DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
/*
|
|
|
|
|
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
|
|
|
|
|
* Copyright (c) 2007-2008 Intel Corporation
|
|
|
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
|
|
|
*
|
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
|
*
|
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
|
* Software.
|
|
|
|
|
*
|
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
|
|
|
* IN THE SOFTWARE.
|
|
|
|
|
*/
|
|
|
|
|
#ifndef __INTEL_DRV_H__
|
|
|
|
|
#define __INTEL_DRV_H__
|
|
|
|
|
|
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
|
#include <linux/i2c-id.h>
|
|
|
|
|
#include <linux/i2c-algo-bit.h>
|
|
|
|
|
#include "drm_crtc.h"
|
|
|
|
|
|
|
|
|
|
#include "drm_crtc_helper.h"
|
|
|
|
|
/*
|
|
|
|
|
* Display related stuff
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* store information about an Ixxx DVO */
|
|
|
|
|
/* The i830->i865 use multiple DVOs with multiple i2cs */
|
|
|
|
|
/* the i915, i945 have a single sDVO i2c bus - which is different */
|
|
|
|
|
#define MAX_OUTPUTS 6
|
|
|
|
|
/* maximum connectors per crtcs in the mode set */
|
|
|
|
|
#define INTELFB_CONN_LIMIT 4
|
|
|
|
|
|
|
|
|
|
#define INTEL_I2C_BUS_DVO 1
|
|
|
|
|
#define INTEL_I2C_BUS_SDVO 2
|
|
|
|
|
|
|
|
|
|
/* these are outputs from the chip - integrated only
|
|
|
|
|
external chips are via DVO or SDVO output */
|
|
|
|
|
#define INTEL_OUTPUT_UNUSED 0
|
|
|
|
|
#define INTEL_OUTPUT_ANALOG 1
|
|
|
|
|
#define INTEL_OUTPUT_DVO 2
|
|
|
|
|
#define INTEL_OUTPUT_SDVO 3
|
|
|
|
|
#define INTEL_OUTPUT_LVDS 4
|
|
|
|
|
#define INTEL_OUTPUT_TVOUT 5
|
2009-01-02 14:33:00 -07:00
|
|
|
#define INTEL_OUTPUT_HDMI 6
|
2009-04-07 17:16:42 -06:00
|
|
|
#define INTEL_OUTPUT_DISPLAYPORT 7
|
2009-07-23 11:00:32 -06:00
|
|
|
#define INTEL_OUTPUT_EDP 8
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
|
2009-08-23 23:50:24 -06:00
|
|
|
/* Intel Pipe Clone Bit */
|
|
|
|
|
#define INTEL_HDMIB_CLONE_BIT 1
|
|
|
|
|
#define INTEL_HDMIC_CLONE_BIT 2
|
|
|
|
|
#define INTEL_HDMID_CLONE_BIT 3
|
|
|
|
|
#define INTEL_HDMIE_CLONE_BIT 4
|
|
|
|
|
#define INTEL_HDMIF_CLONE_BIT 5
|
|
|
|
|
#define INTEL_SDVO_NON_TV_CLONE_BIT 6
|
|
|
|
|
#define INTEL_SDVO_TV_CLONE_BIT 7
|
|
|
|
|
#define INTEL_SDVO_LVDS_CLONE_BIT 8
|
|
|
|
|
#define INTEL_ANALOG_CLONE_BIT 9
|
|
|
|
|
#define INTEL_TV_CLONE_BIT 10
|
|
|
|
|
#define INTEL_DP_B_CLONE_BIT 11
|
|
|
|
|
#define INTEL_DP_C_CLONE_BIT 12
|
|
|
|
|
#define INTEL_DP_D_CLONE_BIT 13
|
|
|
|
|
#define INTEL_LVDS_CLONE_BIT 14
|
|
|
|
|
#define INTEL_DVO_TMDS_CLONE_BIT 15
|
|
|
|
|
#define INTEL_DVO_LVDS_CLONE_BIT 16
|
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
#define INTEL_DVO_CHIP_NONE 0
|
|
|
|
|
#define INTEL_DVO_CHIP_LVDS 1
|
|
|
|
|
#define INTEL_DVO_CHIP_TMDS 2
|
|
|
|
|
#define INTEL_DVO_CHIP_TVOUT 4
|
|
|
|
|
|
|
|
|
|
struct intel_i2c_chan {
|
|
|
|
|
struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */
|
|
|
|
|
u32 reg; /* GPIO reg */
|
|
|
|
|
struct i2c_adapter adapter;
|
|
|
|
|
struct i2c_algo_bit_data algo;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct intel_framebuffer {
|
|
|
|
|
struct drm_framebuffer base;
|
|
|
|
|
struct drm_gem_object *obj;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
struct intel_output {
|
|
|
|
|
struct drm_connector base;
|
|
|
|
|
|
|
|
|
|
struct drm_encoder enc;
|
|
|
|
|
int type;
|
2009-05-30 13:16:25 -06:00
|
|
|
struct i2c_adapter *i2c_bus;
|
|
|
|
|
struct i2c_adapter *ddc_bus;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
bool load_detect_temp;
|
2009-02-02 16:11:52 -07:00
|
|
|
bool needs_tv_clock;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
void *dev_priv;
|
2009-05-06 12:48:58 -06:00
|
|
|
void (*hot_plug)(struct intel_output *);
|
2009-08-23 23:50:24 -06:00
|
|
|
int crtc_mask;
|
|
|
|
|
int clone_mask;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct intel_crtc {
|
|
|
|
|
struct drm_crtc base;
|
|
|
|
|
int pipe;
|
|
|
|
|
int plane;
|
2008-12-17 20:14:59 -07:00
|
|
|
struct drm_gem_object *cursor_bo;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
uint32_t cursor_addr;
|
|
|
|
|
u8 lut_r[256], lut_g[256], lut_b[256];
|
|
|
|
|
int dpms_mode;
|
2009-08-17 14:31:43 -06:00
|
|
|
bool busy; /* is scanout buffer being updated frequently? */
|
|
|
|
|
struct timer_list idle_timer;
|
|
|
|
|
bool lowfreq_avail;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
|
|
|
|
|
#define to_intel_output(x) container_of(x, struct intel_output, base)
|
|
|
|
|
#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
|
|
|
|
|
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
|
|
|
|
|
|
2009-05-30 13:16:25 -06:00
|
|
|
struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
|
|
|
|
|
const char *name);
|
|
|
|
|
void intel_i2c_destroy(struct i2c_adapter *adapter);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
int intel_ddc_get_modes(struct intel_output *intel_output);
|
|
|
|
|
extern bool intel_ddc_probe(struct intel_output *intel_output);
|
2009-04-06 21:02:28 -06:00
|
|
|
void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
extern void intel_crt_init(struct drm_device *dev);
|
2009-01-02 14:33:00 -07:00
|
|
|
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
|
|
|
|
|
extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
extern void intel_dvo_init(struct drm_device *dev);
|
|
|
|
|
extern void intel_tv_init(struct drm_device *dev);
|
2009-08-17 14:31:43 -06:00
|
|
|
extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
extern void intel_lvds_init(struct drm_device *dev);
|
2009-04-07 17:16:42 -06:00
|
|
|
extern void intel_dp_init(struct drm_device *dev, int dp_reg);
|
|
|
|
|
void
|
|
|
|
|
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
|
|
|
|
|
struct drm_display_mode *adjusted_mode);
|
2009-07-23 11:00:32 -06:00
|
|
|
extern void intel_edp_link_config (struct intel_output *, int *, int *);
|
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
|
|
|
|
|
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
|
|
|
|
|
extern void intel_encoder_prepare (struct drm_encoder *encoder);
|
|
|
|
|
extern void intel_encoder_commit (struct drm_encoder *encoder);
|
|
|
|
|
|
|
|
|
|
extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
|
|
|
|
|
|
|
|
|
|
extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
|
|
|
|
|
struct drm_crtc *crtc);
|
2009-04-29 15:43:54 -06:00
|
|
|
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
|
|
|
|
|
struct drm_file *file_priv);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
extern void intel_wait_for_vblank(struct drm_device *dev);
|
|
|
|
|
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
|
|
|
|
|
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
|
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
|
int *dpms_mode);
|
|
|
|
|
extern void intel_release_load_detect_pipe(struct intel_output *intel_output,
|
|
|
|
|
int dpms_mode);
|
|
|
|
|
|
|
|
|
|
extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
|
|
|
|
|
extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
|
|
|
|
|
extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
|
|
|
|
|
extern int intelfb_probe(struct drm_device *dev);
|
|
|
|
|
extern int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
|
|
|
|
|
extern int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc);
|
|
|
|
|
extern void intelfb_restore(void);
|
|
|
|
|
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
|
|
|
|
|
u16 blue, int regno);
|
|
|
|
|
|
|
|
|
|
extern int intel_framebuffer_create(struct drm_device *dev,
|
|
|
|
|
struct drm_mode_fb_cmd *mode_cmd,
|
|
|
|
|
struct drm_framebuffer **fb,
|
|
|
|
|
struct drm_gem_object *obj);
|
|
|
|
|
#endif /* __INTEL_DRV_H__ */
|
