kernel-fxtec-pro1x/kernel/sys_ni.c

137 lines
3.7 KiB
C
Raw Normal View History

#include <linux/linkage.h>
#include <linux/errno.h>
#include <asm/unistd.h>
/*
* Non-implemented system calls get redirected here.
*/
asmlinkage long sys_ni_syscall(void)
{
return -ENOSYS;
}
cond_syscall(sys_nfsservctl);
cond_syscall(sys_quotactl);
cond_syscall(sys_acct);
cond_syscall(sys_lookup_dcookie);
cond_syscall(sys_swapon);
cond_syscall(sys_swapoff);
cond_syscall(sys_kexec_load);
cond_syscall(compat_sys_kexec_load);
cond_syscall(sys_init_module);
cond_syscall(sys_delete_module);
cond_syscall(sys_socketpair);
cond_syscall(sys_bind);
cond_syscall(sys_listen);
cond_syscall(sys_accept);
cond_syscall(sys_connect);
cond_syscall(sys_getsockname);
cond_syscall(sys_getpeername);
cond_syscall(sys_sendto);
cond_syscall(sys_send);
cond_syscall(sys_recvfrom);
cond_syscall(sys_recv);
cond_syscall(sys_socket);
cond_syscall(sys_setsockopt);
cond_syscall(sys_getsockopt);
cond_syscall(sys_shutdown);
cond_syscall(sys_sendmsg);
cond_syscall(sys_recvmsg);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
cond_syscall(sys_set_robust_list);
cond_syscall(compat_sys_set_robust_list);
cond_syscall(sys_get_robust_list);
cond_syscall(compat_sys_get_robust_list);
cond_syscall(sys_epoll_create);
cond_syscall(sys_epoll_ctl);
cond_syscall(sys_epoll_wait);
cond_syscall(sys_semget);
cond_syscall(sys_semop);
cond_syscall(sys_semtimedop);
cond_syscall(sys_semctl);
cond_syscall(sys_msgget);
cond_syscall(sys_msgsnd);
cond_syscall(sys_msgrcv);
cond_syscall(sys_msgctl);
cond_syscall(sys_shmget);
cond_syscall(sys_shmat);
cond_syscall(sys_shmdt);
cond_syscall(sys_shmctl);
cond_syscall(sys_mq_open);
cond_syscall(sys_mq_unlink);
cond_syscall(sys_mq_timedsend);
cond_syscall(sys_mq_timedreceive);
cond_syscall(sys_mq_notify);
cond_syscall(sys_mq_getsetattr);
cond_syscall(compat_sys_mq_open);
cond_syscall(compat_sys_mq_timedsend);
cond_syscall(compat_sys_mq_timedreceive);
cond_syscall(compat_sys_mq_notify);
cond_syscall(compat_sys_mq_getsetattr);
cond_syscall(sys_mbind);
cond_syscall(sys_get_mempolicy);
cond_syscall(sys_set_mempolicy);
cond_syscall(compat_sys_mbind);
cond_syscall(compat_sys_get_mempolicy);
cond_syscall(compat_sys_set_mempolicy);
cond_syscall(sys_add_key);
cond_syscall(sys_request_key);
cond_syscall(sys_keyctl);
cond_syscall(compat_sys_keyctl);
cond_syscall(compat_sys_socketcall);
cond_syscall(sys_inotify_init);
cond_syscall(sys_inotify_add_watch);
cond_syscall(sys_inotify_rm_watch);
[PATCH] Swap Migration V5: sys_migrate_pages interface sys_migrate_pages implementation using swap based page migration This is the original API proposed by Ray Bryant in his posts during the first half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org. The intent of sys_migrate is to migrate memory of a process. A process may have migrated to another node. Memory was allocated optimally for the prior context. sys_migrate_pages allows to shift the memory to the new node. sys_migrate_pages is also useful if the processes available memory nodes have changed through cpuset operations to manually move the processes memory. Paul Jackson is working on an automated mechanism that will allow an automatic migration if the cpuset of a process is changed. However, a user may decide to manually control the migration. This implementation is put into the policy layer since it uses concepts and functions that are also needed for mbind and friends. The patch also provides a do_migrate_pages function that may be useful for cpusets to automatically move memory. sys_migrate_pages does not modify policies in contrast to Ray's implementation. The current code here is based on the swap based page migration capability and thus is not able to preserve the physical layout relative to it containing nodeset (which may be a cpuset). When direct page migration becomes available then the implementation needs to be changed to do a isomorphic move of pages between different nodesets. The current implementation simply evicts all pages in source nodeset that are not in the target nodeset. Patch supports ia64, i386 and x86_64. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:00:51 -07:00
cond_syscall(sys_migrate_pages);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 03:03:55 -06:00
cond_syscall(sys_move_pages);
cond_syscall(sys_chown16);
cond_syscall(sys_fchown16);
cond_syscall(sys_getegid16);
cond_syscall(sys_geteuid16);
cond_syscall(sys_getgid16);
cond_syscall(sys_getgroups16);
cond_syscall(sys_getresgid16);
cond_syscall(sys_getresuid16);
cond_syscall(sys_getuid16);
cond_syscall(sys_lchown16);
cond_syscall(sys_setfsgid16);
cond_syscall(sys_setfsuid16);
cond_syscall(sys_setgid16);
cond_syscall(sys_setgroups16);
cond_syscall(sys_setregid16);
cond_syscall(sys_setresgid16);
cond_syscall(sys_setresuid16);
cond_syscall(sys_setreuid16);
cond_syscall(sys_setuid16);
cond_syscall(sys_vm86old);
cond_syscall(sys_vm86);
cond_syscall(compat_sys_ipc);
cond_syscall(compat_sys_sysctl);
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
cond_syscall(sys_pciconfig_write);
cond_syscall(sys_pciconfig_iobase);
cond_syscall(sys32_ipc);
cond_syscall(sys32_sysctl);
cond_syscall(ppc_rtas);
cond_syscall(sys_spu_run);
cond_syscall(sys_spu_create);
/* mmu depending weak syscall entries */
cond_syscall(sys_mprotect);
cond_syscall(sys_msync);
cond_syscall(sys_mlock);
cond_syscall(sys_munlock);
cond_syscall(sys_mlockall);
cond_syscall(sys_munlockall);
cond_syscall(sys_mincore);
cond_syscall(sys_madvise);
cond_syscall(sys_mremap);
cond_syscall(sys_remap_file_pages);
cond_syscall(compat_sys_move_pages);