2005-04-16 16:20:36 -06:00
|
|
|
/*
|
|
|
|
|
* xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards
|
|
|
|
|
*
|
|
|
|
|
* This software is (C) by the respective authors, and licensed under the GPL
|
|
|
|
|
* License.
|
|
|
|
|
*
|
|
|
|
|
* Written by Arjan van de Ven for Red Hat, Inc.
|
|
|
|
|
* Based on work by Jeff Garzik, Doug Ledford and Donald Becker
|
|
|
|
|
*
|
|
|
|
|
* This software may be used and distributed according to the terms
|
|
|
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
|
|
|
*
|
|
|
|
|
*
|
|
|
|
|
* $Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
#include <linux/string.h>
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
#include <linux/pci.h>
|
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/ethtool.h>
|
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
|
|
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
|
#define enter(x) printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__)
|
|
|
|
|
#define leave(x) printk("Leave: %s, %s line %i\n",x,__FILE__,__LINE__)
|
|
|
|
|
#else
|
|
|
|
|
#define enter(x) do {} while (0)
|
|
|
|
|
#define leave(x) do {} while (0)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Xircom Cardbus ethernet driver");
|
|
|
|
|
MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>");
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* IO registers on the card, offsets */
|
|
|
|
|
#define CSR0 0x00
|
|
|
|
|
#define CSR1 0x08
|
|
|
|
|
#define CSR2 0x10
|
|
|
|
|
#define CSR3 0x18
|
|
|
|
|
#define CSR4 0x20
|
|
|
|
|
#define CSR5 0x28
|
|
|
|
|
#define CSR6 0x30
|
|
|
|
|
#define CSR7 0x38
|
|
|
|
|
#define CSR8 0x40
|
|
|
|
|
#define CSR9 0x48
|
|
|
|
|
#define CSR10 0x50
|
|
|
|
|
#define CSR11 0x58
|
|
|
|
|
#define CSR12 0x60
|
|
|
|
|
#define CSR13 0x68
|
|
|
|
|
#define CSR14 0x70
|
|
|
|
|
#define CSR15 0x78
|
|
|
|
|
#define CSR16 0x80
|
|
|
|
|
|
|
|
|
|
/* PCI registers */
|
|
|
|
|
#define PCI_POWERMGMT 0x40
|
|
|
|
|
|
|
|
|
|
/* Offsets of the buffers within the descriptor pages, in bytes */
|
|
|
|
|
|
|
|
|
|
#define NUMDESCRIPTORS 4
|
|
|
|
|
|
|
|
|
|
static int bufferoffsets[NUMDESCRIPTORS] = {128,2048,4096,6144};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
struct xircom_private {
|
|
|
|
|
/* Send and receive buffers, kernel-addressable and dma addressable forms */
|
|
|
|
|
|
|
|
|
|
unsigned int *rx_buffer;
|
|
|
|
|
unsigned int *tx_buffer;
|
|
|
|
|
|
|
|
|
|
dma_addr_t rx_dma_handle;
|
|
|
|
|
dma_addr_t tx_dma_handle;
|
|
|
|
|
|
|
|
|
|
struct sk_buff *tx_skb[4];
|
|
|
|
|
|
|
|
|
|
unsigned long io_port;
|
|
|
|
|
int open;
|
|
|
|
|
|
|
|
|
|
/* transmit_used is the rotating counter that indicates which transmit
|
|
|
|
|
descriptor has to be used next */
|
|
|
|
|
int transmit_used;
|
|
|
|
|
|
|
|
|
|
/* Spinlock to serialize register operations.
|
|
|
|
|
It must be helt while manipulating the following registers:
|
|
|
|
|
CSR0, CSR6, CSR7, CSR9, CSR10, CSR15
|
|
|
|
|
*/
|
|
|
|
|
spinlock_t lock;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
|
struct net_device *dev;
|
|
|
|
|
struct net_device_stats stats;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Function prototypes */
|
|
|
|
|
static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id);
|
|
|
|
|
static void xircom_remove(struct pci_dev *pdev);
|
|
|
|
|
static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
|
|
|
|
|
static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
|
|
|
static int xircom_open(struct net_device *dev);
|
|
|
|
|
static int xircom_close(struct net_device *dev);
|
|
|
|
|
static void xircom_up(struct xircom_private *card);
|
|
|
|
|
static struct net_device_stats *xircom_get_stats(struct net_device *dev);
|
2005-09-12 23:05:13 -06:00
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
2005-04-16 16:20:36 -06:00
|
|
|
static void xircom_poll_controller(struct net_device *dev);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset);
|
|
|
|
|
static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset);
|
|
|
|
|
static void read_mac_address(struct xircom_private *card);
|
|
|
|
|
static void transceiver_voodoo(struct xircom_private *card);
|
|
|
|
|
static void initialize_card(struct xircom_private *card);
|
|
|
|
|
static void trigger_transmit(struct xircom_private *card);
|
|
|
|
|
static void trigger_receive(struct xircom_private *card);
|
|
|
|
|
static void setup_descriptors(struct xircom_private *card);
|
|
|
|
|
static void remove_descriptors(struct xircom_private *card);
|
|
|
|
|
static int link_status_changed(struct xircom_private *card);
|
|
|
|
|
static void activate_receiver(struct xircom_private *card);
|
|
|
|
|
static void deactivate_receiver(struct xircom_private *card);
|
|
|
|
|
static void activate_transmitter(struct xircom_private *card);
|
|
|
|
|
static void deactivate_transmitter(struct xircom_private *card);
|
|
|
|
|
static void enable_transmit_interrupt(struct xircom_private *card);
|
|
|
|
|
static void enable_receive_interrupt(struct xircom_private *card);
|
|
|
|
|
static void enable_link_interrupt(struct xircom_private *card);
|
|
|
|
|
static void disable_all_interrupts(struct xircom_private *card);
|
|
|
|
|
static int link_status(struct xircom_private *card);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static struct pci_device_id xircom_pci_table[] = {
|
|
|
|
|
{0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,},
|
|
|
|
|
{0,},
|
|
|
|
|
};
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, xircom_pci_table);
|
|
|
|
|
|
|
|
|
|
static struct pci_driver xircom_ops = {
|
|
|
|
|
.name = "xircom_cb",
|
|
|
|
|
.id_table = xircom_pci_table,
|
|
|
|
|
.probe = xircom_probe,
|
|
|
|
|
.remove = xircom_remove,
|
|
|
|
|
.suspend =NULL,
|
|
|
|
|
.resume =NULL
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
|
static void print_binary(unsigned int number)
|
|
|
|
|
{
|
|
|
|
|
int i,i2;
|
|
|
|
|
char buffer[64];
|
|
|
|
|
memset(buffer,0,64);
|
|
|
|
|
i2=0;
|
|
|
|
|
for (i=31;i>=0;i--) {
|
|
|
|
|
if (number & (1<<i))
|
|
|
|
|
buffer[i2++]='1';
|
|
|
|
|
else
|
|
|
|
|
buffer[i2++]='0';
|
|
|
|
|
if ((i&3)==0)
|
|
|
|
|
buffer[i2++]=' ';
|
|
|
|
|
}
|
|
|
|
|
printk("%s\n",buffer);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static void netdev_get_drvinfo(struct net_device *dev,
|
|
|
|
|
struct ethtool_drvinfo *info)
|
|
|
|
|
{
|
|
|
|
|
struct xircom_private *private = netdev_priv(dev);
|
|
|
|
|
|
|
|
|
|
strcpy(info->driver, "xircom_cb");
|
|
|
|
|
strcpy(info->bus_info, pci_name(private->pdev));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct ethtool_ops netdev_ethtool_ops = {
|
|
|
|
|
.get_drvinfo = netdev_get_drvinfo,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* xircom_probe is the code that gets called on device insertion.
|
|
|
|
|
it sets up the hardware and registers the device to the networklayer.
|
|
|
|
|
|
|
|
|
|
TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the
|
|
|
|
|
first two packets that get send, and pump hates that.
|
|
|
|
|
|
|
|
|
|
*/
|
|
|
|
|
static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
|
|
|
{
|
|
|
|
|
struct net_device *dev = NULL;
|
|
|
|
|
struct xircom_private *private;
|
|
|
|
|
unsigned char chip_rev;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
unsigned short tmp16;
|
|
|
|
|
enter("xircom_probe");
|
|
|
|
|
|
|
|
|
|
/* First do the PCI initialisation */
|
|
|
|
|
|
|
|
|
|
if (pci_enable_device(pdev))
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
|
|
/* disable all powermanagement */
|
|
|
|
|
pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000);
|
|
|
|
|
|
|
|
|
|
pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/
|
|
|
|
|
|
|
|
|
|
/* clear PCI status, if any */
|
|
|
|
|
pci_read_config_word (pdev,PCI_STATUS, &tmp16);
|
|
|
|
|
pci_write_config_word (pdev, PCI_STATUS,tmp16);
|
|
|
|
|
|
|
|
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
|
|
|
|
|
|
|
|
|
|
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
|
|
|
|
|
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
Before changing the hardware, allocate the memory.
|
|
|
|
|
This way, we can fail gracefully if not enough memory
|
|
|
|
|
is available.
|
|
|
|
|
*/
|
|
|
|
|
dev = alloc_etherdev(sizeof(struct xircom_private));
|
|
|
|
|
if (!dev) {
|
|
|
|
|
printk(KERN_ERR "xircom_probe: failed to allocate etherdev\n");
|
|
|
|
|
goto device_fail;
|
|
|
|
|
}
|
|
|
|
|
private = netdev_priv(dev);
|
|
|
|
|
|
|
|
|
|
/* Allocate the send/receive buffers */
|
|
|
|
|
private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
|
|
|
|
|
if (private->rx_buffer == NULL) {
|
|
|
|
|
printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
|
|
|
|
|
goto rx_buf_fail;
|
|
|
|
|
}
|
|
|
|
|
private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
|
|
|
|
|
if (private->tx_buffer == NULL) {
|
|
|
|
|
printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
|
|
|
|
|
goto tx_buf_fail;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
private->dev = dev;
|
|
|
|
|
private->pdev = pdev;
|
|
|
|
|
private->io_port = pci_resource_start(pdev, 0);
|
|
|
|
|
spin_lock_init(&private->lock);
|
|
|
|
|
dev->irq = pdev->irq;
|
|
|
|
|
dev->base_addr = private->io_port;
|
|
|
|
|
|
|
|
|
|
initialize_card(private);
|
|
|
|
|
read_mac_address(private);
|
|
|
|
|
setup_descriptors(private);
|
|
|
|
|
|
|
|
|
|
dev->open = &xircom_open;
|
|
|
|
|
dev->hard_start_xmit = &xircom_start_xmit;
|
|
|
|
|
dev->stop = &xircom_close;
|
|
|
|
|
dev->get_stats = &xircom_get_stats;
|
|
|
|
|
dev->priv = private;
|
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
|
|
|
dev->poll_controller = &xircom_poll_controller;
|
|
|
|
|
#endif
|
|
|
|
|
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
|
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
|
|
|
|
|
|
if (register_netdev(dev)) {
|
|
|
|
|
printk(KERN_ERR "xircom_probe: netdevice registration failed.\n");
|
|
|
|
|
goto reg_fail;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
|
|
|
|
|
/* start the transmitter to get a heartbeat */
|
|
|
|
|
/* TODO: send 2 dummy packets here */
|
|
|
|
|
transceiver_voodoo(private);
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&private->lock,flags);
|
|
|
|
|
activate_transmitter(private);
|
|
|
|
|
activate_receiver(private);
|
|
|
|
|
spin_unlock_irqrestore(&private->lock,flags);
|
|
|
|
|
|
|
|
|
|
trigger_receive(private);
|
|
|
|
|
|
|
|
|
|
leave("xircom_probe");
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
reg_fail:
|
|
|
|
|
kfree(private->tx_buffer);
|
|
|
|
|
tx_buf_fail:
|
|
|
|
|
kfree(private->rx_buffer);
|
|
|
|
|
rx_buf_fail:
|
|
|
|
|
free_netdev(dev);
|
|
|
|
|
device_fail:
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
xircom_remove is called on module-unload or on device-eject.
|
|
|
|
|
it unregisters the irq, io-region and network device.
|
|
|
|
|
Interrupts and such are already stopped in the "ifconfig ethX down"
|
|
|
|
|
code.
|
|
|
|
|
*/
|
|
|
|
|
static void __devexit xircom_remove(struct pci_dev *pdev)
|
|
|
|
|
{
|
|
|
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
|
struct xircom_private *card = netdev_priv(dev);
|
|
|
|
|
|
|
|
|
|
enter("xircom_remove");
|
|
|
|
|
pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle);
|
|
|
|
|
pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle);
|
|
|
|
|
|
|
|
|
|
release_region(dev->base_addr, 128);
|
|
|
|
|
unregister_netdev(dev);
|
|
|
|
|
free_netdev(dev);
|
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
|
leave("xircom_remove");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
|
|
|
|
|
{
|
|
|
|
|
struct net_device *dev = (struct net_device *) dev_instance;
|
|
|
|
|
struct xircom_private *card = netdev_priv(dev);
|
|
|
|
|
unsigned int status;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
enter("xircom_interrupt\n");
|
|
|
|
|
|
|
|
|
|
spin_lock(&card->lock);
|
|
|
|
|
status = inl(card->io_port+CSR5);
|
|
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
|
print_binary(status);
|
|
|
|
|
printk("tx status 0x%08x 0x%08x \n",card->tx_buffer[0],card->tx_buffer[4]);
|
|
|
|
|
printk("rx status 0x%08x 0x%08x \n",card->rx_buffer[0],card->rx_buffer[4]);
|
|
|
|
|
#endif
|
|
|
|
|
/* Handle shared irq and hotplug */
|
|
|
|
|
if (status == 0 || status == 0xffffffff) {
|
|
|
|
|
spin_unlock(&card->lock);
|
|
|
|
|
return IRQ_NONE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (link_status_changed(card)) {
|
|
|
|
|
int newlink;
|
|
|
|
|
printk(KERN_DEBUG "xircom_cb: Link status has changed \n");
|
|
|
|
|
newlink = link_status(card);
|
|
|
|
|
printk(KERN_INFO "xircom_cb: Link is %i mbit \n",newlink);
|
|
|
|
|
if (newlink)
|
|
|
|
|
netif_carrier_on(dev);
|
|
|
|
|
else
|
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Clear all remaining interrupts */
|
|
|
|
|
status |= 0xffffffff; /* FIXME: make this clear only the
|
|
|
|
|
real existing bits */
|
|
|
|
|
outl(status,card->io_port+CSR5);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
for (i=0;i<NUMDESCRIPTORS;i++)
|
|
|
|
|
investigate_write_descriptor(dev,card,i,bufferoffsets[i]);
|
|
|
|
|
for (i=0;i<NUMDESCRIPTORS;i++)
|
|
|
|
|
investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
spin_unlock(&card->lock);
|
|
|
|
|
leave("xircom_interrupt");
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct xircom_private *card;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
int nextdescriptor;
|
|
|
|
|
int desc;
|
|
|
|
|
enter("xircom_start_xmit");
|
|
|
|
|
|
|
|
|
|
card = netdev_priv(dev);
|
|
|
|
|
spin_lock_irqsave(&card->lock,flags);
|
|
|
|
|
|
|
|
|
|
/* First see if we can free some descriptors */
|
|
|
|
|
for (desc=0;desc<NUMDESCRIPTORS;desc++)
|
|
|
|
|
investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS);
|
|
|
|
|
desc = card->transmit_used;
|
|
|
|
|
|
|
|
|
|
/* only send the packet if the descriptor is free */
|
|
|
|
|
if (card->tx_buffer[4*desc]==0) {
|
|
|
|
|
/* Copy the packet data; zero the memory first as the card
|
|
|
|
|
sometimes sends more than you ask it to. */
|
|
|
|
|
|
|
|
|
|
memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536);
|
|
|
|
|
memcpy(&(card->tx_buffer[bufferoffsets[desc]/4]),skb->data,skb->len);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* FIXME: The specification tells us that the length we send HAS to be a multiple of
|
|
|
|
|
4 bytes. */
|
|
|
|
|
|
|
|
|
|
card->tx_buffer[4*desc+1] = skb->len;
|
|
|
|
|
if (desc == NUMDESCRIPTORS-1)
|
|
|
|
|
card->tx_buffer[4*desc+1] |= (1<<25); /* bit 25: last descriptor of the ring */
|
|
|
|
|
|
|
|
|
|
card->tx_buffer[4*desc+1] |= 0xF0000000;
|
|
|
|
|
/* 0xF0... means want interrupts*/
|
|
|
|
|
card->tx_skb[desc] = skb;
|
|
|
|
|
|
|
|
|
|
wmb();
|
|
|
|
|
/* This gives the descriptor to the card */
|
|
|
|
|
card->tx_buffer[4*desc] = 0x80000000;
|
|
|
|
|
trigger_transmit(card);
|
|
|
|
|
if (((int)card->tx_buffer[nextdescriptor*4])<0) { /* next descriptor is occupied... */
|
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
|
}
|
|
|
|
|
card->transmit_used = nextdescriptor;
|
|
|
|
|
leave("xircom-start_xmit - sent");
|
|
|
|
|
spin_unlock_irqrestore(&card->lock,flags);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Uh oh... no free descriptor... drop the packet */
|
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
|
spin_unlock_irqrestore(&card->lock,flags);
|
|
|
|
|
trigger_transmit(card);
|
|
|
|
|
|
|
|
|
|
return -EIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int xircom_open(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct xircom_private *xp = netdev_priv(dev);
|
|
|
|
|
int retval;
|
|
|
|
|
enter("xircom_open");
|
|
|
|
|
printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
|
|
|
|
|
retval = request_irq(dev->irq, &xircom_interrupt, SA_SHIRQ, dev->name, dev);
|
|
|
|
|
if (retval) {
|
|
|
|
|
leave("xircom_open - No IRQ");
|
|
|
|
|
return retval;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
xircom_up(xp);
|
|
|
|
|
xp->open = 1;
|
|
|
|
|
leave("xircom_open");
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int xircom_close(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct xircom_private *card;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
|
|
enter("xircom_close");
|
|
|
|
|
card = netdev_priv(dev);
|
|
|
|
|
netif_stop_queue(dev); /* we don't want new packets */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&card->lock,flags);
|
|
|
|
|
|
|
|
|
|
disable_all_interrupts(card);
|
|
|
|
|
#if 0
|
|
|
|
|
/* We can enable this again once we send dummy packets on ifconfig ethX up */
|
|
|
|
|
deactivate_receiver(card);
|
|
|
|
|
deactivate_transmitter(card);
|
|
|
|
|
#endif
|
|
|
|
|
remove_descriptors(card);
|
|
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&card->lock,flags);
|
|
|
|
|
|
|
|
|
|
card->open = 0;
|
|
|
|
|
free_irq(dev->irq,dev);
|
|
|
|
|
|
|
|
|
|
leave("xircom_close");
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static struct net_device_stats *xircom_get_stats(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct xircom_private *card = netdev_priv(dev);
|
|
|
|
|
return &card->stats;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
|
|
|
static void xircom_poll_controller(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
disable_irq(dev->irq);
|
|
|
|
|
xircom_interrupt(dev->irq, dev, NULL);
|
|
|
|
|
enable_irq(dev->irq);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void initialize_card(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
enter("initialize_card");
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
|
|
|
|
|
|
|
|
/* First: reset the card */
|
|
|
|
|
val = inl(card->io_port + CSR0);
|
|
|
|
|
val |= 0x01; /* Software reset */
|
|
|
|
|
outl(val, card->io_port + CSR0);
|
|
|
|
|
|
|
|
|
|
udelay(100); /* give the card some time to reset */
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR0);
|
|
|
|
|
val &= ~0x01; /* disable Software reset */
|
|
|
|
|
outl(val, card->io_port + CSR0);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
val = 0; /* Value 0x00 is a safe and conservative value
|
|
|
|
|
for the PCI configuration settings */
|
|
|
|
|
outl(val, card->io_port + CSR0);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
disable_all_interrupts(card);
|
|
|
|
|
deactivate_receiver(card);
|
|
|
|
|
deactivate_transmitter(card);
|
|
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
|
|
|
|
|
|
leave("initialize_card");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
trigger_transmit causes the card to check for frames to be transmitted.
|
|
|
|
|
This is accomplished by writing to the CSR1 port. The documentation
|
|
|
|
|
claims that the act of writing is sufficient and that the value is
|
|
|
|
|
ignored; I chose zero.
|
|
|
|
|
*/
|
|
|
|
|
static void trigger_transmit(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("trigger_transmit");
|
|
|
|
|
|
|
|
|
|
val = 0;
|
|
|
|
|
outl(val, card->io_port + CSR1);
|
|
|
|
|
|
|
|
|
|
leave("trigger_transmit");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
trigger_receive causes the card to check for empty frames in the
|
|
|
|
|
descriptor list in which packets can be received.
|
|
|
|
|
This is accomplished by writing to the CSR2 port. The documentation
|
|
|
|
|
claims that the act of writing is sufficient and that the value is
|
|
|
|
|
ignored; I chose zero.
|
|
|
|
|
*/
|
|
|
|
|
static void trigger_receive(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("trigger_receive");
|
|
|
|
|
|
|
|
|
|
val = 0;
|
|
|
|
|
outl(val, card->io_port + CSR2);
|
|
|
|
|
|
|
|
|
|
leave("trigger_receive");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
setup_descriptors initializes the send and receive buffers to be valid
|
|
|
|
|
descriptors and programs the addresses into the card.
|
|
|
|
|
*/
|
|
|
|
|
static void setup_descriptors(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
unsigned int address;
|
|
|
|
|
int i;
|
|
|
|
|
enter("setup_descriptors");
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (card->rx_buffer == NULL)
|
|
|
|
|
BUG();
|
|
|
|
|
if (card->tx_buffer == NULL)
|
|
|
|
|
BUG();
|
|
|
|
|
|
|
|
|
|
/* Receive descriptors */
|
|
|
|
|
memset(card->rx_buffer, 0, 128); /* clear the descriptors */
|
|
|
|
|
for (i=0;i<NUMDESCRIPTORS;i++ ) {
|
|
|
|
|
|
|
|
|
|
/* Rx Descr0: It's empty, let the card own it, no errors -> 0x80000000 */
|
|
|
|
|
card->rx_buffer[i*4 + 0] = 0x80000000;
|
|
|
|
|
/* Rx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */
|
|
|
|
|
card->rx_buffer[i*4 + 1] = 1536;
|
|
|
|
|
if (i==NUMDESCRIPTORS-1)
|
|
|
|
|
card->rx_buffer[i*4 + 1] |= (1 << 25); /* bit 25 is "last descriptor" */
|
|
|
|
|
|
|
|
|
|
/* Rx Descr2: address of the buffer
|
|
|
|
|
we store the buffer at the 2nd half of the page */
|
|
|
|
|
|
|
|
|
|
address = (unsigned long) card->rx_dma_handle;
|
|
|
|
|
card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
|
|
|
|
|
/* Rx Desc3: address of 2nd buffer -> 0 */
|
|
|
|
|
card->rx_buffer[i*4 + 3] = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
wmb();
|
|
|
|
|
/* Write the receive descriptor ring address to the card */
|
|
|
|
|
address = (unsigned long) card->rx_dma_handle;
|
|
|
|
|
val = cpu_to_le32(address);
|
|
|
|
|
outl(val, card->io_port + CSR3); /* Receive descr list address */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* transmit descriptors */
|
|
|
|
|
memset(card->tx_buffer, 0, 128); /* clear the descriptors */
|
|
|
|
|
|
|
|
|
|
for (i=0;i<NUMDESCRIPTORS;i++ ) {
|
|
|
|
|
/* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */
|
|
|
|
|
card->tx_buffer[i*4 + 0] = 0x00000000;
|
|
|
|
|
/* Tx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */
|
|
|
|
|
card->tx_buffer[i*4 + 1] = 1536;
|
|
|
|
|
if (i==NUMDESCRIPTORS-1)
|
|
|
|
|
card->tx_buffer[i*4 + 1] |= (1 << 25); /* bit 25 is "last descriptor" */
|
|
|
|
|
|
|
|
|
|
/* Tx Descr2: address of the buffer
|
|
|
|
|
we store the buffer at the 2nd half of the page */
|
|
|
|
|
address = (unsigned long) card->tx_dma_handle;
|
|
|
|
|
card->tx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
|
|
|
|
|
/* Tx Desc3: address of 2nd buffer -> 0 */
|
|
|
|
|
card->tx_buffer[i*4 + 3] = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
wmb();
|
|
|
|
|
/* wite the transmit descriptor ring to the card */
|
|
|
|
|
address = (unsigned long) card->tx_dma_handle;
|
|
|
|
|
val =cpu_to_le32(address);
|
|
|
|
|
outl(val, card->io_port + CSR4); /* xmit descr list address */
|
|
|
|
|
|
|
|
|
|
leave("setup_descriptors");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
remove_descriptors informs the card the descriptors are no longer
|
|
|
|
|
valid by setting the address in the card to 0x00.
|
|
|
|
|
*/
|
|
|
|
|
static void remove_descriptors(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("remove_descriptors");
|
|
|
|
|
|
|
|
|
|
val = 0;
|
|
|
|
|
outl(val, card->io_port + CSR3); /* Receive descriptor address */
|
|
|
|
|
outl(val, card->io_port + CSR4); /* Send descriptor address */
|
|
|
|
|
|
|
|
|
|
leave("remove_descriptors");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
link_status_changed returns 1 if the card has indicated that
|
|
|
|
|
the link status has changed. The new link status has to be read from CSR12.
|
|
|
|
|
|
|
|
|
|
This function also clears the status-bit.
|
|
|
|
|
*/
|
|
|
|
|
static int link_status_changed(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("link_status_changed");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR5); /* Status register */
|
|
|
|
|
|
|
|
|
|
if ((val & (1 << 27)) == 0) { /* no change */
|
|
|
|
|
leave("link_status_changed - nochange");
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* clear the event by writing a 1 to the bit in the
|
|
|
|
|
status register. */
|
|
|
|
|
val = (1 << 27);
|
|
|
|
|
outl(val, card->io_port + CSR5);
|
|
|
|
|
|
|
|
|
|
leave("link_status_changed - changed");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
transmit_active returns 1 if the transmitter on the card is
|
|
|
|
|
in a non-stopped state.
|
|
|
|
|
*/
|
|
|
|
|
static int transmit_active(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("transmit_active");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR5); /* Status register */
|
|
|
|
|
|
|
|
|
|
if ((val & (7 << 20)) == 0) { /* transmitter disabled */
|
|
|
|
|
leave("transmit_active - inactive");
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
leave("transmit_active - active");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
receive_active returns 1 if the receiver on the card is
|
|
|
|
|
in a non-stopped state.
|
|
|
|
|
*/
|
|
|
|
|
static int receive_active(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("receive_active");
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR5); /* Status register */
|
|
|
|
|
|
|
|
|
|
if ((val & (7 << 17)) == 0) { /* receiver disabled */
|
|
|
|
|
leave("receive_active - inactive");
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
leave("receive_active - active");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
activate_receiver enables the receiver on the card.
|
|
|
|
|
Before being allowed to active the receiver, the receiver
|
|
|
|
|
must be completely de-activated. To achieve this,
|
|
|
|
|
this code actually disables the receiver first; then it waits for the
|
|
|
|
|
receiver to become inactive, then it activates the receiver and then
|
|
|
|
|
it waits for the receiver to be active.
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void activate_receiver(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
int counter;
|
|
|
|
|
enter("activate_receiver");
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR6); /* Operation mode */
|
|
|
|
|
|
|
|
|
|
/* If the "active" bit is set and the receiver is already
|
|
|
|
|
active, no need to do the expensive thing */
|
|
|
|
|
if ((val&2) && (receive_active(card)))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
val = val & ~2; /* disable the receiver */
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
counter = 10;
|
|
|
|
|
while (counter > 0) {
|
|
|
|
|
if (!receive_active(card))
|
|
|
|
|
break;
|
|
|
|
|
/* wait a while */
|
|
|
|
|
udelay(50);
|
|
|
|
|
counter--;
|
|
|
|
|
if (counter <= 0)
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* enable the receiver */
|
|
|
|
|
val = inl(card->io_port + CSR6); /* Operation mode */
|
|
|
|
|
val = val | 2; /* enable the receiver */
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
/* now wait for the card to activate again */
|
|
|
|
|
counter = 10;
|
|
|
|
|
while (counter > 0) {
|
|
|
|
|
if (receive_active(card))
|
|
|
|
|
break;
|
|
|
|
|
/* wait a while */
|
|
|
|
|
udelay(50);
|
|
|
|
|
counter--;
|
|
|
|
|
if (counter <= 0)
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Receiver failed to re-activate\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
leave("activate_receiver");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
deactivate_receiver disables the receiver on the card.
|
|
|
|
|
To achieve this this code disables the receiver first;
|
|
|
|
|
then it waits for the receiver to become inactive.
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void deactivate_receiver(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
int counter;
|
|
|
|
|
enter("deactivate_receiver");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR6); /* Operation mode */
|
|
|
|
|
val = val & ~2; /* disable the receiver */
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
counter = 10;
|
|
|
|
|
while (counter > 0) {
|
|
|
|
|
if (!receive_active(card))
|
|
|
|
|
break;
|
|
|
|
|
/* wait a while */
|
|
|
|
|
udelay(50);
|
|
|
|
|
counter--;
|
|
|
|
|
if (counter <= 0)
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
leave("deactivate_receiver");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
activate_transmitter enables the transmitter on the card.
|
|
|
|
|
Before being allowed to active the transmitter, the transmitter
|
|
|
|
|
must be completely de-activated. To achieve this,
|
|
|
|
|
this code actually disables the transmitter first; then it waits for the
|
|
|
|
|
transmitter to become inactive, then it activates the transmitter and then
|
|
|
|
|
it waits for the transmitter to be active again.
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void activate_transmitter(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
int counter;
|
|
|
|
|
enter("activate_transmitter");
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR6); /* Operation mode */
|
|
|
|
|
|
|
|
|
|
/* If the "active" bit is set and the receiver is already
|
|
|
|
|
active, no need to do the expensive thing */
|
|
|
|
|
if ((val&(1<<13)) && (transmit_active(card)))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
val = val & ~(1 << 13); /* disable the transmitter */
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
counter = 10;
|
|
|
|
|
while (counter > 0) {
|
|
|
|
|
if (!transmit_active(card))
|
|
|
|
|
break;
|
|
|
|
|
/* wait a while */
|
|
|
|
|
udelay(50);
|
|
|
|
|
counter--;
|
|
|
|
|
if (counter <= 0)
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* enable the transmitter */
|
|
|
|
|
val = inl(card->io_port + CSR6); /* Operation mode */
|
|
|
|
|
val = val | (1 << 13); /* enable the transmitter */
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
/* now wait for the card to activate again */
|
|
|
|
|
counter = 10;
|
|
|
|
|
while (counter > 0) {
|
|
|
|
|
if (transmit_active(card))
|
|
|
|
|
break;
|
|
|
|
|
/* wait a while */
|
|
|
|
|
udelay(50);
|
|
|
|
|
counter--;
|
|
|
|
|
if (counter <= 0)
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Transmitter failed to re-activate\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
leave("activate_transmitter");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
deactivate_transmitter disables the transmitter on the card.
|
|
|
|
|
To achieve this this code disables the transmitter first;
|
|
|
|
|
then it waits for the transmitter to become inactive.
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void deactivate_transmitter(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
int counter;
|
|
|
|
|
enter("deactivate_transmitter");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR6); /* Operation mode */
|
|
|
|
|
val = val & ~2; /* disable the transmitter */
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
counter = 20;
|
|
|
|
|
while (counter > 0) {
|
|
|
|
|
if (!transmit_active(card))
|
|
|
|
|
break;
|
|
|
|
|
/* wait a while */
|
|
|
|
|
udelay(50);
|
|
|
|
|
counter--;
|
|
|
|
|
if (counter <= 0)
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
leave("deactivate_transmitter");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
enable_transmit_interrupt enables the transmit interrupt
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void enable_transmit_interrupt(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("enable_transmit_interrupt");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR7); /* Interrupt enable register */
|
|
|
|
|
val |= 1; /* enable the transmit interrupt */
|
|
|
|
|
outl(val, card->io_port + CSR7);
|
|
|
|
|
|
|
|
|
|
leave("enable_transmit_interrupt");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
enable_receive_interrupt enables the receive interrupt
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void enable_receive_interrupt(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("enable_receive_interrupt");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR7); /* Interrupt enable register */
|
|
|
|
|
val = val | (1 << 6); /* enable the receive interrupt */
|
|
|
|
|
outl(val, card->io_port + CSR7);
|
|
|
|
|
|
|
|
|
|
leave("enable_receive_interrupt");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
enable_link_interrupt enables the link status change interrupt
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void enable_link_interrupt(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("enable_link_interrupt");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR7); /* Interrupt enable register */
|
|
|
|
|
val = val | (1 << 27); /* enable the link status chage interrupt */
|
|
|
|
|
outl(val, card->io_port + CSR7);
|
|
|
|
|
|
|
|
|
|
leave("enable_link_interrupt");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
disable_all_interrupts disables all interrupts
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void disable_all_interrupts(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("enable_all_interrupts");
|
|
|
|
|
|
|
|
|
|
val = 0; /* disable all interrupts */
|
|
|
|
|
outl(val, card->io_port + CSR7);
|
|
|
|
|
|
|
|
|
|
leave("disable_all_interrupts");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
enable_common_interrupts enables several weird interrupts
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static void enable_common_interrupts(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("enable_link_interrupt");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR7); /* Interrupt enable register */
|
|
|
|
|
val |= (1<<16); /* Normal Interrupt Summary */
|
|
|
|
|
val |= (1<<15); /* Abnormal Interrupt Summary */
|
|
|
|
|
val |= (1<<13); /* Fatal bus error */
|
|
|
|
|
val |= (1<<8); /* Receive Process Stopped */
|
|
|
|
|
val |= (1<<7); /* Receive Buffer Unavailable */
|
|
|
|
|
val |= (1<<5); /* Transmit Underflow */
|
|
|
|
|
val |= (1<<2); /* Transmit Buffer Unavailable */
|
|
|
|
|
val |= (1<<1); /* Transmit Process Stopped */
|
|
|
|
|
outl(val, card->io_port + CSR7);
|
|
|
|
|
|
|
|
|
|
leave("enable_link_interrupt");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
enable_promisc starts promisc mode
|
|
|
|
|
|
|
|
|
|
must be called with the lock held and interrupts disabled.
|
|
|
|
|
*/
|
|
|
|
|
static int enable_promisc(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("enable_promisc");
|
|
|
|
|
|
|
|
|
|
val = inl(card->io_port + CSR6);
|
|
|
|
|
val = val | (1 << 6);
|
|
|
|
|
outl(val, card->io_port + CSR6);
|
|
|
|
|
|
|
|
|
|
leave("enable_promisc");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
|
|
|
|
|
|
|
|
|
|
Must be called in locked state with interrupts disabled
|
|
|
|
|
*/
|
|
|
|
|
static int link_status(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned int val;
|
|
|
|
|
enter("link_status");
|
|
|
|
|
|
|
|
|
|
val = inb(card->io_port + CSR12);
|
|
|
|
|
|
|
|
|
|
if (!(val&(1<<2))) /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */
|
|
|
|
|
return 10;
|
|
|
|
|
if (!(val&(1<<1))) /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */
|
|
|
|
|
return 100;
|
|
|
|
|
|
|
|
|
|
/* If we get here -> no link at all */
|
|
|
|
|
|
|
|
|
|
leave("link_status");
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure.
|
|
|
|
|
|
|
|
|
|
This function will take the spinlock itself and can, as a result, not be called with the lock helt.
|
|
|
|
|
*/
|
|
|
|
|
static void read_mac_address(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned char j, tuple, link, data_id, data_count;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
enter("read_mac_address");
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
|
|
|
|
|
|
|
|
outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */
|
|
|
|
|
for (i = 0x100; i < 0x1f7; i += link + 2) {
|
|
|
|
|
outl(i, card->io_port + CSR10);
|
|
|
|
|
tuple = inl(card->io_port + CSR9) & 0xff;
|
|
|
|
|
outl(i + 1, card->io_port + CSR10);
|
|
|
|
|
link = inl(card->io_port + CSR9) & 0xff;
|
|
|
|
|
outl(i + 2, card->io_port + CSR10);
|
|
|
|
|
data_id = inl(card->io_port + CSR9) & 0xff;
|
|
|
|
|
outl(i + 3, card->io_port + CSR10);
|
|
|
|
|
data_count = inl(card->io_port + CSR9) & 0xff;
|
|
|
|
|
if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) {
|
|
|
|
|
/*
|
|
|
|
|
* This is it. We have the data we want.
|
|
|
|
|
*/
|
|
|
|
|
for (j = 0; j < 6; j++) {
|
|
|
|
|
outl(i + j + 4, card->io_port + CSR10);
|
|
|
|
|
card->dev->dev_addr[j] = inl(card->io_port + CSR9) & 0xff;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
} else if (link == 0) {
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
|
for (i = 0; i < 6; i++)
|
|
|
|
|
printk("%c%2.2X", i ? ':' : ' ', card->dev->dev_addr[i]);
|
|
|
|
|
printk("\n");
|
|
|
|
|
#endif
|
|
|
|
|
leave("read_mac_address");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
transceiver_voodoo() enables the external UTP plug thingy.
|
|
|
|
|
it's called voodoo as I stole this code and cannot cross-reference
|
|
|
|
|
it with the specification.
|
|
|
|
|
*/
|
|
|
|
|
static void transceiver_voodoo(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
|
|
enter("transceiver_voodoo");
|
|
|
|
|
|
|
|
|
|
/* disable all powermanagement */
|
|
|
|
|
pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
|
|
|
|
|
|
|
|
|
|
setup_descriptors(card);
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
|
|
|
|
|
|
|
|
outl(0x0008, card->io_port + CSR15);
|
|
|
|
|
udelay(25);
|
|
|
|
|
outl(0xa8050000, card->io_port + CSR15);
|
|
|
|
|
udelay(25);
|
|
|
|
|
outl(0xa00f0000, card->io_port + CSR15);
|
|
|
|
|
udelay(25);
|
|
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
|
|
|
|
|
|
netif_start_queue(card->dev);
|
|
|
|
|
leave("transceiver_voodoo");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void xircom_up(struct xircom_private *card)
|
|
|
|
|
{
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
enter("xircom_up");
|
|
|
|
|
|
|
|
|
|
/* disable all powermanagement */
|
|
|
|
|
pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
|
|
|
|
|
|
|
|
|
|
setup_descriptors(card);
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
enable_link_interrupt(card);
|
|
|
|
|
enable_transmit_interrupt(card);
|
|
|
|
|
enable_receive_interrupt(card);
|
|
|
|
|
enable_common_interrupts(card);
|
|
|
|
|
enable_promisc(card);
|
|
|
|
|
|
|
|
|
|
/* The card can have received packets already, read them away now */
|
|
|
|
|
for (i=0;i<NUMDESCRIPTORS;i++)
|
|
|
|
|
investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
|
trigger_receive(card);
|
|
|
|
|
trigger_transmit(card);
|
|
|
|
|
netif_start_queue(card->dev);
|
|
|
|
|
leave("xircom_up");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Bufferoffset is in BYTES */
|
|
|
|
|
static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset)
|
|
|
|
|
{
|
|
|
|
|
int status;
|
|
|
|
|
|
|
|
|
|
enter("investigate_read_descriptor");
|
|
|
|
|
status = card->rx_buffer[4*descnr];
|
|
|
|
|
|
|
|
|
|
if ((status > 0)) { /* packet received */
|
|
|
|
|
|
|
|
|
|
/* TODO: discard error packets */
|
|
|
|
|
|
|
|
|
|
short pkt_len = ((status >> 16) & 0x7ff) - 4; /* minus 4, we don't want the CRC */
|
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
|
|
if (pkt_len > 1518) {
|
|
|
|
|
printk(KERN_ERR "xircom_cb: Packet length %i is bogus \n",pkt_len);
|
|
|
|
|
pkt_len = 1518;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
skb = dev_alloc_skb(pkt_len + 2);
|
|
|
|
|
if (skb == NULL) {
|
|
|
|
|
card->stats.rx_dropped++;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
skb->dev = dev;
|
|
|
|
|
skb_reserve(skb, 2);
|
|
|
|
|
eth_copy_and_sum(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len, 0);
|
|
|
|
|
skb_put(skb, pkt_len);
|
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
|
netif_rx(skb);
|
|
|
|
|
dev->last_rx = jiffies;
|
|
|
|
|
card->stats.rx_packets++;
|
|
|
|
|
card->stats.rx_bytes += pkt_len;
|
|
|
|
|
|
|
|
|
|
out:
|
|
|
|
|
/* give the buffer back to the card */
|
|
|
|
|
card->rx_buffer[4*descnr] = 0x80000000;
|
|
|
|
|
trigger_receive(card);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
leave("investigate_read_descriptor");
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Bufferoffset is in BYTES */
|
|
|
|
|
static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset)
|
|
|
|
|
{
|
|
|
|
|
int status;
|
|
|
|
|
|
|
|
|
|
enter("investigate_write_descriptor");
|
|
|
|
|
|
|
|
|
|
status = card->tx_buffer[4*descnr];
|
|
|
|
|
#if 0
|
|
|
|
|
if (status & 0x8000) { /* Major error */
|
|
|
|
|
printk(KERN_ERR "Major transmit error status %x \n", status);
|
|
|
|
|
card->tx_buffer[4*descnr] = 0;
|
|
|
|
|
netif_wake_queue (dev);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
if (status > 0) { /* bit 31 is 0 when done */
|
|
|
|
|
if (card->tx_skb[descnr]!=NULL) {
|
|
|
|
|
card->stats.tx_bytes += card->tx_skb[descnr]->len;
|
|
|
|
|
dev_kfree_skb_irq(card->tx_skb[descnr]);
|
|
|
|
|
}
|
|
|
|
|
card->tx_skb[descnr] = NULL;
|
|
|
|
|
/* Bit 8 in the status field is 1 if there was a collision */
|
|
|
|
|
if (status&(1<<8))
|
|
|
|
|
card->stats.collisions++;
|
|
|
|
|
card->tx_buffer[4*descnr] = 0; /* descriptor is free again */
|
|
|
|
|
netif_wake_queue (dev);
|
|
|
|
|
card->stats.tx_packets++;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
leave("investigate_write_descriptor");
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int __init xircom_init(void)
|
|
|
|
|
{
|
|
|
|
|
pci_register_driver(&xircom_ops);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void __exit xircom_exit(void)
|
|
|
|
|
{
|
|
|
|
|
pci_unregister_driver(&xircom_ops);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
module_init(xircom_init)
|
|
|
|
|
module_exit(xircom_exit)
|
|
|
|
|
|
