2015-06-01 05:43:56 -06:00
|
|
|
/*
|
FROMGIT: crypto: chacha - add XChaCha12 support
Now that the generic implementation of ChaCha20 has been refactored to
allow varying the number of rounds, add support for XChaCha12, which is
the XSalsa construction applied to ChaCha12. ChaCha12 is one of the
three ciphers specified by the original ChaCha paper
(https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of
Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than
ChaCha20 but has a lower, but still large, security margin.
We need XChaCha12 support so that it can be used in the Adiantum
encryption mode, which enables disk/file encryption on low-end mobile
devices where AES-XTS is too slow as the CPUs lack AES instructions.
We'd prefer XChaCha20 (the more popular variant), but it's too slow on
some of our target devices, so at least in some cases we do need the
XChaCha12-based version. In more detail, the problem is that Adiantum
is still much slower than we're happy with, and encryption still has a
quite noticeable effect on the feel of low-end devices. Users and
vendors push back hard against encryption that degrades the user
experience, which always risks encryption being disabled entirely. So
we need to choose the fastest option that gives us a solid margin of
security, and here that's XChaCha12. The best known attack on ChaCha
breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's
security margin is still better than AES-256's. Much has been learned
about cryptanalysis of ARX ciphers since Salsa20 was originally designed
in 2005, and it now seems we can be comfortable with a smaller number of
rounds. The eSTREAM project also suggests the 12-round version of
Salsa20 as providing the best balance among the different variants:
combining very good performance with a "comfortable margin of security".
Note that it would be trivial to add vanilla ChaCha12 in addition to
XChaCha12. However, it's unneeded for now and therefore is omitted.
As discussed in the patch that introduced XChaCha20 support, I
considered splitting the code into separate chacha-common, chacha20,
xchacha20, and xchacha12 modules, so that these algorithms could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit aa7624093cb7fbf4fea95e612580d8d29a819f67
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I876a5be92e9f583effcd35a4b66a36608ac581f0
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:22 -07:00
|
|
|
* ChaCha and XChaCha stream ciphers, including ChaCha20 (RFC7539)
|
2015-06-01 05:43:56 -06:00
|
|
|
*
|
|
|
|
* Copyright (C) 2015 Martin Willi
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
* Copyright (C) 2018 Google LLC
|
2015-06-01 05:43:56 -06:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*/
|
|
|
|
|
2017-11-22 12:51:36 -07:00
|
|
|
#include <asm/unaligned.h>
|
2015-06-01 05:43:56 -06:00
|
|
|
#include <crypto/algapi.h>
|
2019-11-08 05:22:08 -07:00
|
|
|
#include <crypto/internal/chacha.h>
|
2016-12-09 07:33:51 -07:00
|
|
|
#include <crypto/internal/skcipher.h>
|
|
|
|
#include <linux/module.h>
|
2015-06-01 05:43:56 -06:00
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
static int chacha_stream_xor(struct skcipher_request *req,
|
2019-06-02 23:47:14 -06:00
|
|
|
const struct chacha_ctx *ctx, const u8 *iv)
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
{
|
|
|
|
struct skcipher_walk walk;
|
|
|
|
u32 state[16];
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = skcipher_walk_virt(&walk, req, false);
|
|
|
|
|
2019-11-08 05:22:18 -07:00
|
|
|
chacha_init_generic(state, ctx->key, iv);
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
|
|
|
|
while (walk.nbytes > 0) {
|
|
|
|
unsigned int nbytes = walk.nbytes;
|
|
|
|
|
|
|
|
if (nbytes < walk.total)
|
|
|
|
nbytes = round_down(nbytes, walk.stride);
|
|
|
|
|
2019-11-08 05:22:08 -07:00
|
|
|
chacha_crypt_generic(state, walk.dst.virt.addr,
|
|
|
|
walk.src.virt.addr, nbytes, ctx->nrounds);
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2019-11-08 05:22:18 -07:00
|
|
|
static int crypto_chacha_crypt(struct skcipher_request *req)
|
2015-06-01 05:43:56 -06:00
|
|
|
{
|
2016-12-09 07:33:51 -07:00
|
|
|
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
|
2015-06-01 05:43:56 -06:00
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
return chacha_stream_xor(req, ctx, req->iv);
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
}
|
2015-06-01 05:43:56 -06:00
|
|
|
|
2019-11-08 05:22:18 -07:00
|
|
|
static int crypto_xchacha_crypt(struct skcipher_request *req)
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
{
|
|
|
|
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
|
|
|
|
struct chacha_ctx subctx;
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
u32 state[16];
|
|
|
|
u8 real_iv[16];
|
2017-08-14 07:28:14 -06:00
|
|
|
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
/* Compute the subkey given the original key and first 128 nonce bits */
|
2019-11-08 05:22:18 -07:00
|
|
|
chacha_init_generic(state, ctx->key, req->iv);
|
2019-11-08 05:22:08 -07:00
|
|
|
hchacha_block_generic(state, subctx.key, ctx->nrounds);
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
subctx.nrounds = ctx->nrounds;
|
2017-08-14 07:28:14 -06:00
|
|
|
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
/* Build the real IV */
|
|
|
|
memcpy(&real_iv[0], req->iv + 24, 8); /* stream position */
|
|
|
|
memcpy(&real_iv[8], req->iv + 16, 8); /* remaining 64 nonce bits */
|
2015-06-01 05:43:56 -06:00
|
|
|
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
/* Generate the stream and XOR it with the data */
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
return chacha_stream_xor(req, &subctx, real_iv);
|
2015-06-01 05:43:56 -06:00
|
|
|
}
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
|
|
|
|
static struct skcipher_alg algs[] = {
|
|
|
|
{
|
|
|
|
.base.cra_name = "chacha20",
|
|
|
|
.base.cra_driver_name = "chacha20-generic",
|
|
|
|
.base.cra_priority = 100,
|
|
|
|
.base.cra_blocksize = 1,
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
.base.cra_ctxsize = sizeof(struct chacha_ctx),
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
.base.cra_module = THIS_MODULE,
|
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
.min_keysize = CHACHA_KEY_SIZE,
|
|
|
|
.max_keysize = CHACHA_KEY_SIZE,
|
|
|
|
.ivsize = CHACHA_IV_SIZE,
|
|
|
|
.chunksize = CHACHA_BLOCK_SIZE,
|
2019-11-18 00:21:29 -07:00
|
|
|
.setkey = chacha20_setkey,
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
.encrypt = crypto_chacha_crypt,
|
|
|
|
.decrypt = crypto_chacha_crypt,
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
}, {
|
|
|
|
.base.cra_name = "xchacha20",
|
|
|
|
.base.cra_driver_name = "xchacha20-generic",
|
|
|
|
.base.cra_priority = 100,
|
|
|
|
.base.cra_blocksize = 1,
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
.base.cra_ctxsize = sizeof(struct chacha_ctx),
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
.base.cra_module = THIS_MODULE,
|
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
.min_keysize = CHACHA_KEY_SIZE,
|
|
|
|
.max_keysize = CHACHA_KEY_SIZE,
|
|
|
|
.ivsize = XCHACHA_IV_SIZE,
|
|
|
|
.chunksize = CHACHA_BLOCK_SIZE,
|
2019-11-18 00:21:29 -07:00
|
|
|
.setkey = chacha20_setkey,
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
.encrypt = crypto_xchacha_crypt,
|
|
|
|
.decrypt = crypto_xchacha_crypt,
|
FROMGIT: crypto: chacha - add XChaCha12 support
Now that the generic implementation of ChaCha20 has been refactored to
allow varying the number of rounds, add support for XChaCha12, which is
the XSalsa construction applied to ChaCha12. ChaCha12 is one of the
three ciphers specified by the original ChaCha paper
(https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of
Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than
ChaCha20 but has a lower, but still large, security margin.
We need XChaCha12 support so that it can be used in the Adiantum
encryption mode, which enables disk/file encryption on low-end mobile
devices where AES-XTS is too slow as the CPUs lack AES instructions.
We'd prefer XChaCha20 (the more popular variant), but it's too slow on
some of our target devices, so at least in some cases we do need the
XChaCha12-based version. In more detail, the problem is that Adiantum
is still much slower than we're happy with, and encryption still has a
quite noticeable effect on the feel of low-end devices. Users and
vendors push back hard against encryption that degrades the user
experience, which always risks encryption being disabled entirely. So
we need to choose the fastest option that gives us a solid margin of
security, and here that's XChaCha12. The best known attack on ChaCha
breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's
security margin is still better than AES-256's. Much has been learned
about cryptanalysis of ARX ciphers since Salsa20 was originally designed
in 2005, and it now seems we can be comfortable with a smaller number of
rounds. The eSTREAM project also suggests the 12-round version of
Salsa20 as providing the best balance among the different variants:
combining very good performance with a "comfortable margin of security".
Note that it would be trivial to add vanilla ChaCha12 in addition to
XChaCha12. However, it's unneeded for now and therefore is omitted.
As discussed in the patch that introduced XChaCha20 support, I
considered splitting the code into separate chacha-common, chacha20,
xchacha20, and xchacha12 modules, so that these algorithms could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit aa7624093cb7fbf4fea95e612580d8d29a819f67
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I876a5be92e9f583effcd35a4b66a36608ac581f0
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:22 -07:00
|
|
|
}, {
|
|
|
|
.base.cra_name = "xchacha12",
|
|
|
|
.base.cra_driver_name = "xchacha12-generic",
|
|
|
|
.base.cra_priority = 100,
|
|
|
|
.base.cra_blocksize = 1,
|
|
|
|
.base.cra_ctxsize = sizeof(struct chacha_ctx),
|
|
|
|
.base.cra_module = THIS_MODULE,
|
|
|
|
|
|
|
|
.min_keysize = CHACHA_KEY_SIZE,
|
|
|
|
.max_keysize = CHACHA_KEY_SIZE,
|
|
|
|
.ivsize = XCHACHA_IV_SIZE,
|
|
|
|
.chunksize = CHACHA_BLOCK_SIZE,
|
2019-11-18 00:21:29 -07:00
|
|
|
.setkey = chacha12_setkey,
|
FROMGIT: crypto: chacha - add XChaCha12 support
Now that the generic implementation of ChaCha20 has been refactored to
allow varying the number of rounds, add support for XChaCha12, which is
the XSalsa construction applied to ChaCha12. ChaCha12 is one of the
three ciphers specified by the original ChaCha paper
(https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of
Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than
ChaCha20 but has a lower, but still large, security margin.
We need XChaCha12 support so that it can be used in the Adiantum
encryption mode, which enables disk/file encryption on low-end mobile
devices where AES-XTS is too slow as the CPUs lack AES instructions.
We'd prefer XChaCha20 (the more popular variant), but it's too slow on
some of our target devices, so at least in some cases we do need the
XChaCha12-based version. In more detail, the problem is that Adiantum
is still much slower than we're happy with, and encryption still has a
quite noticeable effect on the feel of low-end devices. Users and
vendors push back hard against encryption that degrades the user
experience, which always risks encryption being disabled entirely. So
we need to choose the fastest option that gives us a solid margin of
security, and here that's XChaCha12. The best known attack on ChaCha
breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's
security margin is still better than AES-256's. Much has been learned
about cryptanalysis of ARX ciphers since Salsa20 was originally designed
in 2005, and it now seems we can be comfortable with a smaller number of
rounds. The eSTREAM project also suggests the 12-round version of
Salsa20 as providing the best balance among the different variants:
combining very good performance with a "comfortable margin of security".
Note that it would be trivial to add vanilla ChaCha12 in addition to
XChaCha12. However, it's unneeded for now and therefore is omitted.
As discussed in the patch that introduced XChaCha20 support, I
considered splitting the code into separate chacha-common, chacha20,
xchacha20, and xchacha12 modules, so that these algorithms could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit aa7624093cb7fbf4fea95e612580d8d29a819f67
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I876a5be92e9f583effcd35a4b66a36608ac581f0
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:22 -07:00
|
|
|
.encrypt = crypto_xchacha_crypt,
|
|
|
|
.decrypt = crypto_xchacha_crypt,
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
}
|
2015-06-01 05:43:56 -06:00
|
|
|
};
|
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
static int __init chacha_generic_mod_init(void)
|
2015-06-01 05:43:56 -06:00
|
|
|
{
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
|
2015-06-01 05:43:56 -06:00
|
|
|
}
|
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
static void __exit chacha_generic_mod_fini(void)
|
2015-06-01 05:43:56 -06:00
|
|
|
{
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
|
2015-06-01 05:43:56 -06:00
|
|
|
}
|
|
|
|
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
module_init(chacha_generic_mod_init);
|
|
|
|
module_exit(chacha_generic_mod_fini);
|
2015-06-01 05:43:56 -06:00
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Martin Willi <martin@strongswan.org>");
|
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
|
|
|
MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (generic)");
|
2015-06-01 05:43:56 -06:00
|
|
|
MODULE_ALIAS_CRYPTO("chacha20");
|
|
|
|
MODULE_ALIAS_CRYPTO("chacha20-generic");
|
FROMGIT: crypto: chacha20-generic - add XChaCha20 support
Add support for the XChaCha20 stream cipher. XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey. Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.
We need XChaCha support in order to add support for the Adiantum
encryption mode. Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12. But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.
Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.
Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together. This allows users
to seek to any position in the stream.
I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit de61d7ae5d3789dcba3749a418f76613fbee8414
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I5c878e1d6577abda11d7b737cbb650baf16b6886
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:20 -07:00
|
|
|
MODULE_ALIAS_CRYPTO("xchacha20");
|
|
|
|
MODULE_ALIAS_CRYPTO("xchacha20-generic");
|
FROMGIT: crypto: chacha - add XChaCha12 support
Now that the generic implementation of ChaCha20 has been refactored to
allow varying the number of rounds, add support for XChaCha12, which is
the XSalsa construction applied to ChaCha12. ChaCha12 is one of the
three ciphers specified by the original ChaCha paper
(https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of
Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than
ChaCha20 but has a lower, but still large, security margin.
We need XChaCha12 support so that it can be used in the Adiantum
encryption mode, which enables disk/file encryption on low-end mobile
devices where AES-XTS is too slow as the CPUs lack AES instructions.
We'd prefer XChaCha20 (the more popular variant), but it's too slow on
some of our target devices, so at least in some cases we do need the
XChaCha12-based version. In more detail, the problem is that Adiantum
is still much slower than we're happy with, and encryption still has a
quite noticeable effect on the feel of low-end devices. Users and
vendors push back hard against encryption that degrades the user
experience, which always risks encryption being disabled entirely. So
we need to choose the fastest option that gives us a solid margin of
security, and here that's XChaCha12. The best known attack on ChaCha
breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's
security margin is still better than AES-256's. Much has been learned
about cryptanalysis of ARX ciphers since Salsa20 was originally designed
in 2005, and it now seems we can be comfortable with a smaller number of
rounds. The eSTREAM project also suggests the 12-round version of
Salsa20 as providing the best balance among the different variants:
combining very good performance with a "comfortable margin of security".
Note that it would be trivial to add vanilla ChaCha12 in addition to
XChaCha12. However, it's unneeded for now and therefore is omitted.
As discussed in the patch that introduced XChaCha20 support, I
considered splitting the code into separate chacha-common, chacha20,
xchacha20, and xchacha12 modules, so that these algorithms could be
enabled/disabled independently. However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit aa7624093cb7fbf4fea95e612580d8d29a819f67
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I876a5be92e9f583effcd35a4b66a36608ac581f0
Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:22 -07:00
|
|
|
MODULE_ALIAS_CRYPTO("xchacha12");
|
|
|
|
MODULE_ALIAS_CRYPTO("xchacha12-generic");
|