kernel-fxtec-pro1x/mm/quicklist.c

104 lines
2.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 08:07:57 -06:00
// SPDX-License-Identifier: GPL-2.0
Quicklists for page table pages On x86_64 this cuts allocation overhead for page table pages down to a fraction (kernel compile / editing load. TSC based measurement of times spend in each function): no quicklist pte_alloc 1569048 4.3s(401ns/2.7us/179.7us) pmd_alloc 780988 2.1s(337ns/2.7us/86.1us) pud_alloc 780072 2.2s(424ns/2.8us/300.6us) pgd_alloc 260022 1s(920ns/4us/263.1us) quicklist: pte_alloc 452436 573.4ms(8ns/1.3us/121.1us) pmd_alloc 196204 174.5ms(7ns/889ns/46.1us) pud_alloc 195688 172.4ms(7ns/881ns/151.3us) pgd_alloc 65228 9.8ms(8ns/150ns/6.1us) pgd allocations are the most complex and there we see the most dramatic improvement (may be we can cut down the amount of pgds cached somewhat?). But even the pte allocations still see a doubling of performance. 1. Proven code from the IA64 arch. The method used here has been fine tuned for years and is NUMA aware. It is based on the knowledge that accesses to page table pages are sparse in nature. Taking a page off the freelists instead of allocating a zeroed pages allows a reduction of number of cachelines touched in addition to getting rid of the slab overhead. So performance improves. This is particularly useful if pgds contain standard mappings. We can save on the teardown and setup of such a page if we have some on the quicklists. This includes avoiding lists operations that are otherwise necessary on alloc and free to track pgds. 2. Light weight alternative to use slab to manage page size pages Slab overhead is significant and even page allocator use is pretty heavy weight. The use of a per cpu quicklist means that we touch only two cachelines for an allocation. There is no need to access the page_struct (unless arch code needs to fiddle around with it). So the fast past just means bringing in one cacheline at the beginning of the page. That same cacheline may then be used to store the page table entry. Or a second cacheline may be used if the page table entry is not in the first cacheline of the page. The current code will zero the page which means touching 32 cachelines (assuming 128 byte). We get down from 32 to 2 cachelines in the fast path. 3. x86_64 gets lightweight page table page management. This will allow x86_64 arch code to faster repopulate pgds and other page table entries. The list operations for pgds are reduced in the same way as for i386 to the point where a pgd is allocated from the page allocator and when it is freed back to the page allocator. A pgd can pass through the quicklists without having to be reinitialized. 64 Consolidation of code from multiple arches So far arches have their own implementation of quicklist management. This patch moves that feature into the core allowing an easier maintenance and consistent management of quicklists. Page table pages have the characteristics that they are typically zero or in a known state when they are freed. This is usually the exactly same state as needed after allocation. So it makes sense to build a list of freed page table pages and then consume the pages already in use first. Those pages have already been initialized correctly (thus no need to zero them) and are likely already cached in such a way that the MMU can use them most effectively. Page table pages are used in a sparse way so zeroing them on allocation is not too useful. Such an implementation already exits for ia64. Howver, that implementation did not support constructors and destructors as needed by i386 / x86_64. It also only supported a single quicklist. The implementation here has constructor and destructor support as well as the ability for an arch to specify how many quicklists are needed. Quicklists are defined by an arch defining CONFIG_QUICKLIST. If more than one quicklist is necessary then we can define NR_QUICK for additional lists. F.e. i386 needs two and thus has config NR_QUICK int default 2 If an arch has requested quicklist support then pages can be allocated from the quicklist (or from the page allocator if the quicklist is empty) via: quicklist_alloc(<quicklist-nr>, <gfpflags>, <constructor>) Page table pages can be freed using: quicklist_free(<quicklist-nr>, <destructor>, <page>) Pages must have a definite state after allocation and before they are freed. If no constructor is specified then pages will be zeroed on allocation and must be zeroed before they are freed. If a constructor is used then the constructor will establish a definite page state. F.e. the i386 and x86_64 pgd constructors establish certain mappings. Constructors and destructors can also be used to track the pages. i386 and x86_64 use a list of pgds in order to be able to dynamically update standard mappings. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 15:49:50 -06:00
/*
* Quicklist support.
*
* Quicklists are light weight lists of pages that have a defined state
* on alloc and free. Pages must be in the quicklist specific defined state
* (zero by default) when the page is freed. It seems that the initial idea
* for such lists first came from Dave Miller and then various other people
* improved on it.
*
* Copyright (C) 2007 SGI,
* Christoph Lameter <cl@linux.com>
Quicklists for page table pages On x86_64 this cuts allocation overhead for page table pages down to a fraction (kernel compile / editing load. TSC based measurement of times spend in each function): no quicklist pte_alloc 1569048 4.3s(401ns/2.7us/179.7us) pmd_alloc 780988 2.1s(337ns/2.7us/86.1us) pud_alloc 780072 2.2s(424ns/2.8us/300.6us) pgd_alloc 260022 1s(920ns/4us/263.1us) quicklist: pte_alloc 452436 573.4ms(8ns/1.3us/121.1us) pmd_alloc 196204 174.5ms(7ns/889ns/46.1us) pud_alloc 195688 172.4ms(7ns/881ns/151.3us) pgd_alloc 65228 9.8ms(8ns/150ns/6.1us) pgd allocations are the most complex and there we see the most dramatic improvement (may be we can cut down the amount of pgds cached somewhat?). But even the pte allocations still see a doubling of performance. 1. Proven code from the IA64 arch. The method used here has been fine tuned for years and is NUMA aware. It is based on the knowledge that accesses to page table pages are sparse in nature. Taking a page off the freelists instead of allocating a zeroed pages allows a reduction of number of cachelines touched in addition to getting rid of the slab overhead. So performance improves. This is particularly useful if pgds contain standard mappings. We can save on the teardown and setup of such a page if we have some on the quicklists. This includes avoiding lists operations that are otherwise necessary on alloc and free to track pgds. 2. Light weight alternative to use slab to manage page size pages Slab overhead is significant and even page allocator use is pretty heavy weight. The use of a per cpu quicklist means that we touch only two cachelines for an allocation. There is no need to access the page_struct (unless arch code needs to fiddle around with it). So the fast past just means bringing in one cacheline at the beginning of the page. That same cacheline may then be used to store the page table entry. Or a second cacheline may be used if the page table entry is not in the first cacheline of the page. The current code will zero the page which means touching 32 cachelines (assuming 128 byte). We get down from 32 to 2 cachelines in the fast path. 3. x86_64 gets lightweight page table page management. This will allow x86_64 arch code to faster repopulate pgds and other page table entries. The list operations for pgds are reduced in the same way as for i386 to the point where a pgd is allocated from the page allocator and when it is freed back to the page allocator. A pgd can pass through the quicklists without having to be reinitialized. 64 Consolidation of code from multiple arches So far arches have their own implementation of quicklist management. This patch moves that feature into the core allowing an easier maintenance and consistent management of quicklists. Page table pages have the characteristics that they are typically zero or in a known state when they are freed. This is usually the exactly same state as needed after allocation. So it makes sense to build a list of freed page table pages and then consume the pages already in use first. Those pages have already been initialized correctly (thus no need to zero them) and are likely already cached in such a way that the MMU can use them most effectively. Page table pages are used in a sparse way so zeroing them on allocation is not too useful. Such an implementation already exits for ia64. Howver, that implementation did not support constructors and destructors as needed by i386 / x86_64. It also only supported a single quicklist. The implementation here has constructor and destructor support as well as the ability for an arch to specify how many quicklists are needed. Quicklists are defined by an arch defining CONFIG_QUICKLIST. If more than one quicklist is necessary then we can define NR_QUICK for additional lists. F.e. i386 needs two and thus has config NR_QUICK int default 2 If an arch has requested quicklist support then pages can be allocated from the quicklist (or from the page allocator if the quicklist is empty) via: quicklist_alloc(<quicklist-nr>, <gfpflags>, <constructor>) Page table pages can be freed using: quicklist_free(<quicklist-nr>, <destructor>, <page>) Pages must have a definite state after allocation and before they are freed. If no constructor is specified then pages will be zeroed on allocation and must be zeroed before they are freed. If a constructor is used then the constructor will establish a definite page state. F.e. the i386 and x86_64 pgd constructors establish certain mappings. Constructors and destructors can also be used to track the pages. i386 and x86_64 use a list of pgds in order to be able to dynamically update standard mappings. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 15:49:50 -06:00
* Generalized, added support for multiple lists and
* constructors / destructors.
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/gfp.h>
Quicklists for page table pages On x86_64 this cuts allocation overhead for page table pages down to a fraction (kernel compile / editing load. TSC based measurement of times spend in each function): no quicklist pte_alloc 1569048 4.3s(401ns/2.7us/179.7us) pmd_alloc 780988 2.1s(337ns/2.7us/86.1us) pud_alloc 780072 2.2s(424ns/2.8us/300.6us) pgd_alloc 260022 1s(920ns/4us/263.1us) quicklist: pte_alloc 452436 573.4ms(8ns/1.3us/121.1us) pmd_alloc 196204 174.5ms(7ns/889ns/46.1us) pud_alloc 195688 172.4ms(7ns/881ns/151.3us) pgd_alloc 65228 9.8ms(8ns/150ns/6.1us) pgd allocations are the most complex and there we see the most dramatic improvement (may be we can cut down the amount of pgds cached somewhat?). But even the pte allocations still see a doubling of performance. 1. Proven code from the IA64 arch. The method used here has been fine tuned for years and is NUMA aware. It is based on the knowledge that accesses to page table pages are sparse in nature. Taking a page off the freelists instead of allocating a zeroed pages allows a reduction of number of cachelines touched in addition to getting rid of the slab overhead. So performance improves. This is particularly useful if pgds contain standard mappings. We can save on the teardown and setup of such a page if we have some on the quicklists. This includes avoiding lists operations that are otherwise necessary on alloc and free to track pgds. 2. Light weight alternative to use slab to manage page size pages Slab overhead is significant and even page allocator use is pretty heavy weight. The use of a per cpu quicklist means that we touch only two cachelines for an allocation. There is no need to access the page_struct (unless arch code needs to fiddle around with it). So the fast past just means bringing in one cacheline at the beginning of the page. That same cacheline may then be used to store the page table entry. Or a second cacheline may be used if the page table entry is not in the first cacheline of the page. The current code will zero the page which means touching 32 cachelines (assuming 128 byte). We get down from 32 to 2 cachelines in the fast path. 3. x86_64 gets lightweight page table page management. This will allow x86_64 arch code to faster repopulate pgds and other page table entries. The list operations for pgds are reduced in the same way as for i386 to the point where a pgd is allocated from the page allocator and when it is freed back to the page allocator. A pgd can pass through the quicklists without having to be reinitialized. 64 Consolidation of code from multiple arches So far arches have their own implementation of quicklist management. This patch moves that feature into the core allowing an easier maintenance and consistent management of quicklists. Page table pages have the characteristics that they are typically zero or in a known state when they are freed. This is usually the exactly same state as needed after allocation. So it makes sense to build a list of freed page table pages and then consume the pages already in use first. Those pages have already been initialized correctly (thus no need to zero them) and are likely already cached in such a way that the MMU can use them most effectively. Page table pages are used in a sparse way so zeroing them on allocation is not too useful. Such an implementation already exits for ia64. Howver, that implementation did not support constructors and destructors as needed by i386 / x86_64. It also only supported a single quicklist. The implementation here has constructor and destructor support as well as the ability for an arch to specify how many quicklists are needed. Quicklists are defined by an arch defining CONFIG_QUICKLIST. If more than one quicklist is necessary then we can define NR_QUICK for additional lists. F.e. i386 needs two and thus has config NR_QUICK int default 2 If an arch has requested quicklist support then pages can be allocated from the quicklist (or from the page allocator if the quicklist is empty) via: quicklist_alloc(<quicklist-nr>, <gfpflags>, <constructor>) Page table pages can be freed using: quicklist_free(<quicklist-nr>, <destructor>, <page>) Pages must have a definite state after allocation and before they are freed. If no constructor is specified then pages will be zeroed on allocation and must be zeroed before they are freed. If a constructor is used then the constructor will establish a definite page state. F.e. the i386 and x86_64 pgd constructors establish certain mappings. Constructors and destructors can also be used to track the pages. i386 and x86_64 use a list of pgds in order to be able to dynamically update standard mappings. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 15:49:50 -06:00
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/quicklist.h>
DEFINE_PER_CPU(struct quicklist [CONFIG_NR_QUICK], quicklist);
Quicklists for page table pages On x86_64 this cuts allocation overhead for page table pages down to a fraction (kernel compile / editing load. TSC based measurement of times spend in each function): no quicklist pte_alloc 1569048 4.3s(401ns/2.7us/179.7us) pmd_alloc 780988 2.1s(337ns/2.7us/86.1us) pud_alloc 780072 2.2s(424ns/2.8us/300.6us) pgd_alloc 260022 1s(920ns/4us/263.1us) quicklist: pte_alloc 452436 573.4ms(8ns/1.3us/121.1us) pmd_alloc 196204 174.5ms(7ns/889ns/46.1us) pud_alloc 195688 172.4ms(7ns/881ns/151.3us) pgd_alloc 65228 9.8ms(8ns/150ns/6.1us) pgd allocations are the most complex and there we see the most dramatic improvement (may be we can cut down the amount of pgds cached somewhat?). But even the pte allocations still see a doubling of performance. 1. Proven code from the IA64 arch. The method used here has been fine tuned for years and is NUMA aware. It is based on the knowledge that accesses to page table pages are sparse in nature. Taking a page off the freelists instead of allocating a zeroed pages allows a reduction of number of cachelines touched in addition to getting rid of the slab overhead. So performance improves. This is particularly useful if pgds contain standard mappings. We can save on the teardown and setup of such a page if we have some on the quicklists. This includes avoiding lists operations that are otherwise necessary on alloc and free to track pgds. 2. Light weight alternative to use slab to manage page size pages Slab overhead is significant and even page allocator use is pretty heavy weight. The use of a per cpu quicklist means that we touch only two cachelines for an allocation. There is no need to access the page_struct (unless arch code needs to fiddle around with it). So the fast past just means bringing in one cacheline at the beginning of the page. That same cacheline may then be used to store the page table entry. Or a second cacheline may be used if the page table entry is not in the first cacheline of the page. The current code will zero the page which means touching 32 cachelines (assuming 128 byte). We get down from 32 to 2 cachelines in the fast path. 3. x86_64 gets lightweight page table page management. This will allow x86_64 arch code to faster repopulate pgds and other page table entries. The list operations for pgds are reduced in the same way as for i386 to the point where a pgd is allocated from the page allocator and when it is freed back to the page allocator. A pgd can pass through the quicklists without having to be reinitialized. 64 Consolidation of code from multiple arches So far arches have their own implementation of quicklist management. This patch moves that feature into the core allowing an easier maintenance and consistent management of quicklists. Page table pages have the characteristics that they are typically zero or in a known state when they are freed. This is usually the exactly same state as needed after allocation. So it makes sense to build a list of freed page table pages and then consume the pages already in use first. Those pages have already been initialized correctly (thus no need to zero them) and are likely already cached in such a way that the MMU can use them most effectively. Page table pages are used in a sparse way so zeroing them on allocation is not too useful. Such an implementation already exits for ia64. Howver, that implementation did not support constructors and destructors as needed by i386 / x86_64. It also only supported a single quicklist. The implementation here has constructor and destructor support as well as the ability for an arch to specify how many quicklists are needed. Quicklists are defined by an arch defining CONFIG_QUICKLIST. If more than one quicklist is necessary then we can define NR_QUICK for additional lists. F.e. i386 needs two and thus has config NR_QUICK int default 2 If an arch has requested quicklist support then pages can be allocated from the quicklist (or from the page allocator if the quicklist is empty) via: quicklist_alloc(<quicklist-nr>, <gfpflags>, <constructor>) Page table pages can be freed using: quicklist_free(<quicklist-nr>, <destructor>, <page>) Pages must have a definite state after allocation and before they are freed. If no constructor is specified then pages will be zeroed on allocation and must be zeroed before they are freed. If a constructor is used then the constructor will establish a definite page state. F.e. the i386 and x86_64 pgd constructors establish certain mappings. Constructors and destructors can also be used to track the pages. i386 and x86_64 use a list of pgds in order to be able to dynamically update standard mappings. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 15:49:50 -06:00
#define FRACTION_OF_NODE_MEM 16
static unsigned long max_pages(unsigned long min_pages)
{
unsigned long node_free_pages, max;
mm: size of quicklists shouldn't be proportional to the number of CPUs Quicklists store pages for each CPU as caches. (Each CPU can cache node_free_pages/16 pages) It is used for page table cache. exit() will increase the cache size, while fork() consumes it. So for example if an apache-style application runs (one parent and many child model), one CPU process will fork() while another CPU will process the middleware work and exit(). At that time, the CPU on which the parent runs doesn't have page table cache at all. Others (on which children runs) have maximum caches. QList_max = (#ofCPUs - 1) x Free / 16 => QList_max / (Free + QList_max) = (#ofCPUs - 1) / (16 + #ofCPUs - 1) So, How much quicklist memory is used in the maximum case? This is proposional to # of CPUs because the limit of per cpu quicklist cache doesn't see the number of cpus. Above calculation mean Number of CPUs per node 2 4 8 16 ============================== ==================== QList_max / (Free + QList_max) 5.8% 16% 30% 48% Wow! Quicklist can spend about 50% memory at worst case. My demonstration program is here -------------------------------------------------------------------------------- #define _GNU_SOURCE #include <stdio.h> #include <errno.h> #include <stdlib.h> #include <string.h> #include <sched.h> #include <unistd.h> #include <sys/mman.h> #include <sys/wait.h> #define BUFFSIZE 512 int max_cpu(void) /* get max number of logical cpus from /proc/cpuinfo */ { FILE *fd; char *ret, buffer[BUFFSIZE]; int cpu = 1; fd = fopen("/proc/cpuinfo", "r"); if (fd == NULL) { perror("fopen(/proc/cpuinfo)"); exit(EXIT_FAILURE); } while (1) { ret = fgets(buffer, BUFFSIZE, fd); if (ret == NULL) break; if (!strncmp(buffer, "processor", 9)) cpu = atoi(strchr(buffer, ':') + 2); } fclose(fd); return cpu; } void cpu_bind(int cpu) /* bind current process to one cpu */ { cpu_set_t mask; int ret; CPU_ZERO(&mask); CPU_SET(cpu, &mask); ret = sched_setaffinity(0, sizeof(mask), &mask); if (ret == -1) { perror("sched_setaffinity()"); exit(EXIT_FAILURE); } sched_yield(); /* not necessary */ } #define MMAP_SIZE (10 * 1024 * 1024) /* 10 MB */ #define FORK_INTERVAL 1 /* 1 second */ main(int argc, char *argv[]) { int cpu_max, nextcpu; long pagesize; pid_t pid; /* set max number of logical cpu */ if (argc > 1) cpu_max = atoi(argv[1]) - 1; else cpu_max = max_cpu(); /* get the page size */ pagesize = sysconf(_SC_PAGESIZE); if (pagesize == -1) { perror("sysconf(_SC_PAGESIZE)"); exit(EXIT_FAILURE); } /* prepare parent process */ cpu_bind(0); nextcpu = cpu_max; loop: /* select destination cpu for child process by round-robin rule */ if (++nextcpu > cpu_max) nextcpu = 1; pid = fork(); if (pid == 0) { /* child action */ char *p; int i; /* consume page tables */ p = mmap(0, MMAP_SIZE, PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); i = MMAP_SIZE / pagesize; while (i-- > 0) { *p = 1; p += pagesize; } /* move to other cpu */ cpu_bind(nextcpu); /* printf("a child moved to cpu%d after mmap().\n", nextcpu); fflush(stdout); */ /* back page tables to pgtable_quicklist */ exit(0); } else if (pid > 0) { /* parent action */ sleep(FORK_INTERVAL); waitpid(pid, NULL, WNOHANG); } goto loop; } ---------------------------------------- When above program which does task migration runs, my 8GB box spends 800MB of memory for quicklist. This is not memory leak but doesn't seem good. % cat /proc/meminfo MemTotal: 7701568 kB MemFree: 4724672 kB (snip) Quicklists: 844800 kB because - My machine spec is number of numa node: 2 number of cpus: 8 (4CPU x2 node) total mem: 8GB (4GB x2 node) free mem: about 5GB - Then, 4.7GB x 16% ~= 880MB. So, Quicklist can use 800MB. So, if following spec machine run that program CPUs: 64 (8cpu x 8node) Mem: 1TB (128GB x8node) Then, quicklist can waste 300GB (= 1TB x 30%). It is too large. So, I don't like cache policies which is proportional to # of cpus. My patch changes the number of caches from: per-cpu-cache-amount = memory_on_node / 16 to per-cpu-cache-amount = memory_on_node / 16 / number_of_cpus_on_node. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Tested-by: David Miller <davem@davemloft.net> Acked-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02 15:35:58 -06:00
int node = numa_node_id();
struct zone *zones = NODE_DATA(node)->node_zones;
int num_cpus_on_node;
node_free_pages =
#ifdef CONFIG_ZONE_DMA
zone_page_state(&zones[ZONE_DMA], NR_FREE_PAGES) +
#endif
#ifdef CONFIG_ZONE_DMA32
zone_page_state(&zones[ZONE_DMA32], NR_FREE_PAGES) +
#endif
zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
Quicklists for page table pages On x86_64 this cuts allocation overhead for page table pages down to a fraction (kernel compile / editing load. TSC based measurement of times spend in each function): no quicklist pte_alloc 1569048 4.3s(401ns/2.7us/179.7us) pmd_alloc 780988 2.1s(337ns/2.7us/86.1us) pud_alloc 780072 2.2s(424ns/2.8us/300.6us) pgd_alloc 260022 1s(920ns/4us/263.1us) quicklist: pte_alloc 452436 573.4ms(8ns/1.3us/121.1us) pmd_alloc 196204 174.5ms(7ns/889ns/46.1us) pud_alloc 195688 172.4ms(7ns/881ns/151.3us) pgd_alloc 65228 9.8ms(8ns/150ns/6.1us) pgd allocations are the most complex and there we see the most dramatic improvement (may be we can cut down the amount of pgds cached somewhat?). But even the pte allocations still see a doubling of performance. 1. Proven code from the IA64 arch. The method used here has been fine tuned for years and is NUMA aware. It is based on the knowledge that accesses to page table pages are sparse in nature. Taking a page off the freelists instead of allocating a zeroed pages allows a reduction of number of cachelines touched in addition to getting rid of the slab overhead. So performance improves. This is particularly useful if pgds contain standard mappings. We can save on the teardown and setup of such a page if we have some on the quicklists. This includes avoiding lists operations that are otherwise necessary on alloc and free to track pgds. 2. Light weight alternative to use slab to manage page size pages Slab overhead is significant and even page allocator use is pretty heavy weight. The use of a per cpu quicklist means that we touch only two cachelines for an allocation. There is no need to access the page_struct (unless arch code needs to fiddle around with it). So the fast past just means bringing in one cacheline at the beginning of the page. That same cacheline may then be used to store the page table entry. Or a second cacheline may be used if the page table entry is not in the first cacheline of the page. The current code will zero the page which means touching 32 cachelines (assuming 128 byte). We get down from 32 to 2 cachelines in the fast path. 3. x86_64 gets lightweight page table page management. This will allow x86_64 arch code to faster repopulate pgds and other page table entries. The list operations for pgds are reduced in the same way as for i386 to the point where a pgd is allocated from the page allocator and when it is freed back to the page allocator. A pgd can pass through the quicklists without having to be reinitialized. 64 Consolidation of code from multiple arches So far arches have their own implementation of quicklist management. This patch moves that feature into the core allowing an easier maintenance and consistent management of quicklists. Page table pages have the characteristics that they are typically zero or in a known state when they are freed. This is usually the exactly same state as needed after allocation. So it makes sense to build a list of freed page table pages and then consume the pages already in use first. Those pages have already been initialized correctly (thus no need to zero them) and are likely already cached in such a way that the MMU can use them most effectively. Page table pages are used in a sparse way so zeroing them on allocation is not too useful. Such an implementation already exits for ia64. Howver, that implementation did not support constructors and destructors as needed by i386 / x86_64. It also only supported a single quicklist. The implementation here has constructor and destructor support as well as the ability for an arch to specify how many quicklists are needed. Quicklists are defined by an arch defining CONFIG_QUICKLIST. If more than one quicklist is necessary then we can define NR_QUICK for additional lists. F.e. i386 needs two and thus has config NR_QUICK int default 2 If an arch has requested quicklist support then pages can be allocated from the quicklist (or from the page allocator if the quicklist is empty) via: quicklist_alloc(<quicklist-nr>, <gfpflags>, <constructor>) Page table pages can be freed using: quicklist_free(<quicklist-nr>, <destructor>, <page>) Pages must have a definite state after allocation and before they are freed. If no constructor is specified then pages will be zeroed on allocation and must be zeroed before they are freed. If a constructor is used then the constructor will establish a definite page state. F.e. the i386 and x86_64 pgd constructors establish certain mappings. Constructors and destructors can also be used to track the pages. i386 and x86_64 use a list of pgds in order to be able to dynamically update standard mappings. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 15:49:50 -06:00
max = node_free_pages / FRACTION_OF_NODE_MEM;
mm: size of quicklists shouldn't be proportional to the number of CPUs Quicklists store pages for each CPU as caches. (Each CPU can cache node_free_pages/16 pages) It is used for page table cache. exit() will increase the cache size, while fork() consumes it. So for example if an apache-style application runs (one parent and many child model), one CPU process will fork() while another CPU will process the middleware work and exit(). At that time, the CPU on which the parent runs doesn't have page table cache at all. Others (on which children runs) have maximum caches. QList_max = (#ofCPUs - 1) x Free / 16 => QList_max / (Free + QList_max) = (#ofCPUs - 1) / (16 + #ofCPUs - 1) So, How much quicklist memory is used in the maximum case? This is proposional to # of CPUs because the limit of per cpu quicklist cache doesn't see the number of cpus. Above calculation mean Number of CPUs per node 2 4 8 16 ============================== ==================== QList_max / (Free + QList_max) 5.8% 16% 30% 48% Wow! Quicklist can spend about 50% memory at worst case. My demonstration program is here -------------------------------------------------------------------------------- #define _GNU_SOURCE #include <stdio.h> #include <errno.h> #include <stdlib.h> #include <string.h> #include <sched.h> #include <unistd.h> #include <sys/mman.h> #include <sys/wait.h> #define BUFFSIZE 512 int max_cpu(void) /* get max number of logical cpus from /proc/cpuinfo */ { FILE *fd; char *ret, buffer[BUFFSIZE]; int cpu = 1; fd = fopen("/proc/cpuinfo", "r"); if (fd == NULL) { perror("fopen(/proc/cpuinfo)"); exit(EXIT_FAILURE); } while (1) { ret = fgets(buffer, BUFFSIZE, fd); if (ret == NULL) break; if (!strncmp(buffer, "processor", 9)) cpu = atoi(strchr(buffer, ':') + 2); } fclose(fd); return cpu; } void cpu_bind(int cpu) /* bind current process to one cpu */ { cpu_set_t mask; int ret; CPU_ZERO(&mask); CPU_SET(cpu, &mask); ret = sched_setaffinity(0, sizeof(mask), &mask); if (ret == -1) { perror("sched_setaffinity()"); exit(EXIT_FAILURE); } sched_yield(); /* not necessary */ } #define MMAP_SIZE (10 * 1024 * 1024) /* 10 MB */ #define FORK_INTERVAL 1 /* 1 second */ main(int argc, char *argv[]) { int cpu_max, nextcpu; long pagesize; pid_t pid; /* set max number of logical cpu */ if (argc > 1) cpu_max = atoi(argv[1]) - 1; else cpu_max = max_cpu(); /* get the page size */ pagesize = sysconf(_SC_PAGESIZE); if (pagesize == -1) { perror("sysconf(_SC_PAGESIZE)"); exit(EXIT_FAILURE); } /* prepare parent process */ cpu_bind(0); nextcpu = cpu_max; loop: /* select destination cpu for child process by round-robin rule */ if (++nextcpu > cpu_max) nextcpu = 1; pid = fork(); if (pid == 0) { /* child action */ char *p; int i; /* consume page tables */ p = mmap(0, MMAP_SIZE, PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); i = MMAP_SIZE / pagesize; while (i-- > 0) { *p = 1; p += pagesize; } /* move to other cpu */ cpu_bind(nextcpu); /* printf("a child moved to cpu%d after mmap().\n", nextcpu); fflush(stdout); */ /* back page tables to pgtable_quicklist */ exit(0); } else if (pid > 0) { /* parent action */ sleep(FORK_INTERVAL); waitpid(pid, NULL, WNOHANG); } goto loop; } ---------------------------------------- When above program which does task migration runs, my 8GB box spends 800MB of memory for quicklist. This is not memory leak but doesn't seem good. % cat /proc/meminfo MemTotal: 7701568 kB MemFree: 4724672 kB (snip) Quicklists: 844800 kB because - My machine spec is number of numa node: 2 number of cpus: 8 (4CPU x2 node) total mem: 8GB (4GB x2 node) free mem: about 5GB - Then, 4.7GB x 16% ~= 880MB. So, Quicklist can use 800MB. So, if following spec machine run that program CPUs: 64 (8cpu x 8node) Mem: 1TB (128GB x8node) Then, quicklist can waste 300GB (= 1TB x 30%). It is too large. So, I don't like cache policies which is proportional to # of cpus. My patch changes the number of caches from: per-cpu-cache-amount = memory_on_node / 16 to per-cpu-cache-amount = memory_on_node / 16 / number_of_cpus_on_node. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Tested-by: David Miller <davem@davemloft.net> Acked-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02 15:35:58 -06:00
num_cpus_on_node = cpumask_weight(cpumask_of_node(node));
mm: size of quicklists shouldn't be proportional to the number of CPUs Quicklists store pages for each CPU as caches. (Each CPU can cache node_free_pages/16 pages) It is used for page table cache. exit() will increase the cache size, while fork() consumes it. So for example if an apache-style application runs (one parent and many child model), one CPU process will fork() while another CPU will process the middleware work and exit(). At that time, the CPU on which the parent runs doesn't have page table cache at all. Others (on which children runs) have maximum caches. QList_max = (#ofCPUs - 1) x Free / 16 => QList_max / (Free + QList_max) = (#ofCPUs - 1) / (16 + #ofCPUs - 1) So, How much quicklist memory is used in the maximum case? This is proposional to # of CPUs because the limit of per cpu quicklist cache doesn't see the number of cpus. Above calculation mean Number of CPUs per node 2 4 8 16 ============================== ==================== QList_max / (Free + QList_max) 5.8% 16% 30% 48% Wow! Quicklist can spend about 50% memory at worst case. My demonstration program is here -------------------------------------------------------------------------------- #define _GNU_SOURCE #include <stdio.h> #include <errno.h> #include <stdlib.h> #include <string.h> #include <sched.h> #include <unistd.h> #include <sys/mman.h> #include <sys/wait.h> #define BUFFSIZE 512 int max_cpu(void) /* get max number of logical cpus from /proc/cpuinfo */ { FILE *fd; char *ret, buffer[BUFFSIZE]; int cpu = 1; fd = fopen("/proc/cpuinfo", "r"); if (fd == NULL) { perror("fopen(/proc/cpuinfo)"); exit(EXIT_FAILURE); } while (1) { ret = fgets(buffer, BUFFSIZE, fd); if (ret == NULL) break; if (!strncmp(buffer, "processor", 9)) cpu = atoi(strchr(buffer, ':') + 2); } fclose(fd); return cpu; } void cpu_bind(int cpu) /* bind current process to one cpu */ { cpu_set_t mask; int ret; CPU_ZERO(&mask); CPU_SET(cpu, &mask); ret = sched_setaffinity(0, sizeof(mask), &mask); if (ret == -1) { perror("sched_setaffinity()"); exit(EXIT_FAILURE); } sched_yield(); /* not necessary */ } #define MMAP_SIZE (10 * 1024 * 1024) /* 10 MB */ #define FORK_INTERVAL 1 /* 1 second */ main(int argc, char *argv[]) { int cpu_max, nextcpu; long pagesize; pid_t pid; /* set max number of logical cpu */ if (argc > 1) cpu_max = atoi(argv[1]) - 1; else cpu_max = max_cpu(); /* get the page size */ pagesize = sysconf(_SC_PAGESIZE); if (pagesize == -1) { perror("sysconf(_SC_PAGESIZE)"); exit(EXIT_FAILURE); } /* prepare parent process */ cpu_bind(0); nextcpu = cpu_max; loop: /* select destination cpu for child process by round-robin rule */ if (++nextcpu > cpu_max) nextcpu = 1; pid = fork(); if (pid == 0) { /* child action */ char *p; int i; /* consume page tables */ p = mmap(0, MMAP_SIZE, PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); i = MMAP_SIZE / pagesize; while (i-- > 0) { *p = 1; p += pagesize; } /* move to other cpu */ cpu_bind(nextcpu); /* printf("a child moved to cpu%d after mmap().\n", nextcpu); fflush(stdout); */ /* back page tables to pgtable_quicklist */ exit(0); } else if (pid > 0) { /* parent action */ sleep(FORK_INTERVAL); waitpid(pid, NULL, WNOHANG); } goto loop; } ---------------------------------------- When above program which does task migration runs, my 8GB box spends 800MB of memory for quicklist. This is not memory leak but doesn't seem good. % cat /proc/meminfo MemTotal: 7701568 kB MemFree: 4724672 kB (snip) Quicklists: 844800 kB because - My machine spec is number of numa node: 2 number of cpus: 8 (4CPU x2 node) total mem: 8GB (4GB x2 node) free mem: about 5GB - Then, 4.7GB x 16% ~= 880MB. So, Quicklist can use 800MB. So, if following spec machine run that program CPUs: 64 (8cpu x 8node) Mem: 1TB (128GB x8node) Then, quicklist can waste 300GB (= 1TB x 30%). It is too large. So, I don't like cache policies which is proportional to # of cpus. My patch changes the number of caches from: per-cpu-cache-amount = memory_on_node / 16 to per-cpu-cache-amount = memory_on_node / 16 / number_of_cpus_on_node. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Tested-by: David Miller <davem@davemloft.net> Acked-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02 15:35:58 -06:00
max /= num_cpus_on_node;
Quicklists for page table pages On x86_64 this cuts allocation overhead for page table pages down to a fraction (kernel compile / editing load. TSC based measurement of times spend in each function): no quicklist pte_alloc 1569048 4.3s(401ns/2.7us/179.7us) pmd_alloc 780988 2.1s(337ns/2.7us/86.1us) pud_alloc 780072 2.2s(424ns/2.8us/300.6us) pgd_alloc 260022 1s(920ns/4us/263.1us) quicklist: pte_alloc 452436 573.4ms(8ns/1.3us/121.1us) pmd_alloc 196204 174.5ms(7ns/889ns/46.1us) pud_alloc 195688 172.4ms(7ns/881ns/151.3us) pgd_alloc 65228 9.8ms(8ns/150ns/6.1us) pgd allocations are the most complex and there we see the most dramatic improvement (may be we can cut down the amount of pgds cached somewhat?). But even the pte allocations still see a doubling of performance. 1. Proven code from the IA64 arch. The method used here has been fine tuned for years and is NUMA aware. It is based on the knowledge that accesses to page table pages are sparse in nature. Taking a page off the freelists instead of allocating a zeroed pages allows a reduction of number of cachelines touched in addition to getting rid of the slab overhead. So performance improves. This is particularly useful if pgds contain standard mappings. We can save on the teardown and setup of such a page if we have some on the quicklists. This includes avoiding lists operations that are otherwise necessary on alloc and free to track pgds. 2. Light weight alternative to use slab to manage page size pages Slab overhead is significant and even page allocator use is pretty heavy weight. The use of a per cpu quicklist means that we touch only two cachelines for an allocation. There is no need to access the page_struct (unless arch code needs to fiddle around with it). So the fast past just means bringing in one cacheline at the beginning of the page. That same cacheline may then be used to store the page table entry. Or a second cacheline may be used if the page table entry is not in the first cacheline of the page. The current code will zero the page which means touching 32 cachelines (assuming 128 byte). We get down from 32 to 2 cachelines in the fast path. 3. x86_64 gets lightweight page table page management. This will allow x86_64 arch code to faster repopulate pgds and other page table entries. The list operations for pgds are reduced in the same way as for i386 to the point where a pgd is allocated from the page allocator and when it is freed back to the page allocator. A pgd can pass through the quicklists without having to be reinitialized. 64 Consolidation of code from multiple arches So far arches have their own implementation of quicklist management. This patch moves that feature into the core allowing an easier maintenance and consistent management of quicklists. Page table pages have the characteristics that they are typically zero or in a known state when they are freed. This is usually the exactly same state as needed after allocation. So it makes sense to build a list of freed page table pages and then consume the pages already in use first. Those pages have already been initialized correctly (thus no need to zero them) and are likely already cached in such a way that the MMU can use them most effectively. Page table pages are used in a sparse way so zeroing them on allocation is not too useful. Such an implementation already exits for ia64. Howver, that implementation did not support constructors and destructors as needed by i386 / x86_64. It also only supported a single quicklist. The implementation here has constructor and destructor support as well as the ability for an arch to specify how many quicklists are needed. Quicklists are defined by an arch defining CONFIG_QUICKLIST. If more than one quicklist is necessary then we can define NR_QUICK for additional lists. F.e. i386 needs two and thus has config NR_QUICK int default 2 If an arch has requested quicklist support then pages can be allocated from the quicklist (or from the page allocator if the quicklist is empty) via: quicklist_alloc(<quicklist-nr>, <gfpflags>, <constructor>) Page table pages can be freed using: quicklist_free(<quicklist-nr>, <destructor>, <page>) Pages must have a definite state after allocation and before they are freed. If no constructor is specified then pages will be zeroed on allocation and must be zeroed before they are freed. If a constructor is used then the constructor will establish a definite page state. F.e. the i386 and x86_64 pgd constructors establish certain mappings. Constructors and destructors can also be used to track the pages. i386 and x86_64 use a list of pgds in order to be able to dynamically update standard mappings. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 15:49:50 -06:00
return max(max, min_pages);
}
static long min_pages_to_free(struct quicklist *q,
unsigned long min_pages, long max_free)
{
long pages_to_free;
pages_to_free = q->nr_pages - max_pages(min_pages);
return min(pages_to_free, max_free);
}
/*
* Trim down the number of pages in the quicklist
*/
void quicklist_trim(int nr, void (*dtor)(void *),
unsigned long min_pages, unsigned long max_free)
{
long pages_to_free;
struct quicklist *q;
q = &get_cpu_var(quicklist)[nr];
if (q->nr_pages > min_pages) {
pages_to_free = min_pages_to_free(q, min_pages, max_free);
while (pages_to_free > 0) {
/*
* We pass a gfp_t of 0 to quicklist_alloc here
* because we will never call into the page allocator.
*/
void *p = quicklist_alloc(nr, 0, NULL);
if (dtor)
dtor(p);
free_page((unsigned long)p);
pages_to_free--;
}
}
put_cpu_var(quicklist);
}
unsigned long quicklist_total_size(void)
{
unsigned long count = 0;
int cpu;
struct quicklist *ql, *q;
for_each_online_cpu(cpu) {
ql = per_cpu(quicklist, cpu);
for (q = ql; q < ql + CONFIG_NR_QUICK; q++)
count += q->nr_pages;
}
return count;
}