kernel-fxtec-pro1x/sound/firewire/amdtp-am824.c

399 lines
11 KiB
C
Raw Normal View History

/*
* AM824 format in Audio and Music Data Transmission Protocol (IEC 61883-6)
*
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
* Copyright (c) 2015 Takashi Sakamoto <o-takashi@sakamocchi.jp>
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
#include <linux/slab.h>
#include "amdtp-am824.h"
#define CIP_FMT_AM 0x10
/* "Clock-based rate control mode" is just supported. */
#define AMDTP_FDF_AM824 0x00
/*
* Nominally 3125 bytes/second, but the MIDI port's clock might be
* 1% too slow, and the bus clock 100 ppm too fast.
*/
#define MIDI_BYTES_PER_SECOND 3093
/*
* Several devices look only at the first eight data blocks.
* In any case, this is more than enough for the MIDI data rate.
*/
#define MAX_MIDI_RX_BLOCKS 8
struct amdtp_am824 {
struct snd_rawmidi_substream *midi[AM824_MAX_CHANNELS_FOR_MIDI * 8];
int midi_fifo_limit;
int midi_fifo_used[AM824_MAX_CHANNELS_FOR_MIDI * 8];
unsigned int pcm_channels;
unsigned int midi_ports;
u8 pcm_positions[AM824_MAX_CHANNELS_FOR_PCM];
u8 midi_position;
unsigned int frame_multiplier;
};
/**
* amdtp_am824_set_parameters - set stream parameters
* @s: the AMDTP stream to configure
* @rate: the sample rate
* @pcm_channels: the number of PCM samples in each data block, to be encoded
* as AM824 multi-bit linear audio
* @midi_ports: the number of MIDI ports (i.e., MPX-MIDI Data Channels)
* @double_pcm_frames: one data block transfers two PCM frames
*
* The parameters must be set before the stream is started, and must not be
* changed while the stream is running.
*/
int amdtp_am824_set_parameters(struct amdtp_stream *s, unsigned int rate,
unsigned int pcm_channels,
unsigned int midi_ports,
bool double_pcm_frames)
{
struct amdtp_am824 *p = s->protocol;
unsigned int midi_channels;
unsigned int i;
int err;
if (amdtp_stream_running(s))
return -EINVAL;
if (pcm_channels > AM824_MAX_CHANNELS_FOR_PCM)
return -EINVAL;
midi_channels = DIV_ROUND_UP(midi_ports, 8);
if (midi_channels > AM824_MAX_CHANNELS_FOR_MIDI)
return -EINVAL;
if (WARN_ON(amdtp_stream_running(s)) ||
WARN_ON(pcm_channels > AM824_MAX_CHANNELS_FOR_PCM) ||
WARN_ON(midi_channels > AM824_MAX_CHANNELS_FOR_MIDI))
return -EINVAL;
err = amdtp_stream_set_parameters(s, rate,
pcm_channels + midi_channels);
if (err < 0)
return err;
s->fdf = AMDTP_FDF_AM824 | s->sfc;
p->pcm_channels = pcm_channels;
p->midi_ports = midi_ports;
/*
* In IEC 61883-6, one data block represents one event. In ALSA, one
* event equals to one PCM frame. But Dice has a quirk at higher
* sampling rate to transfer two PCM frames in one data block.
*/
if (double_pcm_frames)
p->frame_multiplier = 2;
else
p->frame_multiplier = 1;
/* init the position map for PCM and MIDI channels */
for (i = 0; i < pcm_channels; i++)
p->pcm_positions[i] = i;
p->midi_position = p->pcm_channels;
/*
* We do not know the actual MIDI FIFO size of most devices. Just
* assume two bytes, i.e., one byte can be received over the bus while
* the previous one is transmitted over MIDI.
* (The value here is adjusted for midi_ratelimit_per_packet().)
*/
p->midi_fifo_limit = rate - MIDI_BYTES_PER_SECOND * s->syt_interval + 1;
return 0;
}
EXPORT_SYMBOL_GPL(amdtp_am824_set_parameters);
/**
* amdtp_am824_set_pcm_position - set an index of data channel for a channel
* of PCM frame
* @s: the AMDTP stream
* @index: the index of data channel in an data block
* @position: the channel of PCM frame
*/
void amdtp_am824_set_pcm_position(struct amdtp_stream *s, unsigned int index,
unsigned int position)
{
struct amdtp_am824 *p = s->protocol;
if (index < p->pcm_channels)
p->pcm_positions[index] = position;
}
EXPORT_SYMBOL_GPL(amdtp_am824_set_pcm_position);
/**
* amdtp_am824_set_midi_position - set a index of data channel for MIDI
* conformant data channel
* @s: the AMDTP stream
* @position: the index of data channel in an data block
*/
void amdtp_am824_set_midi_position(struct amdtp_stream *s,
unsigned int position)
{
struct amdtp_am824 *p = s->protocol;
p->midi_position = position;
}
EXPORT_SYMBOL_GPL(amdtp_am824_set_midi_position);
static void write_pcm_s32(struct amdtp_stream *s,
struct snd_pcm_substream *pcm,
__be32 *buffer, unsigned int frames)
{
struct amdtp_am824 *p = s->protocol;
struct snd_pcm_runtime *runtime = pcm->runtime;
unsigned int channels, remaining_frames, i, c;
const u32 *src;
channels = p->pcm_channels;
src = (void *)runtime->dma_area +
frames_to_bytes(runtime, s->pcm_buffer_pointer);
remaining_frames = runtime->buffer_size - s->pcm_buffer_pointer;
for (i = 0; i < frames; ++i) {
for (c = 0; c < channels; ++c) {
buffer[p->pcm_positions[c]] =
cpu_to_be32((*src >> 8) | 0x40000000);
src++;
}
buffer += s->data_block_quadlets;
if (--remaining_frames == 0)
src = (void *)runtime->dma_area;
}
}
static void read_pcm_s32(struct amdtp_stream *s,
struct snd_pcm_substream *pcm,
__be32 *buffer, unsigned int frames)
{
struct amdtp_am824 *p = s->protocol;
struct snd_pcm_runtime *runtime = pcm->runtime;
unsigned int channels, remaining_frames, i, c;
u32 *dst;
channels = p->pcm_channels;
dst = (void *)runtime->dma_area +
frames_to_bytes(runtime, s->pcm_buffer_pointer);
remaining_frames = runtime->buffer_size - s->pcm_buffer_pointer;
for (i = 0; i < frames; ++i) {
for (c = 0; c < channels; ++c) {
*dst = be32_to_cpu(buffer[p->pcm_positions[c]]) << 8;
dst++;
}
buffer += s->data_block_quadlets;
if (--remaining_frames == 0)
dst = (void *)runtime->dma_area;
}
}
static void write_pcm_silence(struct amdtp_stream *s,
__be32 *buffer, unsigned int frames)
{
struct amdtp_am824 *p = s->protocol;
unsigned int i, c, channels = p->pcm_channels;
for (i = 0; i < frames; ++i) {
for (c = 0; c < channels; ++c)
buffer[p->pcm_positions[c]] = cpu_to_be32(0x40000000);
buffer += s->data_block_quadlets;
}
}
/**
* amdtp_am824_add_pcm_hw_constraints - add hw constraints for PCM substream
* @s: the AMDTP stream for AM824 data block, must be initialized.
* @runtime: the PCM substream runtime
*
*/
int amdtp_am824_add_pcm_hw_constraints(struct amdtp_stream *s,
struct snd_pcm_runtime *runtime)
{
int err;
err = amdtp_stream_add_pcm_hw_constraints(s, runtime);
if (err < 0)
return err;
/* AM824 in IEC 61883-6 can deliver 24bit data. */
return snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
}
EXPORT_SYMBOL_GPL(amdtp_am824_add_pcm_hw_constraints);
/**
* amdtp_am824_midi_trigger - start/stop playback/capture with a MIDI device
* @s: the AMDTP stream
* @port: index of MIDI port
* @midi: the MIDI device to be started, or %NULL to stop the current device
*
* Call this function on a running isochronous stream to enable the actual
* transmission of MIDI data. This function should be called from the MIDI
* device's .trigger callback.
*/
void amdtp_am824_midi_trigger(struct amdtp_stream *s, unsigned int port,
struct snd_rawmidi_substream *midi)
{
struct amdtp_am824 *p = s->protocol;
if (port < p->midi_ports)
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 15:07:29 -06:00
WRITE_ONCE(p->midi[port], midi);
}
EXPORT_SYMBOL_GPL(amdtp_am824_midi_trigger);
/*
* To avoid sending MIDI bytes at too high a rate, assume that the receiving
* device has a FIFO, and track how much it is filled. This values increases
* by one whenever we send one byte in a packet, but the FIFO empties at
* a constant rate independent of our packet rate. One packet has syt_interval
* samples, so the number of bytes that empty out of the FIFO, per packet(!),
* is MIDI_BYTES_PER_SECOND * syt_interval / sample_rate. To avoid storing
* fractional values, the values in midi_fifo_used[] are measured in bytes
* multiplied by the sample rate.
*/
static bool midi_ratelimit_per_packet(struct amdtp_stream *s, unsigned int port)
{
struct amdtp_am824 *p = s->protocol;
int used;
used = p->midi_fifo_used[port];
if (used == 0) /* common shortcut */
return true;
used -= MIDI_BYTES_PER_SECOND * s->syt_interval;
used = max(used, 0);
p->midi_fifo_used[port] = used;
return used < p->midi_fifo_limit;
}
static void midi_rate_use_one_byte(struct amdtp_stream *s, unsigned int port)
{
struct amdtp_am824 *p = s->protocol;
p->midi_fifo_used[port] += amdtp_rate_table[s->sfc];
}
static void write_midi_messages(struct amdtp_stream *s, __be32 *buffer,
unsigned int frames)
{
struct amdtp_am824 *p = s->protocol;
unsigned int f, port;
u8 *b;
for (f = 0; f < frames; f++) {
b = (u8 *)&buffer[p->midi_position];
port = (s->data_block_counter + f) % 8;
if (f < MAX_MIDI_RX_BLOCKS &&
midi_ratelimit_per_packet(s, port) &&
p->midi[port] != NULL &&
snd_rawmidi_transmit(p->midi[port], &b[1], 1) == 1) {
midi_rate_use_one_byte(s, port);
b[0] = 0x81;
} else {
b[0] = 0x80;
b[1] = 0;
}
b[2] = 0;
b[3] = 0;
buffer += s->data_block_quadlets;
}
}
static void read_midi_messages(struct amdtp_stream *s,
__be32 *buffer, unsigned int frames)
{
struct amdtp_am824 *p = s->protocol;
unsigned int f, port;
int len;
u8 *b;
for (f = 0; f < frames; f++) {
ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages commit 7fbd1753b64eafe21cf842348a40a691d0dee440 upstream. In IEC 61883-6, 8 MIDI data streams are multiplexed into single MIDI conformant data channel. The index of stream is calculated by modulo 8 of the value of data block counter. In fireworks, the value of data block counter in CIP header has a quirk with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA IEC 61883-1/6 packet streaming engine to miss detection of MIDI messages. This commit fixes the miss detection to modify the value of data block counter for the modulo calculation. For maintainers, this bug exists since a commit 18f5ed365d3f ("ALSA: fireworks/firewire-lib: add support for recent firmware quirk") in Linux kernel v4.2. There're many changes since the commit. This fix can be backported to Linux kernel v4.4 or later. I tagged a base commit to the backport for your convenience. Besides, my work for Linux kernel v5.3 brings heavy code refactoring and some structure members are renamed in 'sound/firewire/amdtp-stream.h'. The content of this patch brings conflict when merging -rc tree with this patch and the latest tree. I request maintainers to solve the conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'. Fixes: df075feefbd3 ("ALSA: firewire-lib: complete AM824 data block processing layer") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-01 08:43:53 -06:00
port = (8 - s->tx_first_dbc + s->data_block_counter + f) % 8;
b = (u8 *)&buffer[p->midi_position];
len = b[0] - 0x80;
if ((1 <= len) && (len <= 3) && (p->midi[port]))
snd_rawmidi_receive(p->midi[port], b + 1, len);
buffer += s->data_block_quadlets;
}
}
static unsigned int process_rx_data_blocks(struct amdtp_stream *s, __be32 *buffer,
unsigned int data_blocks, unsigned int *syt)
{
struct amdtp_am824 *p = s->protocol;
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 15:07:29 -06:00
struct snd_pcm_substream *pcm = READ_ONCE(s->pcm);
unsigned int pcm_frames;
if (pcm) {
write_pcm_s32(s, pcm, buffer, data_blocks);
pcm_frames = data_blocks * p->frame_multiplier;
} else {
write_pcm_silence(s, buffer, data_blocks);
pcm_frames = 0;
}
if (p->midi_ports)
write_midi_messages(s, buffer, data_blocks);
return pcm_frames;
}
static unsigned int process_tx_data_blocks(struct amdtp_stream *s, __be32 *buffer,
unsigned int data_blocks, unsigned int *syt)
{
struct amdtp_am824 *p = s->protocol;
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 15:07:29 -06:00
struct snd_pcm_substream *pcm = READ_ONCE(s->pcm);
unsigned int pcm_frames;
if (pcm) {
read_pcm_s32(s, pcm, buffer, data_blocks);
pcm_frames = data_blocks * p->frame_multiplier;
} else {
pcm_frames = 0;
}
if (p->midi_ports)
read_midi_messages(s, buffer, data_blocks);
return pcm_frames;
}
/**
* amdtp_am824_init - initialize an AMDTP stream structure to handle AM824
* data block
* @s: the AMDTP stream to initialize
* @unit: the target of the stream
* @dir: the direction of stream
* @flags: the packet transmission method to use
*/
int amdtp_am824_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir, enum cip_flags flags)
{
amdtp_stream_process_data_blocks_t process_data_blocks;
if (dir == AMDTP_IN_STREAM)
process_data_blocks = process_tx_data_blocks;
else
process_data_blocks = process_rx_data_blocks;
return amdtp_stream_init(s, unit, dir, flags, CIP_FMT_AM,
process_data_blocks,
sizeof(struct amdtp_am824));
}
EXPORT_SYMBOL_GPL(amdtp_am824_init);