kernel-fxtec-pro1x/arch/x86/kernel/process_32.c

731 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (C) 1995 Linus Torvalds
*
* Pentium III FXSR, SSE support
* Gareth Hughes <gareth@valinux.com>, May 2000
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <stdarg.h>
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/elfcore.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/utsname.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/mc146818rtc.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/ptrace.h>
#include <linux/random.h>
#include <linux/personality.h>
#include <linux/tick.h>
#include <linux/percpu.h>
#include <linux/prctl.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/desc.h>
#ifdef CONFIG_MATH_EMULATION
#include <asm/math_emu.h>
#endif
#include <linux/err.h>
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
#include <asm/tlbflush.h>
#include <asm/cpu.h>
#include <asm/kdebug.h>
#include <asm/syscalls.h>
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
EXPORT_PER_CPU_SYMBOL(current_task);
DEFINE_PER_CPU(int, cpu_number);
EXPORT_PER_CPU_SYMBOL(cpu_number);
/*
* Return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
return ((unsigned long *)tsk->thread.sp)[3];
}
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
#ifdef CONFIG_HOTPLUG_CPU
#include <asm/nmi.h>
static void cpu_exit_clear(void)
{
int cpu = raw_smp_processor_id();
idle_task_exit();
cpu_uninit();
irq_ctx_exit(cpu);
cpu_clear(cpu, cpu_callout_map);
cpu_clear(cpu, cpu_callin_map);
numa_remove_cpu(cpu);
}
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
/* We don't actually take CPU down, just spin without interrupts. */
static inline void play_dead(void)
{
/* This must be done before dead CPU ack */
cpu_exit_clear();
wbinvd();
mb();
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
/*
* With physical CPU hotplug, we should halt the cpu
*/
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
local_irq_disable();
while (1)
halt();
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
}
#else
static inline void play_dead(void)
{
BUG();
}
#endif /* CONFIG_HOTPLUG_CPU */
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
void cpu_idle(void)
{
int cpu = smp_processor_id();
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
current_thread_info()->status |= TS_POLLING;
[PATCH] sched: resched and cpu_idle rework Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 22:39:04 -07:00
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_stop_sched_tick();
while (!need_resched()) {
check_pgt_cache();
rmb();
if (rcu_pending(cpu))
rcu_check_callbacks(cpu, 0);
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 15:54:50 -06:00
if (cpu_is_offline(cpu))
play_dead();
local_irq_disable();
__get_cpu_var(irq_stat).idle_timestamp = jiffies;
/* Don't trace irqs off for idle */
stop_critical_timings();
pm_idle();
start_critical_timings();
}
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
void __show_registers(struct pt_regs *regs, int all)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
unsigned long d0, d1, d2, d3, d6, d7;
unsigned long sp;
unsigned short ss, gs;
if (user_mode_vm(regs)) {
sp = regs->sp;
ss = regs->ss & 0xffff;
savesegment(gs, gs);
} else {
sp = (unsigned long) (&regs->sp);
savesegment(ss, ss);
savesegment(gs, gs);
}
printk("\n");
printk("Pid: %d, comm: %s %s (%s %.*s)\n",
task_pid_nr(current), current->comm,
print_tainted(), init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
(u16)regs->cs, regs->ip, regs->flags,
smp_processor_id());
print_symbol("EIP is at %s\n", regs->ip);
printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
regs->ax, regs->bx, regs->cx, regs->dx);
printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
regs->si, regs->di, regs->bp, sp);
printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
(u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
if (!all)
return;
cr0 = read_cr0();
cr2 = read_cr2();
cr3 = read_cr3();
cr4 = read_cr4_safe();
printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
cr0, cr2, cr3, cr4);
get_debugreg(d0, 0);
get_debugreg(d1, 1);
get_debugreg(d2, 2);
get_debugreg(d3, 3);
printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
d0, d1, d2, d3);
get_debugreg(d6, 6);
get_debugreg(d7, 7);
printk("DR6: %08lx DR7: %08lx\n",
d6, d7);
}
void show_regs(struct pt_regs *regs)
{
__show_registers(regs, 1);
show_trace(NULL, regs, &regs->sp, regs->bp);
}
/*
* This gets run with %bx containing the
* function to call, and %dx containing
* the "args".
*/
extern void kernel_thread_helper(void);
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
struct pt_regs regs;
memset(&regs, 0, sizeof(regs));
regs.bx = (unsigned long) fn;
regs.dx = (unsigned long) arg;
regs.ds = __USER_DS;
regs.es = __USER_DS;
regs.fs = __KERNEL_PERCPU;
regs.orig_ax = -1;
regs.ip = (unsigned long) kernel_thread_helper;
regs.cs = __KERNEL_CS | get_kernel_rpl();
regs.flags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2;
/* Ok, create the new process.. */
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
}
EXPORT_SYMBOL(kernel_thread);
/*
* Free current thread data structures etc..
*/
void exit_thread(void)
{
/* The process may have allocated an io port bitmap... nuke it. */
if (unlikely(test_thread_flag(TIF_IO_BITMAP))) {
struct task_struct *tsk = current;
struct thread_struct *t = &tsk->thread;
int cpu = get_cpu();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
kfree(t->io_bitmap_ptr);
t->io_bitmap_ptr = NULL;
clear_thread_flag(TIF_IO_BITMAP);
/*
* Careful, clear this in the TSS too:
*/
memset(tss->io_bitmap, 0xff, tss->io_bitmap_max);
t->io_bitmap_max = 0;
tss->io_bitmap_owner = NULL;
tss->io_bitmap_max = 0;
tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
put_cpu();
}
}
void flush_thread(void)
{
struct task_struct *tsk = current;
tsk->thread.debugreg0 = 0;
tsk->thread.debugreg1 = 0;
tsk->thread.debugreg2 = 0;
tsk->thread.debugreg3 = 0;
tsk->thread.debugreg6 = 0;
tsk->thread.debugreg7 = 0;
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
clear_tsk_thread_flag(tsk, TIF_DEBUG);
/*
* Forget coprocessor state..
*/
x86: fix NULL pointer deref in __switch_to Patrick McHardy reported a crash: > > I get this oops once a day, its apparently triggered by something > > run by cron, but the process is a different one each time. > > > > Kernel is -git from yesterday shortly before the -rc6 release > > (last commit is the usb-2.6 merge, the x86 patches are missing), > > .config is attached. > > > > I'll retry with current -git, but the patches that have gone in > > since I last updated don't look related. > > > > [62060.043009] BUG: unable to handle kernel NULL pointer dereference at > > 000001ff > > [62060.043009] IP: [<c0102a9b>] __switch_to+0x2f/0x118 > > [62060.043009] *pde = 00000000 > > [62060.043009] Oops: 0002 [#1] PREEMPT Vegard Nossum analyzed it: > This decodes to > > 0: 0f ae 00 fxsave (%eax) > > so it's related to the floating-point context. This is the exact > location of the crash: > > $ addr2line -e arch/x86/kernel/process_32.o -i ab0 > include/asm/i387.h:232 > include/asm/i387.h:262 > arch/x86/kernel/process_32.c:595 > > ...so it looks like prev_task->thread.xstate->fxsave has become NULL. > Or maybe it never had any other value. Somehow (as described below) TS_USEDFPU is set but the fpu is not allocated or freed. Another possible FPU pre-emption issue with the sleazy FPU optimization which was benign before but not so anymore, with the dynamic FPU allocation patch. New task is getting exec'd and it is prempted at the below point. flush_thread() { ... /* * Forget coprocessor state.. */ clear_fpu(tsk); <----- Preemption point clear_used_math(); ... } Now when it context switches in again, as the used_math() is still set and fpu_counter can be > 5, we will do a math_state_restore() which sets the task's TS_USEDFPU. After it continues from the above preemption point it does clear_used_math() and much later free_thread_xstate(). Now, at the next context switch, it is quite possible that xstate is null, used_math() is not set and TS_USEDFPU is still set. This will trigger unlazy_fpu() causing kernel oops. Fix this by clearing tsk's fpu_counter before clearing task's fpu. Reported-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-13 16:47:12 -06:00
tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
void release_thread(struct task_struct *dead_task)
{
BUG_ON(dead_task->mm);
release_vm86_irqs(dead_task);
}
/*
* This gets called before we allocate a new thread and copy
* the current task into it.
*/
void prepare_to_copy(struct task_struct *tsk)
{
unlazy_fpu(tsk);
}
int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
unsigned long unused,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct task_struct *tsk;
int err;
childregs = task_pt_regs(p);
[PATCH] x86 stack initialisation fix The recent change fix-crash-in-entrys-restore_all.patch childregs->esp = esp; p->thread.esp = (unsigned long) childregs; - p->thread.esp0 = (unsigned long) (childregs+1); + p->thread.esp0 = (unsigned long) (childregs+1) - 8; p->thread.eip = (unsigned long) ret_from_fork; introduces an inconsistency between esp and esp0 before the task is run the first time. esp0 is no longer the actual start of the stack, but 8 bytes off. This shows itself clearly in a scenario when a ptracer that is set to also ptrace eventual children traces program1 which then clones thread1. Now the ptracer wants to modify the registers of thread1. The x86 ptrace implementation bases it's knowledge about saved user-space registers upon p->thread.esp0. But this will be a few bytes off causing certain writes to the kernel stack to overwrite a saved kernel function address making the kernel when actually running thread1 jump out into user-space. Very spectacular. The testcase I've used is: /* start with strace -f ./a.out */ #include <pthread.h> #include <stdio.h> void *do_thread(void *p) { for (;;); } int main() { pthread_t one; pthread_create(&one, NULL, &do_thread, NULL); for (;;); return 0; } So, my solution is to instead of just adjusting esp0 that creates an inconsitent state I adjust where the user-space registers are saved with -8 bytes. This gives us the wanted extra bytes on the start of the stack and esp0 is now correct. This solves the issues I saw from the original testcase from Mateusz Berezecki and has survived testing here. I think this should go into -mm a round or two first however as there might be some cruft around depending on pt_regs lying on the start of the stack. That however would have broken with the first change too! It's actually a 2-line diff but I had to move the comment of why the -8 bytes are there a few lines up. Thanks to Zwane for helping me with this. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 17:15:03 -06:00
*childregs = *regs;
childregs->ax = 0;
childregs->sp = sp;
[PATCH] x86 stack initialisation fix The recent change fix-crash-in-entrys-restore_all.patch childregs->esp = esp; p->thread.esp = (unsigned long) childregs; - p->thread.esp0 = (unsigned long) (childregs+1); + p->thread.esp0 = (unsigned long) (childregs+1) - 8; p->thread.eip = (unsigned long) ret_from_fork; introduces an inconsistency between esp and esp0 before the task is run the first time. esp0 is no longer the actual start of the stack, but 8 bytes off. This shows itself clearly in a scenario when a ptracer that is set to also ptrace eventual children traces program1 which then clones thread1. Now the ptracer wants to modify the registers of thread1. The x86 ptrace implementation bases it's knowledge about saved user-space registers upon p->thread.esp0. But this will be a few bytes off causing certain writes to the kernel stack to overwrite a saved kernel function address making the kernel when actually running thread1 jump out into user-space. Very spectacular. The testcase I've used is: /* start with strace -f ./a.out */ #include <pthread.h> #include <stdio.h> void *do_thread(void *p) { for (;;); } int main() { pthread_t one; pthread_create(&one, NULL, &do_thread, NULL); for (;;); return 0; } So, my solution is to instead of just adjusting esp0 that creates an inconsitent state I adjust where the user-space registers are saved with -8 bytes. This gives us the wanted extra bytes on the start of the stack and esp0 is now correct. This solves the issues I saw from the original testcase from Mateusz Berezecki and has survived testing here. I think this should go into -mm a round or two first however as there might be some cruft around depending on pt_regs lying on the start of the stack. That however would have broken with the first change too! It's actually a 2-line diff but I had to move the comment of why the -8 bytes are there a few lines up. Thanks to Zwane for helping me with this. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 17:15:03 -06:00
p->thread.sp = (unsigned long) childregs;
p->thread.sp0 = (unsigned long) (childregs+1);
p->thread.ip = (unsigned long) ret_from_fork;
savesegment(gs, p->thread.gs);
tsk = current;
if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
IO_BITMAP_BYTES, GFP_KERNEL);
if (!p->thread.io_bitmap_ptr) {
p->thread.io_bitmap_max = 0;
return -ENOMEM;
}
set_tsk_thread_flag(p, TIF_IO_BITMAP);
}
err = 0;
/*
* Set a new TLS for the child thread?
*/
if (clone_flags & CLONE_SETTLS)
err = do_set_thread_area(p, -1,
(struct user_desc __user *)childregs->si, 0);
if (err && p->thread.io_bitmap_ptr) {
kfree(p->thread.io_bitmap_ptr);
p->thread.io_bitmap_max = 0;
}
return err;
}
void
start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
{
__asm__("movl %0, %%gs" :: "r"(0));
regs->fs = 0;
set_fs(USER_DS);
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
regs->ip = new_ip;
regs->sp = new_sp;
/*
* Free the old FP and other extended state
*/
free_thread_xstate(current);
}
EXPORT_SYMBOL_GPL(start_thread);
static void hard_disable_TSC(void)
{
write_cr4(read_cr4() | X86_CR4_TSD);
}
void disable_TSC(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
hard_disable_TSC();
preempt_enable();
}
static void hard_enable_TSC(void)
{
write_cr4(read_cr4() & ~X86_CR4_TSD);
}
static void enable_TSC(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
hard_enable_TSC();
preempt_enable();
}
int get_tsc_mode(unsigned long adr)
{
unsigned int val;
if (test_thread_flag(TIF_NOTSC))
val = PR_TSC_SIGSEGV;
else
val = PR_TSC_ENABLE;
return put_user(val, (unsigned int __user *)adr);
}
int set_tsc_mode(unsigned int val)
{
if (val == PR_TSC_SIGSEGV)
disable_TSC();
else if (val == PR_TSC_ENABLE)
enable_TSC();
else
return -EINVAL;
return 0;
}
static noinline void
__switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
struct tss_struct *tss)
{
struct thread_struct *prev, *next;
unsigned long debugctl;
prev = &prev_p->thread;
next = &next_p->thread;
debugctl = prev->debugctlmsr;
if (next->ds_area_msr != prev->ds_area_msr) {
/* we clear debugctl to make sure DS
* is not in use when we change it */
debugctl = 0;
update_debugctlmsr(0);
wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0);
}
if (next->debugctlmsr != debugctl)
update_debugctlmsr(next->debugctlmsr);
if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
set_debugreg(next->debugreg0, 0);
set_debugreg(next->debugreg1, 1);
set_debugreg(next->debugreg2, 2);
set_debugreg(next->debugreg3, 3);
/* no 4 and 5 */
set_debugreg(next->debugreg6, 6);
set_debugreg(next->debugreg7, 7);
}
if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
test_tsk_thread_flag(next_p, TIF_NOTSC)) {
/* prev and next are different */
if (test_tsk_thread_flag(next_p, TIF_NOTSC))
hard_disable_TSC();
else
hard_enable_TSC();
}
#ifdef X86_BTS
if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
#endif
if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
/*
* Disable the bitmap via an invalid offset. We still cache
* the previous bitmap owner and the IO bitmap contents:
*/
tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
return;
}
if (likely(next == tss->io_bitmap_owner)) {
/*
* Previous owner of the bitmap (hence the bitmap content)
* matches the next task, we dont have to do anything but
* to set a valid offset in the TSS:
*/
tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
return;
}
/*
* Lazy TSS's I/O bitmap copy. We set an invalid offset here
* and we let the task to get a GPF in case an I/O instruction
* is performed. The handler of the GPF will verify that the
* faulting task has a valid I/O bitmap and, it true, does the
* real copy and restart the instruction. This will save us
* redundant copies when the currently switched task does not
* perform any I/O during its timeslice.
*/
tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
}
/*
* switch_to(x,yn) should switch tasks from x to y.
*
* We fsave/fwait so that an exception goes off at the right time
* (as a call from the fsave or fwait in effect) rather than to
* the wrong process. Lazy FP saving no longer makes any sense
* with modern CPU's, and this simplifies a lot of things (SMP
* and UP become the same).
*
* NOTE! We used to use the x86 hardware context switching. The
* reason for not using it any more becomes apparent when you
* try to recover gracefully from saved state that is no longer
* valid (stale segment register values in particular). With the
* hardware task-switch, there is no way to fix up bad state in
* a reasonable manner.
*
* The fact that Intel documents the hardware task-switching to
* be slow is a fairly red herring - this code is not noticeably
* faster. However, there _is_ some room for improvement here,
* so the performance issues may eventually be a valid point.
* More important, however, is the fact that this allows us much
* more flexibility.
*
* The return value (in %ax) will be the "prev" task after
* the task-switch, and shows up in ret_from_fork in entry.S,
* for example.
*/
struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
{
struct thread_struct *prev = &prev_p->thread,
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
__unlazy_fpu(prev_p);
/* we're going to use this soon, after a few expensive things */
if (next_p->fpu_counter > 5)
prefetch(next->xstate);
/*
* Reload esp0.
*/
load_sp0(tss, next);
/*
* Save away %gs. No need to save %fs, as it was saved on the
* stack on entry. No need to save %es and %ds, as those are
* always kernel segments while inside the kernel. Doing this
* before setting the new TLS descriptors avoids the situation
* where we temporarily have non-reloadable segments in %fs
* and %gs. This could be an issue if the NMI handler ever
* used %fs or %gs (it does not today), or if the kernel is
* running inside of a hypervisor layer.
*/
savesegment(gs, prev->gs);
/*
* Load the per-thread Thread-Local Storage descriptor.
*/
load_TLS(next, cpu);
/*
* Restore IOPL if needed. In normal use, the flags restore
* in the switch assembly will handle this. But if the kernel
* is running virtualized at a non-zero CPL, the popf will
* not restore flags, so it must be done in a separate step.
*/
if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl))
set_iopl_mask(next->iopl);
/*
* Now maybe handle debug registers and/or IO bitmaps
*/
if (unlikely(task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV ||
task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
__switch_to_xtra(prev_p, next_p, tss);
[PATCH] seccomp: tsc disable I believe at least for seccomp it's worth to turn off the tsc, not just for HT but for the L2 cache too. So it's up to you, either you turn it off completely (which isn't very nice IMHO) or I recommend to apply this below patch. This has been tested successfully on x86-64 against current cogito repository (i686 compiles so I didn't bother testing ;). People selling the cpu through cpushare may appreciate this bit for a peace of mind. There's no way to get any timing info anymore with this applied (gettimeofday is forbidden of course). The seccomp environment is completely deterministic so it can't be allowed to get timing info, it has to be deterministic so in the future I can enable a computing mode that does a parallel computing for each task with server side transparent checkpointing and verification that the output is the same from all the 2/3 seller computers for each task, without the buyer even noticing (for now the verification is left to the buyer client side and there's no checkpointing, since that would require more kernel changes to track the dirty bits but it'll be easy to extend once the basic mode is finished). Eliminating a cold-cache read of the cr4 global variable will save one cacheline during the tlb flush while making the code per-cpu-safe at the same time. Thanks to Mikael Pettersson for noticing the tlb flush wasn't per-cpu-safe. The global tlb flush can run from irq (IPI calling do_flush_tlb_all) but it'll be transparent to the switch_to code since the IPI won't make any change to the cr4 contents from the point of view of the interrupted code and since it's now all per-cpu stuff, it will not race. So no need to disable irqs in switch_to slow path. Signed-off-by: Andrea Arcangeli <andrea@cpushare.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:36:36 -06:00
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
* the GDT and LDT are properly updated, and must be
* done before math_state_restore, so the TS bit is up
* to date.
*/
arch_leave_lazy_cpu_mode();
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
*
* tsk_used_math() checks prevent calling math_state_restore(),
* which can sleep in the case of !tsk_used_math()
*/
if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
/*
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
loadsegment(gs, next->gs);
x86_write_percpu(current_task, next_p);
return prev_p;
}
asmlinkage int sys_fork(struct pt_regs regs)
{
return do_fork(SIGCHLD, regs.sp, &regs, 0, NULL, NULL);
}
asmlinkage int sys_clone(struct pt_regs regs)
{
unsigned long clone_flags;
unsigned long newsp;
int __user *parent_tidptr, *child_tidptr;
clone_flags = regs.bx;
newsp = regs.cx;
parent_tidptr = (int __user *)regs.dx;
child_tidptr = (int __user *)regs.di;
if (!newsp)
newsp = regs.sp;
return do_fork(clone_flags, newsp, &regs, 0, parent_tidptr, child_tidptr);
}
/*
* This is trivial, and on the face of it looks like it
* could equally well be done in user mode.
*
* Not so, for quite unobvious reasons - register pressure.
* In user mode vfork() cannot have a stack frame, and if
* done by calling the "clone()" system call directly, you
* do not have enough call-clobbered registers to hold all
* the information you need.
*/
asmlinkage int sys_vfork(struct pt_regs regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.sp, &regs, 0, NULL, NULL);
}
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(struct pt_regs regs)
{
int error;
char * filename;
filename = getname((char __user *) regs.bx);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
error = do_execve(filename,
(char __user * __user *) regs.cx,
(char __user * __user *) regs.dx,
&regs);
if (error == 0) {
/* Make sure we don't return using sysenter.. */
set_thread_flag(TIF_IRET);
}
putname(filename);
out:
return error;
}
#define top_esp (THREAD_SIZE - sizeof(unsigned long))
#define top_ebp (THREAD_SIZE - 2*sizeof(unsigned long))
unsigned long get_wchan(struct task_struct *p)
{
unsigned long bp, sp, ip;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
sp = p->thread.sp;
if (!stack_page || sp < stack_page || sp > top_esp+stack_page)
return 0;
/* include/asm-i386/system.h:switch_to() pushes bp last. */
bp = *(unsigned long *) sp;
do {
if (bp < stack_page || bp > top_ebp+stack_page)
return 0;
ip = *(unsigned long *) (bp+4);
if (!in_sched_functions(ip))
return ip;
bp = *(unsigned long *) bp;
} while (count++ < 16);
return 0;
}
unsigned long arch_align_stack(unsigned long sp)
{
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
sp -= get_random_int() % 8192;
return sp & ~0xf;
}
x86: randomize brk Randomize the location of the heap (brk) for i386 and x86_64. The range is randomized in the range starting at current brk location up to 0x02000000 offset for both architectures. This, together with pie-executable-randomization.patch and pie-executable-randomization-fix.patch, should make the address space randomization on i386 and x86_64 complete. Arjan says: This is known to break older versions of some emacs variants, whose dumper code assumed that the last variable declared in the program is equal to the start of the dynamically allocated memory region. (The dumper is the code where emacs effectively dumps core at the end of it's compilation stage; this coredump is then loaded as the main program during normal use) iirc this was 5 years or so; we found this way back when I was at RH and we first did the security stuff there (including this brk randomization). It wasn't all variants of emacs, and it got fixed as a result (I vaguely remember that emacs already had code to deal with it for other archs/oses, just ifdeffed wrongly). It's a rare and wrong assumption as a general thing, just on x86 it mostly happened to be true (but to be honest, it'll break too if gcc does something fancy or if the linker does a non-standard order). Still its something we should at least document. Note 2: afaik it only broke the emacs *build*. I'm not 100% sure about that (it IS 5 years ago) though. [ akpm@linux-foundation.org: deuglification ] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:30:40 -07:00
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
unsigned long range_end = mm->brk + 0x02000000;
return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
}