License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 08:07:57 -06:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
if MMU
|
|
|
|
|
|
|
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
|
|
|
|
bool
|
|
|
|
|
depends on BROKEN && (Q40 || SUN3X)
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
menu "Platform devices"
|
|
|
|
|
|
|
|
|
|
config HEARTBEAT
|
2011-12-29 12:00:31 -07:00
|
|
|
bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
|
|
|
|
|
default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
help
|
|
|
|
|
Use the power-on LED on your machine as a load meter. The exact
|
|
|
|
|
behavior is platform-dependent, but normally the flash frequency is
|
|
|
|
|
a hyperbolic function of the 5-minute load average.
|
|
|
|
|
|
|
|
|
|
# We have a dedicated heartbeat LED. :-)
|
|
|
|
|
config PROC_HARDWARE
|
|
|
|
|
bool "/proc/hardware support"
|
|
|
|
|
help
|
|
|
|
|
Say Y here to support the /proc/hardware file, which gives you
|
|
|
|
|
access to information about the machine you're running on,
|
|
|
|
|
including the model, CPU, MMU, clock speed, BogoMIPS rating,
|
|
|
|
|
and memory size.
|
|
|
|
|
|
2011-10-25 13:14:10 -06:00
|
|
|
config NATFEAT
|
|
|
|
|
bool "ARAnyM emulator support"
|
|
|
|
|
depends on ATARI
|
|
|
|
|
help
|
|
|
|
|
This option enables support for ARAnyM native features, such as
|
|
|
|
|
access to a disk image as /dev/hda.
|
|
|
|
|
|
|
|
|
|
config NFBLOCK
|
|
|
|
|
tristate "NatFeat block device support"
|
|
|
|
|
depends on BLOCK && NATFEAT
|
|
|
|
|
help
|
|
|
|
|
Say Y to include support for the ARAnyM NatFeat block device
|
|
|
|
|
which allows direct access to the hard drives without using
|
|
|
|
|
the hardware emulation.
|
|
|
|
|
|
|
|
|
|
config NFCON
|
|
|
|
|
tristate "NatFeat console driver"
|
2013-01-17 23:44:22 -07:00
|
|
|
depends on TTY && NATFEAT
|
2011-10-25 13:14:10 -06:00
|
|
|
help
|
|
|
|
|
Say Y to include support for the ARAnyM NatFeat console driver
|
|
|
|
|
which allows the console output to be redirected to the stderr
|
|
|
|
|
output of ARAnyM.
|
|
|
|
|
|
|
|
|
|
config NFETH
|
|
|
|
|
tristate "NatFeat Ethernet support"
|
|
|
|
|
depends on ETHERNET && NATFEAT
|
|
|
|
|
help
|
|
|
|
|
Say Y to include support for the ARAnyM NatFeat network device
|
|
|
|
|
which will emulate a regular ethernet device while presenting an
|
|
|
|
|
ethertap device to the host system.
|
|
|
|
|
|
2013-04-05 18:26:39 -06:00
|
|
|
config ATARI_ETHERNAT
|
|
|
|
|
bool "Atari EtherNAT Ethernet support"
|
|
|
|
|
depends on ATARI
|
|
|
|
|
---help---
|
|
|
|
|
Say Y to include support for the EtherNAT network adapter for the
|
|
|
|
|
CT/60 extension port.
|
|
|
|
|
|
|
|
|
|
To compile the actual ethernet driver, choose Y or M for the SMC91X
|
|
|
|
|
option in the network device section; the module will be called smc91x.
|
|
|
|
|
|
2013-04-05 18:26:40 -06:00
|
|
|
config ATARI_ETHERNEC
|
|
|
|
|
bool "Atari EtherNEC Ethernet support"
|
|
|
|
|
depends on ATARI_ROM_ISA
|
|
|
|
|
---help---
|
|
|
|
|
Say Y to include support for the EtherNEC network adapter for the
|
|
|
|
|
ROM port. The driver works by polling instead of interrupts, so it
|
|
|
|
|
is quite slow.
|
|
|
|
|
|
2014-08-29 08:37:33 -06:00
|
|
|
This driver also supports the ethernet part of the NetUSBee ROM
|
2013-04-05 18:26:40 -06:00
|
|
|
port combined Ethernet/USB adapter.
|
|
|
|
|
|
|
|
|
|
To compile the actual ethernet driver, choose Y or M in for the NE2000
|
|
|
|
|
option in the network device section; the module will be called ne.
|
|
|
|
|
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
endmenu
|
|
|
|
|
|
|
|
|
|
menu "Character devices"
|
|
|
|
|
|
|
|
|
|
config ATARI_DSP56K
|
2012-10-23 14:01:27 -06:00
|
|
|
tristate "Atari DSP56k support"
|
|
|
|
|
depends on ATARI
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
help
|
|
|
|
|
If you want to be able to use the DSP56001 in Falcons, say Y. This
|
|
|
|
|
driver is still experimental, and if you don't know what it is, or
|
|
|
|
|
if you don't have this processor, just say N.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
|
|
|
|
|
|
config AMIGA_BUILTIN_SERIAL
|
|
|
|
|
tristate "Amiga builtin serial support"
|
2014-09-09 03:54:50 -06:00
|
|
|
depends on AMIGA && TTY
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
help
|
|
|
|
|
If you want to use your Amiga's built-in serial port in Linux,
|
|
|
|
|
answer Y.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
|
|
|
|
|
|
config HPDCA
|
|
|
|
|
tristate "HP DCA serial support"
|
|
|
|
|
depends on DIO && SERIAL_8250
|
|
|
|
|
help
|
|
|
|
|
If you want to use the internal "DCA" serial ports on an HP300
|
|
|
|
|
machine, say Y here.
|
|
|
|
|
|
|
|
|
|
config HPAPCI
|
|
|
|
|
tristate "HP APCI serial support"
|
2012-10-23 14:01:27 -06:00
|
|
|
depends on HP300 && SERIAL_8250
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
help
|
|
|
|
|
If you want to use the internal "APCI" serial ports on an HP400
|
|
|
|
|
machine, say Y here.
|
|
|
|
|
|
|
|
|
|
config SERIAL_CONSOLE
|
|
|
|
|
bool "Support for serial port console"
|
2011-12-06 13:16:13 -07:00
|
|
|
depends on AMIGA_BUILTIN_SERIAL=y
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
---help---
|
|
|
|
|
If you say Y here, it will be possible to use a serial port as the
|
|
|
|
|
system console (the system console is the device which receives all
|
|
|
|
|
kernel messages and warnings and which allows logins in single user
|
|
|
|
|
mode). This could be useful if some terminal or printer is connected
|
|
|
|
|
to that serial port.
|
|
|
|
|
|
|
|
|
|
Even if you say Y here, the currently visible virtual console
|
|
|
|
|
(/dev/tty0) will still be used as the system console by default, but
|
|
|
|
|
you can alter that using a kernel command line option such as
|
|
|
|
|
"console=ttyS1". (Try "man bootparam" or see the documentation of
|
2011-12-06 13:16:13 -07:00
|
|
|
your boot loader about how to pass options to the kernel at boot
|
|
|
|
|
time.)
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
|
2011-12-06 13:16:13 -07:00
|
|
|
If you don't have a graphical console and you say Y here, the
|
m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-19 23:49:09 -06:00
|
|
|
kernel will automatically use the first serial line, /dev/ttyS0, as
|
|
|
|
|
system console.
|
|
|
|
|
|
|
|
|
|
If unsure, say N.
|
|
|
|
|
|
|
|
|
|
endmenu
|
|
|
|
|
|
|
|
|
|
endif
|
