Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/include/asm-x86_64/proto.h

144 lines
3.8 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#ifndef _ASM_X8664_PROTO_H
#define _ASM_X8664_PROTO_H 1
#include <asm/ldt.h>
/* misc architecture specific prototypes */
struct cpuinfo_x86;
struct pt_regs;
extern void start_kernel(void);
extern void pda_init(int);
[PATCH] x86_64: Unmap NULL during early bootup We should zap the low mappings, as soon as possible, so that we can catch kernel bugs more effectively. Previously early boot had NULL mapped and didn't trap on NULL references. This patch introduces boot_level4_pgt, which will always have low identity addresses mapped. Druing boot, all the processors will use this as their level4 pgt. On BP, we will switch to init_level4_pgt as soon as we enter C code and zap the low mappings as soon as we are done with the usage of identity low mapped addresses. On AP's we will zap the low mappings as soon as we jump to C code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 09:25:53 -07:00
extern void zap_low_mappings(int cpu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern void early_idt_handler(void);
extern void mcheck_init(struct cpuinfo_x86 *c);
[PATCH] MTRR suspend/resume cleanup There has been some discuss about solving the SMP MTRR suspend/resume breakage, but I didn't find a patch for it. This is an intent for it. The basic idea is moving mtrr initializing into cpu_identify for all APs (so it works for cpu hotplug). For BP, restore_processor_state is responsible for restoring MTRR. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:56:38 -06:00
#ifdef CONFIG_MTRR
extern void mtrr_ap_init(void);
extern void mtrr_bp_init(void);
#else
#define mtrr_ap_init() do {} while (0)
#define mtrr_bp_init() do {} while (0)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern void init_memory_mapping(unsigned long start, unsigned long end);
[PATCH] x86_64: Add 4GB DMA32 zone Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 09:25:53 -07:00
extern void size_zones(unsigned long *z, unsigned long *h,
unsigned long start_pfn, unsigned long end_pfn);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern void system_call(void);
extern int kernel_syscall(void);
extern void syscall_init(void);
extern void ia32_syscall(void);
extern void ia32_cstar_target(void);
extern void ia32_sysenter_target(void);
extern void config_acpi_tables(void);
extern void ia32_syscall(void);
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 22:53:28 -06:00
extern int pmtimer_mark_offset(void);
[PATCH] x86_64: [PATCH] timer resume At resume time, TSC's value or something similar might be changed a lot against suspend time. This could make system gets a very big lost ticks. See http://bugzilla.kernel.org/show_bug.cgi?id=5825 Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:56 -07:00
extern void pmtimer_resume(void);
[PATCH] x86_64: Calibrate APIC timer using PM timer On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:51:41 -07:00
extern void pmtimer_wait(unsigned);
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 22:53:28 -06:00
extern unsigned int do_gettimeoffset_pm(void);
[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not available Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:44 -07:00
#ifdef CONFIG_X86_PM_TIMER
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 22:53:28 -06:00
extern u32 pmtmr_ioport;
[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not available Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:44 -07:00
#else
#define pmtmr_ioport 0
#endif
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 22:53:28 -06:00
extern unsigned long long monotonic_base;
extern int sysctl_vsyscall;
[PATCH] x86_64: Allow to run main time keeping from the local APIC interrupt Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:50 -07:00
extern int nohpet;
extern unsigned long vxtime_hz;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern int numa_setup(char *opt);
extern int setup_early_printk(char *);
extern void early_printk(const char *fmt, ...) __attribute__((format(printf,1,2)));
extern void early_identify_cpu(struct cpuinfo_x86 *c);
extern int k8_scan_nodes(unsigned long start, unsigned long end);
extern void numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn);
extern unsigned long numa_free_all_bootmem(void);
extern void reserve_bootmem_generic(unsigned long phys, unsigned len);
extern void free_bootmem_generic(unsigned long phys, unsigned len);
extern void load_gs_index(unsigned gs);
[PATCH] x86_64: Allow to run main time keeping from the local APIC interrupt Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:50 -07:00
extern void stop_timer_interrupt(void);
extern void main_timer_handler(struct pt_regs *regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern unsigned long end_pfn_map;
[PATCH] x86_64: reliable stack trace support (x86-64) These are the x86_64-specific pieces to enable reliable stack traces. The only restriction with this is that it currently cannot unwind across the interrupt->normal stack boundary, as that transition is lacking proper annotation. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 05:57:32 -06:00
extern void show_trace(struct task_struct *, struct pt_regs *, unsigned long * rsp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern void show_registers(struct pt_regs *regs);
extern void exception_table_check(void);
extern void acpi_reserve_bootmem(void);
extern void swap_low_mappings(void);
extern void __show_regs(struct pt_regs * regs);
extern void show_regs(struct pt_regs * regs);
extern char *syscall32_page;
extern void syscall32_cpu_init(void);
extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end);
extern void check_ioapic(void);
extern void check_efer(void);
extern int unhandled_signal(struct task_struct *tsk, int sig);
[PATCH] x86_64: Don't try to synchronize the TSC over CPUs on Intel CPUs at boot. They already do this in hardware and the Linux algorithm actually adds errors. Cc: mingo@elte.hu Cc: rohit.seth@intel.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:45:15 -07:00
extern int unsynchronized_tsc(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern void select_idle_routine(const struct cpuinfo_x86 *c);
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:44:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern unsigned long table_start, table_end;
extern int exception_trace;
extern int using_apic_timer;
extern int disable_apic;
extern unsigned cpu_khz;
extern int ioapic_force;
extern int skip_ioapic_setup;
extern int acpi_ht;
extern int acpi_disabled;
[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 05:58:11 -06:00
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
[PATCH] x86_64: Calgary IOMMU - introduce iommu_detected swiotlb relies on the gart specific iommu_aperture variable to know if we discovered a hardware IOMMU before swiotlb initialization. Introduce iommu_detected to do the same thing, but in a HW IOMMU neutral manner, in preparation for adding the Calgary HW IOMMU. Signed-Off-By: Muli Ben-Yehuda <muli@il.ibm.com> Signed-Off-By: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 05:58:05 -06:00
extern int iommu_detected;
[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded. - Rename the GART_IOMMU option to IOMMU to make clear it's not just for AMD - Rewrite the help text to better emphatise this fact - Make it an embedded option because too many people get it wrong. To my astonishment I discovered the aacraid driver tests this symbol directly. This looks quite broken to me - it's an internal implementation detail of the PCI DMA API. Can the maintainer please clarify what this test was intended to do? Cc: linux-scsi@vger.kernel.org Cc: alan@redhat.com Cc: markh@osdl.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 05:57:22 -06:00
#ifdef CONFIG_IOMMU
[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 05:58:11 -06:00
extern void gart_iommu_init(void);
extern void gart_parse_options(char *);
extern void iommu_hole_init(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern int fallback_aper_order;
extern int fallback_aper_force;
extern int iommu_aperture;
extern int iommu_aperture_allowed;
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:44:42 -07:00
extern int iommu_aperture_disabled;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern int fix_aperture;
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:44:42 -07:00
#else
#define iommu_aperture 0
#define iommu_aperture_allowed 0
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern int reboot_force;
[PATCH] x86_64: Disable tsc when apicpmtimer is active Otherwise it has no effect anyways. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-16 15:42:07 -07:00
extern int notsc_setup(char *);
[PATCH] x86_64: Fix the additional_cpus=.. option It didn't set up the CPU possible map early enough, so the option didn't actually work. Noticed by Heiko Carstens Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-25 20:18:46 -07:00
extern int setup_additional_cpus(char *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
extern void smp_local_timer_interrupt(struct pt_regs * regs);
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
#define round_up(x,y) (((x) + (y) - 1) & ~((y)-1))
#define round_down(x,y) ((x) & ~((y)-1))
#endif
Reference in a new issue Copy permalink