Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/include/asm-sh/irq.h

58 lines
1.2 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#ifndef __ASM_SH_IRQ_H
#define __ASM_SH_IRQ_H
#include <asm/machvec.h>
sh: NR_IRQS consolidation. Each board sets the total number of IRQs that it's interested in via the machvec. Previously we cared about the off vs on-chip IRQ range, but any code relying on that is long dead. Set NR_IRQS to something sensible given the vector range, and allow boards to cap it if they really care. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-11 23:09:35 -06:00
/*
* A sane default based on a reasonable vector table size, platforms are
* advised to cap this at the hard limit that they're interested in
* through the machvec.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
sh: NR_IRQS consolidation. Each board sets the total number of IRQs that it's interested in via the machvec. Previously we cared about the off vs on-chip IRQ range, but any code relying on that is long dead. Set NR_IRQS to something sensible given the vector range, and allow boards to cap it if they really care. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-11 23:09:35 -06:00
#define NR_IRQS 256
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sh: sh775x/titan fixes for irq header changes. The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-05 20:05:02 -07:00
/*
* Convert back and forth between INTEVT and IRQ values.
*/
sh: Fix bogus regs pointer in do_IRQ(). SH-3 and SH-4 were trampling the register, and SH-2 wasn't even setting it in the first place. This ended up with some rather broken behaviour in the sysrq show_regs(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-13 22:03:35 -06:00
#ifdef CONFIG_CPU_HAS_INTEVT
sh: sh775x/titan fixes for irq header changes. The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-05 20:05:02 -07:00
#define evt2irq(evt) (((evt) >> 5) - 16)
#define irq2evt(irq) (((irq) + 16) << 5)
sh: Fix bogus regs pointer in do_IRQ(). SH-3 and SH-4 were trampling the register, and SH-2 wasn't even setting it in the first place. This ended up with some rather broken behaviour in the sysrq show_regs(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-13 22:03:35 -06:00
#else
#define evt2irq(evt) (evt)
#define irq2evt(irq) (irq)
#endif
sh: sh775x/titan fixes for irq header changes. The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-05 20:05:02 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* Simple Mask Register Support
*/
extern void make_maskreg_irq(unsigned int irq);
extern unsigned short *irq_mask_register;
sh: More cosmetic cleanups and trivial fixes. Nothing exciting here, just trivial fixes.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 02:03:56 -06:00
/*
* PINT IRQs
*/
void init_IRQ_pint(void);
sh: sh775x/titan fixes for irq header changes. The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-05 20:05:02 -07:00
void make_imask_irq(unsigned int irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
static inline int generic_irq_demux(int irq)
{
return irq;
}
#define irq_canonicalize(irq) (irq)
sh: Drop CPU subtype IRQ headers. This drops the various IRQ headers that were floating around and primarily providing hardcoded IRQ definitions for the various CPU subtypes. This quickly got to be an unmaintainable mess, made even more evident by the subtle breakage introduced by the SH-2 and SH-2A changes. Now that subtypes are able to register IRQ maps directly, just rip all of the headers out. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-19 21:55:34 -07:00
#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sh: Decouple 4k and soft/hardirq stacks. While using separate IRQ stacks can cut down on stack consumption, many users can also use 4k stacks directly without the additional need of separate stacks for soft and hardirqs. With this split, we support the same rationale for 4KSTACKS as m68knommu, with the IRQSTACKS abstraction as per ppc64. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-01 21:16:51 -06:00
#ifdef CONFIG_IRQSTACKS
sh: Add support for 4K stacks. This enables support for 4K stacks on SH. Currently this depends on DEBUG_KERNEL, but likely all boards will switch to this as the default in the future. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 03:22:14 -06:00
extern void irq_ctx_init(int cpu);
extern void irq_ctx_exit(int cpu);
# define __ARCH_HAS_DO_SOFTIRQ
#else
# define irq_ctx_init(cpu) do { } while (0)
# define irq_ctx_exit(cpu) do { } while (0)
#endif
sh: asm/irq.h needs asm/cpu/irq.h. The SH-5 build currently fails when trying to build the i8042 code due to the missing IRQ definitions. These are provided in asm/cpu/irq.h, so just include that there to get it building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-13 04:16:47 -07:00
#ifdef CONFIG_CPU_SH5
#include <asm/cpu/irq.h>
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#endif /* __ASM_SH_IRQ_H */
Reference in a new issue Copy permalink