kernel-fxtec-pro1x/drivers/mfd/omap-usb-host.c

821 lines
21 KiB
C
Raw Normal View History

/**
* omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
mfd: Fix omap-usb-host build failure The patch fixes the build failure: drivers/mfd/omap-usb-host.c:1034:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1034:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/mfd/omap-usb-host.c:1034:1: warning: parameter names (without types) in function declaration drivers/mfd/omap-usb-host.c:1040:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1040:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/mfd/omap-usb-host.c:1040:1: warning: parameter names (without types) in function declaration drivers/mfd/omap-usb-host.c:1045:13: error: 'THIS_MODULE' undeclared here (not in a function) drivers/mfd/omap-usb-host.c:1050:15: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1050:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1050:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mfd/omap-usb-host.c:1050:15: warning: function declaration isn't a prototype drivers/mfd/omap-usb-host.c:1051:14: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1051:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1051:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/mfd/omap-usb-host.c:1051:14: warning: function declaration isn't a prototype drivers/mfd/omap-usb-host.c:1052:16: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1052:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1052:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/mfd/omap-usb-host.c:1052:16: warning: function declaration isn't a prototype drivers/mfd/omap-usb-host.c:1053:20: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1053:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1053:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/mfd/omap-usb-host.c:1053:20: warning: function declaration isn't a prototype make[2]: *** [drivers/mfd/omap-usb-host.o] Error 1 CC fs/proc/namespaces.o make[1]: *** [drivers/mfd] Error 2 make: *** [drivers] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-19 02:57:54 -06:00
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
#include "omap-usb.h"
#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
/* OMAP USBHOST Register addresses */
/* UHH Register Set */
#define OMAP_UHH_REVISION (0x00)
#define OMAP_UHH_SYSCONFIG (0x10)
#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP_UHH_SYSSTATUS (0x14)
#define OMAP_UHH_HOSTCONFIG (0x40)
#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31)
/* OMAP4-specific defines */
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
#define OMAP4_P1_MODE_CLEAR (3 << 16)
#define OMAP4_P1_MODE_TLL (1 << 16)
#define OMAP4_P1_MODE_HSIC (3 << 16)
#define OMAP4_P2_MODE_CLEAR (3 << 18)
#define OMAP4_P2_MODE_TLL (1 << 18)
#define OMAP4_P2_MODE_HSIC (3 << 18)
#define OMAP_UHH_DEBUG_CSR (0x44)
/* Values of UHH_REVISION - Note: these are not given in the TRM */
#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */
#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */
#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1)
#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2)
#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY)
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
struct usbhs_hcd_omap {
int nports;
struct clk **utmi_clk;
struct clk **hsic60m_clk;
struct clk **hsic480m_clk;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_gfclk;
struct clk *utmi_p2_gfclk;
struct clk *init_60m_fclk;
struct clk *ehci_logic_fck;
void __iomem *uhh_base;
struct usbhs_omap_platform_data *pdata;
u32 usbhs_rev;
};
/*-------------------------------------------------------------------------*/
const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
static u64 usbhs_dmamask = DMA_BIT_MASK(32);
/*-------------------------------------------------------------------------*/
static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
{
__raw_writel(val, base + reg);
}
static inline u32 usbhs_read(void __iomem *base, u32 reg)
{
return __raw_readl(base + reg);
}
static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
{
__raw_writeb(val, base + reg);
}
static inline u8 usbhs_readb(void __iomem *base, u8 reg)
{
return __raw_readb(base + reg);
}
/*-------------------------------------------------------------------------*/
static struct platform_device *omap_usbhs_alloc_child(const char *name,
struct resource *res, int num_resources, void *pdata,
size_t pdata_size, struct device *dev)
{
struct platform_device *child;
int ret;
child = platform_device_alloc(name, 0);
if (!child) {
dev_err(dev, "platform_device_alloc %s failed\n", name);
goto err_end;
}
ret = platform_device_add_resources(child, res, num_resources);
if (ret) {
dev_err(dev, "platform_device_add_resources failed\n");
goto err_alloc;
}
ret = platform_device_add_data(child, pdata, pdata_size);
if (ret) {
dev_err(dev, "platform_device_add_data failed\n");
goto err_alloc;
}
child->dev.dma_mask = &usbhs_dmamask;
dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
child->dev.parent = dev;
ret = platform_device_add(child);
if (ret) {
dev_err(dev, "platform_device_add failed\n");
goto err_alloc;
}
return child;
err_alloc:
platform_device_put(child);
err_end:
return NULL;
}
static int omap_usbhs_alloc_children(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_omap_platform_data *pdata = dev->platform_data;
struct platform_device *ehci;
struct platform_device *ohci;
struct resource *res;
struct resource resources[2];
int ret;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
if (!res) {
dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
ret = -ENODEV;
goto err_end;
}
resources[0] = *res;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
if (!res) {
dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
ret = -ENODEV;
goto err_end;
}
resources[1] = *res;
ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
sizeof(*pdata), dev);
if (!ehci) {
dev_err(dev, "omap_usbhs_alloc_child failed\n");
ret = -ENOMEM;
goto err_end;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
if (!res) {
dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
ret = -ENODEV;
goto err_ehci;
}
resources[0] = *res;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
if (!res) {
dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
ret = -ENODEV;
goto err_ehci;
}
resources[1] = *res;
ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
sizeof(*pdata), dev);
if (!ohci) {
dev_err(dev, "omap_usbhs_alloc_child failed\n");
ret = -ENOMEM;
goto err_ehci;
}
return 0;
err_ehci:
platform_device_unregister(ehci);
err_end:
return ret;
}
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
return true;
default:
return false;
}
}
static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i, r;
dev_dbg(dev, "usbhs_runtime_resume\n");
omap_tll_enable();
if (!IS_ERR(omap->ehci_logic_fck))
clk_enable(omap->ehci_logic_fck);
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i])) {
r = clk_enable(omap->hsic60m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic60m clk:%d\n",
i, r);
}
}
if (!IS_ERR(omap->hsic480m_clk[i])) {
r = clk_enable(omap->hsic480m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic480m clk:%d\n",
i, r);
}
}
/* Fall through as HSIC mode needs utmi_clk */
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i])) {
r = clk_enable(omap->utmi_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d clk : %d\n",
i, r);
}
}
break;
default:
break;
}
}
return 0;
}
static int usbhs_runtime_suspend(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
dev_dbg(dev, "usbhs_runtime_suspend\n");
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_disable(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_disable(omap->hsic480m_clk[i]);
/* Fall through as utmi_clks were used in HSIC mode */
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i]))
clk_disable(omap->utmi_clk[i]);
break;
default:
break;
}
}
if (!IS_ERR(omap->ehci_logic_fck))
clk_disable(omap->ehci_logic_fck);
omap_tll_disable();
return 0;
}
static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
unsigned reg)
{
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_USBHS_PORT_MODE_UNUSED:
reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
break;
case OMAP_EHCI_PORT_MODE_PHY:
if (pdata->single_ulpi_bypass)
break;
if (i == 0)
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
else
reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
<< (i-1));
break;
default:
if (pdata->single_ulpi_bypass)
break;
if (i == 0)
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
else
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
<< (i-1);
break;
}
}
if (pdata->single_ulpi_bypass) {
/* bypass ULPI only if none of the ports use PHY mode */
reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
for (i = 0; i < omap->nports; i++) {
if (is_ehci_phy_mode(pdata->port_mode[i])) {
reg &= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
break;
}
}
}
return reg;
}
static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
unsigned reg)
{
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
for (i = 0; i < omap->nports; i++) {
/* Clear port mode fields for PHY mode */
reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
if (is_ehci_tll_mode(pdata->port_mode[i]) ||
(is_ohci_port(pdata->port_mode[i])))
reg |= OMAP4_P1_MODE_TLL << 2 * i;
else if (is_ehci_hsic_mode(pdata->port_mode[i]))
reg |= OMAP4_P1_MODE_HSIC << 2 * i;
}
return reg;
}
static void omap_usbhs_init(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
unsigned reg;
dev_dbg(dev, "starting TI HSUSB Controller\n");
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
gpio_request_one(pdata->reset_gpio_port[0],
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
if (gpio_is_valid(pdata->reset_gpio_port[1]))
gpio_request_one(pdata->reset_gpio_port[1],
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
}
pm_runtime_get_sync(dev);
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
omap_usbhs_rev1_hostconfig(omap, reg);
break;
case OMAP_USBHS_REV2:
omap_usbhs_rev2_hostconfig(omap, reg);
break;
default: /* newer revisions */
omap_usbhs_rev2_hostconfig(omap, reg);
break;
}
usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
pm_runtime_put_sync(dev);
if (pdata->phy_reset) {
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
/* Hold the PHY in RESET for enough time till
* PHY is settled and ready
*/
udelay(10);
if (gpio_is_valid(pdata->reset_gpio_port[0]))
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
gpio_set_value_cansleep
(pdata->reset_gpio_port[0], 1);
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
if (gpio_is_valid(pdata->reset_gpio_port[1]))
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
gpio_set_value_cansleep
(pdata->reset_gpio_port[1], 1);
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
}
}
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
static void omap_usbhs_deinit(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
gpio_free(pdata->reset_gpio_port[0]);
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
if (gpio_is_valid(pdata->reset_gpio_port[1]))
gpio_free(pdata->reset_gpio_port[1]);
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
}
}
/**
* usbhs_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller.
*/
static int usbhs_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_omap_platform_data *pdata = dev->platform_data;
struct usbhs_hcd_omap *omap;
struct resource *res;
int ret = 0;
int i;
bool need_logic_fck;
if (!pdata) {
dev_err(dev, "Missing platform data\n");
return -ENODEV;
}
omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
if (!omap) {
dev_err(dev, "Memory allocation failed\n");
return -ENOMEM;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
omap->uhh_base = devm_request_and_ioremap(dev, res);
if (!omap->uhh_base) {
dev_err(dev, "Resource request/ioremap failed\n");
return -EADDRNOTAVAIL;
}
omap->pdata = pdata;
pm_runtime_enable(dev);
platform_set_drvdata(pdev, omap);
pm_runtime_get_sync(dev);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
/* we need to call runtime suspend before we update omap->nports
* to prevent unbalanced clk_disable()
*/
pm_runtime_put_sync(dev);
/*
* If platform data contains nports then use that
* else make out number of ports from USBHS revision
*/
if (pdata->nports) {
omap->nports = pdata->nports;
} else {
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
omap->nports = 3;
break;
case OMAP_USBHS_REV2:
omap->nports = 2;
break;
default:
omap->nports = OMAP3_HS_USB_PORTS;
dev_dbg(dev,
"USB HOST Rev:0x%d not recognized, assuming %d ports\n",
omap->usbhs_rev, omap->nports);
break;
}
}
i = sizeof(struct clk *) * omap->nports;
omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
dev_err(dev, "Memory allocation failed\n");
ret = -ENOMEM;
goto err_mem;
}
need_logic_fck = false;
for (i = 0; i < omap->nports; i++) {
if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
is_ehci_hsic_mode(i))
need_logic_fck |= true;
}
omap->ehci_logic_fck = ERR_PTR(-EINVAL);
if (need_logic_fck) {
omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
if (IS_ERR(omap->ehci_logic_fck)) {
ret = PTR_ERR(omap->ehci_logic_fck);
dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
}
}
omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_gfclk)) {
ret = PTR_ERR(omap->utmi_p1_gfclk);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
goto err_p1_gfclk;
}
omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
if (IS_ERR(omap->utmi_p2_gfclk)) {
ret = PTR_ERR(omap->utmi_p2_gfclk);
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
goto err_p2_gfclk;
}
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
goto err_xclk60mhsp1;
}
omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
goto err_xclk60mhsp2;
}
omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
goto err_init60m;
}
for (i = 0; i < omap->nports; i++) {
char clkname[30];
/* clock names are indexed from 1*/
snprintf(clkname, sizeof(clkname),
"usb_host_hs_utmi_p%d_clk", i + 1);
/* If a clock is not found we won't bail out as not all
* platforms have all clocks and we can function without
* them
*/
omap->utmi_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->utmi_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->utmi_clk[i]));
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic480m_p%d_clk", i + 1);
omap->hsic480m_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->hsic480m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic480m_clk[i]));
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic60m_p%d_clk", i + 1);
omap->hsic60m_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->hsic60m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic60m_clk[i]));
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
/* for OMAP3, clk_set_parent fails */
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->xclk60mhsp1_ck);
if (ret != 0)
dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
ret);
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->init_60m_fclk);
if (ret != 0)
dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
ret);
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->xclk60mhsp2_ck);
if (ret != 0)
dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
ret);
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->init_60m_fclk);
if (ret != 0)
dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
ret);
}
omap_usbhs_init(dev);
ret = omap_usbhs_alloc_children(pdev);
if (ret) {
dev_err(dev, "omap_usbhs_alloc_children failed\n");
goto err_alloc;
}
return 0;
err_alloc:
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
omap_usbhs_deinit(&pdev->dev);
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_put(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_put(omap->hsic480m_clk[i]);
}
clk_put(omap->init_60m_fclk);
err_init60m:
clk_put(omap->xclk60mhsp2_ck);
err_xclk60mhsp2:
clk_put(omap->xclk60mhsp1_ck);
err_xclk60mhsp1:
clk_put(omap->utmi_p2_gfclk);
err_p2_gfclk:
clk_put(omap->utmi_p1_gfclk);
err_p1_gfclk:
if (!IS_ERR(omap->ehci_logic_fck))
clk_put(omap->ehci_logic_fck);
err_mem:
pm_runtime_disable(dev);
return ret;
}
/**
* usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
* @pdev: USB Host Controller being removed
*
* Reverses the effect of usbhs_omap_probe().
*/
static int usbhs_omap_remove(struct platform_device *pdev)
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
int i;
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-14 10:24:21 -06:00
omap_usbhs_deinit(&pdev->dev);
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_put(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_put(omap->hsic480m_clk[i]);
}
clk_put(omap->init_60m_fclk);
clk_put(omap->utmi_p1_gfclk);
clk_put(omap->utmi_p2_gfclk);
clk_put(omap->xclk60mhsp2_ck);
clk_put(omap->xclk60mhsp1_ck);
if (!IS_ERR(omap->ehci_logic_fck))
clk_put(omap->ehci_logic_fck);
pm_runtime_disable(&pdev->dev);
return 0;
}
static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
.runtime_suspend = usbhs_runtime_suspend,
.runtime_resume = usbhs_runtime_resume,
};
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
.pm = &usbhsomap_dev_pm_ops,
},
.remove = usbhs_omap_remove,
};
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
static int __init omap_usbhs_drvinit(void)
{
return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
}
/*
* init before ehci and ohci drivers;
* The usbhs core driver should be initialized much before
* the omap ehci and ohci probe functions are called.
* This usbhs core driver should be initialized after
* usb tll driver
*/
fs_initcall_sync(omap_usbhs_drvinit);
static void __exit omap_usbhs_drvexit(void)
{
platform_driver_unregister(&usbhs_omap_driver);
}
module_exit(omap_usbhs_drvexit);