kernel-fxtec-pro1x/kernel/sysctl.c

2886 lines
68 KiB
C
Raw Normal View History

/*
* sysctl.c: General linux system control interface
*
* Begun 24 March 1995, Stephen Tweedie
* Added /proc support, Dec 1995
* Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas.
* Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver.
* Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver.
* Dynamic registration fixes, Stephen Tweedie.
* Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn.
* Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris
* Horn.
* Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer.
* Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer.
* Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill
* Wendling.
* The list_for_each() macro wasn't appropriate for the sysctl loop.
* Removed it and replaced it with older style, 03/23/00, Bill Wendling
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
V3 file capabilities: alter behavior of cap_setpcap The non-filesystem capability meaning of CAP_SETPCAP is that a process, p1, can change the capabilities of another process, p2. This is not the meaning that was intended for this capability at all, and this implementation came about purely because, without filesystem capabilities, there was no way to use capabilities without one process bestowing them on another. Since we now have a filesystem support for capabilities we can fix the implementation of CAP_SETPCAP. The most significant thing about this change is that, with it in effect, no process can set the capabilities of another process. The capabilities of a program are set via the capability convolution rules: pI(post-exec) = pI(pre-exec) pP(post-exec) = (X(aka cap_bset) & fP) | (pI(post-exec) & fI) pE(post-exec) = fE ? pP(post-exec) : 0 at exec() time. As such, the only influence the pre-exec() program can have on the post-exec() program's capabilities are through the pI capability set. The correct implementation for CAP_SETPCAP (and that enabled by this patch) is that it can be used to add extra pI capabilities to the current process - to be picked up by subsequent exec()s when the above convolution rules are applied. Here is how it works: Let's say we have a process, p. It has capability sets, pE, pP and pI. Generally, p, can change the value of its own pI to pI' where (pI' & ~pI) & ~pP = 0. That is, the only new things in pI' that were not present in pI need to be present in pP. The role of CAP_SETPCAP is basically to permit changes to pI beyond the above: if (pE & CAP_SETPCAP) { pI' = anything; /* ie., even (pI' & ~pI) & ~pP != 0 */ } This capability is useful for things like login, which (say, via pam_cap) might want to raise certain inheritable capabilities for use by the children of the logged-in user's shell, but those capabilities are not useful to or needed by the login program itself. One such use might be to limit who can run ping. You set the capabilities of the 'ping' program to be "= cap_net_raw+i", and then only shells that have (pI & CAP_NET_RAW) will be able to run it. Without CAP_SETPCAP implemented as described above, login(pam_cap) would have to also have (pP & CAP_NET_RAW) in order to raise this capability and pass it on through the inheritable set. Signed-off-by: Andrew Morgan <morgan@kernel.org> Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 04:05:59 -06:00
#include <linux/security.h>
#include <linux/ctype.h>
#include <linux/utsname.h>
#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kobject.h>
#include <linux/net.h>
#include <linux/sysrq.h>
#include <linux/highuid.h>
#include <linux/writeback.h>
#include <linux/hugetlb.h>
#include <linux/initrd.h>
#include <linux/key.h>
#include <linux/times.h>
#include <linux/limits.h>
#include <linux/dcache.h>
#include <linux/syscalls.h>
#include <linux/vmstat.h>
#include <linux/nfs_fs.h>
#include <linux/acpi.h>
#include <linux/reboot.h>
#include <linux/ftrace.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#ifdef CONFIG_X86
#include <asm/nmi.h>
#include <asm/stacktrace.h>
#include <asm/io.h>
#endif
static int deprecated_sysctl_warning(struct __sysctl_args *args);
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
extern int C_A_D;
extern int print_fatal_signals;
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
extern int sysctl_panic_on_oom;
extern int sysctl_oom_kill_allocating_task;
extern int sysctl_oom_dump_tasks;
extern int max_threads;
extern int core_uses_pid;
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 01:09:43 -06:00
extern int suid_dumpable;
extern char core_pattern[];
extern int pid_max;
extern int min_free_kbytes;
extern int pid_max_min, pid_max_max;
extern int sysctl_drop_caches;
extern int percpu_pagelist_fraction;
extern int compat_log;
extern int maps_protect;
extern int latencytop_enabled;
extern int sysctl_nr_open_min, sysctl_nr_open_max;
#ifdef CONFIG_RCU_TORTURE_TEST
extern int rcutorture_runnable;
#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
/* Constants used for minimum and maximum */
#if defined(CONFIG_HIGHMEM) || defined(CONFIG_DETECT_SOFTLOCKUP)
static int one = 1;
#endif
#ifdef CONFIG_DETECT_SOFTLOCKUP
static int sixty = 60;
static int neg_one = -1;
#endif
#ifdef CONFIG_MMU
static int two = 2;
#endif
static int zero;
static int one_hundred = 100;
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
static int minolduid;
static int min_percpu_pagelist_fract = 8;
static int ngroups_max = NGROUPS_MAX;
#ifdef CONFIG_MODULES
extern char modprobe_path[];
#endif
#ifdef CONFIG_CHR_DEV_SG
extern int sg_big_buff;
#endif
#ifdef __sparc__
extern char reboot_command [];
extern int stop_a_enabled;
extern int scons_pwroff;
#endif
#ifdef __hppa__
extern int pwrsw_enabled;
extern int unaligned_enabled;
#endif
#ifdef CONFIG_S390
#ifdef CONFIG_MATHEMU
extern int sysctl_ieee_emulation_warnings;
#endif
extern int sysctl_userprocess_debug;
extern int spin_retry;
#endif
#ifdef CONFIG_BSD_PROCESS_ACCT
extern int acct_parm[];
#endif
#ifdef CONFIG_IA64
extern int no_unaligned_warning;
#endif
#ifdef CONFIG_RT_MUTEXES
extern int max_lock_depth;
#endif
#ifdef CONFIG_PROC_SYSCTL
static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
#endif
static struct ctl_table root_table[];
static struct ctl_table_root sysctl_table_root;
static struct ctl_table_header root_table_header = {
.ctl_table = root_table,
.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.header_list),
.root = &sysctl_table_root,
};
static struct ctl_table_root sysctl_table_root = {
.root_list = LIST_HEAD_INIT(sysctl_table_root.root_list),
.header_list = LIST_HEAD_INIT(root_table_header.ctl_entry),
};
static struct ctl_table kern_table[];
static struct ctl_table vm_table[];
static struct ctl_table fs_table[];
static struct ctl_table debug_table[];
static struct ctl_table dev_table[];
extern struct ctl_table random_table[];
#ifdef CONFIG_INOTIFY_USER
extern struct ctl_table inotify_table[];
#endif
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
#endif
lockstat: core infrastructure Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 02:48:56 -06:00
extern int prove_locking;
extern int lock_stat;
/* The default sysctl tables: */
static struct ctl_table root_table[] = {
{
.ctl_name = CTL_KERN,
.procname = "kernel",
.mode = 0555,
.child = kern_table,
},
{
.ctl_name = CTL_VM,
.procname = "vm",
.mode = 0555,
.child = vm_table,
},
{
.ctl_name = CTL_FS,
.procname = "fs",
.mode = 0555,
.child = fs_table,
},
{
.ctl_name = CTL_DEBUG,
.procname = "debug",
.mode = 0555,
.child = debug_table,
},
{
.ctl_name = CTL_DEV,
.procname = "dev",
.mode = 0555,
.child = dev_table,
},
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
{ .ctl_name = 0 }
};
#ifdef CONFIG_SCHED_DEBUG
static int min_sched_granularity_ns = 100000; /* 100 usecs */
static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */
static int min_wakeup_granularity_ns; /* 0 usecs */
static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */
#endif
static struct ctl_table kern_table[] = {
#ifdef CONFIG_SCHED_DEBUG
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_min_granularity_ns",
.data = &sysctl_sched_min_granularity,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &sched_nr_latency_handler,
.strategy = &sysctl_intvec,
.extra1 = &min_sched_granularity_ns,
.extra2 = &max_sched_granularity_ns,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_latency_ns",
.data = &sysctl_sched_latency,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &sched_nr_latency_handler,
.strategy = &sysctl_intvec,
.extra1 = &min_sched_granularity_ns,
.extra2 = &max_sched_granularity_ns,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_wakeup_granularity_ns",
.data = &sysctl_sched_wakeup_granularity,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &min_wakeup_granularity_ns,
.extra2 = &max_wakeup_granularity_ns,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_shares_ratelimit",
.data = &sysctl_sched_shares_ratelimit,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_child_runs_first",
.data = &sysctl_sched_child_runs_first,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_features",
.data = &sysctl_sched_features,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_migration_cost",
.data = &sysctl_sched_migration_cost,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_nr_migrate",
.data = &sysctl_sched_nr_migrate,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_rt_period_us",
.data = &sysctl_sched_rt_period,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &sched_rt_handler,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_rt_runtime_us",
.data = &sysctl_sched_rt_runtime,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &sched_rt_handler,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_compat_yield",
.data = &sysctl_sched_compat_yield,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
lockstat: core infrastructure Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 02:48:56 -06:00
#ifdef CONFIG_PROVE_LOCKING
{
.ctl_name = CTL_UNNUMBERED,
.procname = "prove_locking",
.data = &prove_locking,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_LOCK_STAT
{
.ctl_name = CTL_UNNUMBERED,
.procname = "lock_stat",
.data = &lock_stat,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_PANIC,
.procname = "panic",
.data = &panic_timeout,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_CORE_USES_PID,
.procname = "core_uses_pid",
.data = &core_uses_pid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_CORE_PATTERN,
.procname = "core_pattern",
.data = core_pattern,
.maxlen = CORENAME_MAX_SIZE,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "tainted",
.data = &tainted,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_taint,
},
#endif
#ifdef CONFIG_LATENCYTOP
{
.procname = "latencytop",
.data = &latencytop_enabled,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_BLK_DEV_INITRD
{
.ctl_name = KERN_REALROOTDEV,
.procname = "real-root-dev",
.data = &real_root_dev,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = CTL_UNNUMBERED,
.procname = "print-fatal-signals",
.data = &print_fatal_signals,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#ifdef __sparc__
{
.ctl_name = KERN_SPARC_REBOOT,
.procname = "reboot-cmd",
.data = reboot_command,
.maxlen = 256,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
{
.ctl_name = KERN_SPARC_STOP_A,
.procname = "stop-a",
.data = &stop_a_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_SPARC_SCONS_PWROFF,
.procname = "scons-poweroff",
.data = &scons_pwroff,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef __hppa__
{
.ctl_name = KERN_HPPA_PWRSW,
.procname = "soft-power",
.data = &pwrsw_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_HPPA_UNALIGNED,
.procname = "unaligned-trap",
.data = &unaligned_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_CTLALTDEL,
.procname = "ctrl-alt-del",
.data = &C_A_D,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#ifdef CONFIG_FTRACE
{
.ctl_name = CTL_UNNUMBERED,
.procname = "ftrace_enabled",
.data = &ftrace_enabled,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &ftrace_enable_sysctl,
},
#endif
#ifdef CONFIG_MODULES
{
.ctl_name = KERN_MODPROBE,
.procname = "modprobe",
.data = &modprobe_path,
.maxlen = KMOD_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#endif
#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
{
.ctl_name = KERN_HOTPLUG,
.procname = "hotplug",
.data = &uevent_helper,
.maxlen = UEVENT_HELPER_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#endif
#ifdef CONFIG_CHR_DEV_SG
{
.ctl_name = KERN_SG_BIG_BUFF,
.procname = "sg-big-buff",
.data = &sg_big_buff,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_BSD_PROCESS_ACCT
{
.ctl_name = KERN_ACCT,
.procname = "acct",
.data = &acct_parm,
.maxlen = 3*sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_MAGIC_SYSRQ
{
.ctl_name = KERN_SYSRQ,
.procname = "sysrq",
.data = &__sysrq_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "cad_pid",
.data = NULL,
.maxlen = sizeof (int),
.mode = 0600,
.proc_handler = &proc_do_cad_pid,
},
#endif
{
.ctl_name = KERN_MAX_THREADS,
.procname = "threads-max",
.data = &max_threads,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_RANDOM,
.procname = "random",
.mode = 0555,
.child = random_table,
},
{
.ctl_name = KERN_OVERFLOWUID,
.procname = "overflowuid",
.data = &overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = KERN_OVERFLOWGID,
.procname = "overflowgid",
.data = &overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
#ifdef CONFIG_S390
#ifdef CONFIG_MATHEMU
{
.ctl_name = KERN_IEEE_EMULATION_WARNINGS,
.procname = "ieee_emulation_warnings",
.data = &sysctl_ieee_emulation_warnings,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_S390_USER_DEBUG_LOGGING,
.procname = "userprocess_debug",
.data = &sysctl_userprocess_debug,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_PIDMAX,
.procname = "pid_max",
.data = &pid_max,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = sysctl_intvec,
.extra1 = &pid_max_min,
.extra2 = &pid_max_max,
},
{
.ctl_name = KERN_PANIC_ON_OOPS,
.procname = "panic_on_oops",
.data = &panic_on_oops,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#if defined CONFIG_PRINTK
{
.ctl_name = KERN_PRINTK,
.procname = "printk",
.data = &console_loglevel,
.maxlen = 4*sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_PRINTK_RATELIMIT,
.procname = "printk_ratelimit",
.data = &printk_ratelimit_state.interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
{
.ctl_name = KERN_PRINTK_RATELIMIT_BURST,
.procname = "printk_ratelimit_burst",
.data = &printk_ratelimit_state.burst,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_NGROUPS_MAX,
.procname = "ngroups_max",
.data = &ngroups_max,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
{
.ctl_name = KERN_UNKNOWN_NMI_PANIC,
.procname = "unknown_nmi_panic",
.data = &unknown_nmi_panic,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.procname = "nmi_watchdog",
.data = &nmi_watchdog_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_nmi_enabled,
},
#endif
#if defined(CONFIG_X86)
{
.ctl_name = KERN_PANIC_ON_NMI,
.procname = "panic_on_unrecovered_nmi",
.data = &panic_on_unrecovered_nmi,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_BOOTLOADER_TYPE,
.procname = "bootloader_type",
.data = &bootloader_type,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "kstack_depth_to_print",
.data = &kstack_depth_to_print,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "io_delay_type",
.data = &io_delay_type,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#if defined(CONFIG_MMU)
{
.ctl_name = KERN_RANDOMIZE,
.procname = "randomize_va_space",
.data = &randomize_va_space,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#if defined(CONFIG_S390) && defined(CONFIG_SMP)
{
.ctl_name = KERN_SPIN_RETRY,
.procname = "spin_retry",
.data = &spin_retry,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#if defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
{
.procname = "acpi_video_flags",
.data = &acpi_realmode_flags,
.maxlen = sizeof (unsigned long),
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
},
#endif
#ifdef CONFIG_IA64
{
.ctl_name = KERN_IA64_UNALIGNED,
.procname = "ignore-unaligned-usertrap",
.data = &no_unaligned_warning,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_DETECT_SOFTLOCKUP
{
.ctl_name = CTL_UNNUMBERED,
.procname = "softlockup_panic",
.data = &softlockup_panic,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "softlockup_thresh",
.data = &softlockup_thresh,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &neg_one,
.extra2 = &sixty,
},
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hung_task_check_count",
.data = &sysctl_hung_task_check_count,
.maxlen = sizeof(unsigned long),
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
.strategy = &sysctl_intvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hung_task_timeout_secs",
.data = &sysctl_hung_task_timeout_secs,
.maxlen = sizeof(unsigned long),
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
.strategy = &sysctl_intvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hung_task_warnings",
.data = &sysctl_hung_task_warnings,
.maxlen = sizeof(unsigned long),
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 13:08:02 -07:00
.strategy = &sysctl_intvec,
},
#endif
#ifdef CONFIG_COMPAT
{
.ctl_name = KERN_COMPAT_LOG,
.procname = "compat-log",
.data = &compat_log,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_RT_MUTEXES
{
.ctl_name = KERN_MAX_LOCK_DEPTH,
.procname = "max_lock_depth",
.data = &max_lock_depth,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_PROC_FS
{
.ctl_name = CTL_UNNUMBERED,
.procname = "maps_protect",
.data = &maps_protect,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = CTL_UNNUMBERED,
.procname = "poweroff_cmd",
.data = &poweroff_cmd,
.maxlen = POWEROFF_CMD_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#ifdef CONFIG_KEYS
{
.ctl_name = CTL_UNNUMBERED,
.procname = "keys",
.mode = 0555,
.child = key_sysctls,
},
#endif
#ifdef CONFIG_RCU_TORTURE_TEST
{
.ctl_name = CTL_UNNUMBERED,
.procname = "rcutorture_runnable",
.data = &rcutorture_runnable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
{ .ctl_name = 0 }
};
static struct ctl_table vm_table[] = {
{
.ctl_name = VM_OVERCOMMIT_MEMORY,
.procname = "overcommit_memory",
.data = &sysctl_overcommit_memory,
.maxlen = sizeof(sysctl_overcommit_memory),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_PANIC_ON_OOM,
.procname = "panic_on_oom",
.data = &sysctl_panic_on_oom,
.maxlen = sizeof(sysctl_panic_on_oom),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "oom_kill_allocating_task",
.data = &sysctl_oom_kill_allocating_task,
.maxlen = sizeof(sysctl_oom_kill_allocating_task),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "oom_dump_tasks",
.data = &sysctl_oom_dump_tasks,
.maxlen = sizeof(sysctl_oom_dump_tasks),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_OVERCOMMIT_RATIO,
.procname = "overcommit_ratio",
.data = &sysctl_overcommit_ratio,
.maxlen = sizeof(sysctl_overcommit_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_PAGE_CLUSTER,
.procname = "page-cluster",
.data = &page_cluster,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_DIRTY_BACKGROUND,
.procname = "dirty_background_ratio",
.data = &dirty_background_ratio,
.maxlen = sizeof(dirty_background_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
{
.ctl_name = VM_DIRTY_RATIO,
.procname = "dirty_ratio",
.data = &vm_dirty_ratio,
.maxlen = sizeof(vm_dirty_ratio),
.mode = 0644,
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 00:25:50 -06:00
.proc_handler = &dirty_ratio_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
{
.procname = "dirty_writeback_centisecs",
.data = &dirty_writeback_interval,
.maxlen = sizeof(dirty_writeback_interval),
.mode = 0644,
.proc_handler = &dirty_writeback_centisecs_handler,
},
{
.procname = "dirty_expire_centisecs",
.data = &dirty_expire_interval,
.maxlen = sizeof(dirty_expire_interval),
.mode = 0644,
.proc_handler = &proc_dointvec_userhz_jiffies,
},
{
.ctl_name = VM_NR_PDFLUSH_THREADS,
.procname = "nr_pdflush_threads",
.data = &nr_pdflush_threads,
.maxlen = sizeof nr_pdflush_threads,
.mode = 0444 /* read-only*/,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_SWAPPINESS,
.procname = "swappiness",
.data = &vm_swappiness,
.maxlen = sizeof(vm_swappiness),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
#ifdef CONFIG_HUGETLB_PAGE
{
.procname = "nr_hugepages",
.data = NULL,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = &hugetlb_sysctl_handler,
.extra1 = (void *)&hugetlb_zero,
.extra2 = (void *)&hugetlb_infinity,
},
{
.ctl_name = VM_HUGETLB_GROUP,
.procname = "hugetlb_shm_group",
.data = &sysctl_hugetlb_shm_group,
.maxlen = sizeof(gid_t),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hugepages_treat_as_movable",
.data = &hugepages_treat_as_movable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &hugetlb_treat_movable_handler,
},
hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 17:20:12 -07:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "nr_overcommit_hugepages",
.data = NULL,
.maxlen = sizeof(unsigned long),
hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 17:20:12 -07:00
.mode = 0644,
.proc_handler = &hugetlb_overcommit_handler,
.extra1 = (void *)&hugetlb_zero,
.extra2 = (void *)&hugetlb_infinity,
hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 17:20:12 -07:00
},
#endif
{
.ctl_name = VM_LOWMEM_RESERVE_RATIO,
.procname = "lowmem_reserve_ratio",
.data = &sysctl_lowmem_reserve_ratio,
.maxlen = sizeof(sysctl_lowmem_reserve_ratio),
.mode = 0644,
.proc_handler = &lowmem_reserve_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
},
{
.ctl_name = VM_DROP_PAGECACHE,
.procname = "drop_caches",
.data = &sysctl_drop_caches,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = drop_caches_sysctl_handler,
.strategy = &sysctl_intvec,
},
{
.ctl_name = VM_MIN_FREE_KBYTES,
.procname = "min_free_kbytes",
.data = &min_free_kbytes,
.maxlen = sizeof(min_free_kbytes),
.mode = 0644,
.proc_handler = &min_free_kbytes_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_PERCPU_PAGELIST_FRACTION,
.procname = "percpu_pagelist_fraction",
.data = &percpu_pagelist_fraction,
.maxlen = sizeof(percpu_pagelist_fraction),
.mode = 0644,
.proc_handler = &percpu_pagelist_fraction_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &min_percpu_pagelist_fract,
},
#ifdef CONFIG_MMU
{
.ctl_name = VM_MAX_MAP_COUNT,
.procname = "max_map_count",
.data = &sysctl_max_map_count,
.maxlen = sizeof(sysctl_max_map_count),
.mode = 0644,
.proc_handler = &proc_dointvec
},
#endif
{
.ctl_name = VM_LAPTOP_MODE,
.procname = "laptop_mode",
.data = &laptop_mode,
.maxlen = sizeof(laptop_mode),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
{
.ctl_name = VM_BLOCK_DUMP,
.procname = "block_dump",
.data = &block_dump,
.maxlen = sizeof(block_dump),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_VFS_CACHE_PRESSURE,
.procname = "vfs_cache_pressure",
.data = &sysctl_vfs_cache_pressure,
.maxlen = sizeof(sysctl_vfs_cache_pressure),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
{
.ctl_name = VM_LEGACY_VA_LAYOUT,
.procname = "legacy_va_layout",
.data = &sysctl_legacy_va_layout,
.maxlen = sizeof(sysctl_legacy_va_layout),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#endif
#ifdef CONFIG_NUMA
{
.ctl_name = VM_ZONE_RECLAIM_MODE,
.procname = "zone_reclaim_mode",
.data = &zone_reclaim_mode,
.maxlen = sizeof(zone_reclaim_mode),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_MIN_UNMAPPED,
.procname = "min_unmapped_ratio",
.data = &sysctl_min_unmapped_ratio,
.maxlen = sizeof(sysctl_min_unmapped_ratio),
.mode = 0644,
.proc_handler = &sysctl_min_unmapped_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 00:31:52 -06:00
{
.ctl_name = VM_MIN_SLAB,
.procname = "min_slab_ratio",
.data = &sysctl_min_slab_ratio,
.maxlen = sizeof(sysctl_min_slab_ratio),
.mode = 0644,
.proc_handler = &sysctl_min_slab_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 03:53:50 -06:00
#endif
#ifdef CONFIG_SMP
{
.ctl_name = CTL_UNNUMBERED,
.procname = "stat_interval",
.data = &sysctl_stat_interval,
.maxlen = sizeof(sysctl_stat_interval),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
#endif
#ifdef CONFIG_SECURITY
{
.ctl_name = CTL_UNNUMBERED,
.procname = "mmap_min_addr",
.data = &mmap_min_addr,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
},
#endif
change zonelist order: zonelist order selection logic Make zonelist creation policy selectable from sysctl/boot option v6. This patch makes NUMA's zonelist (of pgdat) order selectable. Available order are Default(automatic)/ Node-based / Zone-based. [Default Order] The kernel selects Node-based or Zone-based order automatically. [Node-based Order] This policy treats the locality of memory as the most important parameter. Zonelist order is created by each zone's locality. This means lower zones (ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion. IOW. ZONE_DMA will be in the middle of zonelist. current 2.6.21 kernel uses this. Pros. * A user can expect local memory as much as possible. Cons. * lower zone will be exhansted before higher zone. This may cause OOM_KILL. Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL because of ZONE_DMA exhaution and you need the best locality. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. [Zone-based order] This policy treats the zone type as the most important parameter. Zonelist order is created by zone-type order. This means lower zone never be used bofere higher zone exhaustion. IOW. ZONE_DMA will be always at the tail of zonelist. Pros. * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted. Cons. * memory locality may not be best. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. bootoption "numa_zonelist_order=" and proc/sysctl is supporetd. command: %echo N > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Node-based order. command: %echo Z > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Zone-based order. Thanks to Lee Schermerhorn, he gives me much help and codes. [Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order] [akpm@linux-foundation.org: build fix] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 00:38:01 -06:00
#ifdef CONFIG_NUMA
{
.ctl_name = CTL_UNNUMBERED,
.procname = "numa_zonelist_order",
.data = &numa_zonelist_order,
.maxlen = NUMA_ZONELIST_ORDER_LEN,
.mode = 0644,
.proc_handler = &numa_zonelist_order_handler,
.strategy = &sysctl_string,
},
#endif
#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
(defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 03:53:50 -06:00
{
.ctl_name = VM_VDSO_ENABLED,
.procname = "vdso_enabled",
.data = &vdso_enabled,
.maxlen = sizeof(vdso_enabled),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#endif
#ifdef CONFIG_HIGHMEM
{
.ctl_name = CTL_UNNUMBERED,
.procname = "highmem_is_dirtyable",
.data = &vm_highmem_is_dirtyable,
.maxlen = sizeof(vm_highmem_is_dirtyable),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one,
},
#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
{ .ctl_name = 0 }
};
#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
static struct ctl_table binfmt_misc_table[] = {
{ .ctl_name = 0 }
};
#endif
static struct ctl_table fs_table[] = {
{
.ctl_name = FS_NRINODE,
.procname = "inode-nr",
.data = &inodes_stat,
.maxlen = 2*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_STATINODE,
.procname = "inode-state",
.data = &inodes_stat,
.maxlen = 7*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.procname = "file-nr",
.data = &files_stat,
.maxlen = 3*sizeof(int),
.mode = 0444,
.proc_handler = &proc_nr_files,
},
{
.ctl_name = FS_MAXFILE,
.procname = "file-max",
.data = &files_stat.max_files,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "nr_open",
.data = &sysctl_nr_open,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.extra1 = &sysctl_nr_open_min,
.extra2 = &sysctl_nr_open_max,
},
{
.ctl_name = FS_DENTRY,
.procname = "dentry-state",
.data = &dentry_stat,
.maxlen = 6*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_OVERFLOWUID,
.procname = "overflowuid",
.data = &fs_overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = FS_OVERFLOWGID,
.procname = "overflowgid",
.data = &fs_overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = FS_LEASES,
.procname = "leases-enable",
.data = &leases_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#ifdef CONFIG_DNOTIFY
{
.ctl_name = FS_DIR_NOTIFY,
.procname = "dir-notify-enable",
.data = &dir_notify_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_MMU
{
.ctl_name = FS_LEASE_TIME,
.procname = "lease-break-time",
.data = &lease_break_time,
.maxlen = sizeof(int),
.mode = 0644,
coredump masking: bound suid_dumpable sysctl This patch series is version 5 of the core dump masking feature, which controls which VMAs should be dumped based on their memory types and per-process flags. I adopted most of Andrew's suggestion at the previous version. He also suggested using system call instead of /proc/<pid>/ interface, I decided to use the latter continuously because adding new system call with pid argument will give a big impact on the kernel. You can access the per-process flags via /proc/<pid>/coredump_filter interface. coredump_filter represents a bitmask of memory types, and if a bit is set, VMAs of corresponding memory type are written into a core file when the process is dumped. The bitmask is inherited from the parent process when a process is created. The original purpose is to avoid longtime system slowdown when a number of processes which share a huge shared memory are dumped at the same time. To achieve this purpose, this patch series adds an ability to suppress dumping anonymous shared memory for specified processes. In this version, three other memory types are also supported. Here are the coredump_filter bits: bit 0: anonymous private memory bit 1: anonymous shared memory bit 2: file-backed private memory bit 3: file-backed shared memory The default value of coredump_filter is 0x3. This means the new core dump routine has the same behavior as conventional behavior by default. In this version, coredump_filter bits and mm.dumpable are merged into mm.flags, and it is accessed by atomic bitops. The supported core file formats are ELF and ELF-FDPIC. ELF has been tested, but ELF-FDPIC has not been built and tested because I don't have the test environment. This patch limits a value of suid_dumpable sysctl to the range of 0 to 2. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 02:48:26 -06:00
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &two,
},
{
.procname = "aio-nr",
.data = &aio_nr,
.maxlen = sizeof(aio_nr),
.mode = 0444,
.proc_handler = &proc_doulongvec_minmax,
},
{
.procname = "aio-max-nr",
.data = &aio_max_nr,
.maxlen = sizeof(aio_max_nr),
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
},
#ifdef CONFIG_INOTIFY_USER
{
.ctl_name = FS_INOTIFY,
.procname = "inotify",
.mode = 0555,
.child = inotify_table,
},
#endif
#endif
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 01:09:43 -06:00
{
.ctl_name = KERN_SETUID_DUMPABLE,
.procname = "suid_dumpable",
.data = &suid_dumpable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
{
.ctl_name = CTL_UNNUMBERED,
.procname = "binfmt_misc",
.mode = 0555,
.child = binfmt_misc_table,
},
#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
{ .ctl_name = 0 }
};
static struct ctl_table debug_table[] = {
#if defined(CONFIG_X86) || defined(CONFIG_PPC)
{
.ctl_name = CTL_UNNUMBERED,
.procname = "exception-trace",
.data = &show_unhandled_signals,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
#endif
{ .ctl_name = 0 }
};
static struct ctl_table dev_table[] = {
{ .ctl_name = 0 }
};
static DEFINE_SPINLOCK(sysctl_lock);
/* called under sysctl_lock */
static int use_table(struct ctl_table_header *p)
{
if (unlikely(p->unregistering))
return 0;
p->used++;
return 1;
}
/* called under sysctl_lock */
static void unuse_table(struct ctl_table_header *p)
{
if (!--p->used)
if (unlikely(p->unregistering))
complete(p->unregistering);
}
/* called under sysctl_lock, will reacquire if has to wait */
static void start_unregistering(struct ctl_table_header *p)
{
/*
* if p->used is 0, nobody will ever touch that entry again;
* we'll eliminate all paths to it before dropping sysctl_lock
*/
if (unlikely(p->used)) {
struct completion wait;
init_completion(&wait);
p->unregistering = &wait;
spin_unlock(&sysctl_lock);
wait_for_completion(&wait);
spin_lock(&sysctl_lock);
}
/*
* do not remove from the list until nobody holds it; walking the
* list in do_sysctl() relies on that.
*/
list_del_init(&p->ctl_entry);
}
void sysctl_head_finish(struct ctl_table_header *head)
{
if (!head)
return;
spin_lock(&sysctl_lock);
unuse_table(head);
spin_unlock(&sysctl_lock);
}
static struct list_head *
lookup_header_list(struct ctl_table_root *root, struct nsproxy *namespaces)
{
struct list_head *header_list;
header_list = &root->header_list;
if (root->lookup)
header_list = root->lookup(root, namespaces);
return header_list;
}
struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
struct ctl_table_header *prev)
{
struct ctl_table_root *root;
struct list_head *header_list;
struct ctl_table_header *head;
struct list_head *tmp;
spin_lock(&sysctl_lock);
if (prev) {
head = prev;
tmp = &prev->ctl_entry;
unuse_table(prev);
goto next;
}
tmp = &root_table_header.ctl_entry;
for (;;) {
head = list_entry(tmp, struct ctl_table_header, ctl_entry);
if (!use_table(head))
goto next;
spin_unlock(&sysctl_lock);
return head;
next:
root = head->root;
tmp = tmp->next;
header_list = lookup_header_list(root, namespaces);
if (tmp != header_list)
continue;
do {
root = list_entry(root->root_list.next,
struct ctl_table_root, root_list);
if (root == &sysctl_table_root)
goto out;
header_list = lookup_header_list(root, namespaces);
} while (list_empty(header_list));
tmp = header_list->next;
}
out:
spin_unlock(&sysctl_lock);
return NULL;
}
struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev)
{
return __sysctl_head_next(current->nsproxy, prev);
}
void register_sysctl_root(struct ctl_table_root *root)
{
spin_lock(&sysctl_lock);
list_add_tail(&root->root_list, &sysctl_table_root.root_list);
spin_unlock(&sysctl_lock);
}
#ifdef CONFIG_SYSCTL_SYSCALL
/* Perform the actual read/write of a sysctl table entry. */
static int do_sysctl_strategy(struct ctl_table_root *root,
struct ctl_table *table,
int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
int op = 0, rc;
if (oldval)
op |= 004;
if (newval)
op |= 002;
if (sysctl_perm(root, table, op))
return -EPERM;
if (table->strategy) {
rc = table->strategy(table, name, nlen, oldval, oldlenp,
newval, newlen);
if (rc < 0)
return rc;
if (rc > 0)
return 0;
}
/* If there is no strategy routine, or if the strategy returns
* zero, proceed with automatic r/w */
if (table->data && table->maxlen) {
rc = sysctl_data(table, name, nlen, oldval, oldlenp,
newval, newlen);
if (rc < 0)
return rc;
}
return 0;
}
static int parse_table(int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen,
struct ctl_table_root *root,
struct ctl_table *table)
{
int n;
repeat:
if (!nlen)
return -ENOTDIR;
if (get_user(n, name))
return -EFAULT;
for ( ; table->ctl_name || table->procname; table++) {
if (!table->ctl_name)
continue;
if (n == table->ctl_name) {
int error;
if (table->child) {
if (sysctl_perm(root, table, 001))
return -EPERM;
name++;
nlen--;
table = table->child;
goto repeat;
}
error = do_sysctl_strategy(root, table, name, nlen,
oldval, oldlenp,
newval, newlen);
return error;
}
}
return -ENOTDIR;
}
int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
struct ctl_table_header *head;
int error = -ENOTDIR;
if (nlen <= 0 || nlen >= CTL_MAXNAME)
return -ENOTDIR;
if (oldval) {
int old_len;
if (!oldlenp || get_user(old_len, oldlenp))
return -EFAULT;
}
for (head = sysctl_head_next(NULL); head;
head = sysctl_head_next(head)) {
error = parse_table(name, nlen, oldval, oldlenp,
newval, newlen,
head->root, head->ctl_table);
if (error != -ENOTDIR) {
sysctl_head_finish(head);
break;
}
}
return error;
}
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
struct __sysctl_args tmp;
int error;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
error = deprecated_sysctl_warning(&tmp);
if (error)
goto out;
lock_kernel();
error = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, tmp.oldlenp,
tmp.newval, tmp.newlen);
unlock_kernel();
out:
return error;
}
#endif /* CONFIG_SYSCTL_SYSCALL */
/*
* sysctl_perm does NOT grant the superuser all rights automatically, because
* some sysctl variables are readonly even to root.
*/
static int test_perm(int mode, int op)
{
if (!current->euid)
mode >>= 6;
else if (in_egroup_p(0))
mode >>= 3;
if ((mode & op & 0007) == op)
return 0;
return -EACCES;
}
int sysctl_perm(struct ctl_table_root *root, struct ctl_table *table, int op)
{
int error;
int mode;
error = security_sysctl(table, op);
if (error)
return error;
if (root->permissions)
mode = root->permissions(root, current->nsproxy, table);
else
mode = table->mode;
return test_perm(mode, op);
}
static void sysctl_set_parent(struct ctl_table *parent, struct ctl_table *table)
{
for (; table->ctl_name || table->procname; table++) {
table->parent = parent;
if (table->child)
sysctl_set_parent(table, table->child);
}
}
static __init int sysctl_init(void)
{
sysctl_set_parent(NULL, root_table);
#ifdef CONFIG_SYSCTL_SYSCALL_CHECK
{
int err;
err = sysctl_check_table(current->nsproxy, root_table);
}
#endif
return 0;
}
core_initcall(sysctl_init);
/**
* __register_sysctl_paths - register a sysctl hierarchy
* @root: List of sysctl headers to register on
* @namespaces: Data to compute which lists of sysctl entries are visible
* @path: The path to the directory the sysctl table is in.
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
* array. A completely 0 filled entry terminates the table.
*
* The members of the &struct ctl_table structure are used as follows:
*
* ctl_name - This is the numeric sysctl value used by sysctl(2). The number
* must be unique within that level of sysctl
*
* procname - the name of the sysctl file under /proc/sys. Set to %NULL to not
* enter a sysctl file
*
* data - a pointer to data for use by proc_handler
*
* maxlen - the maximum size in bytes of the data
*
* mode - the file permissions for the /proc/sys file, and for sysctl(2)
*
* child - a pointer to the child sysctl table if this entry is a directory, or
* %NULL.
*
* proc_handler - the text handler routine (described below)
*
* strategy - the strategy routine (described below)
*
* de - for internal use by the sysctl routines
*
* extra1, extra2 - extra pointers usable by the proc handler routines
*
* Leaf nodes in the sysctl tree will be represented by a single file
* under /proc; non-leaf nodes will be represented by directories.
*
* sysctl(2) can automatically manage read and write requests through
* the sysctl table. The data and maxlen fields of the ctl_table
* struct enable minimal validation of the values being written to be
* performed, and the mode field allows minimal authentication.
*
* More sophisticated management can be enabled by the provision of a
* strategy routine with the table entry. This will be called before
* any automatic read or write of the data is performed.
*
* The strategy routine may return
*
* < 0 - Error occurred (error is passed to user process)
*
* 0 - OK - proceed with automatic read or write.
*
* > 0 - OK - read or write has been done by the strategy routine, so
* return immediately.
*
* There must be a proc_handler routine for any terminal nodes
* mirrored under /proc/sys (non-terminals are handled by a built-in
* directory handler). Several default handlers are available to
* cover common cases -
*
* proc_dostring(), proc_dointvec(), proc_dointvec_jiffies(),
* proc_dointvec_userhz_jiffies(), proc_dointvec_minmax(),
* proc_doulongvec_ms_jiffies_minmax(), proc_doulongvec_minmax()
*
* It is the handler's job to read the input buffer from user memory
* and process it. The handler should return 0 on success.
*
* This routine returns %NULL on a failure to register, and a pointer
* to the table header on success.
*/
struct ctl_table_header *__register_sysctl_paths(
struct ctl_table_root *root,
struct nsproxy *namespaces,
const struct ctl_path *path, struct ctl_table *table)
{
struct list_head *header_list;
struct ctl_table_header *header;
struct ctl_table *new, **prevp;
unsigned int n, npath;
/* Count the path components */
for (npath = 0; path[npath].ctl_name || path[npath].procname; ++npath)
;
/*
* For each path component, allocate a 2-element ctl_table array.
* The first array element will be filled with the sysctl entry
* for this, the second will be the sentinel (ctl_name == 0).
*
* We allocate everything in one go so that we don't have to
* worry about freeing additional memory in unregister_sysctl_table.
*/
header = kzalloc(sizeof(struct ctl_table_header) +
(2 * npath * sizeof(struct ctl_table)), GFP_KERNEL);
if (!header)
return NULL;
new = (struct ctl_table *) (header + 1);
/* Now connect the dots */
prevp = &header->ctl_table;
for (n = 0; n < npath; ++n, ++path) {
/* Copy the procname */
new->procname = path->procname;
new->ctl_name = path->ctl_name;
new->mode = 0555;
*prevp = new;
prevp = &new->child;
new += 2;
}
*prevp = table;
header->ctl_table_arg = table;
INIT_LIST_HEAD(&header->ctl_entry);
header->used = 0;
header->unregistering = NULL;
header->root = root;
sysctl_set_parent(NULL, header->ctl_table);
#ifdef CONFIG_SYSCTL_SYSCALL_CHECK
if (sysctl_check_table(namespaces, header->ctl_table)) {
kfree(header);
return NULL;
}
#endif
spin_lock(&sysctl_lock);
header_list = lookup_header_list(root, namespaces);
list_add_tail(&header->ctl_entry, header_list);
spin_unlock(&sysctl_lock);
return header;
}
/**
* register_sysctl_table_path - register a sysctl table hierarchy
* @path: The path to the directory the sysctl table is in.
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
* array. A completely 0 filled entry terminates the table.
*
* See __register_sysctl_paths for more details.
*/
struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
struct ctl_table *table)
{
return __register_sysctl_paths(&sysctl_table_root, current->nsproxy,
path, table);
}
/**
* register_sysctl_table - register a sysctl table hierarchy
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
* array. A completely 0 filled entry terminates the table.
*
* See register_sysctl_paths for more details.
*/
struct ctl_table_header *register_sysctl_table(struct ctl_table *table)
{
static const struct ctl_path null_path[] = { {} };
return register_sysctl_paths(null_path, table);
}
/**
* unregister_sysctl_table - unregister a sysctl table hierarchy
* @header: the header returned from register_sysctl_table
*
* Unregisters the sysctl table and all children. proc entries may not
* actually be removed until they are no longer used by anyone.
*/
void unregister_sysctl_table(struct ctl_table_header * header)
{
might_sleep();
if (header == NULL)
return;
spin_lock(&sysctl_lock);
start_unregistering(header);
spin_unlock(&sysctl_lock);
kfree(header);
}
#else /* !CONFIG_SYSCTL */
struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
{
return NULL;
}
struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
struct ctl_table *table)
{
return NULL;
}
void unregister_sysctl_table(struct ctl_table_header * table)
{
}
#endif /* CONFIG_SYSCTL */
/*
* /proc/sys support
*/
#ifdef CONFIG_PROC_SYSCTL
static int _proc_do_string(void* data, int maxlen, int write,
struct file *filp, void __user *buffer,
size_t *lenp, loff_t *ppos)
{
size_t len;
char __user *p;
char c;
if (!data || !maxlen || !*lenp) {
*lenp = 0;
return 0;
}
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
if (get_user(c, p++))
return -EFAULT;
if (c == 0 || c == '\n')
break;
len++;
}
if (len >= maxlen)
len = maxlen-1;
if(copy_from_user(data, buffer, len))
return -EFAULT;
((char *) data)[len] = 0;
*ppos += *lenp;
} else {
len = strlen(data);
if (len > maxlen)
len = maxlen;
if (*ppos > len) {
*lenp = 0;
return 0;
}
data += *ppos;
len -= *ppos;
if (len > *lenp)
len = *lenp;
if (len)
if(copy_to_user(buffer, data, len))
return -EFAULT;
if (len < *lenp) {
if(put_user('\n', ((char __user *) buffer) + len))
return -EFAULT;
len++;
}
*lenp = len;
*ppos += len;
}
return 0;
}
/**
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes a string from/to the user buffer. If the kernel
* buffer provided is not large enough to hold the string, the
* string is truncated. The copied string is %NULL-terminated.
* If the string is being read by the user process, it is copied
* and a newline '\n' is added. It is truncated if the buffer is
* not large enough.
*
* Returns 0 on success.
*/
int proc_dostring(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return _proc_do_string(table->data, table->maxlen, write, filp,
buffer, lenp, ppos);
}
static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
*valp = *negp ? -*lvalp : *lvalp;
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
int write, struct file *filp, void __user *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
#define TMPBUFLEN 21
int *i, vleft, first=1, neg, val;
unsigned long lval;
size_t left, len;
char buf[TMPBUFLEN], *p;
char __user *s = buffer;
if (!tbl_data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
*lenp = 0;
return 0;
}
i = (int *) tbl_data;
vleft = table->maxlen / sizeof(*i);
left = *lenp;
if (!conv)
conv = do_proc_dointvec_conv;
for (; left && vleft--; i++, first=0) {
if (write) {
while (left) {
char c;
if (get_user(c, s))
return -EFAULT;
if (!isspace(c))
break;
left--;
s++;
}
if (!left)
break;
neg = 0;
len = left;
if (len > sizeof(buf) - 1)
len = sizeof(buf) - 1;
if (copy_from_user(buf, s, len))
return -EFAULT;
buf[len] = 0;
p = buf;
if (*p == '-' && left > 1) {
neg = 1;
p++;
}
if (*p < '0' || *p > '9')
break;
lval = simple_strtoul(p, &p, 0);
len = p-buf;
if ((len < left) && *p && !isspace(*p))
break;
if (neg)
val = -val;
s += len;
left -= len;
if (conv(&neg, &lval, i, 1, data))
break;
} else {
p = buf;
if (!first)
*p++ = '\t';
if (conv(&neg, &lval, i, 0, data))
break;
sprintf(p, "%s%lu", neg ? "-" : "", lval);
len = strlen(buf);
if (len > left)
len = left;
if(copy_to_user(s, buf, len))
return -EFAULT;
left -= len;
s += len;
}
}
if (!write && !first && left) {
if(put_user('\n', s))
return -EFAULT;
left--, s++;
}
if (write) {
while (left) {
char c;
if (get_user(c, s++))
return -EFAULT;
if (!isspace(c))
break;
left--;
}
}
if (write && first)
return -EINVAL;
*lenp -= left;
*ppos += *lenp;
return 0;
#undef TMPBUFLEN
}
static int do_proc_dointvec(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
return __do_proc_dointvec(table->data, table, write, filp,
buffer, lenp, ppos, conv, data);
}
/**
* proc_dointvec - read a vector of integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* Returns 0 on success.
*/
int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
NULL,NULL);
}
#define OP_SET 0
#define OP_AND 1
#define OP_OR 2
static int do_proc_dointvec_bset_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
int op = *(int *)data;
if (write) {
int val = *negp ? -*lvalp : *lvalp;
switch(op) {
case OP_SET: *valp = val; break;
case OP_AND: *valp &= val; break;
case OP_OR: *valp |= val; break;
}
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
/*
* Taint values can only be increased
*/
static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int op;
if (write && !capable(CAP_SYS_ADMIN))
return -EPERM;
op = OP_OR;
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_bset_conv,&op);
}
struct do_proc_dointvec_minmax_conv_param {
int *min;
int *max;
};
static int do_proc_dointvec_minmax_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
struct do_proc_dointvec_minmax_conv_param *param = data;
if (write) {
int val = *negp ? -*lvalp : *lvalp;
if ((param->min && *param->min > val) ||
(param->max && *param->max < val))
return -EINVAL;
*valp = val;
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
/**
* proc_dointvec_minmax - read a vector of integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
do_proc_dointvec_minmax_conv, &param);
}
static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
#define TMPBUFLEN 21
unsigned long *i, *min, *max, val;
int vleft, first=1, neg;
size_t len, left;
char buf[TMPBUFLEN], *p;
char __user *s = buffer;
if (!data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
*lenp = 0;
return 0;
}
i = (unsigned long *) data;
min = (unsigned long *) table->extra1;
max = (unsigned long *) table->extra2;
vleft = table->maxlen / sizeof(unsigned long);
left = *lenp;
for (; left && vleft--; i++, min++, max++, first=0) {
if (write) {
while (left) {
char c;
if (get_user(c, s))
return -EFAULT;
if (!isspace(c))
break;
left--;
s++;
}
if (!left)
break;
neg = 0;
len = left;
if (len > TMPBUFLEN-1)
len = TMPBUFLEN-1;
if (copy_from_user(buf, s, len))
return -EFAULT;
buf[len] = 0;
p = buf;
if (*p == '-' && left > 1) {
neg = 1;
p++;
}
if (*p < '0' || *p > '9')
break;
val = simple_strtoul(p, &p, 0) * convmul / convdiv ;
len = p-buf;
if ((len < left) && *p && !isspace(*p))
break;
if (neg)
val = -val;
s += len;
left -= len;
if(neg)
continue;
if ((min && val < *min) || (max && val > *max))
continue;
*i = val;
} else {
p = buf;
if (!first)
*p++ = '\t';
sprintf(p, "%lu", convdiv * (*i) / convmul);
len = strlen(buf);
if (len > left)
len = left;
if(copy_to_user(s, buf, len))
return -EFAULT;
left -= len;
s += len;
}
}
if (!write && !first && left) {
if(put_user('\n', s))
return -EFAULT;
left--, s++;
}
if (write) {
while (left) {
char c;
if (get_user(c, s++))
return -EFAULT;
if (!isspace(c))
break;
left--;
}
}
if (write && first)
return -EINVAL;
*lenp -= left;
*ppos += *lenp;
return 0;
#undef TMPBUFLEN
}
static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
return __do_proc_doulongvec_minmax(table->data, table, write,
filp, buffer, lenp, ppos, convmul, convdiv);
}
/**
* proc_doulongvec_minmax - read a vector of long integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos, 1l, 1l);
}
/**
* proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string. The values
* are treated as milliseconds, and converted to jiffies when they are stored.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, filp, buffer,
lenp, ppos, HZ, 1000l);
}
static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (*lvalp > LONG_MAX / HZ)
return 1;
*valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = lval / HZ;
}
return 0;
}
static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (USER_HZ < HZ && *lvalp > (LONG_MAX / HZ) * USER_HZ)
return 1;
*valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_clock_t(lval);
}
return 0;
}
static int do_proc_dointvec_ms_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
*valp = msecs_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_msecs(lval);
}
return 0;
}
/**
* proc_dointvec_jiffies - read a vector of integers as seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in seconds, and are converted into
* jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_jiffies_conv,NULL);
}
/**
* proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: pointer to the file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/USER_HZ seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_userhz_jiffies_conv,NULL);
}
/**
* proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
* @ppos: the current position in the file
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/1000 seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_conv, NULL);
}
static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct pid *new_pid;
pid_t tmp;
int r;
tmp = pid_vnr(cad_pid);
r = __do_proc_dointvec(&tmp, table, write, filp, buffer,
lenp, ppos, NULL, NULL);
if (r || !write)
return r;
new_pid = find_get_pid(tmp);
if (!new_pid)
return -ESRCH;
put_pid(xchg(&cad_pid, new_pid));
return 0;
}
#else /* CONFIG_PROC_FS */
int proc_dostring(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_SYSCTL_SYSCALL
/*
* General sysctl support routines
*/
/* The generic sysctl data routine (used if no strategy routine supplied) */
int sysctl_data(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
size_t len;
/* Get out of I don't have a variable */
if (!table->data || !table->maxlen)
return -ENOTDIR;
if (oldval && oldlenp) {
if (get_user(len, oldlenp))
return -EFAULT;
if (len) {
if (len > table->maxlen)
len = table->maxlen;
if (copy_to_user(oldval, table->data, len))
return -EFAULT;
if (put_user(len, oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
if (newlen > table->maxlen)
newlen = table->maxlen;
if (copy_from_user(table->data, newval, newlen))
return -EFAULT;
}
return 1;
}
/* The generic string strategy routine: */
int sysctl_string(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (!table->data || !table->maxlen)
return -ENOTDIR;
if (oldval && oldlenp) {
size_t bufsize;
if (get_user(bufsize, oldlenp))
return -EFAULT;
if (bufsize) {
size_t len = strlen(table->data), copied;
/* This shouldn't trigger for a well-formed sysctl */
if (len > table->maxlen)
len = table->maxlen;
/* Copy up to a max of bufsize-1 bytes of the string */
copied = (len >= bufsize) ? bufsize - 1 : len;
if (copy_to_user(oldval, table->data, copied) ||
put_user(0, (char __user *)(oldval + copied)))
return -EFAULT;
if (put_user(len, oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
size_t len = newlen;
if (len > table->maxlen)
len = table->maxlen;
if(copy_from_user(table->data, newval, len))
return -EFAULT;
if (len == table->maxlen)
len--;
((char *) table->data)[len] = 0;
}
return 1;
}
/*
* This function makes sure that all of the integers in the vector
* are between the minimum and maximum values given in the arrays
* table->extra1 and table->extra2, respectively.
*/
int sysctl_intvec(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (newval && newlen) {
int __user *vec = (int __user *) newval;
int *min = (int *) table->extra1;
int *max = (int *) table->extra2;
size_t length;
int i;
if (newlen % sizeof(int) != 0)
return -EINVAL;
if (!table->extra1 && !table->extra2)
return 0;
if (newlen > table->maxlen)
newlen = table->maxlen;
length = newlen / sizeof(int);
for (i = 0; i < length; i++) {
int value;
if (get_user(value, vec + i))
return -EFAULT;
if (min && value < min[i])
return -EINVAL;
if (max && value > max[i])
return -EINVAL;
}
}
return 0;
}
/* Strategy function to convert jiffies to seconds */
int sysctl_jiffies(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t olen;
if (get_user(olen, oldlenp))
return -EFAULT;
if (olen) {
int val;
if (olen < sizeof(int))
return -EINVAL;
val = *(int *)(table->data) / HZ;
if (put_user(val, (int __user *)oldval))
return -EFAULT;
if (put_user(sizeof(int), oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
int new;
if (newlen != sizeof(int))
return -EINVAL;
if (get_user(new, (int __user *)newval))
return -EFAULT;
*(int *)(table->data) = new*HZ;
}
return 1;
}
/* Strategy function to convert jiffies to seconds */
int sysctl_ms_jiffies(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t olen;
if (get_user(olen, oldlenp))
return -EFAULT;
if (olen) {
int val;
if (olen < sizeof(int))
return -EINVAL;
val = jiffies_to_msecs(*(int *)(table->data));
if (put_user(val, (int __user *)oldval))
return -EFAULT;
if (put_user(sizeof(int), oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
int new;
if (newlen != sizeof(int))
return -EINVAL;
if (get_user(new, (int __user *)newval))
return -EFAULT;
*(int *)(table->data) = msecs_to_jiffies(new);
}
return 1;
}
#else /* CONFIG_SYSCTL_SYSCALL */
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
struct __sysctl_args tmp;
int error;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
error = deprecated_sysctl_warning(&tmp);
/* If no error reading the parameters then just -ENOSYS ... */
if (!error)
error = -ENOSYS;
return error;
}
int sysctl_data(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_string(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_intvec(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_jiffies(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_ms_jiffies(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
#endif /* CONFIG_SYSCTL_SYSCALL */
static int deprecated_sysctl_warning(struct __sysctl_args *args)
{
static int msg_count;
int name[CTL_MAXNAME];
int i;
/* Check args->nlen. */
if (args->nlen < 0 || args->nlen > CTL_MAXNAME)
return -ENOTDIR;
/* Read in the sysctl name for better debug message logging */
for (i = 0; i < args->nlen; i++)
if (get_user(name[i], args->name + i))
return -EFAULT;
/* Ignore accesses to kernel.version */
if ((args->nlen == 2) && (name[0] == CTL_KERN) && (name[1] == KERN_VERSION))
return 0;
if (msg_count < 5) {
msg_count++;
printk(KERN_INFO
"warning: process `%s' used the deprecated sysctl "
"system call with ", current->comm);
for (i = 0; i < args->nlen; i++)
printk("%d.", name[i]);
printk("\n");
}
return 0;
}
/*
* No sense putting this after each symbol definition, twice,
* exception granted :-)
*/
EXPORT_SYMBOL(proc_dointvec);
EXPORT_SYMBOL(proc_dointvec_jiffies);
EXPORT_SYMBOL(proc_dointvec_minmax);
EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);
EXPORT_SYMBOL(proc_dointvec_ms_jiffies);
EXPORT_SYMBOL(proc_dostring);
EXPORT_SYMBOL(proc_doulongvec_minmax);
EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax);
EXPORT_SYMBOL(register_sysctl_table);
EXPORT_SYMBOL(register_sysctl_paths);
EXPORT_SYMBOL(sysctl_intvec);
EXPORT_SYMBOL(sysctl_jiffies);
EXPORT_SYMBOL(sysctl_ms_jiffies);
EXPORT_SYMBOL(sysctl_string);
EXPORT_SYMBOL(sysctl_data);
EXPORT_SYMBOL(unregister_sysctl_table);