00
select CRYPTO_AES
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 14:55:00 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
AES cipher algorithms (FIPS-197). AES uses the Rijndael
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 14:55:00 -06:00
algorithm.
Rijndael appears to be consistently a very good performer in
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64 platform Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD) instructions that are going to be introduced in the next generation of Intel processor, as of 2009. These instructions enable fast and secure data encryption and decryption, using the Advanced Encryption Standard (AES), defined by FIPS Publication number 197. The architecture introduces six instructions that offer full hardware support for AES. Four of them support high performance data encryption and decryption, and the other two instructions support the AES key expansion procedure. The white paper can be downloaded from: http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf AES may be used in soft_irq context, but MMX/SSE context can not be touched safely in soft_irq context. So in_interrupt() is checked, if in IRQ or soft_irq context, the general x86_64 implementation are used instead. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-01-17 22:28:34 -07:00
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_NI_INTEL
tristate "AES cipher algorithms (AES-NI)"
crypto: UML build fixes CRYPTO_GHASH_CLMUL_NI_INTEL and CRYPTO_AES_NI_INTEL cannot be used on UML. Commit 3e02e5cb and 54b6a1b enabled them by accident. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-08 06:56:29 -06:00
depends on X86
crypto: aesni-intel - Ported implementation to x86-32 The AES-NI instructions are also available in legacy mode so the 32-bit architecture may profit from those, too. To illustrate the performance gain here's a short summary of a dm-crypt speed test on a Core i7 M620 running at 2.67GHz comparing both assembler implementations: x86: i568 aes-ni delta ECB, 256 bit: 93.8 MB/s 123.3 MB/s +31.4% CBC, 256 bit: 84.8 MB/s 262.3 MB/s +209.3% LRW, 256 bit: 108.6 MB/s 222.1 MB/s +104.5% XTS, 256 bit: 105.0 MB/s 205.5 MB/s +95.7% Additionally, due to some minor optimizations, the 64-bit version also got a minor performance gain as seen below: x86-64: old impl. new impl. delta ECB, 256 bit: 121.1 MB/s 123.0 MB/s +1.5% CBC, 256 bit: 285.3 MB/s 290.8 MB/s +1.9% LRW, 256 bit: 263.7 MB/s 265.3 MB/s +0.6% XTS, 256 bit: 251.1 MB/s 255.3 MB/s +1.7% Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-27 01:34:46 -07:00
select CRYPTO_AES_X86_64 if 64BIT
select CRYPTO_AES_586 if !64BIT
crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64 platform Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD) instructions that are going to be introduced in the next generation of Intel processor, as of 2009. These instructions enable fast and secure data encryption and decryption, using the Advanced Encryption Standard (AES), defined by FIPS Publication number 197. The architecture introduces six instructions that offer full hardware support for AES. Four of them support high performance data encryption and decryption, and the other two instructions support the AES key expansion procedure. The white paper can be downloaded from: http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf AES may be used in soft_irq context, but MMX/SSE context can not be touched safely in soft_irq context. So in_interrupt() is checked, if in IRQ or soft_irq context, the general x86_64 implementation are used instead. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-01-17 22:28:34 -07:00
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64 platform Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD) instructions that are going to be introduced in the next generation of Intel processor, as of 2009. These instructions enable fast and secure data encryption and decryption, using the Advanced Encryption Standard (AES), defined by FIPS Publication number 197. The architecture introduces six instructions that offer full hardware support for AES. Four of them support high performance data encryption and decryption, and the other two instructions support the AES key expansion procedure. The white paper can be downloaded from: http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf AES may be used in soft_irq context, but MMX/SSE context can not be touched safely in soft_irq context. So in_interrupt() is checked, if in IRQ or soft_irq context, the general x86_64 implementation are used instead. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-01-17 22:28:34 -07:00
select CRYPTO_ALGAPI
crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86 The Kconfig setting for glue helper module is CRYPTO_GLUE_HELPER_X86, but recent change for aesni_intel used CRYPTO_GLUE_HELPER instead. Patch corrects this issue. Cc: kbuild-all@01.org Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-10 09:39:20 -06:00
select CRYPTO_GLUE_HELPER_X86 if 64BIT
crypto: aesni_intel - improve lrw and xts performance by utilizing parallel AES-NI hardware pipelines Use parallel LRW and XTS encryption facilities to better utilize AES-NI hardware pipelines and gain extra performance. Tcrypt benchmark results (async), old vs new ratios: Intel Core i5-2450M CPU (fam: 6, model: 42, step: 7) aes:128bit lrw:256bit xts:256bit size lrw-enc lrw-dec xts-dec xts-dec 16B 0.99x 1.00x 1.22x 1.19x 64B 1.38x 1.50x 1.58x 1.61x 256B 2.04x 2.02x 2.27x 2.29x 1024B 2.56x 2.54x 2.89x 2.92x 8192B 2.85x 2.99x 3.40x 3.23x aes:192bit lrw:320bit xts:384bit size lrw-enc lrw-dec xts-dec xts-dec 16B 1.08x 1.08x 1.16x 1.17x 64B 1.48x 1.54x 1.59x 1.65x 256B 2.18x 2.17x 2.29x 2.28x 1024B 2.67x 2.67x 2.87x 3.05x 8192B 2.93x 2.84x 3.28x 3.33x aes:256bit lrw:348bit xts:512bit size lrw-enc lrw-dec xts-dec xts-dec 16B 1.07x 1.07x 1.18x 1.19x 64B 1.56x 1.56x 1.70x 1.71x 256B 2.22x 2.24x 2.46x 2.46x 1024B 2.76x 2.77x 3.13x 3.05x 8192B 2.99x 3.05x 3.40x 3.30x Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Reviewed-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-22 09:18:37 -06:00
select CRYPTO_LRW
select CRYPTO_XTS
crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64 platform Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD) instructions that are going to be introduced in the next generation of Intel processor, as of 2009. These instructions enable fast and secure data encryption and decryption, using the Advanced Encryption Standard (AES), defined by FIPS Publication number 197. The architecture introduces six instructions that offer full hardware support for AES. Four of them support high performance data encryption and decryption, and the other two instructions support the AES key expansion procedure. The white paper can be downloaded from: http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf AES may be used in soft_irq context, but MMX/SSE context can not be touched safely in soft_irq context. So in_interrupt() is checked, if in IRQ or soft_irq context, the general x86_64 implementation are used instead. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-01-17 22:28:34 -07:00
help
Use Intel AES-NI instructions for AES algorithm.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 14:55:00 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
The AES specifies three key sizes: 128, 192 and 256 bits
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
See <http://csrc.nist.gov/encryption/aes/> for more information.
crypto: aesni-intel - Ported implementation to x86-32 The AES-NI instructions are also available in legacy mode so the 32-bit architecture may profit from those, too. To illustrate the performance gain here's a short summary of a dm-crypt speed test on a Core i7 M620 running at 2.67GHz comparing both assembler implementations: x86: i568 aes-ni delta ECB, 256 bit: 93.8 MB/s 123.3 MB/s +31.4% CBC, 256 bit: 84.8 MB/s 262.3 MB/s +209.3% LRW, 256 bit: 108.6 MB/s 222.1 MB/s +104.5% XTS, 256 bit: 105.0 MB/s 205.5 MB/s +95.7% Additionally, due to some minor optimizations, the 64-bit version also got a minor performance gain as seen below: x86-64: old impl. new impl. delta ECB, 256 bit: 121.1 MB/s 123.0 MB/s +1.5% CBC, 256 bit: 285.3 MB/s 290.8 MB/s +1.9% LRW, 256 bit: 263.7 MB/s 265.3 MB/s +0.6% XTS, 256 bit: 251.1 MB/s 255.3 MB/s +1.7% Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-27 01:34:46 -07:00
In addition to AES cipher algorithm support, the acceleration
for some popular block cipher mode is supported too, including
ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional
acceleration for CTR.
crypto: aes-ni - Add support for more modes Because kernel_fpu_begin() and kernel_fpu_end() operations are too slow, the performance gain of general mode implementation + aes-aesni is almost all compensated. The AES-NI support for more modes are implemented as follow: - Add a new AES algorithm implementation named __aes-aesni without kernel_fpu_begin/end() - Use fpu(<mode>(AES)) to provide kenrel_fpu_begin/end() invoking - Add <mode>(AES) ablkcipher, which uses cryptd(fpu(<mode>(AES))) to defer cryption to cryptd context in soft_irq context. Now the ctr, lrw, pcbc and xts support are added. Performance testing based on dm-crypt shows that cryption time can be reduced to 50% of general mode implementation + aes-aesni implementation. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-29 01:41:20 -06:00
sparc64: Add AES driver making use of the new aes opcodes. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-21 04:58:13 -06:00
config CRYPTO_AES_SPARC64
tristate "AES cipher algorithms (SPARC64)"
depends on SPARC64
select CRYPTO_CRYPTD
select CRYPTO_ALGAPI
help
Use SPARC64 crypto opcodes for AES algorithm.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
In addition to AES cipher algorithm support, the acceleration
for some popular block cipher mode is supported too, including
ECB and CBC.
crypto: powerpc/aes - kernel config Integrate the module into the kernel configuration Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-02-22 02:00:10 -07:00
config CRYPTO_AES_PPC_SPE
tristate "AES cipher algorithms (PPC SPE)"
depends on PPC && SPE
help
AES cipher algorithms (FIPS-197). Additionally the acceleration
for popular block cipher modes ECB, CBC, CTR and XTS is supported.
This module should only be used for low power (router) devices
without hardware AES acceleration (e.g. caam crypto). It reduces the
size of the AES tables from 16KB to 8KB + 256 bytes and mitigates
timining attacks. Nevertheless it might be not as secure as other
architecture specific assembler implementations that work on 1KB
tables or 256 bytes S-boxes.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_ANUBIS
tristate "Anubis cipher algorithm"
select CRYPTO_ALGAPI
help
Anubis cipher algorithm.
Anubis is a variable key length cipher which can use keys from
128 bits to 320 bits in length. It was evaluated as a entrant
in the NESSIE competition.
See also:
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
<https://www.cosic.esat.kuleuven.be/nessie/reports/>
<http://www.larc.usp.br/~pbarreto/AnubisPage.html>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_ARC4
tristate "ARC4 cipher algorithm"
crypto: arc4 - now arc needs blockcipher support Since commit ce6dd368 ("crypto: arc4 - improve performance by adding ecb(arc4)) we need to pull in a blkcipher. |ERROR: "crypto_blkcipher_type" [crypto/arc4.ko] undefined! |ERROR: "blkcipher_walk_done" [crypto/arc4.ko] undefined! |ERROR: "blkcipher_walk_virt" [crypto/arc4.ko] undefined! Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-26 10:13:46 -06:00
select CRYPTO_BLKCIPHER
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
help
ARC4 cipher algorithm.
ARC4 is a stream cipher using keys ranging from 8 bits to 2048
bits in length. This algorithm is required for driver-based
WEP, but it should not be for other purposes because of the
weakness of the algorithm.
config CRYPTO_BLOWFISH
tristate "Blowfish cipher algorithm"
select CRYPTO_ALGAPI
crypto: blowfish - split generic and common c code Patch splits up the blowfish crypto routine into a common part (key setup) which will be used by blowfish crypto modules (x86_64 assembly and generic-c). Also fixes errors/warnings reported by checkpatch. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-01 16:45:07 -06:00
select CRYPTO_BLOWFISH_COMMON
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
help
Blowfish cipher algorithm, by Bruce Schneier.
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See also:
<http://www.schneier.com/blowfish.html>
crypto: blowfish - split generic and common c code Patch splits up the blowfish crypto routine into a common part (key setup) which will be used by blowfish crypto modules (x86_64 assembly and generic-c). Also fixes errors/warnings reported by checkpatch. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-01 16:45:07 -06:00
config CRYPTO_BLOWFISH_COMMON
tristate
help
Common parts of the Blowfish cipher algorithm shared by the
generic c and the assembler implementations.
See also:
<http://www.schneier.com/blowfish.html>
crypto: blowfish - add x86_64 assembly implementation Patch adds x86_64 assembly implementation of blowfish. Two set of assembler functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'four-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 4-way functions should be equal to 1-way functions with in-order CPUs. Summary of the tcrypt benchmarks: Blowfish assembler vs blowfish C (256bit 8kb block ECB) encrypt: 2.2x speed decrypt: 2.3x speed Blowfish assembler vs blowfish C (256bit 8kb block CBC) encrypt: 1.12x speed decrypt: 2.5x speed Blowfish assembler vs blowfish C (256bit 8kb block CTR) encrypt: 2.5x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-blowfish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-blowfish-c-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor stepping : 0 Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-01 16:45:22 -06:00
config CRYPTO_BLOWFISH_X86_64
tristate "Blowfish cipher algorithm (x86_64)"
um: several x86 hw-dependent crypto modules won't build on uml Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-08 18:31:22 -06:00
depends on X86 && 64BIT
crypto: blowfish - add x86_64 assembly implementation Patch adds x86_64 assembly implementation of blowfish. Two set of assembler functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'four-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 4-way functions should be equal to 1-way functions with in-order CPUs. Summary of the tcrypt benchmarks: Blowfish assembler vs blowfish C (256bit 8kb block ECB) encrypt: 2.2x speed decrypt: 2.3x speed Blowfish assembler vs blowfish C (256bit 8kb block CBC) encrypt: 1.12x speed decrypt: 2.5x speed Blowfish assembler vs blowfish C (256bit 8kb block CTR) encrypt: 2.5x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-blowfish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-blowfish-c-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor stepping : 0 Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-01 16:45:22 -06:00
select CRYPTO_ALGAPI
select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm (x86_64), by Bruce Schneier.
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See also:
<http://www.schneier.com/blowfish.html>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_CAMELLIA
tristate "Camellia cipher algorithms"
depends on CRYPTO
select CRYPTO_ALGAPI
help
Camellia cipher algorithms module.
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 11:26:47 -07:00
config CRYPTO_CAMELLIA_X86_64
tristate "Camellia cipher algorithm (x86_64)"
um: several x86 hw-dependent crypto modules won't build on uml Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-08 18:31:22 -06:00
depends on X86 && 64BIT
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 11:26:47 -07:00
depends on CRYPTO
select CRYPTO_ALGAPI
crypto: camellia-x86_64 - remove duplicated glue code and use shared glue code from glue_helper Now that shared glue code is available, convert camellia-x86_64 to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:29 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 11:26:47 -07:00
select CRYPTO_LRW
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher This patch adds AES-NI/AVX/x86_64 assembler implementation of Camellia block cipher. Implementation process data in sixteen block chunks, which are byte-sliced and AES SubBytes is reused for Camellia s-box with help of pre- and post-filtering. Patch has been tested with tcrypt and automated filesystem tests. tcrypt test results: Intel Core i5-2450M: camellia-aesni-avx vs camellia-asm-x86_64-2way: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.98x 0.96x 0.99x 0.96x 0.96x 0.95x 0.95x 0.94x 0.97x 0.98x 64B 0.99x 0.98x 1.00x 0.98x 0.98x 0.99x 0.98x 0.93x 0.99x 0.98x 256B 2.28x 2.28x 1.01x 2.29x 2.25x 2.24x 1.96x 1.97x 1.91x 1.90x 1024B 2.57x 2.56x 1.00x 2.57x 2.51x 2.53x 2.19x 2.17x 2.19x 2.22x 8192B 2.49x 2.49x 1.00x 2.53x 2.48x 2.49x 2.17x 2.17x 2.22x 2.22x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.98x 0.99x 0.97x 0.97x 0.96x 0.97x 0.98x 0.98x 0.99x 64B 1.00x 1.00x 1.01x 0.99x 0.98x 0.99x 0.99x 0.99x 0.99x 0.99x 256B 2.37x 2.37x 1.01x 2.39x 2.35x 2.33x 2.10x 2.11x 1.99x 2.02x 1024B 2.58x 2.60x 1.00x 2.58x 2.56x 2.56x 2.28x 2.29x 2.28x 2.29x 8192B 2.50x 2.52x 1.00x 2.56x 2.51x 2.51x 2.24x 2.25x 2.26x 2.29x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-26 05:49:01 -06:00
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher This patch adds AES-NI/AVX/x86_64 assembler implementation of Camellia block cipher. Implementation process data in sixteen block chunks, which are byte-sliced and AES SubBytes is reused for Camellia s-box with help of pre- and post-filtering. Patch has been tested with tcrypt and automated filesystem tests. tcrypt test results: Intel Core i5-2450M: camellia-aesni-avx vs camellia-asm-x86_64-2way: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.98x 0.96x 0.99x 0.96x 0.96x 0.95x 0.95x 0.94x 0.97x 0.98x 64B 0.99x 0.98x 1.00x 0.98x 0.98x 0.99x 0.98x 0.93x 0.99x 0.98x 256B 2.28x 2.28x 1.01x 2.29x 2.25x 2.24x 1.96x 1.97x 1.91x 1.90x 1024B 2.57x 2.56x 1.00x 2.57x 2.51x 2.53x 2.19x 2.17x 2.19x 2.22x 8192B 2.49x 2.49x 1.00x 2.53x 2.48x 2.49x 2.17x 2.17x 2.22x 2.22x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.98x 0.99x 0.97x 0.97x 0.96x 0.97x 0.98x 0.98x 0.99x 64B 1.00x 1.00x 1.01x 0.99x 0.98x 0.99x 0.99x 0.99x 0.99x 0.99x 256B 2.37x 2.37x 1.01x 2.39x 2.35x 2.33x 2.10x 2.11x 1.99x 2.02x 1024B 2.58x 2.60x 1.00x 2.58x 2.56x 2.56x 2.28x 2.29x 2.28x 2.29x 8192B 2.50x 2.52x 1.00x 2.56x 2.51x 2.51x 2.24x 2.25x 2.26x 2.29x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-26 05:49:01 -06:00
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_LRW
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64/AES-NI/AVX).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 11:26:47 -07:00
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher Patch adds AVX2/AES-NI/x86-64 implementation of Camellia cipher, requiring 32 parallel blocks for input (512 bytes). Compared to AVX implementation, this version is extended to use the 256-bit wide YMM registers. For AES-NI instructions data is split to two 128-bit registers and merged afterwards. Even with this additional handling, performance should be higher compared to the AES-NI/AVX implementation. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-13 04:47:00 -06:00
config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher Patch adds AVX2/AES-NI/x86-64 implementation of Camellia cipher, requiring 32 parallel blocks for input (512 bytes). Compared to AVX implementation, this version is extended to use the 256-bit wide YMM registers. For AES-NI instructions data is split to two 128-bit registers and merged afterwards. Even with this additional handling, performance should be higher compared to the AES-NI/AVX implementation. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-13 04:47:00 -06:00
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
select CRYPTO_LRW
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
sparc64: Add CAMELLIA driver making use of the new camellia opcodes. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-28 13:05:54 -06:00
config CRYPTO_CAMELLIA_SPARC64
tristate "Camellia cipher algorithm (SPARC64)"
depends on SPARC64
depends on CRYPTO
select CRYPTO_ALGAPI
help
Camellia cipher algorithm module (SPARC64).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
crypto: cast5/cast6 - move lookup tables to shared module CAST5 and CAST6 both use same lookup tables, which can be moved shared module 'cast_common'. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-13 02:43:14 -07:00
config CRYPTO_CAST_COMMON
tristate
help
Common parts of the CAST cipher algorithms shared by the
generic c and the assembler implementations.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
config CRYPTO_CAST5
tristate "CAST5 (CAST-128) cipher algorithm"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
crypto: cast5/cast6 - move lookup tables to shared module CAST5 and CAST6 both use same lookup tables, which can be moved shared module 'cast_common'. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-13 02:43:14 -07:00
select CRYPTO_CAST_COMMON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
crypto: cast5 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast5 block cipher. The implementation processes sixteen blocks in parallel (four 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast5-avx-x86_64 vs. cast5-generic 64bit key: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.99x 0.99x 1.00x 1.00x 1.02x 1.01x 64B 1.00x 1.00x 0.98x 1.00x 1.01x 1.02x 256B 2.03x 2.01x 0.95x 2.11x 2.12x 2.13x 1024B 2.30x 2.24x 0.95x 2.29x 2.35x 2.35x 8192B 2.31x 2.27x 0.95x 2.31x 2.39x 2.39x 128bit key: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.99x 0.99x 1.00x 1.00x 1.01x 1.01x 64B 1.00x 1.00x 0.98x 1.01x 1.02x 1.01x 256B 2.17x 2.13x 0.96x 2.19x 2.19x 2.19x 1024B 2.29x 2.32x 0.95x 2.34x 2.37x 2.38x 8192B 2.35x 2.32x 0.95x 2.35x 2.39x 2.39x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:37:37 -06:00
config CRYPTO_CAST5_AVX_X86_64
tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: cast5/cast6 - move lookup tables to shared module CAST5 and CAST6 both use same lookup tables, which can be moved shared module 'cast_common'. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-13 02:43:14 -07:00
select CRYPTO_CAST_COMMON
crypto: cast5 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast5 block cipher. The implementation processes sixteen blocks in parallel (four 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast5-avx-x86_64 vs. cast5-generic 64bit key: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.99x 0.99x 1.00x 1.00x 1.02x 1.01x 64B 1.00x 1.00x 0.98x 1.00x 1.01x 1.02x 256B 2.03x 2.01x 0.95x 2.11x 2.12x 2.13x 1024B 2.30x 2.24x 0.95x 2.29x 2.35x 2.35x 8192B 2.31x 2.27x 0.95x 2.31x 2.39x 2.39x 128bit key: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.99x 0.99x 1.00x 1.00x 1.01x 1.01x 64B 1.00x 1.00x 0.98x 1.01x 1.02x 1.01x 256B 2.17x 2.13x 0.96x 2.19x 2.19x 2.19x 1024B 2.29x 2.32x 0.95x 2.34x 2.37x 2.38x 8192B 2.35x 2.32x 0.95x 2.35x 2.39x 2.39x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:37:37 -06:00
select CRYPTO_CAST5
help
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
This module provides the Cast5 cipher algorithm that processes
sixteen blocks parallel using the AVX instruction set.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
config CRYPTO_CAST6
tristate "CAST6 (CAST-256) cipher algorithm"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
crypto: cast5/cast6 - move lookup tables to shared module CAST5 and CAST6 both use same lookup tables, which can be moved shared module 'cast_common'. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-13 02:43:14 -07:00
select CRYPTO_CAST_COMMON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
crypto: cast6 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:38:57 -06:00
config CRYPTO_CAST6_AVX_X86_64
tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: cast6 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:38:57 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: cast5/cast6 - move lookup tables to shared module CAST5 and CAST6 both use same lookup tables, which can be moved shared module 'cast_common'. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-13 02:43:14 -07:00
select CRYPTO_CAST_COMMON
crypto: cast6 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 11:38:57 -06:00
select CRYPTO_CAST6
select CRYPTO_LRW
select CRYPTO_XTS
help
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
This module provides the Cast6 cipher algorithm that processes
eight blocks parallel using the AVX instruction set.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_DES
tristate "DES and Triple DES EDE cipher algorithms"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
[CRYPTO]: Fix XTEA implementation The XTEA implementation was incorrect due to a misinterpretation of operator precedence. Because of the wide-spread nature of this error, the erroneous implementation will be kept, albeit under the new name of XETA. Signed-off-by: Aaron Grothe <ajgrothe@yahoo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 18:42:46 -06:00
sparc64: Add DES driver making use of the new des opcodes. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-25 23:37:23 -06:00
config CRYPTO_DES_SPARC64
tristate "DES and Triple DES EDE cipher algorithms (SPARC64)"
crypto: Build SPARC DES algorithms on SPARC only. Asking for this option on x86 seems a bit pointless. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02 15:13:20 -06:00
depends on SPARC64
sparc64: Add DES driver making use of the new des opcodes. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-25 23:37:23 -06:00
select CRYPTO_ALGAPI
select CRYPTO_DES
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3),
optimized using SPARC64 crypto opcodes.
crypto: des_3des - add x86-64 assembly implementation Patch adds x86_64 assembly implementation of Triple DES EDE cipher algorithm. Two assembly implementations are provided. First is regular 'one-block at time' encrypt/decrypt function. Second is 'three-blocks at time' function that gains performance increase on out-of-order CPUs. tcrypt test results: Intel Core i5-4570: des3_ede-asm vs des3_ede-generic: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.21x 1.22x 1.27x 1.36x 1.25x 1.25x 64B 1.98x 1.96x 1.23x 2.04x 2.01x 2.00x 256B 2.34x 2.37x 1.21x 2.40x 2.38x 2.39x 1024B 2.50x 2.47x 1.22x 2.51x 2.52x 2.51x 8192B 2.51x 2.53x 1.21x 2.56x 2.54x 2.55x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-09 11:59:54 -06:00
config CRYPTO_DES3_EDE_X86_64
tristate "Triple DES EDE cipher algorithm (x86-64)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_DES
help
Triple DES EDE (FIPS 46-3) algorithm.
This module provides implementation of the Triple DES EDE cipher
algorithm that is optimized for x86-64 processors. Two versions of
algorithm are provided; regular processing one input block and
one that processes three blocks parallel.
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_FCRYPT
tristate "FCrypt cipher algorithm"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
select CRYPTO_BLKCIPHER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
FCrypt algorithm used by RxRPC.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
config CRYPTO_KHAZAD
tristate "Khazad cipher algorithm"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
Khazad cipher algorithm.
Khazad was a finalist in the initial NESSIE competition. It is
an algorithm optimized for 64-bit processors with good performance
on 32-bit processors. Khazad uses an 128 bit key size.
See also:
crypto: Kconfig - update broken web addresses Below is a patch to update the broken web addresses, in crypto/* that I could locate. Some are just simple typos that needed to be fixed, and some had a change in location altogether.. let me know if any of them need to be changed and such. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-11 20:42:47 -06:00
<http://www.larc.usp.br/~pbarreto/KhazadPage.html>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] salsa20: Salsa20 stream cipher This patch implements the Salsa20 stream cipher using the blkcipher interface. The core cipher code comes from Daniel Bernstein's submission to eSTREAM: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/ The test vectors comes from: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ It has been tested successfully with "modprobe tcrypt mode=34" on an UML instance. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-23 04:45:00 -07:00
config CRYPTO_SALSA20
crypto: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-10-02 12:16:49 -06:00
tristate "Salsa20 stream cipher algorithm"
[CRYPTO] salsa20: Salsa20 stream cipher This patch implements the Salsa20 stream cipher using the blkcipher interface. The core cipher code comes from Daniel Bernstein's submission to eSTREAM: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/ The test vectors comes from: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ It has been tested successfully with "modprobe tcrypt mode=34" on an UML instance. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-23 04:45:00 -07:00
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
[CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) This patch contains the salsa20-i586 implementation. The original assembly code came from <http://cr.yp.to/snuffle/salsa20/x86-pm/salsa20.s>. I have reformatted it (added indents) so that it matches the other algorithms in arch/x86/crypto. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 00:52:56 -07:00
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SALSA20_586
crypto: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-10-02 12:16:49 -06:00
tristate "Salsa20 stream cipher algorithm (i586)"
[CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) This patch contains the salsa20-i586 implementation. The original assembly code came from <http://cr.yp.to/snuffle/salsa20/x86-pm/salsa20.s>. I have reformatted it (added indents) so that it matches the other algorithms in arch/x86/crypto. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 00:52:56 -07:00
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
[CRYPTO] salsa20: Add x86-64 assembly version This is the x86-64 version of the Salsa20 stream cipher algorithm. The original assembly code came from <http://cr.yp.to/snuffle/salsa20/amd64-3/salsa20.s>. It has been reformatted for clarity. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 09:04:40 -07:00
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SALSA20_X86_64
crypto: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-10-02 12:16:49 -06:00
tristate "Salsa20 stream cipher algorithm (x86_64)"
[CRYPTO] salsa20: Add x86-64 assembly version This is the x86-64 version of the Salsa20 stream cipher algorithm. The original assembly code came from <http://cr.yp.to/snuffle/salsa20/amd64-3/salsa20.s>. It has been reformatted for clarity. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 09:04:40 -07:00
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
[CRYPTO] salsa20: Salsa20 stream cipher This patch implements the Salsa20 stream cipher using the blkcipher interface. The core cipher code comes from Daniel Bernstein's submission to eSTREAM: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/ The test vectors comes from: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ It has been tested successfully with "modprobe tcrypt mode=34" on an UML instance. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-23 04:45:00 -07:00
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
crypto: chacha20 - Add a generic ChaCha20 stream cipher implementation ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF protocols as a building block for the ChaCha20-Poly1305 AEAD. This is a portable C implementation without any architecture specific optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce prepended by the initial block counter. Some algorithms require an explicit counter value, for example the mentioned AEAD construction. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-01 05:43:56 -06:00
config CRYPTO_CHACHA20
tristate "ChaCha20 cipher algorithm"
select CRYPTO_BLKCIPHER
help
ChaCha20 cipher algorithm, RFC7539.
ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J.
Bernstein and further specified in RFC7539 for use in IETF protocols.
This is the portable C implementation of ChaCha20.
See also:
<http://cr.yp.to/chacha/chacha-20080128.pdf>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_SEED
tristate "SEED cipher algorithm"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
SEED cipher algorithm (RFC4269).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
SEED is a 128-bit symmetric key block cipher that has been
developed by KISA (Korea Information Security Agency) as a
national standard encryption algorithm of the Republic of Korea.
It is a 16 round block cipher with the key size of 128 bit.
See also:
<http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp>
config CRYPTO_SERPENT
tristate "Serpent cipher algorithm"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
variant of Serpent for compatibility with old kerneli.org code.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:25 -07:00
config CRYPTO_SERPENT_SSE2_X86_64
tristate "Serpent cipher algorithm (x86_64/SSE2)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
crypto: serpent-sse2 - should select CRYPTO_CRYPTD Since serpent_sse2_glue.c uses cryptd, CRYPTO_SERPENT_SSE2_X86_64 and CRYPTO_SERPENT_SSE2_586 should be selecting CRYPTO_CRYPTD. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-23 23:37:41 -07:00
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: serpent-sse2 - split generic glue code to new helper module Now that serpent-sse2 glue code has been made generic, it can be split to separate module. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:19 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:25 -07:00
select CRYPTO_SERPENT
crypto: serpent-sse2 - select LRW and XTS serpent-sse2 uses functions from LRW and XTS modules, so selecting would appear to be better option than using #ifdefs in serpent_sse2_glue.c to enable/disable LRW and XTS features. This also fixes build problem when serpent-sse2 would be build into kernel but XTS/LRW are build as modules. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-13 03:53:12 -07:00
select CRYPTO_LRW
select CRYPTO_XTS
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:25 -07:00
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
crypto: serpent_sse2 - Fix a typo in Kconfig This patch fix a spelling typo in crypto/Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-03 09:20:30 -06:00
This module provides Serpent cipher algorithm that processes eight
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:25 -07:00
blocks parallel using SSE2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
crypto: serpent - add 4-way parallel i586/SSE2 assembler implementation Patch adds i586/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in four block chunks. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): Intel Atom N270: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16 0.95x 1.12x 1.02x 1.07x 0.97x 0.98x 64 1.73x 1.82x 1.08x 1.82x 1.72x 1.73x 256 2.08x 2.00x 1.04x 2.07x 1.99x 2.01x 1024 2.28x 2.18x 1.05x 2.23x 2.17x 2.20x 8192 2.28x 2.13x 1.05x 2.23x 2.18x 2.20x Full output: http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-sse2.txt Userspace test results: Encryption/decryption of sse2-i586 vs generic on Intel Atom N270: encrypt: 2.35x decrypt: 2.54x Encryption/decryption of sse2-i586 vs generic on AMD Phenom II: encrypt: 1.82x decrypt: 2.51x Encryption/decryption of sse2-i586 vs generic on Intel Xeon E7330: encrypt: 2.99x decrypt: 3.48x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:31 -07:00
config CRYPTO_SERPENT_SSE2_586
tristate "Serpent cipher algorithm (i586/SSE2)"
depends on X86 && !64BIT
select CRYPTO_ALGAPI
crypto: serpent-sse2 - should select CRYPTO_CRYPTD Since serpent_sse2_glue.c uses cryptd, CRYPTO_SERPENT_SSE2_X86_64 and CRYPTO_SERPENT_SSE2_586 should be selecting CRYPTO_CRYPTD. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-23 23:37:41 -07:00
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: serpent-sse2 - split generic glue code to new helper module Now that serpent-sse2 glue code has been made generic, it can be split to separate module. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:19 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: serpent - add 4-way parallel i586/SSE2 assembler implementation Patch adds i586/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in four block chunks. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): Intel Atom N270: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16 0.95x 1.12x 1.02x 1.07x 0.97x 0.98x 64 1.73x 1.82x 1.08x 1.82x 1.72x 1.73x 256 2.08x 2.00x 1.04x 2.07x 1.99x 2.01x 1024 2.28x 2.18x 1.05x 2.23x 2.17x 2.20x 8192 2.28x 2.13x 1.05x 2.23x 2.18x 2.20x Full output: http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-sse2.txt Userspace test results: Encryption/decryption of sse2-i586 vs generic on Intel Atom N270: encrypt: 2.35x decrypt: 2.54x Encryption/decryption of sse2-i586 vs generic on AMD Phenom II: encrypt: 1.82x decrypt: 2.51x Encryption/decryption of sse2-i586 vs generic on Intel Xeon E7330: encrypt: 2.99x decrypt: 3.48x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:31 -07:00
select CRYPTO_SERPENT
crypto: serpent-sse2 - select LRW and XTS serpent-sse2 uses functions from LRW and XTS modules, so selecting would appear to be better option than using #ifdefs in serpent_sse2_glue.c to enable/disable LRW and XTS features. This also fixes build problem when serpent-sse2 would be build into kernel but XTS/LRW are build as modules. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-13 03:53:12 -07:00
select CRYPTO_LRW
select CRYPTO_XTS
crypto: serpent - add 4-way parallel i586/SSE2 assembler implementation Patch adds i586/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in four block chunks. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): Intel Atom N270: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16 0.95x 1.12x 1.02x 1.07x 0.97x 0.98x 64 1.73x 1.82x 1.08x 1.82x 1.72x 1.73x 256 2.08x 2.00x 1.04x 2.07x 1.99x 2.01x 1024 2.28x 2.18x 1.05x 2.23x 2.17x 2.20x 8192 2.28x 2.13x 1.05x 2.23x 2.18x 2.20x Full output: http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-sse2.txt Userspace test results: Encryption/decryption of sse2-i586 vs generic on Intel Atom N270: encrypt: 2.35x decrypt: 2.54x Encryption/decryption of sse2-i586 vs generic on AMD Phenom II: encrypt: 1.82x decrypt: 2.51x Encryption/decryption of sse2-i586 vs generic on Intel Xeon E7330: encrypt: 2.99x decrypt: 3.48x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:31 -07:00
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes four
blocks parallel using SSE2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
crypto: serpent - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Serpent block cipher. The implementation is very similar to the sse2 implementation and processes eight blocks in parallel. Because of the new non-destructive three operand syntax all move-instructions can be removed and therefore a little performance increase is provided. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) serpent-avx-x86_64 vs. serpent-sse2-x86_64 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.03x 1.01x 1.01x 1.01x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 0.99x 1.00x 1.01x 1.00x 1.00x 256B 1.05x 1.03x 1.00x 1.02x 1.05x 1.06x 1.05x 1.02x 1.05x 1.02x 1024B 1.05x 1.02x 1.00x 1.02x 1.05x 1.06x 1.05x 1.03x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.03x 1.04x 1.02x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.01x 1.00x 1.01x 1.01x 1.00x 1.00x 0.99x 1.03x 1.01x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 1.00x 1.02x 256B 1.05x 1.02x 1.00x 1.02x 1.05x 1.02x 1.04x 1.05x 1.05x 1.02x 1024B 1.06x 1.02x 1.00x 1.02x 1.07x 1.06x 1.05x 1.04x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.05x 1.05x 1.02x serpent-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.26x 1.73x ecb-dec 1.20x 1.64x cbc-enc 0.33x 0.45x cbc-dec 1.24x 1.67x ctr-enc 1.32x 1.76x ctr-dec 1.32x 1.76x lrw-enc 1.20x 1.60x lrw-dec 1.15x 1.54x xts-enc 1.22x 1.64x xts-dec 1.17x 1.57x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-12 02:47:43 -06:00
config CRYPTO_SERPENT_AVX_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: serpent-avx: remove duplicated glue code and use shared glue code from glue_helper Now that shared glue code is available, convert serpent-avx to use it. Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:24 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: serpent - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Serpent block cipher. The implementation is very similar to the sse2 implementation and processes eight blocks in parallel. Because of the new non-destructive three operand syntax all move-instructions can be removed and therefore a little performance increase is provided. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) serpent-avx-x86_64 vs. serpent-sse2-x86_64 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.03x 1.01x 1.01x 1.01x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 0.99x 1.00x 1.01x 1.00x 1.00x 256B 1.05x 1.03x 1.00x 1.02x 1.05x 1.06x 1.05x 1.02x 1.05x 1.02x 1024B 1.05x 1.02x 1.00x 1.02x 1.05x 1.06x 1.05x 1.03x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.03x 1.04x 1.02x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.01x 1.00x 1.01x 1.01x 1.00x 1.00x 0.99x 1.03x 1.01x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 1.00x 1.02x 256B 1.05x 1.02x 1.00x 1.02x 1.05x 1.02x 1.04x 1.05x 1.05x 1.02x 1024B 1.06x 1.02x 1.00x 1.02x 1.07x 1.06x 1.05x 1.04x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.05x 1.05x 1.02x serpent-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.26x 1.73x ecb-dec 1.20x 1.64x cbc-enc 0.33x 0.45x cbc-dec 1.24x 1.67x ctr-enc 1.32x 1.76x ctr-dec 1.32x 1.76x lrw-enc 1.20x 1.60x lrw-dec 1.15x 1.54x xts-enc 1.22x 1.64x xts-dec 1.17x 1.57x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-12 02:47:43 -06:00
select CRYPTO_SERPENT
select CRYPTO_LRW
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides the Serpent cipher algorithm that processes
eight blocks parallel using the AVX instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
crypto: serpent - add 4-way parallel i586/SSE2 assembler implementation Patch adds i586/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in four block chunks. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): Intel Atom N270: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16 0.95x 1.12x 1.02x 1.07x 0.97x 0.98x 64 1.73x 1.82x 1.08x 1.82x 1.72x 1.73x 256 2.08x 2.00x 1.04x 2.07x 1.99x 2.01x 1024 2.28x 2.18x 1.05x 2.23x 2.17x 2.20x 8192 2.28x 2.13x 1.05x 2.23x 2.18x 2.20x Full output: http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/atom-n270/serpent-sse2.txt Userspace test results: Encryption/decryption of sse2-i586 vs generic on Intel Atom N270: encrypt: 2.35x decrypt: 2.54x Encryption/decryption of sse2-i586 vs generic on AMD Phenom II: encrypt: 1.82x decrypt: 2.51x Encryption/decryption of sse2-i586 vs generic on Intel Xeon E7330: encrypt: 2.99x decrypt: 3.48x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 07:26:31 -07:00
crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher Patch adds AVX2/x86-64 implementation of Serpent cipher, requiring 16 parallel blocks for input (256 bytes). Implementation is based on the AVX implementation and extends to use the 256-bit wide YMM registers. Since serpent does not use table look-ups, this implementation should be close to two times faster than the AVX implementation. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-13 04:46:55 -06:00
config CRYPTO_SERPENT_AVX2_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX2)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher Patch adds AVX2/x86-64 implementation of Serpent cipher, requiring 16 parallel blocks for input (256 bytes). Implementation is based on the AVX implementation and extends to use the 256-bit wide YMM registers. Since serpent does not use table look-ups, this implementation should be close to two times faster than the AVX implementation. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-13 04:46:55 -06:00
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_SERPENT_AVX_X86_64
select CRYPTO_LRW
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes 16
blocks parallel using AVX2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_TEA
tristate "TEA, XTEA and XETA cipher algorithms"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
TEA cipher algorithm.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Tiny Encryption Algorithm is a simple cipher that uses
many rounds for security. It is very fast and uses
little memory.
Xtendend Tiny Encryption Algorithm is a modification to
the TEA algorithm to address a potential key weakness
in the TEA algorithm.
Xtendend Encryption Tiny Algorithm is a mis-implementation
of the XTEA algorithm for compatibility purposes.
config CRYPTO_TWOFISH
tristate "Twofish cipher algorithm"
[CRYPTO] camellia: Add Kconfig entry. This patch adds the Kconfig entry for Camellia. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-21 22:49:17 -06:00
select CRYPTO_ALGAPI
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
select CRYPTO_TWOFISH_COMMON
[CRYPTO] camellia: Add Kconfig entry. This patch adds the Kconfig entry for Camellia. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-21 22:49:17 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Twofish cipher algorithm.
[CRYPTO] camellia: Add Kconfig entry. This patch adds the Kconfig entry for Camellia. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-21 22:49:17 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
[CRYPTO] camellia: Add Kconfig entry. This patch adds the Kconfig entry for Camellia. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-21 22:49:17 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_COMMON
tristate
help
Common parts of the Twofish cipher algorithm shared by the
generic c and the assembler implementations.
config CRYPTO_TWOFISH_586
tristate "Twofish cipher algorithms (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm.
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
[CRYPTO] camellia: Add Kconfig entry. This patch adds the Kconfig entry for Camellia. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-21 22:49:17 -06:00
See also:
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
<http://www.schneier.com/twofish.html>
[CRYPTO] camellia: Add Kconfig entry. This patch adds the Kconfig entry for Camellia. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-21 22:49:17 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
config CRYPTO_TWOFISH_X86_64
tristate "Twofish cipher algorithm (x86_64)"
depends on (X86 || UML_X86) && 64BIT
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
select CRYPTO_ALGAPI
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
select CRYPTO_TWOFISH_COMMON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Twofish cipher algorithm (x86_64).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
crypto: twofish - add 3-way parallel x86_64 assembler implemention Patch adds 3-way parallel x86_64 assembly implementation of twofish as new module. New assembler functions crypt data in three blocks chunks, improving cipher performance on out-of-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Summary of the tcrypt benchmarks: Twofish 3-way-asm vs twofish asm (128bit 8kb block ECB) encrypt: 1.3x speed decrypt: 1.3x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CBC) encrypt: 1.07x speed decrypt: 1.4x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CTR) encrypt: 1.4x speed Twofish 3-way-asm vs AES asm (128bit 8kb block ECB) encrypt: 1.0x speed decrypt: 1.0x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CBC) encrypt: 0.84x speed decrypt: 1.09x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CTR) encrypt: 1.15x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-3way-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-aes-asm-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor Also userspace test were run on: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E7330 @ 2.40GHz stepping : 11 Userspace test results: Encryption/decryption of twofish 3-way vs x86_64-asm on AMD Phenom II: encrypt: 1.27x decrypt: 1.25x Encryption/decryption of twofish 3-way vs x86_64-asm on Intel Xeon E7330: encrypt: 1.36x decrypt: 1.36x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 07:47:25 -06:00
config CRYPTO_TWOFISH_X86_64_3WAY
tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
um: several x86 hw-dependent crypto modules won't build on uml Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-08 18:31:22 -06:00
depends on X86 && 64BIT
crypto: twofish - add 3-way parallel x86_64 assembler implemention Patch adds 3-way parallel x86_64 assembly implementation of twofish as new module. New assembler functions crypt data in three blocks chunks, improving cipher performance on out-of-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Summary of the tcrypt benchmarks: Twofish 3-way-asm vs twofish asm (128bit 8kb block ECB) encrypt: 1.3x speed decrypt: 1.3x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CBC) encrypt: 1.07x speed decrypt: 1.4x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CTR) encrypt: 1.4x speed Twofish 3-way-asm vs AES asm (128bit 8kb block ECB) encrypt: 1.0x speed decrypt: 1.0x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CBC) encrypt: 0.84x speed decrypt: 1.09x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CTR) encrypt: 1.15x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-3way-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-aes-asm-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor Also userspace test were run on: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E7330 @ 2.40GHz stepping : 11 Userspace test results: Encryption/decryption of twofish 3-way vs x86_64-asm on AMD Phenom II: encrypt: 1.27x decrypt: 1.25x Encryption/decryption of twofish 3-way vs x86_64-asm on Intel Xeon E7330: encrypt: 1.36x decrypt: 1.36x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 07:47:25 -06:00
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
crypto: twofish-x86_64-3way - remove duplicated glue code and use shared glue code from glue_helper Now that shared glue code is available, convert twofish-x86_64-3way to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:34 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: twofish-x86_64-3way - select LRW and XTS twofish-x86_64-3way uses functions from LRW and XTS modules, so selecting would appear to be better option than using #ifdefs in twofish_glue_3way.c to enable/disable LRW and XTS features. This also fixes build problem when twofish-x86_64-3way would be build into kernel but XTS/LRW are build as modules. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-13 03:53:01 -07:00
select CRYPTO_LRW
select CRYPTO_XTS
crypto: twofish - add 3-way parallel x86_64 assembler implemention Patch adds 3-way parallel x86_64 assembly implementation of twofish as new module. New assembler functions crypt data in three blocks chunks, improving cipher performance on out-of-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Summary of the tcrypt benchmarks: Twofish 3-way-asm vs twofish asm (128bit 8kb block ECB) encrypt: 1.3x speed decrypt: 1.3x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CBC) encrypt: 1.07x speed decrypt: 1.4x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CTR) encrypt: 1.4x speed Twofish 3-way-asm vs AES asm (128bit 8kb block ECB) encrypt: 1.0x speed decrypt: 1.0x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CBC) encrypt: 0.84x speed decrypt: 1.09x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CTR) encrypt: 1.15x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-3way-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-aes-asm-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor Also userspace test were run on: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E7330 @ 2.40GHz stepping : 11 Userspace test results: Encryption/decryption of twofish 3-way vs x86_64-asm on AMD Phenom II: encrypt: 1.27x decrypt: 1.25x Encryption/decryption of twofish 3-way vs x86_64-asm on Intel Xeon E7330: encrypt: 1.36x decrypt: 1.36x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 07:47:25 -06:00
help
Twofish cipher algorithm (x86_64, 3-way parallel).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
This module provides Twofish cipher algorithm that processes three
blocks parallel, utilizing resources of out-of-order CPUs better.
See also:
<http://www.schneier.com/twofish.html>
crypto: twofish - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Twofish block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the 3way-parallel functions from the twofish-x86_64-3way module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) twofish-avx-x86_64 vs. twofish-x86_64-3way 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.97x 1.00x 0.95x 0.97x 0.97x 0.96x 0.95x 0.95x 0.98x 64B 0.99x 0.99x 1.00x 0.99x 0.98x 0.98x 0.99x 0.98x 0.99x 0.98x 256B 1.20x 1.21x 1.00x 1.19x 1.15x 1.14x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.24x 1.26x 1.28x 1.26x 1.27x 8192B 1.31x 1.32x 1.00x 1.31x 1.25x 1.25x 1.28x 1.29x 1.28x 1.30x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.96x 1.00x 0.96x 0.97x 0.98x 0.95x 0.95x 0.95x 0.96x 64B 1.00x 0.99x 1.00x 0.98x 0.98x 1.01x 0.98x 0.98x 0.98x 0.98x 256B 1.20x 1.21x 1.00x 1.21x 1.15x 1.15x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.23x 1.26x 1.27x 1.26x 1.27x 8192B 1.31x 1.33x 1.00x 1.31x 1.26x 1.26x 1.29x 1.29x 1.28x 1.30x twofish-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.19x 1.63x ecb-dec 1.18x 1.62x cbc-enc 0.75x 1.03x cbc-dec 1.23x 1.67x ctr-enc 1.24x 1.65x ctr-dec 1.24x 1.65x lrw-enc 1.15x 1.53x lrw-dec 1.14x 1.52x xts-enc 1.16x 1.56x xts-dec 1.16x 1.56x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-28 07:54:24 -06:00
config CRYPTO_TWOFISH_AVX_X86_64
tristate "Twofish cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-20 01:55:41 -06:00
select CRYPTO_ABLK_HELPER
crypto: twofish-avx - remove duplicated glue code and use shared glue code from glue_helper Now that shared glue code is available, convert twofish-avx to use it. Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-18 05:07:39 -06:00
select CRYPTO_GLUE_HELPER_X86
crypto: twofish - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Twofish block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the 3way-parallel functions from the twofish-x86_64-3way module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) twofish-avx-x86_64 vs. twofish-x86_64-3way 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.97x 1.00x 0.95x 0.97x 0.97x 0.96x 0.95x 0.95x 0.98x 64B 0.99x 0.99x 1.00x 0.99x 0.98x 0.98x 0.99x 0.98x 0.99x 0.98x 256B 1.20x 1.21x 1.00x 1.19x 1.15x 1.14x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.24x 1.26x 1.28x 1.26x 1.27x 8192B 1.31x 1.32x 1.00x 1.31x 1.25x 1.25x 1.28x 1.29x 1.28x 1.30x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.96x 1.00x 0.96x 0.97x 0.98x 0.95x 0.95x 0.95x 0.96x 64B 1.00x 0.99x 1.00x 0.98x 0.98x 1.01x 0.98x 0.98x 0.98x 0.98x 256B 1.20x 1.21x 1.00x 1.21x 1.15x 1.15x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.23x 1.26x 1.27x 1.26x 1.27x 8192B 1.31x 1.33x 1.00x 1.31x 1.26x 1.26x 1.29x 1.29x 1.28x 1.30x twofish-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.19x 1.63x ecb-dec 1.18x 1.62x cbc-enc 0.75x 1.03x cbc-dec 1.23x 1.67x ctr-enc 1.24x 1.65x ctr-dec 1.24x 1.65x lrw-enc 1.15x 1.53x lrw-dec 1.14x 1.52x xts-enc 1.16x 1.56x xts-dec 1.16x 1.56x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-28 07:54:24 -06:00
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
select CRYPTO_TWOFISH_X86_64_3WAY
select CRYPTO_LRW
select CRYPTO_XTS
help
Twofish cipher algorithm (x86_64/AVX).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
This module provides the Twofish cipher algorithm that processes
eight blocks parallel using the AVX Instruction Set.
See also:
<http://www.schneier.com/twofish.html>
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
comment "Compression"
config CRYPTO_DEFLATE
tristate "Deflate compression algorithm"
select CRYPTO_ALGAPI
select ZLIB_INFLATE
select ZLIB_DEFLATE
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 02:24:15 -06:00
help
[CRYPTO] kconfig: Ordering cleanup Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-05 07:04:48 -06:00
This is the Deflate algorithm (RFC1951), specified for use in
IPSec with the IPCOMP protocol (RFC3173, RFC2394).
You will most probably want this if using IPSec.
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 02:24:15 -06:00
crypto: zlib - New zlib crypto module, using pcomp Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-04 00:15:49 -07:00
config CRYPTO_ZLIB
tristate "Zlib compression algorithm"
select CRYPTO_PCOMP
select ZLIB_INFLATE
select ZLIB_DEFLATE
select NLATTR
help
This is the zlib algorithm.
[CRYPTO] lzo: Add LZO compression algorithm support Add LZO compression algorithm support Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-07 01:53:23 -07:00
config CRYPTO_LZO
tristate "LZO compression algorithm"
select CRYPTO_ALGAPI
select LZO_COMPRESS
select LZO_DECOMPRESS
help
This is the LZO algorithm.
powerpc/crypto: add 842 crypto driver This patch add the 842 cryptographic API driver that submits compression requests to the 842 hardware compression accelerator driver (nx-compress). If the hardware accelerator goes offline for any reason (dynamic disable, migration, etc...), this driver will use LZO as a software failover for all future compression requests. For decompression requests, the 842 hardware driver contains a software implementation of the 842 decompressor to support the decompression of data that was compressed before the accelerator went offline. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-19 08:42:41 -06:00
config CRYPTO_842
tristate "842 compression algorithm"
crypto: 842 - change 842 alg to use software Change the crypto 842 compression alg to use the software 842 compression and decompression library. Add the crypto driver_name as "842-generic". Remove the fallback to LZO compression. Previously, this crypto compression alg attemped 842 compression using PowerPC hardware, and fell back to LZO compression and decompression if the 842 PowerPC hardware was unavailable or failed. This should not fall back to any other compression method, however; users of this crypto compression alg can fallback if desired, and transparent fallback tricks callers into thinking they are getting 842 compression when they actually get LZO compression - the failure of the 842 hardware should not be transparent to the caller. The crypto compression alg for a hardware device also should not be located in crypto/ so this is now a software-only implementation that uses the 842 software compression/decompression library. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-07 11:49:15 -06:00
select CRYPTO_ALGAPI
select 842_COMPRESS
select 842_DECOMPRESS
powerpc/crypto: add 842 crypto driver This patch add the 842 cryptographic API driver that submits compression requests to the 842 hardware compression accelerator driver (nx-compress). If the hardware accelerator goes offline for any reason (dynamic disable, migration, etc...), this driver will use LZO as a software failover for all future compression requests. For decompression requests, the 842 hardware driver contains a software implementation of the 842 decompressor to support the decompression of data that was compressed before the accelerator went offline. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-19 08:42:41 -06:00
help
This is the 842 algorithm.
crypto: add lz4 Cryptographic API Add support for lz4 and lz4hc compression algorithm using the lib/lz4/* codebase. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:51 -06:00
config CRYPTO_LZ4
tristate "LZ4 compression algorithm"
select CRYPTO_ALGAPI
select LZ4_COMPRESS
select LZ4_DECOMPRESS
help
This is the LZ4 algorithm.
config CRYPTO_LZ4HC
tristate "LZ4HC compression algorithm"
select CRYPTO_ALGAPI
select LZ4HC_COMPRESS
select LZ4_DECOMPRESS
help
This is the LZ4 high compression mode algorithm.
powerpc/crypto: add 842 crypto driver This patch add the 842 cryptographic API driver that submits compression requests to the 842 hardware compression accelerator driver (nx-compress). If the hardware accelerator goes offline for any reason (dynamic disable, migration, etc...), this driver will use LZO as a software failover for all future compression requests. For decompression requests, the 842 hardware driver contains a software implementation of the 842 decompressor to support the decompression of data that was compressed before the accelerator went offline. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-19 08:42:41 -06:00
crypto: rng - RNG interface and implementation This patch adds a random number generator interface as well as a cryptographic pseudo-random number generator based on AES. It is meant to be used in cases where a deterministic CPRNG is required. One of the first applications will be as an input in the IPsec IV generation process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-14 06:15:52 -06:00
comment "Random Number Generation"
config CRYPTO_ANSI_CPRNG
tristate "Pseudo Random Number Generation for Cryptographic modules"
select CRYPTO_AES
select CRYPTO_RNG
help
This option enables the generic pseudo random number generator
for cryptographic modules. Uses the Algorithm specified in
crypto: fix typo in Kconfig help text Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-26 17:00:10 -07:00
ANSI X9.31 A.2.4. Note that this option must be enabled if
CRYPTO_FIPS is selected
crypto: rng - RNG interface and implementation This patch adds a random number generator interface as well as a cryptographic pseudo-random number generator based on AES. It is meant to be used in cases where a deterministic CPRNG is required. One of the first applications will be as an input in the IPsec IV generation process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-14 06:15:52 -06:00
crypto: drbg - Use Kconfig to ensure at least one RNG option is set This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 08:15:08 -06:00
menuconfig CRYPTO_DRBG_MENU
crypto: drbg - DRBG kernel configuration options The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-05-31 09:22:31 -06:00
tristate "NIST SP800-90A DRBG"
help
NIST SP800-90A compliant DRBG. In the following submenu, one or
more of the DRBG types must be selected.
crypto: drbg - Use Kconfig to ensure at least one RNG option is set This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 08:15:08 -06:00
if CRYPTO_DRBG_MENU
crypto: drbg - DRBG kernel configuration options The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-05-31 09:22:31 -06:00
config CRYPTO_DRBG_HMAC
crypto: rng - Make DRBG the default RNG This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT that simply selects the DRBG. This new option is then selected by the IV generators. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 00:49:31 -06:00
bool
crypto: drbg - DRBG kernel configuration options The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-05-31 09:22:31 -06:00
default y
select CRYPTO_HMAC
crypto: drbg - Add select on sha256 The hash-based DRBG variants all use sha256 so we need to add a select on it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-10 18:55:10 -06:00
select CRYPTO_SHA256
crypto: drbg - DRBG kernel configuration options The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-05-31 09:22:31 -06:00
config CRYPTO_DRBG_HASH
bool "Enable Hash DRBG"
crypto: drbg - Add select on sha256 The hash-based DRBG variants all use sha256 so we need to add a select on it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-10 18:55:10 -06:00
select CRYPTO_SHA256
crypto: drbg - DRBG kernel configuration options The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-05-31 09:22:31 -06:00
help
Enable the Hash DRBG variant as defined in NIST SP800-90A.
config CRYPTO_DRBG_CTR
bool "Enable CTR DRBG"
select CRYPTO_AES
help
Enable the CTR DRBG variant as defined in NIST SP800-90A.
crypto: drbg - Use Kconfig to ensure at least one RNG option is set This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 08:15:08 -06:00
config CRYPTO_DRBG
tristate
crypto: rng - Make DRBG the default RNG This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT that simply selects the DRBG. This new option is then selected by the IV generators. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 00:49:31 -06:00
default CRYPTO_DRBG_MENU
crypto: drbg - Use Kconfig to ensure at least one RNG option is set This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 08:15:08 -06:00
select CRYPTO_RNG
crypto: jitterentropy - add jitterentropy RNG The CPU Jitter RNG provides a source of good entropy by collecting CPU executing time jitter. The entropy in the CPU execution time jitter is magnified by the CPU Jitter Random Number Generator. The CPU Jitter Random Number Generator uses the CPU execution timing jitter to generate a bit stream which complies with different statistical measurements that determine the bit stream is random. The CPU Jitter Random Number Generator delivers entropy which follows information theoretical requirements. Based on these studies and the implementation, the caller can assume that one bit of data extracted from the CPU Jitter Random Number Generator holds one bit of entropy. The CPU Jitter Random Number Generator provides a decentralized source of entropy, i.e. every caller can operate on a private state of the entropy pool. The RNG does not have any dependencies on any other service in the kernel. The RNG only needs a high-resolution time stamp. Further design details, the cryptographic assessment and large array of test results are documented at http://www.chronox.de/jent.html. CC: Andreas Steffen <andreas.steffen@strongswan.org> CC: Theodore Ts'o <tytso@mit.edu> CC: Sandy Harris <sandyinchina@gmail.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 07:10:20 -06:00
select CRYPTO_JITTERENTROPY
crypto: drbg - Use Kconfig to ensure at least one RNG option is set This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 08:15:08 -06:00
endif # if CRYPTO_DRBG_MENU
crypto: drbg - DRBG kernel configuration options The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-05-31 09:22:31 -06:00
crypto: jitterentropy - add jitterentropy RNG The CPU Jitter RNG provides a source of good entropy by collecting CPU executing time jitter. The entropy in the CPU execution time jitter is magnified by the CPU Jitter Random Number Generator. The CPU Jitter Random Number Generator uses the CPU execution timing jitter to generate a bit stream which complies with different statistical measurements that determine the bit stream is random. The CPU Jitter Random Number Generator delivers entropy which follows information theoretical requirements. Based on these studies and the implementation, the caller can assume that one bit of data extracted from the CPU Jitter Random Number Generator holds one bit of entropy. The CPU Jitter Random Number Generator provides a decentralized source of entropy, i.e. every caller can operate on a private state of the entropy pool. The RNG does not have any dependencies on any other service in the kernel. The RNG only needs a high-resolution time stamp. Further design details, the cryptographic assessment and large array of test results are documented at http://www.chronox.de/jent.html. CC: Andreas Steffen <andreas.steffen@strongswan.org> CC: Theodore Ts'o <tytso@mit.edu> CC: Sandy Harris <sandyinchina@gmail.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 07:10:20 -06:00
config CRYPTO_JITTERENTROPY
tristate "Jitterentropy Non-Deterministic Random Number Generator"
help
The Jitterentropy RNG is a noise that is intended
to provide seed to another RNG. The RNG does not
perform any cryptographic whitening of the generated
random numbers. This Jitterentropy RNG registers with
the kernel crypto API and can be used by any caller.
crypto: af_alg - User-space interface for Crypto API This patch creates the backbone of the user-space interface for the Crypto API, through a new socket family AF_ALG. Each session corresponds to one or more connections obtained from that socket. The number depends on the number of inputs/outputs of that particular type of operation. For most types there will be a s ingle connection/file descriptor that is used for both input and output. AEAD is one of the few that require two inputs. Each algorithm type will provide its own implementation that plugs into af_alg. They're keyed using a string such as "skcipher" or "hash". IOW this patch only contains the boring bits that is required to hold everything together. Thakns to Miloslav Trmac for reviewing this and contributing fixes and improvements. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Martin Willi <martin@strongswan.org>
2010-10-19 07:12:39 -06:00
config CRYPTO_USER_API
tristate
crypto: algif_hash - User-space interface for hash operations This patch adds the af_alg plugin for hash, corresponding to the ahash kernel operation type. Keys can optionally be set through the setsockopt interface. Each sendmsg call will finalise the hash unless sent with a MSG_MORE flag. Partial hash states can be cloned using accept(2). The interface is completely synchronous, all operations will complete prior to the system call returning. Both sendmsg(2) and splice(2) support reading the user-space data directly without copying (except that the Crypto API itself may copy the data if alignment is off). For now only the splice(2) interface supports performing digest instead of init/update/final. In future the sendmsg(2) interface will also be modified to use digest/finup where possible so that hardware that cannot return a partial hash state can still benefit from this interface. Thakns to Miloslav Trmac for reviewing this and contributing fixes and improvements. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Martin Willi <martin@strongswan.org>
2010-10-19 07:23:00 -06:00
config CRYPTO_USER_API_HASH
tristate "User-space interface for hash algorithms"
crypto: af_alg - Add dependency on NET Add missing dependency on NET since we require sockets for our interface. Should really be a select but kconfig doesn't like that: net/Kconfig:6:error: found recursive dependency: NET -> NETWORK_FILESYSTEMS -> AFS_FS -> AF_RXRPC -> CRYPTO -> CRYPTO_USER_API_HASH -> CRYPTO_USER_API -> NET Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-29 07:56:03 -07:00
depends on NET
crypto: algif_hash - User-space interface for hash operations This patch adds the af_alg plugin for hash, corresponding to the ahash kernel operation type. Keys can optionally be set through the setsockopt interface. Each sendmsg call will finalise the hash unless sent with a MSG_MORE flag. Partial hash states can be cloned using accept(2). The interface is completely synchronous, all operations will complete prior to the system call returning. Both sendmsg(2) and splice(2) support reading the user-space data directly without copying (except that the Crypto API itself may copy the data if alignment is off). For now only the splice(2) interface supports performing digest instead of init/update/final. In future the sendmsg(2) interface will also be modified to use digest/finup where possible so that hardware that cannot return a partial hash state can still benefit from this interface. Thakns to Miloslav Trmac for reviewing this and contributing fixes and improvements. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Martin Willi <martin@strongswan.org>
2010-10-19 07:23:00 -06:00
select CRYPTO_HASH
select CRYPTO_USER_API
help
This option enables the user-spaces interface for hash
algorithms.
crypto: algif_skcipher - User-space interface for skcipher operations This patch adds the af_alg plugin for symmetric key ciphers, corresponding to the ablkcipher kernel operation type. Keys can optionally be set through the setsockopt interface. Once a sendmsg call occurs without MSG_MORE no further writes may be made to the socket until all previous data has been read. IVs and and whether encryption/decryption is performed can be set through the setsockopt interface or as a control message to sendmsg. The interface is completely synchronous, all operations are carried out in recvmsg(2) and will complete prior to the system call returning. The splice(2) interface support reading the user-space data directly without copying (except that the Crypto API itself may copy the data if alignment is off). The recvmsg(2) interface supports directly writing to user-space without additional copying, i.e., the kernel crypto interface will receive the user-space address as its output SG list. Thakns to Miloslav Trmac for reviewing this and contributing fixes and improvements. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net>
2010-10-19 07:31:55 -06:00
config CRYPTO_USER_API_SKCIPHER
tristate "User-space interface for symmetric key cipher algorithms"
crypto: af_alg - Add dependency on NET Add missing dependency on NET since we require sockets for our interface. Should really be a select but kconfig doesn't like that: net/Kconfig:6:error: found recursive dependency: NET -> NETWORK_FILESYSTEMS -> AFS_FS -> AF_RXRPC -> CRYPTO -> CRYPTO_USER_API_HASH -> CRYPTO_USER_API -> NET Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-29 07:56:03 -07:00
depends on NET
crypto: algif_skcipher - User-space interface for skcipher operations This patch adds the af_alg plugin for symmetric key ciphers, corresponding to the ablkcipher kernel operation type. Keys can optionally be set through the setsockopt interface. Once a sendmsg call occurs without MSG_MORE no further writes may be made to the socket until all previous data has been read. IVs and and whether encryption/decryption is performed can be set through the setsockopt interface or as a control message to sendmsg. The interface is completely synchronous, all operations are carried out in recvmsg(2) and will complete prior to the system call returning. The splice(2) interface support reading the user-space data directly without copying (except that the Crypto API itself may copy the data if alignment is off). The recvmsg(2) interface supports directly writing to user-space without additional copying, i.e., the kernel crypto interface will receive the user-space address as its output SG list. Thakns to Miloslav Trmac for reviewing this and contributing fixes and improvements. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net>
2010-10-19 07:31:55 -06:00
select CRYPTO_BLKCIPHER
select CRYPTO_USER_API
help
This option enables the user-spaces interface for symmetric
key cipher algorithms.
crypto: algif_rng - enable RNG interface compilation Enable compilation of the RNG AF_ALG support and provide a Kconfig option to compile the RNG AF_ALG support. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-25 15:00:39 -07:00
config CRYPTO_USER_API_RNG
tristate "User-space interface for random number generator algorithms"
depends on NET
select CRYPTO_RNG
select CRYPTO_USER_API
help
This option enables the user-spaces interface for random
number generator algorithms.
Revert "crypto: algif_aead - Disable AEAD user-space for now" This reverts commit f858c7bcca8c20761a20593439fe998b4b67e86b as the algif_aead interface has been switched over to the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 21:30:35 -06:00
config CRYPTO_USER_API_AEAD
tristate "User-space interface for AEAD cipher algorithms"
depends on NET
select CRYPTO_AEAD
select CRYPTO_USER_API
help
This option enables the user-spaces interface for AEAD
cipher algorithms.
crypto: provide single place for hash algo information This patch provides a single place for information about hash algorithms, such as hash sizes and kernel driver names, which will be used by IMA and the public key code. Changelog: - Fix sparse and checkpatch warnings - Move hash algo enums to uapi for userspace signing functions. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-06 06:40:01 -06:00
config CRYPTO_HASH_INFO
bool
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
source "drivers/crypto/Kconfig"
KEYS: Implement asymmetric key type Create a key type that can be used to represent an asymmetric key type for use in appropriate cryptographic operations, such as encryption, decryption, signature generation and signature verification. The key type is "asymmetric" and can provide access to a variety of cryptographic algorithms. Possibly, this would be better as "public_key" - but that has the disadvantage that "public key" is an overloaded term. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 08:17:21 -06:00
source crypto/asymmetric_keys/Kconfig
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 05:08:13 -06:00
endif # if CRYPTO
Reference in a new issue Copy permalink