Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/scsi/Makefile

204 lines
7.6 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#
# Makefile for linux/drivers/scsi
#
# 30 May 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
# Changed link order to reflect new scsi initialization.
#
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
# The link order must be, SCSI Core, SCSI HBA drivers, and
# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
# satisfy certain initialization assumptions in the SCSI layer.
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
[SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m subdir-y|m isn't supposed to contain modules or built-in components. Change subdir-$(CONFIG_PCMCIA) to obj-$(CONFIG_PCMCIA). Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-07 06:36:23 -07:00
obj-$(CONFIG_PCMCIA) += pcmcia/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI) += scsi_mod.o
[SCSI] scsi-ml: Makefile and Kconfig changes for tgt Makefile and Kconfig for tgt. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-16 03:24:18 -07:00
obj-$(CONFIG_SCSI_TGT) += scsi_tgt.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[SCSI] embryonic RAID class The idea behind a RAID class is to provide a uniform interface to all RAID subsystems (both hardware and software) in the kernel. To do that, I've made this class a transport class that's entirely subsystem independent (although the matching routines have to match per subsystem, as you'll see looking at the code). I put it in the scsi subdirectory purely because I needed somewhere to play with it, but it's not a scsi specific module. I used a fusion raid card as the test bed for this; with that kind of card, this is the type of class output you get: jejb@titanic> ls -l /sys/class/raid_devices/20\:0\:0\:0/ total 0 lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-0 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:0/20:1:0:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-1 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:1/20:1:1:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 device -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:0:0/20:0:0:0/ -r--r--r-- 1 root root 16384 Aug 16 17:21 level -r--r--r-- 1 root root 16384 Aug 16 17:21 resync -r--r--r-- 1 root root 16384 Aug 16 17:21 state So it's really simple: for a SCSI device representing a hardware raid, it shows the raid level, the array state, the resync % complete (if the state is resyncing) and the underlying components of the RAID (these are exposed in fusion on the virtual channel 1). As you can see, this type of information can be exported by almost anything, including software raid. The more difficult trick, of course, is going to be getting it to perform configuration type actions with writable attributes. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-16 17:27:34 -06:00
obj-$(CONFIG_RAID_ATTRS) += raid_class.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
# --- NOTE ORDERING HERE ---
# For kernel non-modular link, transport attributes need to
# be initialised before drivers
# --------------------------
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
[SCSI] SAS transport class The SAS transport class contains common code to deal with SAS HBAs, an aproximated representation of SAS topologies in the driver model, and various sysfs attributes to expose these topologies and managment interfaces to userspace. In addition to the basic SCSI core objects this transport class introduces two additional intermediate objects: The SAS PHY as represented by struct sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS remote PHY represented by struct sas_rphy defines an "incoming" PHY on a SAS Expander or end device. Note that this is purely a software concept, the underlying hardware for a PHY and a remote PHY is the exactly the same. There is no concept of a SAS port in this code, users can see what PHYs form a wide port based on the port_identifier attribute, which is the same for all PHYs in a port. This submission doesn't handle hot-plug addition or removal of SAS devices and thus doesn't do scanning in a workqueue yet, that will be added in phase2 after this submission. In a third phase I will add additional managment infrastructure. I think this submission is ready for 2.6.14, but additional comments are of course very welcome. I'd like to thanks James Smart a lot for his very useful input on the design. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09 08:22:50 -06:00
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 08:22:51 -06:00
obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
[SCSI] add srp transport class This adds srp transport class that works with ib_srp and ibmvscsi. It creates only /sys/class/{srp_host,srp_remote_ports} and srp_remote_ports has only "port_id" attribute. viola:/sys/class/srp_remote_ports/port-0:1# ls device port_id subsystem uevent viola:/sys/class/srp_remote_ports/port-0:1# cat port_id 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-27 01:32:39 -06:00
obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o
[SCSI] scsi_dh: add infrastructure for SCSI Device Handlers Some of the storage devices (that can be accessed through multiple paths), do need some special handling for 1. Activating the passive path of the storage access. 2. Decode and handle the special sense codes returned by the devices. 3. Handle the I/Os being sent to the passive path, especially during the device probe time. when accessed through multiple paths. As of today this special device handling is done at the dm-multipath layer using dm-handlers. That works well for (1); for (2) to be handled at dm layer, scsi sense information need to be exported from SCSI to dm-layer, which is not very attractive; (3) cannot be done at all at the dm layer. Device handler has been moved to SCSI mainly to handle (2) and (3) properly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-01 15:49:46 -06:00
obj-$(CONFIG_SCSI_DH) += device_handler/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[SCSI] libfc: A modular Fibre Channel library libFC is composed of 4 blocks supported by an exchange manager and a framing library. The upper 4 layers are fc_lport, fc_disc, fc_rport and fc_fcp. A LLD that uses libfc could choose to either use libfc's block, or using the transport template defined in libfc.h, override one or more blocks with its own implementation. The EM (Exchange Manager) manages exhcanges/sequences for all commands- ELS, CT and FCP. The framing library frames ELS and CT commands. The fc_lport block manages the library's representation of the host's FC enabled ports. The fc_disc block manages discovery of targets as well as handling changes that occur in the FC fabric (via. RSCN events). The fc_rport block manages the library's representation of other entities in the FC fabric. Currently the library uses this block for targets, its peer when in point-to-point mode and the directory server, but can be extended for other entities if needed. The fc_fcp block interacts with the scsi-ml and handles all I/O. Signed-off-by: Robert Love <robert.w.love@intel.com> [jejb: added include of delay.h to fix ppc64 compile prob spotted by sfr] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-09 16:10:17 -07:00
obj-$(CONFIG_LIBFC) += libfc/
[SCSI] fcoe, libfc: add libfcoe module Just sets up build environment for libfcoe module towards a libfcoe library for libfc LLDs using FCoE as libfc transport. Common library code to libfcoe is added in next patch. Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for libfc, libfcoe and fcoe modules to accurately match the licenses. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-17 12:42:13 -06:00
obj-$(CONFIG_LIBFCOE) += fcoe/
[SCSI] fcoe: Fibre Channel over Ethernet Encapsulation protocol for running Fibre Channel over Ethernet interfaces. Creates virtual Fibre Channel host adapters using libfc. This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes libfc for Fibre Channel protocol processing and interacts with netdev to send/receive Ethernet packets. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-09 16:10:24 -07:00
obj-$(CONFIG_FCOE) += fcoe/
[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA fnic is a driver for the Cisco PCI-Express FCoE HBA Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-17 19:33:26 -06:00
obj-$(CONFIG_FCOE_FNIC) += fnic/
[SCSI] bnx2fc: Broadcom FCoE offload driver This driver is for Broadcom Netxtreme II 57712 chip. The following patch contains the driver sources for bnx2fc driver. libfc/libfcoe changes to enable bnx2fc have already gone through the fcoe tree. bnx2fc is a SCSI low level driver that interfaces with SCSI midlayer, libfc, libfcoe, cnic modules. bnx2fc driver uses services of libfc for slow path operations such as FIP and fabric discovery. The fast path IO perations are performed after offloading the session information to the underlying FCoE firmware. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-04 13:10:34 -07:00
obj-$(CONFIG_SCSI_BNX2X_FCOE) += libfc/ fcoe/ bnx2fc/
[SCSI] iscsi_tcp: hook iscsi_tcp into new libiscsi_tcp module This hooks iscsi_tcp into the libiscsi_tcp module and removes code that is now in libiscsi_tcp. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-01 23:32:12 -07:00
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
IB/iser: iSER Kconfig and Makefile Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-11 01:03:30 -06:00
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
[SCSI] iscsi boot: mv iscsi_boot_sysfs to drivers/scsi iscsi_boot_sysfs does not depend on firmware. Any iscsi driver can use it. This patch moves iscsi_boot_sysfs to the scsi dir, so that it can be used on any arch with any driver. Signed-off-by: Mike Christie <mchristi@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-02 11:46:12 -06:00
obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o
[SCSI] 53c700: Amiga 4000T NCR53c710 SCSI New driver for the Amiga 4000T built-in NCR53c710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 06:47:08 -06:00
obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o
[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI New driver for Amiga Zorro bus NCR53c710 SCSI controllers, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 06:47:09 -06:00
obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
[SCSI] m68k: new mac_esp scsi driver Replace the mac_esp driver with a new one based on the esp_scsi core. For esp_scsi: add support for sync transfers for the PIO mode, add a new esp_driver_ops method to get the maximum dma transfer size (like the old NCR53C9x driver), and some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-25 09:06:05 -06:00
obj-$(CONFIG_SCSI_MAC_ESP) += esp_scsi.o mac_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
[SCSI] 53c700: m68k MVME16x NCR53C710 SCSI New driver for the MVME16x NCR53C710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 06:47:07 -06:00
obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o
[SCSI] 53c700: m68k BVME6000 NCR53C710 SCSI New driver for the BVME6000 NCR53C710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 06:47:06 -06:00
obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
[SCSI] arcmsr: initial driver, version 1.20.00.13 arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap <rdunlap@xenotime.net> Christoph Hellwig <hch@lst.de> Matthew Wilcox <matthew@wil.cx> Adrian Bunk <bunk@stusta.de> Signed-off-by: Erich Chen <erich@areca.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 09:59:32 -06:00
obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 08:22:51 -06:00
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
[SCSI] pm8001: add SAS/SATA HBA driver This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based host adapters. Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Tom Peng <tom_peng@usish.com> Signed-off-by: Kevin Ao <aoqingyun@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-14 02:19:21 -06:00
obj-$(CONFIG_SCSI_PM8001) += pm8001/
isci: Intel(R) C600 Series Chipset Storage Control Unit Driver Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the chipset. This is a snapshot of the first publicly available version of the driver, commit 4c1db2d0 in the 'historical' branch. git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-02 23:56:22 -06:00
obj-$(CONFIG_SCSI_ISCI) += isci/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
obj-$(CONFIG_SCSI_IN2000) += in2000.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
[SCSI] qla2xxx: Kconfig: two fixes Original From: Adrian Bunk Here's a composite patch with Adrian's original additions and help-text with the new Kconfig variable SCSI_QLA_FC. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-09 11:17:40 -07:00
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
[SCSI] scsi: qla4xxx needs libiscsi.o qla4xxx driver needs to be linked with libiscsi.o to fix build errors. This happens when no other drivers that use libiscsi.o are enabled. ERROR: "iscsi_conn_stop" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_get_addr_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_teardown" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_host_alloc" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_start" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_send_pdu" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_get_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_get_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_set_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_failure" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_complete_pdu" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_setup" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_bind" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_setup" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_itt_to_task" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-31 16:02:00 -06:00
obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/
lpfc: add Emulex FC driver version 8.0.28 From: James.Smart@Emulex.Com Modified for kernel import and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17 15:05:31 -06:00
obj-$(CONFIG_SCSI_LPFC) += lpfc/
[SCSI] bfa: Brocade BFA FC SCSI driver Add new driver for Brocade Hardware Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-23 18:46:15 -06:00
obj-$(CONFIG_SCSI_BFA_FC) += bfa/
[SCSI] csiostor: Chelsio FCoE offload driver Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-15 10:11:18 -07:00
obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_PAS16) += pas16.o
obj-$(CONFIG_SCSI_T128) += t128.o
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
[SCSI] hpsa: add driver for HP Smart Array controllers. This driver supports a subset of HP Smart Array Controllers. It is a SCSI alternative to the cciss driver. [akpm@linux-foundation.org: avoid helpful cleanup patches] [achiang@hp.com: make device attrs static] [akpm@linux-foundation.org: msleep() does set_current_state() itself] Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-08 15:09:11 -07:00
obj-$(CONFIG_SCSI_HPSA) += hpsa.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_DTC3280) += dtc.o
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
[SCSI] MegaRAID SAS RAID: new driver Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-20 15:46:58 -06:00
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
[SCSI] mpt2sas v00.100.11.15 * This is new scsi lld device driver from LSI supporting the SAS 2.0 standard. I have split patchs by filename. * Here is list of new 6gb host controllers: LSI SAS2004 LSI SAS2008 LSI SAS2108 LSI SAS2116 * Here are the changes in the 4th posting of this patch set: (1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled (2) add mpt2sas to the SCSI Mid Layer Makefile (3) append mpt2sas_ to the naming of all non-static functions (4) fix oops for SMP_PASSTHRU (5) doorbell algorithm imported changes from windows driver * Here are the changes in the 3rd posting of this patch set: (1) add readl following writel from the function that disables interrupts (2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL (3) when calling pci_enable_msix, only pass one msix entry (instead of 15). (4) remove the "current HW implementation uses..... " comment in the sources (5) merged bug fix for SIGIO/POLLIN notifcation; reported by the storlib team. * Here are the changes in the 2nd posting of this patch set: (1) use little endian types in the mpi headers (2) merged in bug fix's from inhouse drivers. Signed-off-by: Eric Moore <eric.moore@lsi.com> Tested-by: peter Bogdanovic <pbog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-09 01:21:12 -06:00
obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/
[SCSI] mpt3sas: add new driver supporting 12GB SAS These driver files are initially, substantially similar to mpt2sas but, because mpt2sas is going into maintenance mode and mp3sas will become heavily developed, we elected to keep the code bases separate. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-29 19:14:21 -07:00
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
[SCSI] ufshcd: UFS Host controller driver This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-28 23:41:50 -07:00
obj-$(CONFIG_SCSI_UFSHCD) += ufs/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
[SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-23 00:48:10 -06:00
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_GDTH) += gdth.o
obj-$(CONFIG_SCSI_INITIO) += initio.o
obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
obj-$(CONFIG_SCSI_MESH) += mesh.o
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
[SCSI] 3w-sas: Add new driver for LSI 3ware 9750 [jejb: fix up for new queue depth code] Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-23 15:52:33 -06:00
obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_PPA) += ppa.o
obj-$(CONFIG_SCSI_IMM) += imm.o
[SCSI] jazz_esp: converted to use esp_core Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22 02:13:19 -06:00
obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o
[SCSI] sun3x_esp: convert to esp_scsi Converted sun3x_esp driver to use esp_scsi.c Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-31 16:13:34 -07:00
obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
[SCSI] SNI RM 53c710 driver This patch adds a SCSI driver for the onboard 53c710 chip of some SNI RM machines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-25 13:32:04 -07:00
obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
[SCSI] scsi tgt: SCSI RDMA Protocol library functions libsrp provides helper functions for SRP target drivers. Some SRP target drivers would be out of drivers/scsi/ so we added an entry for libsrp in drivers/scsi/Kconfig. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-30 11:00:50 -07:00
obj-$(CONFIG_SCSI_SRP) += libsrp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
[SCSI] scsi tgt: IBM eServer i/pSeries virtual SCSI target driver This is IBM Virtual SCSI target driver for tgt. The driver is based on the original ibmvscsis driver: http://lkml.org/lkml/2005/10/17/99 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-30 11:00:54 -07:00
obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvscsi/
[SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver This patch adds a new device driver to support the Virtual Fibre Channel interface on IBM Power based servers. The Virtual I/O Server on IBM Power servers utilizes N-Port ID Virtualization to export a Virtual Fibre Channel adapter to the client. This driver is the client device driver. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-01 12:14:30 -06:00
obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/
[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver HighPoint RocketRAID 3220/3320 series 8 channel PCI-X SATA RAID Host Adapters. Fixes from original submission: Merge Andrew Morton's patches: - Provide locking for global list - Fix debug printks - uninline function with multiple callsites - coding style fixups - remove unneeded casts of void* - kfree(NULL) is legal - Don't "succeed" if register_chrdev() failed - otherwise we'll later unregister a not-registered chrdev. - Don't return from hptiop_do_ioctl() with the spinlock held. - uninline __hpt_do_ioctl() Update for Arjan van de Ven's comments: - put all asm/ includes after the linux/ ones - replace mdelay with msleep - add pci posting flush - do not set pci command reqister in map_pci_bar - do not try merging sg elements in hptiop_buildsgl() - remove unused outstandingcommands member from hba structure - remove unimplemented hptiop_abort() handler - remove typedef u32 hpt_id_t Other updates: - fix endianess Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-16 00:38:09 -06:00
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
[SCSI] Add Promise SuperTrak driver Add Promise SuperTrak 'stex' driver, supporting SuperTrak EX8350/8300/16350/16300 controllers. The controller's firmware accepts SCSI commands, handing them to the underlying RAID or JBOD disks. The driver consisted of the following cleanups and fixes, beyond its initial submission: Ed Lin: stex: cleanup and minor fixes stex: add new device ids stex: update internal copy code path stex: add hard reset function stex: adjust command timeout in slave_config routine stex: use more efficient method for unload/shutdown flush Jeff Garzik: [SCSI] Add Promise SuperTrak 'shasta' driver. Rename drivers/scsi/shasta.c to stex.c ("SuperTrak EX"). [SCSI] stex: update with community comments from 'Promise SuperTrak' thread [SCSI] stex: Fix warning, trim trailing whitespace. [SCSI] stex: remove last remnants of "shasta" project code name [SCSI] stex: removed 6-byte command emulation [SCSI] stex: minor cleanups [SCSI] stex: minor fixes: irq flag, error return value [SCSI] stex: use dma_alloc_coherent() Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-01 01:12:19 -06:00
obj-$(CONFIG_SCSI_STEX) += stex.o
[SCSI] mvsas: move into new directory drivers/scsi/mvsas/ Zero functional changes, just file movement. This commit prepares for the upcoming integration of the Marvell-provided driver update that splits the driver into support for both 64xx and 94xx chip families. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-08 14:35:37 -06:00
obj-$(CONFIG_SCSI_MVSAS) += mvsas/
[SCSI] mvumi: Add Marvell UMI driver The Marvell Universal Message Interface (UMI) defines a messaging interface between host and Marvell products (Plato, for example). It considers situations of limited system resource and optimized system performance. UMI driver translates host request to message and sends message to FW via UMI, FW receives message and processes it, then sends response to UMI driver. FW generates an interrupt when it needs to send information or response to UMI driver Signed-off-by: Jianyun Li <jyli@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-11 09:22:44 -06:00
obj-$(CONFIG_SCSI_MVUMI) += mvumi.o
ps3: BD/DVD/CD-ROM Storage Driver Add a BD/DVD/CD-ROM Storage Driver for the PS3: - Implemented as a SCSI device driver - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor doesn't support scatter-gather Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 05:37:47 -06:00
obj-$(CONFIG_PS3_ROM) += ps3rom.o
[SCSI] cxgb3i: change cxgb3i to use libcxgbi Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-16 21:55:53 -06:00
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
[SCSI] cxgb4i v5: iscsi driver Added cxgb4i iSCSI driver. This patch implements the cxgb4i iscsi connection acceleration for the open-iscsi initiator. The cxgb4i driver offers the iscsi PDU based offload: - digest insertion and verification - payload direct-placement into host memory buffer. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-16 21:55:53 -06:00
obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
[SCSI] bnx2i: Add bnx2i iSCSI driver. New iSCSI driver for Broadcom BNX2 devices. The driver interfaces with the CNIC driver to access the hardware. Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08 19:14:44 -06:00
obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
[SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver [v2: fixed up virt_to_bus() issue spotted by sfr] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-04 20:06:35 -06:00
obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/
[SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-25 18:35:18 -06:00
obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o
[SCSI] virtio-scsi: SCSI driver for QEMU based virtual machines The virtio-scsi HBA is the basis of an alternative storage stack for QEMU-based virtual machines (including KVM). Compared to virtio-blk it is more scalable, because it supports many LUNs on a single PCI slot), more powerful (it more easily supports passthrough of host devices to the guest) and more easily extensible (new SCSI features implemented by QEMU should not require updating the driver in the guest). Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-05 04:16:00 -07:00
obj-$(CONFIG_SCSI_VIRTIO) += virtio_scsi.o
[SCSI] vmw_pvscsi: SCSI driver for VMware's virtual HBA. This is a driver for VMware's paravirtualized SCSI device, which should improve disk performance for guests running under control of VMware hypervisors that support such devices. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-13 15:51:05 -06:00
obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o
Staging: hv: storvsc: Move the storage driver out of the staging area The storage driver (storvsc_drv.c) handles all block storage devices assigned to Linux guests hosted on Hyper-V. This driver has been in the staging tree for a while and this patch moves it out of the staging area. James was willing to apply this patch during the 3.3-rc phase and a decision was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc patches for 3.4. Now that Greg has applied all of the pending storvsc patches, I am sending this patch to move this driver out of staging. Based on James' recommendation, this patch gets rid of the unneeded files in the staging/hv directory. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09 15:14:48 -07:00
obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_CHR_DEV_ST) += st.o
obj-$(CONFIG_CHR_DEV_OSST) += osst.o
obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
obj-$(CONFIG_CHR_DEV_SG) += sg.o
[SCSI] add scsi changer driver This patch adds a device driver for scsi media changer devices. Signed-off-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-10 02:59:13 -06:00
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
[SCSI] ses: add new Enclosure ULD This adds support to SCSI for enclosure services devices. It also makes use of the enclosure services added in an earlier patch to display the enclosure topology in sysfs. At the moment, the enclosures are SAS specific, but if anyone actually has a non-SAS enclosure that follows the SES-2 standard, we can add that as well. On my Vitesse based system, the enclosures show up like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/ total 0 -r--r--r-- 1 root root 4096 2008-02-03 15:44 components lrwxrwxrwx 1 root root 0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 000 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 001 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 002 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 003 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 004 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 005 lrwxrwxrwx 1 root root 0 2008-02-03 15:44 subsystem -> ../../enclosure --w------- 1 root root 4096 2008-02-03 15:44 uevent And the individual occupied slots like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/ total 0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 active lrwxrwxrwx 1 root root 0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault -rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate -rw-r--r-- 1 root root 4096 2008-02-03 15:45 status lrwxrwxrwx 1 root root 0 2008-02-03 15:45 subsystem -> ../../../enclosure_component -r--r--r-- 1 root root 4096 2008-02-03 15:45 type --w------- 1 root root 4096 2008-02-03 15:45 uevent You can flash the various blinky lights by echoing to the fault and locate files. >From the device's point of view, you can see it has an enclosure like this: sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/ block:sda generic queue_depth state bsg:0:0:0:0 iocounterbits queue_type subsystem bus iodone_cnt rescan timeout delete ioerr_cnt rev type device_blocked iorequest_cnt scsi_device:0:0:0:0 uevent driver modalias scsi_disk:0:0:0:0 vendor enclosure_component:SLOT 001 model scsi_generic:sg0 evt_media_change power scsi_level Note the enclosure_component:SLOT 001 which shows where in the enclosure this device fits. The astute will notice that I'm using SCSI VPD Inquiries to identify the devices. This, unfortunately, won't work for SATA devices unless we do some really nasty hacking about on the SAT because the only think that knows the SAS addresses for SATA devices is libsas, not libata where the SAT resides. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 14:48:56 -07:00
obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[SCSI] scsi: Add osd library to build system OSD in kernel source code is assumed to be at: drivers/scsi/osd/ with its own Makefile and Kconfig Add includes to them from drivers/scsi Makefile and Kconfig Add OSD to MAINTAINERS file Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 08:24:14 -07:00
obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
scsi: link in the debug driver last If the debug driver is built-in, link it in last, so that any real drivers will probe first, rather than having the debug driver pick the first scsi slots.. Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 18:39:38 -07:00
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA With dma-mapping-prevent-dma-dependent-code-from-linking-on.patch scsi fails to build on !HAS_DMA architectures: drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map': : undefined reference to `dma_map_sg' drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap': : undefined reference to `dma_unmap_sg' I split those functions out into a new file. Builds on s390 and i386. Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if HAS_DMA is set. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-09 12:59:59 -06:00
scsicam.o scsi_error.o scsi_lib.o
scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-18 15:30:09 -06:00
scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
[SCSI] add scsi trace core functions and put trace points Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-01 05:41:40 -06:00
scsi_mod-y += scsi_trace.o
PM: Remove CONFIG_PM_OPS After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be replaced with CONFIG_PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-10 16:06:54 -07:00
scsi_mod-$(CONFIG_PM) += scsi_pm.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
Staging: hv: storvsc: Move the storage driver out of the staging area The storage driver (storvsc_drv.c) handles all block storage devices assigned to Linux guests hosted on Hyper-V. This driver has been in the staging tree for a while and this patch moves it out of the staging area. James was willing to apply this patch during the 3.3-rc phase and a decision was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc patches for 3.4. Now that Greg has applied all of the pending storvsc patches, I am sending this patch to move this driver out of staging. Based on James' recommendation, this patch gets rid of the unneeded files in the staging/hv directory. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09 15:14:48 -07:00
hv_storvsc-y := storvsc_drv.o
[SCSI] scsi-ml: Makefile and Kconfig changes for tgt Makefile and Kconfig for tgt. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-16 03:24:18 -07:00
scsi_tgt-y += scsi_tgt_lib.o scsi_tgt_if.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sd_mod-objs := sd.o
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field Support for controllers and disks that implement DIF protection information: - During command preparation the RDPROTECT/WRPROTECT must be set correctly if the target has DIF enabled. - READ(6) and WRITE(6) are not supported when DIF is on. - The controller must be told how to handle the I/O via the protection operation field in scsi_cmnd. - Refactor the I/O completion code that extracts failed LBA from the returned sense data and handle DIF failures correctly. - sd_dif.c implements the functions required to prepare and complete requests with protection information attached. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 02:28:35 -06:00
sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
[PATCH] m68k: oktagon makefile fix oktagon_esp is described as modular. However, drivers/scsi/Makefile doesn't handle it right - it's multi-object module, with one of the parts being built from .S. Current makefile tries to declare each part a module of its own; that not only wouldn't work (oktagon_io.o doesn't have the right parts for that), it actually doesn't even build since kbuild doesn't believe in single-object modules built from .S. Turned into proper multi-object module... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 02:06:14 -07:00
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
# Files generated that shall be removed upon make clean
[SCSI] 53c7xx: kill driver It's been more than enough time now to try to get the new m68k drivers into the tree. Let's remove the old ones and we can remerge the new glue once it's ready. Given that there are patches to rename two out of the three drivers in m68k CVS and all of them need a lot of codingstyle love anyway that's probably the better strategy to begin with. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kars de Jong <jongk@linux-m68k.org> Cc: linux-m68k@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-11 08:30:29 -06:00
clean-files := 53c700_d.h 53c700_u.h
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
# If you want to play with the firmware, uncomment
# GENERATE_FIRMWARE := 1
ifdef GENERATE_FIRMWARE
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
endif
Reference in a new issue Copy permalink