kernel-fxtec-pro1x/drivers/isdn/hisax/s0box.c

262 lines
7 KiB
C
Raw Normal View History

/* $Id: s0box.c,v 2.6.2.4 2004/01/13 23:48:39 keil Exp $
*
* low level stuff for Creatix S0BOX
*
* Author Enrik Berkhan
* Copyright by Enrik Berkhan <enrik@starfleet.inka.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/init.h>
#include "hisax.h"
#include "isac.h"
#include "hscx.h"
#include "isdnl1.h"
static const char *s0box_revision = "$Revision: 2.6.2.4 $";
static inline void
writereg(unsigned int padr, signed int addr, u_char off, u_char val) {
outb_p(0x1c, padr + 2);
outb_p(0x14, padr + 2);
outb_p((addr + off) & 0x7f, padr);
outb_p(0x16, padr + 2);
outb_p(val, padr);
outb_p(0x17, padr + 2);
outb_p(0x14, padr + 2);
outb_p(0x1c, padr + 2);
}
static u_char nibtab[] = { 1, 9, 5, 0xd, 3, 0xb, 7, 0xf,
0, 0, 0, 0, 0, 0, 0, 0,
0, 8, 4, 0xc, 2, 0xa, 6, 0xe };
static inline u_char
readreg(unsigned int padr, signed int addr, u_char off) {
register u_char n1, n2;
outb_p(0x1c, padr + 2);
outb_p(0x14, padr + 2);
outb_p((addr + off) | 0x80, padr);
outb_p(0x16, padr + 2);
outb_p(0x17, padr + 2);
n1 = (inb_p(padr + 1) >> 3) & 0x17;
outb_p(0x16, padr + 2);
n2 = (inb_p(padr + 1) >> 3) & 0x17;
outb_p(0x14, padr + 2);
outb_p(0x1c, padr + 2);
return nibtab[n1] | (nibtab[n2] << 4);
}
static inline void
read_fifo(unsigned int padr, signed int adr, u_char *data, int size)
{
int i;
register u_char n1, n2;
outb_p(0x1c, padr + 2);
outb_p(0x14, padr + 2);
outb_p(adr | 0x80, padr);
outb_p(0x16, padr + 2);
for (i = 0; i < size; i++) {
outb_p(0x17, padr + 2);
n1 = (inb_p(padr + 1) >> 3) & 0x17;
outb_p(0x16, padr + 2);
n2 = (inb_p(padr + 1) >> 3) & 0x17;
*(data++) = nibtab[n1] | (nibtab[n2] << 4);
}
outb_p(0x14, padr + 2);
outb_p(0x1c, padr + 2);
return;
}
static inline void
write_fifo(unsigned int padr, signed int adr, u_char *data, int size)
{
int i;
outb_p(0x1c, padr + 2);
outb_p(0x14, padr + 2);
outb_p(adr & 0x7f, padr);
for (i = 0; i < size; i++) {
outb_p(0x16, padr + 2);
outb_p(*(data++), padr);
outb_p(0x17, padr + 2);
}
outb_p(0x14, padr + 2);
outb_p(0x1c, padr + 2);
return;
}
/* Interface functions */
static u_char
ReadISAC(struct IsdnCardState *cs, u_char offset)
{
return (readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.isac, offset));
}
static void
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.isac, offset, value);
}
static void
ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
{
read_fifo(cs->hw.teles3.cfg_reg, cs->hw.teles3.isacfifo, data, size);
}
static void
WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
{
write_fifo(cs->hw.teles3.cfg_reg, cs->hw.teles3.isacfifo, data, size);
}
static u_char
ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
{
return (readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[hscx], offset));
}
static void
WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
{
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[hscx], offset, value);
}
/*
* fast interrupt HSCX stuff goes here
*/
#define READHSCX(cs, nr, reg) readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[nr], reg)
#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[nr], reg, data)
#define READHSCXFIFO(cs, nr, ptr, cnt) read_fifo(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscxfifo[nr], ptr, cnt)
#define WRITEHSCXFIFO(cs, nr, ptr, cnt) write_fifo(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscxfifo[nr], ptr, cnt)
#include "hscx_irq.c"
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
s0box_interrupt(int intno, void *dev_id)
{
#define MAXCOUNT 5
struct IsdnCardState *cs = dev_id;
u_char val;
u_long flags;
int count = 0;
spin_lock_irqsave(&cs->lock, flags);
val = readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[1], HSCX_ISTA);
Start_HSCX:
if (val)
hscx_int_main(cs, val);
val = readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.isac, ISAC_ISTA);
Start_ISAC:
if (val)
isac_interrupt(cs, val);
count++;
val = readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[1], HSCX_ISTA);
if (val && count < MAXCOUNT) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX IntStat after IntRoutine");
goto Start_HSCX;
}
val = readreg(cs->hw.teles3.cfg_reg, cs->hw.teles3.isac, ISAC_ISTA);
if (val && count < MAXCOUNT) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ISAC IntStat after IntRoutine");
goto Start_ISAC;
}
if (count >= MAXCOUNT)
printk(KERN_WARNING "S0Box: more than %d loops in s0box_interrupt\n", count);
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[0], HSCX_MASK, 0xFF);
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[1], HSCX_MASK, 0xFF);
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.isac, ISAC_MASK, 0xFF);
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.isac, ISAC_MASK, 0x0);
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[0], HSCX_MASK, 0x0);
writereg(cs->hw.teles3.cfg_reg, cs->hw.teles3.hscx[1], HSCX_MASK, 0x0);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static void
release_io_s0box(struct IsdnCardState *cs)
{
release_region(cs->hw.teles3.cfg_reg, 8);
}
static int
S0Box_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
u_long flags;
switch (mt) {
case CARD_RESET:
break;
case CARD_RELEASE:
release_io_s0box(cs);
break;
case CARD_INIT:
spin_lock_irqsave(&cs->lock, flags);
inithscxisac(cs, 3);
spin_unlock_irqrestore(&cs->lock, flags);
break;
case CARD_TEST:
break;
}
return (0);
}
int __devinit
setup_s0box(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, s0box_revision);
printk(KERN_INFO "HiSax: S0Box IO driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_S0BOX)
return (0);
cs->hw.teles3.cfg_reg = card->para[1];
cs->hw.teles3.hscx[0] = -0x20;
cs->hw.teles3.hscx[1] = 0x0;
cs->hw.teles3.isac = 0x20;
cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
cs->irq = card->para[0];
if (!request_region(cs->hw.teles3.cfg_reg, 8, "S0Box parallel I/O")) {
printk(KERN_WARNING "HiSax: S0Box ports %x-%x already in use\n",
cs->hw.teles3.cfg_reg,
cs->hw.teles3.cfg_reg + 7);
return 0;
}
printk(KERN_INFO "HiSax: S0Box config irq:%d isac:0x%x cfg:0x%x\n",
cs->irq,
cs->hw.teles3.isac, cs->hw.teles3.cfg_reg);
printk(KERN_INFO "HiSax: hscx A:0x%x hscx B:0x%x\n",
cs->hw.teles3.hscx[0], cs->hw.teles3.hscx[1]);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &S0Box_card_msg;
cs->irq_func = &s0box_interrupt;
ISACVersion(cs, "S0Box:");
if (HscxVersion(cs, "S0Box:")) {
printk(KERN_WARNING
"S0Box: wrong HSCX versions check IO address\n");
release_io_s0box(cs);
return (0);
}
return (1);
}